Objective:Glycomics is an emerging field in the postgenome and postproteome era.Glycosylation changes of cell-surface have been observed in tumour cell progression and metastasis but difficult to analyze because of a ...Objective:Glycomics is an emerging field in the postgenome and postproteome era.Glycosylation changes of cell-surface have been observed in tumour cell progression and metastasis but difficult to analyze because of a lack of high-throughput and facile technologies.Here we fabricated a lectin microarray with 26 selected lectins for the differential comparison of whole cell glycomes to detect cancer cell-surface glycome.Methods 26 lectins were printed on array,and the cells were extracted from cancer lines and labelled by AO,after incubated on the microarray.展开更多
The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronid...The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronidase,and tyrosinase in relation to its chemical composition.Ultra Performance Liquid Chromatography-Mass Spectrometry(UPLC-MS)identified 27 metabolites(15 flavonoids,8 phenolic acids and their derivatives,and 4 coumarins).ASE showed strong antioxidant capacity in DPPH(IC_(50)value of 26.05μg/mL)and FRAP(2433μM FeSO_(4)/g extract)assays.The extract inhibited MMP-1 and MMP-9 in a concentration-dependent manner and suppressed collagenase,elastase,hyaluronidase,and tyrosinase activities(IC_(50)=35.038,40.748,61.389,and 30.980μg/mL,respectively).A network pharmacology study was conducted to uncover the mechanisms responsible for skin anti-aging effects,and molecular docking further evaluated interactions of key metabolites with hub targets.Twenty-one bioactive metabolites,selected based on oral bioavailability and drug-likeness,highlighted cinnamic acid,acacetin,luteolin,kaempferol,and apigenin as key compounds.MMP-9,ESR1,PTGS-2,and EGFR were identified as main targets.Docking studies revealed that acacetin and apigenin have stronger binding affinities to MMP-9,PTGS-2,and EGFR than other constituents.These findings suggest that ASE may serve as a natural multi-target skin anti-aging remedy with potential cosmetic applications.展开更多
The protein corona formation has been reported to influence the liposomes’behavioral performance in vivo.Accordingly,the effect of physiologically relevant inorganic ion pairs(sodium chloride,sodium sulfate,magnesium...The protein corona formation has been reported to influence the liposomes’behavioral performance in vivo.Accordingly,the effect of physiologically relevant inorganic ion pairs(sodium chloride,sodium sulfate,magnesium chloride,and magnesium sulfate)was investigated.Bovine serum albumin(BSA)was selected as the model protein.Parameters including particle size and zeta potential were assessed,while various spectroscopic techniques were utilized to elucidate the changes in BSA during its interaction with liposomes.The particle size and light intensity distribution changes indicated that the introduction of inorganic pairs,especially the metal cations,could significantly influence both the adsorption of BSA and the aggregation of particles.Furthermore,spectral characterization elucidated that BSA exhibited more extended peptide chains with enhanced exposure to hydrophobic acid amino residues upon adding ion pairs.Electrostatic adsorption and chelation insertion were proposed as metal ion binding modes and the corresponding BSA corona formation.In the electrostatic adsorption mode,sodium ions can enhance the electrostatic interactions,facilitating the“connection”between BSA and liposomes.Magnesium ions can induce stronger hydrophobic interactions through chelation,effectively“drag”BSA segments into the lipid bilayer.This work highlighted important physiological factors for protein-liposome interaction and provided rational model constructions to lay the foundation for further relevant studies.展开更多
Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplor...Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplored.This study identified a genomic region(q NLQ3.1) for head-splitting resistance on chromosome C03 through the combination of QTLseq and GPS analysis in an F_(2) population derived from hybridizing two cabbage inbred lines,‘Dazhengfu'(ZF,susceptible) and ‘103'(resistant).Traditional genetic linkage analysis narrowed q NLQ3.1 to a 74.6 kb region.Furthermore,comparative analysis of the two parental lines using transcriptomic and metabolic profiling demonstrated the crucial role of hormones in regulating head-splitting resistance.Bol028000,encoding a homologue of Arabidopsis Cytokinin Response Factor 3(CRF3),emerged as a promising candidate for head-splitting resistance and was subsequently validated through Sanger sequencing and quantitative RT-PCR(qRT-PCR).Subcellular localisation analysis revealed that Bol028000 was mainly expressed in the nucleus.Additionally,one kompetitive allele-specific PCR(KASP) marker from Bol028000 was developed and utilized to screen 42 inbred lines.These findings enhance the theoretical understanding of head-splitting resistance and provide valuable insights for the molecular breeding of head-splitting resistant cabbages.展开更多
Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differe...Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.展开更多
In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ...In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.展开更多
Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance fo...Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.展开更多
Large-scale proteomics studies can refine our understanding of health and disease and enable precision medicine.Here,we provide a detailed atlas of 2,920 plasma proteins linking to diseases(406 prevalent and 660 incid...Large-scale proteomics studies can refine our understanding of health and disease and enable precision medicine.Here,we provide a detailed atlas of 2,920 plasma proteins linking to diseases(406 prevalent and 660 incident)and 986 health-related traits in 53,026 individuals(median follow-up:14.8 years)from the UK Biobank,representing the most comprehensive proteome profiles to date.This atlas revealed 168,100 protein-disease associations and 554,488 protein-trait associations.展开更多
Male breast cancer(MBC)is rare,representing 0.5%–1%of all breast cancers,but its incidence is increasing due to improved diagnostics and awareness.MBC typically presents in older men,is human epidermal growth factor ...Male breast cancer(MBC)is rare,representing 0.5%–1%of all breast cancers,but its incidence is increasing due to improved diagnostics and awareness.MBC typically presents in older men,is human epidermal growth factor receptor 2(HER2)-negative and estrogen receptor(ER)-positive,and lacks routine screening,leading to delayed diagnosis and advanced disease.Major risk factors include hormonal imbalance,radiation exposure,obesity,alcohol use,and Breast Cancer Gene 1 and 2(BRCA1/2)mutations.Clinically,it may resemble gynecomastia but usually appears as a unilateral,painless mass or nipple discharge.Advances in imaging and liquid biopsy have enhanced early detection.Molecular mechanisms involve hormonal signaling,HER2/epidermal growth factor receptor(EGFR)pathways,tumor suppressor gene alterations,and epigenetic changes.While standard treatments mirror those for female breast cancer,emerging options such as cyclin-dependent kinase 4 and 6(CDK4/6),and poly(ADP-ribose)polymerase(PARP)inhibitors,immunotherapy,and precision medicine are reshaping management.Incorporating artificial intelligence,molecular profiling,and male-specific clinical trials is essential to improve outcomes and bridge current diagnostic and therapeutic gaps.展开更多
In real industrial microgrids(MGs),the length of the primary delivery feeder to the connection point of the main substation is sometimes long.This reduces the power factor and increases reactive power absorption along...In real industrial microgrids(MGs),the length of the primary delivery feeder to the connection point of the main substation is sometimes long.This reduces the power factor and increases reactive power absorption along the primary delivery feeder from the external network.Besides,the giant induction electro-motors as the working horse of industries requires remarkable amounts of reactive power for electro-mechanical energy conversions.To reduce power losses and operating costs of the MG as well as to improve the voltage quality,this study aims at providing an insightful model for optimal placement and sizing of reactive power compensation capacitors in an industrial MG.In the presented model,the objective function considers voltage profile and network power factor improvement at the MG connection point.Also,it realizes power flow equations within which all operational security constraints are considered.Various reactive power compensation strategies including distributed group compensation,centralized compensation at the main substation,and distributed compensation along the primary delivery feeder are scrutinized.A real industrial MG,say as Urmia Petrochemical plant,is considered in numerical validations.The obtained results in each scenario are discussed in depth.As seen,the best performance is obtained when the optimal location and sizing of capacitors are simultaneously determined at the main buses of the industrial plants,at the main substation of the MG,and alongside the primary delivery feeder.In this way,74.81%improvement in power losses reduction,1.3%lower active power import from the main grid,23.5%improvement in power factor,and 37.5%improvement in network voltage deviation summation are seen in this case compared to the base case.展开更多
BACKGROUND Paternal perinatal depression(PPD)is closely associated with maternal mental health challenges,marital strain,and adverse child developmental outcomes.Despite its significant impact,PPD remains under-recogn...BACKGROUND Paternal perinatal depression(PPD)is closely associated with maternal mental health challenges,marital strain,and adverse child developmental outcomes.Despite its significant impact,PPD remains under-recognized in family-centered clinical practice.Concurrently,against the backdrop of rising rates of delayed marriage and China’s Maternity Incentive Policy,the proportion of women giving birth at an advanced maternal age is increasing.Nevertheless,research specifically examining PPD among spouses of older mothers remains critically scarce,both in China and globally.AIM To investigate PPD and its influencing factors in Chinese advanced maternal age families.METHODS This cross-sectional study included 358 participants;it was conducted among fathers of pregnant women of advanced maternal age at five hospitals in the Pearl River Delta region of China from September 2023 to June 2024.Data were collected via a general information questionnaire,the Social Support Rating Scale,and the Edinburgh Postnatal Depression Scale.Latent profile analysis and regression mixture models(RMMs)were adopted to analyze the latent PPD types and factors that influenced PPD.RESULTS The incidence of PPD was 16.48%,and three profiles were identified:Low-symptomatic(175 cases,48.89%),monophasic(140 cases,39.10%),and high-symptomatic(43 cases,12.01%).The RMM analysis revealed that first pregnancy,low income(<¥3000/month),part-time work,and a history of abnormal pregnancy were positively associated with the high-symptomatic type(P<0.05).Conversely,high subjective support and support utilization were negatively associated with the high-symptomatic type compared with the low-symptomatic type(P<0.05).Good couple relationships,high objective and subjective support,and high support utilization were negatively associated with monophasic disorder(P<0.05).CONCLUSION PPD incidence is high among Chinese fathers with advanced maternal age partners,and the characteristics of depression are varied.Healthcare practitioners should prioritize individuals with low levels of social support.展开更多
Spared regions of the damaged central nervous system undergo dynamic remodelling and exhibit a remarkable potential for therapeutic exploitation1.Lesion-remote astrocytes(LRAs),which interact with viable neurons and g...Spared regions of the damaged central nervous system undergo dynamic remodelling and exhibit a remarkable potential for therapeutic exploitation1.Lesion-remote astrocytes(LRAs),which interact with viable neurons and glia,undergo reactive transformations whose molecular and functional properties are poorly understood2.Here,using multiple transcriptional profiling methods,we investigated LRAs from spared regions of mouse spinal cord following traumatic spinal cord injury.展开更多
Synthetic phenolic antioxidants(SPAs)are widely used in diverse industries due to their exceptional antioxidant characteristics.However,human exposure to SPAs may cause health problems.In this study,226 dust samples w...Synthetic phenolic antioxidants(SPAs)are widely used in diverse industries due to their exceptional antioxidant characteristics.However,human exposure to SPAs may cause health problems.In this study,226 dust samples were collected from 10 provinces in China,and six SPAs(three parent SPAs and their three transformation products)were analyzed.The concentrations of6SPAs(the sum of six target compounds)ranged from 15.4 to 3210 ng/g(geometric mean(GM):169 ng/g).The highest concentration of6SPAswas found in Sichuan Province(GM:349 ng/g),which was approximately 4 times higher than that in Hubei Province(81.6 ng/g)(p<0.05).The concentrations of butylated hydroxytoluene(BHT),2,2'-methylene bis(4-methyl-6–tert-butylphenol)(AO2246),2,6-di–tert–butyl–1,4-benzoquinone(BHT-Q),2,6-di–tert–butyl–4-(hydroxymethyl)phenol(BHT-OH),and ∑_(p)-SPAs were substantially higher in dust from urban areas than rural areas(p<0.05).AO2246 concentration in dust from homes(GM:0.400 ng/g)was about 4 times higher than that in workplaces(0.116 ng/g)(p<0.01).Significantly higherp-SPAs concentrations were found in dust from homes(GM:17.5 ng/g)than workplaces(11.4 ng/g)(p<0.01).The estimated daily intakes(EDIs)of ∑_(6)SPAs exposed through dust ingestion were 0.582,0.342,0.197,0.076,and 0.080 ng/kg bw/day in different age groups,and exposed through dermal contact was 0.358,0.252,0.174,0.167,and 0.177 ng/kg bw/day.EDIs showed that the exposure risks of SPAs decreased with age.This is the first work to determine SPAs in dust from10 provinces in China and investigate the spatial distribution of SPAs in those regions.展开更多
Objective:Triple-negative breast cancer(TNBC)is a highly aggressive subtype that lacks targeted therapies,leading to a poorer prognosis.However,some patients achieve long-term recurrence-free survival(RFS),offering va...Objective:Triple-negative breast cancer(TNBC)is a highly aggressive subtype that lacks targeted therapies,leading to a poorer prognosis.However,some patients achieve long-term recurrence-free survival(RFS),offering valuable insights into tumor biology and potential treatment strategies.Methods:We conducted a comprehensive multi-omics analysis of 132 patients with American Joint Committee on Cancer(AJCC)stage III TNBC,comprising 36 long-term survivors(RFS≥8 years),62 moderate-term survivors(RFS:3-8 years),and 34 short-term survivors(RFS<3 years).Analyses investigated clinicopathological factors,whole-exome sequencing,germline mutations,copy number alterations(CNAs),RNA sequences,and metabolomic profiles.Results:Long-term survivors exhibited fewer metastatic regional lymph nodes,along with tumors showing reduced stromal fibrosis and lower Ki67 index.Molecularly,these tumors exhibited multiple alterations in genes related to homologous recombination repair,with higher frequencies of germline mutations and somatic CNAs.Additionally,tumors from long-term survivors demonstrated significant downregulation of the RTK-RAS signaling pathway.Metabolomic profiling revealed decreased levels of lipids and carbohydrate,particularly those involved in glycerophospholipid,fructose,and mannose metabolism,in long-term survival group.Multivariate Cox analysis identified fibrosis[hazard ratio(HR):12.70,95%confidence interval(95%CI):2.19-73.54,P=0.005]and RAC1copy number loss/deletion(HR:0.22,95%CI:0.06-0.83,P=0.026)as independent predictors of RFS.Higher fructose/mannose metabolism was associated with worse overall survival(HR:1.30,95%CI:1.01-1.68,P=0.045).Our findings emphasize the association between biological determinants and prolonged survival in patients with TNBC.Conclusions:Our study systematically identified the key molecular and metabolic features associated with prolonged survival in AJCC stage III TNBC,suggesting potential therapeutic targets to improve patient outcomes.展开更多
Laser twin-arc GTAW(LTA-GTAW)process has been developed by using the synergic interaction effects of laser and a coupled arc in a weld pool to achieve higher energy efficiency.In this study,bead-on-plate welding was c...Laser twin-arc GTAW(LTA-GTAW)process has been developed by using the synergic interaction effects of laser and a coupled arc in a weld pool to achieve higher energy efficiency.In this study,bead-on-plate welding was conducted on 8-mm-thick Q235B work-pieces to investigate the variation of hybrid arc profile,the influence of hybrid arc profile on weld forming,microstructure and mech-anical properties of the joint during the LTA-GTAW process.The influence of Laser-GTAW and LTA-GTAW methods on weld surface appearance,heat input per unit length,and weld metal microstructure were also demonstrated systematically.The LTA-GTAW can make the distribution of arc energy more reasonable in welding depth and width.When defocus is 0,I_(f)is 330 A,I_(b)is 240 A,laser power is 2.4 kW,and spacing between heat sources of tungsten electrode is 10 mm,the weld shape is better.Compared with Laser-GTAW,LTA-GTAW can achieve lower heat input at the same penetration depth,and the microstructure of the weld is refined.The tensile strength of the welded joint is 121.8%of the base material,and the fracture mode of the welded joint is ductile fracture,the comprehensive mechanical properties are better.展开更多
This research aimed to overcome challenges such as high costs,lengthy optimization time,and low efficiency in resolving issues related to wheel-rail contact,rail wear,and vehicle dynamics.Based on the wheel-rail conta...This research aimed to overcome challenges such as high costs,lengthy optimization time,and low efficiency in resolving issues related to wheel-rail contact,rail wear,and vehicle dynamics.Based on the wheel-rail contact parameters,an optimal design method for rail grinding target profile is proposed from wear profile measurement to grinding profile design according to the actual railway track and vehicle operating conditions.We utilized Isight to create a simulation test and developed an RBF proxy model that incorporated both mechanical and geometric aspects of wheel-rail contact.By integrating rail modeling,wheel-rail contact analysis,and multi-objective optimization,we established a rail grinding optimization model that was solved using the NSGA-II algorithm.After optimization,the study achieved a 31.863%reduction in average contact stress,a 70.5%reduction in matching wear work,and a 100.391%increase in the difference in rolling radius between the wheel and rail.展开更多
The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficien...The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.展开更多
In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigatio...In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigation but also monitor the optical power and dispersion profile over multi-span links.The link status information can be extracted by the characteristics of the learned optical fiber parameters without any other measuring instruments.The efficiency and feasibility of this method have been investigated in different fiber link conditions,including various launch power,transmission distance,and the location and the amount of the abnormal losses.A good monitoring performance can be obtained while the launch optical power is 2 dBm which does not affect the normal operation of the optical communication system and the step size of DBP is 20 km which can provide a better distance resolution.This scheme successfully detects the location of single or multiple optical attenuators in long-distance multi-span fiber links,including different abnormal losses of 2 dB,4 dB,and 6 dB in 360 km and serval combinations of abnormal losses of(1 dB,5 dB),(3 dB,3 dB),(5 dB,1 dB)in 360 km and 760 km.Meanwhile,the transfer relationship of the estimated coefficient values with different step sizes is further investigated to reduce the complexity of the fiber nonlinear damage compensation.These results provide an attractive approach for precisely sensing the optical fiber link status information and making correct strategies timely to ensure optical communication system operations.展开更多
CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voir...CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.展开更多
A segmented predictor-corrector method is proposed for hypersonic glide vehicles to address the issue of the slow computational speed of obtaining guidance commands using the traditional predictor-corrector guidance m...A segmented predictor-corrector method is proposed for hypersonic glide vehicles to address the issue of the slow computational speed of obtaining guidance commands using the traditional predictor-corrector guidance method.Firstly,an altitude-energy profile is designed,and the bank angle is derived analytically as the initial iteration value for the predictor-corrector method.The predictor-corrector guidance method has been improved by deriving an analytical form for predicting the range-to-go error,which greatly accelerates the iterative speed.Then,a segmented guidance algorithm is proposed.The above analytically predictor-corrector guidance method is adopted when the energy exceeds an energy threshold.When the energy is less than the threshold,the equidistant test method is used to calculate the bank angle command,which ensures guidance accuracy as well as computational efficiency.Additionally,an adaptive guidance cycle strategy is applied to reduce the computational time of the reentry guidance trajectory.Finally,the accuracy and robustness of the proposed method are verified through a series of simulations and Monte-Carlo experiments.Compared with the traditional integral method,the proposed method requires 75%less computation time on average and achieves a lower landing error.展开更多
基金supported by a grant from the National Natural Science Foundation of China(20672144)
文摘Objective:Glycomics is an emerging field in the postgenome and postproteome era.Glycosylation changes of cell-surface have been observed in tumour cell progression and metastasis but difficult to analyze because of a lack of high-throughput and facile technologies.Here we fabricated a lectin microarray with 26 selected lectins for the differential comparison of whole cell glycomes to detect cancer cell-surface glycome.Methods 26 lectins were printed on array,and the cells were extracted from cancer lines and labelled by AO,after incubated on the microarray.
基金funded by the Deanship of Graduate Studies and Scientific Research at Jouf University under grant No.(DGSSR-2023-01-02126).
文摘The study evaluated the skin anti-aging activity of Astragalus sarcocolla leaves extract(ASE)by assessing its antioxidant and inhibitory effect activity on matrix metalloproteinase(MMP),collagenase,elastase,hyaluronidase,and tyrosinase in relation to its chemical composition.Ultra Performance Liquid Chromatography-Mass Spectrometry(UPLC-MS)identified 27 metabolites(15 flavonoids,8 phenolic acids and their derivatives,and 4 coumarins).ASE showed strong antioxidant capacity in DPPH(IC_(50)value of 26.05μg/mL)and FRAP(2433μM FeSO_(4)/g extract)assays.The extract inhibited MMP-1 and MMP-9 in a concentration-dependent manner and suppressed collagenase,elastase,hyaluronidase,and tyrosinase activities(IC_(50)=35.038,40.748,61.389,and 30.980μg/mL,respectively).A network pharmacology study was conducted to uncover the mechanisms responsible for skin anti-aging effects,and molecular docking further evaluated interactions of key metabolites with hub targets.Twenty-one bioactive metabolites,selected based on oral bioavailability and drug-likeness,highlighted cinnamic acid,acacetin,luteolin,kaempferol,and apigenin as key compounds.MMP-9,ESR1,PTGS-2,and EGFR were identified as main targets.Docking studies revealed that acacetin and apigenin have stronger binding affinities to MMP-9,PTGS-2,and EGFR than other constituents.These findings suggest that ASE may serve as a natural multi-target skin anti-aging remedy with potential cosmetic applications.
基金supported by the National Natural Science Foundation of China(No.82373800)Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011236)Continuation"Project of Excellent Doctors,Guangzhou Basic and Applied Basic Research Foundation(No.2025A04J5082).
文摘The protein corona formation has been reported to influence the liposomes’behavioral performance in vivo.Accordingly,the effect of physiologically relevant inorganic ion pairs(sodium chloride,sodium sulfate,magnesium chloride,and magnesium sulfate)was investigated.Bovine serum albumin(BSA)was selected as the model protein.Parameters including particle size and zeta potential were assessed,while various spectroscopic techniques were utilized to elucidate the changes in BSA during its interaction with liposomes.The particle size and light intensity distribution changes indicated that the introduction of inorganic pairs,especially the metal cations,could significantly influence both the adsorption of BSA and the aggregation of particles.Furthermore,spectral characterization elucidated that BSA exhibited more extended peptide chains with enhanced exposure to hydrophobic acid amino residues upon adding ion pairs.Electrostatic adsorption and chelation insertion were proposed as metal ion binding modes and the corresponding BSA corona formation.In the electrostatic adsorption mode,sodium ions can enhance the electrostatic interactions,facilitating the“connection”between BSA and liposomes.Magnesium ions can induce stronger hydrophobic interactions through chelation,effectively“drag”BSA segments into the lipid bilayer.This work highlighted important physiological factors for protein-liposome interaction and provided rational model constructions to lay the foundation for further relevant studies.
基金funded by the Agricultural Development Program through Science and Technology of Shanghai,China (2022-02-08-00-12-F01099)the National Key R&D Program of China (2023YFD1201501)+1 种基金the Science and Technology Commission of Shanghai Municipality,China (22DX1900100)the Excellent Team Project of Shanghai Academy of Agricultural Sciences,China (2022(007))。
文摘Head-splitting is a prevalent physiological disorder in cabbage that causes substantial economic losses.However,the genetic factors and molecular mechanisms underlying head-splitting resistance remain largely unexplored.This study identified a genomic region(q NLQ3.1) for head-splitting resistance on chromosome C03 through the combination of QTLseq and GPS analysis in an F_(2) population derived from hybridizing two cabbage inbred lines,‘Dazhengfu'(ZF,susceptible) and ‘103'(resistant).Traditional genetic linkage analysis narrowed q NLQ3.1 to a 74.6 kb region.Furthermore,comparative analysis of the two parental lines using transcriptomic and metabolic profiling demonstrated the crucial role of hormones in regulating head-splitting resistance.Bol028000,encoding a homologue of Arabidopsis Cytokinin Response Factor 3(CRF3),emerged as a promising candidate for head-splitting resistance and was subsequently validated through Sanger sequencing and quantitative RT-PCR(qRT-PCR).Subcellular localisation analysis revealed that Bol028000 was mainly expressed in the nucleus.Additionally,one kompetitive allele-specific PCR(KASP) marker from Bol028000 was developed and utilized to screen 42 inbred lines.These findings enhance the theoretical understanding of head-splitting resistance and provide valuable insights for the molecular breeding of head-splitting resistant cabbages.
基金supported by the Major Planning Project of Philosophy and Social Science of Guangdong Province(GD23ZD17)the Humanities and Social Sciences Program of the Ministry of Education(23YJA190006)+3 种基金the Ministry of Education(MOE)Major Project of Philosophy and Social Sciences Research(2025JZDZ024)the MOE Project of the Key Research Institute of Humanities and Social Sciences in Universities(22JJD190008)a grant from the Research Center for Brain Cognition and Human Development of Guangdong(2024B0303390003)the Psychological Services and Counseling Base for the Happy Guangzhou Project.
文摘Background:Exposure to environmental vulnerability poses significant threats to adolescent suicidal ideation,while individual resilience can mitigate these adverse effects with notable gender commonalities and differences.However,research examining how these factors co-configure at the individual level remains limited,particularly from a gender-specific perspective.Thus,the present study aims to adopt a person-centered analytic approach to identify gender-specific configurations of environmental vulnerability and individual resilience associated with suicidal ideation among Chinese adolescents.Methods:Data were collected from 2616 Chinese primary and secondary school students(aged 10–17;1223 girls).Participants completed validated scales measuring environmental vulnerability,individual resilience,and suicidal ideation.Latent profile analysis(LPA)was conducted separately by gender.Results:Gender differences were prominent:males exhibited higher resilience and lower suicidal ideation,while females reported higher environmental vulnerability and elevated levels of suicidal ideation.LPA identified three distinct profiles for males:Low Vulnerable–High Protective–Low Risk(LHL),Medium Vulnerable–Low Protective–Low Risk(MLL),and High Vulnerable–Low Protective–High Risk(HLH).Four profiles emerged for females:LHL,MLL,Medium Vulnerable–Low Protective–Medium Risk(MLM),and HLH.Crucially,within the HLH profile,males exhibited particularly deficient humor(η^(2)=0.19)and confidence(η^(2)=0.16),while females formed a distinct subgroup characterized by severe academic and family stressors(η^(2)=0.30–0.36).Conclusion:The study underscores developing gender-specific mental health interventions using a nuanced,person-centered approach that considers both environmental risk and individual resilience factors,which allows for targeted suicide prevention strategies addressing the unique needs of male and female adolescents.
文摘In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.
基金supported by the National Key Research and Development Program of China(No.2022YFE0201800)the National Natural Science Foundation of China(Nos.22274169 and 22474161)+5 种基金Guangdong Basic and Applied Basic Research Foundation(No.2024A1515030160)the Science and Technology Program of Guangzhou City(No.2023B03J1380)Shenzhen Science and Technology Innovation Commission(No.GJHZ20210705142200001)the Scientific Technology Project of Guangzhou City(No.202103000003)the Guangdong Science and Technology Plan Project(No.2020B1212060077)the Open Research Fund of State Key Laboratory of Analytical Chemistry for Life Science,School of Chemistry and Chemical Engineering,Nanjing University.
文摘Small extracellular vesicles(sEVs)membrane protein profile(sEVpp)is a novel biomarker for cancer,and it can reveal the in-depth phenotype information.The point-of-care testing(POCT)of sEVpp holds great significance for mass screening of cancer,so the cost-effective and simple detection methods of sEVpp are urgently demanded.Herein,we constructed a paper-based multichannel sEVpp POCT device(sEVpp-PAD)enabled by functional DNA probes and metal-organic framework(MOF).The core components are aptamer/MOF-modified paper chips.The modified aptamers can immunocapture the sEV expressing corresponding proteins,while the modified MOF can provide abundant sites for aptamer-modification,reduce the nonspecific protein absorption,and act as reference for ratiometric detection.Simply powered by two syringes,the sEVpp-PAD can efficiently capture sEVs expressing corresponding protein from cell culture media and sera.Furthermore,a detection probe(DP)consisted of CD63 aptamer and G-quadruplex was developed for the colorimetric detection of captured sEVs.Utilizing this device,the sEVpp in various hepatocellular carcinoma cell culture medium and,more importantly,in human sera can be accurately determined,only with$2 device,$0.2 detection reagents and 1.8 h procedure.This simple strategy for sEVpp detection can innovatively promote the POCT and subtyping of cancer based on sEV-related liquid biopsy.
文摘Large-scale proteomics studies can refine our understanding of health and disease and enable precision medicine.Here,we provide a detailed atlas of 2,920 plasma proteins linking to diseases(406 prevalent and 660 incident)and 986 health-related traits in 53,026 individuals(median follow-up:14.8 years)from the UK Biobank,representing the most comprehensive proteome profiles to date.This atlas revealed 168,100 protein-disease associations and 554,488 protein-trait associations.
文摘Male breast cancer(MBC)is rare,representing 0.5%–1%of all breast cancers,but its incidence is increasing due to improved diagnostics and awareness.MBC typically presents in older men,is human epidermal growth factor receptor 2(HER2)-negative and estrogen receptor(ER)-positive,and lacks routine screening,leading to delayed diagnosis and advanced disease.Major risk factors include hormonal imbalance,radiation exposure,obesity,alcohol use,and Breast Cancer Gene 1 and 2(BRCA1/2)mutations.Clinically,it may resemble gynecomastia but usually appears as a unilateral,painless mass or nipple discharge.Advances in imaging and liquid biopsy have enhanced early detection.Molecular mechanisms involve hormonal signaling,HER2/epidermal growth factor receptor(EGFR)pathways,tumor suppressor gene alterations,and epigenetic changes.While standard treatments mirror those for female breast cancer,emerging options such as cyclin-dependent kinase 4 and 6(CDK4/6),and poly(ADP-ribose)polymerase(PARP)inhibitors,immunotherapy,and precision medicine are reshaping management.Incorporating artificial intelligence,molecular profiling,and male-specific clinical trials is essential to improve outcomes and bridge current diagnostic and therapeutic gaps.
文摘In real industrial microgrids(MGs),the length of the primary delivery feeder to the connection point of the main substation is sometimes long.This reduces the power factor and increases reactive power absorption along the primary delivery feeder from the external network.Besides,the giant induction electro-motors as the working horse of industries requires remarkable amounts of reactive power for electro-mechanical energy conversions.To reduce power losses and operating costs of the MG as well as to improve the voltage quality,this study aims at providing an insightful model for optimal placement and sizing of reactive power compensation capacitors in an industrial MG.In the presented model,the objective function considers voltage profile and network power factor improvement at the MG connection point.Also,it realizes power flow equations within which all operational security constraints are considered.Various reactive power compensation strategies including distributed group compensation,centralized compensation at the main substation,and distributed compensation along the primary delivery feeder are scrutinized.A real industrial MG,say as Urmia Petrochemical plant,is considered in numerical validations.The obtained results in each scenario are discussed in depth.As seen,the best performance is obtained when the optimal location and sizing of capacitors are simultaneously determined at the main buses of the industrial plants,at the main substation of the MG,and alongside the primary delivery feeder.In this way,74.81%improvement in power losses reduction,1.3%lower active power import from the main grid,23.5%improvement in power factor,and 37.5%improvement in network voltage deviation summation are seen in this case compared to the base case.
基金Supported by High-level Professional Groups in Gangdong Province,No.GSPZYQ2020101Guangdong Province Educational Research Planning Project,No.2024GXJK742。
文摘BACKGROUND Paternal perinatal depression(PPD)is closely associated with maternal mental health challenges,marital strain,and adverse child developmental outcomes.Despite its significant impact,PPD remains under-recognized in family-centered clinical practice.Concurrently,against the backdrop of rising rates of delayed marriage and China’s Maternity Incentive Policy,the proportion of women giving birth at an advanced maternal age is increasing.Nevertheless,research specifically examining PPD among spouses of older mothers remains critically scarce,both in China and globally.AIM To investigate PPD and its influencing factors in Chinese advanced maternal age families.METHODS This cross-sectional study included 358 participants;it was conducted among fathers of pregnant women of advanced maternal age at five hospitals in the Pearl River Delta region of China from September 2023 to June 2024.Data were collected via a general information questionnaire,the Social Support Rating Scale,and the Edinburgh Postnatal Depression Scale.Latent profile analysis and regression mixture models(RMMs)were adopted to analyze the latent PPD types and factors that influenced PPD.RESULTS The incidence of PPD was 16.48%,and three profiles were identified:Low-symptomatic(175 cases,48.89%),monophasic(140 cases,39.10%),and high-symptomatic(43 cases,12.01%).The RMM analysis revealed that first pregnancy,low income(<¥3000/month),part-time work,and a history of abnormal pregnancy were positively associated with the high-symptomatic type(P<0.05).Conversely,high subjective support and support utilization were negatively associated with the high-symptomatic type compared with the low-symptomatic type(P<0.05).Good couple relationships,high objective and subjective support,and high support utilization were negatively associated with monophasic disorder(P<0.05).CONCLUSION PPD incidence is high among Chinese fathers with advanced maternal age partners,and the characteristics of depression are varied.Healthcare practitioners should prioritize individuals with low levels of social support.
文摘Spared regions of the damaged central nervous system undergo dynamic remodelling and exhibit a remarkable potential for therapeutic exploitation1.Lesion-remote astrocytes(LRAs),which interact with viable neurons and glia,undergo reactive transformations whose molecular and functional properties are poorly understood2.Here,using multiple transcriptional profiling methods,we investigated LRAs from spared regions of mouse spinal cord following traumatic spinal cord injury.
基金supported by the National Key Research and Development Program of China(No.2023YFC3706602)the National Natural Science Foundation of China(Nos.22225605 and 22193051)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0750200).
文摘Synthetic phenolic antioxidants(SPAs)are widely used in diverse industries due to their exceptional antioxidant characteristics.However,human exposure to SPAs may cause health problems.In this study,226 dust samples were collected from 10 provinces in China,and six SPAs(three parent SPAs and their three transformation products)were analyzed.The concentrations of6SPAs(the sum of six target compounds)ranged from 15.4 to 3210 ng/g(geometric mean(GM):169 ng/g).The highest concentration of6SPAswas found in Sichuan Province(GM:349 ng/g),which was approximately 4 times higher than that in Hubei Province(81.6 ng/g)(p<0.05).The concentrations of butylated hydroxytoluene(BHT),2,2'-methylene bis(4-methyl-6–tert-butylphenol)(AO2246),2,6-di–tert–butyl–1,4-benzoquinone(BHT-Q),2,6-di–tert–butyl–4-(hydroxymethyl)phenol(BHT-OH),and ∑_(p)-SPAs were substantially higher in dust from urban areas than rural areas(p<0.05).AO2246 concentration in dust from homes(GM:0.400 ng/g)was about 4 times higher than that in workplaces(0.116 ng/g)(p<0.01).Significantly higherp-SPAs concentrations were found in dust from homes(GM:17.5 ng/g)than workplaces(11.4 ng/g)(p<0.01).The estimated daily intakes(EDIs)of ∑_(6)SPAs exposed through dust ingestion were 0.582,0.342,0.197,0.076,and 0.080 ng/kg bw/day in different age groups,and exposed through dermal contact was 0.358,0.252,0.174,0.167,and 0.177 ng/kg bw/day.EDIs showed that the exposure risks of SPAs decreased with age.This is the first work to determine SPAs in dust from10 provinces in China and investigate the spatial distribution of SPAs in those regions.
基金supported by grants from the Medical Engineering Jiont Fund of the Fudan University(No.IDH2310117)。
文摘Objective:Triple-negative breast cancer(TNBC)is a highly aggressive subtype that lacks targeted therapies,leading to a poorer prognosis.However,some patients achieve long-term recurrence-free survival(RFS),offering valuable insights into tumor biology and potential treatment strategies.Methods:We conducted a comprehensive multi-omics analysis of 132 patients with American Joint Committee on Cancer(AJCC)stage III TNBC,comprising 36 long-term survivors(RFS≥8 years),62 moderate-term survivors(RFS:3-8 years),and 34 short-term survivors(RFS<3 years).Analyses investigated clinicopathological factors,whole-exome sequencing,germline mutations,copy number alterations(CNAs),RNA sequences,and metabolomic profiles.Results:Long-term survivors exhibited fewer metastatic regional lymph nodes,along with tumors showing reduced stromal fibrosis and lower Ki67 index.Molecularly,these tumors exhibited multiple alterations in genes related to homologous recombination repair,with higher frequencies of germline mutations and somatic CNAs.Additionally,tumors from long-term survivors demonstrated significant downregulation of the RTK-RAS signaling pathway.Metabolomic profiling revealed decreased levels of lipids and carbohydrate,particularly those involved in glycerophospholipid,fructose,and mannose metabolism,in long-term survival group.Multivariate Cox analysis identified fibrosis[hazard ratio(HR):12.70,95%confidence interval(95%CI):2.19-73.54,P=0.005]and RAC1copy number loss/deletion(HR:0.22,95%CI:0.06-0.83,P=0.026)as independent predictors of RFS.Higher fructose/mannose metabolism was associated with worse overall survival(HR:1.30,95%CI:1.01-1.68,P=0.045).Our findings emphasize the association between biological determinants and prolonged survival in patients with TNBC.Conclusions:Our study systematically identified the key molecular and metabolic features associated with prolonged survival in AJCC stage III TNBC,suggesting potential therapeutic targets to improve patient outcomes.
基金supported by the Industrial Innovation Major Technology Global Unveiling Project of Jining City(2022JBZP004)Taishan Scholars Project.
文摘Laser twin-arc GTAW(LTA-GTAW)process has been developed by using the synergic interaction effects of laser and a coupled arc in a weld pool to achieve higher energy efficiency.In this study,bead-on-plate welding was conducted on 8-mm-thick Q235B work-pieces to investigate the variation of hybrid arc profile,the influence of hybrid arc profile on weld forming,microstructure and mech-anical properties of the joint during the LTA-GTAW process.The influence of Laser-GTAW and LTA-GTAW methods on weld surface appearance,heat input per unit length,and weld metal microstructure were also demonstrated systematically.The LTA-GTAW can make the distribution of arc energy more reasonable in welding depth and width.When defocus is 0,I_(f)is 330 A,I_(b)is 240 A,laser power is 2.4 kW,and spacing between heat sources of tungsten electrode is 10 mm,the weld shape is better.Compared with Laser-GTAW,LTA-GTAW can achieve lower heat input at the same penetration depth,and the microstructure of the weld is refined.The tensile strength of the welded joint is 121.8%of the base material,and the fracture mode of the welded joint is ductile fracture,the comprehensive mechanical properties are better.
基金Supported by Fundamental Research Funds for the Central Universities(Grant No.2019JBM050).
文摘This research aimed to overcome challenges such as high costs,lengthy optimization time,and low efficiency in resolving issues related to wheel-rail contact,rail wear,and vehicle dynamics.Based on the wheel-rail contact parameters,an optimal design method for rail grinding target profile is proposed from wear profile measurement to grinding profile design according to the actual railway track and vehicle operating conditions.We utilized Isight to create a simulation test and developed an RBF proxy model that incorporated both mechanical and geometric aspects of wheel-rail contact.By integrating rail modeling,wheel-rail contact analysis,and multi-objective optimization,we established a rail grinding optimization model that was solved using the NSGA-II algorithm.After optimization,the study achieved a 31.863%reduction in average contact stress,a 70.5%reduction in matching wear work,and a 100.391%increase in the difference in rolling radius between the wheel and rail.
基金the National Natural Science Foundation of China(No.52275378)the National Key Laboratory for Precision Hot Processing of Metals(6142909200208)。
文摘The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.
基金supported by the National Key Research and Development Program of China (2019YFB1803905)the National Natural Science Foundation of China (No.62171022)+2 种基金Beijing Natural Science Foundation (4222009)Guangdong Basic and Applied Basic Research Foundation (2021B1515120057)the Scientific and Technological Innovation Foundation of Shunde Graduate School,USTB (No.BK19AF005)。
文摘In this paper,a double-effect DNN-based Digital Back-Propagation(DBP)scheme is proposed and studied to achieve the Integrated Communication and Sensing(ICS)ability,which can not only realize nonlinear damage mitigation but also monitor the optical power and dispersion profile over multi-span links.The link status information can be extracted by the characteristics of the learned optical fiber parameters without any other measuring instruments.The efficiency and feasibility of this method have been investigated in different fiber link conditions,including various launch power,transmission distance,and the location and the amount of the abnormal losses.A good monitoring performance can be obtained while the launch optical power is 2 dBm which does not affect the normal operation of the optical communication system and the step size of DBP is 20 km which can provide a better distance resolution.This scheme successfully detects the location of single or multiple optical attenuators in long-distance multi-span fiber links,including different abnormal losses of 2 dB,4 dB,and 6 dB in 360 km and serval combinations of abnormal losses of(1 dB,5 dB),(3 dB,3 dB),(5 dB,1 dB)in 360 km and 760 km.Meanwhile,the transfer relationship of the estimated coefficient values with different step sizes is further investigated to reduce the complexity of the fiber nonlinear damage compensation.These results provide an attractive approach for precisely sensing the optical fiber link status information and making correct strategies timely to ensure optical communication system operations.
基金Lin Du acknowledges the financial support provided by China Scholarship Council(CSC)via a Ph.D.Scholarship(202008510128)supported by Core Technology Project of China National Petroleum Corporation(CNPC)"Research on Thermal Miscible Flooding Technology"(2023ZG18)。
文摘CO_(2)-responsive gels,which swell upon contact with CO_(2),are widely used for profile control to plug high-permeability gas flow channels in carbon capture,utilization,and storage(CCUS)applications in oil reser-voirs.However,the use of these gels in high-temperature CCUS applications is limited due to their rever-sible swelling behavior at elevated temperatures.In this study,a novel dispersed particle gel(DPG)suspension is developed for high-temperature profile control in CCUS applications.First,we synthesize a double-network hydrogel consisting of a crosslinked polyacrylamide(PAAm)network and a crosslinked sodium alginate(SA)network.The hydrogel is then sheared in water to form a pre-prepared DPG suspen-sion.To enhance its performance,the gel particles are modified by introducing potassium methylsilan-etriolate(PMS)upon CO_(2) exposure.Comparing the particle size distributions of the modified and pre-prepared DPG suspension reveals a significant swelling of gel particles,over twice their original size.Moreover,subjecting the new DPG suspension to a 100℃ environment for 24 h demonstrates that its gel particle sizes do not decrease,confirming irreversible swelling,which is a significant advantage over the traditional CO_(2)-responsive gels.Thermogravimetric analysis further indicates improved thermal sta-bility compared to the pre-prepared DPG particles.Core flooding experiments show that the new DPG suspension achieves a high plugging efficiency of 95.3%in plugging an ultra-high permeability sandpack,whereas the pre-prepared DPG suspension achieves only 82.8%.With its high swelling ratio,irreversible swelling at high temperatures,enhanced thermal stability,and superior plugging performance,the newly developed DPG suspension in this work presents a highly promising solution for profile control in high-temperature CCUS applications.
基金National Natural Science Foundation of China(Nos.61773387 and 62022061).
文摘A segmented predictor-corrector method is proposed for hypersonic glide vehicles to address the issue of the slow computational speed of obtaining guidance commands using the traditional predictor-corrector guidance method.Firstly,an altitude-energy profile is designed,and the bank angle is derived analytically as the initial iteration value for the predictor-corrector method.The predictor-corrector guidance method has been improved by deriving an analytical form for predicting the range-to-go error,which greatly accelerates the iterative speed.Then,a segmented guidance algorithm is proposed.The above analytically predictor-corrector guidance method is adopted when the energy exceeds an energy threshold.When the energy is less than the threshold,the equidistant test method is used to calculate the bank angle command,which ensures guidance accuracy as well as computational efficiency.Additionally,an adaptive guidance cycle strategy is applied to reduce the computational time of the reentry guidance trajectory.Finally,the accuracy and robustness of the proposed method are verified through a series of simulations and Monte-Carlo experiments.Compared with the traditional integral method,the proposed method requires 75%less computation time on average and achieves a lower landing error.
