<110> oriented Tb0.27Dy0.73Fe1.95 alloys were studied under different applied compressive prestresses.Larger saturation magnetostriction by 500×10-6 is obtained for the sample under 5 MPa than that under no...<110> oriented Tb0.27Dy0.73Fe1.95 alloys were studied under different applied compressive prestresses.Larger saturation magnetostriction by 500×10-6 is obtained for the sample under 5 MPa than that under no applied stress.To understand the effect of prestress on the magnetostrictive coefficient,differential magnetostrictive coefficient,relative permeability and coercive force were studied in detail.The results show that the maximum differential magnetostrictive coefficient is about 37 x 10-9 m·A-1,about two times that without stress.In addition,the saturation magnetostriction coefficient increases gradually with the stress increasing,while the maximum differential magnetostrictive coefficient decreases.The saturation inductions under different stresses are similar to a value of about 1.1 T.The relative permeability decreases with stress increasing.展开更多
Process-induced deformation is an important limiting factor to the application of high performance composite structures.An alternative method to reduce process-induced deformation is proposed by introducing prestress ...Process-induced deformation is an important limiting factor to the application of high performance composite structures.An alternative method to reduce process-induced deformation is proposed by introducing prestress to a single layer or part of the layers instead of all the applicable layers.In this method,the necessary prestress level that applied to the single layer was in the reasonable range.Two kinds of unsymmetric laminates are manufactured at varying prestress levels.The experimental results described that the curing deformation is changed rapidly with the growing prestress level and flipped after a certain prestress level.Moreover,there is a good linear relationship between prestress level and final curing deformation,which gives a convenient way to calculate the prestress level that can fully counteract the curing deformation.The numerical model to predict the curing deformation was built.A good agreement between the numerical and the experimental results shows the effectiveness of the numerical model.To predict the prestress level that can fully counteract the curing deformation,an analytical model is also proposed.Theoretically,the prestress method can fully counteract the curing deformation of the specimens,while the experimental results show that the prestressing layer reduces more than 80%of the curing deformation.展开更多
Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crac...Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.展开更多
Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring...Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.展开更多
As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective ...As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.展开更多
China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its constructio...China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its construction quality is easily affected by traditional manual operation technology,resulting in low construction efficiency and control accuracy,easy to form a hidden danger of quality and safety,it is difficult to meet the needs of less humanized,standardized intelligent construction trend.Based on the research on the intelligent prestressed construction control and testing technology and equipment for railway bridges,this paper proposes the integration of intelligent prestressed tension control and tunnel friction test of railway bridges,intelligent grouting control of tunnel and intelligent testing of beam construction quality,and sets up a complete technical system and integrated equipment for intelligent prestressed construction of bridges based on the industrial Internet of Things(IoT).Overall,improve the quality and efficiency of bridge production,construction,and management.展开更多
Understanding the mechanical properties of coal-rock-bolt(CRB)combinations at high strain rates and the anchoring mechanism of bolts is crucial for ensuring the safety of coal mining operations.However,the dynamic beh...Understanding the mechanical properties of coal-rock-bolt(CRB)combinations at high strain rates and the anchoring mechanism of bolts is crucial for ensuring the safety of coal mining operations.However,the dynamic behaviors of these combinations,especially the mechanism of action of prestressed bolts,still need to be further investigated.This study carried out split Hopkinson pressure bar(SHPB)tests on three sets of coal-rock(CR),CRB,and coal-rock-prestressed bolt(CRPB)combinations with different interface angles(β=15°,30°,45°,and 60°).The dynamic properties of the combinations were analyzed based on the stress-strain curve,energy dissipation,dynamic strength,fractal dimension of cracks,and failure mode of bolts.The test results show that a larger β will affect the stress transfer and anti-sliding ability of CR,resulting in a decrease in CR strength.The anchoring force of the bolt effectively suppresses the slip feature of CRB at the yield stage.As the strain rate increases,CRB shows a more pronounced'sudden increase'in strength,and the bolt significantly enhances its dynamic strength.The prestressed bolts enhance the dynamic strength of CRPB while weaken the effect of β.The fractal dimension of the macrocracks increases with strain rate,with smaller variations in CRB and CRPB,indicating that the bolt reduces the complexity degree of CRB and CRPB.The anchoring force of CRB depends on bolt strength,which reduces the slip along the interface.The anchoring force of CRPB balances the coal-rock slip and suppresses crack formation,resulting in a more cohesive response under dynamic load.展开更多
The stress gradient of surrounding rock and reasonable prestress of support are the keys to ensuring the stability of roadways.The elastic-plastic analytical solution for surrounding rock was derived based on unified ...The stress gradient of surrounding rock and reasonable prestress of support are the keys to ensuring the stability of roadways.The elastic-plastic analytical solution for surrounding rock was derived based on unified strength theory.A model for solving the stress gradient of the surrounding rock with the intermediate principal stress parameter b was established.The correctness and applicability of the solution for the stress gradient in the roadway surrounding rock was verified via multiple methods.Furthermore,the laws of stress,displacement,and the plastic zone of the surrounding rock with different b values and prestresses were revealed.As b increases,the stress gradient in the plastic zone increases,and the displacement and plastic zone radius decrease.As the prestress increases,the peak stress shifts toward the sidewalls,and the stress and stress gradient increments decrease.In addition,the displacement increment and plastic zone increment were proposed to characterize the support effect.The balance point of the plastic zone area appears before that of the displacement zone.The relationship between the stress gradient compensation coefficient and the prestress is obtained.This study provides a research method and idea for determining the reasonable prestress of support in roadways.展开更多
This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces adva...This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces advanced technologies such as intelligent prestressed tensioning,highlights key aspects like high-performance concrete mix design,and discusses various monitoring and control methods.It also covers their practical applications and achievements in real-world projects,and looks ahead to future development directions.展开更多
The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses chal...The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses challenges,and one of these issues involves the potential occurrence of longitudinal cracks in reinforcing bars,which can be caused by various constructional,functional,and environmental factors.Longitudinal cracks in PCS compromise the structural performance,resulting in a reduced capacity to withstand the loads exerted by moving vehicles.The current evaluations not only fail to yield a precise parameter for estimating the behavior and response of the PCS,but they also overlook the specific conditions of the PCS,such as prestressing,and only provide limited information regarding existing damage.Balancing the need for accurate evaluation with consideration of costs and resources,and making informed decisions about maintenance and track performance enhancement,has become a multifaceted challenge in ensuring a robust PCS assessment.This research introduces a novel methodology to improve the evaluation of mechanical and geometrical parameters of PCS over their operational lifespan.The objective is to enhance the accuracy of PCS performance estimation by concentrating on detecting longitudinal cracks.The suggested approach seamlessly integrates model updating methods and the finite element(FE)approach to achieve an accurate and timely assessment of PCS conditions.This comprehensive examination scrutinizes the methodology by applying artificial cracks to the PCS.In addition to introducing this assessment approach,a detailed examination is conducted on a laboratory-simulated PCS featuring various combinations of longitudinal cracks measuring 40,80,and 120 cm in length.This systematic and rigorous approach ensures the reliability and robustness of the methodology.Ultimately,the parameters of cross-sectional area,moment of inertia,and modulus of elasticity,which significantly impact the performance of this sleeper,are explored and demonstrated through functional methodologies.The findings suggest that assessing and addressing damage should be conducted through a comprehensive and integrated procedure,taking into account the actual conditions of the PCS.Longitudinal cracks lead to a substantial decrease in the performance of these components in railway tracks.By applying the proposed methods,it is anticipated that the evaluation error for these components will be reduced by approximately 30%compared to visual inspections,particularly in predicting the extent of damage for cracks measuring up to 120 cm.This research has the potential to significantly enhance the evaluation of PCS performance and mitigate the impact of longitudinal cracks on the safety and longevity of ballasted railway tracks in desert areas.展开更多
The Haidong Water Conveyance Tunnel(HWCT),a notable engineering feat located within Dali City,Yunnan Province,China,represents an ultra-long water conveyance tunnel situated in a region characterized by medium in-situ...The Haidong Water Conveyance Tunnel(HWCT),a notable engineering feat located within Dali City,Yunnan Province,China,represents an ultra-long water conveyance tunnel situated in a region characterized by medium in-situ stress conditions.As part of the Central Yunnan Water Diversion Project,this tunnel was specifically engineered for soft-rock environments.The excavation of such tunnels presents significant challenges due to rock mass deformation,commonly referred to as squeezing ground behavior.These challenges are exacerbated when navigating through diverse geological and geomorphological units,particularly in areas with complex geological conditions.To address these issues,an innovative active support system utilizing prestressed anchor cables was developed for the HWCT.This study provides a comprehensive analysis and comparison of rock mass behavior between two support systems:a conventional passive system employing steel arches and the proposed active system using prestressed anchor cables.The numerical modeling was performed using FLAC3D software to simulate various scenarios,while an extensive monitoring program was implemented in several representative tunnel sections to measure key parameters including rock mass stresses,displacements,internal forces in steel arches,and axial forces in anchor cables.The results from both the numerical simulations and field observations were systematically compared.The analyses demonstrated the superior performance of the active support system using prestressed anchor cables in the HWCT,significantly enhancing overall rock mass stability and effectively mitigating large deformation issues throughout the tunnel.展开更多
The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt suppo...The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt support is very important to the safety control of surrounding rock as a common support means.The control mechanism and design method of bolt support for shallow-buried large-span caverns is carried out.The calculation method of bolt prestress and length based on arched failure and collapsed failure mode is established.The influence mechanism of different influencing factors on the bolt prestress and length is clarified.At the same time,the constant resistance energy-absorbing bolt with high strength and high toughness is developed,and the comparative test of mechanical properties is carried out.On this basis,the design method of high prestressed bolt support for shallow-buried large-span caverns is put forward,and the field test is carried out in Qingdao metro station in China.The monitoring results show that the maximum roof settlement is 6.8 mm after the new design method is adopted,and the effective control of the shallow-buried large-span caverns is realized.The research results can provide theoretical and technical support for the safety control of shallow-buried large-span caverns.展开更多
In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a...In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.展开更多
To meet the demands for large space and flexible compartmentation ofbuildings, laminated vierendeel trasses are adopted in high-position transfer story structures.First the bearing characteristics are analyzed, in whi...To meet the demands for large space and flexible compartmentation ofbuildings, laminated vierendeel trasses are adopted in high-position transfer story structures.First the bearing characteristics are analyzed, in which reasonable stiffness ratio of the upperchord, middle chord, and lower chord is derived. Then combined with an actual engineering model (1:8similar ratio), the static loading and pseudo-dynamic tests of two models for laminated vierendeeltrass used in transfer story structures are conducted, in which one model adopts reinforcedconcrete, and the other adopts prestressed concrete and shape steel concrete. Seismic behaviors areanalyzed, including inter-story displacement, base shear-displacement skeleton curves, andequivalent viscosity-damping curves. A program is programmed to carry out the elasto-plastic dynamicanalysis, and displacement time-history curves of the two models are derived. The test and analysisresults show that the laminated vierendeel trass with prestressed concrete and shape steel concretehas excellent seismic behaviors. It can solve the disadvantages of laminated vierendeel trussesused in transfer story structures. Finally, some design suggestions are put forward, which can bereferenced by similar engineering.展开更多
Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reli...Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.展开更多
New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grou...New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.展开更多
With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement ...With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement slab and there is a greater resistance to impact, vibration and overloading. This paper discusses the major design considerations necessary in the successful construction of prestressed concrete pavements and presents a design procedure developed to predict the compressive stress due to prestressing in the pavements at early stage, during service and after cracking. Variation in the approach for repetitive and nonrepetitive loads is clearly distinguished. Check on the recovery after cracking for overloading in prestressed pavements is also needed. Finally, a design example is illustrated the application of the approach developed.展开更多
基金financially supported by the National High Technology Research and Development Program of China(No.2011AA03A404).
文摘<110> oriented Tb0.27Dy0.73Fe1.95 alloys were studied under different applied compressive prestresses.Larger saturation magnetostriction by 500×10-6 is obtained for the sample under 5 MPa than that under no applied stress.To understand the effect of prestress on the magnetostrictive coefficient,differential magnetostrictive coefficient,relative permeability and coercive force were studied in detail.The results show that the maximum differential magnetostrictive coefficient is about 37 x 10-9 m·A-1,about two times that without stress.In addition,the saturation magnetostriction coefficient increases gradually with the stress increasing,while the maximum differential magnetostrictive coefficient decreases.The saturation inductions under different stresses are similar to a value of about 1.1 T.The relative permeability decreases with stress increasing.
基金supported by the National Basic Research Program of China(No.2019283-006)Natural Science Basic Research Program of Shaanxi,China(No.2020JQ-113)Fundamental Research Funds for the Central Universities,China(No.G2019KY05106)。
文摘Process-induced deformation is an important limiting factor to the application of high performance composite structures.An alternative method to reduce process-induced deformation is proposed by introducing prestress to a single layer or part of the layers instead of all the applicable layers.In this method,the necessary prestress level that applied to the single layer was in the reasonable range.Two kinds of unsymmetric laminates are manufactured at varying prestress levels.The experimental results described that the curing deformation is changed rapidly with the growing prestress level and flipped after a certain prestress level.Moreover,there is a good linear relationship between prestress level and final curing deformation,which gives a convenient way to calculate the prestress level that can fully counteract the curing deformation.The numerical model to predict the curing deformation was built.A good agreement between the numerical and the experimental results shows the effectiveness of the numerical model.To predict the prestress level that can fully counteract the curing deformation,an analytical model is also proposed.Theoretically,the prestress method can fully counteract the curing deformation of the specimens,while the experimental results show that the prestressing layer reduces more than 80%of the curing deformation.
基金funded by the Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan(Grant No.AP19680589).
文摘Using the software ANSYS-19.2/Explicit Dynamics,this study performedfinite-element modeling of the large-diameter steel pipeline cross-section for the Beineu-Bozoy-Shymkent gas pipeline with a non-through straight crack,strengthened by steel wire wrapping.The effects of the thread tensile force of the steel winding in the form of single rings at the crack edges and the wires with different winding diameters and pitches were also studied.The results showed that the strengthening was preferably executed at a minimum value of the thread tensile force,which was 6.4%more effective than that at its maximum value.The analysis of the influence of the winding dia-meters showed that the equivalent stresses increased by 32%from the beginning of the crack growth until the wire broke.The increment in winding diameter decelerated the disclosure of the edge crack and reduced its length by 8.2%.The analysis of the influence of the winding pitch showed that decreasing the distance between the winding turns also led to a 33.6%reduction in the length of the straight crack and a 7.9%reduction in the maximum stres-ses on the strengthened pipeline cross-section.The analysis of the temperature effect on the pipeline material,within a range from-40℃to+50℃,resulted in a crack length change of up to 5.8%.As the temperature dropped,the crack length decreased.Within such a temperature range,the maximum stresses were observed along the cen-tral area of the crack,which were equal to 413 MPa at+50℃and 440 MPa at-40℃.The results also showed that the presence of the steel winding in the pipeline significantly reduced the length of crack propagation up to 8.4 times,depending on the temperature effect and design parameters of prestressing.This work integrated the existing methods for crack localization along steel gas pipelines.
基金supported by the National Natural Science Foundation of China(Grant Nos.51978672 and 52308335)the Natural Science Funding of Hunan Province(Grant No.2023JJ41054)the Natural Science Research Project of Anhui Educational Committee(Grant No.2023AH051170)。
文摘Understanding the reinforcement effect of the newly developed prestressed reinforcement components(PRCs)(a system composed of prestressed steel bars(PSBs),protective sleeves,lateral pressure plates(LPPs),and anchoring elements)is technically significant for the rational design of prestressed subgrade.A three-dimensional finite element model was established and verified based on a novel static model test and utilized to systematically analyze the influence of prestress levels and reinforcement modes on the reinforcement effect of the subgrade.The results show that the PRCs provide additional confining pressure to the subgrade through the diffusion effect of the prestress,which can therefore effectively improve the service performance of the subgrade.Compared to the unreinforced conventional subgrades,the settlements of prestressreinforced subgrades are reduced.The settlement attenuation rate(Rs)near the LPPs is larger than that at the subgrade center,and increasing the prestress positively contributes to the stability of the subgrade structure.In the multi-row reinforcement mode,the reinforcement effect of PRCs can extend from the reinforced area to the unreinforced area.In addition,as the horizontal distance from the LPPs increases,the additional confining pressure converted by the PSBs and LPPs gradually diminishes when spreading to the core load bearing area of the subgrade,resulting in a decrease in the Rs.Under the singlerow reinforcement mode,PRCs can be strategically arranged according to the local areas where subgrade defects readily occurred or observed,to obtain the desired reinforcement effect.Moreover,excessive prestress should not be applied near the subgrade shoulder line to avoid the shear failure of the subgrade shoulder.PRCs can be flexibly used for preventing and treating various subgrade defects of newly constructed or existing railway lines,achieving targeted and classified prevention,and effectively improving the bearing performance and deformation resistance of the subgrade.The research results are instructive for further elucidating the prestress reinforcement effect of PRCs on railway subgrades.
基金support by the Ministry of Education and Training of Vietnam for this research,under grant no.B2023-MBS-02.
文摘As prestressed concrete(PC)structures age,long-termeffects,e.g.,creep,shrinkage,and prestress losses,compromise their structural performance.Strengthening these aged PC beams has become a crucial matter.One effective solution is to use externally bonded fiber-reinforced polymer(FRP)sheets;however,limited research has been done on aged PC beams using the FRP,especially for beams with unbonded prestressing strands(UPC beams).Therefore,this research investigates the flexural strengthening efficacy of external FRP sheets on aged UPC beams with unbonded tendons.Aging minimally affected the failure modes of UPC beams,with nonstrengthened beams showing flexural failure via rebar yielding and concrete crushing,and FRP-strengthened beams failing due to FRP debonding and tensile reinforcement yielding,though tendons in the aged beams did not yield due to prestress losses,unlike the new beams.The U-wrap anchor curbed widespread debonding,leading to tensile reinforcement yielding and FRP rupture.Aging hastened crack growth and stiffness loss,increasing deflections and reducing load resistance,but FRP reinforcement mitigated these effects,enhancing cracking resistance by 14%over the unstrengthened aged beams and 7%over the new beams while boosting ultimate resistance by 9%above the non-strengthened new beams.Compared to the new FRP-strengthened beams,the aged counterparts had lower cracking resistance,stiffness and capacity—showing 20%higher deflections,7–9%lower serviceability loads,7%–17%reduced ultimate strength and 17%less deformability—due to prestress losses and premature FRP debonding.
基金Scientific and Technological Development Project of China Railway Design Group Co.,Ltd.(No.2022A02480005)Technology Development Project of China Railway Design Group Co.,Ltd.(No.2023A0248001).
文摘China's railway prestressed concrete bridge has more than 600000 holes,prestressed engineering is a key force system affecting the safety and durability of the prestressed concrete bridge structure,its construction quality is easily affected by traditional manual operation technology,resulting in low construction efficiency and control accuracy,easy to form a hidden danger of quality and safety,it is difficult to meet the needs of less humanized,standardized intelligent construction trend.Based on the research on the intelligent prestressed construction control and testing technology and equipment for railway bridges,this paper proposes the integration of intelligent prestressed tension control and tunnel friction test of railway bridges,intelligent grouting control of tunnel and intelligent testing of beam construction quality,and sets up a complete technical system and integrated equipment for intelligent prestressed construction of bridges based on the industrial Internet of Things(IoT).Overall,improve the quality and efficiency of bridge production,construction,and management.
基金Financial support from the National Natural Science Foundation of China(Grant No.52374119)the Province Education Department of Liaoning(Grant No.LJ212410146068)the opening fund of State Key Laboratory of Performance Monitoring and Protecting of Rail Transit Infrastructure,East China Jiaotong University(Grant No.HJGZ2023103).
文摘Understanding the mechanical properties of coal-rock-bolt(CRB)combinations at high strain rates and the anchoring mechanism of bolts is crucial for ensuring the safety of coal mining operations.However,the dynamic behaviors of these combinations,especially the mechanism of action of prestressed bolts,still need to be further investigated.This study carried out split Hopkinson pressure bar(SHPB)tests on three sets of coal-rock(CR),CRB,and coal-rock-prestressed bolt(CRPB)combinations with different interface angles(β=15°,30°,45°,and 60°).The dynamic properties of the combinations were analyzed based on the stress-strain curve,energy dissipation,dynamic strength,fractal dimension of cracks,and failure mode of bolts.The test results show that a larger β will affect the stress transfer and anti-sliding ability of CR,resulting in a decrease in CR strength.The anchoring force of the bolt effectively suppresses the slip feature of CRB at the yield stage.As the strain rate increases,CRB shows a more pronounced'sudden increase'in strength,and the bolt significantly enhances its dynamic strength.The prestressed bolts enhance the dynamic strength of CRPB while weaken the effect of β.The fractal dimension of the macrocracks increases with strain rate,with smaller variations in CRB and CRPB,indicating that the bolt reduces the complexity degree of CRB and CRPB.The anchoring force of CRB depends on bolt strength,which reduces the slip along the interface.The anchoring force of CRPB balances the coal-rock slip and suppresses crack formation,resulting in a more cohesive response under dynamic load.
基金Project(52274130)supported by the National Natural Science Foundation of ChinaProject(ZR2024ZD22)supported by the Major Basic Research Project of the Shandong Provincial Natural Science Foundation,China+2 种基金Project(2023375)supported by the Guizhou University Research and Innovation Team,ChinaProject(Leading Fund(2023)09)supported by the Natural Science Research Fund of Guizhou University,ChinaProject(JYBSYS2021101)supported by the Open Fund of Key Laboratory of Safe and Effective Coal Mining,Ministry of Education,China。
文摘The stress gradient of surrounding rock and reasonable prestress of support are the keys to ensuring the stability of roadways.The elastic-plastic analytical solution for surrounding rock was derived based on unified strength theory.A model for solving the stress gradient of the surrounding rock with the intermediate principal stress parameter b was established.The correctness and applicability of the solution for the stress gradient in the roadway surrounding rock was verified via multiple methods.Furthermore,the laws of stress,displacement,and the plastic zone of the surrounding rock with different b values and prestresses were revealed.As b increases,the stress gradient in the plastic zone increases,and the displacement and plastic zone radius decrease.As the prestress increases,the peak stress shifts toward the sidewalls,and the stress and stress gradient increments decrease.In addition,the displacement increment and plastic zone increment were proposed to characterize the support effect.The balance point of the plastic zone area appears before that of the displacement zone.The relationship between the stress gradient compensation coefficient and the prestress is obtained.This study provides a research method and idea for determining the reasonable prestress of support in roadways.
文摘This article focuses on the control of cracks in prestressed concrete structures.It explains the stress characteristics,influencing factors,and causes of crack formation during construction.The article introduces advanced technologies such as intelligent prestressed tensioning,highlights key aspects like high-performance concrete mix design,and discusses various monitoring and control methods.It also covers their practical applications and achievements in real-world projects,and looks ahead to future development directions.
文摘The operational and regional conditions to which the prestressed concrete sleeper(PCS)is subjected in a railway track significantly contribute to its performance and durability.Maintaining the health of PCS poses challenges,and one of these issues involves the potential occurrence of longitudinal cracks in reinforcing bars,which can be caused by various constructional,functional,and environmental factors.Longitudinal cracks in PCS compromise the structural performance,resulting in a reduced capacity to withstand the loads exerted by moving vehicles.The current evaluations not only fail to yield a precise parameter for estimating the behavior and response of the PCS,but they also overlook the specific conditions of the PCS,such as prestressing,and only provide limited information regarding existing damage.Balancing the need for accurate evaluation with consideration of costs and resources,and making informed decisions about maintenance and track performance enhancement,has become a multifaceted challenge in ensuring a robust PCS assessment.This research introduces a novel methodology to improve the evaluation of mechanical and geometrical parameters of PCS over their operational lifespan.The objective is to enhance the accuracy of PCS performance estimation by concentrating on detecting longitudinal cracks.The suggested approach seamlessly integrates model updating methods and the finite element(FE)approach to achieve an accurate and timely assessment of PCS conditions.This comprehensive examination scrutinizes the methodology by applying artificial cracks to the PCS.In addition to introducing this assessment approach,a detailed examination is conducted on a laboratory-simulated PCS featuring various combinations of longitudinal cracks measuring 40,80,and 120 cm in length.This systematic and rigorous approach ensures the reliability and robustness of the methodology.Ultimately,the parameters of cross-sectional area,moment of inertia,and modulus of elasticity,which significantly impact the performance of this sleeper,are explored and demonstrated through functional methodologies.The findings suggest that assessing and addressing damage should be conducted through a comprehensive and integrated procedure,taking into account the actual conditions of the PCS.Longitudinal cracks lead to a substantial decrease in the performance of these components in railway tracks.By applying the proposed methods,it is anticipated that the evaluation error for these components will be reduced by approximately 30%compared to visual inspections,particularly in predicting the extent of damage for cracks measuring up to 120 cm.This research has the potential to significantly enhance the evaluation of PCS performance and mitigate the impact of longitudinal cracks on the safety and longevity of ballasted railway tracks in desert areas.
基金support provided by the Technology Development Service Project Funds of China,Railway 5th Bureau Group Fifth Engineering Co.,Ltd and Yunnan Institute of Water&Hydropower Engineering Investigation,Design and Research(Grant No.20230525)the Major Science and Technology Special Plan of Yunnan Province Science and Technology Department(Grant No.202002AF080003)the Fundamental Research Funds for the Central Universities(Grant No.2022YJSSB04).
文摘The Haidong Water Conveyance Tunnel(HWCT),a notable engineering feat located within Dali City,Yunnan Province,China,represents an ultra-long water conveyance tunnel situated in a region characterized by medium in-situ stress conditions.As part of the Central Yunnan Water Diversion Project,this tunnel was specifically engineered for soft-rock environments.The excavation of such tunnels presents significant challenges due to rock mass deformation,commonly referred to as squeezing ground behavior.These challenges are exacerbated when navigating through diverse geological and geomorphological units,particularly in areas with complex geological conditions.To address these issues,an innovative active support system utilizing prestressed anchor cables was developed for the HWCT.This study provides a comprehensive analysis and comparison of rock mass behavior between two support systems:a conventional passive system employing steel arches and the proposed active system using prestressed anchor cables.The numerical modeling was performed using FLAC3D software to simulate various scenarios,while an extensive monitoring program was implemented in several representative tunnel sections to measure key parameters including rock mass stresses,displacements,internal forces in steel arches,and axial forces in anchor cables.The results from both the numerical simulations and field observations were systematically compared.The analyses demonstrated the superior performance of the active support system using prestressed anchor cables in the HWCT,significantly enhancing overall rock mass stability and effectively mitigating large deformation issues throughout the tunnel.
基金Project(2023YFC3805700) supported by the National Key Research and Development Program of ChinaProjects(42477166,42277174) supported by the National Natural Science Foundation of China+2 种基金Project(2024JCCXSB01) supported by the Fundamental Research Funds for the Central Universities,ChinaProject(KFJJ24-01M) supported by the State Key Laboratory of Explosion Science and Safety Protection,Beijing Institute of Technology,ChinaProject(HLCX-2024-04) supported by the Open Foundation of Collaborative Innovation Center of Green Development and Ecological Restoration of Mineral Resources,China。
文摘The surrounding rock is prone to large-scale loosening and failure after the excavation of shallow large-span caverns because of the thin overlying strata and large cross-section span.The rational design of bolt support is very important to the safety control of surrounding rock as a common support means.The control mechanism and design method of bolt support for shallow-buried large-span caverns is carried out.The calculation method of bolt prestress and length based on arched failure and collapsed failure mode is established.The influence mechanism of different influencing factors on the bolt prestress and length is clarified.At the same time,the constant resistance energy-absorbing bolt with high strength and high toughness is developed,and the comparative test of mechanical properties is carried out.On this basis,the design method of high prestressed bolt support for shallow-buried large-span caverns is put forward,and the field test is carried out in Qingdao metro station in China.The monitoring results show that the maximum roof settlement is 6.8 mm after the new design method is adopted,and the effective control of the shallow-buried large-span caverns is realized.The research results can provide theoretical and technical support for the safety control of shallow-buried large-span caverns.
基金Post-Doctoral Innovative Projects of Shandong Province(No.200703072)the National Natural Science Foundation of China(No.50574053)
文摘In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.
文摘To meet the demands for large space and flexible compartmentation ofbuildings, laminated vierendeel trasses are adopted in high-position transfer story structures.First the bearing characteristics are analyzed, in which reasonable stiffness ratio of the upperchord, middle chord, and lower chord is derived. Then combined with an actual engineering model (1:8similar ratio), the static loading and pseudo-dynamic tests of two models for laminated vierendeeltrass used in transfer story structures are conducted, in which one model adopts reinforcedconcrete, and the other adopts prestressed concrete and shape steel concrete. Seismic behaviors areanalyzed, including inter-story displacement, base shear-displacement skeleton curves, andequivalent viscosity-damping curves. A program is programmed to carry out the elasto-plastic dynamicanalysis, and displacement time-history curves of the two models are derived. The test and analysisresults show that the laminated vierendeel trass with prestressed concrete and shape steel concretehas excellent seismic behaviors. It can solve the disadvantages of laminated vierendeel trussesused in transfer story structures. Finally, some design suggestions are put forward, which can bereferenced by similar engineering.
文摘Based on the durability characteristics of prestressed concrete structures,the durability limit states of carbonation and chloride ion attack are defined, respectively.Durability predicting models on the basis of reliability mathematics and stochastic processes areconstructed, and the pure theoretical formulae of failure probability of prestressed concretestructures are analyzed. In addition, a simple durability design method for carbonation ofstructures is put forward. According to the analysis, the durability of prestressed concretestructures is superior to that of traditional structures. The research also indicates that theconcrete cover prescribed in the current code (GB 50010-2002) is not adequate. The rational coverthickness should notbe less than 35 or 45 mm according to carbonation or chloride ion attack,respectively.
文摘New high performance grouts with high volume stability and good fluidity were prepared with Portland cement and a multifunctional admixture (MFA). The theological characteristics and mechanical performance of the grouts were investigated. The addition of MFA effectively improves the pseudo-plasticity of the grout. The Ma cone flow time decreases obviously, and the bleeding rate tends to be zero. The deformation behaviors of fresh mixture and hardened grout are systematically studied. Mercury injection method (MIP), scanning electron microscopy (SEM) and X-ray diffractory analysis experiments are used to analyze the microstructure evolution of the grouts, which manifests that the co-action of the early bubble reaction and the latter ettringite crystallization ensure the volume stability throughout the whole hydration process and result in refined pore structure of the grout.
文摘With a concrete pavement slab prestressed, its load carrying capacity can be significantly increased; thus a thinner slab may be used for the same loading. Prestressing modify the structural behavior of the pavement slab and there is a greater resistance to impact, vibration and overloading. This paper discusses the major design considerations necessary in the successful construction of prestressed concrete pavements and presents a design procedure developed to predict the compressive stress due to prestressing in the pavements at early stage, during service and after cracking. Variation in the approach for repetitive and nonrepetitive loads is clearly distinguished. Check on the recovery after cracking for overloading in prestressed pavements is also needed. Finally, a design example is illustrated the application of the approach developed.
