Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer r...The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.展开更多
To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt b...To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
A VDMOS integrated in a 170V scan-driver chip of a plasma display panel （PDP） is described,which is based on epitaxial bipolar-CMOS-DMOS （BCD） technology. Some key considerations and parameters of the design are d...A VDMOS integrated in a 170V scan-driver chip of a plasma display panel （PDP） is described,which is based on epitaxial bipolar-CMOS-DMOS （BCD） technology. Some key considerations and parameters of the design are discussed. The thickness of epitaxial layer is 17μm, the area of a single VDMOS structure cell is 324μm^2, and only 18 photoetching steps are needed in the development process. It is also compatible with standard CMOS, bipo- lar,and p-LDMOS devices. The breakdown voltage of VDMOS in the process control module （PCM） is more than 200V. Five kinds of VDMOS modules are integrated in 64 channel PDP scan-driver IC, and on-line system verifica- tion is done on a LG-model-42v6 PDP.展开更多
Objective:The purpose of this study was to explore the function and gene expression regulation of the newly identified lnc RNA DPP10-AS1 in lung cancer,and its potential value as a prognostic biomarker.Methods:q RT-PC...Objective:The purpose of this study was to explore the function and gene expression regulation of the newly identified lnc RNA DPP10-AS1 in lung cancer,and its potential value as a prognostic biomarker.Methods:q RT-PCR and Western blot were conducted to detect the expression of DDP10-AS1 and DPP10 in lung cancer cell lines and tissues.The effects of DDP10-AS1 on DPP10 expression,cell growth,invasion,apoptosis,and in vivo tumor growth were investigated in lung cancer cells by Western blot,rescue experiments,colony formation,flow cytometry,and xenograft animal experiments.Results:The novel antisense lnc RNA DPP10-AS1 was found to be highly expressed in cancer tissues(P<0.0001),and its upregulation predicted poor prognosis in patients with lung cancer(P=0.0025).Notably,DPP10-AS1 promoted lung cancer cell growth,colony formation,and cell cycle progression,and repressed apoptosis in lung cancer cells by upregulating DPP10 expression.Additionally,DPP10-AS1 facilitated lung tumor growth via upregulation of DPP10 protein in a xenograft mouse model.Importantly,DPP10-AS1 positively regulated DPP10 gene expression,and both were coordinately upregulated in lung cancer tissues.Mechanically,DPP10-AS1 was found to associate with DPP10 m RNA but did not enhance DPP10 m RNA stability.Hypomethylation of DPP10-AS1 and DPP10 contributed to their coordinate upregulation in lung cancer.Conclusions:These findings indicated that the upregulation of the antisense lnc RNA DPP10-AS1 promotes lung cancer malignant processes and facilitates tumorigenesis by epigenetically regulating its cognate sense gene DPP10.DPP10-AS1 may serve as a candidate prognostic biomarker and a potential therapeutic target in lung cancer.展开更多
Deep mantle processes and the dynamic mechanism of magmatism in the Japan Sea Basin are important processes that have not been studied in detail.In this paper,systematic evaluation of basalt samples from the ocean dri...Deep mantle processes and the dynamic mechanism of magmatism in the Japan Sea Basin are important processes that have not been studied in detail.In this paper,systematic evaluation of basalt samples from the ocean drilling program Site 794 in the Japan Sea was performed,which included petrography,whole-rock major-and trace-element analysis,Sr-Nd-Pb isotopic composition,and electron microprobe analysis of plagioclase and clinopyroxene.These basalts belong to the tholeiitic series with porphyritic texture and massive Ca-rich plagioclase,clinopyroxene,and minor olivine phenocrysts.The basalts are characterized as flat rare earth elements and high-field-strength elements with remarkably low ratios of(La/Yb)N(0.75-2.51),significant positive anomalies of Ba,Sr,and Rb and no Eu anomaly(dEn=0.99-1.36).The samples showed relatively high 87Sr/86Sr(0.70425-0.70522),207pb/204pb(15.511-15.610),and 208pb/204pb(38.064-38.557)values and a low 143Nd/144Nd ratio(0.51271-0.51295).The basalts from Site 794 can be divided into upper,middle,and lower volcanic rocks(UVR,MVR,and LVR)on the basis of their stratigraphic level.The MVR was geochemically derived from the depleted mantle,whereas the UVR and LVR originated from a nondepleted and relatively enriched mantle source with contributions from subducted Pacific plate fluid and sediments.Use of geothermobarometers indicates that the crystallization pressure for the UVR and LVR(6.25-11.19 kbar)was significantly higher than that of the MVR(3.48-5.84 kbar).The UVR and LVR may have been derived from the low-degree(5%-10%)partial melting of spinel lherzolite,while the MVR originated from a shallower mantle source with a high degree(10%-20%)of partial melting.In addition,the geochemical characteristics of the samples are consistent with a younger age(13-17 Ma)and the depleted composition of the MVR and an older age(17-23 Ma)and slightly enriched composition of the UVR and LVR.Therefore,temporal changes in the mantle source from old and enriched to young and depleted and subsequently to old and nondepleted may have been associated with progressive lithospheric extension and thinning,as well as at least two episodes of diverse asthenospheric upwelling and pull-apart tectonic motion in the Yamato Basin.展开更多
Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a w...Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).展开更多
Introduction Cationic starches are a series of products of which various sorts with different properties and usages can all be produced via cationic reactions by using different types of etherification agents under di...Introduction Cationic starches are a series of products of which various sorts with different properties and usages can all be produced via cationic reactions by using different types of etherification agents under different conditions. As an additive and strengthening agent,展开更多
Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley a...Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.展开更多
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金supported by the National Natural Science Foundation of China(Grant No.42130312)。
文摘The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.
基金Funded by the National Natural Science Foundation of China(No.52278446)。
文摘To explore the best preparation process for terminal blend(TB)composite-modified asphalt and to filter its formulation with excellent performance,this study evaluates the performance of TB composite modified asphalt by physical property index,microscopic morphology,rheological testing,and infrared spectroscopy on multiple scales.The results show that the best preparation process for TB-modified asphalt is stirring at 260℃ for 4 h at 400 rpm,which significantly reduces the modification time of the asphalt.From a physical property viewpoint,the TB composite-modified asphalt sample with 5% styrene-butadiene-styrene(SBS)+1% aromatics+0.1% sulfur exhibits high-comprehensive,high-and low-temperature properties.More-over,its crosslinked mesh structure comprises black rubber particles uniformly interwoven in the middle,which further enhances the performance of the asphalt and results in an excellent performance formulation.In addition,the sample with 5%SBS content has a higher G*value and smaller δ value than that with 3%SBS content,indicating that its high-temperature resistance is improved.The effect of adding 3%SBS content on the viscoelastic ratio is,to some extent,less than that caused by 20% rubber powder.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
文摘A VDMOS integrated in a 170V scan-driver chip of a plasma display panel （PDP） is described,which is based on epitaxial bipolar-CMOS-DMOS （BCD） technology. Some key considerations and parameters of the design are discussed. The thickness of epitaxial layer is 17μm, the area of a single VDMOS structure cell is 324μm^2, and only 18 photoetching steps are needed in the development process. It is also compatible with standard CMOS, bipo- lar,and p-LDMOS devices. The breakdown voltage of VDMOS in the process control module （PCM） is more than 200V. Five kinds of VDMOS modules are integrated in 64 channel PDP scan-driver IC, and on-line system verifica- tion is done on a LG-model-42v6 PDP.
基金supported in part by research grants from the Non-profit Technology Research Program of Zhejiang(Grant No.LGF18H160006)the Natural Science Foundation of Zhejiang(Grant No.LQ18H200001)+3 种基金the Non-profit Technology Research Program of Ningbo(Grant No.2019C50040)the Natural Science Foundation of Ningbo(Grant No.2018A610204)the Major Project for Science and Technology Innovation 2025 of Ningbo(Grant No.2019B10037)the K.C.Wong Magna Fund at Ningbo University。
文摘Objective:The purpose of this study was to explore the function and gene expression regulation of the newly identified lnc RNA DPP10-AS1 in lung cancer,and its potential value as a prognostic biomarker.Methods:q RT-PCR and Western blot were conducted to detect the expression of DDP10-AS1 and DPP10 in lung cancer cell lines and tissues.The effects of DDP10-AS1 on DPP10 expression,cell growth,invasion,apoptosis,and in vivo tumor growth were investigated in lung cancer cells by Western blot,rescue experiments,colony formation,flow cytometry,and xenograft animal experiments.Results:The novel antisense lnc RNA DPP10-AS1 was found to be highly expressed in cancer tissues(P<0.0001),and its upregulation predicted poor prognosis in patients with lung cancer(P=0.0025).Notably,DPP10-AS1 promoted lung cancer cell growth,colony formation,and cell cycle progression,and repressed apoptosis in lung cancer cells by upregulating DPP10 expression.Additionally,DPP10-AS1 facilitated lung tumor growth via upregulation of DPP10 protein in a xenograft mouse model.Importantly,DPP10-AS1 positively regulated DPP10 gene expression,and both were coordinately upregulated in lung cancer tissues.Mechanically,DPP10-AS1 was found to associate with DPP10 m RNA but did not enhance DPP10 m RNA stability.Hypomethylation of DPP10-AS1 and DPP10 contributed to their coordinate upregulation in lung cancer.Conclusions:These findings indicated that the upregulation of the antisense lnc RNA DPP10-AS1 promotes lung cancer malignant processes and facilitates tumorigenesis by epigenetically regulating its cognate sense gene DPP10.DPP10-AS1 may serve as a candidate prognostic biomarker and a potential therapeutic target in lung cancer.
基金supported by the National Natural Science Foundation of China(Grant code:41476034,41272369,40802038,41320104006,41302102 and 15CX05007A)
文摘Deep mantle processes and the dynamic mechanism of magmatism in the Japan Sea Basin are important processes that have not been studied in detail.In this paper,systematic evaluation of basalt samples from the ocean drilling program Site 794 in the Japan Sea was performed,which included petrography,whole-rock major-and trace-element analysis,Sr-Nd-Pb isotopic composition,and electron microprobe analysis of plagioclase and clinopyroxene.These basalts belong to the tholeiitic series with porphyritic texture and massive Ca-rich plagioclase,clinopyroxene,and minor olivine phenocrysts.The basalts are characterized as flat rare earth elements and high-field-strength elements with remarkably low ratios of(La/Yb)N(0.75-2.51),significant positive anomalies of Ba,Sr,and Rb and no Eu anomaly(dEn=0.99-1.36).The samples showed relatively high 87Sr/86Sr(0.70425-0.70522),207pb/204pb(15.511-15.610),and 208pb/204pb(38.064-38.557)values and a low 143Nd/144Nd ratio(0.51271-0.51295).The basalts from Site 794 can be divided into upper,middle,and lower volcanic rocks(UVR,MVR,and LVR)on the basis of their stratigraphic level.The MVR was geochemically derived from the depleted mantle,whereas the UVR and LVR originated from a nondepleted and relatively enriched mantle source with contributions from subducted Pacific plate fluid and sediments.Use of geothermobarometers indicates that the crystallization pressure for the UVR and LVR(6.25-11.19 kbar)was significantly higher than that of the MVR(3.48-5.84 kbar).The UVR and LVR may have been derived from the low-degree(5%-10%)partial melting of spinel lherzolite,while the MVR originated from a shallower mantle source with a high degree(10%-20%)of partial melting.In addition,the geochemical characteristics of the samples are consistent with a younger age(13-17 Ma)and the depleted composition of the MVR and an older age(17-23 Ma)and slightly enriched composition of the UVR and LVR.Therefore,temporal changes in the mantle source from old and enriched to young and depleted and subsequently to old and nondepleted may have been associated with progressive lithospheric extension and thinning,as well as at least two episodes of diverse asthenospheric upwelling and pull-apart tectonic motion in the Yamato Basin.
基金funded by CONAHCYT grant(252808)to GFCONAHCYT’s“Estancias Posdoctorales por México”program(662350)to HTB。
文摘Recent reports suggest that aging is not solely a physiological process in living beings;instead, it should be considered a pathological process or disease(Amorim et al., 2022). Consequently, this process involves a wide range of factors, spanning from genetic to environmental factors, and even includes the gut microbiome(GM)(Mayer et al., 2022). All these processes coincide at some point in the inflammatory process, oxidative stress, and apoptosis, at different degrees in various organs and systems that constitute a living organism(Mayer et al., 2022;AguilarHernández et al., 2023).
文摘Introduction Cationic starches are a series of products of which various sorts with different properties and usages can all be produced via cationic reactions by using different types of etherification agents under different conditions. As an additive and strengthening agent,
基金supported by the General Program of the National Natural Science Foundation of China(No.52274326)the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202109)the Seventh Batch of Ten Thousand Talents Plan of China(No.ZX20220553).
文摘Sinter is the core raw material for blast furnaces.Flue pressure,which is an important state parameter,affects sinter quality.In this paper,flue pressure prediction and optimization were studied based on the shapley additive explanation(SHAP)to predict the flue pressure and take targeted adjustment measures.First,the sintering process data were collected and processed.A flue pressure prediction model was then constructed after comparing different feature selection methods and model algorithms using SHAP+extremely random-ized trees(ET).The prediction accuracy of the model within the error range of±0.25 kPa was 92.63%.SHAP analysis was employed to improve the interpretability of the prediction model.The effects of various sintering operation parameters on flue pressure,the relation-ship between the numerical range of key operation parameters and flue pressure,the effect of operation parameter combinations on flue pressure,and the prediction process of the flue pressure prediction model on a single sample were analyzed.A flue pressure optimization module was also constructed and analyzed when the prediction satisfied the judgment conditions.The operating parameter combination was then pushed.The flue pressure was increased by 5.87%during the verification process,achieving a good optimization effect.
