The technology of three dimensional(3D) printing,also known as additive manufacturing,is a cuttingedge type of fabrication method that utilizes a computer-aided design platform and employs layer-bylayer stacking to co...The technology of three dimensional(3D) printing,also known as additive manufacturing,is a cuttingedge type of fabrication method that utilizes a computer-aided design platform and employs layer-bylayer stacking to construct objects with exceptional flexibility.Due to its capacity to produce a substantial quantity of products within a short period of time,3D printing has emerged as one of the most significant manufacturing technology.Over the past two decades,remarkable advancements have been made in the application of 3D printing technology in the realm of bone tissue engineering.This review presents an innovative and systematic discussion on the potential application of 3D printing technology in bone tissue engineering,particularly in the treatment of infected bone defects.It comprehensively evaluates the materials utilized in 3D printing,highlights the interplay between cells and bone regeneration,and addresses and resolves challenges associated with current 3D printing technology.These challenges include material selection,fabrication of intricate 3D structures,integration of different cell types,streamlining design processes and material selection procedures,enhancing the clinical translational potential of 3D printing technology,and ultimately exploring future applications of four dimensional(4D) printing technology.The 3D printing technology has demonstrated significant potential in the synthesis of bone substitutes,offering consistent mechanical properties and ease of use.It has found extensive applications in personalized implant customization,prosthetic limb manufacturing,surgical tool production,tissue engineering,biological modeling,and cell diagnostics.Simultaneously,3D bioprinting provides an effective solution to address the issue of organ donor shortage.However,challenges still exist in material selection,management of structural complexity,integration of different cell types,and construction of functionally mature tissues.With advancements in multi-material printing techniques as well as bioprinting and 4D printing technologies emerging on the horizon;3D printing holds immense prospects for revolutionizing the means by which infectious bone defects are repaired.展开更多
This research investigates the behavior of sandwich glued laminated bamboo(Glubam)structures with a core formed by biodegradable plastic fibers,specifically polylactic acid(PLA),fabricated using 3D printing technology...This research investigates the behavior of sandwich glued laminated bamboo(Glubam)structures with a core formed by biodegradable plastic fibers,specifically polylactic acid(PLA),fabricated using 3D printing technology.The influence of various fiber printing orientations(0°and 45/135°)on tensile and compressive properties was investigated.The experimental results indicated that polylactic acid with calcium carbonate(PLA+)printed unidirectionally and aligned with the loading direction(0°)exhibits superior tensile and compressive strengths compared to specimens printed bidirectionally at 45/135°.Furthermore,the effect of additives on bioplastics of carbon fiber(PLA-CF)and glass fiber(PLA-GF)additives in PLA-based composites was evaluated in comparison with PLA+specimens.The finding indicated that PLA+has a higher strength-to-cost ratio compared to PLA-CF and PLA-GF.Therefore,unidirectionally printed PLA+was selected as the core material in two geometries:honeycomb and honeycomb lattice.These cores were sandwiched between Glubam panels on the top and bottom surfaces of the structures.Flexural performance was evaluated through four-point bending tests,which revealed that sandwich structures with a honeycomb core achieved a flexural strength-to-weight ratio 56.51%higher than those with a honeycomb lattice core.A parametric study using the finite element model was conducted to evaluate the effect of core scale,cross-sectional depth,Glubamthickness,core depth,and the number of honeycomb elements.The results showed that reducing the Glubam thickness while increasing the 3D-printed core depth significantly improved the flexural performance of honeycomb sandwich structures.Notably,reduced Glubam panel thickness coupled with increased core depth enhanced their flexural performance.展开更多
Objective:To analyze the impact of 3D printing technology application on bite force and masticatory efficiency in patients following oral implant dentistry treatment.Methods:A total of 84 patients with single-tooth de...Objective:To analyze the impact of 3D printing technology application on bite force and masticatory efficiency in patients following oral implant dentistry treatment.Methods:A total of 84 patients with single-tooth defects,selected from 100 patients who sought treatment from May 2023 to March 2025 and met the study criteria,were included in this study.The patients were divided into groups using a random number table method.The control group(42 cases)received conventional oral implant treatment,while the observation group(42 cases)underwent oral implant treatment guided by 3D printing technology.Both groups were followed up continuously for 6 months postoperatively.Masticatory efficiency,bite force,implantation accuracy indicators,and the incidence of treatment complications were compared between the two groups before treatment and 6 months after treatment.Results:There was no statistically significant difference in the incidence of complications following oral implantation between the two groups(p>0.05).Compared to the control group,the observation group showed increased masticatory efficiency and bite force after oral implant treatment,with statistically significant differences in the deviation values of the implant crown,apical part in the sagittal plane,axial angle,and neck(p<0.05).Conclusion:The application of 3D printing technology in oral implant treatment can effectively reduce implant placement deviations,enhance implantation accuracy,and effectively correct and maintain the oral occlusal force and masticatory function health of patients.展开更多
This paper systematically studies the current practical application status,existing problems and optimization suggestions of 3D printing technology in spacecraft manufacturing.Research shows that this technology has b...This paper systematically studies the current practical application status,existing problems and optimization suggestions of 3D printing technology in spacecraft manufacturing.Research shows that this technology has been successfully applied to the manufacturing of key components such as rocket engines and satellite structures,demonstrating advantages like lightweight and rapid prototyping.However,it still faces core challenges such as material performance,process stability,adaptability to space environments,and industrialization costs.In response to these issues,this paper proposes three optimization suggestions:enhancing manufacturing reliability by developing aerospace-specific materials,optimizing process parameters,and establishing a quality traceability system.Surface modification technology and topological optimization design are adopted to enhance the adaptability to the spatial environment,and a space-ground integrated verification method is constructed.Reduce industrialization costs through the localization of materials,modular production,and the construction of a standardized system.Research has confirmed that implementing these measures can reduce the performance dispersion of 3D-printed aerospace components by more than 50%,increase their in-orbit lifespan by three times,and lower production costs by 30-40%.The research results of this paper provide a systematic technical route and industrialization solution for the large-scale application of 3D printing technology in the aerospace field,which has significant reference value for promoting the innovation of aerospace manufacturing models.展开更多
In order to study the successive deposition and solidification processes of uniform alloy droplets during the drop-on-demand three dimensional（3D） printing method,based on the volume of fluid（VOF） method,a 3D nume...In order to study the successive deposition and solidification processes of uniform alloy droplets during the drop-on-demand three dimensional（3D） printing method,based on the volume of fluid（VOF） method,a 3D numerical model was employed.In this model,the 7075 alloy with larger temperature range for phase change was used.The simulation results show that the successive deposition and solidification processes of uniform 7075 alloy droplets can be well characterized by this model.Simulated droplets shapes agree well with SEM images under the same condition.The effects of deposition and solidification of droplets result in vertical and L-shaped ridges on the surface of droplets,and tips of dendrites appear near the overlap of droplets due to rapid solidification.展开更多
3D printing technology is a new type of precision forming technology and the core technology of the third industrial revolution.The powder-based 3D printing technology of titanium and its alloys have received great at...3D printing technology is a new type of precision forming technology and the core technology of the third industrial revolution.The powder-based 3D printing technology of titanium and its alloys have received great attention in biomedical applications since its advantages of custom manufacturing,costsaving,time-saving,and resource-saving potential.In particular,the personalized customization of 3D printing can meet specific needs and achieve precise control of micro-organization and structural design.The purpose of this review is to present the most advanced multi-material 3D printing methods for titanium-based biomaterials.We first reviewed the bone tissue engineering,the application of titanium alloy as bone substitutes and the development of manufacturing technology,which emphasized the advantages of 3D printing technology over traditional manufacturing methods.What is more,the optimization design of the hierarchical structure was analyzed to achieve the best mechanical properties,and the biocompatibility and osseointegration ability of the porous titanium alloy after implantation in living bodies was analyzed.Finally,we emphasized the development of digital tools such as artificial intelligence,which provides new ideas for the rational selection of processing parameters.The 3D printing titanium-based alloys will meet the huge market demand in the biomedical field,but there are still many challenges,such as the trade-off between high strength and low modulus,optimization of process parameters and structural design.We believe that the combination of mechanical models,machine learning,and metallurgical knowledge may shape the future of metal printing.展开更多
In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor...In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.展开更多
Three dimensional （3D） printing technology was utilized to fabricate a new type of drug implant with complicated architectures, employing levofloxacin （LVFX） and rifampicine （RFP） as model drugs. The prepared dr...Three dimensional （3D） printing technology was utilized to fabricate a new type of drug implant with complicated architectures, employing levofloxacin （LVFX） and rifampicine （RFP） as model drugs. The prepared drug implant prototype consists of a doublelayer structure, of which the upper region is a reservoir system containing RFP and the lower region is a matrix one containing LVFX. The release test in vivo revealed that LVFX was released in the early stage; no RFP was detected until 8th day; both of them continuously released more than 6 weeks. Therefore, 3D printing technology provides a precise and feasible method to fabricate a controlled-releasing drug implant with complicated architectures and this drug implant may present a new strategy for the prophylaxis and treatment of bone diseases such as combined bone infections and bone tuberculosis in the near future.展开更多
Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in...Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems.Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion.Additionally,these switches did not employ any structures in securing internal gas composition,resulting in inconsistent performance under harsh atmospheres.In this work,a novel planar triggered spark-gap switch(PTS)with a hermetically sealed cavity was batched-prepared with printed circuit board(PCB)technology,to achieve reusability with low cost.The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision.The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times.The calculated switch voltage and circuit current were consistent with those derived from real-world measurements.Finally,PCB PTS was used to introduce hexanitrostilbene(HNS)pellets in a pulse power system to verify its performance.展开更多
BACKGROUND Giant cell tumors(GCT)are most commonly seen in the distal femur.These tumors are uncommon in the small bones of the hand and feet,and a very few cases have been reported.A giant cell tumor of the talus is ...BACKGROUND Giant cell tumors(GCT)are most commonly seen in the distal femur.These tumors are uncommon in the small bones of the hand and feet,and a very few cases have been reported.A giant cell tumor of the talus is rarely seen clinically and could be a challenge to physicians.CASE SUMMARY We report a rare case of GCT of the talus in one patient who underwent a new reconstructive surgery technique using a three-dimensional(3D)printing talar prosthesis.The prosthesis shape was designed by tomographic image processing and segmentation using technology to match the intact side by mirror symmetry with 3D post-processing technologies.The patient recovered nearly full range of motion of the ankle after 6 mo.The visual analogue scale and American Orthopaedic Foot and Ankle Society scores were 1 and 89 points,respectively.CONCLUSION We demonstrated that 3D printing of a talar prosthesis is a beneficial option for GCT of the talus.展开更多
BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an ...BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.展开更多
As advanced functional materials,piezoelectric ceramics are widely used in various fields,including the medical,aviation,and military industries.With the advancement of science and technology,the piezoelectric ceramic...As advanced functional materials,piezoelectric ceramics are widely used in various fields,including the medical,aviation,and military industries.With the advancement of science and technology,the piezoelectric ceramics needed in special fields have become more intelligent,diverse and lightweight.The shapes and structures of piezoelectric ceramics are becoming more complex.Traditional piezoelectric ceramic preparation technology has been unable to meet the high-speed and complex production demands of various industries.Considering this situation,3D printing technology has attracted much attention in the field of piezoelectric ceramics.In this paper,the applications of several main 3D printing techniques in the field of piezoelectric ceramics are mainly introduced,and their development statuses,process characteristics and achievements are summarized.The advantages and disadvantages of each printing technique are summarized and compared.The challenges and possible future trends of 3D printing when manufacturing piezoelectric ceramics are summarized and proposed.展开更多
3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings an...3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings and urban spaces for people with disabilities through 3D priming technology is still not broadly explored. The present study is focused on filling this gap, with the realization of a tactile map of the MTE （Museum of Electrical Technology） of the University of Pavia （Italy） for blind and visually impaired people. The tactile map represents the building plan with all the information to guide the visit. The device is the result of a research process which is made by several steps and experimental tests, aimed at setting the best 3D priming profiles to meet all the requirements of the end-users. This paper describes methods and strategies applied to reach these goals： it underlines the social and technical approaches, the experimental phases and its possible future developments.展开更多
Objective:To explore the clinical method and effect of 3D printing in the treatment of cerebral aneurysms.Methods:The authors research work on the hospital,work time in February 2019-February 2020,this study selected ...Objective:To explore the clinical method and effect of 3D printing in the treatment of cerebral aneurysms.Methods:The authors research work on the hospital,work time in February 2019-February 2020,this study selected patients of cerebral aneurysms,this period are selected for treatment of 100 cases of patients,randomly divided into two groups,a group to give simple intervention,named as the control group,another group for the interventional therapy under the guidance of 3 D printing,named as experimental group,analyze the effect of two groups of patients with clinical intervention.Results:The length of hospital stay in the experimental group was shorter than that in the control group.Meanwhile,the incidence of complications and adverse reactions in the experimental group and the control group were 6.00%and 18.00%,the experimental group was better(P<0.05).Conclusion:3D printing technology can be applied in the treatment of patients with cerebral aneurysms to provide guidance for interventional surgical treatment.It has significant effect,can reduce the incidence complications in patients,has significant clinical effect,and can be popularized.展开更多
With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and fut...With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.展开更多
Breast cancer, the most prevalent malignant tumor among women, has shown a rising incidence rate in recent years. Personalized and precise comprehensive treatment is currently considered the optimal approach for breas...Breast cancer, the most prevalent malignant tumor among women, has shown a rising incidence rate in recent years. Personalized and precise comprehensive treatment is currently considered the optimal approach for breast cancer management. The application of 3D printing technology in the medical field has been expanding, covering areas such as medical devices, anatomical models, tissue engineering scaffolds, tumor models, and drug formulation, drawing significant attention in the field of oncology. This article explores the application value of 3D printing technology in breast cancer treatment, including preoperative planning, radiotherapy, postoperative rehabilitation and adjuvant therapy, and scientific research, aiming to provide new perspectives and methods for clinical breast cancer treatment.展开更多
With the changing times, 3D printing technology has been effectively popularized in peoples daily life, and gradually entered into education. 3D printing technology is mainly based on the printing of digital model fil...With the changing times, 3D printing technology has been effectively popularized in peoples daily life, and gradually entered into education. 3D printing technology is mainly based on the printing of digital model files, and it is effective to finalize the design by using powdered metal or adhesive materials such as materials, and to print the structure of objects through different layers of objects. With the "Notice on Promulgating the Professional Catalogue of National Technical Colleges (revised in 2018)" issued by the Ministry of Human Resources and Social Security in 2018, 3D printing technology is applied to professional teaching. And actively carry out effective research on the characteristic teaching resources contained in 3D printing technology. This paper mainly focuses on Korean translation teaching and effectively develops and studies the characteristic teaching resources of 3D printing technology application specialty in Korean translation teaching.展开更多
’97 Wuhan International Screen Special Printing Technology Exhibition was held from May 21—24, 1997 in Wuhan city,the capital of Hubei Province. 120 famous exhibitors from China, USA, Canada, Holland, Japan, Korea, ...’97 Wuhan International Screen Special Printing Technology Exhibition was held from May 21—24, 1997 in Wuhan city,the capital of Hubei Province. 120 famous exhibitors from China, USA, Canada, Holland, Japan, Korea, and Hong Kong, Taiwan districts attended the Exhibition. The booth area was more than 5000 m^2.展开更多
2006 is the commencing year of the Eleventh Five-Year Plan for National Economic and Social Development, and also the fifth anniversary of China joining the World Trade Organization. After the development of the trans...2006 is the commencing year of the Eleventh Five-Year Plan for National Economic and Social Development, and also the fifth anniversary of China joining the World Trade Organization. After the development of the transition period in these years, China’s national economy has successfully inte grated into the global system. National economy remains de- veloping at a high speed. The total amount of import and export reached more than 1.4 trillion USD,展开更多
Time: Sept.4-6, 2008Venue: Shenzhen Convention & Exhibition CenterSponsor: Printing and Printing Equipment Industries Association of China (PEIAC)Organizers: The Exhibition Department of
基金supported by the National Natural Science Fund of China(Nos.82202726,82370929)the National Clinical Research Center for Geriatrics,West China Hospital,Sichuan University(No.Z20192013)+5 种基金Key research and development project of Sichuan Science and Technology Department(No.2023YFG0219)"Zeroto One" Innovation Research Project of Sichuan University(No.2022SCUH0014)Frontiers Medical Center,Tianfu Jincheng Laboratory Foundation(No.TFJC2023010001)Sichuan Science and Technology Program(No.2022NSFSC0002)Sichuan Province Youth Science and Technology Innovation Team(No.2022JDTD0021)Research and Develop Program,West China Hospital of Stomatology Sichuan University(Nos.RD03202302,RCDWJS2024-1)。
文摘The technology of three dimensional(3D) printing,also known as additive manufacturing,is a cuttingedge type of fabrication method that utilizes a computer-aided design platform and employs layer-bylayer stacking to construct objects with exceptional flexibility.Due to its capacity to produce a substantial quantity of products within a short period of time,3D printing has emerged as one of the most significant manufacturing technology.Over the past two decades,remarkable advancements have been made in the application of 3D printing technology in the realm of bone tissue engineering.This review presents an innovative and systematic discussion on the potential application of 3D printing technology in bone tissue engineering,particularly in the treatment of infected bone defects.It comprehensively evaluates the materials utilized in 3D printing,highlights the interplay between cells and bone regeneration,and addresses and resolves challenges associated with current 3D printing technology.These challenges include material selection,fabrication of intricate 3D structures,integration of different cell types,streamlining design processes and material selection procedures,enhancing the clinical translational potential of 3D printing technology,and ultimately exploring future applications of four dimensional(4D) printing technology.The 3D printing technology has demonstrated significant potential in the synthesis of bone substitutes,offering consistent mechanical properties and ease of use.It has found extensive applications in personalized implant customization,prosthetic limb manufacturing,surgical tool production,tissue engineering,biological modeling,and cell diagnostics.Simultaneously,3D bioprinting provides an effective solution to address the issue of organ donor shortage.However,challenges still exist in material selection,management of structural complexity,integration of different cell types,and construction of functionally mature tissues.With advancements in multi-material printing techniques as well as bioprinting and 4D printing technologies emerging on the horizon;3D printing holds immense prospects for revolutionizing the means by which infectious bone defects are repaired.
基金provided by the Thailand Science Research and Innovation(TSRI)through the Basic Research Fund,Fiscal Year 2026,for the project“Numerical Modeling and Structural Analysis of Composite Sections Built-up from Local Timber inThailand”.
文摘This research investigates the behavior of sandwich glued laminated bamboo(Glubam)structures with a core formed by biodegradable plastic fibers,specifically polylactic acid(PLA),fabricated using 3D printing technology.The influence of various fiber printing orientations(0°and 45/135°)on tensile and compressive properties was investigated.The experimental results indicated that polylactic acid with calcium carbonate(PLA+)printed unidirectionally and aligned with the loading direction(0°)exhibits superior tensile and compressive strengths compared to specimens printed bidirectionally at 45/135°.Furthermore,the effect of additives on bioplastics of carbon fiber(PLA-CF)and glass fiber(PLA-GF)additives in PLA-based composites was evaluated in comparison with PLA+specimens.The finding indicated that PLA+has a higher strength-to-cost ratio compared to PLA-CF and PLA-GF.Therefore,unidirectionally printed PLA+was selected as the core material in two geometries:honeycomb and honeycomb lattice.These cores were sandwiched between Glubam panels on the top and bottom surfaces of the structures.Flexural performance was evaluated through four-point bending tests,which revealed that sandwich structures with a honeycomb core achieved a flexural strength-to-weight ratio 56.51%higher than those with a honeycomb lattice core.A parametric study using the finite element model was conducted to evaluate the effect of core scale,cross-sectional depth,Glubamthickness,core depth,and the number of honeycomb elements.The results showed that reducing the Glubam thickness while increasing the 3D-printed core depth significantly improved the flexural performance of honeycomb sandwich structures.Notably,reduced Glubam panel thickness coupled with increased core depth enhanced their flexural performance.
文摘Objective:To analyze the impact of 3D printing technology application on bite force and masticatory efficiency in patients following oral implant dentistry treatment.Methods:A total of 84 patients with single-tooth defects,selected from 100 patients who sought treatment from May 2023 to March 2025 and met the study criteria,were included in this study.The patients were divided into groups using a random number table method.The control group(42 cases)received conventional oral implant treatment,while the observation group(42 cases)underwent oral implant treatment guided by 3D printing technology.Both groups were followed up continuously for 6 months postoperatively.Masticatory efficiency,bite force,implantation accuracy indicators,and the incidence of treatment complications were compared between the two groups before treatment and 6 months after treatment.Results:There was no statistically significant difference in the incidence of complications following oral implantation between the two groups(p>0.05).Compared to the control group,the observation group showed increased masticatory efficiency and bite force after oral implant treatment,with statistically significant differences in the deviation values of the implant crown,apical part in the sagittal plane,axial angle,and neck(p<0.05).Conclusion:The application of 3D printing technology in oral implant treatment can effectively reduce implant placement deviations,enhance implantation accuracy,and effectively correct and maintain the oral occlusal force and masticatory function health of patients.
文摘This paper systematically studies the current practical application status,existing problems and optimization suggestions of 3D printing technology in spacecraft manufacturing.Research shows that this technology has been successfully applied to the manufacturing of key components such as rocket engines and satellite structures,demonstrating advantages like lightweight and rapid prototyping.However,it still faces core challenges such as material performance,process stability,adaptability to space environments,and industrialization costs.In response to these issues,this paper proposes three optimization suggestions:enhancing manufacturing reliability by developing aerospace-specific materials,optimizing process parameters,and establishing a quality traceability system.Surface modification technology and topological optimization design are adopted to enhance the adaptability to the spatial environment,and a space-ground integrated verification method is constructed.Reduce industrialization costs through the localization of materials,modular production,and the construction of a standardized system.Research has confirmed that implementing these measures can reduce the performance dispersion of 3D-printed aerospace components by more than 50%,increase their in-orbit lifespan by three times,and lower production costs by 30-40%.The research results of this paper provide a systematic technical route and industrialization solution for the large-scale application of 3D printing technology in the aerospace field,which has significant reference value for promoting the innovation of aerospace manufacturing models.
基金Projects (51005186,51221001) supported by the National Natural Science Foundation of ChinaProject (85-TZ-2013) supported by the Research Fund of the State Key Laboratory of Solidification Processing(NWPU),ChinaProject (20126102110022) supported by the Doctoral Fund of Ministry of Education of China
文摘In order to study the successive deposition and solidification processes of uniform alloy droplets during the drop-on-demand three dimensional（3D） printing method,based on the volume of fluid（VOF） method,a 3D numerical model was employed.In this model,the 7075 alloy with larger temperature range for phase change was used.The simulation results show that the successive deposition and solidification processes of uniform 7075 alloy droplets can be well characterized by this model.Simulated droplets shapes agree well with SEM images under the same condition.The effects of deposition and solidification of droplets result in vertical and L-shaped ridges on the surface of droplets,and tips of dendrites appear near the overlap of droplets due to rapid solidification.
基金financial support provided by the National Key Research and Development Program of China(Grant No.2017YFB0701600)Key Program of Science and Technology of Yunnan Province(Grant No.202002AB080001-2)。
文摘3D printing technology is a new type of precision forming technology and the core technology of the third industrial revolution.The powder-based 3D printing technology of titanium and its alloys have received great attention in biomedical applications since its advantages of custom manufacturing,costsaving,time-saving,and resource-saving potential.In particular,the personalized customization of 3D printing can meet specific needs and achieve precise control of micro-organization and structural design.The purpose of this review is to present the most advanced multi-material 3D printing methods for titanium-based biomaterials.We first reviewed the bone tissue engineering,the application of titanium alloy as bone substitutes and the development of manufacturing technology,which emphasized the advantages of 3D printing technology over traditional manufacturing methods.What is more,the optimization design of the hierarchical structure was analyzed to achieve the best mechanical properties,and the biocompatibility and osseointegration ability of the porous titanium alloy after implantation in living bodies was analyzed.Finally,we emphasized the development of digital tools such as artificial intelligence,which provides new ideas for the rational selection of processing parameters.The 3D printing titanium-based alloys will meet the huge market demand in the biomedical field,but there are still many challenges,such as the trade-off between high strength and low modulus,optimization of process parameters and structural design.We believe that the combination of mechanical models,machine learning,and metallurgical knowledge may shape the future of metal printing.
基金supported by the National Natural Science Foundation of China (Grant No. U1934211)the Open Foundation of National Engineering Research Center of High-speed Railway Construction Technology (Grant No. HSR202005)Scientific Research Project of Hunan Education Department (Grant No.20B596)。
文摘In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.
基金Funded by the Graduate Innovation Fund of the Huazhong University of Science and Technology, the "863" Key Project of the National High Technology Research and Development Program of China (No.2006AA02A124)the Program for New Century Excellent Talents in University from the Ministry of Education of China( NCET-05-0647)
文摘Three dimensional （3D） printing technology was utilized to fabricate a new type of drug implant with complicated architectures, employing levofloxacin （LVFX） and rifampicine （RFP） as model drugs. The prepared drug implant prototype consists of a doublelayer structure, of which the upper region is a reservoir system containing RFP and the lower region is a matrix one containing LVFX. The release test in vivo revealed that LVFX was released in the early stage; no RFP was detected until 8th day; both of them continuously released more than 6 weeks. Therefore, 3D printing technology provides a precise and feasible method to fabricate a controlled-releasing drug implant with complicated architectures and this drug implant may present a new strategy for the prophylaxis and treatment of bone diseases such as combined bone infections and bone tuberculosis in the near future.
基金We gratefully acknowledge support from the Natural Science Foundation of Jiangsu Province of China(Grant No.BK20151486).
文摘Triggered spark-gap switch is a popular discharge switch for pulse power systems.Previous studies have focused on planarizing this switch using thin film techniques in order to meet the requirements of compact size in the systems.Such switches are one-shot due to electrodes being too thin to sufficiently resist spark-erosion.Additionally,these switches did not employ any structures in securing internal gas composition,resulting in inconsistent performance under harsh atmospheres.In this work,a novel planar triggered spark-gap switch(PTS)with a hermetically sealed cavity was batched-prepared with printed circuit board(PCB)technology,to achieve reusability with low cost.The proposed PTS was inspected by micro-computed tomography to ensure PCB techniques meet the requirements of machining precision.The results from electrical experiments demonstrated that PCB PTS were consistent and reusable with lifespan over 20 times.The calculated switch voltage and circuit current were consistent with those derived from real-world measurements.Finally,PCB PTS was used to introduce hexanitrostilbene(HNS)pellets in a pulse power system to verify its performance.
文摘BACKGROUND Giant cell tumors(GCT)are most commonly seen in the distal femur.These tumors are uncommon in the small bones of the hand and feet,and a very few cases have been reported.A giant cell tumor of the talus is rarely seen clinically and could be a challenge to physicians.CASE SUMMARY We report a rare case of GCT of the talus in one patient who underwent a new reconstructive surgery technique using a three-dimensional(3D)printing talar prosthesis.The prosthesis shape was designed by tomographic image processing and segmentation using technology to match the intact side by mirror symmetry with 3D post-processing technologies.The patient recovered nearly full range of motion of the ankle after 6 mo.The visual analogue scale and American Orthopaedic Foot and Ankle Society scores were 1 and 89 points,respectively.CONCLUSION We demonstrated that 3D printing of a talar prosthesis is a beneficial option for GCT of the talus.
文摘BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.
基金This work was financially supported by the Scientific Research Fund-ing Project of the Educational Department of Liaoning Province in 2020,grant number LQ2020008.
文摘As advanced functional materials,piezoelectric ceramics are widely used in various fields,including the medical,aviation,and military industries.With the advancement of science and technology,the piezoelectric ceramics needed in special fields have become more intelligent,diverse and lightweight.The shapes and structures of piezoelectric ceramics are becoming more complex.Traditional piezoelectric ceramic preparation technology has been unable to meet the high-speed and complex production demands of various industries.Considering this situation,3D printing technology has attracted much attention in the field of piezoelectric ceramics.In this paper,the applications of several main 3D printing techniques in the field of piezoelectric ceramics are mainly introduced,and their development statuses,process characteristics and achievements are summarized.The advantages and disadvantages of each printing technique are summarized and compared.The challenges and possible future trends of 3D printing when manufacturing piezoelectric ceramics are summarized and proposed.
文摘3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings and urban spaces for people with disabilities through 3D priming technology is still not broadly explored. The present study is focused on filling this gap, with the realization of a tactile map of the MTE （Museum of Electrical Technology） of the University of Pavia （Italy） for blind and visually impaired people. The tactile map represents the building plan with all the information to guide the visit. The device is the result of a research process which is made by several steps and experimental tests, aimed at setting the best 3D priming profiles to meet all the requirements of the end-users. This paper describes methods and strategies applied to reach these goals： it underlines the social and technical approaches, the experimental phases and its possible future developments.
文摘Objective:To explore the clinical method and effect of 3D printing in the treatment of cerebral aneurysms.Methods:The authors research work on the hospital,work time in February 2019-February 2020,this study selected patients of cerebral aneurysms,this period are selected for treatment of 100 cases of patients,randomly divided into two groups,a group to give simple intervention,named as the control group,another group for the interventional therapy under the guidance of 3 D printing,named as experimental group,analyze the effect of two groups of patients with clinical intervention.Results:The length of hospital stay in the experimental group was shorter than that in the control group.Meanwhile,the incidence of complications and adverse reactions in the experimental group and the control group were 6.00%and 18.00%,the experimental group was better(P<0.05).Conclusion:3D printing technology can be applied in the treatment of patients with cerebral aneurysms to provide guidance for interventional surgical treatment.It has significant effect,can reduce the incidence complications in patients,has significant clinical effect,and can be popularized.
文摘With the continuous advancement of technology,the application of 3D printing technology in the field of dental medicine is becoming increasingly widespread.This article aims to explore the current applications and future potential of 3D printing technology in dental medicine and to analyze its benefits and challenges.It first introduces the current state of 3D printing technology in dental implants,crowns,bridges,orthodontics,and maxillofacial surgery.It then discusses the potential applications of 3D printing technology in oral tissue engineering,drug delivery systems,personalized dental prosthetics,and surgical planning.Finally,it analyzes the benefits of 3D printing technology in dental medicine,such as improving treatment accuracy and patient comfort,and shortening treatment times,while also highlighting the challenges faced,such as costs,material choices,and technical limitations.This article aims to provide a reference for professionals in the field of dental medicine and to promote the further application and development of 3D printing technology in this area.
文摘Breast cancer, the most prevalent malignant tumor among women, has shown a rising incidence rate in recent years. Personalized and precise comprehensive treatment is currently considered the optimal approach for breast cancer management. The application of 3D printing technology in the medical field has been expanding, covering areas such as medical devices, anatomical models, tissue engineering scaffolds, tumor models, and drug formulation, drawing significant attention in the field of oncology. This article explores the application value of 3D printing technology in breast cancer treatment, including preoperative planning, radiotherapy, postoperative rehabilitation and adjuvant therapy, and scientific research, aiming to provide new perspectives and methods for clinical breast cancer treatment.
文摘With the changing times, 3D printing technology has been effectively popularized in peoples daily life, and gradually entered into education. 3D printing technology is mainly based on the printing of digital model files, and it is effective to finalize the design by using powdered metal or adhesive materials such as materials, and to print the structure of objects through different layers of objects. With the "Notice on Promulgating the Professional Catalogue of National Technical Colleges (revised in 2018)" issued by the Ministry of Human Resources and Social Security in 2018, 3D printing technology is applied to professional teaching. And actively carry out effective research on the characteristic teaching resources contained in 3D printing technology. This paper mainly focuses on Korean translation teaching and effectively develops and studies the characteristic teaching resources of 3D printing technology application specialty in Korean translation teaching.
文摘’97 Wuhan International Screen Special Printing Technology Exhibition was held from May 21—24, 1997 in Wuhan city,the capital of Hubei Province. 120 famous exhibitors from China, USA, Canada, Holland, Japan, Korea, and Hong Kong, Taiwan districts attended the Exhibition. The booth area was more than 5000 m^2.
文摘2006 is the commencing year of the Eleventh Five-Year Plan for National Economic and Social Development, and also the fifth anniversary of China joining the World Trade Organization. After the development of the transition period in these years, China’s national economy has successfully inte grated into the global system. National economy remains de- veloping at a high speed. The total amount of import and export reached more than 1.4 trillion USD,
文摘Time: Sept.4-6, 2008Venue: Shenzhen Convention & Exhibition CenterSponsor: Printing and Printing Equipment Industries Association of China (PEIAC)Organizers: The Exhibition Department of
