Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
With the emergence of general foundational models,such as Chat Generative Pre-trained Transformer(ChatGPT),researchers have shown considerable interest in the potential applications of foundation models in the process...With the emergence of general foundational models,such as Chat Generative Pre-trained Transformer(ChatGPT),researchers have shown considerable interest in the potential applications of foundation models in the process industry.This paper provides a comprehensive overview of the challenges and opportunities presented by the use of foundation models in the process industry,including the frameworks,core applications,and future prospects.First,this paper proposes a framework for foundation models for the process industry.Second,it summarizes the key capabilities of industrial foundation models and their practical applications.Finally,it highlights future research directions and identifies unresolved open issues related to the use of foundation models in the process industry.展开更多
A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary ...A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.展开更多
With the raising complexity of modern civil aircraft,both academy and industry have shown strong interests on MBSE(Model-Based System Engineering).However,following the application of MBSE,the duration of the design p...With the raising complexity of modern civil aircraft,both academy and industry have shown strong interests on MBSE(Model-Based System Engineering).However,following the application of MBSE,the duration of the design phase exceeded expectations.This paper conducted a survey to the relevant participants involved in the design,revealed that a lack of proper process management is a critical issue.The current MBSE methodology does not provide clear guidelines for monitoring,controlling,and managing processes,which are crucial for both efficiency and effectiveness.To address this,the present paper introduced an improved Process Model(PM)within the MBSE framework for civil aircraft design.This improved model incorporates three new Management Blocks(MB):Progress Management Block(PMB),Review Management Block(RMB),and Configuration Management Block(CMB),developed based on the Capability Maturity Model Integration(CMMI).These additions aim to streamline the design process and better align it with engineering practices.The upgraded MBSE method with the improved PM offers a more structured approach to manage complex aircraft design projects,and a case study is conducted to validate its potential to reduce timelines and enhance overall project outcomes.展开更多
Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective...Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective Coriolis condition,the velocity component parallel to the rotational axis exerts no influence on the magnitude of Coriolis acceleration.This circumstance implies a potential mitigation of the Coriolis force's deflective impact.Regrettably,extant investigations predominantly emphasize the dilative and compressive Coriolis effects,largely neglecting the pragmatic import of the deflective Coriolis condition.In pursuit of this gap,a series of discrete element method(DEM)simulations have been conducted to scrutinize the feasibility of centrifugal modelling for dry granular run-out processes under deflective Coriolis conditions.The findings concerning the deflective Coriolis effect reveal a consistent rise in the run-out distance by 2%–16%,a modest increase in bulk flow velocity of under 4%,and a slight elevation in average flow depth by no more than 25%.These alterations display smaller dependence on the specific testing conditions due to the granular flow undergoing dual deflections in opposing directions.This underscores the significance and utility of the deflective Coriolis condition.Notably,the anticipated reduction in error in predicting the final run-out distance is substantial,potentially reaching a 150%improvement compared to predictions made under the dilative and compressive Coriolis conditions.Therefore,the deflective Coriolis condition is advised when the final run-out distance of the granular flow is the main concern.To mitigate the impact of Coriolis acceleration,a greater initial height of the granular column is recommended,with a height/width ratio exceeding 1,as the basal friction of the granular material plays a crucial role in mitigating the deflective Coriolis effect.For more transverse-uniform flow properties,the width of the granular column should be as large as possible.展开更多
Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)mo...Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)model to represent allowable variations of the CSTR-DC-recycle chemical processes.The NOZ is a geometric space containing all safe operating points of the CSTR-DC-recycle chemical processes,so that it is an effective model for process monitoring.The novelty of the proposed method is to establish the NOZ model based on boundary points.The boundary points make it possible to capture the actual geometric space irrespective of the space shape.In contrast,existing methods represent the NOZ of processes by fixed mathematical models such as ellipsoidal and convex-hull models;they are not suitable for the CSTR-DC-recycle chemical processes whose NOZs cannot be exactly defined by fixed mathematical structures.Simulated case studies based on Aspen Hysys software are given to illustrate the proposed method.展开更多
With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Alth...With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Although distributed streaming data processing frameworks such asApache Flink andApache Spark Streaming provide solutions,meeting stringent response time requirements while ensuring high throughput and resource utilization remains an urgent problem.To address this,the study proposes a formal modeling approach based on Performance Evaluation Process Algebra(PEPA),which abstracts the core components and interactions of cloud-based distributed streaming data processing systems.Additionally,a generic service flow generation algorithmis introduced,enabling the automatic extraction of service flows fromthe PEPAmodel and the computation of key performance metrics,including response time,throughput,and resource utilization.The novelty of this work lies in the integration of PEPA-based formal modeling with the service flow generation algorithm,bridging the gap between formal modeling and practical performance evaluation for IoT systems.Simulation experiments demonstrate that optimizing the execution efficiency of components can significantly improve system performance.For instance,increasing the task execution rate from 10 to 100 improves system performance by 9.53%,while further increasing it to 200 results in a 21.58%improvement.However,diminishing returns are observed when the execution rate reaches 500,with only a 0.42%gain.Similarly,increasing the number of TaskManagers from 10 to 20 improves response time by 18.49%,but the improvement slows to 6.06% when increasing from 20 to 50,highlighting the importance of co-optimizing component efficiency and resource management to achieve substantial performance gains.This study provides a systematic framework for analyzing and optimizing the performance of IoT systems for large-scale real-time streaming data processing.The proposed approach not only identifies performance bottlenecks but also offers insights into improving system efficiency under different configurations and workloads.展开更多
Accurate retrieval of casting 3D models is crucial for process reuse.Current methods primarily focus on shape similarity,neglecting process design features,which compromises reusability.In this study,a novel deep lear...Accurate retrieval of casting 3D models is crucial for process reuse.Current methods primarily focus on shape similarity,neglecting process design features,which compromises reusability.In this study,a novel deep learning retrieval method for process reuse was proposed,which integrates process design features into the retrieval of casting 3D models.This method leverages the comparative language-image pretraining(CLIP)model to extract shape features from the three views and sectional views of the casting model and combines them with process design features such as modulus,main wall thickness,symmetry,and length-to-height ratio to enhance process reusability.A database of 230 production casting models was established for model validation.Results indicate that incorporating process design features improves model accuracy by 6.09%,reaching 97.82%,and increases process similarity by 30.25%.The reusability of the process was further verified using the casting simulation software EasyCast.The results show that the process retrieved after integrating process design features produces the least shrinkage in the target model,demonstrating this method’s superior ability for process reuse.This approach does not require a large dataset for training and optimization,making it highly applicable to casting process design and related manufacturing processes.展开更多
This study systematically investigates the hot deformation behavior and microstructural evolution of CoNiV medium-entropy alloy(MEA)in the temperature range of 950-1100℃ and strain rates of 0.001-1 s^(-1).The Arrheni...This study systematically investigates the hot deformation behavior and microstructural evolution of CoNiV medium-entropy alloy(MEA)in the temperature range of 950-1100℃ and strain rates of 0.001-1 s^(-1).The Arrhenius model and machine learning model were developed to forecast flow stresses at various conditions.The predictive capability of both models was assessed using the coefficients of determination(R^(2)),average absolute relative error(AARE),and root mean square error(RMSE).The findings show that the osprey optimization algorithm convolutional neural network(OOA-CNN)model outperforms the Arrhenius model,achieving a high R^(2) value of 0.99959 and lower AARE and RMSE values.The flow stress that the OOA-CNN model predicted was used to generate power dissipation maps and instability maps under different strains.Finally,combining the processing map and microstructure characterization,the ideal processing domain was identified as 1100℃ at strain rates of 0.01-0.1 s^(-1).This study provided key insights into optimizing the hot working process of CoNiV MEA.展开更多
The textile industry,while creating material wealth,also exerts a significant impact on the environment.Particularly in the textile manufacturing phase,which is the most energy-intensive phase throughout the product l...The textile industry,while creating material wealth,also exerts a significant impact on the environment.Particularly in the textile manufacturing phase,which is the most energy-intensive phase throughout the product lifecycle,the problem of high energy usage is increasingly notable.Nevertheless,current analyses of carbon emissions in textile manufacturing emphasize the dynamic temporal characteristics while failing to adequately consider critical information such as material flows and energy consumption.A carbon emission analysis method based on a holographic process model(HPM)is proposed to address these issues.First,the system boundary in the textile manufacturing is defined,and the characteristics of carbon emissions are analyzed.Next,an HPM based on the object-centric Petri net(OCPN)is constructed,and simulation experiments are conducted on three different scenarios in the textile manufacturing.Subsequently,the constructed HPM is utilized to achieve a multi-perspective analysis of carbon emissions.Finally,the feasibility of the method is verified by using the production data of pure cotton products from a certain textile manufacturing enterprise.The results indicate that this method can analyze the impact of various factors on the carbon emissions of pure cotton product production,and by applying targeted optimization strategies,carbon emissions have been reduced by nearly 20%.This contributes to propelling the textile manufacturing industry toward sustainable development.展开更多
The Madden-Julian Oscillation(MJO)is a key atmospheric component connecting global weather and climate.It func-tions as a primary source for subseasonal forecasts.Previous studies have highlighted the vital impact of ...The Madden-Julian Oscillation(MJO)is a key atmospheric component connecting global weather and climate.It func-tions as a primary source for subseasonal forecasts.Previous studies have highlighted the vital impact of oceanic processes on MJO propagation.However,few existing MJO prediction approaches adequately consider these factors.This study determines the critical region for the oceanic processes affecting MJO propagation by utilizing 22-year Climate Forecast System Reanalysis data.By intro-ducing surface and subsurface oceanic temperature within this critical region into a lagged multiple linear regression model,the MJO forecasting skill is considerably optimized.This optimization leads to a 12 h enhancement in the forecasting skill of the first principal component and efficiently decreases prediction errors for the total predictions.Further analysis suggests that,during the years in which MJO events propagate across the Maritime Continent over a more southerly path,the optimized statistical forecasting model obtains better improvements in MJO prediction.展开更多
During the excavation of deep engineering,high in situ stress is one prominent feature that often causes instability in the vicinity of underground openings.The propagation and coalescence of cracks in the surrounding...During the excavation of deep engineering,high in situ stress is one prominent feature that often causes instability in the vicinity of underground openings.The propagation and coalescence of cracks in the surrounding rock are characterized by anisotropy under a true triaxial stress state and play a crucial role in the development of stress-induced engineering disasters.Thus,a three-dimensional anisotropic fracturing model of hard rock is proposed to interpret fracturing activities and evaluate the mechanical property deterioration under complex stress conditions.This anisotropic fracturing model is derived from the evolution of microcracks and attributes the inelastic deformation of hard rock to crack propagation and coalescence.Through analyzing the competitive process of crack propagation in different orientations,the stress-induced anisotropic fracturing characteristics and the post-peak brittle-ductile transition could be revealed.Finally,the accuracy and effectiveness of this model are validated.Results show that this proposed anisotropic fracturing model can elucidate the primary characteristics observed in triaxial compression tests,which offers a fresh perspective on comprehending the failure process of hard rock.展开更多
This study compared the predictive performance and processing speed of an artificial neural network(ANN)and a hybrid of a numerical reservoir simulation(NRS)and artificial neural network(NRS-ANN)models in estimating t...This study compared the predictive performance and processing speed of an artificial neural network(ANN)and a hybrid of a numerical reservoir simulation(NRS)and artificial neural network(NRS-ANN)models in estimating the oil production rate of the ZH86 reservoir block under waterflood recovery.The historical input variables:reservoir pressure,reservoir pore volume containing hydrocarbons,reservoir pore volume containing water and reservoir water injection rate used as inputs for ANN models.To create the NRS-ANN hybrid models,314 data sets extracted from the NRS model,which included reservoir pressure,reservoir pore volume containing hy-drocarbons,reservoir pore volume containing water and reservoir water injection rate were used.The output of the models was the historical oil production rate(HOPR in m^(3) per day)recorded from the ZH86 reservoir block.Models were developed using MATLAB R2021a and trained with 25 models in three replicate conditions(2,4 and 6),each at 1000 epochs.A comparative analysis indicated that,for all 25 models,the ANN outperformed the NRS-ANN in terms of processing speed and prediction performance.ANN models achieved an average of R^(2) and MAE of 0.8433 and 8.0964 m^(3)/day values,respectively,while NRS-ANN hybrid models achieved an average of R^(2) and MAE of 0.7828 and 8.2484 m^(3)/day values,respectively.In addition,ANN models achieved a processing speed of 49 epochs/sec,32 epochs/sec,and 24 epochs/sec after 2,4,and 6 replicates,respectively.Whereas the NRS-ANN hybrid models achieved lower average processing speeds of 45 epochs/sec,23 epochs/sec and 20 epochs/sec.In addition,the ANN optimal model outperforms the NRS-ANN model in terms of both processing speed and accuracy.The ANN optimal model achieved a speed of 336.44 epochs/sec,compared to the NRS-ANN hybrid optimal model,which achieved a speed of 52.16 epochs/sec.The ANN optimal model achieved lower RMSE and MAE values of 7.9291 m^(3)/day and 5.3855 m^(3)/day in the validation dataset compared with the hybrid ANS optimal model,which achieved 13.6821 m^(3)/day and 9.2047 m^(3)/day,respectively.The study also showed that the ANN optimal model consistently achieved higher R^(2) values:0.9472,0.9284 and 0.9316 in the training,test and validation data sets.Whereas the NRS-ANN hybrid optimal yielded lower R^(2) values of 0.8030,0.8622 and 0.7776 for the training,testing and validation datasets.The study showed that ANN models are a more effective and reliable tool,as they balance both processing speed and accuracy in estimating the oil production rate of the ZH86 reservoir block under the waterflooding recovery method.展开更多
Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite a...Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
Machine learning-assisted methods for rapid and accurate prediction of temperature field,mushy zone,and grain size were proposed for the heating−cooling combined mold(HCCM)horizontal continuous casting of C70250 alloy...Machine learning-assisted methods for rapid and accurate prediction of temperature field,mushy zone,and grain size were proposed for the heating−cooling combined mold(HCCM)horizontal continuous casting of C70250 alloy plates.First,finite element simulations of casting processes were carried out with various parameters to build a dataset.Subsequently,different machine learning algorithms were employed to achieve high precision in predicting temperature fields,mushy zone locations,mushy zone inclination angle,and billet grain size.Finally,the process parameters were quickly optimized using a strategy consisting of random generation,prediction,and screening,allowing the mushy zone to be controlled to the desired target.The optimized parameters are 1234℃for heating mold temperature,47 mm/min for casting speed,and 10 L/min for cooling water flow rate.The optimized mushy zone is located in the middle of the second heat insulation section and has an inclination angle of roughly 7°.展开更多
A technology of one-stage roughing and one-stage scavenging vanadium pre-concentration with shaking table was investigated for improving vanadium grade and decreasing acid consumption minerals content based on the qua...A technology of one-stage roughing and one-stage scavenging vanadium pre-concentration with shaking table was investigated for improving vanadium grade and decreasing acid consumption minerals content based on the quantitative evaluation of minerals by scanning electronic microscopy （QEMSCAN）. In order to visually illustrate how the vanadium-bearing minerals were separated from system, a loose-stratification model was established with Bagnold shear loose theory and Kelly stratification hypothesis. Through the model, it was inferred that fine fraction and coarse fraction of vanadium-bearing muscovite particles easily became the concentrate in roughing and scavenging stages, respectively. The type of the dominant effect on the loose-stratification was confirmed. In the roughing stage, gravity sedimentation played a leading role in the loose-stratification process. However, in the scavenging stage, shearing dispersion pressure caused by asymmetric motion of table deck took an important part in the loose-stratification process. Finally, the correction of the loose-stratification model was validated by the practical experiment.展开更多
To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the...To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the resource-based view and the complementary resource view, which is comprised of an IT conversion process, an information system （IS） adoption process, an IS use process and a competition process. The application capability of IT plays the critical role, which determines the efficiency and effectiveness of the aforementioned four processes. The process model of IT impacts on firm competitiveness can also be used to explain why, under what situations and how IT can generate positive organizational outcomes, as well as theoretical bases for further empirical study.展开更多
Workflow management is an important aspect in CSCW at present. The elementary knowledge of workflow process is introduced, the Petri nets based process modeling methodology and basic definitions are provided, and the ...Workflow management is an important aspect in CSCW at present. The elementary knowledge of workflow process is introduced, the Petri nets based process modeling methodology and basic definitions are provided, and the analysis and verification of structural and behavioral correctness of workflow process are discussed. Finally, the algorithm of verification of process definitions is proposed.展开更多
To achieve an on-demand and dynamic composition model of inter-organizational business processes, a new approach for business process modeling and verification is introduced by using the pi-calculus theory. A new busi...To achieve an on-demand and dynamic composition model of inter-organizational business processes, a new approach for business process modeling and verification is introduced by using the pi-calculus theory. A new business process model which is multi-role, multi-dimensional, integrated and dynamic is proposed relying on inter-organizational collaboration. Compatible with the traditional linear sequence model, the new model is an M x N multi-dimensional mesh, and provides horizontal and vertical formal descriptions for the collaboration business process model. Finally, the pi-calculus theory is utilized to verify the deadlocks, livelocks and synchronization of the example models. The result shows that the proposed approach is efficient and applicable in inter-organizational business process modeling.展开更多
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
基金supported by the National Natural Science Foundation of China(62225302,623B2014,and 62173023).
文摘With the emergence of general foundational models,such as Chat Generative Pre-trained Transformer(ChatGPT),researchers have shown considerable interest in the potential applications of foundation models in the process industry.This paper provides a comprehensive overview of the challenges and opportunities presented by the use of foundation models in the process industry,including the frameworks,core applications,and future prospects.First,this paper proposes a framework for foundation models for the process industry.Second,it summarizes the key capabilities of industrial foundation models and their practical applications.Finally,it highlights future research directions and identifies unresolved open issues related to the use of foundation models in the process industry.
基金supported by the National Key R&D Program of China(No.2021YFB3400900)the National Natural Science Foundation of China(Nos.52175373,52205435)+1 种基金Natural Science Foundation of Hunan Province,China(No.2022JJ40621)the Innovation Fund of National Commercial Aircraft Manufacturing Engineering Technology Center,China(No.COMACSFGS-2022-1875)。
文摘A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.
基金supported by the National Natural Science Foundation of China(No.62073267)。
文摘With the raising complexity of modern civil aircraft,both academy and industry have shown strong interests on MBSE(Model-Based System Engineering).However,following the application of MBSE,the duration of the design phase exceeded expectations.This paper conducted a survey to the relevant participants involved in the design,revealed that a lack of proper process management is a critical issue.The current MBSE methodology does not provide clear guidelines for monitoring,controlling,and managing processes,which are crucial for both efficiency and effectiveness.To address this,the present paper introduced an improved Process Model(PM)within the MBSE framework for civil aircraft design.This improved model incorporates three new Management Blocks(MB):Progress Management Block(PMB),Review Management Block(RMB),and Configuration Management Block(CMB),developed based on the Capability Maturity Model Integration(CMMI).These additions aim to streamline the design process and better align it with engineering practices.The upgraded MBSE method with the improved PM offers a more structured approach to manage complex aircraft design projects,and a case study is conducted to validate its potential to reduce timelines and enhance overall project outcomes.
基金supported by the National Natural Science Foundation of China(Grant Nos.42120104008 and 42307214)the Postdoctoral Fellowship Program of CPSF(Grant No.GZB20230620).
文摘Coriolis effects,encompassing the dilative,compressive,and deflective manifestations,constitute pivotal considerations in the centrifugal modelling of high-speed granular run-out processes.Notably,under the deflective Coriolis condition,the velocity component parallel to the rotational axis exerts no influence on the magnitude of Coriolis acceleration.This circumstance implies a potential mitigation of the Coriolis force's deflective impact.Regrettably,extant investigations predominantly emphasize the dilative and compressive Coriolis effects,largely neglecting the pragmatic import of the deflective Coriolis condition.In pursuit of this gap,a series of discrete element method(DEM)simulations have been conducted to scrutinize the feasibility of centrifugal modelling for dry granular run-out processes under deflective Coriolis conditions.The findings concerning the deflective Coriolis effect reveal a consistent rise in the run-out distance by 2%–16%,a modest increase in bulk flow velocity of under 4%,and a slight elevation in average flow depth by no more than 25%.These alterations display smaller dependence on the specific testing conditions due to the granular flow undergoing dual deflections in opposing directions.This underscores the significance and utility of the deflective Coriolis condition.Notably,the anticipated reduction in error in predicting the final run-out distance is substantial,potentially reaching a 150%improvement compared to predictions made under the dilative and compressive Coriolis conditions.Therefore,the deflective Coriolis condition is advised when the final run-out distance of the granular flow is the main concern.To mitigate the impact of Coriolis acceleration,a greater initial height of the granular column is recommended,with a height/width ratio exceeding 1,as the basal friction of the granular material plays a crucial role in mitigating the deflective Coriolis effect.For more transverse-uniform flow properties,the width of the granular column should be as large as possible.
基金partially funded by the National Natural Science Foundation of China(62273215)。
文摘Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)model to represent allowable variations of the CSTR-DC-recycle chemical processes.The NOZ is a geometric space containing all safe operating points of the CSTR-DC-recycle chemical processes,so that it is an effective model for process monitoring.The novelty of the proposed method is to establish the NOZ model based on boundary points.The boundary points make it possible to capture the actual geometric space irrespective of the space shape.In contrast,existing methods represent the NOZ of processes by fixed mathematical models such as ellipsoidal and convex-hull models;they are not suitable for the CSTR-DC-recycle chemical processes whose NOZs cannot be exactly defined by fixed mathematical structures.Simulated case studies based on Aspen Hysys software are given to illustrate the proposed method.
基金funded by the Joint Project of Industry-University-Research of Jiangsu Province(Grant:BY20231146).
文摘With the widespread application of Internet of Things(IoT)technology,the processing of massive realtime streaming data poses significant challenges to the computational and data-processing capabilities of systems.Although distributed streaming data processing frameworks such asApache Flink andApache Spark Streaming provide solutions,meeting stringent response time requirements while ensuring high throughput and resource utilization remains an urgent problem.To address this,the study proposes a formal modeling approach based on Performance Evaluation Process Algebra(PEPA),which abstracts the core components and interactions of cloud-based distributed streaming data processing systems.Additionally,a generic service flow generation algorithmis introduced,enabling the automatic extraction of service flows fromthe PEPAmodel and the computation of key performance metrics,including response time,throughput,and resource utilization.The novelty of this work lies in the integration of PEPA-based formal modeling with the service flow generation algorithm,bridging the gap between formal modeling and practical performance evaluation for IoT systems.Simulation experiments demonstrate that optimizing the execution efficiency of components can significantly improve system performance.For instance,increasing the task execution rate from 10 to 100 improves system performance by 9.53%,while further increasing it to 200 results in a 21.58%improvement.However,diminishing returns are observed when the execution rate reaches 500,with only a 0.42%gain.Similarly,increasing the number of TaskManagers from 10 to 20 improves response time by 18.49%,but the improvement slows to 6.06% when increasing from 20 to 50,highlighting the importance of co-optimizing component efficiency and resource management to achieve substantial performance gains.This study provides a systematic framework for analyzing and optimizing the performance of IoT systems for large-scale real-time streaming data processing.The proposed approach not only identifies performance bottlenecks but also offers insights into improving system efficiency under different configurations and workloads.
基金supported by the National Natural Science Foundation of China(Nos.52074246,52275390,52375394)the National Defense Basic Scientific Research Program of China(No.JCKY2020408B002)the Key R&D Program of Shanxi Province(No.202102050201011).
文摘Accurate retrieval of casting 3D models is crucial for process reuse.Current methods primarily focus on shape similarity,neglecting process design features,which compromises reusability.In this study,a novel deep learning retrieval method for process reuse was proposed,which integrates process design features into the retrieval of casting 3D models.This method leverages the comparative language-image pretraining(CLIP)model to extract shape features from the three views and sectional views of the casting model and combines them with process design features such as modulus,main wall thickness,symmetry,and length-to-height ratio to enhance process reusability.A database of 230 production casting models was established for model validation.Results indicate that incorporating process design features improves model accuracy by 6.09%,reaching 97.82%,and increases process similarity by 30.25%.The reusability of the process was further verified using the casting simulation software EasyCast.The results show that the process retrieved after integrating process design features produces the least shrinkage in the target model,demonstrating this method’s superior ability for process reuse.This approach does not require a large dataset for training and optimization,making it highly applicable to casting process design and related manufacturing processes.
基金supported by the National Natural Science Foundation of China(NSFC)(Grant No.51901078)the Central Guidance for Local Scientific and Technological Development Funding Project(Grant No.236Z1003G)+3 种基金the Science and Technology Plan Project of Tangshan City(Grant No.24130207C)the Natural Science Foundation of Hebei Province(Grant No.E2022209070)the High-level Talent Project of Hebei(Grant No.E2019100007)the Open Project Program of Key Laboratory of Ministry of Education for Modern Metallurgy Technology(Grant No.2024YJKF02).
文摘This study systematically investigates the hot deformation behavior and microstructural evolution of CoNiV medium-entropy alloy(MEA)in the temperature range of 950-1100℃ and strain rates of 0.001-1 s^(-1).The Arrhenius model and machine learning model were developed to forecast flow stresses at various conditions.The predictive capability of both models was assessed using the coefficients of determination(R^(2)),average absolute relative error(AARE),and root mean square error(RMSE).The findings show that the osprey optimization algorithm convolutional neural network(OOA-CNN)model outperforms the Arrhenius model,achieving a high R^(2) value of 0.99959 and lower AARE and RMSE values.The flow stress that the OOA-CNN model predicted was used to generate power dissipation maps and instability maps under different strains.Finally,combining the processing map and microstructure characterization,the ideal processing domain was identified as 1100℃ at strain rates of 0.01-0.1 s^(-1).This study provided key insights into optimizing the hot working process of CoNiV MEA.
基金National Key R&D Program of China(No.2019YFB1706300)。
文摘The textile industry,while creating material wealth,also exerts a significant impact on the environment.Particularly in the textile manufacturing phase,which is the most energy-intensive phase throughout the product lifecycle,the problem of high energy usage is increasingly notable.Nevertheless,current analyses of carbon emissions in textile manufacturing emphasize the dynamic temporal characteristics while failing to adequately consider critical information such as material flows and energy consumption.A carbon emission analysis method based on a holographic process model(HPM)is proposed to address these issues.First,the system boundary in the textile manufacturing is defined,and the characteristics of carbon emissions are analyzed.Next,an HPM based on the object-centric Petri net(OCPN)is constructed,and simulation experiments are conducted on three different scenarios in the textile manufacturing.Subsequently,the constructed HPM is utilized to achieve a multi-perspective analysis of carbon emissions.Finally,the feasibility of the method is verified by using the production data of pure cotton products from a certain textile manufacturing enterprise.The results indicate that this method can analyze the impact of various factors on the carbon emissions of pure cotton product production,and by applying targeted optimization strategies,carbon emissions have been reduced by nearly 20%.This contributes to propelling the textile manufacturing industry toward sustainable development.
基金supported by the National Key Program for Developing Basic Science(Nos.2022YFF0801702 and 2022YFE0106600)the National Natural Science Foundation of China(Nos.42175060 and 42175021)the Jiangsu Province Science Foundation(No.BK20250200302).
文摘The Madden-Julian Oscillation(MJO)is a key atmospheric component connecting global weather and climate.It func-tions as a primary source for subseasonal forecasts.Previous studies have highlighted the vital impact of oceanic processes on MJO propagation.However,few existing MJO prediction approaches adequately consider these factors.This study determines the critical region for the oceanic processes affecting MJO propagation by utilizing 22-year Climate Forecast System Reanalysis data.By intro-ducing surface and subsurface oceanic temperature within this critical region into a lagged multiple linear regression model,the MJO forecasting skill is considerably optimized.This optimization leads to a 12 h enhancement in the forecasting skill of the first principal component and efficiently decreases prediction errors for the total predictions.Further analysis suggests that,during the years in which MJO events propagate across the Maritime Continent over a more southerly path,the optimized statistical forecasting model obtains better improvements in MJO prediction.
基金support from the National Natural Science Foundation of China(Grant No.52209125).
文摘During the excavation of deep engineering,high in situ stress is one prominent feature that often causes instability in the vicinity of underground openings.The propagation and coalescence of cracks in the surrounding rock are characterized by anisotropy under a true triaxial stress state and play a crucial role in the development of stress-induced engineering disasters.Thus,a three-dimensional anisotropic fracturing model of hard rock is proposed to interpret fracturing activities and evaluate the mechanical property deterioration under complex stress conditions.This anisotropic fracturing model is derived from the evolution of microcracks and attributes the inelastic deformation of hard rock to crack propagation and coalescence.Through analyzing the competitive process of crack propagation in different orientations,the stress-induced anisotropic fracturing characteristics and the post-peak brittle-ductile transition could be revealed.Finally,the accuracy and effectiveness of this model are validated.Results show that this proposed anisotropic fracturing model can elucidate the primary characteristics observed in triaxial compression tests,which offers a fresh perspective on comprehending the failure process of hard rock.
基金National Natural Science Foundation of China grants no.41972326 and 51774258.
文摘This study compared the predictive performance and processing speed of an artificial neural network(ANN)and a hybrid of a numerical reservoir simulation(NRS)and artificial neural network(NRS-ANN)models in estimating the oil production rate of the ZH86 reservoir block under waterflood recovery.The historical input variables:reservoir pressure,reservoir pore volume containing hydrocarbons,reservoir pore volume containing water and reservoir water injection rate used as inputs for ANN models.To create the NRS-ANN hybrid models,314 data sets extracted from the NRS model,which included reservoir pressure,reservoir pore volume containing hy-drocarbons,reservoir pore volume containing water and reservoir water injection rate were used.The output of the models was the historical oil production rate(HOPR in m^(3) per day)recorded from the ZH86 reservoir block.Models were developed using MATLAB R2021a and trained with 25 models in three replicate conditions(2,4 and 6),each at 1000 epochs.A comparative analysis indicated that,for all 25 models,the ANN outperformed the NRS-ANN in terms of processing speed and prediction performance.ANN models achieved an average of R^(2) and MAE of 0.8433 and 8.0964 m^(3)/day values,respectively,while NRS-ANN hybrid models achieved an average of R^(2) and MAE of 0.7828 and 8.2484 m^(3)/day values,respectively.In addition,ANN models achieved a processing speed of 49 epochs/sec,32 epochs/sec,and 24 epochs/sec after 2,4,and 6 replicates,respectively.Whereas the NRS-ANN hybrid models achieved lower average processing speeds of 45 epochs/sec,23 epochs/sec and 20 epochs/sec.In addition,the ANN optimal model outperforms the NRS-ANN model in terms of both processing speed and accuracy.The ANN optimal model achieved a speed of 336.44 epochs/sec,compared to the NRS-ANN hybrid optimal model,which achieved a speed of 52.16 epochs/sec.The ANN optimal model achieved lower RMSE and MAE values of 7.9291 m^(3)/day and 5.3855 m^(3)/day in the validation dataset compared with the hybrid ANS optimal model,which achieved 13.6821 m^(3)/day and 9.2047 m^(3)/day,respectively.The study also showed that the ANN optimal model consistently achieved higher R^(2) values:0.9472,0.9284 and 0.9316 in the training,test and validation data sets.Whereas the NRS-ANN hybrid optimal yielded lower R^(2) values of 0.8030,0.8622 and 0.7776 for the training,testing and validation datasets.The study showed that ANN models are a more effective and reliable tool,as they balance both processing speed and accuracy in estimating the oil production rate of the ZH86 reservoir block under the waterflooding recovery method.
基金Supported by National Key Research and Development Program(Grant No.2024YFB3312700)National Natural Science Foundation of China(Grant No.52405541)the Changzhou Municipal Sci&Tech Program(Grant No.CJ20241131)。
文摘Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
基金financially supported by the National Key Research and Development Program of China (No. 2023YFB3812601)the National Natural Science Foundation of China (No. 51925401)the Young Elite Scientists Sponsorship Program by CAST, China (No. 2022QNRC001)。
文摘Machine learning-assisted methods for rapid and accurate prediction of temperature field,mushy zone,and grain size were proposed for the heating−cooling combined mold(HCCM)horizontal continuous casting of C70250 alloy plates.First,finite element simulations of casting processes were carried out with various parameters to build a dataset.Subsequently,different machine learning algorithms were employed to achieve high precision in predicting temperature fields,mushy zone locations,mushy zone inclination angle,and billet grain size.Finally,the process parameters were quickly optimized using a strategy consisting of random generation,prediction,and screening,allowing the mushy zone to be controlled to the desired target.The optimized parameters are 1234℃for heating mold temperature,47 mm/min for casting speed,and 10 L/min for cooling water flow rate.The optimized mushy zone is located in the middle of the second heat insulation section and has an inclination angle of roughly 7°.
基金Projects(2011BAB05B01,2011BA05B04)supported by the National Key Technology R&D Program during the 12th Five-year Plan Period,ChinaProject(201271031380)supported by Twilight Plane of Wuhan Youth Science and Technology,China
文摘A technology of one-stage roughing and one-stage scavenging vanadium pre-concentration with shaking table was investigated for improving vanadium grade and decreasing acid consumption minerals content based on the quantitative evaluation of minerals by scanning electronic microscopy （QEMSCAN）. In order to visually illustrate how the vanadium-bearing minerals were separated from system, a loose-stratification model was established with Bagnold shear loose theory and Kelly stratification hypothesis. Through the model, it was inferred that fine fraction and coarse fraction of vanadium-bearing muscovite particles easily became the concentrate in roughing and scavenging stages, respectively. The type of the dominant effect on the loose-stratification was confirmed. In the roughing stage, gravity sedimentation played a leading role in the loose-stratification process. However, in the scavenging stage, shearing dispersion pressure caused by asymmetric motion of table deck took an important part in the loose-stratification process. Finally, the correction of the loose-stratification model was validated by the practical experiment.
基金The National Natural Science Foundation of China(No.70671024).
文摘To investigate the process of information technology （IT） impacts on firm competitiveness, an integrated process model of IT impacts on firm competitiveness is brought forward based on the process-oriented view, the resource-based view and the complementary resource view, which is comprised of an IT conversion process, an information system （IS） adoption process, an IS use process and a competition process. The application capability of IT plays the critical role, which determines the efficiency and effectiveness of the aforementioned four processes. The process model of IT impacts on firm competitiveness can also be used to explain why, under what situations and how IT can generate positive organizational outcomes, as well as theoretical bases for further empirical study.
文摘Workflow management is an important aspect in CSCW at present. The elementary knowledge of workflow process is introduced, the Petri nets based process modeling methodology and basic definitions are provided, and the analysis and verification of structural and behavioral correctness of workflow process are discussed. Finally, the algorithm of verification of process definitions is proposed.
基金The National Natural Science Foundation of China(No60473078)
文摘To achieve an on-demand and dynamic composition model of inter-organizational business processes, a new approach for business process modeling and verification is introduced by using the pi-calculus theory. A new business process model which is multi-role, multi-dimensional, integrated and dynamic is proposed relying on inter-organizational collaboration. Compatible with the traditional linear sequence model, the new model is an M x N multi-dimensional mesh, and provides horizontal and vertical formal descriptions for the collaboration business process model. Finally, the pi-calculus theory is utilized to verify the deadlocks, livelocks and synchronization of the example models. The result shows that the proposed approach is efficient and applicable in inter-organizational business process modeling.
