Atractylodis Rhizoma,a traditional Chinese medicine with an extensive history of treating gastrointestinal disorders and other diseases,undergoes various processing methods in China to enhance its therapeutic efficacy...Atractylodis Rhizoma,a traditional Chinese medicine with an extensive history of treating gastrointestinal disorders and other diseases,undergoes various processing methods in China to enhance its therapeutic efficacy for specific conditions.However,a comprehensive report detailing the changes in chemical composition and pharmacological effects due to these processing methods is currently lacking.This article provides a systematic review of the commonly employed processing techniques for Atractylodis Rhizoma,including raw Atractylodis Rhizoma(SCZ),bran-fried Atractylodis Rhizoma(FCZ),deep-fried Atractylodis Rhizoma(JCZ),and rice water-processed Atractylodis Rhizoma(MCZ).It examines the alterations in chemical constituents and pharmacological activities resulting from these processes and elucidates the mechanisms of action of the primary components in the various processed forms of Atractylodis Rhizoma in the treatment of gastrointestinal diseases.展开更多
To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECT...To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECTr),the cascade channel of the blisk is narrow,and the blank allowance distribution is uneven,making it difficult for the precision ECM to become balanced.In blisk production,the two-step method cannot make precision ECM enter equilibrium for some blisk types.A three-step processing method is proposed to overcome this problem.The threestep method adds Electrochemical Homogenizing Machining(ECHM)between the ECTr and precision ECM steps so that the blank allowance can be homogenized quickly without unduly affecting the minimum allowance.Comparative machining experiments of the two-and three-step methods were performed to verify the improvement to blade machining accuracy.The processing results show that the contour parameters of the blade after the three-step method implementation are much better.The allowance difference of the concave(convex)side decreased by 70.5%(65%).In addition,the current in the three-step method is stable at 110 A at the end of precision ECM,verifying successfully entering the equilibrium state.展开更多
Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to pro...Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to provide some references for deveIoping a suitabIe processing procedure that can be used in Iarge-scale pro-duction and improve herb quality.展开更多
Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which ...Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.展开更多
Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processi...Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processing methods.Here,we conducted a lipidomics analysis using UPLC-QTOF-MS to characterize the lipid composition of cold-pressed hazelnut oil(CPO),ultrasonic-assisted hexane hazelnut oil(UHO)and enzyme-assisted aqueous hazelnut oil(EAO).A total of 10 subclasses of 98 lipids were identified,including35 glycerolipids(GLs),56 glycerophospholipids(GPs)and 7 sphingolipids(SPs).The total lipid and GL content were the highest in CPO,GP content was the highest in UHO and the ceramide content in SPs was most abundant in EAO.Multivariate statistical analysis showed that the lipid profiles of hazelnut oil prepared with different processing methods varied.Twelve significantly different lipids(TAG 54:3,TAG 52:2,TAG54:4,TAG 54:2,TAG 52:3,TAG 54:5,DAG 36:2,DAG 36:4,DAG 36:3,PC 36:2,PA 36:2 and PE 36:3)were identified,and these lipids could potentially be used as biomarkers to distinguish between hazelnut oil subjected to different processing methods.Our results provide useful information for hazelnut oil applications and new insight into the effects of edible oil processing.展开更多
Faba bean(Vicia faba L.)has been identified as a rich source of L-DOPA,which is used in treating Parkinson's disease.Biosynthesis and accumulation of active substances such as L-DOPA in plant tissues may interact ...Faba bean(Vicia faba L.)has been identified as a rich source of L-DOPA,which is used in treating Parkinson's disease.Biosynthesis and accumulation of active substances such as L-DOPA in plant tissues may interact with growing conditions and processing methods.Accumulation trends of L-DOPA in various faba bean organs and the effect of drought stress and N fertilization on L-DOPA content were studied in a field and two greenhouse experiments.The influence of various processing methods on L-DOPA content of faba bean tissues was evaluated.The highest L-DOPA content was detected in fresh leaves(22.4 mg g^(-1))followed by flowers,young pods,mature seeds,and roots.Regardless of processing method,L-DOPA concentration in faba bean tissues was significantly reduced when tissues were boiled or dried.Among various methods of processing,freezing had the lowest detrimental effect,reducing L-DOPA concentrations by 24.1%and 21.1%in leaves and seeds,respectively.Drought stress elevated L-DOPA concentration,and maximum L-DOPA(23.3 mg g^(-1)of biomass)was extracted from plants grown under severe drought stress.However,L-DOPA yield(L-DOPA concentration×biomass)was compromised,owing to the adverse influence of drought stress on dry matter production.No significant difference in L-DOPA concentration was detected among various N application rates.展开更多
The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.The...The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.Therefore,in this study,the effects of three different processing methods,i.e.,microwave,ultrasound,and high temperature-pressure(HTP)treatments,on the digestion stability of TM from Chinese mitten crab muscle and the allergenicity of TM digestion products were explored.sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that microwaving had little effect on the digestion stability of TM.In contrast,ultrasound and HTP treatments facilitated the degradation of TM.Similarly,Western blotting and inhibition ELISA indicated that the IgE-binding activity of TM was significantly reduced after treatment with ultrasound or HTP.Among the three different proces sing methods,HTP was the most effective method for improving digestibility of TM and reducing immunoreactivity.This finding provides new insights into treatments for crab allergies.展开更多
Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and ...Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.展开更多
We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing f...We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.展开更多
The voltage characteristics of a half-wavelength transmission(HWLT)system lack mechanism explanation and systematic summary.In this paper,both the steady-state and fault voltage characteristics are analyzed and explai...The voltage characteristics of a half-wavelength transmission(HWLT)system lack mechanism explanation and systematic summary.In this paper,both the steady-state and fault voltage characteristics are analyzed and explained based on the wave process method.An analysis model is established for HWLT lines and wave propagation equations with different terminal conditions are deduced.For steady-state conditions,voltage profiles along HWLT lines are depicted and partial overvoltage occurs when there is an overload or low-power factor.In addition,fault voltage characteristics are analyzed under load-rejection or short-circuit conditions.The series resonance overvoltage will happen when short-circuit faults occur at certain positions and its peak value is influenced by grid strength or fault type.Furthermore,a refined transmission line model is presented to consider non-ideal factors and simulation results demonstrate that geomorphic conditions and electromagnetic environments influence line voltage characteristics to a certain extent.展开更多
Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic ...Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic rock heterogeneity.The constitutive law of representative volume element(RVE)is established according to continuum damage mechanics in which double-damage criterion is considered.The damage evolution and accumulation of RVEs are used to reveal the macroscopic rock failure characteristics.Each single RVE will be represented by one unique element.The initiation,propagation and coalescence of meso-to macro-cracks are captured by smearing failed elements.The above ideas are formulated into the framework of the DSM and programed into self-developed rock failure process analysis(RFPA)software.Two laboratory-scale examples are conducted and the well-known engineering-scale tests,i.e.Atomic Energy of Canada Limited’s(AECL’s)Underground Research Laboratory(URL)tests,are used for verification.It shows that the simulation results match with other experimental results and field observations.展开更多
In this study,a novel solgel method has been developed to prepare LiTi_(2)(PO_(4))_(3) lithium ion conductor as monophase at relatively low temperature(600).According to the XRD and IR analysis,the asprepared sample r...In this study,a novel solgel method has been developed to prepare LiTi_(2)(PO_(4))_(3) lithium ion conductor as monophase at relatively low temperature(600).According to the XRD and IR analysis,the asprepared sample remained an amorphous state up to 500.The activation energy was calculated to be 252 kJ/mol according to the modified Kissinger equation.展开更多
Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical com...Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical composition in jujube processed products,and impact of processing on chemical composition of jujube are reviewed,which could provide basic data for fully studying,developing and utilizing jujube by scholars and technical staff.展开更多
This paper presents a small perturbation Cramer method for obtaining the large deviation principle of a family of measures (β,ε> 0) on a topological vector space. As an application, we obtain the moderate deviati...This paper presents a small perturbation Cramer method for obtaining the large deviation principle of a family of measures (β,ε> 0) on a topological vector space. As an application, we obtain the moderate deviation estimations for uniformly ergodic Markov processes.展开更多
An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM...An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM). In the procedure, the minimum quadratic sum of the normal deviation is used as the object function and the equidistant curve is dealed with instead of the teeth profile. CMM is a high accurate measuring machine which can provide a way to evaluate the accuracy of the cycloidal gear completely.展开更多
Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily h...Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily hydrolyzed to release cyanide salt compounds which is toxic to the nervous system especially the optic nerve, sometimes leading to optic neuropathy and visual impairment. Aim: The aim of this study is to find out the impact of selected processing methods of high-level cyanide in cassava on optic neuropathy in Wistar albino rats. Methodology: Twenty-four Wistar albino rats were fed with different concentration and duration of predetermined high-cyanide content cassava root cultivar which was processed using different processing methods adopted by various communities in Rivers State, Nigeria (for human consumption). A control group of 3 Wistar albino rats was fed with normal “Growth Mesh” meals. The pre and post weights of the animals and the fundoscopic optic nerve status of the rats were evaluated after 30 and 60 days. SPSS Version 25 was employed for descriptive and inferential statistical analyses. A p-value of ≤0.05 was considered statistically significant. Results: The Cassava species available in Rivers State have high cyanide content (2336.79 mg CN<sup>-</sup>/kg dry weight of cassava). There was statistically significant reduction in the cyanide content (p = 0.000) depending on the various common processing methods (into garri for human consumption): 24 hours, 48 hours, fermentation;with and without red palm oil additive. The individual weights as well as the mean weight of the 24 rats in the experimental group increased gradually from the first week to the 9<sup>th</sup> week with a slight weight reduction on the third and fourth weeks which was not statistically significant (p = 0.092). However, there was a steady increase in the weights of the animals in the control group throughout the 9 weeks. Varying degrees of optic neuropathy occurred, worse with the rats that had 24-hour fermented cassava twice daily for 60 days. The intra and inter group differences in the optic disc changes was statistically significant (p = 0.000). Conclusion: Longer duration of processing cassava roots into garri for human consumption reduces its cyanide content and minimizes the adverse impact on the optic nerve.展开更多
From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship betw...From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.展开更多
Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali t...Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.展开更多
Ag-sheathed (Bi,Pb)(2)SoCa(2)Cu(3)O(x) tapes were prepared by the powder-in-tube method. The influences of rolling parameters on superconducting characteristics of Bi(2223)/Ag tapes were analyzed qualitatively with a ...Ag-sheathed (Bi,Pb)(2)SoCa(2)Cu(3)O(x) tapes were prepared by the powder-in-tube method. The influences of rolling parameters on superconducting characteristics of Bi(2223)/Ag tapes were analyzed qualitatively with a statistical method. The results demonstrate that roll diameter and reduction per pass significantly influence the properties of Bi(2223)/Ag superconducting tapes while roll speed does less and working friction the least. An optimized rolling process was therefore achieved according to the above results.展开更多
基金supported by the National Natural Science Foundation of China (No.82304722)Hubei Provincial Natural Science Foundation of China (No.2023AFD154).
文摘Atractylodis Rhizoma,a traditional Chinese medicine with an extensive history of treating gastrointestinal disorders and other diseases,undergoes various processing methods in China to enhance its therapeutic efficacy for specific conditions.However,a comprehensive report detailing the changes in chemical composition and pharmacological effects due to these processing methods is currently lacking.This article provides a systematic review of the commonly employed processing techniques for Atractylodis Rhizoma,including raw Atractylodis Rhizoma(SCZ),bran-fried Atractylodis Rhizoma(FCZ),deep-fried Atractylodis Rhizoma(JCZ),and rice water-processed Atractylodis Rhizoma(MCZ).It examines the alterations in chemical constituents and pharmacological activities resulting from these processes and elucidates the mechanisms of action of the primary components in the various processed forms of Atractylodis Rhizoma in the treatment of gastrointestinal diseases.
基金supported by the National Natural Science Foundation of China(No.52075253)the Innovation Research Team of the National Natural Science Foundation of China(No.51921003)。
文摘To ensure the dimensional accuracy of the final blade profile,it is necessary for precision Electrochemical Machining(ECM)of blade profile to come into an equilibrium state.However,after Electrochemical Trepanning(ECTr),the cascade channel of the blisk is narrow,and the blank allowance distribution is uneven,making it difficult for the precision ECM to become balanced.In blisk production,the two-step method cannot make precision ECM enter equilibrium for some blisk types.A three-step processing method is proposed to overcome this problem.The threestep method adds Electrochemical Homogenizing Machining(ECHM)between the ECTr and precision ECM steps so that the blank allowance can be homogenized quickly without unduly affecting the minimum allowance.Comparative machining experiments of the two-and three-step methods were performed to verify the improvement to blade machining accuracy.The processing results show that the contour parameters of the blade after the three-step method implementation are much better.The allowance difference of the concave(convex)side decreased by 70.5%(65%).In addition,the current in the three-step method is stable at 110 A at the end of precision ECM,verifying successfully entering the equilibrium state.
基金Supported by National Key Technology Research and Development Program during the12thFive-Year Plan Period(2011BAI06B01,2011BAC02B04)Special Fund for Traditional Chinese Medicine Scientific Research(201407002)+1 种基金Science and Technology Development Program of Shandong Province(2014GSF119018)Traditional Chinese Medicine Science and Technology Development Program of Shandong Province(2011Z-003-2)~~
文摘Processing method is one of the maln factors affecting the quality of hon-eysuckIe herbs, which is directIy reIated to economic benefits of farmers. This paper compares various processing methods of honeysuckIe to provide some references for deveIoping a suitabIe processing procedure that can be used in Iarge-scale pro-duction and improve herb quality.
基金Project supported by the National Natural Science Foundation of China (Nos. 50946052, 51076118 and 51006075)the New Century Excellent Talents (No. NCET-10-0605)+2 种基金the Shanghai Rising-Star Program (No. 11QH1402500)the Fundamental Research Funds for the Central Universitiesthe Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 200802471052)
文摘Based on the high flux synchrotron X-ray of the Shanghai Synchrotron Radiation Facility (SSRF), high precision 3D digital models of diesel nozzle tips have been established by X-ray micro-tomography technology, which reveal the internal surfaces and structures of orifices. To analyze the machining precision and characteristics of orifice processing methods, an ap- proach is presented based on the parameters of the internal structures of nozzle orifices, including the nozzle diameter, the orifice inner surface waviness, the eccentricity distance and the angle between orifices. Using this approach, two kinds of nozzle orifice processing methods, computerized numerical control drilling and electric discharge machining, have been studied and compared. The results show that this approach enables a simple, direct, and comprehensive contrastive analysis of nozzle orifice processing methods. When processing a single orifice, the electric discharge machining method has obvious advantages. However, when there are multiple orifices, the error levels of the two methods are similar in relation to the symmetry of distribution of the orifices.
基金supported by Key R&D Project of Liaoning Province,under Grant Research and Demonstration of Key Technologies for Deep Processing and Comprehensive Utilization of Northeast Hazelnuts(2020JH2/10200037)Service Local Project of Liaoning Province,under Grant Demonstration and Promotion of new deep-processing technology for comprehensive utilization of Northeast Hazelnuts(LSNFW201903)horizontal subject,under Grant Demonstration and Promotion of key technologies for transformation and deep processing of wild hazelnut forest in northwestern Liaoning(H2019388)。
文摘Although hazelnut oil is rich in nutrients,its quality is greatly affected by how it is processed.However,no studies to date have comprehensively analyzed the lipid composition of hazelnut oil using different processing methods.Here,we conducted a lipidomics analysis using UPLC-QTOF-MS to characterize the lipid composition of cold-pressed hazelnut oil(CPO),ultrasonic-assisted hexane hazelnut oil(UHO)and enzyme-assisted aqueous hazelnut oil(EAO).A total of 10 subclasses of 98 lipids were identified,including35 glycerolipids(GLs),56 glycerophospholipids(GPs)and 7 sphingolipids(SPs).The total lipid and GL content were the highest in CPO,GP content was the highest in UHO and the ceramide content in SPs was most abundant in EAO.Multivariate statistical analysis showed that the lipid profiles of hazelnut oil prepared with different processing methods varied.Twelve significantly different lipids(TAG 54:3,TAG 52:2,TAG54:4,TAG 54:2,TAG 52:3,TAG 54:5,DAG 36:2,DAG 36:4,DAG 36:3,PC 36:2,PA 36:2 and PE 36:3)were identified,and these lipids could potentially be used as biomarkers to distinguish between hazelnut oil subjected to different processing methods.Our results provide useful information for hazelnut oil applications and new insight into the effects of edible oil processing.
基金partially funded through a graduate student grant received from Northeast Sustainable Agriculture Research and Education(GNE14-078)
文摘Faba bean(Vicia faba L.)has been identified as a rich source of L-DOPA,which is used in treating Parkinson's disease.Biosynthesis and accumulation of active substances such as L-DOPA in plant tissues may interact with growing conditions and processing methods.Accumulation trends of L-DOPA in various faba bean organs and the effect of drought stress and N fertilization on L-DOPA content were studied in a field and two greenhouse experiments.The influence of various processing methods on L-DOPA content of faba bean tissues was evaluated.The highest L-DOPA content was detected in fresh leaves(22.4 mg g^(-1))followed by flowers,young pods,mature seeds,and roots.Regardless of processing method,L-DOPA concentration in faba bean tissues was significantly reduced when tissues were boiled or dried.Among various methods of processing,freezing had the lowest detrimental effect,reducing L-DOPA concentrations by 24.1%and 21.1%in leaves and seeds,respectively.Drought stress elevated L-DOPA concentration,and maximum L-DOPA(23.3 mg g^(-1)of biomass)was extracted from plants grown under severe drought stress.However,L-DOPA yield(L-DOPA concentration×biomass)was compromised,owing to the adverse influence of drought stress on dry matter production.No significant difference in L-DOPA concentration was detected among various N application rates.
基金supported by the earmarked fund for the Anhui Provincial Modern Agri-industry Technology Research System(AHCYJSTX-08)the China Agriculture Research System of MOF and MARA(CARS-48)。
文摘The tropomyosin(TM)fractions of crab protems may cause allergic reactions in mdividuals susceptible to allergies;however,efficient and safe methods by which to reduce such allergenicity are not currently available.Therefore,in this study,the effects of three different processing methods,i.e.,microwave,ultrasound,and high temperature-pressure(HTP)treatments,on the digestion stability of TM from Chinese mitten crab muscle and the allergenicity of TM digestion products were explored.sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that microwaving had little effect on the digestion stability of TM.In contrast,ultrasound and HTP treatments facilitated the degradation of TM.Similarly,Western blotting and inhibition ELISA indicated that the IgE-binding activity of TM was significantly reduced after treatment with ultrasound or HTP.Among the three different proces sing methods,HTP was the most effective method for improving digestibility of TM and reducing immunoreactivity.This finding provides new insights into treatments for crab allergies.
文摘Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.
基金National Natural Science Foundtion of China(No.11435011)Young Teachers Fund of Nanjing Institute of Technology,China(Nos.QKJ201907 and QKJ201908)+2 种基金China Scholarship Council(No.201708320319)Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.KYZZ16-0349)Qing Lan Project of Jiangsu Province,China。
文摘We present an improved digital image processing(DIP)method to calculate the widths of single slits.Different from the traditional laser Fraunhofer diffraction experiment in college physical experiments,by performing fast Fourier transform,inverse fast Fourier transform and the nonlinear leastsquare fitting on the diffraction pattern taken by a camera,the DIP method can quickly return an analytic expression,whose period is used to calculate widths of single slits.By comparing the measured results by the DIP method and the successional difference(SD)method,we find that for a single slit whose width is 60372μm,the DIP method is more accurate.Experimental results show that for single slits with widths between 40μm and 160μm,the relative error of the DIP method is less than 2.78%.Also,the DIP method can be used to measure the diameter of filament and fibres online in real time.
基金supported by the State Grid Corporation of China(No.SGSDDK00KJJS1600149).
文摘The voltage characteristics of a half-wavelength transmission(HWLT)system lack mechanism explanation and systematic summary.In this paper,both the steady-state and fault voltage characteristics are analyzed and explained based on the wave process method.An analysis model is established for HWLT lines and wave propagation equations with different terminal conditions are deduced.For steady-state conditions,voltage profiles along HWLT lines are depicted and partial overvoltage occurs when there is an overload or low-power factor.In addition,fault voltage characteristics are analyzed under load-rejection or short-circuit conditions.The series resonance overvoltage will happen when short-circuit faults occur at certain positions and its peak value is influenced by grid strength or fault type.Furthermore,a refined transmission line model is presented to consider non-ideal factors and simulation results demonstrate that geomorphic conditions and electromagnetic environments influence line voltage characteristics to a certain extent.
基金supported in part by the National Natural Science Foundation of China (Grant Nos.51679028 and 51879034)Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology (Grant No. SKLGDUEK1804)the Fundamental Research Funds for the Central Universities (Grant No.DUT18JC10)
文摘Damage smear method(DSM)is adopted to study trans-scale progressive rock failure process,based on statistical meso-damage model and finite element solver.The statistical approach is utilized to reflect the mesoscopic rock heterogeneity.The constitutive law of representative volume element(RVE)is established according to continuum damage mechanics in which double-damage criterion is considered.The damage evolution and accumulation of RVEs are used to reveal the macroscopic rock failure characteristics.Each single RVE will be represented by one unique element.The initiation,propagation and coalescence of meso-to macro-cracks are captured by smearing failed elements.The above ideas are formulated into the framework of the DSM and programed into self-developed rock failure process analysis(RFPA)software.Two laboratory-scale examples are conducted and the well-known engineering-scale tests,i.e.Atomic Energy of Canada Limited’s(AECL’s)Underground Research Laboratory(URL)tests,are used for verification.It shows that the simulation results match with other experimental results and field observations.
文摘In this study,a novel solgel method has been developed to prepare LiTi_(2)(PO_(4))_(3) lithium ion conductor as monophase at relatively low temperature(600).According to the XRD and IR analysis,the asprepared sample remained an amorphous state up to 500.The activation energy was calculated to be 252 kJ/mol according to the modified Kissinger equation.
基金Supported by Scientific Research Fund Project of Yunnan Department of Education(2018JS719).
文摘Historical evolution of jujube processing,recording situation of modern processing specifications of jujube,research status of processing methods of jujube at home in recent years,content analysis of main chemical composition in jujube processed products,and impact of processing on chemical composition of jujube are reviewed,which could provide basic data for fully studying,developing and utilizing jujube by scholars and technical staff.
文摘This paper presents a small perturbation Cramer method for obtaining the large deviation principle of a family of measures (β,ε> 0) on a topological vector space. As an application, we obtain the moderate deviation estimations for uniformly ergodic Markov processes.
文摘An error processing method is presented based on optimization theory and microcomputer technique which can be successfully used in the cycloidal gear measurement on three dimensional coordinates measuring machine (CMM). In the procedure, the minimum quadratic sum of the normal deviation is used as the object function and the equidistant curve is dealed with instead of the teeth profile. CMM is a high accurate measuring machine which can provide a way to evaluate the accuracy of the cycloidal gear completely.
文摘Background: Cassava tuber crop is a staple food rich in carbohydrates and utilized in various forms by millions of Nigerians. The storage root of the cassava contains linamarin, a cyanogenic glycoside that is easily hydrolyzed to release cyanide salt compounds which is toxic to the nervous system especially the optic nerve, sometimes leading to optic neuropathy and visual impairment. Aim: The aim of this study is to find out the impact of selected processing methods of high-level cyanide in cassava on optic neuropathy in Wistar albino rats. Methodology: Twenty-four Wistar albino rats were fed with different concentration and duration of predetermined high-cyanide content cassava root cultivar which was processed using different processing methods adopted by various communities in Rivers State, Nigeria (for human consumption). A control group of 3 Wistar albino rats was fed with normal “Growth Mesh” meals. The pre and post weights of the animals and the fundoscopic optic nerve status of the rats were evaluated after 30 and 60 days. SPSS Version 25 was employed for descriptive and inferential statistical analyses. A p-value of ≤0.05 was considered statistically significant. Results: The Cassava species available in Rivers State have high cyanide content (2336.79 mg CN<sup>-</sup>/kg dry weight of cassava). There was statistically significant reduction in the cyanide content (p = 0.000) depending on the various common processing methods (into garri for human consumption): 24 hours, 48 hours, fermentation;with and without red palm oil additive. The individual weights as well as the mean weight of the 24 rats in the experimental group increased gradually from the first week to the 9<sup>th</sup> week with a slight weight reduction on the third and fourth weeks which was not statistically significant (p = 0.092). However, there was a steady increase in the weights of the animals in the control group throughout the 9 weeks. Varying degrees of optic neuropathy occurred, worse with the rats that had 24-hour fermented cassava twice daily for 60 days. The intra and inter group differences in the optic disc changes was statistically significant (p = 0.000). Conclusion: Longer duration of processing cassava roots into garri for human consumption reduces its cyanide content and minimizes the adverse impact on the optic nerve.
基金Item Sponsored by National Basic Research Programof China (200002600)
文摘From the viewpoint of systems energy conservation, the influences of material flow on its energy consumption in a steel manufacturing process is an important subject. The quantitative analysis of the relationship between material flow and the energy intensity is useful to save energy in steel industry. Based on the concept of standard material flow diagram, all possible situations of ferric material flow in steel manufacturing process are analyzed. The expressions of the influence of material flow deviated from standard material flow diagram on energy consumption are put forward.
文摘Random error of grinding process is central factor th at give an effect on grinding quality all through. Optimum methods are usually a pplied on grinding process for higher productivity and preferable grinding quali ty. But the grinding quality can’t be reliably controlled now and then while opt imal solution of grinding processing parameters have been applied in production, because of two involved aspects which are availability of established empirical formulas and reliability of setting up optimum mathematical model. That is to s ay, there is particular application of optimum methods in grinding process. This paper discussed that how to confirm conditions of grinding test which be po int to grinding peculiarity when test design and regression analysis are used to setting up some empirical formulas. In order to reduce effect of random errors on precision of the empirical formulas and enable them to be applied widely, a m ethod that a lot of random error can be sufficiently contained in grinding test was suggested. And then, A means to ameliorate restriction formulas of grinding quality is expounded based on marked level of the empirical formulas and improve d reliability of optimum mathematical model is given, which offer an effectual w ay for solving grinding quality out of control as a result of random error and w orkable optimal solution of grinding processing parameters can be applied in the production really. Finally, an example is presented.
文摘Ag-sheathed (Bi,Pb)(2)SoCa(2)Cu(3)O(x) tapes were prepared by the powder-in-tube method. The influences of rolling parameters on superconducting characteristics of Bi(2223)/Ag tapes were analyzed qualitatively with a statistical method. The results demonstrate that roll diameter and reduction per pass significantly influence the properties of Bi(2223)/Ag superconducting tapes while roll speed does less and working friction the least. An optimized rolling process was therefore achieved according to the above results.
