Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）,...Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）, and then the injection profiles are significantly modified. At present, research on gelled particles is mainly focused on laboratory studies of drive mechanisms, and rarely on mathematical models describing the blocking process of gelled particles. In this paper, the blocking process of gelled particles is divided into two sub-processes： deposition and desorption due to particle deformation. A mathematical model based on filtration theory is proposed considering the effect of characteristics of gelled particles on the blocking process. Blocking laws were simulated and researched using the mathematical model. Results of the simulation of the blocking of gelled particles are quite consistent with the experimental results, which confirms the reliability of the mathematical model developed.展开更多
The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been...The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been used to quantitatively examine the microstructural changes and the amount of porosity occurring at different Sr levels and pressure parameters. The results indicate that an increase in the filling pressure induces lower heat dissipation of the liquid close to the die/core surfaces, with the formation of slightly greater dendrite arms and coarser eutectic Si particles. On the other hand, the increase in the Sr level leads to finer microstructural scale and eutectic Si. The analysed variables, within the experimental conditions, do not affect the morphology of eutectic Si particles. Higher applied pressure and Sr content generate castings with lower amount of porosiW. However, as the filling pressure increases the flow of metal inside the die cavity is more turbulent, leading to the formation of oxide films and cold shots. In the analysed range of experimental conditions, the design of experiment methodology and the analysis of variance have been used to develop statistical models that accurately predict the average size of secondary dendrite arm spacing and the amount of porosity in the low-pressure die cast AISiTMg0.3 alloy.展开更多
Effect of several complex inoculants on mechanical properties, process-ability and sensibility of grey cast iron used in cylinder block were investigated. The experimental results showed that the grey cast iron treate...Effect of several complex inoculants on mechanical properties, process-ability and sensibility of grey cast iron used in cylinder block were investigated. The experimental results showed that the grey cast iron treated with 60%FeSi75+40%RE complex inoculants has tensile strength consistently at about 295 MPa along with good hardness and improved metallurgy quality. While the grey cast iron inoculated with 20%FeSi75+80%Sr compound inoculants has the best process-ability, the lowest cross-section sensibility and the least microhardness difference. The wear amount of the drill increases correspondingly with the increase of the microhardness difference of matrix structure, indicating the great effect of homogeneousness of matrix structure in the grey cast iron on the machinability of the grey cast iron.展开更多
BACKGROUND The midpoint transverse process to pleura(MTP)block,a novel technique for thoracic paravertebral block(TPVB),was first employed in laparoscopic renal cyst decortication.CASE SUMMARY Thoracic paravertebral n...BACKGROUND The midpoint transverse process to pleura(MTP)block,a novel technique for thoracic paravertebral block(TPVB),was first employed in laparoscopic renal cyst decortication.CASE SUMMARY Thoracic paravertebral nerve block is frequently employed for perioperative analgesia during laparoscopic cyst decortication.To address safety concerns associated with TPVBs,we administered MTP blocks in two patients prior to administering general anesthesia for laparoscopic cyst decortication.The MTP block was performed at the T9 level under ultrasound guidance,with 20 mL of 0.5%ropivacaine injected.Reduced sensation to cold and pinprick was observed from the T8 to T11 dermatome levels.Immediately postoperative Numeric Pain Rating Scale scores were 0/10 at rest and on movement,with none exceeding a mean 24 h numeric rating scale>3.CONCLUSION MTP block was effective technique for providing postoperative analgesia for patients undergoing laparoscopic renal cyst decortication.展开更多
Quality traceability plays an essential role in assembling and welding offshore platform blocks.The improvement of the welding quality traceability system is conducive to improving the durability of the offshore platf...Quality traceability plays an essential role in assembling and welding offshore platform blocks.The improvement of the welding quality traceability system is conducive to improving the durability of the offshore platform and the process level of the offshore industry.Currently,qualitymanagement remains in the era of primary information,and there is a lack of effective tracking and recording of welding quality data.When welding defects are encountered,it is difficult to rapidly and accurately determine the root cause of the problem from various complexities and scattered quality data.In this paper,a composite welding quality traceability model for offshore platform block construction process is proposed,it contains the quality early-warning method based on long short-term memory and quality data backtracking query optimization algorithm.By fulfilling the training of the early-warning model and the implementation of the query optimization algorithm,the quality traceability model has the ability to assist enterprises in realizing the rapid identification and positioning of quality problems.Furthermore,the model and the quality traceability algorithm are checked by cases in actual working conditions.Verification analyses suggest that the proposed early-warningmodel for welding quality and the algorithmfor optimizing backtracking requests are effective and can be applied to the actual construction process.展开更多
With the L-P approximate method(variation of parameter method), a barotropic channel model in β-plane is used to study the effect of nonlinear interaction between two waves with different scales on the formation of b...With the L-P approximate method(variation of parameter method), a barotropic channel model in β-plane is used to study the effect of nonlinear interaction between two waves with different scales on the formation of blocking. The approximate analytical solution, which can describe the process of the blocking formation, maintenance and breakdown, has been obtained by using the method of aproximate expansion. The importance of nonlinear interaction between two waves with different scales is stressed in the solution. The result suggests that the nonlinear interaction is the main dynamic process of the blocking formation. Some required conditions of blocking formation are also discussed.展开更多
The Pb isotope compositions of K-feldspar in granites is paid more and more geologists'attention,due to their importance of tracer.It is a fact that South Dabie Block(SDB)and North Dabie Block(NDB)had exited since...The Pb isotope compositions of K-feldspar in granites is paid more and more geologists'attention,due to their importance of tracer.It is a fact that South Dabie Block(SDB)and North Dabie Block(NDB)had exited since Indosinian epoch(Wang et al.,1992;Cong et al,1994;Zhai et al.,1995;Chen et al.1995;Zhang et al,1996,Wang et al,1997).However,the welding process between SDB展开更多
Many applications require the solution of large nonsymmetric linear systems with multiple right hand sides. Instead of applying an iterative method to each of these systems individually, it is often more efficient to...Many applications require the solution of large nonsymmetric linear systems with multiple right hand sides. Instead of applying an iterative method to each of these systems individually, it is often more efficient to use a block version of the method that generates iterates for all the systems simultaneously. In this paper, we propose a block version of generalized minimum backward (GMBACK) for solving large multiple nonsymmetric linear systems. The new method employs the block Arnoldi process to construct a basis for the Krylov subspace K m(A, R 0) and seeks X m∈X 0+K m(A, R 0) to minimize the norm of the perturbation to the data given in A.展开更多
Mountain hazards with large masses of rock blocks in motion – such as rock falls, avalanches and landslides – threaten human lives and structures. Dynamic fragmentation is a common phenomenon during the movement pro...Mountain hazards with large masses of rock blocks in motion – such as rock falls, avalanches and landslides – threaten human lives and structures. Dynamic fragmentation is a common phenomenon during the movement process of rock blocks in rock avalanche, due to the high velocity and impacts against obstructions. In view of the energy consumption theory for brittle rock fragmentation proposed by Bond, which relates energy to size reduction, a theoretical model is proposed to estimate the average fragment size for a moving rock block when it impacts against an obstruction. Then, different forms of motion are studied, with various drop heights and slope angles for the moving rock block. The calculated results reveal that the average fragment size decreases as the drop height increases, whether for free-fall or for a sliding or rolling rock block, and the decline in size is rapid for low heights and slow for increasing heights in the corresponding curves. Moreover, the average fragment size also decreases as the slope angle increases for a slidingrock block. In addition, a rolling rock block has a higher degree of fragmentation than a sliding rock block, even for the same slope angle and block volume. Finally, to compare with others' results, the approximate number of fragments is estimated for each calculated example, and the results show that the proposed model is applicable to a relatively isotropic moving rock block.展开更多
In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. Ho...In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. However, the inter-block interference （IBI） and inter-carrier interference （ICI） in an OFDM system affect the performance. To mitigate IBI and ICI, some pre-processing approaches have been proposed based on full channel state information （CSI）, which improved the system performance. A pre-processing filter based on partial CSI at the transmitter is designed and investigated. The filter coefficient is given by the optimization processing, the symbol error rate （SER） is tested, and the computation complexity of the proposed scheme is analyzed. Computer simulation results show that the proposed pre-processing filter can effectively mitigate IBI and ICI and the performance can be improved. Compared with pre-processing approaches at the transmitter based on full CSI, the proposed scheme has high spectral efficiency, limited CSI feedback and low computation complexity.展开更多
This paper introduced a bootstrap method called truncated geometric bootstrap method for time series stationary process. We estimate the parameters of a geometric distribution which has been truncated as a probability...This paper introduced a bootstrap method called truncated geometric bootstrap method for time series stationary process. We estimate the parameters of a geometric distribution which has been truncated as a probability model for the bootstrap algorithm. This probability model was used in resampling blocks of random length, where the length of each blocks has a truncated geometric distribution. The method was able to determine the block sizes b and probability p attached to its random selections. The mean and variance were estimated for the truncated geometric distribution and the bootstrap algorithm developed based on the proposed probability model.展开更多
基金supported by the National HighTechnology Research and Development Program of China(863 Program)(2007AA06Z214)"Taishan Scholars"Construction Project(No.ts20070704).
文摘Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）, and then the injection profiles are significantly modified. At present, research on gelled particles is mainly focused on laboratory studies of drive mechanisms, and rarely on mathematical models describing the blocking process of gelled particles. In this paper, the blocking process of gelled particles is divided into two sub-processes： deposition and desorption due to particle deformation. A mathematical model based on filtration theory is proposed considering the effect of characteristics of gelled particles on the blocking process. Blocking laws were simulated and researched using the mathematical model. Results of the simulation of the blocking of gelled particles are quite consistent with the experimental results, which confirms the reliability of the mathematical model developed.
文摘The effects of Sr addition and pressure increase on the microstructure and casting defects of a low-pressure die cast （LPDC） AISi7Mg0.3 alloy have been studied. Metallographic and image analysis techniques have been used to quantitatively examine the microstructural changes and the amount of porosity occurring at different Sr levels and pressure parameters. The results indicate that an increase in the filling pressure induces lower heat dissipation of the liquid close to the die/core surfaces, with the formation of slightly greater dendrite arms and coarser eutectic Si particles. On the other hand, the increase in the Sr level leads to finer microstructural scale and eutectic Si. The analysed variables, within the experimental conditions, do not affect the morphology of eutectic Si particles. Higher applied pressure and Sr content generate castings with lower amount of porosiW. However, as the filling pressure increases the flow of metal inside the die cavity is more turbulent, leading to the formation of oxide films and cold shots. In the analysed range of experimental conditions, the design of experiment methodology and the analysis of variance have been used to develop statistical models that accurately predict the average size of secondary dendrite arm spacing and the amount of porosity in the low-pressure die cast AISiTMg0.3 alloy.
基金The paper is supported by the key Science and Technology Project of Henan Province(0424290064) the fund items of Henan Province Natural Science( 0411050100).
文摘Effect of several complex inoculants on mechanical properties, process-ability and sensibility of grey cast iron used in cylinder block were investigated. The experimental results showed that the grey cast iron treated with 60%FeSi75+40%RE complex inoculants has tensile strength consistently at about 295 MPa along with good hardness and improved metallurgy quality. While the grey cast iron inoculated with 20%FeSi75+80%Sr compound inoculants has the best process-ability, the lowest cross-section sensibility and the least microhardness difference. The wear amount of the drill increases correspondingly with the increase of the microhardness difference of matrix structure, indicating the great effect of homogeneousness of matrix structure in the grey cast iron on the machinability of the grey cast iron.
基金Supported by Self-funded Research Projects of Guangxi Zhuang Autonomous Region Health Commission of China,No.Z20210063。
文摘BACKGROUND The midpoint transverse process to pleura(MTP)block,a novel technique for thoracic paravertebral block(TPVB),was first employed in laparoscopic renal cyst decortication.CASE SUMMARY Thoracic paravertebral nerve block is frequently employed for perioperative analgesia during laparoscopic cyst decortication.To address safety concerns associated with TPVBs,we administered MTP blocks in two patients prior to administering general anesthesia for laparoscopic cyst decortication.The MTP block was performed at the T9 level under ultrasound guidance,with 20 mL of 0.5%ropivacaine injected.Reduced sensation to cold and pinprick was observed from the T8 to T11 dermatome levels.Immediately postoperative Numeric Pain Rating Scale scores were 0/10 at rest and on movement,with none exceeding a mean 24 h numeric rating scale>3.CONCLUSION MTP block was effective technique for providing postoperative analgesia for patients undergoing laparoscopic renal cyst decortication.
基金funded by Ministry of Industry and Information Technology of the People’s Republic of China[Grant No.2018473].
文摘Quality traceability plays an essential role in assembling and welding offshore platform blocks.The improvement of the welding quality traceability system is conducive to improving the durability of the offshore platform and the process level of the offshore industry.Currently,qualitymanagement remains in the era of primary information,and there is a lack of effective tracking and recording of welding quality data.When welding defects are encountered,it is difficult to rapidly and accurately determine the root cause of the problem from various complexities and scattered quality data.In this paper,a composite welding quality traceability model for offshore platform block construction process is proposed,it contains the quality early-warning method based on long short-term memory and quality data backtracking query optimization algorithm.By fulfilling the training of the early-warning model and the implementation of the query optimization algorithm,the quality traceability model has the ability to assist enterprises in realizing the rapid identification and positioning of quality problems.Furthermore,the model and the quality traceability algorithm are checked by cases in actual working conditions.Verification analyses suggest that the proposed early-warningmodel for welding quality and the algorithmfor optimizing backtracking requests are effective and can be applied to the actual construction process.
文摘With the L-P approximate method(variation of parameter method), a barotropic channel model in β-plane is used to study the effect of nonlinear interaction between two waves with different scales on the formation of blocking. The approximate analytical solution, which can describe the process of the blocking formation, maintenance and breakdown, has been obtained by using the method of aproximate expansion. The importance of nonlinear interaction between two waves with different scales is stressed in the solution. The result suggests that the nonlinear interaction is the main dynamic process of the blocking formation. Some required conditions of blocking formation are also discussed.
文摘The Pb isotope compositions of K-feldspar in granites is paid more and more geologists'attention,due to their importance of tracer.It is a fact that South Dabie Block(SDB)and North Dabie Block(NDB)had exited since Indosinian epoch(Wang et al.,1992;Cong et al,1994;Zhai et al.,1995;Chen et al.1995;Zhang et al,1996,Wang et al,1997).However,the welding process between SDB
文摘Many applications require the solution of large nonsymmetric linear systems with multiple right hand sides. Instead of applying an iterative method to each of these systems individually, it is often more efficient to use a block version of the method that generates iterates for all the systems simultaneously. In this paper, we propose a block version of generalized minimum backward (GMBACK) for solving large multiple nonsymmetric linear systems. The new method employs the block Arnoldi process to construct a basis for the Krylov subspace K m(A, R 0) and seeks X m∈X 0+K m(A, R 0) to minimize the norm of the perturbation to the data given in A.
基金supported by the National Natural Science Foundation of China (41472272, 41225011)the Youth Science and Technology Fund of Sichuan Province (2016JQ0011)the Opening Fund of the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection (Chengdu University of Technology) (SKLGP2013K015)
文摘Mountain hazards with large masses of rock blocks in motion – such as rock falls, avalanches and landslides – threaten human lives and structures. Dynamic fragmentation is a common phenomenon during the movement process of rock blocks in rock avalanche, due to the high velocity and impacts against obstructions. In view of the energy consumption theory for brittle rock fragmentation proposed by Bond, which relates energy to size reduction, a theoretical model is proposed to estimate the average fragment size for a moving rock block when it impacts against an obstruction. Then, different forms of motion are studied, with various drop heights and slope angles for the moving rock block. The calculated results reveal that the average fragment size decreases as the drop height increases, whether for free-fall or for a sliding or rolling rock block, and the decline in size is rapid for low heights and slow for increasing heights in the corresponding curves. Moreover, the average fragment size also decreases as the slope angle increases for a slidingrock block. In addition, a rolling rock block has a higher degree of fragmentation than a sliding rock block, even for the same slope angle and block volume. Finally, to compare with others' results, the approximate number of fragments is estimated for each calculated example, and the results show that the proposed model is applicable to a relatively isotropic moving rock block.
基金supported by the National Natural Science Foundation of China(60902045)the National High-Tech Research and Developmeent Program of China(863 Program)(2011AA01A105)
文摘In order to meet the demands for high transmission rates and high service quality in broadband wireless communication systems, orthogonal frequency division multiplexing （OFDM） has been adopted in some standards. However, the inter-block interference （IBI） and inter-carrier interference （ICI） in an OFDM system affect the performance. To mitigate IBI and ICI, some pre-processing approaches have been proposed based on full channel state information （CSI）, which improved the system performance. A pre-processing filter based on partial CSI at the transmitter is designed and investigated. The filter coefficient is given by the optimization processing, the symbol error rate （SER） is tested, and the computation complexity of the proposed scheme is analyzed. Computer simulation results show that the proposed pre-processing filter can effectively mitigate IBI and ICI and the performance can be improved. Compared with pre-processing approaches at the transmitter based on full CSI, the proposed scheme has high spectral efficiency, limited CSI feedback and low computation complexity.
文摘This paper introduced a bootstrap method called truncated geometric bootstrap method for time series stationary process. We estimate the parameters of a geometric distribution which has been truncated as a probability model for the bootstrap algorithm. This probability model was used in resampling blocks of random length, where the length of each blocks has a truncated geometric distribution. The method was able to determine the block sizes b and probability p attached to its random selections. The mean and variance were estimated for the truncated geometric distribution and the bootstrap algorithm developed based on the proposed probability model.
