This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are ba...This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are based on conservation of energy. Heat transfer analysis for the piston pump is also given in the paper in which the heat flow inside the piston pump is described precisely. The theoretical basis and modeling stratagy are applied in a typical thermal-hydraulic circuit containing the piston pump. Simulation results are presented which show a comparison of model/rig performance and the agreement obtained demonstrates the validity of the modeling approach.展开更多
The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions： The water pressure in cylinder has great instantaneous pulsation and phase s...The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions： The water pressure in cylinder has great instantaneous pulsation and phase step when outlet valve or inlet valve opens, but is more gently in other time; The volume efficiency is influenced by the output pressure slightly, and decreases as the working rotational speed increases; When the inherent frequency of the valves is integer multiple of the working frequency, the volume efficiency of system will decrease evidently.展开更多
The current research of large eddy simulation （LES） of turbulent flow in pumps mainly concentrates in applying conventional subgrid-scale （SGS） model to simulate turbulent flow, which aims at obtaining the flow fi...The current research of large eddy simulation （LES） of turbulent flow in pumps mainly concentrates in applying conventional subgrid-scale （SGS） model to simulate turbulent flow, which aims at obtaining the flow field in pump. The selection of SGS model is usually not considered seriously, so the accuracy and efficiency of the simulation cannot be ensured. Three SGS models including Smagorinsky-Lilly model, dynamic Smagorinsky model and dynamic mixed model are comparably studied by using the commercial CFD code Fluent combined with its user define function. The simulations are performed for the turbulent flow in a centrifugal pump impeller. The simulation results indicate that the mean flows predicted by the three SGS models agree well with the experimental data obtained from the test that detailed measurements of the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller performed using particle image velocimetry （PIV） and laser Doppler velocimetry （LDV）. The comparable results show that dynamic mixed model gives the most accurate results for mean flow in the centrifugal pump impeller. The SGS stress of dynamic mixed model is decompose into the scale similar part and the eddy viscous part. The scale similar part of SGS stress plays a significant role in high curvature regions, such as the leading edge and training edge of pump blade. It is also found that the dynamic mixed model is more adaptive to compute turbulence in the pump impeller. The research results presented is useful to improve the computational accuracy and efficiency of LES for centrifugal pumps, and provide important reference for carrying out simulation in similar fluid machineries.展开更多
Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sa...Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sauer cavitation model were combined with ANSYS CFX. To evaluate the modified and standard k-co models, numerical simulations were performed with these two models, respectively, and the calculation results were compared with the experimental data. Numerical simulations were executed with three different values of the flow coefficient, and the simulation results of the modified k-ω model showed agreement with most of the experimental data. The cavitating flow in the centrifugal pump obtained by the modified k-ω model at the design flow coefficient of 0.102, was analyzed. When the cavitation number decreases, the cavity initially generates on the suction side of the blade near the leading edge and then expands to the outlet of the impeller, and the decrease of the total pressure coefficient mainly occurs upstream of the impeller passage, while the downstream remains almost unaffected by the development of cavitation.展开更多
Experimental studies of a model pump-turbine S-curve characteristics and its improvement by misaligned guide vanes （MGV） were extended to prototype pump turbine through 3-D transient flow simulations. The unsteady R...Experimental studies of a model pump-turbine S-curve characteristics and its improvement by misaligned guide vanes （MGV） were extended to prototype pump turbine through 3-D transient flow simulations. The unsteady Reynolds-averaged Navier-Stokes equations with the SST turbulence model were used to model the transient flow within the entire flow passage of a reversible pump-turbine with and without misaligned guide vanes during turbine model start-up. The unstable S-curve and its improvement by using misaligned guide vane were verified by model test and simulation. The transient flow calculations were used to clarify the variations of pressure pulse and internal flow behavior in the entire flow passage. The use of misaligned guide vanes can eliminate the S-curve characteristics of a pump-turbine, and can significantly increase the pressure pulse amplitude in the entire flow passage and the runner radial forces during start-up. The MGV only decreased the pulse amplitude on the guide vane suction side when the rotating speed was less than 50% rated speed. The hydraulic reason is that the MGV dramatically changed the flow patterns inside the entire flow passage, and destroyed the symmetry of the flow distribution inside the guide vane and runner.展开更多
A mathematical model is set to evaluate the overall centrifugal pumpingsystem using asynchronous motor as power. This method can be used to affirm system performanceaccording the transform and the aberrance of interio...A mathematical model is set to evaluate the overall centrifugal pumpingsystem using asynchronous motor as power. This method can be used to affirm system performanceaccording the transform and the aberrance of interior parameters and exterior performance curves soas to give a reference to the equipment amelioration. The analysis of emulation experiment datasuggests the model is effectively used.展开更多
The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stat...The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.展开更多
The determination of aquifer parameters is the basis for groundwater resource evaluation,development and protection as well as scientific management. Pumping test is a main method to determine the aquifer parameters.H...The determination of aquifer parameters is the basis for groundwater resource evaluation,development and protection as well as scientific management. Pumping test is a main method to determine the aquifer parameters.However,the analytic methods can’t be used to describe the heterogeneous and spatial variant of the parameters in detail.The aquifer parameters derived from analytic methods may lead much uncertainty of groundwater resource evaluation.展开更多
This paper made a research on the Intelligent Optimization Operating Modeling of Pumped Storage Power Station in Hunan Power Grid. First it introduces the characteristics of Hunan power grid and analysis the practical...This paper made a research on the Intelligent Optimization Operating Modeling of Pumped Storage Power Station in Hunan Power Grid. First it introduces the characteristics of Hunan power grid and analysis the practical requirement of dispatching. Then it brings forward the intelligent optimization model and set up running model for pumped storage power station of Hei Mi-feng. At last, it introduces the application of pumped storage power station in Hunan power grid and proves the effectiveness of the optimization models.展开更多
In the proposed paper, the new experimental results are described obtained from the laboratory stand and the model developed by the authors. A method of acquiring characteristics of a pump motor drive using a hardware...In the proposed paper, the new experimental results are described obtained from the laboratory stand and the model developed by the authors. A method of acquiring characteristics of a pump motor drive using a hardware-in-the-loop simulation approach is explained. To explore the centrifugal pumps manufactured by ABB, their own control system is used whereas an industrial pump is replaced with the specially designed simulator. To clarify the model topology and parameters, a double-machine assembly was designed and used as universal pump prototype. A library of reference and disturbance signals used in pumping was applied as a modeling tool. In this way, the advantages of mathematical and physical simulations have been combined with optimal interaction of both approaches.展开更多
The origin and movement of groundwater are the fundamental questions that address both the temporal and spatial aspects of ground water run and water supply related issues in hydrological systems.As groundwater flows ...The origin and movement of groundwater are the fundamental questions that address both the temporal and spatial aspects of ground water run and water supply related issues in hydrological systems.As groundwater flows through an aquifer,its composition and temperature may variation dependent on the aquifer condition through which it flows.Thus,hydrologic investigations can also provide useful information about the subsurface geology of a region.But because such studies investigate processes that follow under the Earth's shallow,obtaining the information necessary to answer these questions is not continuously easy.Springs,which discharge groundwater table directly,afford to study subsurface hydrogeological processes.The present study of estimation of aquifer factors such as transmissivity(T)and storativity(S)are vital for the evaluation of groundwater resources.There are several methods to estimate the accurate aquifer parameters(i.e.hydrograph analysis,pumping test,etc.).In initial days,these parameters are projected either by means of in-situ test or execution test on aquifer well samples carried in the laboratory.The simultaneous information on the hydraulic behavior of the well(borehole)that provides on this method,the reservoir and the reservoir boundaries,are important for efficient aquifer and well data management and analysis.The most common in-situ test is pumping test performed on wells,which involves the measurement of the fall and increase of groundwater level with respect to time.The alteration in groundwater level(drawdown/recovery)is caused due to pumping of water from the well.Theis(1935)was first to propose method to evaluate aquifer parameters from the pumping test on a bore well in a confined aquifer.It is essential to know the transmissivity(T=Kb,where b is the aquifer thickness;pumping flow rate,Q=TW(dh/dl)flow through an aquifer)and storativity(confined aquifer:S=bS_s,unconfined:S=S_y),for the characterization of the aquifer parameters in an unknown area so as to predict the rate of drawdown of the groundwater table/potentiometric surface throughout the pumping test of an aquifer.The determination of aquifer's parameters is an important basis for groundwater resources evaluation,numerical simulation,development and protection as well as scientific management.For determining aquifer's parameters,pumping test is a main method.A case study shows that these techniques have been fast speed and high correctness.The results of parameter's determination are optimized so that it has important applied value for scientific research and geology engineering preparation.展开更多
The main purpose of this paper is to design and model a water-pumping system using a submersible multi-stage centrifugal pump driven by a three-phase induction motor. The system is intended for pumping water to the su...The main purpose of this paper is to design and model a water-pumping system using a submersible multi-stage centrifugal pump driven by a three-phase induction motor. The system is intended for pumping water to the surface from a deep well using three power supply systems: a general network, a photo-voltaic (PV) system, and a PV system with a battery bank. These systems are used to compare two three-phase induction motors—namely, a motor with a drive and another one without a drive. The systems dynamic models are simulated in MATLAB/Simulink and the results compared with the manufacturer’s data for validation purposes. The simulation results generally show system dynamics and expected performance over a range of operation.展开更多
Sediment deposition in the pumping station has a huge negative impact on unit operation.The three-dimensional CFD method has been used to simulate inlet structure flow in pumping station based on the Eulerian solid- l...Sediment deposition in the pumping station has a huge negative impact on unit operation.The three-dimensional CFD method has been used to simulate inlet structure flow in pumping station based on the Eulerian solid- liquid two-phase flow model. The numerical results of the preliminary scheme show that sediment deposition occurs in the forebay of pumping station because of poor flow pattern therein. In order to improve hydraulic configuration in the forebay,one modified measure reconstructs water diversion weir shape,and another measure sets a water retaining sill in the approach channel. The simulation results of the modified scheme prove that back flow in the forebay has been eliminated and the sediment deposition region has also been reduced.展开更多
To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they ...To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.展开更多
抽水蓄能作为电力系统中最为成熟的新能源储能技术,凭借其能调节电网负荷、平衡电力波动及提升系统稳定性的独特优势,已成为实现中国“双碳”目标的重要路径之一。因此,对抽水蓄能电站综合效益进行科学评估,是项目决策及政策制定中至关...抽水蓄能作为电力系统中最为成熟的新能源储能技术,凭借其能调节电网负荷、平衡电力波动及提升系统稳定性的独特优势,已成为实现中国“双碳”目标的重要路径之一。因此,对抽水蓄能电站综合效益进行科学评估,是项目决策及政策制定中至关重要的一环。为此,本文提出一种基于博弈论组合赋权‒云模型的综合效益评价模型。首先,运用社会网络分析法(SNA)筛选关键评价指标,构建包含财务评价、国民经济评价、技术效益、动态效益、静态效益、电网效益、综合可持续性效益和社会效益8个1级指标及其下属30个2级指标的评价指标体系。其次,采用序关系分析(G1)法和CRITIC(criteria importance through intercriteria correlation)法相结合的方式,对各评价指标进行主观与客观权重赋值。通过引入博弈论组合赋权方法,进一步优化各指标的权重分配。最终,基于云模型构建综合效益评价模型。利用博弈论组合赋权‒云模型对紫云山抽水蓄能电站进行实例分析,结果表明,该电站的综合效益评估等级为“好”,与实际情况相符,充分验证了所构建模型的有效性与准确性。该研究不仅为抽水蓄能电站的综合效益评估提供了科学的评估框架,并为类似项目的决策和实施提供了理论支持和实践依据。展开更多
文摘This paper presents a kind of modeling approach to the study of the thermal-hydraulic piston pump which is used in the airplane comprehensively. A set of lumped parameter mathematical models are developed which are based on conservation of energy. Heat transfer analysis for the piston pump is also given in the paper in which the heat flow inside the piston pump is described precisely. The theoretical basis and modeling stratagy are applied in a typical thermal-hydraulic circuit containing the piston pump. Simulation results are presented which show a comparison of model/rig performance and the agreement obtained demonstrates the validity of the modeling approach.
基金This project is supported by National Natural Science Foundation of China(No.10342003).
文摘The dynamics differential equations are constructed, and the initial conditions are also given. Simulation shows the following conclusions： The water pressure in cylinder has great instantaneous pulsation and phase step when outlet valve or inlet valve opens, but is more gently in other time; The volume efficiency is influenced by the output pressure slightly, and decreases as the working rotational speed increases; When the inherent frequency of the valves is integer multiple of the working frequency, the volume efficiency of system will decrease evidently.
基金supported by National Natural Science Foundation of China (Grant Nos. 51139007, 51079151, 51079152)Research Fundfor the Doctoral Program of Higher Education of China (Grant No. 0100008110012)
文摘The current research of large eddy simulation （LES） of turbulent flow in pumps mainly concentrates in applying conventional subgrid-scale （SGS） model to simulate turbulent flow, which aims at obtaining the flow field in pump. The selection of SGS model is usually not considered seriously, so the accuracy and efficiency of the simulation cannot be ensured. Three SGS models including Smagorinsky-Lilly model, dynamic Smagorinsky model and dynamic mixed model are comparably studied by using the commercial CFD code Fluent combined with its user define function. The simulations are performed for the turbulent flow in a centrifugal pump impeller. The simulation results indicate that the mean flows predicted by the three SGS models agree well with the experimental data obtained from the test that detailed measurements of the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller performed using particle image velocimetry （PIV） and laser Doppler velocimetry （LDV）. The comparable results show that dynamic mixed model gives the most accurate results for mean flow in the centrifugal pump impeller. The SGS stress of dynamic mixed model is decompose into the scale similar part and the eddy viscous part. The scale similar part of SGS stress plays a significant role in high curvature regions, such as the leading edge and training edge of pump blade. It is also found that the dynamic mixed model is more adaptive to compute turbulence in the pump impeller. The research results presented is useful to improve the computational accuracy and efficiency of LES for centrifugal pumps, and provide important reference for carrying out simulation in similar fluid machineries.
基金supported by the National Natural Science Foundation of China (Grants No. 51179075 and 51239005) A Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Considering the compressibility of the cavity in the cavitating flow, this paper presents a modified k-ω model for predicting the cavitating flow in a centrifugal pump, in which the modified k-ω model and Schnerr-Sauer cavitation model were combined with ANSYS CFX. To evaluate the modified and standard k-co models, numerical simulations were performed with these two models, respectively, and the calculation results were compared with the experimental data. Numerical simulations were executed with three different values of the flow coefficient, and the simulation results of the modified k-ω model showed agreement with most of the experimental data. The cavitating flow in the centrifugal pump obtained by the modified k-ω model at the design flow coefficient of 0.102, was analyzed. When the cavitation number decreases, the cavity initially generates on the suction side of the blade near the leading edge and then expands to the outlet of the impeller, and the decrease of the total pressure coefficient mainly occurs upstream of the impeller passage, while the downstream remains almost unaffected by the development of cavitation.
基金supported by the National Natural Science Foundation of China(51009077)State Key Laboratory of Hydroscience and Engineering(2014-KY-05)
文摘Experimental studies of a model pump-turbine S-curve characteristics and its improvement by misaligned guide vanes （MGV） were extended to prototype pump turbine through 3-D transient flow simulations. The unsteady Reynolds-averaged Navier-Stokes equations with the SST turbulence model were used to model the transient flow within the entire flow passage of a reversible pump-turbine with and without misaligned guide vanes during turbine model start-up. The unstable S-curve and its improvement by using misaligned guide vane were verified by model test and simulation. The transient flow calculations were used to clarify the variations of pressure pulse and internal flow behavior in the entire flow passage. The use of misaligned guide vanes can eliminate the S-curve characteristics of a pump-turbine, and can significantly increase the pressure pulse amplitude in the entire flow passage and the runner radial forces during start-up. The MGV only decreased the pulse amplitude on the guide vane suction side when the rotating speed was less than 50% rated speed. The hydraulic reason is that the MGV dramatically changed the flow patterns inside the entire flow passage, and destroyed the symmetry of the flow distribution inside the guide vane and runner.
文摘A mathematical model is set to evaluate the overall centrifugal pumpingsystem using asynchronous motor as power. This method can be used to affirm system performanceaccording the transform and the aberrance of interior parameters and exterior performance curves soas to give a reference to the equipment amelioration. The analysis of emulation experiment datasuggests the model is effectively used.
基金National Nature Science Foundation of China(No.61175125) 2010 Major Project of Yuhang City Technology Division of China
文摘The research object used in the dissertation was screw pump, which was widely applied in engineering field. The analysis of end face profile formation was completed on its main working components, i.e., rotor and stator. With the purpose of finding optimal parameters to improve the efficiency of screw pump design, the key technologies involved in the parametric modeling of rotor and stator were analyzed. The three-dimensional (3D) design software SolidWorks was used for the secondary development and parametric modeling of rotor and stator. After that the simulation models of different kinds of screw pumps were established based on the cycloid type, variation coefficient, and screw head number. Finally the COSMOSMotion was used to analyze the motion characteristics on the equidistant line of rotor, including velocity and acceleration. This design and modeling method has been used in screw pump enterprises for design and development, laying the foundation for finite element analysis and further optimization of screw pump.
文摘The determination of aquifer parameters is the basis for groundwater resource evaluation,development and protection as well as scientific management. Pumping test is a main method to determine the aquifer parameters.However,the analytic methods can’t be used to describe the heterogeneous and spatial variant of the parameters in detail.The aquifer parameters derived from analytic methods may lead much uncertainty of groundwater resource evaluation.
文摘This paper made a research on the Intelligent Optimization Operating Modeling of Pumped Storage Power Station in Hunan Power Grid. First it introduces the characteristics of Hunan power grid and analysis the practical requirement of dispatching. Then it brings forward the intelligent optimization model and set up running model for pumped storage power station of Hei Mi-feng. At last, it introduces the application of pumped storage power station in Hunan power grid and proves the effectiveness of the optimization models.
文摘In the proposed paper, the new experimental results are described obtained from the laboratory stand and the model developed by the authors. A method of acquiring characteristics of a pump motor drive using a hardware-in-the-loop simulation approach is explained. To explore the centrifugal pumps manufactured by ABB, their own control system is used whereas an industrial pump is replaced with the specially designed simulator. To clarify the model topology and parameters, a double-machine assembly was designed and used as universal pump prototype. A library of reference and disturbance signals used in pumping was applied as a modeling tool. In this way, the advantages of mathematical and physical simulations have been combined with optimal interaction of both approaches.
文摘The origin and movement of groundwater are the fundamental questions that address both the temporal and spatial aspects of ground water run and water supply related issues in hydrological systems.As groundwater flows through an aquifer,its composition and temperature may variation dependent on the aquifer condition through which it flows.Thus,hydrologic investigations can also provide useful information about the subsurface geology of a region.But because such studies investigate processes that follow under the Earth's shallow,obtaining the information necessary to answer these questions is not continuously easy.Springs,which discharge groundwater table directly,afford to study subsurface hydrogeological processes.The present study of estimation of aquifer factors such as transmissivity(T)and storativity(S)are vital for the evaluation of groundwater resources.There are several methods to estimate the accurate aquifer parameters(i.e.hydrograph analysis,pumping test,etc.).In initial days,these parameters are projected either by means of in-situ test or execution test on aquifer well samples carried in the laboratory.The simultaneous information on the hydraulic behavior of the well(borehole)that provides on this method,the reservoir and the reservoir boundaries,are important for efficient aquifer and well data management and analysis.The most common in-situ test is pumping test performed on wells,which involves the measurement of the fall and increase of groundwater level with respect to time.The alteration in groundwater level(drawdown/recovery)is caused due to pumping of water from the well.Theis(1935)was first to propose method to evaluate aquifer parameters from the pumping test on a bore well in a confined aquifer.It is essential to know the transmissivity(T=Kb,where b is the aquifer thickness;pumping flow rate,Q=TW(dh/dl)flow through an aquifer)and storativity(confined aquifer:S=bS_s,unconfined:S=S_y),for the characterization of the aquifer parameters in an unknown area so as to predict the rate of drawdown of the groundwater table/potentiometric surface throughout the pumping test of an aquifer.The determination of aquifer's parameters is an important basis for groundwater resources evaluation,numerical simulation,development and protection as well as scientific management.For determining aquifer's parameters,pumping test is a main method.A case study shows that these techniques have been fast speed and high correctness.The results of parameter's determination are optimized so that it has important applied value for scientific research and geology engineering preparation.
文摘The main purpose of this paper is to design and model a water-pumping system using a submersible multi-stage centrifugal pump driven by a three-phase induction motor. The system is intended for pumping water to the surface from a deep well using three power supply systems: a general network, a photo-voltaic (PV) system, and a PV system with a battery bank. These systems are used to compare two three-phase induction motors—namely, a motor with a drive and another one without a drive. The systems dynamic models are simulated in MATLAB/Simulink and the results compared with the manufacturer’s data for validation purposes. The simulation results generally show system dynamics and expected performance over a range of operation.
基金Chinese National Foundation of Natural Science-Key Projects(51339005)
文摘Sediment deposition in the pumping station has a huge negative impact on unit operation.The three-dimensional CFD method has been used to simulate inlet structure flow in pumping station based on the Eulerian solid- liquid two-phase flow model. The numerical results of the preliminary scheme show that sediment deposition occurs in the forebay of pumping station because of poor flow pattern therein. In order to improve hydraulic configuration in the forebay,one modified measure reconstructs water diversion weir shape,and another measure sets a water retaining sill in the approach channel. The simulation results of the modified scheme prove that back flow in the forebay has been eliminated and the sediment deposition region has also been reduced.
基金Project(51175518)supported by the National Natural Science Foundation of China
文摘To increase the efficiency and reliability of the thermodynamics analysis of the hydraulic system, the method based on pseudo-bond graph is introduced. According to the working mechanism of hydraulic components, they can be separated into two categories: capacitive components and resistive components. Then, the thermal-hydraulic pseudo-bond graphs of capacitive C element and resistance R element were developed, based on the conservation of mass and energy. Subsequently, the connection rule for the pseudo-bond graph elements and the method to construct the complete thermal-hydraulic system model were proposed. On the basis of heat transfer analysis of a typical hydraulic circuit containing a piston pump, the lumped parameter mathematical model of the system was given. The good agreement between the simulation results and experimental data demonstrates the validity of the modeling method.
文摘抽水蓄能作为电力系统中最为成熟的新能源储能技术,凭借其能调节电网负荷、平衡电力波动及提升系统稳定性的独特优势,已成为实现中国“双碳”目标的重要路径之一。因此,对抽水蓄能电站综合效益进行科学评估,是项目决策及政策制定中至关重要的一环。为此,本文提出一种基于博弈论组合赋权‒云模型的综合效益评价模型。首先,运用社会网络分析法(SNA)筛选关键评价指标,构建包含财务评价、国民经济评价、技术效益、动态效益、静态效益、电网效益、综合可持续性效益和社会效益8个1级指标及其下属30个2级指标的评价指标体系。其次,采用序关系分析(G1)法和CRITIC(criteria importance through intercriteria correlation)法相结合的方式,对各评价指标进行主观与客观权重赋值。通过引入博弈论组合赋权方法,进一步优化各指标的权重分配。最终,基于云模型构建综合效益评价模型。利用博弈论组合赋权‒云模型对紫云山抽水蓄能电站进行实例分析,结果表明,该电站的综合效益评估等级为“好”,与实际情况相符,充分验证了所构建模型的有效性与准确性。该研究不仅为抽水蓄能电站的综合效益评估提供了科学的评估框架,并为类似项目的决策和实施提供了理论支持和实践依据。
