Casting blast can greatly reduce the stripping cost and improve the production capacity of opencast coal mines. Key technologies including high bench blasting, inclined hole, millisecond blasting, pre-splitting blasti...Casting blast can greatly reduce the stripping cost and improve the production capacity of opencast coal mines. Key technologies including high bench blasting, inclined hole, millisecond blasting, pre-splitting blasting and casting blast parameters determination which have influence on the effect of casting blast have been researched with the combination of the ballistic theory and experience in mines. The integrated digital processing system of casting blast was developed in order to simplify the design process of casting blast, improve working efficiency and veracity of design result and comprehensively adopt the software programming method and the theory of casting blast. This system has achieved five functions, namely, the 3D visualization graphics management, the intelligent management of geological information, the intelligent design of casting blast, the analysis and prediction of the blasting effect and the automatic output of the design results. Long-term application in opencast coal mines has shown that research results can not only reduce the specific explosive consumption and improve the blasting effect, but also have high value of popularization and application.展开更多
Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is ...Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.展开更多
A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation su...A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation subsystem. A non-contact measurement method based on digital image processing is introduced to improve measurement of specimen deformation. Based on the method, a series of conventional tri-axial compression tests under diverse stress paths are done. Then an elasto-plastic constitutive model of soil is acquired through the numerical method of modeling constitutive law for geomaterial. Two examples of specimen deformation and ground subsidence are presented and discussed. It indicated that this method can rationally simulate the stress-strain relationship of soil, which reflects the effect of stress path on soil stress-strain relationship.展开更多
On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.Th...On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.展开更多
The ESS software package is prepared for electrical data processing in the fields of coal prospecting, hydrogeologicai engineering, and can be used in the other fields of electrical data processing. It can be operated...The ESS software package is prepared for electrical data processing in the fields of coal prospecting, hydrogeologicai engineering, and can be used in the other fields of electrical data processing. It can be operated on any kind of microcomputer which has an internal memories of more than 512kB.The ESS software package would be leading the office operation to an automatic data processing period and the field work free from the tedious, repeated data treating and mapping, so that the engineers would have more time to analyse and interpret field data. Undoubtedly, it is of benefit to improving the relibility of the geological evaluation.展开更多
The heavy-ion accelerator facility(HIAF)under construction in China will produce various stable and intense radioactive beams with energies ranging from MeV/u to GeV/u.The ion-linac(iLinac)accelerator,which will serve...The heavy-ion accelerator facility(HIAF)under construction in China will produce various stable and intense radioactive beams with energies ranging from MeV/u to GeV/u.The ion-linac(iLinac)accelerator,which will serve as the injector for the HIAF,is a superconducting heavy-ion accelerator containing 13 cryomodules.It will operate in either continuous wave mode or pulsed mode,with a beam current ranging from 0.01 to 1 emA.The beam position monitor(BPM)is crucial for this high-beam-power machine,which requires precise beam control and a very small beam loss of less than 1 W/m,especially inside the cryomodules of this unique beam instrument.Nearly 70 BPMs will be installed on the iLinac.New digital beam position and phase measurement(DBPPM)electronics based on a heterogeneous multiprocessing platform system-on-chip(MPSoC)has been developed to provide accurate beam trajectory and phase measurements as well as beam interlocking signals for a fast machine protection system(MPS).The DBPPM comprises an analog front-end(AFE)board in field programmable gate array(FPGA)mezzanine-connector(FMC)form factor,along with a digital signal processing board housed within a “2U 19”chassis.To mitigate radio frequency(RF)leakage effects from high-power RF systems in certain scenarios,beam signals undergo simultaneous processing at both fundamental and second-harmonic frequencies.A dynamic range from-65 dBm to 0 dBm was established to accommodate both weak beam commissioning and high-intensity operational demands.Laboratory tests demonstrated that at input power levels exceeding-45 d Bm,the phase resolution surpasses 0.05°,and the position resolution exceeds 5μm.These results align well with the stipulated measurement requirements.Moreover,the newly developed DBPPM has self-testing and self-calibration functions that are highly helpful for the systematic evaluation of numerous electronic components and fault diagnosis equipment.In addition,the DBPPM electronics implements a 2D nonlinear polynomial correction on the FPGA and can collect accurate real-time position measurements at large beam offsets.This newly developed DBPPM electronics has been applied to several Linac machines,and the results from beam measurements show high performance,good long-term stability,and high reliability.In this paper,a detailed overview of the architecture,performance,and proof-of-principle measurement of the beams is presented.展开更多
Electronic 3D printing possesses a remarkable molding ability and convenience in integrated circuits,flexible wearables,and individual automobile requirements.However,traditional 3D printing technology still struggles...Electronic 3D printing possesses a remarkable molding ability and convenience in integrated circuits,flexible wearables,and individual automobile requirements.However,traditional 3D printing technology still struggles to meet the demands of high precision and high efficiency in the process of fabricating a curved surface circuit,particularly achieving precise silver circuit molding on irregular substrates.Here,a high-precision and muti-scaled conformal manufacturing method for silver circuits is presented through the digital light processing(DLP)of ultraviolet-curable silver paste(UV-SP)with adjustable photocuring properties,enabling the successful preparation of micro-scaled conductive structure on the sharply skewed hook face.The minimum modeling depth and width of the cured silver paste can be well controlled to 10 and 88µm,respectively.Compared with traditional printing technology,the printing efficiency of complex patterns has increased by over 70%.The printed silver circuit demonstrates an exceptionally high electrical conductivity,reaching as high as 1.16×10^(7) S/m.Additionally,the UV-SP exhibits significant manufacturing efficiency and superior molding resolution compared to conventional direct ink writing and inkjet printing techniques,thereby contributing to the attainment of high precision and efficiency of conformal and micro-molding manufacturing in sensors,communication antennas,and other electronic devices based on curved substrates.展开更多
Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 31...Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 316L stainless steel were investigated by optimizing a DLP-compatible metal slurry formulation and sintering process.A photosensitive resin system(mass ratio of 5:1:2:2 for U600,LA,ACMO,and HDDA,respectively)with 88 wt%solid content is designed to achieve a slurry with balanced rheology,photocurability,and low pyrolysis residue.Compared to vacuum sintering,which leads to brittle fracture of material,the Ar/H2 mixed gas(5%H2)effectively reduces carbon and oxygen impurities via reduction,mitigating carbide and oxide segregation at grain boundaries and within grains,thereby enhancing strength-ductility.In addition,the prolonged high-temperature sintering inducesδ-ferrite precipitation at grain boundaries,which fills residual pores to improve densification obviously.Under optimized sintering conditions(Ar/H2,1380°C,6 h),the material achieves 96.2%relative density with tensile strength and fracture elongation of 543.5 MPa and 58.7%,respectively,exhibiting uniform dimple-dominated fracture morphology.This synergistic optimization of the slurry formulation and sintering parameters improves the strength-ductility balance in DLP-fabricated metal materials,offering theoretical and technical insights for the additive manufacturing of complex high-performance metal components.展开更多
An adaptive dispersion estimation(ADE)is proposed to compensate dispersion and estimate the transfer function of the fiber channel with GerchbergSaxton(G-S)algorithm,using the stochastic gradient descent(SGD)method in...An adaptive dispersion estimation(ADE)is proposed to compensate dispersion and estimate the transfer function of the fiber channel with GerchbergSaxton(G-S)algorithm,using the stochastic gradient descent(SGD)method in the intensity-modulation and direct-detection(IM-DD)system,improving the tolerance of the algorithm to chromatic dispersion(CD).In order to address the divergence arising from the perturbation in the amplitude of the received signal caused by the filtering effect of the non-ideal channels,a channel-compensation equalizer(CCE)derived from the back-to-back(BTB)scenario is employed at the transmitter to make the amplitude of the received signal depicting the CD effect more accurately.The simulation results demonstrate the essentiality of CCE for the convergence and performance improvement of the G-S algorithm.Results show that it supports 112Gb/s four-level pulse amplitude modulation(PAM4)over 100 km standard single-mode fiber(SSMF)transmission under the 7%forward error correction(FEC)threshold of 3.8E-3.Besides,ADE improves the tolerance to wavelength drift from about 4 nm to 42 nm,and there is a better tolerance for fiber distance perturbation,indicating the G-S algorithm and its derived algorithms with the ADE scheme exhibit superior robustness to the perturbation in the system.展开更多
Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results ...Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.展开更多
This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(...This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.展开更多
A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing （DSP...A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing （DSP） shape signal processing board and the shape control model. Based on the shape detecting principle, the shape detecting roller is designed with a new integral structure for improving the precision of shape detecting and avoiding scratching strip surface. Based on the DSP technology, the DSP shape signal processing circuit board is designed and embedded in the shape detecting system for the reliability and stability of shape signal processing. The shape detecting system was successfully used in Angang 1 250 mm HC 6-high reversible cold rolling mill. The precision of shape detecting is 0.2 I and the shape deviation is controlled within 6 1 after the close loop shape control is input.展开更多
The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although vari...The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.展开更多
Since Pulse Code Modulation emerged in 1937, digitized speech has experienced rapid development due to its outstanding voice quality, reliability, robustness and security in communication. But how to reduce channel wi...Since Pulse Code Modulation emerged in 1937, digitized speech has experienced rapid development due to its outstanding voice quality, reliability, robustness and security in communication. But how to reduce channel width without loss of speech quality remains a crucial problem in speech coding theory. A new full-duplex digital speech communication system based on the Vocoder of AMBE-1000(TM) and microcontroller ATMEL 89C51 is introduced. It shows higher voice quality than current mobile phone system with only a quarter of channel width needed for the latter. The prospective areas in which the system can be applied include satellite communication, IP Phone, virtual meeting and the most important, defence industry.展开更多
To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of san...To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of sand were measured to characterize particle form.The area and perimeter were measured to characterize particle angularity.The results of the DIP method and Vernier caliper were compared to examine the accuracy of the DIP method.The sample size test was conducted to show the statistical significance of shape results measured by the DIP method.The practicality of the DIP method was verified by instance analysis.The results show that aspect ratios and roundness measured by the DIP method are equal to ones by the Vernier caliper.Results by DIP are dependent on the sand particle number,and at least 350 particles should be measured to represent the overall shape property of sand.The results show that the DIP method is able to distinguish the differences in the shape of sand particles.It achieves the direct measurement of sand particle thickness,and the characterization results of sand aspect ratios and roundness are accurate,statistically significant and practical.Therefore,the DIP method is suitable for sand particle shape characterization.展开更多
The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of tal...The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.展开更多
We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light in...We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light intensity disturbance(LID)are also suppressed,the same as those in the traditional arctan-DSM algorithm.Moreover,the lowest sampling frequency is also reduced by introducing anti-aliasing filter,so the occupation of the system memory is reduced.The simulations show that the improved algorithm can correctly demodulate cosine signal and chirp signal with lower sampling frequency.展开更多
Optical fiber acceleration seismometer as an important instrument can offer high sensitivity, anti-jamming and non-touched advantage which has an extensive application field. Its signal processing ability will decide ...Optical fiber acceleration seismometer as an important instrument can offer high sensitivity, anti-jamming and non-touched advantage which has an extensive application field. Its signal processing ability will decide whole system’s performance to some extent because it will affect directly the factors such as resolving power, precision and dynamic range. The signal processing is usually realized by analog circuits which was more inferior in stability, flexibility and anti-jamming to digital processing system. A digital processing system of optical fiber acceleration seismometer has been designed based on the embedded system design scheme. Synthetic-heterodyne demodulation has been studied, and signal processing has been realized. The double processors of ARM and DSP are employed to implement respectively the system control and signal processing, and to provide the output interfaces such as LCD, DAC and Ethernet interface. This system can vary with the measured signal in real time and linearly, and its work frequency bandwidth is between 10Hz and 1kHz. The system has better anti-jamming ability and can work normally when the SNR is 40dB.展开更多
Digital factory technology is an advanced manufacturing technology served as to establish a bridge between the process of product development and manufacturing.In terms of application for digital factory technology in...Digital factory technology is an advanced manufacturing technology served as to establish a bridge between the process of product development and manufacturing.In terms of application for digital factory technology in machining,especially in machining of a complicated part such as a cylinder body part,a concept of digital process planning and its framework are proposed.Its components including machining domain knowledge model,machining knowledge base,machining resource base and process planning system are studied.A machining knowledge model in tree form and an object-driven knowledge reasoning mechanism are used for machining knowledge base.The process planning system is a user interface that leads a planner to finish the planning process.A case about a cylinder head part is given to demonstrate how the platform works.The framework of digital process planning is the foundation of some intelligent CAPP systems and helps to production line planning.展开更多
Neuron PSD (proportion, sum and differentiation) controller has the ability of on-line change of weights to reach the purpose of regulating parameters of PID using neuron’s self-studying and self-organization and the...Neuron PSD (proportion, sum and differentiation) controller has the ability of on-line change of weights to reach the purpose of regulating parameters of PID using neuron’s self-studying and self-organization and the change of controlled plant, which overcomes the disadvantages of affecting a conventional PID’s accurate regulation because of the change of load, model and non-linearity. LF2407 DSP can reach the purpose of parallel running by using multi-sets of bus. So it can greatly increase operation speed and offer a set of flexible instruction system. The realization of PSD control on DSP can build an ideal electrical machine controller.展开更多
基金Project supported by the Fundamental Research Funds for the Central Universities,China
文摘Casting blast can greatly reduce the stripping cost and improve the production capacity of opencast coal mines. Key technologies including high bench blasting, inclined hole, millisecond blasting, pre-splitting blasting and casting blast parameters determination which have influence on the effect of casting blast have been researched with the combination of the ballistic theory and experience in mines. The integrated digital processing system of casting blast was developed in order to simplify the design process of casting blast, improve working efficiency and veracity of design result and comprehensively adopt the software programming method and the theory of casting blast. This system has achieved five functions, namely, the 3D visualization graphics management, the intelligent management of geological information, the intelligent design of casting blast, the analysis and prediction of the blasting effect and the automatic output of the design results. Long-term application in opencast coal mines has shown that research results can not only reduce the specific explosive consumption and improve the blasting effect, but also have high value of popularization and application.
文摘Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.
文摘A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation subsystem. A non-contact measurement method based on digital image processing is introduced to improve measurement of specimen deformation. Based on the method, a series of conventional tri-axial compression tests under diverse stress paths are done. Then an elasto-plastic constitutive model of soil is acquired through the numerical method of modeling constitutive law for geomaterial. Two examples of specimen deformation and ground subsidence are presented and discussed. It indicated that this method can rationally simulate the stress-strain relationship of soil, which reflects the effect of stress path on soil stress-strain relationship.
基金Russian Foundation for Basic Research(RFBR)(No.12-02-90425)
文摘On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.
文摘The ESS software package is prepared for electrical data processing in the fields of coal prospecting, hydrogeologicai engineering, and can be used in the other fields of electrical data processing. It can be operated on any kind of microcomputer which has an internal memories of more than 512kB.The ESS software package would be leading the office operation to an automatic data processing period and the field work free from the tedious, repeated data treating and mapping, so that the engineers would have more time to analyse and interpret field data. Undoubtedly, it is of benefit to improving the relibility of the geological evaluation.
基金supported by the National Natural Science Foundation of China(No.11975290)。
文摘The heavy-ion accelerator facility(HIAF)under construction in China will produce various stable and intense radioactive beams with energies ranging from MeV/u to GeV/u.The ion-linac(iLinac)accelerator,which will serve as the injector for the HIAF,is a superconducting heavy-ion accelerator containing 13 cryomodules.It will operate in either continuous wave mode or pulsed mode,with a beam current ranging from 0.01 to 1 emA.The beam position monitor(BPM)is crucial for this high-beam-power machine,which requires precise beam control and a very small beam loss of less than 1 W/m,especially inside the cryomodules of this unique beam instrument.Nearly 70 BPMs will be installed on the iLinac.New digital beam position and phase measurement(DBPPM)electronics based on a heterogeneous multiprocessing platform system-on-chip(MPSoC)has been developed to provide accurate beam trajectory and phase measurements as well as beam interlocking signals for a fast machine protection system(MPS).The DBPPM comprises an analog front-end(AFE)board in field programmable gate array(FPGA)mezzanine-connector(FMC)form factor,along with a digital signal processing board housed within a “2U 19”chassis.To mitigate radio frequency(RF)leakage effects from high-power RF systems in certain scenarios,beam signals undergo simultaneous processing at both fundamental and second-harmonic frequencies.A dynamic range from-65 dBm to 0 dBm was established to accommodate both weak beam commissioning and high-intensity operational demands.Laboratory tests demonstrated that at input power levels exceeding-45 d Bm,the phase resolution surpasses 0.05°,and the position resolution exceeds 5μm.These results align well with the stipulated measurement requirements.Moreover,the newly developed DBPPM has self-testing and self-calibration functions that are highly helpful for the systematic evaluation of numerous electronic components and fault diagnosis equipment.In addition,the DBPPM electronics implements a 2D nonlinear polynomial correction on the FPGA and can collect accurate real-time position measurements at large beam offsets.This newly developed DBPPM electronics has been applied to several Linac machines,and the results from beam measurements show high performance,good long-term stability,and high reliability.In this paper,a detailed overview of the architecture,performance,and proof-of-principle measurement of the beams is presented.
基金supported by the National Natural Science Foundation of China(Nos.51972079 and 52302062)the National Key Research and Development Program of China(Nos.2022YFB370630202 and 2022YFB3706305).
文摘Electronic 3D printing possesses a remarkable molding ability and convenience in integrated circuits,flexible wearables,and individual automobile requirements.However,traditional 3D printing technology still struggles to meet the demands of high precision and high efficiency in the process of fabricating a curved surface circuit,particularly achieving precise silver circuit molding on irregular substrates.Here,a high-precision and muti-scaled conformal manufacturing method for silver circuits is presented through the digital light processing(DLP)of ultraviolet-curable silver paste(UV-SP)with adjustable photocuring properties,enabling the successful preparation of micro-scaled conductive structure on the sharply skewed hook face.The minimum modeling depth and width of the cured silver paste can be well controlled to 10 and 88µm,respectively.Compared with traditional printing technology,the printing efficiency of complex patterns has increased by over 70%.The printed silver circuit demonstrates an exceptionally high electrical conductivity,reaching as high as 1.16×10^(7) S/m.Additionally,the UV-SP exhibits significant manufacturing efficiency and superior molding resolution compared to conventional direct ink writing and inkjet printing techniques,thereby contributing to the attainment of high precision and efficiency of conformal and micro-molding manufacturing in sensors,communication antennas,and other electronic devices based on curved substrates.
基金supported by National Natural Science Foundation of China(Grant Nos.52205231,52205196)Taishan Scholars Program,and Research Project of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai(Grant Nos.AMGM0613,AMGM0620).
文摘Digital light processing(DLP)is widely used in ceramic additive manufacturing.However,it remains unexplored for metals.In this study,the regulatory mechanisms of the microstructure and mechanical properties of AISI 316L stainless steel were investigated by optimizing a DLP-compatible metal slurry formulation and sintering process.A photosensitive resin system(mass ratio of 5:1:2:2 for U600,LA,ACMO,and HDDA,respectively)with 88 wt%solid content is designed to achieve a slurry with balanced rheology,photocurability,and low pyrolysis residue.Compared to vacuum sintering,which leads to brittle fracture of material,the Ar/H2 mixed gas(5%H2)effectively reduces carbon and oxygen impurities via reduction,mitigating carbide and oxide segregation at grain boundaries and within grains,thereby enhancing strength-ductility.In addition,the prolonged high-temperature sintering inducesδ-ferrite precipitation at grain boundaries,which fills residual pores to improve densification obviously.Under optimized sintering conditions(Ar/H2,1380°C,6 h),the material achieves 96.2%relative density with tensile strength and fracture elongation of 543.5 MPa and 58.7%,respectively,exhibiting uniform dimple-dominated fracture morphology.This synergistic optimization of the slurry formulation and sintering parameters improves the strength-ductility balance in DLP-fabricated metal materials,offering theoretical and technical insights for the additive manufacturing of complex high-performance metal components.
基金funded by the National Natural Science Foundation of China NSFC,U22A2005 and 62201033theYoung Elite Scientists Sponsorship Program of CIC 2021QNRC001。
文摘An adaptive dispersion estimation(ADE)is proposed to compensate dispersion and estimate the transfer function of the fiber channel with GerchbergSaxton(G-S)algorithm,using the stochastic gradient descent(SGD)method in the intensity-modulation and direct-detection(IM-DD)system,improving the tolerance of the algorithm to chromatic dispersion(CD).In order to address the divergence arising from the perturbation in the amplitude of the received signal caused by the filtering effect of the non-ideal channels,a channel-compensation equalizer(CCE)derived from the back-to-back(BTB)scenario is employed at the transmitter to make the amplitude of the received signal depicting the CD effect more accurately.The simulation results demonstrate the essentiality of CCE for the convergence and performance improvement of the G-S algorithm.Results show that it supports 112Gb/s four-level pulse amplitude modulation(PAM4)over 100 km standard single-mode fiber(SSMF)transmission under the 7%forward error correction(FEC)threshold of 3.8E-3.Besides,ADE improves the tolerance to wavelength drift from about 4 nm to 42 nm,and there is a better tolerance for fiber distance perturbation,indicating the G-S algorithm and its derived algorithms with the ADE scheme exhibit superior robustness to the perturbation in the system.
文摘Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.
基金This research was supported by the Department of Mining Engineering at the University of Utah.In addition,the lead author wishes to acknowledge the financial support received from the Talent Introduction Project,part of the Elite Program of Shandong University of Science and Technology(No.0104060540171).
文摘This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.
基金Foundation item: Project(2009AA04Z143) supported by the National High Technology Research and Development Program of ChinaProject (E2011203004) supported by Natural Science Foundation of Hebei Province, ChinaProjects(2011BAF15B03, 2011BAF15B02) supported by the National Science Plan of China
文摘A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing （DSP） shape signal processing board and the shape control model. Based on the shape detecting principle, the shape detecting roller is designed with a new integral structure for improving the precision of shape detecting and avoiding scratching strip surface. Based on the DSP technology, the DSP shape signal processing circuit board is designed and embedded in the shape detecting system for the reliability and stability of shape signal processing. The shape detecting system was successfully used in Angang 1 250 mm HC 6-high reversible cold rolling mill. The precision of shape detecting is 0.2 I and the shape deviation is controlled within 6 1 after the close loop shape control is input.
基金Project(2021YFF0500200) supported by the National Key R&D Program of ChinaProject(52105437) supported by the National Natural Science Foundation of China+1 种基金Project(202006120184) supported by the Heilongjiang Provincial Postdoctoral Science Foundation,ChinaProject(LBH-Z20054) supported by the China Scholarship Council。
文摘The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.
文摘Since Pulse Code Modulation emerged in 1937, digitized speech has experienced rapid development due to its outstanding voice quality, reliability, robustness and security in communication. But how to reduce channel width without loss of speech quality remains a crucial problem in speech coding theory. A new full-duplex digital speech communication system based on the Vocoder of AMBE-1000(TM) and microcontroller ATMEL 89C51 is introduced. It shows higher voice quality than current mobile phone system with only a quarter of channel width needed for the latter. The prospective areas in which the system can be applied include satellite communication, IP Phone, virtual meeting and the most important, defence industry.
基金The National Key Research and Development Program of China(No.2017YFB0310100)the National Natural Science Foundation of China(No.51978318)。
文摘To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of sand were measured to characterize particle form.The area and perimeter were measured to characterize particle angularity.The results of the DIP method and Vernier caliper were compared to examine the accuracy of the DIP method.The sample size test was conducted to show the statistical significance of shape results measured by the DIP method.The practicality of the DIP method was verified by instance analysis.The results show that aspect ratios and roundness measured by the DIP method are equal to ones by the Vernier caliper.Results by DIP are dependent on the sand particle number,and at least 350 particles should be measured to represent the overall shape property of sand.The results show that the DIP method is able to distinguish the differences in the shape of sand particles.It achieves the direct measurement of sand particle thickness,and the characterization results of sand aspect ratios and roundness are accurate,statistically significant and practical.Therefore,the DIP method is suitable for sand particle shape characterization.
基金Project(2013BAB06B00) supported by the National Key Technology R&D Programof ChinaProject(2011CB013504) supported by the National Basic Research Program of ChinaProject(50911130366) supported by the National Natural Science Foundation of China
文摘The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.
文摘We present an all-digital demodulation system of interferometric fiber optic sensor based on an improved arctangent-differential-self-multiplying(arctan-DSM)algorithm.The total harmonic distortion(THD)and the light intensity disturbance(LID)are also suppressed,the same as those in the traditional arctan-DSM algorithm.Moreover,the lowest sampling frequency is also reduced by introducing anti-aliasing filter,so the occupation of the system memory is reduced.The simulations show that the improved algorithm can correctly demodulate cosine signal and chirp signal with lower sampling frequency.
文摘Optical fiber acceleration seismometer as an important instrument can offer high sensitivity, anti-jamming and non-touched advantage which has an extensive application field. Its signal processing ability will decide whole system’s performance to some extent because it will affect directly the factors such as resolving power, precision and dynamic range. The signal processing is usually realized by analog circuits which was more inferior in stability, flexibility and anti-jamming to digital processing system. A digital processing system of optical fiber acceleration seismometer has been designed based on the embedded system design scheme. Synthetic-heterodyne demodulation has been studied, and signal processing has been realized. The double processors of ARM and DSP are employed to implement respectively the system control and signal processing, and to provide the output interfaces such as LCD, DAC and Ethernet interface. This system can vary with the measured signal in real time and linearly, and its work frequency bandwidth is between 10Hz and 1kHz. The system has better anti-jamming ability and can work normally when the SNR is 40dB.
文摘Digital factory technology is an advanced manufacturing technology served as to establish a bridge between the process of product development and manufacturing.In terms of application for digital factory technology in machining,especially in machining of a complicated part such as a cylinder body part,a concept of digital process planning and its framework are proposed.Its components including machining domain knowledge model,machining knowledge base,machining resource base and process planning system are studied.A machining knowledge model in tree form and an object-driven knowledge reasoning mechanism are used for machining knowledge base.The process planning system is a user interface that leads a planner to finish the planning process.A case about a cylinder head part is given to demonstrate how the platform works.The framework of digital process planning is the foundation of some intelligent CAPP systems and helps to production line planning.
文摘Neuron PSD (proportion, sum and differentiation) controller has the ability of on-line change of weights to reach the purpose of regulating parameters of PID using neuron’s self-studying and self-organization and the change of controlled plant, which overcomes the disadvantages of affecting a conventional PID’s accurate regulation because of the change of load, model and non-linearity. LF2407 DSP can reach the purpose of parallel running by using multi-sets of bus. So it can greatly increase operation speed and offer a set of flexible instruction system. The realization of PSD control on DSP can build an ideal electrical machine controller.
