The gas heating mechanism in the pulse-modulated radio-frequency （rf） discharge at atmospheric pressure was inves- tigated with a one-dimensional two-temperature fluid model. Firstly, the spatiotemporal profiles of ...The gas heating mechanism in the pulse-modulated radio-frequency （rf） discharge at atmospheric pressure was inves- tigated with a one-dimensional two-temperature fluid model. Firstly, the spatiotemporal profiles of the gas temperature （Tg） in both consistent rf discharge and pulse-modulated rf discharge were compared. The results indicated that Tg decreases considerably with the pulse-modulated power, and the elastic collision mechanism plays a more important role in the gas heating change. Secondly, the influences of the duty cycle on the discharge parameters, especially on the Tg, were studied. It was found that Tg decreases almost linearly with the reduction of the duty cycle, and there exists one ideal value of the duty cycle, by which both the Tg can be adjusted and the glow mode can be sustained. Thirdly, the discharge mode changing from αto γ mode in the pulse-modulated rf discharge was investigated, the spatial distributions of Tg in the two modes show different features and the ion Joule heating is more important during the mode transition.展开更多
Time-resolved radial uniformity of pulse-modulated inductively coupled O_(2)/Ar plasma has been investigated by means of a Langmuir probe as well as an optical probe in this paper. The radial uniformity of plasma has ...Time-resolved radial uniformity of pulse-modulated inductively coupled O_(2)/Ar plasma has been investigated by means of a Langmuir probe as well as an optical probe in this paper. The radial uniformity of plasma has been discussed through analyzing the nonuniformity factor β(calculated by the measured n_e, lower β means higher plasma radial uniformity). The results show that during the active-glow period, the radial distribution of ne exhibits an almost flat profile at the beginning phase, but it converts into a parabola-like profile during the steady state. The consequent evolution for β is that when the power is turned on, it declines to a minimum at first, and then it increases to a maximum, after that, it decays until it keeps constant. This phenomenon can be explained by the fact that the ionization gradually becomes stronger at the plasma center and meanwhile the rebuilt electric field(plasma potential and ambipolar potential) will confine the electrons at the plasma center as well. Besides, the mean electron energy( <ε>_(on)) at the pulse beginning decreases with the increasing duty cycle. This will postpone the plasma ignition after the power is turned on. This phenomenon has been verified by the emission intensity of Ar(λ = 750.4 nm). During the after-glow period, it is interesting to find that the electrons have a large depletion rate at the plasma center. Consequently, ne forms a hollow distribution in the radial direction at the late stage of after-glow. Therefore, β exhibits a maximum at the same time. This can be attributed to the formation of negative oxygen ion(O^(-)) at the plasma center when the power has been turned off.展开更多
Using a one-dimensional fluid model, the pulse-modulated radio-frequency dielectric barrier discharge in atmospheric helium is described. The influences of the pulse duty cycle on the discharge characteristics are stu...Using a one-dimensional fluid model, the pulse-modulated radio-frequency dielectric barrier discharge in atmospheric helium is described. The influences of the pulse duty cycle on the discharge characteristics are studied. The numerical results show that the dependence of discharge characteristics on the duty cycle is sensitive in the region of around 40% duty cycle under the given simulation parameters. In the case of a larger duty cycle, the plasma density is higher, the discharge becomes more intense, but the power consumption is higher. When the duty cycle is lower, one can get a weaker discharge, lower plasma density and higher electron temperature in the bulk plasma. In practical applications, in order to get a higher plasma density and a lower power consumption, it is more important to choose a suitable duty cycle to modulate the RF power supply.展开更多
基金Project supported by the National Natural Science Foundation of China(Granted Nos.11405022 and 11475040)Dalian High Level Talent Innovation Support Plan,China(Grant No.2015R050)
文摘The gas heating mechanism in the pulse-modulated radio-frequency （rf） discharge at atmospheric pressure was inves- tigated with a one-dimensional two-temperature fluid model. Firstly, the spatiotemporal profiles of the gas temperature （Tg） in both consistent rf discharge and pulse-modulated rf discharge were compared. The results indicated that Tg decreases considerably with the pulse-modulated power, and the elastic collision mechanism plays a more important role in the gas heating change. Secondly, the influences of the duty cycle on the discharge parameters, especially on the Tg, were studied. It was found that Tg decreases almost linearly with the reduction of the duty cycle, and there exists one ideal value of the duty cycle, by which both the Tg can be adjusted and the glow mode can be sustained. Thirdly, the discharge mode changing from αto γ mode in the pulse-modulated rf discharge was investigated, the spatial distributions of Tg in the two modes show different features and the ion Joule heating is more important during the mode transition.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11805150, 11875100, 11705141, and 11775282)the Dean Fund of the School of Optoelectronic Engineering (Grant No. 2019GDYT04)+1 种基金the Fund from the Xi'an Key Laboratory of Intelligent Detection and Perception (Grant No. 201805061ZD12CG45)the Key Industry Innovation Chain Project of Shaanxi Provincial Science and the Technology Department,China (Grant No. 2018ZDCXL-GY-08-02-01)。
文摘Time-resolved radial uniformity of pulse-modulated inductively coupled O_(2)/Ar plasma has been investigated by means of a Langmuir probe as well as an optical probe in this paper. The radial uniformity of plasma has been discussed through analyzing the nonuniformity factor β(calculated by the measured n_e, lower β means higher plasma radial uniformity). The results show that during the active-glow period, the radial distribution of ne exhibits an almost flat profile at the beginning phase, but it converts into a parabola-like profile during the steady state. The consequent evolution for β is that when the power is turned on, it declines to a minimum at first, and then it increases to a maximum, after that, it decays until it keeps constant. This phenomenon can be explained by the fact that the ionization gradually becomes stronger at the plasma center and meanwhile the rebuilt electric field(plasma potential and ambipolar potential) will confine the electrons at the plasma center as well. Besides, the mean electron energy( <ε>_(on)) at the pulse beginning decreases with the increasing duty cycle. This will postpone the plasma ignition after the power is turned on. This phenomenon has been verified by the emission intensity of Ar(λ = 750.4 nm). During the after-glow period, it is interesting to find that the electrons have a large depletion rate at the plasma center. Consequently, ne forms a hollow distribution in the radial direction at the late stage of after-glow. Therefore, β exhibits a maximum at the same time. This can be attributed to the formation of negative oxygen ion(O^(-)) at the plasma center when the power has been turned off.
基金supported jointly by National Natural Science Foundation of China （No. 10835004） and National Basic Research Program of China （No. 2010CB832901）
文摘Using a one-dimensional fluid model, the pulse-modulated radio-frequency dielectric barrier discharge in atmospheric helium is described. The influences of the pulse duty cycle on the discharge characteristics are studied. The numerical results show that the dependence of discharge characteristics on the duty cycle is sensitive in the region of around 40% duty cycle under the given simulation parameters. In the case of a larger duty cycle, the plasma density is higher, the discharge becomes more intense, but the power consumption is higher. When the duty cycle is lower, one can get a weaker discharge, lower plasma density and higher electron temperature in the bulk plasma. In practical applications, in order to get a higher plasma density and a lower power consumption, it is more important to choose a suitable duty cycle to modulate the RF power supply.
