CeO_(2)is increasingly recognized as a viable polishing abrasive for SiO_(2)-based substrates,such as K9 glass,leveraging its intrinsic chemical mechanical polishing property.Although LaOF can improve the performance ...CeO_(2)is increasingly recognized as a viable polishing abrasive for SiO_(2)-based substrates,such as K9 glass,leveraging its intrinsic chemical mechanical polishing property.Although LaOF can improve the performance of CeO_(2)abrasive,the specific mechanism underlying this enhancement remains elusive.Herein,LaOF-CeO_(2)composite abrasive was prepared by co-precipitation method,aiming to elaborate on the influence of LaOF on the abrasive's polishing efficiency.It is found that the integration of LaOF results in the formation of LaOF-CeO_(2)composite characterized by a remarkably reduced primary particle size of approximately 41 nm,which primarily accounts for the improvement in polishing performance.Furthermore,the increasement in Ce^(3+)content and the Zeta potential both contribute to the superior function of the composite abrasive.Notably,the synergistic effect of these parameters is manifested in an elevated material removal rate reaching 1091.197 nm/min,coupled with a minimized surface roughness of as low as 0.546 nm when applied to K9 glass surface.The findings of this work offer novel insights into the role of LaOF in facilitating the performance of Ce-based abrasives,potentially influencing future advancements in the field of precision surface processing.展开更多
The slow conversion of polyphase in lithium-sulfur(Li-S)batteries not only intensifies the shuttle effect of lithium polysulfides(LiPSs),but also causes the continuous accumulation of inactive sulfur species,resulting...The slow conversion of polyphase in lithium-sulfur(Li-S)batteries not only intensifies the shuttle effect of lithium polysulfides(LiPSs),but also causes the continuous accumulation of inactive sulfur species,resulting in rapid capacity attenuation and sluggish dynamic performance.Herein,the promoting effect of atomic interface stress on sulfur reaction was investigated via CoFe-CoFe_(2)O_(4)heterogeneous nanosheets with a cavity structure.The strain force induced by the in-situ precipitation of Co Fe bimetallic alloy in oxide matrix increased the d-band center,which was conducive to the interaction between catalyst and Li PSs.The sulfur cathode based on this two-dimensional(2D)nanosheet design showed an extremely high capacity of 751 mAh g^(-1)at 4 C.Even with a sulfur loading of 5.55 mg cm^(-2),its area capacity was still as high as 7.15 mAh cm^(-2).Meanwhile,the enhanced stability greatly improved the practical potential of Li-S batteries.展开更多
The magnetic proximity effect enables interfacial modulation of excitonic and spin-valley properties in transition metal dichalcogenides(TMDs),offering a versatile route toward next-generation spintronic and valleytro...The magnetic proximity effect enables interfacial modulation of excitonic and spin-valley properties in transition metal dichalcogenides(TMDs),offering a versatile route toward next-generation spintronic and valleytronic devices.However,the inherently weak photoluminescence(PL)of bright excitons—suppressed by proximity-induced darkening mechanisms—hinders the optical detection of magnetic interactions.Here,we demonstrate substantial exciton emission enhancement in CrOCl/WSe_(2)(HS)and twisted 90°-CrOCl/CrOCl/WSe_(2)(THS)heterostructures by employing plasmonic Au nanopillar arrays to activate surface plasmon polariton(SPP)coupling.The neutral exciton emission intensity is enhanced by factors of 5 and 18 for HS/Au and THS/Au,respectively,with enhancements persisting under high magnetic fields and elevated temperatures(~10-fold in THS/Au).Enabled by this amplification,we observe pronounced Zeeman splitting and modified intervalley relaxation pathways,indicating significant magnetic proximity interactions.Finite-element simulations and first-principles calculations reveal that the enhancement arises from local electromagnetic field concentration and layer-dependent interfacial coupling.Our results establish SPP-assisted PL enhancement as an effective strategy for probing weak magneto-optical signatures,paving the way for detailed exploration of exciton-magnon coupling and interface-driven quantum phenomena in twodimensional(2D)magnetic heterostructures.展开更多
Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electro...Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.展开更多
Optimizing the interfacial quality of halide perovskites heterojunction to promote the photogenerated charge separation is of great significance in photocatalytic reactions.However,the delicately regulation of interfa...Optimizing the interfacial quality of halide perovskites heterojunction to promote the photogenerated charge separation is of great significance in photocatalytic reactions.However,the delicately regulation of interfacial structure and properties of halide perovskites hybrid is still a big challenge owing to the growth uncontrollability and incompatibility between different constituents.Here we use Bi OBr nanosheets as the start-template to in situ epitaxially grow Cs_(3)Bi_(2)Br_(9)nanosheets by“cosharing”Bi and Br atoms strategy for designing a 2D/2D Cs_(3)Bi_(2)Br_(9)/BiOBr heterojunction.Systematic studies show that the epitaxial heterojunction can optimize the synergistic effect of Bi OBr and Cs_(3)Bi_(2)Br_(9)via the formation of tight-contact interfaces,strong interfacial electronic coupling and charge redistribution,which can not only drive the Z-scheme charge transfer mechanism to greatly promote the spatial separation of electronhole pairs,but also modulate the interfacial electronic structure to facilitate the adsorption and activation of toluene molecules.The heterojunction exhibited 62.3 and 2.4-fold photoactivity improvement for toluene oxidation to benzaldehyde than parental Bi OBr and Cs_(3)Bi_(2)Br_(9),respectively.This study not only proposed a novel dual atom-bridge protocol to engineer high-quality perovskite heterojunctions,but also uncovered the potential of heterojunction in promoting electron-hole separation as well as the application in photocatalytic organic synthesis.展开更多
Beam-tracking simulations have been extensively utilized in the study of collective beam instabilities in circular accelerators.Traditionally,many simulation codes have relied on central processing unit(CPU)-based met...Beam-tracking simulations have been extensively utilized in the study of collective beam instabilities in circular accelerators.Traditionally,many simulation codes have relied on central processing unit(CPU)-based methods,tracking on a single CPU core,or parallelizing the computation across multiple cores via the message passing interface(MPI).Although these approaches work well for single-bunch tracking,scaling them to multiple bunches significantly increases the computational load,which often necessitates the use of a dedicated multi-CPU cluster.To address this challenge,alternative methods leveraging General-Purpose computing on Graphics Processing Units(GPGPU)have been proposed,enabling tracking studies on a standalone desktop personal computer(PC).However,frequent CPU-GPU interactions,including data transfers and synchronization operations during tracking,can introduce communication overheads,potentially reducing the overall effectiveness of GPU-based computations.In this study,we propose a novel approach that eliminates this overhead by performing the entire tracking simulation process exclusively on the GPU,thereby enabling the simultaneous processing of all bunches and their macro-particles.Specifically,we introduce MBTRACK2-CUDA,a Compute Unified Device Architecture(CUDA)ported version of MBTRACK2,which facilitates efficient tracking of single-and multi-bunch collective effects by leveraging the full GPU-resident computation.展开更多
Benzalkonium chloride(BAC)is widely employed as a broad-spectrum biocide and has emerged as a significant environmental pollutant.Polymyxin B(PB)serves as the last-line defense for the treatment of Gram-negative patho...Benzalkonium chloride(BAC)is widely employed as a broad-spectrum biocide and has emerged as a significant environmental pollutant.Polymyxin B(PB)serves as the last-line defense for the treatment of Gram-negative pathogens.Previous studies reported that BAC-adapted Pseudomonas aeruginosa increased the tolerance to PB.Herein,we present the novel finding that the combination of BAC and PB exhibited synergistic antibacterial effects against P.aeruginosa.Time-killing assay demonstrated a significant reduction in bacterial cell viability.Scanning electron microscopy,zeta potential analysis,hydrophobicity measurements,and fluorescence probe analyses collectively revealed severe disruption of the cell envelope and membrane potential induced by the combination of BAC and PB.Transcriptomic analysis revealed that the BAC-PB combination notably downreg-ulated the expression of genes involved in lipid A modification and cell envelope production,including phoPQ,pmrAB,bamABCDE,lptABCDEG,lolB,yidC,and murJ.Additionally,the combination group exhibited augmented production of reactive oxygen species and diminished ATP synthesis.The expression of the genes associated with substance metabolism and energy generation was significantly impeded.This study provides significant implica-tions for the interactions of biocides and antibiotics on Gram-negative pathogens,while also addressing antibiotic resistance and developing the external treatment strategy for Pseudomonas-infected wounds and burns.展开更多
AIM:To evaluate and compare alterations in the effective lens position(ELP)and refractive outcomes among three distinct intraocular lens(IOL)types.METHODS:Patients with cataracts were enrolled and allocated to 3 group...AIM:To evaluate and compare alterations in the effective lens position(ELP)and refractive outcomes among three distinct intraocular lens(IOL)types.METHODS:Patients with cataracts were enrolled and allocated to 3 groups:Group A(implanted with the SN6CWS),Group B(implanted with the MI60),and Group C(implanted with the Aspira-aA).ELP measurements were obtained with swept-source optical coherence tomography(SS-OCT)at 1d,1wk,1mo,and 3mo postoperatively.Subjective refraction assessments were conducted at 1wk,1mo,and 3mo following surgery.RESULTS:The study included 189 eyes of 150 cataract patients(66 males).There were 77 eyes in Group A,55 eyes in Group B,and 57 eyes in Group C.The root mean square of the ELP(ELPRMS)within the initial 3mo was significantly lower for Group A than for Groups B and C.Refractive changes within Group A were not significant across the time points of 1wk,1mo,and 3mo.Conversely,both Group B and Group C demonstrated statistically significant shifts toward hyperopia from 1wk to 3mo postsurgery.CONCLUSION:Among the three IOLs examined,the SN6CWS IOL showes the greatest stability during the first 3mo postoperatively.Between 1wk and 3mo after surgery,notable hyperopic shifts are evident in eyes implanted with the MI60 and Aspira-aA IOLs,whereas refractive outcomes remain relatively constant in eyes implanted with SN6CWS IOLs.展开更多
Electrical and electronic devices face significant challenges in heatmanagement due to their compact size and high heat flux,which negatively impact performance and reliability.Conventional coolingmethods,such as forc...Electrical and electronic devices face significant challenges in heatmanagement due to their compact size and high heat flux,which negatively impact performance and reliability.Conventional coolingmethods,such as forced air cooling,often struggle to transfer heat efficiently.In contrast,thermoelectric coolers(TECs)provide an innovative active cooling solution to meet growing thermal management demands.In this research,a refrigerant based on mono ethylene glycol and distilled water was used instead of using gases,in addition to using thermoelectric cooling units instead of using a compressor in traditional refrigeration systems.This study evaluates the performance of a Peltierbased thermalmanagement systemby analyzing the effects of using two,three,and four Peltiermodules on cooling rates,power consumption,temperature reduction,and system efficiency.Experimental results indicate that increasing the number of Peltier modules significantly enhances cooling performance.The four-module system achieved an optimal balance between cooling speed and energy efficiency,reducing the temperature of a liquidmixture(30% mono ethylene glycol+70% distilled water plus laser dyes)to 8℃ in just 17 min.It demonstrated a cooling rate of 0.794℃/min and a high coefficient of performance(COP)of 1.2 while consuming less energy than the two-and three-module systems.Furthermore,the study revealed that increasing the number of modules led to faster air cooling and improved temperature reduction.These findings highlight the importance of selecting the optimal number of Peltier modules to enhance efficiency and cooling speed whileminimizing energy consumption.This makes TEC technology a sustainable and effective solution for applications requiring rapid and reliable thermal management.展开更多
The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) underg...The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) undergoes an antiferromagnetic(AFM)transition at T_(N)∼5 K.Under high pressures within 8.9 GPa,we find that Kondo scattering contributes differently to the high-temperature resistance,R(T),depending on the applied current direction,demonstrating a significantly anisotropic Kondo effect.The complete P–T phase diagram has been constructed,in which the pressure dependence of T_(N) exhibits a dome-like shape.The AFM order remains robust under pressure,even when the coherence temperature T^(*) far exceeds 300 K.We attribute the observed anisotropic Kondo effect and the robust AFM to the underlying anisotropy in electronic hybridization under high pressure.展开更多
In winter 2018,an aerosol physicochemical experiment was conducted in the Western Pacific Ocean(WPO)aboard the Research Vessel KEXUE of Chinese Academy of Sciences.This study systematically investigated both natural a...In winter 2018,an aerosol physicochemical experiment was conducted in the Western Pacific Ocean(WPO)aboard the Research Vessel KEXUE of Chinese Academy of Sciences.This study systematically investigated both natural and anthropogenic effects on marine aerosols optical properties,as well as the applicability of multi-satellite products and IMPROVE equation.The averaged aerosol optical depth(AOD500 nm)was 0.31±0.16 andÅngström exponent440–675 nm was 0.29±0.30.In offshore China,significant anthropogenic emissions affected the marine environment.In remote WPO,dust aerosols transported from northern China,Siberia,Central Asia,and those settling from the upper troposphere originating from north Africa,Arabian peninsula,and western India,were dominant.The spatial trends of AOD were opposite in the mid-latitude and southern seas of WPO.The highest AOD,0.32±0.23,appeared along the coast of South Asia at mid-latitude,decreasing from offshore seas to remote oceans.In low-latitude and equatorial seas,AOD significantly increased from coast to remote oceans.Ångström exponent dropped significantly from the coast to remote oceans as anthropogenic influence diminished across the entire WPO.Correlation analysis showed that both MODIS-C6 and Himawari AOD prod-ucts showed similar applicability in coastal urban areas,while Himawari AOD is highly recommended for coastal background and marine environment due to its finer resolution.The extinction coefficient derived from PM_(2.5) chemical compositions using IMPROVE algorithm exhibited a significant correlation(R^(2)=0.58)with the con-currently measured AOD in the absence of long-distance transport,suggesting that the IMPROVE is a reasonable proxy of the columnar average of marine aerosol extinctions free from transport influences.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
Background:While the treatment of metastatic renal cell carcinoma(mRCC)is evolving due to immune checkpoint inhibitors(ICIs),optimal strategies for later lines of therapy have yet to be defined.The combination of lenv...Background:While the treatment of metastatic renal cell carcinoma(mRCC)is evolving due to immune checkpoint inhibitors(ICIs),optimal strategies for later lines of therapy have yet to be defined.The combination of lenvatinib and everolimus represents a viable option,and the present review aimed to summarize its activity,effectiveness,and safety.Methods:A systematic review of the literature was conducted using PubMed,targeting studies published between 2018 and 2025.Eligible studies included English-language prospective and retrospective trials reporting survival outcomes in mRCC patients treated with lenvatinib and everolimus after at least one ICI-containing regimen.Results:Nine studies met the inclusion criteria,encompassing a total of 441 patients.The lenvatinib and everolimus combination was primarily used in the third and subsequent lines of therapy.Median overall survival ranged from 7.5 to 24.5 months,while median progression-free survival was more consistent,between 6.1 and 6.7 months,except for one study reporting 12.9 months.Objective response rates varied widely(14.0%–55.7%).Adverse events of grade≥3 did not exceed the expected rate,with diarrhoea and proteinuria as the most reported events.Dose reductions and treatment discontinuations due to toxicity occurred but were generally lower than in prior pivotal trials.Conclusions:Real-world evidence suggests that lenvatinib and everolimus represent an effective and safe option after ICI failure in mRCC patients.Nevertheless,the lack of randomized phase III trials and the heterogeneity of existing studies highlight the need for more robust prospective research to guide post-ICI therapeutic strategies.展开更多
Lithium metal batteries(LMBs)have been regarded as one of the most promising alternatives in the post-lithium battery era due to their high energy density,which meets the needs of light-weight electronic devices and l...Lithium metal batteries(LMBs)have been regarded as one of the most promising alternatives in the post-lithium battery era due to their high energy density,which meets the needs of light-weight electronic devices and long-range electric vehicles.However,technical barriers such as dendrite growth and poor Li plating/stripping reversibility severely hinder the practical application of LMBs.However,lithium nitrate(LiNO_(3))is found to be able to stabilize the Li/electrolyte interface and has been used to address the above challenges.To date,considerable research efforts have been devoted toward understanding the roles of LiNO_(3) in regulating the surface properties of Li anodes and toward the development of many effective strategies.These research efforts are partially mentioned in some articles on LMBs and yet have not been reviewed systematically.To fill this gap,we discuss the recent advances in fundamental and technological research on LiNO_(3) and its derivatives for improving the performances of LMBs,particularly for Li-sulfur(S),Li-oxygen(O),and Li-Li-containing transition-metal oxide(LTMO)batteries,as well as LiNO_(3)-containing recipes for precursors in battery materials and interphase fabrication.This review pays attention to the effects of LiNO_(3) in lithium-based batteries,aiming to provide scientific guidance for the optimization of electrode/electrolyte interfaces and enrich the design of advanced LMBs.展开更多
Fe_2O_3 nanorods and hexagonal nanoplates were synthesized and used as the promoters for Pt electrocatalysts toward the methanol oxidation reaction（MOR） in an alkaline electrolyte.The catalysts were characterized by...Fe_2O_3 nanorods and hexagonal nanoplates were synthesized and used as the promoters for Pt electrocatalysts toward the methanol oxidation reaction（MOR） in an alkaline electrolyte.The catalysts were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction,X-ray photoelectron spectroscopy,cyclic voltammetry and chronoamperometry.The results show that the presence of Fe_2O_3 in the electrocatalysts can promote the kinetic processes of MOR on Pt,and this promoting effect is related to the morphology of the Fe_2O_3 promoter.The catalyst with Fe_2O_3 nanorods as the promoter（Pt-Fe_2O_3/C-R） exhibits much higher catalytic activity and stability than that with Fe_2O_3 nanoplates as the promoter（Pt-Fe_2O_3/C-P）.The mass activity and specific activity of Pt in a Pt-Fe_2O_3/C-R catalyst are 5.32 A/mgpt and 162.7 A/m^2_（Pt）,respectively,which are approximately 1.67 and 2.04 times those of the Pt-Fe_2O_3/C-P catalyst,and 4.19 and 6.16 times those of a commercial PtRu/C catalyst,respectively.Synergistic effects between Fe_2O_3 and Pt and the high content of Pt oxides in the catalysts are responsible for the improvement.These findings contribute not only to our understanding of the MOR mechanism but also to the development of advanced electrocatalysts with high catalytic properties for direct methanol fuel cells.展开更多
[Objective] The study aimed to explore the influences of Plant growth-promoting rhizobacteria（PGPR）on salt tolerance and physiological effect of seedlings of Medicago sative L.[Method] Three different kinds of growt...[Objective] The study aimed to explore the influences of Plant growth-promoting rhizobacteria（PGPR）on salt tolerance and physiological effect of seedlings of Medicago sative L.[Method] Three different kinds of growth-promoting rhizobacteria solutions were used to spray on M.sative seedlings and the influences of different kinds of growth-promoting rhizobacteria on physiological and biochemical characteristics of M.sative seedlings under 75 mmol/L of Na2CO3 were studied.[Results] Compared with the control group,the chlorophyll,free proline,soluble sugar and soluble protein content of M.sative seedlings treated with different kinds of growth-promoting rhizobacteria were increased,while the effect of CS3 treatment was the best.[Conclusion] The growth-promoting rhizobacteria could promote growth and development of M.sative as well as increased its resistance.展开更多
The effect of super absorbent polymer（SAP） on the formation of tetrahydrofuran（THF） hydrate was studied by the successional cooling method.It was found that THF solution samples with 0.004 wt% and 0.03 wt% of SAP ...The effect of super absorbent polymer（SAP） on the formation of tetrahydrofuran（THF） hydrate was studied by the successional cooling method.It was found that THF solution samples with 0.004 wt% and 0.03 wt% of SAP formed THF hydrate completely during the same cooling process.The corresponding induction time was 16-29 min,14-31 min,respectively,which was obviously shorter than that of THF solution samples without SAP（25-62 min）.It indicated that SAP accelerated the formation of THF hydrate.At the same time,the pictures of hydrate formation with and without SAP had been compared.It was found that SAP did not change the morphology of the hydrate.Finally,the mechanism of SAP promoting effect on the formation of THF hydrate was suggested.展开更多
The seeds and sprouts of mung bean are very common cruise in Asia.Evidence showed that bioactive compounds in mung bean have emerged as an increasing scientific interest due to their role in the prevention of degenera...The seeds and sprouts of mung bean are very common cruise in Asia.Evidence showed that bioactive compounds in mung bean have emerged as an increasing scientific interest due to their role in the prevention of degenerative diseases.All data of in vitro,in vivo and clinical studies of mung bean and its impact on human health were collected from a library database and electronic search.Botanical,phytochemical and pharmacological information was gathered and orchestrated.Remarkable studies have been demonstrated,showing the enhancement of metabolites in mung bean during the sprouting process,which possesses various health benefiting bioactive compounds.These compounds have been frequently attributed to their antioxidant,anti-diabetic,antimicrobial,anti-hyperlipidemic and antihypertensive effect,anti-inflammatory,and anticancer,anti-tumor and anti-mutagenic properties.In this critical review,we aimed to study the insight of the nutritional compositions,phytochemistry,and healthpromoting effects of mung bean and its sprouts.The various curative potential of mung bean provides successive preclinical outcomes in the field of drug discovery and this review strongly recommends that mung bean is an excellent nutritive legume,which modulates or prevents chronic degenerative diseases.展开更多
The construction of highly active catalysts for methanol oxidation reaction(MOR)is central to direct methanol fuel cells.Tremendous progress has been made in transition metal phosphides(TMPs)based catalysts.However,TM...The construction of highly active catalysts for methanol oxidation reaction(MOR)is central to direct methanol fuel cells.Tremendous progress has been made in transition metal phosphides(TMPs)based catalysts.However,TMPs would be partially damaged and transformed into new substances(e.g.,Pt-M-P composite,where M represents a second transition metal)during Pt deposition process.This would pose a large obstacle to the cognition of the real promoting effects of TMPs in MOR.Herein,Co_(2)P co-catalysts(Pt-P/Co_(2)P@NPC,where NPC stands for N and P co-doped carbon)and Pt-Co-P composite catalysts(Pt-CoP/NPC)were controllably synthesized.Electrocatalysis tests show that the Pt-Co-P/NPC exhibits superior MOR activity as high as 1016 m A/mg_(Pt),significantly exceeding that of Pt-P/Co_(2)P@NPC(345 m A/mg_(Pt)).This result indicates that the promoting effect is ascribed primarily to the resultant Pt-Co-P composite,in sharply contrast to previous viewpoint that Co_(2)P itself improves the activity.Further mechanistic studies reveal that Pt-Co-P/NPC exhibits much stronger electron interaction and thus manifesting a remarkably weaker CO absorption than Pt-P/Co_(2)P@NPC and Pt/C.Moreover,Pt-Co-P is also more capable of producing oxygen-containing adsorbate and thus accelerating the removal of surface-bonded CO^(*),ultimately boosting the MOR performance.展开更多
The effect of chloride ions on a monoclinic ZrO2-supported RuOx （RuOx/m-ZrO2） catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate （MF） at a low tem...The effect of chloride ions on a monoclinic ZrO2-supported RuOx （RuOx/m-ZrO2） catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate （MF） at a low temperature of 373 K. The m-ZrO2 support was Cl-free, and Cl- ions were introduced into the RuOx/m-ZrO2 catalyst by impregnation with zirconium oxychloride or ammonium chloride and subsequent thermal treatment in air at 673 K. The structures of these catalysts were characterized by X-ray diffraction, Raman and X-ray photoelectron spectroscopies. Their reducibility was probed by temperature-programmed reduction in H2. The RuOx domains were present as highly dispersed Rut42- structure on m-ZrO2 with similar reducibility for the RuOx/m-ZrO2 samples irrespective of modification with or without Cl ions. Introduction of appropriate amounts of zirconium oxychloride into RuOx/m-ZrO2 led to a remarkable increase in the methanol oxidation rate and MF selectivity, whereas introduction of ammonium chloride or zirconyl nitrate significantly inhibited the catalytic performance of RuOx/m-ZrO2. The promoting effect of Cl- ions derived from zirconium oxychloride can be tentatively attributed to their roles in facilitating the adsorption of methanol and desorption of MF product or its intermediates. This finding provides novel insights into the promoting effect of Cl- ions on oxides-based catalysts for selective oxidation reactions.展开更多
基金Project supported by the National Natural Science Foundation of China (21971129, 21961022, 21661023)the Inner Mongolia Autonomous Region 2022 Leading Talent Team of Science and Technology (2022LJRC0008)+6 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region of China(2022MS02014, 2021BS02007)the Program for Innovative Research Team in Universities of Inner Mongolia Autonomous Region (NJYT23031)the 111 Project(D20033)the “Grassland Leading Talent” Program of Inner Mongoliathe “Grassland-Talent” Innovation Team of Inner Mongoliathe “Science and Technology for a Better Development of Inner Mongolia” Program (2020XM03)the Science and Technology Project of Ordos (2021 ZDI 11-14)。
文摘CeO_(2)is increasingly recognized as a viable polishing abrasive for SiO_(2)-based substrates,such as K9 glass,leveraging its intrinsic chemical mechanical polishing property.Although LaOF can improve the performance of CeO_(2)abrasive,the specific mechanism underlying this enhancement remains elusive.Herein,LaOF-CeO_(2)composite abrasive was prepared by co-precipitation method,aiming to elaborate on the influence of LaOF on the abrasive's polishing efficiency.It is found that the integration of LaOF results in the formation of LaOF-CeO_(2)composite characterized by a remarkably reduced primary particle size of approximately 41 nm,which primarily accounts for the improvement in polishing performance.Furthermore,the increasement in Ce^(3+)content and the Zeta potential both contribute to the superior function of the composite abrasive.Notably,the synergistic effect of these parameters is manifested in an elevated material removal rate reaching 1091.197 nm/min,coupled with a minimized surface roughness of as low as 0.546 nm when applied to K9 glass surface.The findings of this work offer novel insights into the role of LaOF in facilitating the performance of Ce-based abrasives,potentially influencing future advancements in the field of precision surface processing.
基金the National Natural Science Foundation of China(No.52207227)the Fundamental Research Funds for the Central Universities(No.0213-14380196)+1 种基金the Science and Technology Project of Nanchang(No.2017-SJSYS-008)the Anhui Absorption Spectroscopy Analysis Instrument Co,Ltd.for XAFS measurements and analysis。
文摘The slow conversion of polyphase in lithium-sulfur(Li-S)batteries not only intensifies the shuttle effect of lithium polysulfides(LiPSs),but also causes the continuous accumulation of inactive sulfur species,resulting in rapid capacity attenuation and sluggish dynamic performance.Herein,the promoting effect of atomic interface stress on sulfur reaction was investigated via CoFe-CoFe_(2)O_(4)heterogeneous nanosheets with a cavity structure.The strain force induced by the in-situ precipitation of Co Fe bimetallic alloy in oxide matrix increased the d-band center,which was conducive to the interaction between catalyst and Li PSs.The sulfur cathode based on this two-dimensional(2D)nanosheet design showed an extremely high capacity of 751 mAh g^(-1)at 4 C.Even with a sulfur loading of 5.55 mg cm^(-2),its area capacity was still as high as 7.15 mAh cm^(-2).Meanwhile,the enhanced stability greatly improved the practical potential of Li-S batteries.
基金the National Natural Science Foundation of China(No.52373311)the Innovation Program for Quantum Science and Technology(No.2021ZD0301605)+3 种基金provided by the National Natural Science Foundation of China(Nos.92263202 and 12374020)the National Key Research and Development Program of China(No.2020YFA0711502)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB33000000)support from the Australian Research Council(ARC Discovery Project,No.DP180102976).
文摘The magnetic proximity effect enables interfacial modulation of excitonic and spin-valley properties in transition metal dichalcogenides(TMDs),offering a versatile route toward next-generation spintronic and valleytronic devices.However,the inherently weak photoluminescence(PL)of bright excitons—suppressed by proximity-induced darkening mechanisms—hinders the optical detection of magnetic interactions.Here,we demonstrate substantial exciton emission enhancement in CrOCl/WSe_(2)(HS)and twisted 90°-CrOCl/CrOCl/WSe_(2)(THS)heterostructures by employing plasmonic Au nanopillar arrays to activate surface plasmon polariton(SPP)coupling.The neutral exciton emission intensity is enhanced by factors of 5 and 18 for HS/Au and THS/Au,respectively,with enhancements persisting under high magnetic fields and elevated temperatures(~10-fold in THS/Au).Enabled by this amplification,we observe pronounced Zeeman splitting and modified intervalley relaxation pathways,indicating significant magnetic proximity interactions.Finite-element simulations and first-principles calculations reveal that the enhancement arises from local electromagnetic field concentration and layer-dependent interfacial coupling.Our results establish SPP-assisted PL enhancement as an effective strategy for probing weak magneto-optical signatures,paving the way for detailed exploration of exciton-magnon coupling and interface-driven quantum phenomena in twodimensional(2D)magnetic heterostructures.
基金supported by the National Natural Science Foundation of China(No.62464010)Spring City Plan-Special Program for Young Talents(K202005007)+2 种基金Yunnan Talents Support Plan for Young Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Frontier Research Team of Kunming University 2023.
文摘Rechargeable Zn/Sn-air batteries have received considerable attention as promising energy storage devices.However,the electrochemical performance of these batteries is significantly constrained by the sluggish electrocatalytic reaction kinetics at the cathode.The integration of light energy into Zn/Sn-air batteries is a promising strategy for enhancing their performance.However,the photothermal and photoelectric effects generate heat in the battery under prolonged solar irradiation,leading to air cathode instability.This paper presents the first design and synthesis of Ni_(2)-1,5-diamino-4,8-dihydroxyanthraquinone(Ni_(2)DDA),an electronically conductiveπ-d conjugated metal-organic framework(MOF).Ni_(2)DDA exhibits both photoelectric and photothermal effects,with an optical band gap of~1.14 eV.Under illumination,Ni_(2)DDA achieves excellent oxygen evolution reaction performance(with an overpotential of 245 mV vs.reversible hydrogen electrode at 10 mA cm^(−2))and photothermal stability.These properties result from the synergy between the photoelectric and photothermal effects of Ni_(2)DDA.Upon integration into Zn/Sn-air batteries,Ni_(2)DDA ensures excellent cycling stability under light and exhibits remarkable performance in high-temperature environments up to 80℃.This study experimentally confirms the stable operation of photo-assisted Zn/Sn-air batteries under high-temperature conditions for the first time and provides novel insights into the application of electronically conductive MOFs in photoelectrocatalysis and photothermal catalysis.
基金financially supported by the National Natural Science Foundation of China(Nos.22175202,22005351,22365016)the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515010180)+3 种基金Program of Guangzhou Science and Technology(No.202201011591)the Science and Technology Innovation Program of Hunan Province(No.2023RC3179)Scientific Research Start-up Fund of Jishou University(No.1122003)support of National Supercomputer Center in Sun Yat-sen University,Guangzhou。
文摘Optimizing the interfacial quality of halide perovskites heterojunction to promote the photogenerated charge separation is of great significance in photocatalytic reactions.However,the delicately regulation of interfacial structure and properties of halide perovskites hybrid is still a big challenge owing to the growth uncontrollability and incompatibility between different constituents.Here we use Bi OBr nanosheets as the start-template to in situ epitaxially grow Cs_(3)Bi_(2)Br_(9)nanosheets by“cosharing”Bi and Br atoms strategy for designing a 2D/2D Cs_(3)Bi_(2)Br_(9)/BiOBr heterojunction.Systematic studies show that the epitaxial heterojunction can optimize the synergistic effect of Bi OBr and Cs_(3)Bi_(2)Br_(9)via the formation of tight-contact interfaces,strong interfacial electronic coupling and charge redistribution,which can not only drive the Z-scheme charge transfer mechanism to greatly promote the spatial separation of electronhole pairs,but also modulate the interfacial electronic structure to facilitate the adsorption and activation of toluene molecules.The heterojunction exhibited 62.3 and 2.4-fold photoactivity improvement for toluene oxidation to benzaldehyde than parental Bi OBr and Cs_(3)Bi_(2)Br_(9),respectively.This study not only proposed a novel dual atom-bridge protocol to engineer high-quality perovskite heterojunctions,but also uncovered the potential of heterojunction in promoting electron-hole separation as well as the application in photocatalytic organic synthesis.
基金supported by the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(MSIT)(No.RS-2022-00143178)the Ministry of Education(MOE)(Nos.2022R1A6A3A13053896 and 2022R1F1A1074616),Republic of Korea.
文摘Beam-tracking simulations have been extensively utilized in the study of collective beam instabilities in circular accelerators.Traditionally,many simulation codes have relied on central processing unit(CPU)-based methods,tracking on a single CPU core,or parallelizing the computation across multiple cores via the message passing interface(MPI).Although these approaches work well for single-bunch tracking,scaling them to multiple bunches significantly increases the computational load,which often necessitates the use of a dedicated multi-CPU cluster.To address this challenge,alternative methods leveraging General-Purpose computing on Graphics Processing Units(GPGPU)have been proposed,enabling tracking studies on a standalone desktop personal computer(PC).However,frequent CPU-GPU interactions,including data transfers and synchronization operations during tracking,can introduce communication overheads,potentially reducing the overall effectiveness of GPU-based computations.In this study,we propose a novel approach that eliminates this overhead by performing the entire tracking simulation process exclusively on the GPU,thereby enabling the simultaneous processing of all bunches and their macro-particles.Specifically,we introduce MBTRACK2-CUDA,a Compute Unified Device Architecture(CUDA)ported version of MBTRACK2,which facilitates efficient tracking of single-and multi-bunch collective effects by leveraging the full GPU-resident computation.
基金supported by the National Natural Science Foundation of China(No.32170121).
文摘Benzalkonium chloride(BAC)is widely employed as a broad-spectrum biocide and has emerged as a significant environmental pollutant.Polymyxin B(PB)serves as the last-line defense for the treatment of Gram-negative pathogens.Previous studies reported that BAC-adapted Pseudomonas aeruginosa increased the tolerance to PB.Herein,we present the novel finding that the combination of BAC and PB exhibited synergistic antibacterial effects against P.aeruginosa.Time-killing assay demonstrated a significant reduction in bacterial cell viability.Scanning electron microscopy,zeta potential analysis,hydrophobicity measurements,and fluorescence probe analyses collectively revealed severe disruption of the cell envelope and membrane potential induced by the combination of BAC and PB.Transcriptomic analysis revealed that the BAC-PB combination notably downreg-ulated the expression of genes involved in lipid A modification and cell envelope production,including phoPQ,pmrAB,bamABCDE,lptABCDEG,lolB,yidC,and murJ.Additionally,the combination group exhibited augmented production of reactive oxygen species and diminished ATP synthesis.The expression of the genes associated with substance metabolism and energy generation was significantly impeded.This study provides significant implica-tions for the interactions of biocides and antibiotics on Gram-negative pathogens,while also addressing antibiotic resistance and developing the external treatment strategy for Pseudomonas-infected wounds and burns.
基金Supported by the Zhejiang Medical Health Science and Technology Project(No.2021KY217)the Basic Public Welfare Research Project of Wenzhou Municipal Science and Technology Bureau(No.2024Y1221).
文摘AIM:To evaluate and compare alterations in the effective lens position(ELP)and refractive outcomes among three distinct intraocular lens(IOL)types.METHODS:Patients with cataracts were enrolled and allocated to 3 groups:Group A(implanted with the SN6CWS),Group B(implanted with the MI60),and Group C(implanted with the Aspira-aA).ELP measurements were obtained with swept-source optical coherence tomography(SS-OCT)at 1d,1wk,1mo,and 3mo postoperatively.Subjective refraction assessments were conducted at 1wk,1mo,and 3mo following surgery.RESULTS:The study included 189 eyes of 150 cataract patients(66 males).There were 77 eyes in Group A,55 eyes in Group B,and 57 eyes in Group C.The root mean square of the ELP(ELPRMS)within the initial 3mo was significantly lower for Group A than for Groups B and C.Refractive changes within Group A were not significant across the time points of 1wk,1mo,and 3mo.Conversely,both Group B and Group C demonstrated statistically significant shifts toward hyperopia from 1wk to 3mo postsurgery.CONCLUSION:Among the three IOLs examined,the SN6CWS IOL showes the greatest stability during the first 3mo postoperatively.Between 1wk and 3mo after surgery,notable hyperopic shifts are evident in eyes implanted with the MI60 and Aspira-aA IOLs,whereas refractive outcomes remain relatively constant in eyes implanted with SN6CWS IOLs.
文摘Electrical and electronic devices face significant challenges in heatmanagement due to their compact size and high heat flux,which negatively impact performance and reliability.Conventional coolingmethods,such as forced air cooling,often struggle to transfer heat efficiently.In contrast,thermoelectric coolers(TECs)provide an innovative active cooling solution to meet growing thermal management demands.In this research,a refrigerant based on mono ethylene glycol and distilled water was used instead of using gases,in addition to using thermoelectric cooling units instead of using a compressor in traditional refrigeration systems.This study evaluates the performance of a Peltierbased thermalmanagement systemby analyzing the effects of using two,three,and four Peltiermodules on cooling rates,power consumption,temperature reduction,and system efficiency.Experimental results indicate that increasing the number of Peltier modules significantly enhances cooling performance.The four-module system achieved an optimal balance between cooling speed and energy efficiency,reducing the temperature of a liquidmixture(30% mono ethylene glycol+70% distilled water plus laser dyes)to 8℃ in just 17 min.It demonstrated a cooling rate of 0.794℃/min and a high coefficient of performance(COP)of 1.2 while consuming less energy than the two-and three-module systems.Furthermore,the study revealed that increasing the number of modules led to faster air cooling and improved temperature reduction.These findings highlight the importance of selecting the optimal number of Peltier modules to enhance efficiency and cooling speed whileminimizing energy consumption.This makes TEC technology a sustainable and effective solution for applications requiring rapid and reliable thermal management.
基金supported by the National Key Research and Development Program of Chinathe National Natural Science Foundation of China (Grant Nos.2024YFA1408000,12474097,and2023YFA1406001)+2 种基金the Guangdong Provincial Quantum Science Strategic Initiative (Grant No.GDZX2201001)the Center for Computational Science and Engineering at Southern University of Science and Technology,the Major Science and Technology Infrastructure Project of Material Genome Big-science Facilities Platform supported by Municipal Development and Reform Commission of Shenzhen(for J.L.Z.and Y.L.)the Chinese funding sources applied via HPSTAR。
文摘The magnetic properties and Kondo effect in Ce3TiBi5 with a quasi-one-dimensional structure were investigated using in situ high-pressure resistivity measurements up to 48 GPa.At ambient pressure,Ce_(3)TiBi_(5) undergoes an antiferromagnetic(AFM)transition at T_(N)∼5 K.Under high pressures within 8.9 GPa,we find that Kondo scattering contributes differently to the high-temperature resistance,R(T),depending on the applied current direction,demonstrating a significantly anisotropic Kondo effect.The complete P–T phase diagram has been constructed,in which the pressure dependence of T_(N) exhibits a dome-like shape.The AFM order remains robust under pressure,even when the coherence temperature T^(*) far exceeds 300 K.We attribute the observed anisotropic Kondo effect and the robust AFM to the underlying anisotropy in electronic hybridization under high pressure.
基金supported by the CAS Strategic Priority Research Program(No.XDB0760102),the Ministry of Science and Technology of China(No.2022YFF0802501)the Major Science and Technology Infrastructure Maintenance and Transformation Project of the Chinese Academy of Sciences,Shanghai Science and Technology Innovation Action Plan-Phospherus Project(No.23YF1426200)the National Key Research and Development Program of China(No.2024YFE0212200).
文摘In winter 2018,an aerosol physicochemical experiment was conducted in the Western Pacific Ocean(WPO)aboard the Research Vessel KEXUE of Chinese Academy of Sciences.This study systematically investigated both natural and anthropogenic effects on marine aerosols optical properties,as well as the applicability of multi-satellite products and IMPROVE equation.The averaged aerosol optical depth(AOD500 nm)was 0.31±0.16 andÅngström exponent440–675 nm was 0.29±0.30.In offshore China,significant anthropogenic emissions affected the marine environment.In remote WPO,dust aerosols transported from northern China,Siberia,Central Asia,and those settling from the upper troposphere originating from north Africa,Arabian peninsula,and western India,were dominant.The spatial trends of AOD were opposite in the mid-latitude and southern seas of WPO.The highest AOD,0.32±0.23,appeared along the coast of South Asia at mid-latitude,decreasing from offshore seas to remote oceans.In low-latitude and equatorial seas,AOD significantly increased from coast to remote oceans.Ångström exponent dropped significantly from the coast to remote oceans as anthropogenic influence diminished across the entire WPO.Correlation analysis showed that both MODIS-C6 and Himawari AOD prod-ucts showed similar applicability in coastal urban areas,while Himawari AOD is highly recommended for coastal background and marine environment due to its finer resolution.The extinction coefficient derived from PM_(2.5) chemical compositions using IMPROVE algorithm exhibited a significant correlation(R^(2)=0.58)with the con-currently measured AOD in the absence of long-distance transport,suggesting that the IMPROVE is a reasonable proxy of the columnar average of marine aerosol extinctions free from transport influences.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
文摘Background:While the treatment of metastatic renal cell carcinoma(mRCC)is evolving due to immune checkpoint inhibitors(ICIs),optimal strategies for later lines of therapy have yet to be defined.The combination of lenvatinib and everolimus represents a viable option,and the present review aimed to summarize its activity,effectiveness,and safety.Methods:A systematic review of the literature was conducted using PubMed,targeting studies published between 2018 and 2025.Eligible studies included English-language prospective and retrospective trials reporting survival outcomes in mRCC patients treated with lenvatinib and everolimus after at least one ICI-containing regimen.Results:Nine studies met the inclusion criteria,encompassing a total of 441 patients.The lenvatinib and everolimus combination was primarily used in the third and subsequent lines of therapy.Median overall survival ranged from 7.5 to 24.5 months,while median progression-free survival was more consistent,between 6.1 and 6.7 months,except for one study reporting 12.9 months.Objective response rates varied widely(14.0%–55.7%).Adverse events of grade≥3 did not exceed the expected rate,with diarrhoea and proteinuria as the most reported events.Dose reductions and treatment discontinuations due to toxicity occurred but were generally lower than in prior pivotal trials.Conclusions:Real-world evidence suggests that lenvatinib and everolimus represent an effective and safe option after ICI failure in mRCC patients.Nevertheless,the lack of randomized phase III trials and the heterogeneity of existing studies highlight the need for more robust prospective research to guide post-ICI therapeutic strategies.
基金supported by the Yunnan Fundamental Research Projects(Grant Nos.202401AU070163 and 202501AT070298)the Yunnan Engineering Research Center Innovation Ability Construction and Enhancement Projects(Grant No.2023-XMDJ-00617107)+5 种基金the University Service Key Industry Project of Yunnan Province(Grant No.FWCY-ZD2024005)the Expert Workstation Support Project of Yunnan Province(Grant No.202405AF140069)the Scientific Research Foundation of Kunming University of Science and Technology(Grant No.20220122)the Analysis and Test Foundation of Kunming University of Science and Technology(Grant No.2023T20220122)the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Grant No.2025QN02057)the Ordos City Strategic Pioneering Science and Technology Special Program for New Energy(Grant No.DC2400003365).
文摘Lithium metal batteries(LMBs)have been regarded as one of the most promising alternatives in the post-lithium battery era due to their high energy density,which meets the needs of light-weight electronic devices and long-range electric vehicles.However,technical barriers such as dendrite growth and poor Li plating/stripping reversibility severely hinder the practical application of LMBs.However,lithium nitrate(LiNO_(3))is found to be able to stabilize the Li/electrolyte interface and has been used to address the above challenges.To date,considerable research efforts have been devoted toward understanding the roles of LiNO_(3) in regulating the surface properties of Li anodes and toward the development of many effective strategies.These research efforts are partially mentioned in some articles on LMBs and yet have not been reviewed systematically.To fill this gap,we discuss the recent advances in fundamental and technological research on LiNO_(3) and its derivatives for improving the performances of LMBs,particularly for Li-sulfur(S),Li-oxygen(O),and Li-Li-containing transition-metal oxide(LTMO)batteries,as well as LiNO_(3)-containing recipes for precursors in battery materials and interphase fabrication.This review pays attention to the effects of LiNO_(3) in lithium-based batteries,aiming to provide scientific guidance for the optimization of electrode/electrolyte interfaces and enrich the design of advanced LMBs.
基金supported by the National Natural Science Foundation of China(21403125,21403124)the Scientific Research Foundation for the Outstanding Young Scientist of Shandong Province(BS2011NJ009)~~
文摘Fe_2O_3 nanorods and hexagonal nanoplates were synthesized and used as the promoters for Pt electrocatalysts toward the methanol oxidation reaction（MOR） in an alkaline electrolyte.The catalysts were characterized by scanning electron microscopy,transmission electron microscopy,X-ray diffraction,X-ray photoelectron spectroscopy,cyclic voltammetry and chronoamperometry.The results show that the presence of Fe_2O_3 in the electrocatalysts can promote the kinetic processes of MOR on Pt,and this promoting effect is related to the morphology of the Fe_2O_3 promoter.The catalyst with Fe_2O_3 nanorods as the promoter（Pt-Fe_2O_3/C-R） exhibits much higher catalytic activity and stability than that with Fe_2O_3 nanoplates as the promoter（Pt-Fe_2O_3/C-P）.The mass activity and specific activity of Pt in a Pt-Fe_2O_3/C-R catalyst are 5.32 A/mgpt and 162.7 A/m^2_（Pt）,respectively,which are approximately 1.67 and 2.04 times those of the Pt-Fe_2O_3/C-P catalyst,and 4.19 and 6.16 times those of a commercial PtRu/C catalyst,respectively.Synergistic effects between Fe_2O_3 and Pt and the high content of Pt oxides in the catalysts are responsible for the improvement.These findings contribute not only to our understanding of the MOR mechanism but also to the development of advanced electrocatalysts with high catalytic properties for direct methanol fuel cells.
基金Supported by National Natural Science Foundation of China(30970554)~~
文摘[Objective] The study aimed to explore the influences of Plant growth-promoting rhizobacteria（PGPR）on salt tolerance and physiological effect of seedlings of Medicago sative L.[Method] Three different kinds of growth-promoting rhizobacteria solutions were used to spray on M.sative seedlings and the influences of different kinds of growth-promoting rhizobacteria on physiological and biochemical characteristics of M.sative seedlings under 75 mmol/L of Na2CO3 were studied.[Results] Compared with the control group,the chlorophyll,free proline,soluble sugar and soluble protein content of M.sative seedlings treated with different kinds of growth-promoting rhizobacteria were increased,while the effect of CS3 treatment was the best.[Conclusion] The growth-promoting rhizobacteria could promote growth and development of M.sative as well as increased its resistance.
文摘The effect of super absorbent polymer（SAP） on the formation of tetrahydrofuran（THF） hydrate was studied by the successional cooling method.It was found that THF solution samples with 0.004 wt% and 0.03 wt% of SAP formed THF hydrate completely during the same cooling process.The corresponding induction time was 16-29 min,14-31 min,respectively,which was obviously shorter than that of THF solution samples without SAP（25-62 min）.It indicated that SAP accelerated the formation of THF hydrate.At the same time,the pictures of hydrate formation with and without SAP had been compared.It was found that SAP did not change the morphology of the hydrate.Finally,the mechanism of SAP promoting effect on the formation of THF hydrate was suggested.
基金The work was jointly supported by two grants(Project code:UIC 201624 and UIC 201714)from Beijing Normal University-Hong Kong Baptist University United International College,Zhuhai,Guangdong,China.
文摘The seeds and sprouts of mung bean are very common cruise in Asia.Evidence showed that bioactive compounds in mung bean have emerged as an increasing scientific interest due to their role in the prevention of degenerative diseases.All data of in vitro,in vivo and clinical studies of mung bean and its impact on human health were collected from a library database and electronic search.Botanical,phytochemical and pharmacological information was gathered and orchestrated.Remarkable studies have been demonstrated,showing the enhancement of metabolites in mung bean during the sprouting process,which possesses various health benefiting bioactive compounds.These compounds have been frequently attributed to their antioxidant,anti-diabetic,antimicrobial,anti-hyperlipidemic and antihypertensive effect,anti-inflammatory,and anticancer,anti-tumor and anti-mutagenic properties.In this critical review,we aimed to study the insight of the nutritional compositions,phytochemistry,and healthpromoting effects of mung bean and its sprouts.The various curative potential of mung bean provides successive preclinical outcomes in the field of drug discovery and this review strongly recommends that mung bean is an excellent nutritive legume,which modulates or prevents chronic degenerative diseases.
基金financially supported from the National Natural Science Foundation of China(Nos.12074048 and 12147102)the Project for Fundamental and Frontier Research in Chongqing(No.cstc2020jcyj-msxm X0796)the Fundamental Research Funds for the Central Universities(No.2022CDJXY-002)。
文摘The construction of highly active catalysts for methanol oxidation reaction(MOR)is central to direct methanol fuel cells.Tremendous progress has been made in transition metal phosphides(TMPs)based catalysts.However,TMPs would be partially damaged and transformed into new substances(e.g.,Pt-M-P composite,where M represents a second transition metal)during Pt deposition process.This would pose a large obstacle to the cognition of the real promoting effects of TMPs in MOR.Herein,Co_(2)P co-catalysts(Pt-P/Co_(2)P@NPC,where NPC stands for N and P co-doped carbon)and Pt-Co-P composite catalysts(Pt-CoP/NPC)were controllably synthesized.Electrocatalysis tests show that the Pt-Co-P/NPC exhibits superior MOR activity as high as 1016 m A/mg_(Pt),significantly exceeding that of Pt-P/Co_(2)P@NPC(345 m A/mg_(Pt)).This result indicates that the promoting effect is ascribed primarily to the resultant Pt-Co-P composite,in sharply contrast to previous viewpoint that Co_(2)P itself improves the activity.Further mechanistic studies reveal that Pt-Co-P/NPC exhibits much stronger electron interaction and thus manifesting a remarkably weaker CO absorption than Pt-P/Co_(2)P@NPC and Pt/C.Moreover,Pt-Co-P is also more capable of producing oxygen-containing adsorbate and thus accelerating the removal of surface-bonded CO^(*),ultimately boosting the MOR performance.
基金supported by the National Natural Science Foundation of China(20825310 and 20973011)National Basic Research Project of China (2011CB201400 and 2011CB808700)
文摘The effect of chloride ions on a monoclinic ZrO2-supported RuOx （RuOx/m-ZrO2） catalyst with a Ru surface density of 0.3 Ru/nm2 was studied in the selective oxidation of methanol to methyl formate （MF） at a low temperature of 373 K. The m-ZrO2 support was Cl-free, and Cl- ions were introduced into the RuOx/m-ZrO2 catalyst by impregnation with zirconium oxychloride or ammonium chloride and subsequent thermal treatment in air at 673 K. The structures of these catalysts were characterized by X-ray diffraction, Raman and X-ray photoelectron spectroscopies. Their reducibility was probed by temperature-programmed reduction in H2. The RuOx domains were present as highly dispersed Rut42- structure on m-ZrO2 with similar reducibility for the RuOx/m-ZrO2 samples irrespective of modification with or without Cl ions. Introduction of appropriate amounts of zirconium oxychloride into RuOx/m-ZrO2 led to a remarkable increase in the methanol oxidation rate and MF selectivity, whereas introduction of ammonium chloride or zirconyl nitrate significantly inhibited the catalytic performance of RuOx/m-ZrO2. The promoting effect of Cl- ions derived from zirconium oxychloride can be tentatively attributed to their roles in facilitating the adsorption of methanol and desorption of MF product or its intermediates. This finding provides novel insights into the promoting effect of Cl- ions on oxides-based catalysts for selective oxidation reactions.
