一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network act...Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.展开更多
[Objectives]To optimize the optimal extraction process of Qingdu Jianpi Mixture.[Methods]Taking water addition ratio,extraction time and extraction times as process investigation factors,psoralen content,astilbin cont...[Objectives]To optimize the optimal extraction process of Qingdu Jianpi Mixture.[Methods]Taking water addition ratio,extraction time and extraction times as process investigation factors,psoralen content,astilbin content and dry extract yield as evaluation indicators,the main influencing factors and level range of the extraction process of Qingdu Jianpi Mixture were determined on the basis of single factor test method,and the optimal weight coefficient was screened by AHP-entropy method mixed with weighting method.Combined with L_(9)(3^(4))orthogonal experiment,the best extraction process was obtained.At the same time,thin-layer chromatographic identification was used to identify Ficus simplicissima Lour.and Smilax glabra Roxb.in the medicinal liquid.[Results]The best extraction process:add 1:12 water to the prescription decoction pieces,extract under reflux for 2 times,1.5 h per time,and combine the filtrate to 250 mL.Thin layer chromatography analysis showed that the spots of Ficus simplicissima Lour.and Smilax glabra Roxb.in the medicinal solution were the same as those of reference substances at the corresponding positions,and the negative control had no interference.[Conclusions]The experimental method is reasonable and feasible,and the process is reliable,which can provide experimental reference for the subsequent application of in-hospital preparations and research and development of Qingdu Jianpi Mixture.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operato...Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金Technology Development Program of Jilin Province(YDZJ202201ZYTS640)the National Key Research and Development Program of China(2022YFB4200400)funded by MOST+4 种基金the National Natural Science Foundation of China(52172048 and 52103221)Shandong Provincial Natural Science Foundation(ZR2021QB024 and ZR2021ZD06)Guangdong Basic and Applied Basic Research Foundation(2023A1515012323,2023A1515010943,and 2024A1515010023)the Qingdao New Energy Shandong Laboratory open Project(QNESL OP 202309)the Fundamental Research Funds of Shandong University.
文摘Recently published in Joule,Feng Liu and colleagues from Shanghai Jiaotong University reported a record-breaking 20.8%power conversion efficiency in organic solar cells(OSCs)with an interpenetrating fibril network active layer morphology,featuring a bulk p-in structure and proper vertical segregation achieved through additive-assisted layer-by-layer deposition.This optimized hierarchical gradient fibrillar morphology and optical management synergistically facilitates exciton diffusion,reduces recombination losses,and enhances light capture capability.This approach not only offers a solution to achieving high-efficiency devices but also demonstrates the potential for commercial applications of OSCs.
基金Supported by Huang Ruisong's National Famous Old Traditional Chinese Medicine Expert Inheritance Studio Construction Project[GuoZhongYiYaoRenJiaoHan(2022)75]Hospital Pharmacy Research Project of Guangxi Pharmaceutical Association(GXYXH-202404)+4 种基金2024 Youth Science Fund Project of International Zhuang Medical Hospital(2024GZYJKT005)High-level Traditional Chinese Medicine Key Discipline Construction Project of National Administration of Traditional Chinese Medicine(ZYYZDXK-2023165)National Old Pharmaceutical Workers Inheritance Studio Construction Project of National Administration of Traditional Chinese Medicine[GuoZhongYiYaoRenJiaoHan(2024)255]Talent Cultivation Project-"Young Crop Project"of International Zhuang Medical Hospital Affiliated to Guangxi University of Chinese Medicine(2022001)Guangxi Traditional Chinese Medicine Multidisciplinary Innovation Team Project(GZKJ2309).
文摘[Objectives]To optimize the optimal extraction process of Qingdu Jianpi Mixture.[Methods]Taking water addition ratio,extraction time and extraction times as process investigation factors,psoralen content,astilbin content and dry extract yield as evaluation indicators,the main influencing factors and level range of the extraction process of Qingdu Jianpi Mixture were determined on the basis of single factor test method,and the optimal weight coefficient was screened by AHP-entropy method mixed with weighting method.Combined with L_(9)(3^(4))orthogonal experiment,the best extraction process was obtained.At the same time,thin-layer chromatographic identification was used to identify Ficus simplicissima Lour.and Smilax glabra Roxb.in the medicinal liquid.[Results]The best extraction process:add 1:12 water to the prescription decoction pieces,extract under reflux for 2 times,1.5 h per time,and combine the filtrate to 250 mL.Thin layer chromatography analysis showed that the spots of Ficus simplicissima Lour.and Smilax glabra Roxb.in the medicinal solution were the same as those of reference substances at the corresponding positions,and the negative control had no interference.[Conclusions]The experimental method is reasonable and feasible,and the process is reliable,which can provide experimental reference for the subsequent application of in-hospital preparations and research and development of Qingdu Jianpi Mixture.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金support of the“Pioneer”and“Leading Goose”Research&Development Program of Zhejiang(2024C01028)the State Key Laboratory of Industrial Control Technology,China(ICT2024C04)are gratefully acknowledged.
文摘Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
