A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact f...A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.展开更多
The Internet of Things (IoT) is a large-scale network of devices capable of sensing, data processing, and communicating with each other through different communication protocols. In today's technology ecosystem, I...The Internet of Things (IoT) is a large-scale network of devices capable of sensing, data processing, and communicating with each other through different communication protocols. In today's technology ecosystem, IoT interacts with many application areas such as smart city, smart building, security, traffic, remote monitoring, health, energy, disaster, agriculture, industry. The IoT network in these scenarios comprises tiny devices, gateways, and cloud platforms. An IoT network is able to keep these fundamental components in transmission under many conditions with lightweight communication protocols taking into account the limited hardware features (memory, processor, energy, etc.) of tiny devices. These lightweight communication protocols affect the network traffic, reliability, bandwidth, and energy consumption of the IoT application. Therefore, determining the most proper communication protocol for application developers emerges as an important engineering problem. This paper presents a straightforward overview of the lightweight communication protocols, technological advancements in application layer for the IoT ecosystem. The survey then analyzes various recent lightweight communication protocols and reviews their strengths and limitations. In addition, the paper explains the experimental comparison of Constrained Applications Protocol (CoAP), Message Queuing Telemetry (MQTT), and WebSocket protocols, more convenient for tiny IoT devices. Finally, we discuss future research directions of communication protocols for IoT.展开更多
For the high end-to-end channel capacity, the amplify-and-forward scheme multiple-hop MIMO relays system is considered. The distance between each transceiver is optimized to prevent some relays from being the bottlene...For the high end-to-end channel capacity, the amplify-and-forward scheme multiple-hop MIMO relays system is considered. The distance between each transceiver is optimized to prevent some relays from being the bottleneck and guarantee the high end-to-end channel capacity. However, in some cases, the location of relays can’t be set at the desired location, the transmit power of each relay should be optimized. Additionally, in order to achieve the higher end-to-end channel capacity, the distance and the transmit power are optimized simultaneously. We propose the Markov Chain Monte Carlo method to optimize both the distance and the transmit power in complex propagation environments. Moreover, when the system has no control over transmission of each relay, the interference signal is presented and the performance of system is deteriorated. The general protocol of control transmission for each relay on the MAC layer is analyzed and compared to the Carrier Sense Multiple Access-Collision Avoidance protocol. According to the number of relays, the Mac layer protocol for the highest end-to-end channel capacity is changed. We also analyze the end-to-end channel capacity when the number of antennas and relays tends to infinity.展开更多
Data replication is a key way to design a disaster tolerance system. This paper presents a replication driver layer-based data replication system on FreeBSD （FRS）. The system is embedded into the replication device ...Data replication is a key way to design a disaster tolerance system. This paper presents a replication driver layer-based data replication system on FreeBSD （FRS）. The system is embedded into the replication device driver layer, does not depend on specific storage devices and logical volume manager, and can achieve replication on data block level. The design considerations and decisions in defining FRS are described in detail.展开更多
The attribute access methods of MAC layer in wireless communication network is researched. Aiming at conquering the problem of the shared ZigBee wireless channel resulting multi-channel device conflicts when using the...The attribute access methods of MAC layer in wireless communication network is researched. Aiming at conquering the problem of the shared ZigBee wireless channel resulting multi-channel device conflicts when using the data channel at the same time, therefore the protocol is improved and a method used to access the properties of ZigBee is proposed, and this method can be achieved to manage effectively for all the 29 properties MAC layer, save storage space and realize property maintenance and expansion.展开更多
It is an effective method to broadcast the augmentation information of satellite navigation system using GEO technology.However,it becomes difficult to receive GEO signal in some special situation,for example in citie...It is an effective method to broadcast the augmentation information of satellite navigation system using GEO technology.However,it becomes difficult to receive GEO signal in some special situation,for example in cities or canyons,in which the signal will be sheltered by big buildings or mountains.In order to solve this problem,an Internet-based broadcast network has been proposed to utilize the infrastructure of the Internet to broadcast the augmentation information of satellite navigation system,which is based on application-layer multicast protocols.In this paper,a topology and position aware overlay network construction protocol is proposed to build the network for augmentation information of satellite navigation system.Simulation results show that the new algorithm is able to achieve better performance in terms of delay,depth and degree utilization.展开更多
The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected an...The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected anywhere and at any time. The concept can be applied to sectors such as e-health, e-government, automotive, geographic information systems, remote sensing, home networking, e-commerce and climate change mitigation. Unlike the Internet, the IoT has its own constraints, notably those linked to heterogeneity. This divergence is linked to different protocols, technologies and algorithms implemented in these connected objects for their interconnection. It should be noted that IoT devices can communicate with each other using different protocols and dedicated M2M (Machine to Machine) communication technologies. The aim of this work is to find solutions for optimising energy consumption during data exchanges between connected objects, with respect to certain constraints by using firstly this exchange for only Message Queuing Telemetry Transport (MQTT) and secondly the combination of the MQTT protocol and the Constrained Application Protocol (CoAP) protocol to check the quantity of the energy optimized. The MQTT protocol, for example, is one of the most widely used protocols for connected objects. Admittedly, this protocol consumes less energy, but in the situation of a very large number of users, the problem of saturation inevitably arises. In this article, we propose a solution of optimising energy consumption by combining the MQTT protocol with the CoAP protocol which can allow to use the standby mode contrary to the use of MQTT where the broker is always being turning. This solution has not yet been implemented but is being discussed. In this article, we’re going to use the joulemeter which is an application developed by Microsoft to measure and estimate the energy consumption of computers and applications. In our case, we take the example of the “Service Broker for network connections” of the Windows’s 10 Operating System, in my own computer to show the difference between the consumption of energy without the standby mode and with standby mode, because with the MQTT, the Broker’s MQTT is always on. Now, with the combination MQTT and CoAP, it is possible that we have standby mode and to compare these two cases in term of consumption of an energy. And to do it, we must use the joulemeter that we installed in our computer to simulate it. This is achieved by using the CoAP protocol combined with the MQTT protocol. The aim of our work is to reduce energy consumption in order to solve the problem of saturation of the MQTT by linking it to CoAP protocol by using Joulemeter mentioned above.展开更多
The depletion of the ozone layer, a vital shield protecting the Earth from harmful ultraviolet (UV) radiation, is now a worldwide environmental concern. Human activities, particularly the release of ozone depleting su...The depletion of the ozone layer, a vital shield protecting the Earth from harmful ultraviolet (UV) radiation, is now a worldwide environmental concern. Human activities, particularly the release of ozone depleting substances (ODS), have led to the thinning of this protective layer over recent decades. Simultaneously, illegal trade has emerged as a global challenge, giving rise to economic issues, losses of tax revenue, heightened criminal activities, health risks, and environmental hazards. The depletion of the ozone layer, a critical shield protecting the Earth from harmful ultraviolet (UV) radiation, has become a global environmental concern. This paper delves into the legal dimensions surrounding ozone-depleting substances (ODS), their impact on the ozone layer, and the subsequent risk of skin cancer. As countries navigate international agreements, domestic regulations, and enforcement mechanisms, the intricate interplay between legal frameworks and the health implications of ozone layer depletion comes to the forefront. The paper highlights particular instances of illegal trade in ozone depleting substances, drawing from data reported by the parties to the Montreal Protocol. Notably, China stands out as a significant source of contraband ODS, with other countries such as Bulgaria, Lithuania, Poland, and France reporting numerous cases. Analyzing these case instances offers insights into the efficacy of legal frameworks and enforcement measures. The paper offers a comprehensive set of recommendations to strengthen global control and enforcement against the illegal trade of ozone depleting substances. These recommendations span diverse aspects such as production monitoring, customs collaboration, mutual verification, cross-border agreements, public-private partnerships, international cooperation, detection equipment, global regulatory standards, resource allocation, public awareness campaigns, alternative substance development, and controlling the trade at its source. By applying these recommendations and enhancing enforcement measures, we aim to protect the ozone layer and create a healthier and safer world for future generations and achieve sustainable development goals.展开更多
This research paper describes the design and implementation of the Consultative Committee for Space Data Systems (CCSDS) standards REF _Ref401069962 \r \h \* MERGEFORMAT [1] for Space Data Link Layer Protocol (SDLP). ...This research paper describes the design and implementation of the Consultative Committee for Space Data Systems (CCSDS) standards REF _Ref401069962 \r \h \* MERGEFORMAT [1] for Space Data Link Layer Protocol (SDLP). The primer focus is the telecommand (TC) part of the standard. The implementation of the standard was in the form of DLL functions using C++ programming language. The second objective of this paper was to use the DLL functions with OMNeT++ simulating environment to create a simulator in order to analyze the mean end-to-end Packet Delay, maximum achievable application layer throughput for a given fixed link capacity and normalized protocol overhead, defined as the total number of bytes transmitted on the link in a given period of time (e.g. per second) divided by the number of bytes of application data received at the application layer model data sink. In addition, the DLL was also integrated with Ground Support Equipment Operating System (GSEOS), a software system for space instruments and small spacecrafts especially suited for low budget missions. The SDLP is designed for rapid test system design and high flexibility for changing telemetry and command requirements. GSEOS can be seamlessly moved from EM/FM development (bench testing) to flight operations. It features the Python programming language as a configuration/scripting tool and can easily be extended to accommodate custom hardware interfaces. This paper also shows the results of the simulations and its analysis.展开更多
Advance development of wireless technologies and micro-sensor systems have enabled Wireless Sensor Network (WSN) to emerge as a leading solution in many crucial sensor-based applications. WSN deploys numerous resource...Advance development of wireless technologies and micro-sensor systems have enabled Wireless Sensor Network (WSN) to emerge as a leading solution in many crucial sensor-based applications. WSN deploys numerous resource-constrained sensor nodes which have limited power supply, memory and computation capability in a harsh environment. Inefficient routing strategy results in degraded network performance in terms of reliability, latency and energy efficiency. In this paper, a cross-layer design, Contention-based MAC and Routing protocol is proposed, termed Contention/SNIR-Based Forwarding (CSBF) protocol. CSBF utilizes the geographical information of sensor nodes to effectively guide the routing direction towards destination node, thereby enhancing reliability. Furthermore, Signal-to-Noise-plus-Interference Ratio (SNIR) metric is used as a routing parameter to guarantee high quality link for data transmission. A Contention-Winner Relay scheme is utilized to reduce the delays caused by the contention procedure. Energy efficiency is also improved by introducing sleep mode technique in CSBF. The simulation work is carried out via OMNeT++ network simulator. The performance of CSBF is compared with other existing routing protocols such as AODV and DSDV in terms of packet delivery ratio (PDR), average end-to-end (ETE) delay and energy consumption per packet. Simulation results highlight that CSBF outperforms AODV and DSDV protocols in respect of PDR and energy efficiency. CSBF also has the most consistent overall network performance.展开更多
In data centers, the transmission control protocol(TCP) incast causes catastrophic goodput degradation to applications with a many-to-one traffic pattern. In this paper, we intend to tame incast at the receiver-side a...In data centers, the transmission control protocol(TCP) incast causes catastrophic goodput degradation to applications with a many-to-one traffic pattern. In this paper, we intend to tame incast at the receiver-side application. Towards this goal, we first develop an analytical model that formulates the incast probability as a function of connection variables and network environment settings. We combine the model with the optimization theory and derive some insights into minimizing the incast probability through tuning connection variables related to applications. Then,enlightened by the analytical results, we propose an adaptive application-layer solution to the TCP incast.The solution equally allocates advertised windows to concurrent connections, and dynamically adapts the number of concurrent connections to the varying conditions. Simulation results show that our solution consistently eludes incast and achieves high goodput in various scenarios including the ones with multiple bottleneck links and background TCP traffic.展开更多
Several protocols and schemes have been proposed to reduce energy consumption in Wireless Sensor Net-works (WSNs). In this paper we employ farcoopt, a cross layer design approach with the concept of coop-eration among...Several protocols and schemes have been proposed to reduce energy consumption in Wireless Sensor Net-works (WSNs). In this paper we employ farcoopt, a cross layer design approach with the concept of coop-eration among the nodes with best farthest neighbor scheme to increase the Quality of Service (QoS), reduce energy consumption, increases performance and end-to-end throughput. We present cooperative transmission to connect previously disconnect parts of a network thus overcoming the separation problem of multi-hop network. We show that this approach improves connectivity over 50% compared to multi-hop approaches and reduces the number of nodes necessary to provide full coverage of an area up to 35%. Simulation results show that on increase of data rates i.e. packet the network life time increases in farcoopt as compared to tra-ditional multi hop approach. The result of this analysis is presented in this work.展开更多
基金supported by the Fundamental Research Funds for the Central Universities under Grant No.ZYGX2009j006Foundation of Science & Technology Department of Sichuan Province under Grant No.2011GZ0192
文摘A proactive routing protocol CL-OLSR （cross-layer based optimized link state routing） by using a brand-new routing metric CLM （cross-layer metric） is proposed. CL-OLSR takes into account four link quality impact factors in route calculation through the cross-layer operation mechanism： the node available bandwidth, the node load, the link delivery rate, and the link interference, and thus the effect of route selection is optimized greatly. The simulation results show that the proposed CL-OLSR protocol can not only improve the network throughput to a large extent, but also reduce the end-to-end delay, while achieving load balance route results.
文摘The Internet of Things (IoT) is a large-scale network of devices capable of sensing, data processing, and communicating with each other through different communication protocols. In today's technology ecosystem, IoT interacts with many application areas such as smart city, smart building, security, traffic, remote monitoring, health, energy, disaster, agriculture, industry. The IoT network in these scenarios comprises tiny devices, gateways, and cloud platforms. An IoT network is able to keep these fundamental components in transmission under many conditions with lightweight communication protocols taking into account the limited hardware features (memory, processor, energy, etc.) of tiny devices. These lightweight communication protocols affect the network traffic, reliability, bandwidth, and energy consumption of the IoT application. Therefore, determining the most proper communication protocol for application developers emerges as an important engineering problem. This paper presents a straightforward overview of the lightweight communication protocols, technological advancements in application layer for the IoT ecosystem. The survey then analyzes various recent lightweight communication protocols and reviews their strengths and limitations. In addition, the paper explains the experimental comparison of Constrained Applications Protocol (CoAP), Message Queuing Telemetry (MQTT), and WebSocket protocols, more convenient for tiny IoT devices. Finally, we discuss future research directions of communication protocols for IoT.
文摘For the high end-to-end channel capacity, the amplify-and-forward scheme multiple-hop MIMO relays system is considered. The distance between each transceiver is optimized to prevent some relays from being the bottleneck and guarantee the high end-to-end channel capacity. However, in some cases, the location of relays can’t be set at the desired location, the transmit power of each relay should be optimized. Additionally, in order to achieve the higher end-to-end channel capacity, the distance and the transmit power are optimized simultaneously. We propose the Markov Chain Monte Carlo method to optimize both the distance and the transmit power in complex propagation environments. Moreover, when the system has no control over transmission of each relay, the interference signal is presented and the performance of system is deteriorated. The general protocol of control transmission for each relay on the MAC layer is analyzed and compared to the Carrier Sense Multiple Access-Collision Avoidance protocol. According to the number of relays, the Mac layer protocol for the highest end-to-end channel capacity is changed. We also analyze the end-to-end channel capacity when the number of antennas and relays tends to infinity.
基金supported by 863 Program under Grant No. 2009AA01A404
文摘Data replication is a key way to design a disaster tolerance system. This paper presents a replication driver layer-based data replication system on FreeBSD （FRS）. The system is embedded into the replication device driver layer, does not depend on specific storage devices and logical volume manager, and can achieve replication on data block level. The design considerations and decisions in defining FRS are described in detail.
文摘The attribute access methods of MAC layer in wireless communication network is researched. Aiming at conquering the problem of the shared ZigBee wireless channel resulting multi-channel device conflicts when using the data channel at the same time, therefore the protocol is improved and a method used to access the properties of ZigBee is proposed, and this method can be achieved to manage effectively for all the 29 properties MAC layer, save storage space and realize property maintenance and expansion.
基金supported by National High Technical Research and Development Program of China (863 Program) under Grant No. 2009AA12Z322
文摘It is an effective method to broadcast the augmentation information of satellite navigation system using GEO technology.However,it becomes difficult to receive GEO signal in some special situation,for example in cities or canyons,in which the signal will be sheltered by big buildings or mountains.In order to solve this problem,an Internet-based broadcast network has been proposed to utilize the infrastructure of the Internet to broadcast the augmentation information of satellite navigation system,which is based on application-layer multicast protocols.In this paper,a topology and position aware overlay network construction protocol is proposed to build the network for augmentation information of satellite navigation system.Simulation results show that the new algorithm is able to achieve better performance in terms of delay,depth and degree utilization.
文摘The “Internet of Things” (IoT) refers to a set of intelligent “objects” that can communicate with each other directly or through a network. The IoT is the embodiment of the idea that everything can be connected anywhere and at any time. The concept can be applied to sectors such as e-health, e-government, automotive, geographic information systems, remote sensing, home networking, e-commerce and climate change mitigation. Unlike the Internet, the IoT has its own constraints, notably those linked to heterogeneity. This divergence is linked to different protocols, technologies and algorithms implemented in these connected objects for their interconnection. It should be noted that IoT devices can communicate with each other using different protocols and dedicated M2M (Machine to Machine) communication technologies. The aim of this work is to find solutions for optimising energy consumption during data exchanges between connected objects, with respect to certain constraints by using firstly this exchange for only Message Queuing Telemetry Transport (MQTT) and secondly the combination of the MQTT protocol and the Constrained Application Protocol (CoAP) protocol to check the quantity of the energy optimized. The MQTT protocol, for example, is one of the most widely used protocols for connected objects. Admittedly, this protocol consumes less energy, but in the situation of a very large number of users, the problem of saturation inevitably arises. In this article, we propose a solution of optimising energy consumption by combining the MQTT protocol with the CoAP protocol which can allow to use the standby mode contrary to the use of MQTT where the broker is always being turning. This solution has not yet been implemented but is being discussed. In this article, we’re going to use the joulemeter which is an application developed by Microsoft to measure and estimate the energy consumption of computers and applications. In our case, we take the example of the “Service Broker for network connections” of the Windows’s 10 Operating System, in my own computer to show the difference between the consumption of energy without the standby mode and with standby mode, because with the MQTT, the Broker’s MQTT is always on. Now, with the combination MQTT and CoAP, it is possible that we have standby mode and to compare these two cases in term of consumption of an energy. And to do it, we must use the joulemeter that we installed in our computer to simulate it. This is achieved by using the CoAP protocol combined with the MQTT protocol. The aim of our work is to reduce energy consumption in order to solve the problem of saturation of the MQTT by linking it to CoAP protocol by using Joulemeter mentioned above.
文摘The depletion of the ozone layer, a vital shield protecting the Earth from harmful ultraviolet (UV) radiation, is now a worldwide environmental concern. Human activities, particularly the release of ozone depleting substances (ODS), have led to the thinning of this protective layer over recent decades. Simultaneously, illegal trade has emerged as a global challenge, giving rise to economic issues, losses of tax revenue, heightened criminal activities, health risks, and environmental hazards. The depletion of the ozone layer, a critical shield protecting the Earth from harmful ultraviolet (UV) radiation, has become a global environmental concern. This paper delves into the legal dimensions surrounding ozone-depleting substances (ODS), their impact on the ozone layer, and the subsequent risk of skin cancer. As countries navigate international agreements, domestic regulations, and enforcement mechanisms, the intricate interplay between legal frameworks and the health implications of ozone layer depletion comes to the forefront. The paper highlights particular instances of illegal trade in ozone depleting substances, drawing from data reported by the parties to the Montreal Protocol. Notably, China stands out as a significant source of contraband ODS, with other countries such as Bulgaria, Lithuania, Poland, and France reporting numerous cases. Analyzing these case instances offers insights into the efficacy of legal frameworks and enforcement measures. The paper offers a comprehensive set of recommendations to strengthen global control and enforcement against the illegal trade of ozone depleting substances. These recommendations span diverse aspects such as production monitoring, customs collaboration, mutual verification, cross-border agreements, public-private partnerships, international cooperation, detection equipment, global regulatory standards, resource allocation, public awareness campaigns, alternative substance development, and controlling the trade at its source. By applying these recommendations and enhancing enforcement measures, we aim to protect the ozone layer and create a healthier and safer world for future generations and achieve sustainable development goals.
文摘This research paper describes the design and implementation of the Consultative Committee for Space Data Systems (CCSDS) standards REF _Ref401069962 \r \h \* MERGEFORMAT [1] for Space Data Link Layer Protocol (SDLP). The primer focus is the telecommand (TC) part of the standard. The implementation of the standard was in the form of DLL functions using C++ programming language. The second objective of this paper was to use the DLL functions with OMNeT++ simulating environment to create a simulator in order to analyze the mean end-to-end Packet Delay, maximum achievable application layer throughput for a given fixed link capacity and normalized protocol overhead, defined as the total number of bytes transmitted on the link in a given period of time (e.g. per second) divided by the number of bytes of application data received at the application layer model data sink. In addition, the DLL was also integrated with Ground Support Equipment Operating System (GSEOS), a software system for space instruments and small spacecrafts especially suited for low budget missions. The SDLP is designed for rapid test system design and high flexibility for changing telemetry and command requirements. GSEOS can be seamlessly moved from EM/FM development (bench testing) to flight operations. It features the Python programming language as a configuration/scripting tool and can easily be extended to accommodate custom hardware interfaces. This paper also shows the results of the simulations and its analysis.
文摘Advance development of wireless technologies and micro-sensor systems have enabled Wireless Sensor Network (WSN) to emerge as a leading solution in many crucial sensor-based applications. WSN deploys numerous resource-constrained sensor nodes which have limited power supply, memory and computation capability in a harsh environment. Inefficient routing strategy results in degraded network performance in terms of reliability, latency and energy efficiency. In this paper, a cross-layer design, Contention-based MAC and Routing protocol is proposed, termed Contention/SNIR-Based Forwarding (CSBF) protocol. CSBF utilizes the geographical information of sensor nodes to effectively guide the routing direction towards destination node, thereby enhancing reliability. Furthermore, Signal-to-Noise-plus-Interference Ratio (SNIR) metric is used as a routing parameter to guarantee high quality link for data transmission. A Contention-Winner Relay scheme is utilized to reduce the delays caused by the contention procedure. Energy efficiency is also improved by introducing sleep mode technique in CSBF. The simulation work is carried out via OMNeT++ network simulator. The performance of CSBF is compared with other existing routing protocols such as AODV and DSDV in terms of packet delivery ratio (PDR), average end-to-end (ETE) delay and energy consumption per packet. Simulation results highlight that CSBF outperforms AODV and DSDV protocols in respect of PDR and energy efficiency. CSBF also has the most consistent overall network performance.
基金supported by the Fundamental Research Fundsfor the Central Universities under Grant No.ZYGX2015J009the Sichuan Province Scientific and Technological Support Project under Grants No.2014GZ0017 and No.2016GZ0093
文摘In data centers, the transmission control protocol(TCP) incast causes catastrophic goodput degradation to applications with a many-to-one traffic pattern. In this paper, we intend to tame incast at the receiver-side application. Towards this goal, we first develop an analytical model that formulates the incast probability as a function of connection variables and network environment settings. We combine the model with the optimization theory and derive some insights into minimizing the incast probability through tuning connection variables related to applications. Then,enlightened by the analytical results, we propose an adaptive application-layer solution to the TCP incast.The solution equally allocates advertised windows to concurrent connections, and dynamically adapts the number of concurrent connections to the varying conditions. Simulation results show that our solution consistently eludes incast and achieves high goodput in various scenarios including the ones with multiple bottleneck links and background TCP traffic.
文摘Several protocols and schemes have been proposed to reduce energy consumption in Wireless Sensor Net-works (WSNs). In this paper we employ farcoopt, a cross layer design approach with the concept of coop-eration among the nodes with best farthest neighbor scheme to increase the Quality of Service (QoS), reduce energy consumption, increases performance and end-to-end throughput. We present cooperative transmission to connect previously disconnect parts of a network thus overcoming the separation problem of multi-hop network. We show that this approach improves connectivity over 50% compared to multi-hop approaches and reduces the number of nodes necessary to provide full coverage of an area up to 35%. Simulation results show that on increase of data rates i.e. packet the network life time increases in farcoopt as compared to tra-ditional multi hop approach. The result of this analysis is presented in this work.
