Whipped cream is a delicious topping.You can make it at home or buy it in a can.People often put it on desserts such as cakes and pies.Whipped cream is great on ice cream and fruit,too.Do you like cream puffs?Some hav...Whipped cream is a delicious topping.You can make it at home or buy it in a can.People often put it on desserts such as cakes and pies.Whipped cream is great on ice cream and fruit,too.Do you like cream puffs?Some have whipped cream in them.Whipped cream is also good on hot chocolate and coffee.So,enjoy whipped cream on desserts and hot drinks today.It's National Whipped Cream Day!展开更多
This paper describes the experience of Jilin oilfield trials for Microbial Enhanced Oil Recovery (MEOR). A new technique to identify microbes with DNA for MEOR has been established, and useful microbes selected f...This paper describes the experience of Jilin oilfield trials for Microbial Enhanced Oil Recovery (MEOR). A new technique to identify microbes with DNA for MEOR has been established, and useful microbes selected for use in field trials. Behaviors of bacteria activated in the reservoir, oil recovery and water cut, and the viscosity of crude oil produced through huff & puff testing and flooding with molasses-injection tests, have been investigated in situ. CJF-002, which produces biopolysaccharide, is the best among the microbes used for field trials, as it can use molasses as nutrient and produce a small quantity of CO2 and a mass of water-insoluble biopolymer. The metabolic behavior in the reservoir showed that CJF-002 had a good potentiality for MEOR.展开更多
[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosp...[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosphere in urban areas was analyzed and CALPUFF,a revised puff trajectory model,was applied in prediction on atmospheric environmental risks in Xining City.[Result] The simple puff trajectory model can not be applied for long-distance transport or in complex terrain and airflow field.In contrast,CALPUFF would be applied in urban areas,and complex terrain or underlying surface.With high resolution ratio,it would depict the beginning condition and detailed distribution of pollutants transport and diffusion.For prediction on atmospheric environmental risks in Xining City,northwest wind dominated in Huangshui Valley;north wind dominated in Beichuan Valley;temperature inversion occurred at high altitude.These had a significant effect on the downwind direction in Xining urban district.The simulation results indicated that puffs usually spread along Huangshui Valley and some non-steady phenomena occurred,such as blocking effect by mountains,deformation of puff by airflow field in ridges and influence of valley wind.[Conclusion] The research is of significance for precise prediction on characters,influence and extent of atmospheric environmental risks in cities.展开更多
The time evolution of a two-dimensional line thermal-a turbulent flow produced by an initial element with significant buoyancy released in a large water body, is numerically studied with the two-equation k - epsilon m...The time evolution of a two-dimensional line thermal-a turbulent flow produced by an initial element with significant buoyancy released in a large water body, is numerically studied with the two-equation k - epsilon model for turbulence closure. The numerical results show that the thermal is characterized by a vortex pair flow and a kidney shaped concentration structure with double peak maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless time around 10. There are two regions in the flow field of a line thermal: a mixing region where the concentration of tracer fluid is high and the flow is turbulent and rotational with a pair of vortex eyes, and an ambient region where the concentration is zero and the flow is potential and well-described by a model of doublet with strength very close to those given by early experimental and analytical studies. The added virtual mass coefficient of the thermal motion is found to be approximately 1. The aspect ratio for the kidney-shaped sectional thermal is found to be around 1.45 for the self-similar phase. The predicted thermal spreading and mixing rate compares well with experimental data.展开更多
A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined j...A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentration maxima; the aspect ratio is found to be around 1.2. A loss in vertical momentum is ob-served and the added mass coefficient of the jet motion is found to be approximately 1. On the other hand, for weak jets in strong crossflow, i. e. R ≥ 2, the lee of the jet is characterized by a negative pressure region. Although the double vortex flow can stili be noted, the scalar field becomes more symmetrical and no longer bifurcated. The similarity coeffcients are al-so noticeably different. The predicted jet flovv characteristics and mixing rates are well supported by experimental and field dala展开更多
It is essential to learn the temporal and spatial concentration distributions and variations of seeding agents in cloud seeding of precipitation enhancement. A three-dimensional puff trajectory model incorporating a m...It is essential to learn the temporal and spatial concentration distributions and variations of seeding agents in cloud seeding of precipitation enhancement. A three-dimensional puff trajectory model incorporating a mesoscale nonhydrostatic model has been formulated, and is applied to simulating the transporting and diffusive characteristics of multiple line sources of seeding agents within super-cooled stratus. Several important factors are taken into consideration that affect the diffusion of seeding materials such as effects of topography and vertical wind shear, temporal and spatial variation of seeding parameters and wet deposition. The particles of seeding agents are assumed to be almost inert, they have no interaction with the particles of the cloud or precipitation except that they are washed out by precipitation. The model validity is demonstrated by the analyses and comparisons of model results, and checked by the sensitivity experiments of diffusive coefficients and atmospheric stratification. The advantage of this model includes not only its exact reflection of heterogeneity and unsteadiness of background fields, but also its good simulation of transport and diffusion of multiple line sources. The horizontal diffusion rate and the horizontal transport distance have been proposed that they usually were difficult to obtain in other models. In this simulation the horizontal diffusion rate is 0.82 m s(-1) for average of one hour, and the horizontal average transport distance reaches 65 km after 1 4 which are closely related to the background Fields.展开更多
The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between rela...The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between relaxation time(T_(2))and pore size is calibrated.Nuclear magnetic resonance experiments of CO_(2)huff and puff in shale samples are carried out to study the effects of gas injection pressure,soaking time and fractures on the oil production characteristics of shale pores from the micro scale.The recovery degrees of small pores(less than or equal to 50 nm)and large pores(greater than 50 nm)are quantitatively evaluated.The experimental results show that the recovery degree of crude oil in large pores increases rapidly with the increase of injection pressure under immiscible conditions,and the effect of injection pressure rise on recovery degree of large pores decreases under miscible conditions;whether miscible or not,the recovery degree of crude oil in small pores basically maintains a linear increase with the increase of injection pressure,and the lower size limit of pores in which oil can be recovered by CO_(2)decreases with the increase of gas injection pressure;with the increase of soaking time,the recovery degree of crude oil in large pores increases slowly gradually,while the recovery degree of crude oil in small pores increases faster and then decelerates,and the best soaking time in the experiments is about 10 h;the existence of fractures can enhance the recovery degrees of crude oil in small pores and large pores noticeably.展开更多
CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and i...CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and influencing factors of CO_(2)huff and puff and the contribution of sweeping mode to recovery.The experimental results show that the development process of CO_(2)huff and puff can be divided into four stages,namely,CO_(2)backflow,production of gas with some oil,high-speed oil production,and oil production rate decline stages.The production of gas with some oil stage is dominated by free gas displacement,and the high-speed oil production stage is dominated by dissolved gas displacement.CO_(2)injection volume and development speed are the major factors affecting the oil recovery.The larger the injected CO_(2)volume and the lower the development speed,the higher the oil recovery will be.The reasonable CO_(2)injection volume and development speed should be worked out according to oilfield demand and economic evaluation.There is a reasonable soaking time in CO_(2)huff and puff.Longer soaking time than the optimum time makes little contribution to oil recovery.In field applications,the stability of bottom hole pressure is important to judge whether the soaking time is sufficient during the huff period.The oil recovery of CO_(2)huff and puff mainly comes from the contribution of flow sweep and diffusion sweep,and diffusion sweep contributes more to the oil recovery when the soaking time is sufficient.展开更多
Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchang...Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchange processes in subsurface formations,there remains a knowledge gap concerning the disparities in these processes between the matrix and fractures at the pore scale in formations with varying permeability.This study aims to experimentally investigate the CO_(2) diffusion behaviors and in situ oil recovery through a CO_(2) huff‘n’puff process in the Jimsar shale oil reservoir.To achieve this,we designed three matrix-fracture models with different permeabilities(0.074 mD,0.170 mD,and 0.466 mD)and experimented at 30 MPa and 91℃.The oil concentration in both the matrix and fracture was monitored using a low-field nuclear magnetic resonance(LF-NMR)technique to quantify in situ oil recovery and elucidate mass-exchange behaviors.The results showed that after three cycles of CO_(2) huff‘n’puff,the total recovery degree increased from 30.28%to 34.95%as the matrix permeability of the core samples increased from 0.074 to 0.466 mD,indicating a positive correlation between CO_(2) extraction efficiency and matrix permeability.Under similar fracture conditions,the increase in matrix permeability further promoted CO_(2) extraction efficiency during CO_(2) huff‘n’puff.Specifically,the increase in matrix permeability of the core had the greatest effect on the extraction of the first-cycle injection in large pores,which increased from 16.42%to 36.64%.The findings from our research provide valuable insights into the CO_(2) huff‘n’puff effects in different pore sizes following fracturing under varying permeability conditions,shedding light on the mechanisms of CO_(2)-enhanced oil recovery in fractured shale oil reservoirs.展开更多
We have been developing debris-free laser plasma sources for EUV lithography since 1996. Two types of debris-free sources, such as cryogenic target and gas-puff target laser plasma sources, were designed and built up ...We have been developing debris-free laser plasma sources for EUV lithography since 1996. Two types of debris-free sources, such as cryogenic target and gas-puff target laser plasma sources, were designed and built up in CIOMP. EUV radiation spectra of the sources with a variety of targets have been obtained by different ways.展开更多
A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in...A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in the edge and scrape-off layer.Statistical characterizations of GPI line emission intensity are calculated, including the probability density functions(PDFs),skewness, and kurtosis of the intensity, which are found to be consistent with measurements by Langmuir probes.Besides, the track of blob motions is recorded by time sequence of individual frames.The characteristics of the original images and the relatively high-frequency(>10 kHz)/low-frequency(1–10 kHz) component images are illustrated.The observation of the blob’s structures and high-speed motions proves the success and high performance of the GPI diagnostic.展开更多
A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for...A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for solving the K-equation, using the truncated Gram-Charlier expansion (type A) of the concentration field and finite set equations for the corresponding moments. The other model (named ADMM: Analytical Dispersion Multilayers Model) is an semi- analytical solution to the time-dependent two-dimensional advection-diffusion equation based on a discretization of the PBL in N sub-layers;in each sub-layers the advection-diffusion equation is solved by the Laplace transform technique, considering an average value for eddy diffusivity and the wind speed. A preliminary performance evaluation is shown in the case of continuous emission from an elevated source in a variable boundary layer. Both models were able to correctly reproduce the concentration field measured and so to be used as operative air pollution models.展开更多
A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ...A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ADMM (Advection Diffusion Multilayer Method) and GILTT (Generalized Integral Laplace Transform Technique) techniques. Both approaches accept wind and eddy diffusion coefficients with any restriction in their height functions. Comparisons between values predicted by the models against experimental ground-level concentrations (from Copenhagen data set) are shown. The preliminary results confirm the applicability of the approaches proposed and are promising for future work.展开更多
A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI dat...A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.展开更多
The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion...The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion of blobs quantitatively.The radial locations,amplitudes and scale sizes of blobs are obtained based on the fitted ellipse.Furthermore,based on the measurement of blob location,the radial and poloidal velocities of blobs are calculated.With the application of RMP,the edge poloidal shear flow is significantly weakened and the wave number spectrum changes from quasisymmetric to significantly up-down asymmetric.The application of RMP also causes the detected blob location to be much further into the far scrape-off layer(SOL)and increases the blob amplitude.Blob poloidal velocity in the SOL is slowed.Larger-size and longer-lifetime blobs are observed with RMP.With the application of RMP,stronger-amplitude and larger-size blobs are detected in the far SOL and they may cause a more serious erosion problem to the first wall.展开更多
文摘Whipped cream is a delicious topping.You can make it at home or buy it in a can.People often put it on desserts such as cakes and pies.Whipped cream is great on ice cream and fruit,too.Do you like cream puffs?Some have whipped cream in them.Whipped cream is also good on hot chocolate and coffee.So,enjoy whipped cream on desserts and hot drinks today.It's National Whipped Cream Day!
文摘This paper describes the experience of Jilin oilfield trials for Microbial Enhanced Oil Recovery (MEOR). A new technique to identify microbes with DNA for MEOR has been established, and useful microbes selected for use in field trials. Behaviors of bacteria activated in the reservoir, oil recovery and water cut, and the viscosity of crude oil produced through huff & puff testing and flooding with molasses-injection tests, have been investigated in situ. CJF-002, which produces biopolysaccharide, is the best among the microbes used for field trials, as it can use molasses as nutrient and produce a small quantity of CO2 and a mass of water-insoluble biopolymer. The metabolic behavior in the reservoir showed that CJF-002 had a good potentiality for MEOR.
文摘[Objective] The aim was to research application of revised puff trajectory model in atmospheric environmental risks simulation.[Method] In the research,theory of puff trajectory model for pollution diffusion in atmosphere in urban areas was analyzed and CALPUFF,a revised puff trajectory model,was applied in prediction on atmospheric environmental risks in Xining City.[Result] The simple puff trajectory model can not be applied for long-distance transport or in complex terrain and airflow field.In contrast,CALPUFF would be applied in urban areas,and complex terrain or underlying surface.With high resolution ratio,it would depict the beginning condition and detailed distribution of pollutants transport and diffusion.For prediction on atmospheric environmental risks in Xining City,northwest wind dominated in Huangshui Valley;north wind dominated in Beichuan Valley;temperature inversion occurred at high altitude.These had a significant effect on the downwind direction in Xining urban district.The simulation results indicated that puffs usually spread along Huangshui Valley and some non-steady phenomena occurred,such as blocking effect by mountains,deformation of puff by airflow field in ridges and influence of valley wind.[Conclusion] The research is of significance for precise prediction on characters,influence and extent of atmospheric environmental risks in cities.
基金The project was supported by the Hong Kong Research Grants Council and in part by the Trans-Century Foundation for Outstanding Young Teachers sponsored by the National Education Ministry of China and a grant(No.1999043605)from the National 973 Projects o
文摘The time evolution of a two-dimensional line thermal-a turbulent flow produced by an initial element with significant buoyancy released in a large water body, is numerically studied with the two-equation k - epsilon model for turbulence closure. The numerical results show that the thermal is characterized by a vortex pair flow and a kidney shaped concentration structure with double peak maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless time around 10. There are two regions in the flow field of a line thermal: a mixing region where the concentration of tracer fluid is high and the flow is turbulent and rotational with a pair of vortex eyes, and an ambient region where the concentration is zero and the flow is potential and well-described by a model of doublet with strength very close to those given by early experimental and analytical studies. The added virtual mass coefficient of the thermal motion is found to be approximately 1. The aspect ratio for the kidney-shaped sectional thermal is found to be around 1.45 for the self-similar phase. The predicted thermal spreading and mixing rate compares well with experimental data.
文摘A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentration maxima; the aspect ratio is found to be around 1.2. A loss in vertical momentum is ob-served and the added mass coefficient of the jet motion is found to be approximately 1. On the other hand, for weak jets in strong crossflow, i. e. R ≥ 2, the lee of the jet is characterized by a negative pressure region. Although the double vortex flow can stili be noted, the scalar field becomes more symmetrical and no longer bifurcated. The similarity coeffcients are al-so noticeably different. The predicted jet flovv characteristics and mixing rates are well supported by experimental and field dala
文摘It is essential to learn the temporal and spatial concentration distributions and variations of seeding agents in cloud seeding of precipitation enhancement. A three-dimensional puff trajectory model incorporating a mesoscale nonhydrostatic model has been formulated, and is applied to simulating the transporting and diffusive characteristics of multiple line sources of seeding agents within super-cooled stratus. Several important factors are taken into consideration that affect the diffusion of seeding materials such as effects of topography and vertical wind shear, temporal and spatial variation of seeding parameters and wet deposition. The particles of seeding agents are assumed to be almost inert, they have no interaction with the particles of the cloud or precipitation except that they are washed out by precipitation. The model validity is demonstrated by the analyses and comparisons of model results, and checked by the sensitivity experiments of diffusive coefficients and atmospheric stratification. The advantage of this model includes not only its exact reflection of heterogeneity and unsteadiness of background fields, but also its good simulation of transport and diffusion of multiple line sources. The horizontal diffusion rate and the horizontal transport distance have been proposed that they usually were difficult to obtain in other models. In this simulation the horizontal diffusion rate is 0.82 m s(-1) for average of one hour, and the horizontal average transport distance reaches 65 km after 1 4 which are closely related to the background Fields.
基金Supported by the National Natural Science Foundation of China Youth Project(52004221)National Natural Science Foundation of China Project(5207042143)Shaanxi Provincial Department of Education Scientific Research Project(21JY034)。
文摘The parameters such as pore size distribution,specific surface area and pore volume of shale rock samples are analyzed by low-temperature nitrogen adsorption experiment,and then the conversion coefficient between relaxation time(T_(2))and pore size is calibrated.Nuclear magnetic resonance experiments of CO_(2)huff and puff in shale samples are carried out to study the effects of gas injection pressure,soaking time and fractures on the oil production characteristics of shale pores from the micro scale.The recovery degrees of small pores(less than or equal to 50 nm)and large pores(greater than 50 nm)are quantitatively evaluated.The experimental results show that the recovery degree of crude oil in large pores increases rapidly with the increase of injection pressure under immiscible conditions,and the effect of injection pressure rise on recovery degree of large pores decreases under miscible conditions;whether miscible or not,the recovery degree of crude oil in small pores basically maintains a linear increase with the increase of injection pressure,and the lower size limit of pores in which oil can be recovered by CO_(2)decreases with the increase of gas injection pressure;with the increase of soaking time,the recovery degree of crude oil in large pores increases slowly gradually,while the recovery degree of crude oil in small pores increases faster and then decelerates,and the best soaking time in the experiments is about 10 h;the existence of fractures can enhance the recovery degrees of crude oil in small pores and large pores noticeably.
文摘CO_(2)huff and puff experiments of different injection parameters,production parameters and soaking time were carried out on large-scale cubic and long columnar outcrop samples to analyze dynamic characteristics and influencing factors of CO_(2)huff and puff and the contribution of sweeping mode to recovery.The experimental results show that the development process of CO_(2)huff and puff can be divided into four stages,namely,CO_(2)backflow,production of gas with some oil,high-speed oil production,and oil production rate decline stages.The production of gas with some oil stage is dominated by free gas displacement,and the high-speed oil production stage is dominated by dissolved gas displacement.CO_(2)injection volume and development speed are the major factors affecting the oil recovery.The larger the injected CO_(2)volume and the lower the development speed,the higher the oil recovery will be.The reasonable CO_(2)injection volume and development speed should be worked out according to oilfield demand and economic evaluation.There is a reasonable soaking time in CO_(2)huff and puff.Longer soaking time than the optimum time makes little contribution to oil recovery.In field applications,the stability of bottom hole pressure is important to judge whether the soaking time is sufficient during the huff period.The oil recovery of CO_(2)huff and puff mainly comes from the contribution of flow sweep and diffusion sweep,and diffusion sweep contributes more to the oil recovery when the soaking time is sufficient.
基金National Natural Science Foundation of China via grant number 52174035,52304048China Postdoctoral Science Foundation(2022M722637)Research and Innovation Fund for Graduate Students of Southwest Petroleum University(2022KYCX026).
文摘Recent studies have indicated that the injection of carbon dioxide(CO_(2))can lead to increased oil recovery in fractured shale reservoirs following natural depletion.Despite advancements in understanding mass exchange processes in subsurface formations,there remains a knowledge gap concerning the disparities in these processes between the matrix and fractures at the pore scale in formations with varying permeability.This study aims to experimentally investigate the CO_(2) diffusion behaviors and in situ oil recovery through a CO_(2) huff‘n’puff process in the Jimsar shale oil reservoir.To achieve this,we designed three matrix-fracture models with different permeabilities(0.074 mD,0.170 mD,and 0.466 mD)and experimented at 30 MPa and 91℃.The oil concentration in both the matrix and fracture was monitored using a low-field nuclear magnetic resonance(LF-NMR)technique to quantify in situ oil recovery and elucidate mass-exchange behaviors.The results showed that after three cycles of CO_(2) huff‘n’puff,the total recovery degree increased from 30.28%to 34.95%as the matrix permeability of the core samples increased from 0.074 to 0.466 mD,indicating a positive correlation between CO_(2) extraction efficiency and matrix permeability.Under similar fracture conditions,the increase in matrix permeability further promoted CO_(2) extraction efficiency during CO_(2) huff‘n’puff.Specifically,the increase in matrix permeability of the core had the greatest effect on the extraction of the first-cycle injection in large pores,which increased from 16.42%to 36.64%.The findings from our research provide valuable insights into the CO_(2) huff‘n’puff effects in different pore sizes following fracturing under varying permeability conditions,shedding light on the mechanisms of CO_(2)-enhanced oil recovery in fractured shale oil reservoirs.
文摘We have been developing debris-free laser plasma sources for EUV lithography since 1996. Two types of debris-free sources, such as cryogenic target and gas-puff target laser plasma sources, were designed and built up in CIOMP. EUV radiation spectra of the sources with a variety of targets have been obtained by different ways.
基金supported by the National Key Research and Development Program of China (No.2017YFE0300405)National Natural Science Foundation of China (Nos.11575055, 11705052, 11875124, 11475058, and 11475056)+1 种基金the National Key Research and Development Program of China (Nos.2017YFE0301201, 2018YFE0303102, 2018YFE0309103)the Chinese National Fusion Project for ITER (No.2015GB104000)
文摘A gas puff imaging(GPI) diagnostic has been developed and applied to measure edge plasma turbulence on the HL-2A tokamak.The principle and experimental setup of GPI are described.GPI is applied to investigate blobs in the edge and scrape-off layer.Statistical characterizations of GPI line emission intensity are calculated, including the probability density functions(PDFs),skewness, and kurtosis of the intensity, which are found to be consistent with measurements by Langmuir probes.Besides, the track of blob motions is recorded by time sequence of individual frames.The characteristics of the original images and the relatively high-frequency(>10 kHz)/low-frequency(1–10 kHz) component images are illustrated.The observation of the blob’s structures and high-speed motions proves the success and high performance of the GPI diagnostic.
文摘A comparison between a non-Gaussian puff model and an advanced time-dependent model to simulate the pollutant dispersion in the Planetary Boundary Layer is presented. The puff model is based on a general technique for solving the K-equation, using the truncated Gram-Charlier expansion (type A) of the concentration field and finite set equations for the corresponding moments. The other model (named ADMM: Analytical Dispersion Multilayers Model) is an semi- analytical solution to the time-dependent two-dimensional advection-diffusion equation based on a discretization of the PBL in N sub-layers;in each sub-layers the advection-diffusion equation is solved by the Laplace transform technique, considering an average value for eddy diffusivity and the wind speed. A preliminary performance evaluation is shown in the case of continuous emission from an elevated source in a variable boundary layer. Both models were able to correctly reproduce the concentration field measured and so to be used as operative air pollution models.
文摘A puff model for the dispersion of material from fugitive hazardous emissions is presented. For vertical diffusion the model is based on general techniques for solving time dependent advection-diffusion equation: the ADMM (Advection Diffusion Multilayer Method) and GILTT (Generalized Integral Laplace Transform Technique) techniques. Both approaches accept wind and eddy diffusion coefficients with any restriction in their height functions. Comparisons between values predicted by the models against experimental ground-level concentrations (from Copenhagen data set) are shown. The preliminary results confirm the applicability of the approaches proposed and are promising for future work.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China(Nos.2022YFE03030001,2022YFE03020004 and 2022YFE 03050003)National Natural Science Foundation of China(Nos.12275310,11975275,12175277 and 11975271)+2 种基金the Science Foundation of Institute of Plasma Physics,Chinese Academy of Sciences(No.DSJJ-2021-01)the Collaborative Innovation Program of Hefei Science Center,Chinese Academy of Sciences(No.2021HSC-CIP019)the Users with Excellence Program of Hefei Science Center,Chinese Academy of Sciences(Nos.2021HSC-UE014 and 2021HSCUE012)。
文摘A gas puff imaging(GPI)diagnostic has been developed and operated on EAST since 2012,and the time-delay estimation(TDE)method is used to derive the propagation velocity of fluctuations from the two-dimensional GPI data.However,with the TDE method it is difficult to analyze the data with fast transient events,such as edge-localized mode(ELM).Consequently,a method called the spatial displacement estimation(SDE)algorithm is developed to estimate the turbulence velocity with high temporal resolution.Based on the SDE algorithm,we make some improvements,including an adaptive median filter and super-resolution technology.After the development of the algorithm,a straight-line movement and a curved-line movement are used to test the accuracy of the algorithm,and the calculated speed agrees well with preset speed.This SDE algorithm is applied to the EAST GPI data analysis,and the derived propagation velocity of turbulence is consistent with that from the TDE method,but with much higher temporal resolution.
基金supported by the National Key Research and Development Program of China(Nos.2022YFE03100002,2022YFE03010004 and 2019YFE03060002)National Natural Science Foundation of China(Nos.U1867222,U1967206 and 51821005)the Sichuan Natural Science Foundation(Nos.2022NSFSC1791 and 2020JDTD0030).
文摘The impact of resonant magnetic perturbation(RMP)on blob motion and structure in the SOL of the HL-2A tokamak is studied using a gas puff imaging diagnostic.Ellipse fitting is applied to study the structure and motion of blobs quantitatively.The radial locations,amplitudes and scale sizes of blobs are obtained based on the fitted ellipse.Furthermore,based on the measurement of blob location,the radial and poloidal velocities of blobs are calculated.With the application of RMP,the edge poloidal shear flow is significantly weakened and the wave number spectrum changes from quasisymmetric to significantly up-down asymmetric.The application of RMP also causes the detected blob location to be much further into the far scrape-off layer(SOL)and increases the blob amplitude.Blob poloidal velocity in the SOL is slowed.Larger-size and longer-lifetime blobs are observed with RMP.With the application of RMP,stronger-amplitude and larger-size blobs are detected in the far SOL and they may cause a more serious erosion problem to the first wall.
