A two-dimensional （2D） fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma （CCP） reactor. The plasma–wall interaction ...A two-dimensional （2D） fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma （CCP） reactor. The plasma–wall interaction （including the deposition） is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.展开更多
In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key...In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design （CAD） techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project ＂Jig Intelligent CAD （JiglCAD） System＂.展开更多
The microstructure and corrosion resistance of Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy with different processing conditions were investigated.The composition was detected by X-ray fluorescence(XRF),and the microstructure was an...The microstructure and corrosion resistance of Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy with different processing conditions were investigated.The composition was detected by X-ray fluorescence(XRF),and the microstructure was analyzed by optical microscopy(OM)and scanning electron microscope(SEM)equipped with energy-dispersive spectroscopy(EDS).The corrosion behavior was investigated by hydrogen evolution tests,weight loss tests and electrochemical measurements.The Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy has much better corrosion resistance compared with the commercial AZ31 sheet,which can be attributed to its dispersive second phases and protective corrosion products film on the alloy surface.Moreover,the as-rolled Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy shows much better corrosion resistance compared with the as-extruded Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy.This can be due to three aspects:The as-rolled alloy has smaller grain size;the as-rolled alloy has lower(1010)/(1120)texture intensity;the residual stress of the as-rolled alloy is eliminated during the annealing process,but large residual stress exists in the asextruded alloy produced by the extrusion process.展开更多
Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphol...Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm～100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃～180℃with KOH concentration of 8 mol/L～12 mol/L.展开更多
The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melte...The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melted, annealed and sintered alloys.The results demonstrate that the Gd5Si2Ge2 alloys obtained under different processing conditions possess distinct magneto-caloric effect due to their various microstructures.Proper annealing treatment can enhance the magneto-caloric effect of the alloy remarkably.While the sintered alloy bears relatively lower value of magnetic entropy change ( △ SM) than arc-melted one.The magnetic entropy change of the annealed Gd5 Si2Ge2 alloy arrives the arrives the maximum value of - △SM = 15.29 J· kg-1· K-1 for magnetic field change under 2.0 T in the present work.展开更多
A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little wi...A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little with air pressure from 0.2 MPa to 0.5 MPa, and the number of tangles has a maximum value with yarn speed changing. For two yarn directions of entering and leaving yarn guide of interalcer, the yarn speed for the maximum number of tangles is 400 m/rain and 600 m/rain, respectively. The number of tangles changes with air pressure and yarn speed for two yarn directions is compared.展开更多
The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found ma...The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.展开更多
Under steady-state conditions, the general currents of EE reactions at disk,hemispherical and spherical microelectrodes are derived.From these equations, some electrode reaction parameters can be very simply obtained.
The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mai...The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mainly on geometric condition rp/d0, little on tube material properties and friction condition; the relative gap △/2rp of double-walled tubes obtained decreases with Increasing rp/d0, and there is a parameter k for a given to/do or rp/t0, when rp/d0 >k, △/2rp< 1, otherwise △/2rp>1.展开更多
The porous A1-Cu alloy was prepared by the gelcasting process. And the effects of gelcasting conditions, such as monomer, the volume ratio of cross-linker and monomer, dispersant and redox initiating system on the hei...The porous A1-Cu alloy was prepared by the gelcasting process. And the effects of gelcasting conditions, such as monomer, the volume ratio of cross-linker and monomer, dispersant and redox initiating system on the height, gelling time and the quality of green body were investigated. （It was found that the dispersant and monomer played significant roles in the height and quality of green bodies, respectively.） The optimal conditions were 10% monomer, 2% cross-linker, 0.2% initiator （volume fraction）, and 1.2 g dispersant, in which the green body exhibited the best quality. The mechanisms of process conditions in eliminating the cracks and forming the pores of in the five stages were proposed. Mercury porosimetry provided a description of pore diameter ranging from 10 to 10000 nm and open porosity of 38.78 %.展开更多
[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extractio...[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extraction method was used to extract polysaccharides from U. fissa E. Pritz. Besides,comparison was made for the effects of extraction time,extraction temperature and solid-to-liquid ratio on the yield rate of polysaccharides from U. fissa E. Pritz. In addition,using the extraction time,extraction temperature and solid-to-liquid ratio as factors,L9( 33) orthogonal experiment was carried out to determine the optimal process parameters for water extraction of polysaccharides from U. fissa E. Pritz.[Results] The optimal process parameters: hot water extraction time was 4 h,the extraction temperature was 90℃,and the mass ratio of water to leaves of U. fissa E. Pritz. was 1∶ 25. Under such extraction conditions,the yield rate of polysaccharides from U. fissa E. Pritz.was up to 11. 611%. [Conclusions]This experiment is expected to provide certain reference for reasonable development and utilization of wild U. fissa E. Pritz. resources in Tibet.展开更多
To investigate the process optimizationof Cu-en/AP composite microspheres preparation via electrostatic spraying,and to reveal the effects of droplet properties and flow rate variations on the experimental results dur...To investigate the process optimizationof Cu-en/AP composite microspheres preparation via electrostatic spraying,and to reveal the effects of droplet properties and flow rate variations on the experimental results during the electrostatic spraying process,the prepared process parameters of Cu-en/AP composite microspheres by electrostatic spray method under the orthogonal experimental design simulated by ANSYS(Fluent).The influence of flow rate,solvent ratio,and solid mass on the experimental results is examined using a controlled variable method.The results indicate that under the conditions of a flow rate of 2.67×10^(-3)kg/s an acetone-to-deionized water ratio of 1.5∶1.0,and a solid mass of 200 mg,the theoretical particle size of the composite microspheres can reach e nanoscale.Droplet trajectories in the electric field remain stable without significant deviation.The simulation results show that particle diameter decreases with increasing flow rate,with the trend leveling off around a flow rate of 1×10^(-3)kg/s.As the solvent ratio increases(with higher acetone content),particle diameter initially decreases,reaching a minimum around a ratio of 1.5∶1.0 before gradually increasing.Increasing the solid mass also reduces the particle diameter,with a linear increase in diameter observed at around 220 mg.Cu-en/AP composite microspheres with nanoscale dimensions were confirmed under these conditions by the final SEM images.展开更多
[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyp...[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.展开更多
Ground condition and construction （excavation and support） time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic est...Ground condition and construction （excavation and support） time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic estimation of ground condition and construction time and costs is proposed, which is an integration of the ground prediction approach based on Markov process, and the time and cost variance analysis based on Monte-Carlo （MC） simulation. The former provides the probabilistic description of ground classification along tunnel alignment according to the geological information revealed from geological profile and boreholes. The latter provides the probabilistic description of the expected construction time and costs for each operation according to the survey feedbacks from experts. Then an engineering application to Hamro tunnel is presented to demonstrate how the ground condition and the construction time and costs are estimated in a probabilistic way. In most items, in order to estimate the data needed for this methodology, a number of questionnaires are distributed among the tunneling experts and finally the mean values of the respondents are applied. These facilitate both the owners and the contractors to be aware of the risk that they should carry before construction, and are useful for both tendering and bidding.展开更多
基金Project supported by the China Postdoctoral Science Foundation (Grant No. 2012M511603)the National Natural Science Foundation of China (Grant Nos. 11105057 and 10775025)+1 种基金the Natural Science Foundation of Hubei Province of China (Grant No. 2007ABA035)the Program for New Century Excellent Talents in University of China (Grant No. NCET-08-0073)
文摘A two-dimensional （2D） fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma （CCP） reactor. The plasma–wall interaction （including the deposition） is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.
基金National High-tech Research and Development Program of China (2007AA041902)
文摘In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design （CAD） techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project ＂Jig Intelligent CAD （JiglCAD） System＂.
基金the National Natural Science Foundation of China(Nos.51671041,51701029 and 51531002)the National Key Research and Development Program of China(No.2016YFB0301100)+2 种基金the Fundamental Research Funds for the Central Universities(No.106112016CDJXZ138811)China Postdoctoral Science Foundation Funded Project(Nos.2017M620410 and 2018T110942)the Chongqing Postdoctoral Scientific Research Foundation(No.Xm2017010)。
文摘The microstructure and corrosion resistance of Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy with different processing conditions were investigated.The composition was detected by X-ray fluorescence(XRF),and the microstructure was analyzed by optical microscopy(OM)and scanning electron microscope(SEM)equipped with energy-dispersive spectroscopy(EDS).The corrosion behavior was investigated by hydrogen evolution tests,weight loss tests and electrochemical measurements.The Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy has much better corrosion resistance compared with the commercial AZ31 sheet,which can be attributed to its dispersive second phases and protective corrosion products film on the alloy surface.Moreover,the as-rolled Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy shows much better corrosion resistance compared with the as-extruded Mg-0.5 Zn-0.2 Ca-0.2 Ce alloy.This can be due to three aspects:The as-rolled alloy has smaller grain size;the as-rolled alloy has lower(1010)/(1120)texture intensity;the residual stress of the as-rolled alloy is eliminated during the annealing process,but large residual stress exists in the asextruded alloy produced by the extrusion process.
文摘Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm～100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃～180℃with KOH concentration of 8 mol/L～12 mol/L.
文摘The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melted, annealed and sintered alloys.The results demonstrate that the Gd5Si2Ge2 alloys obtained under different processing conditions possess distinct magneto-caloric effect due to their various microstructures.Proper annealing treatment can enhance the magneto-caloric effect of the alloy remarkably.While the sintered alloy bears relatively lower value of magnetic entropy change ( △ SM) than arc-melted one.The magnetic entropy change of the annealed Gd5 Si2Ge2 alloy arrives the arrives the maximum value of - △SM = 15.29 J· kg-1· K-1 for magnetic field change under 2.0 T in the present work.
文摘A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little with air pressure from 0.2 MPa to 0.5 MPa, and the number of tangles has a maximum value with yarn speed changing. For two yarn directions of entering and leaving yarn guide of interalcer, the yarn speed for the maximum number of tangles is 400 m/rain and 600 m/rain, respectively. The number of tangles changes with air pressure and yarn speed for two yarn directions is compared.
文摘The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.
文摘Under steady-state conditions, the general currents of EE reactions at disk,hemispherical and spherical microelectrodes are derived.From these equations, some electrode reaction parameters can be very simply obtained.
基金The authors would like to thank NSFC for support toenable the performing of this research (No. 59775055).
文摘The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mainly on geometric condition rp/d0, little on tube material properties and friction condition; the relative gap △/2rp of double-walled tubes obtained decreases with Increasing rp/d0, and there is a parameter k for a given to/do or rp/t0, when rp/d0 >k, △/2rp< 1, otherwise △/2rp>1.
基金Project(51274041) supported by the National Natural Science Foundation of China
文摘The porous A1-Cu alloy was prepared by the gelcasting process. And the effects of gelcasting conditions, such as monomer, the volume ratio of cross-linker and monomer, dispersant and redox initiating system on the height, gelling time and the quality of green body were investigated. （It was found that the dispersant and monomer played significant roles in the height and quality of green bodies, respectively.） The optimal conditions were 10% monomer, 2% cross-linker, 0.2% initiator （volume fraction）, and 1.2 g dispersant, in which the green body exhibited the best quality. The mechanisms of process conditions in eliminating the cracks and forming the pores of in the five stages were proposed. Mercury porosimetry provided a description of pore diameter ranging from 10 to 10000 nm and open porosity of 38.78 %.
基金Supported by Project of Natural Science Foundation of Tibet Autonomous Region(2016ZR-15-31)
文摘[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extraction method was used to extract polysaccharides from U. fissa E. Pritz. Besides,comparison was made for the effects of extraction time,extraction temperature and solid-to-liquid ratio on the yield rate of polysaccharides from U. fissa E. Pritz. In addition,using the extraction time,extraction temperature and solid-to-liquid ratio as factors,L9( 33) orthogonal experiment was carried out to determine the optimal process parameters for water extraction of polysaccharides from U. fissa E. Pritz.[Results] The optimal process parameters: hot water extraction time was 4 h,the extraction temperature was 90℃,and the mass ratio of water to leaves of U. fissa E. Pritz. was 1∶ 25. Under such extraction conditions,the yield rate of polysaccharides from U. fissa E. Pritz.was up to 11. 611%. [Conclusions]This experiment is expected to provide certain reference for reasonable development and utilization of wild U. fissa E. Pritz. resources in Tibet.
基金National Natural Science Foundation of China(No.2275150)。
文摘To investigate the process optimizationof Cu-en/AP composite microspheres preparation via electrostatic spraying,and to reveal the effects of droplet properties and flow rate variations on the experimental results during the electrostatic spraying process,the prepared process parameters of Cu-en/AP composite microspheres by electrostatic spray method under the orthogonal experimental design simulated by ANSYS(Fluent).The influence of flow rate,solvent ratio,and solid mass on the experimental results is examined using a controlled variable method.The results indicate that under the conditions of a flow rate of 2.67×10^(-3)kg/s an acetone-to-deionized water ratio of 1.5∶1.0,and a solid mass of 200 mg,the theoretical particle size of the composite microspheres can reach e nanoscale.Droplet trajectories in the electric field remain stable without significant deviation.The simulation results show that particle diameter decreases with increasing flow rate,with the trend leveling off around a flow rate of 1×10^(-3)kg/s.As the solvent ratio increases(with higher acetone content),particle diameter initially decreases,reaching a minimum around a ratio of 1.5∶1.0 before gradually increasing.Increasing the solid mass also reduces the particle diameter,with a linear increase in diameter observed at around 220 mg.Cu-en/AP composite microspheres with nanoscale dimensions were confirmed under these conditions by the final SEM images.
基金Supported by Doctoral Start-up Fund of Guangxi Minzu Normal University(2021 BS003).
文摘[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.
文摘Ground condition and construction （excavation and support） time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic estimation of ground condition and construction time and costs is proposed, which is an integration of the ground prediction approach based on Markov process, and the time and cost variance analysis based on Monte-Carlo （MC） simulation. The former provides the probabilistic description of ground classification along tunnel alignment according to the geological information revealed from geological profile and boreholes. The latter provides the probabilistic description of the expected construction time and costs for each operation according to the survey feedbacks from experts. Then an engineering application to Hamro tunnel is presented to demonstrate how the ground condition and the construction time and costs are estimated in a probabilistic way. In most items, in order to estimate the data needed for this methodology, a number of questionnaires are distributed among the tunneling experts and finally the mean values of the respondents are applied. These facilitate both the owners and the contractors to be aware of the risk that they should carry before construction, and are useful for both tendering and bidding.
