Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network act...Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.展开更多
In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment techni...In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.展开更多
Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at dif...Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at different strain rates and temperatures,and an optimal superplastic elongation of 634%was achieved at 700℃ and 3×10^(-4)/s.An annealing treatment at 650℃ for 60 min showed a mi-crostructure withαprecipitates distributed in theβmatrix in the friction stir specimen.Such pre-heat treatment improves the superplasticity of the specimen,achieving an elongation of up to 807%at 750℃ and 3×10^(-4)/s.The influences of tensile temperatures and strain rates on the microstructural evolution,such as grain size variation,grain morphology,and phase transformations,were discussed.The super-plastic deformation behavior of fine-grained Ti-10V-2Fe-3Al alloy is controlled by grain boundary sliding and accompanied by dynamic phase transformation and recrystallization.展开更多
Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties...Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The hot deformation characteristics of induction quenched Zr-Sn-Nb-Fe-Cr alloy forged rod in the temperature range of 600–900°C and strain rate range of 0.001–1 s^(-1)were studied by Gleeble3800 uniaxial hot co...The hot deformation characteristics of induction quenched Zr-Sn-Nb-Fe-Cr alloy forged rod in the temperature range of 600–900°C and strain rate range of 0.001–1 s^(-1)were studied by Gleeble3800 uniaxial hot compression experiment.The results show that the flow stress decreases with the decrease in strain rate and the increase in deformation temperature in the true stress-true strain curve of Zr-Sn-Nb-Fe-Cr alloy forged rod.Moreover,the hot deformation characteristics of the material can be described by the hyperbolic sine constitutive equation.Under the experimental conditions,the average thermal activation energy(Q)of the alloy was 412.9105 kJ/mol.The microstructure analysis of the processing map and the sample after hot compression shows that the optimum hot working parameters of the alloy are 795–900°C,0.001–0.0068 s^(-1),at the deformation temperature of 600–900°C,and the strain rate of 0.001–1 s^(-1).展开更多
Agricultural Products Processing and Storage (ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature) is an international,pect-review ed open access journal with the a...Agricultural Products Processing and Storage (ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature) is an international,pect-review ed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additio nally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Using a Gleeble 3500 thermomechanical simulation testing machine,the hot deformation characteristics of 23Cr-8Ni steel were investigated under the conditions of 1000–1250℃ and 0.001‒10 s^(−1).Furthermore,the microst...Using a Gleeble 3500 thermomechanical simulation testing machine,the hot deformation characteristics of 23Cr-8Ni steel were investigated under the conditions of 1000–1250℃ and 0.001‒10 s^(−1).Furthermore,the microstructure of the characterization region was analyzed to investigate the recrystallization behavior of 23Cr-8Ni steel.Results show that as the strain rate decreases and the deformation temperature increases,the flow stress decreases.Because the softening phenomenon occurs after the peak stress,the flow stress decreases.The stress index(n)is 4.28,and the thermal deformation activation energy(Q)is 588878 J/mol.Processing map is established,and an optimal thermal processing range of 0.001–0.1 s^(−1) and 1000–1200℃ is achieved,therefore greatly promoting the yield rate.展开更多
DeepSeek Chinese artificial intelligence(AI)open-source model,has gained a lot of attention due to its economical training and efficient inference.DeepSeek,a model trained on large-scale reinforcement learning without...DeepSeek Chinese artificial intelligence(AI)open-source model,has gained a lot of attention due to its economical training and efficient inference.DeepSeek,a model trained on large-scale reinforcement learning without supervised fine-tuning as a preliminary step,demonstrates remarkable reasoning capabilities of performing a wide range of tasks.DeepSeek is a prominent AI-driven chatbot that assists individuals in learning and enhances responses by generating insightful solutions to inquiries.Users possess divergent viewpoints regarding advanced models like DeepSeek,posting both their merits and shortcomings across several social media platforms.This research presents a new framework for predicting public sentiment to evaluate perceptions of DeepSeek.To transform the unstructured data into a suitable manner,we initially collect DeepSeek-related tweets from Twitter and subsequently implement various preprocessing methods.Subsequently,we annotated the tweets utilizing the Valence Aware Dictionary and sentiment Reasoning(VADER)methodology and the lexicon-driven TextBlob.Next,we classified the attitudes obtained from the purified data utilizing the proposed hybrid model.The proposed hybrid model consists of long-term,shortterm memory(LSTM)and bidirectional gated recurrent units(BiGRU).To strengthen it,we include multi-head attention,regularizer activation,and dropout units to enhance performance.Topic modeling employing KMeans clustering and Latent Dirichlet Allocation(LDA),was utilized to analyze public behavior concerning DeepSeek.The perceptions demonstrate that 82.5%of the people are positive,15.2%negative,and 2.3%neutral using TextBlob,and 82.8%positive,16.1%negative,and 1.2%neutral using the VADER analysis.The slight difference in results ensures that both analyses concur with their overall perceptions and may have distinct views of language peculiarities.The results indicate that the proposed model surpassed previous state-of-the-art approaches.展开更多
Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 31...Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 316L stainless steel were investigated by optimizing a DLP-compatible metal slurry formulation and sintering process.A photosensitive resin system(mass ratio of 5:1:2:2 for U600,LA,ACMO,and HDDA,respectively)with 88 wt%solid content is designed to achieve a slurry with balanced rheology,photocurability,and low pyrolysis residue.Compared to vacuum sintering,which leads to brittle fracture of material,the Ar/H2 mixed gas(5%H2)effectively reduces carbon and oxygen impurities via reduction,mitigating carbide and oxide segregation at grain boundaries and within grains,thereby enhancing strength-ductility.In addition,the prolonged high-temperature sintering inducesδ-ferrite precipitation at grain boundaries,which fills residual pores to improve densification obviously.Under optimized sintering conditions(Ar/H2,1380°C,6 h),the material achieves 96.2%relative density with tensile strength and fracture elongation of 543.5 MPa and 58.7%,respectively,exhibiting uniform dimple-dominated fracture morphology.This synergistic optimization of the slurry formulation and sintering parameters improves the strength-ductility balance in DLP-fabricated metal materials,offering theoretical and technical insights for the additive manufacturing of complex high-performance metal components.展开更多
Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing ...Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.展开更多
The increasing frequency and severity of natural disasters,exacerbated by global warming,necessitate novel solutions to strengthen the resilience of Critical Infrastructure Systems(CISs).Recent research reveals the si...The increasing frequency and severity of natural disasters,exacerbated by global warming,necessitate novel solutions to strengthen the resilience of Critical Infrastructure Systems(CISs).Recent research reveals the sig-nificant potential of natural language processing(NLP)to analyze unstructured human language during disasters,thereby facilitating the uncovering of disruptions and providing situational awareness supporting various aspects of resilience regarding CISs.Despite this potential,few studies have systematically mapped the global research on NLP applications with respect to supporting various aspects of resilience of CISs.This paper contributes to the body of knowledge by presenting a review of current knowledge using the scientometric review technique.Using 231 bibliographic records from the Scopus and Web of Science core collections,we identify five key research areas where researchers have used NLP to support the resilience of CISs during natural disasters,including sentiment analysis,crisis informatics,data and knowledge visualization,disaster impacts,and content analysis.Furthermore,we map the utility of NLP in the identified research focus with respect to four aspects of resilience(i.e.,preparedness,absorption,recovery,and adaptability)and present various common techniques used and potential future research directions.This review highlights that NLP has the potential to become a supplementary data source to support the resilience of CISs.The results of this study serve as an introductory-level guide designed to help scholars and practitioners unlock the potential of NLP for strengthening the resilience of CISs against natural disasters.展开更多
This critical review looks at the assessment of the application of artificial intelligence in handling legal documents with specific reference to medical negligence cases with a view of identifying its transformative ...This critical review looks at the assessment of the application of artificial intelligence in handling legal documents with specific reference to medical negligence cases with a view of identifying its transformative potentialities, issues and ethical concerns. The review consolidates findings that show the impact of AI in improving the efficiency, accuracy and justice delivery in the legal profession. The studies show increased efficiency in speed of document review and enhancement of the accuracy of the reviewed documents, with time efficiency estimates of 60% reduction of time. However, the review also outlines some of the problems that continue to characterize AI, such as data quality problems, biased algorithms and the problem of the opaque decision-making system. This paper assesses ethical issues related to patient autonomy, justice and non-malignant suffering, with particular focus on patient privacy and fair process, and on potential unfairness to patients. This paper’s review of AI innovations finds that regulations lag behind AI developments, leading to unsettled issues regarding legal responsibility for AI and user control over AI-generated results and findings in legal proceedings. Some of the future avenues that are presented in the study are the future of XAI for legal purposes, utilizing federated learning for resolving privacy issues, and the need to foster adaptive regulation. Finally, the review advocates for Legal Subject Matter Experts to collaborate with legal informatics experts, ethicists, and policy makers to develop the best solutions to implement AI in medical negligence claims. It reasons that there is great potential for AI to have a deep impact on the practice of law but when done, it must do so in a way that respects justice and on the Rights of Individuals.展开更多
Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical...Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical implants.This study investigates the enhancement of mechanical properties through the implementation of multiple pass CFP(MP-CFP)in comparison to the conventional single pass CFP.The results reveal a substantial improvement in compressive yield strength(CYS),ultimate compressive strength,and failure plastic strain by 11%,28%,and 66%,respectively.A comprehensive analysis of material evolution during processing and the effects of the final microstructure on mechanical properties was conducted.The intricate material flow behavior during the final plunge stage of MP-CFP results in a reduced intensity of local basal texture and macrotexture.The diminished intensity of basal texture,combined with a low geometrical compatibility factor at the top of the rod after MP-CFP,effectively impedes slip transfer across grain boundaries.This leads to a local strain gradient along the compression direction,ultimately contributing to the observed enhancement in mechanical properties.The Mg-0.5Zn0.3Ca(wt.%)alloy,after texture modification by MP-CFP,exhibits a competitive CYS compared with other traditional methods,highlighting the promising application potential of MP-CFP.展开更多
Background The diverse types and processing methods of grains intricately influence the sites and digestibility of starch digestion,thereby impacting energy utilization.This study aimed to explore the impact of grain ...Background The diverse types and processing methods of grains intricately influence the sites and digestibility of starch digestion,thereby impacting energy utilization.This study aimed to explore the impact of grain variety and processing methods on the net energy(NE)in dairy goats,analyzing these effects at the level of nutrient digestion and metabolism.Methods Eighteen castrated Guanzhong dairy goats(44.25±3.59 kg BW)were randomly divided into 3 groups,each consisting of 6 replicates.The substitution method was employed to determine the NE values of the dry-rolled corn(DRC),dry-rolled wheat(DRW)or steam-flaked corn(SFC,360 g/L).Briefly,two phases were performed.Throughout the basal phase,all goats were fed the same basal diet.In the substitution phase,30%of the basal diet was replaced with DRC,DRW and SFC,respectively.Results In this study,the NE values of the DRC,DRW and SFC were 7.65,7.54 and 7.44 MJ/kg DM,respectively.Compared to the DRC group,the DRW group showed increased digestibility of starch and crude protein(CP).Similarly,the SFC group exhibited increased organic matter(OM)and starch digestibility and a trend towards higher dry matter(DM)digestibility,reduced fecal OM and starch content.Additionally,fecal volatile fatty acid(VFA)concentrations decreased in goats fed SFC.Correspondingly,digestible energy(DE)in the DRW and SFC groups tended to be higher than in the DRC group.DRW increased total VFA concentration compared to DRC,while SFC increased the proportion of propionate and decreased the acetate-to-propionate ratio in the rumen.Both the DRW and SFC diets elevated serum glucose levels.Furthermore,heat increment(HI)and gaseous energy(Gas E)related to fermentation were significantly higher in the DRW and SFC groups compared to the DRC group.Conclusion Our findings indicated that DRW and SFC increased rumen starch fermentation in goats,thereby improving total tract starch digestion and DE.However,DRW and SFC failed to improve NE value due to increased heat and gas energy production from fermentation.Therefore,excessively refined grains processing in the diet of dairy goats does not effectively improve energy efficiency.展开更多
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金Technology Development Program of Jilin Province(YDZJ202201ZYTS640)the National Key Research and Development Program of China(2022YFB4200400)funded by MOST+4 种基金the National Natural Science Foundation of China(52172048 and 52103221)Shandong Provincial Natural Science Foundation(ZR2021QB024 and ZR2021ZD06)Guangdong Basic and Applied Basic Research Foundation(2023A1515012323,2023A1515010943,and 2024A1515010023)the Qingdao New Energy Shandong Laboratory open Project(QNESL OP 202309)the Fundamental Research Funds of Shandong University.
文摘Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.
基金supported by the Major Science and Technology Project of Zhongshan City(No.2022AJ004)the Key Basic and Applied Research Program of Guangdong Province(Nos.2019B030302010 and 2022B1515120082)Guangdong Science and Technology Innovation Project(No.2021TX06C111).
文摘In general,the rapid growth of α-Fe clusters is a challenge in high Fe-content Fe-based amorphous alloys,negatively affecting their physical properties.Herein,we introduce an efficient and rapid post-treatment technique known as ultrasonic vibration rapid processing(UVRP),which enables the formation of high-density strong magnetic α-Fe clusters,thereby enhancing the soft magnetic properties of Fe_(78)Si(13)B_(9) amorphous alloy ribbon.
基金financially supported by the National Natural Science Foundation of China(No.52105373)the China Scholarship Council(No.202106020094).
文摘Ti-10V-2Fe-3Al alloy with fine-grainedβphases was fabricated by friction stir processing with opti-mized processing parameters.The superplastic behavior of the specimens was investigated by tensile deformation at different strain rates and temperatures,and an optimal superplastic elongation of 634%was achieved at 700℃ and 3×10^(-4)/s.An annealing treatment at 650℃ for 60 min showed a mi-crostructure withαprecipitates distributed in theβmatrix in the friction stir specimen.Such pre-heat treatment improves the superplasticity of the specimen,achieving an elongation of up to 807%at 750℃ and 3×10^(-4)/s.The influences of tensile temperatures and strain rates on the microstructural evolution,such as grain size variation,grain morphology,and phase transformations,were discussed.The super-plastic deformation behavior of fine-grained Ti-10V-2Fe-3Al alloy is controlled by grain boundary sliding and accompanied by dynamic phase transformation and recrystallization.
基金supported by the National Natural Science Foundation of China(No.51805265)the Fundamental Research Funds for the Central Universities,China(No.30922010921).
文摘Thin walls of an AZ91 magnesium alloy with fine equiaxed grains were fabricated via cold arc-based wire arc additive manufacturing(CA-WAAM),and the droplet transfer behaviours,microstructures,and mechanical properties were investigated.The results showed that the cold arc process reduced splashing at the moment of liquid bridge breakage and effectively shortened the droplet transfer period.The microstructures of the deposited samples exhibited layered characteristics with alternating distributions of coarse and fine grains.During layer-by-layer deposition,the β-phase precipitated and grew preferentially along grain boundaries,while the fineη-Al_(8)Mn_(5)phase was dispersed in the α-Mg matrix.The mechanical properties of the CA-WAAM deposited sample showed isotropic characteristics.The ultimate tensile strength and elongation in the building direction(BD)were 282.7 MPa and 14.2%,respectively.The microhardness values of the deposited parts were relatively uniform,with an average value of HV 69.6.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘The hot deformation characteristics of induction quenched Zr-Sn-Nb-Fe-Cr alloy forged rod in the temperature range of 600–900°C and strain rate range of 0.001–1 s^(-1)were studied by Gleeble3800 uniaxial hot compression experiment.The results show that the flow stress decreases with the decrease in strain rate and the increase in deformation temperature in the true stress-true strain curve of Zr-Sn-Nb-Fe-Cr alloy forged rod.Moreover,the hot deformation characteristics of the material can be described by the hyperbolic sine constitutive equation.Under the experimental conditions,the average thermal activation energy(Q)of the alloy was 412.9105 kJ/mol.The microstructure analysis of the processing map and the sample after hot compression shows that the optimum hot working parameters of the alloy are 795–900°C,0.001–0.0068 s^(-1),at the deformation temperature of 600–900°C,and the strain rate of 0.001–1 s^(-1).
文摘Agricultural Products Processing and Storage (ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature) is an international,pect-review ed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additio nally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
文摘Using a Gleeble 3500 thermomechanical simulation testing machine,the hot deformation characteristics of 23Cr-8Ni steel were investigated under the conditions of 1000–1250℃ and 0.001‒10 s^(−1).Furthermore,the microstructure of the characterization region was analyzed to investigate the recrystallization behavior of 23Cr-8Ni steel.Results show that as the strain rate decreases and the deformation temperature increases,the flow stress decreases.Because the softening phenomenon occurs after the peak stress,the flow stress decreases.The stress index(n)is 4.28,and the thermal deformation activation energy(Q)is 588878 J/mol.Processing map is established,and an optimal thermal processing range of 0.001–0.1 s^(−1) and 1000–1200℃ is achieved,therefore greatly promoting the yield rate.
文摘DeepSeek Chinese artificial intelligence(AI)open-source model,has gained a lot of attention due to its economical training and efficient inference.DeepSeek,a model trained on large-scale reinforcement learning without supervised fine-tuning as a preliminary step,demonstrates remarkable reasoning capabilities of performing a wide range of tasks.DeepSeek is a prominent AI-driven chatbot that assists individuals in learning and enhances responses by generating insightful solutions to inquiries.Users possess divergent viewpoints regarding advanced models like DeepSeek,posting both their merits and shortcomings across several social media platforms.This research presents a new framework for predicting public sentiment to evaluate perceptions of DeepSeek.To transform the unstructured data into a suitable manner,we initially collect DeepSeek-related tweets from Twitter and subsequently implement various preprocessing methods.Subsequently,we annotated the tweets utilizing the Valence Aware Dictionary and sentiment Reasoning(VADER)methodology and the lexicon-driven TextBlob.Next,we classified the attitudes obtained from the purified data utilizing the proposed hybrid model.The proposed hybrid model consists of long-term,shortterm memory(LSTM)and bidirectional gated recurrent units(BiGRU).To strengthen it,we include multi-head attention,regularizer activation,and dropout units to enhance performance.Topic modeling employing KMeans clustering and Latent Dirichlet Allocation(LDA),was utilized to analyze public behavior concerning DeepSeek.The perceptions demonstrate that 82.5%of the people are positive,15.2%negative,and 2.3%neutral using TextBlob,and 82.8%positive,16.1%negative,and 1.2%neutral using the VADER analysis.The slight difference in results ensures that both analyses concur with their overall perceptions and may have distinct views of language peculiarities.The results indicate that the proposed model surpassed previous state-of-the-art approaches.
基金supported by National Natural Science Foundation of China(Grant Nos.52205231,52205196)Taishan Scholars Program,and Research Project of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai(Grant Nos.AMGM0613,AMGM0620).
文摘Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 316L stainless steel were investigated by optimizing a DLP-compatible metal slurry formulation and sintering process.A photosensitive resin system(mass ratio of 5:1:2:2 for U600,LA,ACMO,and HDDA,respectively)with 88 wt%solid content is designed to achieve a slurry with balanced rheology,photocurability,and low pyrolysis residue.Compared to vacuum sintering,which leads to brittle fracture of material,the Ar/H2 mixed gas(5%H2)effectively reduces carbon and oxygen impurities via reduction,mitigating carbide and oxide segregation at grain boundaries and within grains,thereby enhancing strength-ductility.In addition,the prolonged high-temperature sintering inducesδ-ferrite precipitation at grain boundaries,which fills residual pores to improve densification obviously.Under optimized sintering conditions(Ar/H2,1380°C,6 h),the material achieves 96.2%relative density with tensile strength and fracture elongation of 543.5 MPa and 58.7%,respectively,exhibiting uniform dimple-dominated fracture morphology.This synergistic optimization of the slurry formulation and sintering parameters improves the strength-ductility balance in DLP-fabricated metal materials,offering theoretical and technical insights for the additive manufacturing of complex high-performance metal components.
文摘Fabric dyeing is a critical production process in the clothing industry and heavily relies on batch processing machines(BPM).In this study,the parallel BPM scheduling problem with machine eligibility in fabric dyeing is considered,and an adaptive cooperated shuffled frog-leaping algorithm(ACSFLA)is proposed to minimize makespan and total tardiness simultaneously.ACSFLA determines the search times for each memeplex based on its quality,with more searches in high-quality memeplexes.An adaptive cooperated and diversified search mechanism is applied,dynamically adjusting search strategies for each memeplex based on their dominance relationships and quality.During the cooperated search,ACSFLA uses a segmented and dynamic targeted search approach,while in non-cooperated scenarios,the search focuses on local search around superior solutions to improve efficiency.Furthermore,ACSFLA employs adaptive population division and partial population shuffling strategies.Through these strategies,memeplexes with low evolutionary potential are selected for reconstruction in the next generation,while thosewithhighevolutionarypotential are retained to continue their evolution.Toevaluate the performance of ACSFLA,comparative experiments were conducted using ACSFLA,SFLA,ASFLA,MOABC,and NSGA-CC in 90 instances.The computational results reveal that ACSFLA outperforms the other algorithms in 78 of the 90 test cases,highlighting its advantages in solving the parallel BPM scheduling problem with machine eligibility.
基金financial support from the National Science Foundation(NSF)EPSCoR R.I.I.Track-2 Program,awarded under the NSF grant number 2119691.
文摘The increasing frequency and severity of natural disasters,exacerbated by global warming,necessitate novel solutions to strengthen the resilience of Critical Infrastructure Systems(CISs).Recent research reveals the sig-nificant potential of natural language processing(NLP)to analyze unstructured human language during disasters,thereby facilitating the uncovering of disruptions and providing situational awareness supporting various aspects of resilience regarding CISs.Despite this potential,few studies have systematically mapped the global research on NLP applications with respect to supporting various aspects of resilience of CISs.This paper contributes to the body of knowledge by presenting a review of current knowledge using the scientometric review technique.Using 231 bibliographic records from the Scopus and Web of Science core collections,we identify five key research areas where researchers have used NLP to support the resilience of CISs during natural disasters,including sentiment analysis,crisis informatics,data and knowledge visualization,disaster impacts,and content analysis.Furthermore,we map the utility of NLP in the identified research focus with respect to four aspects of resilience(i.e.,preparedness,absorption,recovery,and adaptability)and present various common techniques used and potential future research directions.This review highlights that NLP has the potential to become a supplementary data source to support the resilience of CISs.The results of this study serve as an introductory-level guide designed to help scholars and practitioners unlock the potential of NLP for strengthening the resilience of CISs against natural disasters.
文摘This critical review looks at the assessment of the application of artificial intelligence in handling legal documents with specific reference to medical negligence cases with a view of identifying its transformative potentialities, issues and ethical concerns. The review consolidates findings that show the impact of AI in improving the efficiency, accuracy and justice delivery in the legal profession. The studies show increased efficiency in speed of document review and enhancement of the accuracy of the reviewed documents, with time efficiency estimates of 60% reduction of time. However, the review also outlines some of the problems that continue to characterize AI, such as data quality problems, biased algorithms and the problem of the opaque decision-making system. This paper assesses ethical issues related to patient autonomy, justice and non-malignant suffering, with particular focus on patient privacy and fair process, and on potential unfairness to patients. This paper’s review of AI innovations finds that regulations lag behind AI developments, leading to unsettled issues regarding legal responsibility for AI and user control over AI-generated results and findings in legal proceedings. Some of the future avenues that are presented in the study are the future of XAI for legal purposes, utilizing federated learning for resolving privacy issues, and the need to foster adaptive regulation. Finally, the review advocates for Legal Subject Matter Experts to collaborate with legal informatics experts, ethicists, and policy makers to develop the best solutions to implement AI in medical negligence claims. It reasons that there is great potential for AI to have a deep impact on the practice of law but when done, it must do so in a way that respects justice and on the Rights of Individuals.
基金Ting Chen thanks the China Scholarship Council for the Award of a Fellowship(No.202006230137)Benjamin Klusemann ac-knowledges funding by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)-project number 544306307+1 种基金Banglong Fu acknowledge the financial support of the National Natural Science Foundation of China(Grant No.52405386)State Key Laboratory of Precision Welding&Joining of Materials and Structures(Grant No.MSWJ-24M13).
文摘Constrained Friction Processing(CFP),a novel friction-based technique,has been developed to efficiently process fine-grained magnesium(Mg)rods,expanding the potential applications of biodegradable Mg alloys in medical implants.This study investigates the enhancement of mechanical properties through the implementation of multiple pass CFP(MP-CFP)in comparison to the conventional single pass CFP.The results reveal a substantial improvement in compressive yield strength(CYS),ultimate compressive strength,and failure plastic strain by 11%,28%,and 66%,respectively.A comprehensive analysis of material evolution during processing and the effects of the final microstructure on mechanical properties was conducted.The intricate material flow behavior during the final plunge stage of MP-CFP results in a reduced intensity of local basal texture and macrotexture.The diminished intensity of basal texture,combined with a low geometrical compatibility factor at the top of the rod after MP-CFP,effectively impedes slip transfer across grain boundaries.This leads to a local strain gradient along the compression direction,ultimately contributing to the observed enhancement in mechanical properties.The Mg-0.5Zn0.3Ca(wt.%)alloy,after texture modification by MP-CFP,exhibits a competitive CYS compared with other traditional methods,highlighting the promising application potential of MP-CFP.
基金supported by the National Key Research and Development Program of China(2023YFE0111800)Shaanxi Livestock and Poultry Breeding Double-chain Fusion Key Project(grant number 2022GD-TSLD-46-0501)。
文摘Background The diverse types and processing methods of grains intricately influence the sites and digestibility of starch digestion,thereby impacting energy utilization.This study aimed to explore the impact of grain variety and processing methods on the net energy(NE)in dairy goats,analyzing these effects at the level of nutrient digestion and metabolism.Methods Eighteen castrated Guanzhong dairy goats(44.25±3.59 kg BW)were randomly divided into 3 groups,each consisting of 6 replicates.The substitution method was employed to determine the NE values of the dry-rolled corn(DRC),dry-rolled wheat(DRW)or steam-flaked corn(SFC,360 g/L).Briefly,two phases were performed.Throughout the basal phase,all goats were fed the same basal diet.In the substitution phase,30%of the basal diet was replaced with DRC,DRW and SFC,respectively.Results In this study,the NE values of the DRC,DRW and SFC were 7.65,7.54 and 7.44 MJ/kg DM,respectively.Compared to the DRC group,the DRW group showed increased digestibility of starch and crude protein(CP).Similarly,the SFC group exhibited increased organic matter(OM)and starch digestibility and a trend towards higher dry matter(DM)digestibility,reduced fecal OM and starch content.Additionally,fecal volatile fatty acid(VFA)concentrations decreased in goats fed SFC.Correspondingly,digestible energy(DE)in the DRW and SFC groups tended to be higher than in the DRC group.DRW increased total VFA concentration compared to DRC,while SFC increased the proportion of propionate and decreased the acetate-to-propionate ratio in the rumen.Both the DRW and SFC diets elevated serum glucose levels.Furthermore,heat increment(HI)and gaseous energy(Gas E)related to fermentation were significantly higher in the DRW and SFC groups compared to the DRC group.Conclusion Our findings indicated that DRW and SFC increased rumen starch fermentation in goats,thereby improving total tract starch digestion and DE.However,DRW and SFC failed to improve NE value due to increased heat and gas energy production from fermentation.Therefore,excessively refined grains processing in the diet of dairy goats does not effectively improve energy efficiency.
