Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the random...Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the randomness of structural parameters,working condition and vibration environment are considered for fatigue life predication and reliability assessment.First,the lowcycle fatigue problem is modelled as stochastic static system with random parameters,while the high-cycle fatigue problem is considered as stochastic dynamic system under random excitations.Then,to deal with the two failure modes,the novel Direct Probability Integral Method(DPIM)is proposed,which is efficient and accurate for solving stochastic static and dynamic systems.The probability density functions of accumulated damage and fatigue life of turbine blade for low-cycle and high-cycle fatigue problems are achieved,respectively.Furthermore,the time–frequency hybrid method is advanced to enhance the computational efficiency for governing equation of system.Finally,the results of typical examples demonstrate high accuracy and efficiency of the proposed method by comparison with Monte Carlo simulation and other methods.It is indicated that the DPIM is a unified method for predication of random fatigue life for low-cycle and highcycle fatigue problems.The rotational speed,density,fatigue strength coefficient,and fatigue plasticity index have a high sensitivity to fatigue reliability of engine turbine blade.展开更多
Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining ...Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining subsidence using D-InSAR technique and probability integral method. The details of the algorithm are as follows：the control points set, containing correct phase unwrapping points on the subsidence basin edge generated by D-InSAR and several observation points （near the maximum subsidence and inflection points）, was established at first; genetic algorithm （GA） was then used to optimize the parameters of probability integral method; at last, the surface subsidence was deduced according to the optimum parameters. The results of the experiment in Huaibei mining area, China, show that the presented method can generate the correct mining subsidence basin with a few surface observations, and the relative error of maximum subsidence point is about 8.3%, which is much better than that of conventional D-InSAR （relative error is 68.0%）.展开更多
In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is a...In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is affected by more than one mining panel, traditional PIM parameter inversion model is difficult to ensure the reliability of the results due to the complexity of rock movement. With crossover,mutation and selection operators, GA can perform a global optimization search and has high computation efficiency. Compared with the pattern search algorithm, the fitness function can avoid falling into local minima traps. GA reduces the risk of local minima traps which improves the accuracy and reliability with the mutation mechanism. Application at Xuehu colliery shows that GA can be used to inverse the PIM parameters for multi-panel surface movement observation, and reliable results can be obtained. The research provides a new way for back-analysis of PIM parameters for mining subsidence under complex conditions.展开更多
The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathe...The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathematical descriptions,namely,limit state functions of failure modes.Several problems are to be solved in the use of traditional methods for gravity dams.One is how to define the limit state function really reflecting the mechanical mechanism of the failure mode;another is how to understand the relationship among failure modes and enable the probability of the whole structure to be determined.Performing SFP analysis for a gravity dam system is a challenging task.This work proposes a novel nonlinear finite-element-based SFP analysis method for gravity dams.Firstly,reasonable nonlinear constitutive modes for dam concrete,concrete/rock interface and rock foundation are respectively introduced according to corresponding mechanical mechanisms.Meanwhile the response surface(RS) method is used to model limit state functions of main failure modes through the Monte Carlo(MC) simulation results of the dam-interface-foundation interaction finite element(FE) analysis.Secondly,a numerical SFP method is studied to compute the probabilities of several failure modes efficiently by simple matrix integration operations.Then,the nonlinear FE-based SFP analysis methodology for gravity dams considering correlated failure modes with the additional sensitivity analysis is proposed.Finally,a comprehensive computational platform for interfacing the proposed method with the open source FE code Code Aster is developed via a freely available MATLAB software tool(FERUM).This methodology is demonstrated by a case study of an existing gravity dam analysis,in which the dominant failure modes are identified,and the corresponding performance functions are established.Then,the dam failure probability of the structural system is obtained by the proposed method considering the correlation relationship of main failure modes on the basis of the mechanical mechanism analysis with the MC-FE simulations.展开更多
Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced acc...Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced according to numerical analysis theory. After complicated multi-independent variables implicit functional function was simplified to be a single independent variable implicit function and rule of calculating derivative for composite function was combined with principle of the mean deviations method, an approximative solution format of implicit functional function was established through Taylor expansion series and iterative solution approach of reliability degree index was given synchronously. An engineering example was analyzed by the method. The result shows its absolute error is only 0.78% as compared with accurate solution.展开更多
Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction ...Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction method based on conditional probability theory is proposed to solve the sensitivity analysis based on the approximate analytic method.The relevant concepts are introduced to characterize the correlation between failure modes by the reliability index and correlation coefficient,and conditional normal fractile the for the multi-dimensional conditional failure analysis is proposed based on the two-dimensional normal distribution function.Thus the calculation of system failure probability can be represented as a summation of conditional probability terms,which is convenient to be computed by iterative solving sequentially.Further the system sensitivity solution is transformed into the derivation process of the failure probability correlation coefficient of each failure mode.Numerical examples results show that it is feasible to apply the idea of failure mode relevancy to failure probability sensitivity analysis,and it can avoid multi-dimension integral calculation and reduce complexity and difficulty.Compared with the product of conditional marginalmethod,a wider value range of correlation coefficient for reliability analysis is confirmed and an acceptable accuracy can be obtained with less computational cost.展开更多
In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main ...In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main objective is to evaluate the efficiency and accuracy of the methods in separation of anomalies on the shear zone gold mineralization.For this purpose,samples were taken from the secondary lithogeochemical environment(stream sediment samples)on the gold mineralization in Saqqez,NW of Iran.Interpretation of the histograms and diagrams showed that the MPD is capable of identifying two phases of mineralization.The fractal method could separate only one phase of change based on the fractal dimension with high concentration areas of the Au element.The spatial analysis showed two mixed subpopulations after U=0 and another subpopulation with very high U values.The MPD analysis followed spatial analysis,which shows the detail of the variations.Six mineralized zones detected from local geochemical exploration results were used for validating the methods mentioned above.The MPD method was able to identify the anomalous areas higher than 90%,whereas the two other methods identified 60%(maximum)of the anomalous areas.The raw data without any estimation for the concentration was used by the MPD method using aminimum of calculations to determine the threshold values.Therefore,the MPD method is more robust than the other methods.The spatial analysis identified the detail soft hegeological and mineralization events that were affected in the study area.MPD is recommended as the best,and the spatial U-analysis is the next reliable method to be used.The fractal method could show more detail of the events and variations in the area with asymmetrical grid net and a higher density of sampling or at the detailed exploration stage.展开更多
This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is establi...This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is established considering the flexible deformation of the barrel and the interaction between the projectile and the barrel.Subsequently,the accuracy of the dynamic model is verified based on the external ballistic projectile attitude test platform.Furthermore,the probability density evolution method(PDEM)is developed to high-dimensional uncertainty quantification of projectile motion.The engineering example highlights the results of the proposed method are consistent with the results obtained by the Monte Carlo Simulation(MCS).Finally,the influence of parameter uncertainty on the projectile disturbance at muzzle under different working conditions is analyzed.The results show that the disturbance of the pitch angular,pitch angular velocity and pitch angular of velocity decreases with the increase of launching angle,and the random parameter ranges of both the projectile and coupling model have similar influence on the disturbance of projectile angular motion at muzzle.展开更多
In order to study the law of mining subsidence and ground movement, to provide the basis of coal mining under building, railway and water, we used the probability integration method to make comprehensive evaluation of...In order to study the law of mining subsidence and ground movement, to provide the basis of coal mining under building, railway and water, we used the probability integration method to make comprehensive evaluation of ground stability. Take Yingcheng Coal Mine of Jiutai as an example. Mining-induced movement and horizontal movement are analyzed on the basis of the measurement data. The resuhs of prediction can pro- vide reference and basis for prevention of coal mining subsidence and future restoration and treatment.展开更多
This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained...This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.展开更多
In this paper, a new method for seismic hazard analysis, the probability-consistent method based on practical ground surface motion is proposed. Time histories on ground surface in the method correspond to earthquakes...In this paper, a new method for seismic hazard analysis, the probability-consistent method based on practical ground surface motion is proposed. Time histories on ground surface in the method correspond to earthquakes occurring at potential sources around sites. So of the envelope parameter, response spectrum, peak ground acceleration are of physical sense. Neglecting the response of site soil layers, the method is the same as routine probability-consistent method. The natural seismic acceleration time histories can be used for input wave directly. Generating ground motion is an approximation under lack of data of strong motion. Along with accumulating of the strong motion data around sites, we can describe the seismic environment more objectively.展开更多
A new analysis framework based on probability density evolution method(PDEM)and its Chebyshev collocation solution are introduced to predict the dynamic response and short-term extreme load of offshore wind turbine(OW...A new analysis framework based on probability density evolution method(PDEM)and its Chebyshev collocation solution are introduced to predict the dynamic response and short-term extreme load of offshore wind turbine(OWT)towers subjected to random sea state.With regard to the stochastic responses,random function method is employed to generate samples of sea elevation,the probability density evolution equation(PDEE)is solved to calculate time-variant probability density functions of structural responses.For the probabilistic load estimation,a FAST model of NREL 5MW offshore turbine is established to obtain samples of bending moment at the tower base.The equivalent extreme event theory is used to construct a virtual stochastic process(VSP)to assess the short-term extreme load.The results indicate that the proposed approach can predict time-variant probability density functions of the structural responses,and shows good agreement with Monte Carlo simulations.Additionally,the predicted short-term extreme load can capture the fluctuation at the tail of the extreme value distribution,thus is more rational than results from the typical distribution models.Overall,the proposed method shows good adaptation,precision and efficiency for the dynamic response analysis and load estimation of OWT towers.展开更多
In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of i...In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of inflection point offset in subsidence formula has been proved. Lastly, the relevant influence factors about the offset of inflection point have been simply discussed.展开更多
This study proposes a method for calculating the probability distribution of structural responses at different intensities using the endurance time(ET)method.The results can be used to calculate the fragility curve of...This study proposes a method for calculating the probability distribution of structural responses at different intensities using the endurance time(ET)method.The results can be used to calculate the fragility curve of structural collapse.The ET method involves dynamic analysis of a structure under an intensifying record over time.While conventional ET methods can determine the median of the structural response,they lack the ability to calculate its dispersion.To address this limitation,the present study utilizes ET analysis and single-degree-of-freedom(SDOF)systems to develop a method that considers the record-to-record variability for calculating the probability distribution of structural response.The accuracy of this method is evaluated by comparing it with the incremental dynamic analysis(IDA)method using special moment frames.The results demonstrate that the proposed method achieves a reasonably accurate estimation of dispersion while significantly reducing the computational burden(by approximately 95%)compared to the IDA method.展开更多
To get the probability of long span bridges under the influence of external random factors, the Monte Carlo method using Latin hypercube sampling is applied. Combined with the condition assessment system on Runyang Su...To get the probability of long span bridges under the influence of external random factors, the Monte Carlo method using Latin hypercube sampling is applied. Combined with the condition assessment system on Runyang Suspension Bridge, which is the longest suspension bridge in China, the structural probabilities in normal and damaged situations are calculated with the external random factors considered including environmental temperature, wind load, load of vehicles, etc. The main assessment items contain the maximal vertical displacement of girder, the maximal stress of cables, the maximal horizontal displacement of towers etc. Finally, the probabilities and their cumulative distribution functions are provided. The analysis results can be plotted on line in a clear and vivid way, so the efficiency of assessment is increased and the decision-making of maintenance is more objective and accurate.展开更多
针对覆冰输电导线舞动问题,基于概率密度演化法,提出了一种覆冰输电导线起舞概率分析方法。首先,建立了基于临界风速的覆冰输电导线起舞功能函数,结合具有3个平动自由度与1个扭转自由度的三结点索单元的有限元模型与李雅普诺夫稳定性定...针对覆冰输电导线舞动问题,基于概率密度演化法,提出了一种覆冰输电导线起舞概率分析方法。首先,建立了基于临界风速的覆冰输电导线起舞功能函数,结合具有3个平动自由度与1个扭转自由度的三结点索单元的有限元模型与李雅普诺夫稳定性定理,求解了覆冰输电导线起舞临界风速;其次,基于概率密度演化法,发展了一种覆冰输电导线起舞概率评估框架,并进行覆冰输电导线起舞概率的计算与分析;最后,获得了某单跨覆冰导线算例的起舞概率并进行了参数分析。分析结果表明:本研究方法可准确计算该单跨输电导线的起舞概率,在计算效率上相比拉丁超立方抽样-蒙特卡洛模拟法(Latin hypercube sampling-Monte Carlo simulation,简称LHS-MCS)具有显著优势;档距、初始水平张力与初始风攻角对该单跨输电导线的起舞概率影响较大。展开更多
基金supports of the National Natural Science Foundation of China(Nos.12032008,12102080)the Fundamental Research Funds for the Central Universities,China(No.DUT23RC(3)038)are much appreciated。
文摘Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the randomness of structural parameters,working condition and vibration environment are considered for fatigue life predication and reliability assessment.First,the lowcycle fatigue problem is modelled as stochastic static system with random parameters,while the high-cycle fatigue problem is considered as stochastic dynamic system under random excitations.Then,to deal with the two failure modes,the novel Direct Probability Integral Method(DPIM)is proposed,which is efficient and accurate for solving stochastic static and dynamic systems.The probability density functions of accumulated damage and fatigue life of turbine blade for low-cycle and high-cycle fatigue problems are achieved,respectively.Furthermore,the time–frequency hybrid method is advanced to enhance the computational efficiency for governing equation of system.Finally,the results of typical examples demonstrate high accuracy and efficiency of the proposed method by comparison with Monte Carlo simulation and other methods.It is indicated that the DPIM is a unified method for predication of random fatigue life for low-cycle and highcycle fatigue problems.The rotational speed,density,fatigue strength coefficient,and fatigue plasticity index have a high sensitivity to fatigue reliability of engine turbine blade.
基金Project (BK20130174) supported by the Basic Research Project of Jiangsu Province (Natural Science Foundation) Project (1101109C) supported by Jiangsu Planned Projects for Postdoctoral Research Funds,China+1 种基金Project (201325) supported by the Key Laboratory of Geo-informatics of State Bureau of Surveying and Mapping,ChinaProject (SZBF2011-6-B35) supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining subsidence using D-InSAR technique and probability integral method. The details of the algorithm are as follows：the control points set, containing correct phase unwrapping points on the subsidence basin edge generated by D-InSAR and several observation points （near the maximum subsidence and inflection points）, was established at first; genetic algorithm （GA） was then used to optimize the parameters of probability integral method; at last, the surface subsidence was deduced according to the optimum parameters. The results of the experiment in Huaibei mining area, China, show that the presented method can generate the correct mining subsidence basin with a few surface observations, and the relative error of maximum subsidence point is about 8.3%, which is much better than that of conventional D-InSAR （relative error is 68.0%）.
基金provided by the National Natural Science Foundation of China(No.51404272)the Hunan Province Key Laboratory of Coal Resources Clean-Utilization and Mine Environment Protection(No.E21224)
文摘In order to obtain accurate probability integration method(PIM) parameters for surface movement of multi-panel mining, a genetic algorithm(GA) was used to optimize the parameters. As the measured surface movement is affected by more than one mining panel, traditional PIM parameter inversion model is difficult to ensure the reliability of the results due to the complexity of rock movement. With crossover,mutation and selection operators, GA can perform a global optimization search and has high computation efficiency. Compared with the pattern search algorithm, the fitness function can avoid falling into local minima traps. GA reduces the risk of local minima traps which improves the accuracy and reliability with the mutation mechanism. Application at Xuehu colliery shows that GA can be used to inverse the PIM parameters for multi-panel surface movement observation, and reliable results can be obtained. The research provides a new way for back-analysis of PIM parameters for mining subsidence under complex conditions.
基金Projects(51409167,51139001,51179066)supported by the National Natural Science Foundation of ChinaProjects(201401022,201501036)supported by the Ministry of Water Resources Public Welfare Industry Research Special Fund,ChinaProjects(GG201532,GG201546)supported by the Scientific and Technological Research for Water Conservancy,Henan Province,China
文摘The structural system failure probability(SFP) is a valuable tool for evaluating the global safety level of concrete gravity dams.Traditional methods for estimating the failure probabilities are based on defined mathematical descriptions,namely,limit state functions of failure modes.Several problems are to be solved in the use of traditional methods for gravity dams.One is how to define the limit state function really reflecting the mechanical mechanism of the failure mode;another is how to understand the relationship among failure modes and enable the probability of the whole structure to be determined.Performing SFP analysis for a gravity dam system is a challenging task.This work proposes a novel nonlinear finite-element-based SFP analysis method for gravity dams.Firstly,reasonable nonlinear constitutive modes for dam concrete,concrete/rock interface and rock foundation are respectively introduced according to corresponding mechanical mechanisms.Meanwhile the response surface(RS) method is used to model limit state functions of main failure modes through the Monte Carlo(MC) simulation results of the dam-interface-foundation interaction finite element(FE) analysis.Secondly,a numerical SFP method is studied to compute the probabilities of several failure modes efficiently by simple matrix integration operations.Then,the nonlinear FE-based SFP analysis methodology for gravity dams considering correlated failure modes with the additional sensitivity analysis is proposed.Finally,a comprehensive computational platform for interfacing the proposed method with the open source FE code Code Aster is developed via a freely available MATLAB software tool(FERUM).This methodology is demonstrated by a case study of an existing gravity dam analysis,in which the dominant failure modes are identified,and the corresponding performance functions are established.Then,the dam failure probability of the structural system is obtained by the proposed method considering the correlation relationship of main failure modes on the basis of the mechanical mechanism analysis with the MC-FE simulations.
基金Project(50378036) supported by the National Natural Science Foundation of ChinaProject(200503) supported by Foundation of Communications Department of Hunan Province, China
文摘Based on Bishop's model and by applying the first and second order mean deviations method, an approximative solution method for the first and second order partial derivatives of functional function was deduced according to numerical analysis theory. After complicated multi-independent variables implicit functional function was simplified to be a single independent variable implicit function and rule of calculating derivative for composite function was combined with principle of the mean deviations method, an approximative solution format of implicit functional function was established through Taylor expansion series and iterative solution approach of reliability degree index was given synchronously. An engineering example was analyzed by the method. The result shows its absolute error is only 0.78% as compared with accurate solution.
基金This research is supported by National Key Research and Development Project(Grant Number 2019YFD0901002)Also Natural Science Foundation of Liaoning Province(Grant Number 20170540105)Liaoning Province Education Foundation(Grant Number JL201913)are gratefully acknowledged.
文摘Systemreliability sensitivity analysis becomes difficult due to involving the issues of the correlation between failure modes whether using analytic method or numerical simulation methods.A fast conditional reduction method based on conditional probability theory is proposed to solve the sensitivity analysis based on the approximate analytic method.The relevant concepts are introduced to characterize the correlation between failure modes by the reliability index and correlation coefficient,and conditional normal fractile the for the multi-dimensional conditional failure analysis is proposed based on the two-dimensional normal distribution function.Thus the calculation of system failure probability can be represented as a summation of conditional probability terms,which is convenient to be computed by iterative solving sequentially.Further the system sensitivity solution is transformed into the derivation process of the failure probability correlation coefficient of each failure mode.Numerical examples results show that it is feasible to apply the idea of failure mode relevancy to failure probability sensitivity analysis,and it can avoid multi-dimension integral calculation and reduce complexity and difficulty.Compared with the product of conditional marginalmethod,a wider value range of correlation coefficient for reliability analysis is confirmed and an acceptable accuracy can be obtained with less computational cost.
文摘In this study,geochemical anomaly separation was carried out with methods based on the distribution model,which includes probability diagram(MPD),fractal(concentration-area technique),and U-statistic methods.The main objective is to evaluate the efficiency and accuracy of the methods in separation of anomalies on the shear zone gold mineralization.For this purpose,samples were taken from the secondary lithogeochemical environment(stream sediment samples)on the gold mineralization in Saqqez,NW of Iran.Interpretation of the histograms and diagrams showed that the MPD is capable of identifying two phases of mineralization.The fractal method could separate only one phase of change based on the fractal dimension with high concentration areas of the Au element.The spatial analysis showed two mixed subpopulations after U=0 and another subpopulation with very high U values.The MPD analysis followed spatial analysis,which shows the detail of the variations.Six mineralized zones detected from local geochemical exploration results were used for validating the methods mentioned above.The MPD method was able to identify the anomalous areas higher than 90%,whereas the two other methods identified 60%(maximum)of the anomalous areas.The raw data without any estimation for the concentration was used by the MPD method using aminimum of calculations to determine the threshold values.Therefore,the MPD method is more robust than the other methods.The spatial analysis identified the detail soft hegeological and mineralization events that were affected in the study area.MPD is recommended as the best,and the spatial U-analysis is the next reliable method to be used.The fractal method could show more detail of the events and variations in the area with asymmetrical grid net and a higher density of sampling or at the detailed exploration stage.
基金the National Natural Science Foundation of China(Grant No.11472137).
文摘This paper proposed an efficient research method for high-dimensional uncertainty quantification of projectile motion in the barrel of a truck-mounted howitzer.Firstly,the dynamic model of projectile motion is established considering the flexible deformation of the barrel and the interaction between the projectile and the barrel.Subsequently,the accuracy of the dynamic model is verified based on the external ballistic projectile attitude test platform.Furthermore,the probability density evolution method(PDEM)is developed to high-dimensional uncertainty quantification of projectile motion.The engineering example highlights the results of the proposed method are consistent with the results obtained by the Monte Carlo Simulation(MCS).Finally,the influence of parameter uncertainty on the projectile disturbance at muzzle under different working conditions is analyzed.The results show that the disturbance of the pitch angular,pitch angular velocity and pitch angular of velocity decreases with the increase of launching angle,and the random parameter ranges of both the projectile and coupling model have similar influence on the disturbance of projectile angular motion at muzzle.
文摘In order to study the law of mining subsidence and ground movement, to provide the basis of coal mining under building, railway and water, we used the probability integration method to make comprehensive evaluation of ground stability. Take Yingcheng Coal Mine of Jiutai as an example. Mining-induced movement and horizontal movement are analyzed on the basis of the measurement data. The resuhs of prediction can pro- vide reference and basis for prevention of coal mining subsidence and future restoration and treatment.
文摘This paper provides a calculating method which can be used in calculation of the kill probability attack area for every AAM. At first, attack area of AAM and kill probability of every characteristic point are obtained by combining trajectory calculation with kill probability calculation. Then, coordinates of a fire point relative to standard kill probability value in terms of standardization method are found. At last, equivalent kill probability curve equations are formulated by means of curve fitting method.
文摘In this paper, a new method for seismic hazard analysis, the probability-consistent method based on practical ground surface motion is proposed. Time histories on ground surface in the method correspond to earthquakes occurring at potential sources around sites. So of the envelope parameter, response spectrum, peak ground acceleration are of physical sense. Neglecting the response of site soil layers, the method is the same as routine probability-consistent method. The natural seismic acceleration time histories can be used for input wave directly. Generating ground motion is an approximation under lack of data of strong motion. Along with accumulating of the strong motion data around sites, we can describe the seismic environment more objectively.
基金This research is supported by the National Natural Science Foundation of China(Grant No.51578444)Key Science Research Program of Education Department of Shaanxi Province(Grant No.20JY032).
文摘A new analysis framework based on probability density evolution method(PDEM)and its Chebyshev collocation solution are introduced to predict the dynamic response and short-term extreme load of offshore wind turbine(OWT)towers subjected to random sea state.With regard to the stochastic responses,random function method is employed to generate samples of sea elevation,the probability density evolution equation(PDEE)is solved to calculate time-variant probability density functions of structural responses.For the probabilistic load estimation,a FAST model of NREL 5MW offshore turbine is established to obtain samples of bending moment at the tower base.The equivalent extreme event theory is used to construct a virtual stochastic process(VSP)to assess the short-term extreme load.The results indicate that the proposed approach can predict time-variant probability density functions of the structural responses,and shows good agreement with Monte Carlo simulations.Additionally,the predicted short-term extreme load can capture the fluctuation at the tail of the extreme value distribution,thus is more rational than results from the typical distribution models.Overall,the proposed method shows good adaptation,precision and efficiency for the dynamic response analysis and load estimation of OWT towers.
文摘In this paper, rock mass is regarded as anisotropic clastic units and the partial differential equation of subsidence has been testified. The solution about homogeneous anisotropy has been obtained. The existence of inflection point offset in subsidence formula has been proved. Lastly, the relevant influence factors about the offset of inflection point have been simply discussed.
文摘This study proposes a method for calculating the probability distribution of structural responses at different intensities using the endurance time(ET)method.The results can be used to calculate the fragility curve of structural collapse.The ET method involves dynamic analysis of a structure under an intensifying record over time.While conventional ET methods can determine the median of the structural response,they lack the ability to calculate its dispersion.To address this limitation,the present study utilizes ET analysis and single-degree-of-freedom(SDOF)systems to develop a method that considers the record-to-record variability for calculating the probability distribution of structural response.The accuracy of this method is evaluated by comparing it with the incremental dynamic analysis(IDA)method using special moment frames.The results demonstrate that the proposed method achieves a reasonably accurate estimation of dispersion while significantly reducing the computational burden(by approximately 95%)compared to the IDA method.
文摘To get the probability of long span bridges under the influence of external random factors, the Monte Carlo method using Latin hypercube sampling is applied. Combined with the condition assessment system on Runyang Suspension Bridge, which is the longest suspension bridge in China, the structural probabilities in normal and damaged situations are calculated with the external random factors considered including environmental temperature, wind load, load of vehicles, etc. The main assessment items contain the maximal vertical displacement of girder, the maximal stress of cables, the maximal horizontal displacement of towers etc. Finally, the probabilities and their cumulative distribution functions are provided. The analysis results can be plotted on line in a clear and vivid way, so the efficiency of assessment is increased and the decision-making of maintenance is more objective and accurate.
文摘针对覆冰输电导线舞动问题,基于概率密度演化法,提出了一种覆冰输电导线起舞概率分析方法。首先,建立了基于临界风速的覆冰输电导线起舞功能函数,结合具有3个平动自由度与1个扭转自由度的三结点索单元的有限元模型与李雅普诺夫稳定性定理,求解了覆冰输电导线起舞临界风速;其次,基于概率密度演化法,发展了一种覆冰输电导线起舞概率评估框架,并进行覆冰输电导线起舞概率的计算与分析;最后,获得了某单跨覆冰导线算例的起舞概率并进行了参数分析。分析结果表明:本研究方法可准确计算该单跨输电导线的起舞概率,在计算效率上相比拉丁超立方抽样-蒙特卡洛模拟法(Latin hypercube sampling-Monte Carlo simulation,简称LHS-MCS)具有显著优势;档距、初始水平张力与初始风攻角对该单跨输电导线的起舞概率影响较大。
