The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effe...The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.展开更多
Ag/γ-Al2O3 is a kind of promising catalyst with the relatively lower cost compared with those using noble metals,good resistance against catalytic poisoning and excellent behaviour for NOx removal.In the present stud...Ag/γ-Al2O3 is a kind of promising catalyst with the relatively lower cost compared with those using noble metals,good resistance against catalytic poisoning and excellent behaviour for NOx removal.In the present study,Ag/γ-Al2O3 catalysts were synthesized by the solvothermal process and characterized by XRD,TG?DTA,TEM,UV?Vis and FT?IR.It was found that high-performance Ag/γ-Al2O3 catalysts could be synthesized by properly selecting starting materials,controlling the composition of solvent and other reaction conditions.The microstructure evolution of the catalysts was also discussed.展开更多
CeO2-promoted Ni/Al2O3-ZrO2 （Ni/Al2O3-ZrO2-CeO2） catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared s...CeO2-promoted Ni/Al2O3-ZrO2 （Ni/Al2O3-ZrO2-CeO2） catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy （IR）, thermal gravimetric analysis （TGA）, microscopic analysis, X-ray diffraction （XRD） and temperature-programmed reduction （TPR）. The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.展开更多
One of the main challenges in the design and operation of catalytic reactors for reactions with multiple paths/steps is the occurrence of undesirable reactions and products. In these cases, two main factors need to be...One of the main challenges in the design and operation of catalytic reactors for reactions with multiple paths/steps is the occurrence of undesirable reactions and products. In these cases, two main factors need to be considered in the reactor performance: the “conversion” of the feed and the “selectivity” of the process, which is the conversion split between the desired and the undesired products. In this work, a comprehensive model is developed and used to assess the impact of pore-size distribution (PSD) on both conversion and selectivity in series catalytic reactions. In particular, the evaluation considers the effects of various combinations of micro- and macro-porosity, the potential advantages of radial variation of the porosity in the catalyst pellets, and the effect of pellet size. Results show that, for series reactions, when the formation of the desired product is followed by an undesirable degradation reaction, higher porosity in pellets, particularly in the micro-range, gives higher overall conversion, but lowers selectivity towards the formation of the desired product. Selectivity in these pellets can be improved by using a non-uniform PSD that provides a radial gradient of effective diffusivity in pellets increasing from the center to the outer pellet surface. The pellet size also has a significant effect, and larger pellets show lower selectivity in most cases. In general, conversion and selectivity trends move in opposite directions with changes in PSD and the pore structural properties of pellets. Therefore, finding the optimum design of pellets is an optimization process that requires process modeling. Consequently, selecting the best catalyst properties involves optimization, and the needed tool is a comprehensive mathematical model that takes into account the details of mass transport and reaction kinetics in the catalyst pellets. Our primary objective has been the development of a flexible mathematical model that would be applicable to a wide range of conditions and can be used as a design tool and an optimization platform.展开更多
文摘The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.
基金Supported by a Grant-in-Aid for the COE project,Giant Molecules and Complex Systems2004,Ministry of Education,Culture,Sports,Science and Technology of Japan.National Natural Scientific Foundation of China(No.50174050)
文摘Ag/γ-Al2O3 is a kind of promising catalyst with the relatively lower cost compared with those using noble metals,good resistance against catalytic poisoning and excellent behaviour for NOx removal.In the present study,Ag/γ-Al2O3 catalysts were synthesized by the solvothermal process and characterized by XRD,TG?DTA,TEM,UV?Vis and FT?IR.It was found that high-performance Ag/γ-Al2O3 catalysts could be synthesized by properly selecting starting materials,controlling the composition of solvent and other reaction conditions.The microstructure evolution of the catalysts was also discussed.
基金supported by the National Natural Science Foundation of China (NO. 20976013, 21006057)
文摘CeO2-promoted Ni/Al2O3-ZrO2 （Ni/Al2O3-ZrO2-CeO2） catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy （IR）, thermal gravimetric analysis （TGA）, microscopic analysis, X-ray diffraction （XRD） and temperature-programmed reduction （TPR）. The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.
文摘One of the main challenges in the design and operation of catalytic reactors for reactions with multiple paths/steps is the occurrence of undesirable reactions and products. In these cases, two main factors need to be considered in the reactor performance: the “conversion” of the feed and the “selectivity” of the process, which is the conversion split between the desired and the undesired products. In this work, a comprehensive model is developed and used to assess the impact of pore-size distribution (PSD) on both conversion and selectivity in series catalytic reactions. In particular, the evaluation considers the effects of various combinations of micro- and macro-porosity, the potential advantages of radial variation of the porosity in the catalyst pellets, and the effect of pellet size. Results show that, for series reactions, when the formation of the desired product is followed by an undesirable degradation reaction, higher porosity in pellets, particularly in the micro-range, gives higher overall conversion, but lowers selectivity towards the formation of the desired product. Selectivity in these pellets can be improved by using a non-uniform PSD that provides a radial gradient of effective diffusivity in pellets increasing from the center to the outer pellet surface. The pellet size also has a significant effect, and larger pellets show lower selectivity in most cases. In general, conversion and selectivity trends move in opposite directions with changes in PSD and the pore structural properties of pellets. Therefore, finding the optimum design of pellets is an optimization process that requires process modeling. Consequently, selecting the best catalyst properties involves optimization, and the needed tool is a comprehensive mathematical model that takes into account the details of mass transport and reaction kinetics in the catalyst pellets. Our primary objective has been the development of a flexible mathematical model that would be applicable to a wide range of conditions and can be used as a design tool and an optimization platform.
