By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture defor...By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.展开更多
The pressure-induced structural transitions of ZnTe are investigated at pressures up to 59.2 GPa in a diamond anvil cell by using synchrotron powder x-ray diffraction method. A phase transition from the initial zinc b...The pressure-induced structural transitions of ZnTe are investigated at pressures up to 59.2 GPa in a diamond anvil cell by using synchrotron powder x-ray diffraction method. A phase transition from the initial zinc blende （ZB, ZnTe-Ⅰ） structure to a cinnabar phase （ZnTe-Ⅱ） is observed at 9.6 GPa, followed by a high pressure orthorhombic phase （ZnTe-Ⅲ） with Cmcm symmetry at 12.1 GPa. The ZB, cinnabar （space group P3121）, Cmcm, P31 and rock salt structures of ZnTe are investigated by using density functional theory calculations. Based on the experiments and calculations, the ZnTe-Ⅱ phase is determined to have a cinnabar structure rather than a P3 1 symmetry.展开更多
Internal arcs cause a rapid increase in pressure in electrical installations. The type of insulation gas has influence on pressure development. Typically SF6 is used incompact metal-clad switchgear, however, it has a ...Internal arcs cause a rapid increase in pressure in electrical installations. The type of insulation gas has influence on pressure development. Typically SF6 is used incompact metal-clad switchgear, however, it has a high global warming potential. Because of this, the replacement of SF6 by alternative gases such as CO2 is under discussion. The pressure developments in a closed vessel filled with air, SF6 and CO2 are measured and compared. During internal arcing in gas-insulated switchgear, overpressure causes a rupture of a burst plate and hot gas escapes into the surrounding room mixing with air. In order to predict the pressure development in electrical installations reliably, the portion of energy causing pressure rise, arc voltage as well as reliable gas data i.e., thermodynamic and transport properties, must be known in a wide range of pressure and temperature. These data are up to now not available for CO2/air mixtures. The thermodynamic properties are directly calculated from the number densities, internal partition functions and enthalpies of formation. The transport coefficients are deduced using the Chapman-Enskog method. Comparing measured and calculated pressure developments in a test arrangement demonstrates the quality of the calculation approach.展开更多
An analytical model of a ring with six yield hinges and two deformable arc segments is presented for. the prediction of the buckle propagation pressure and initiation pressure in offshore pipelines. The configuration ...An analytical model of a ring with six yield hinges and two deformable arc segments is presented for. the prediction of the buckle propagation pressure and initiation pressure in offshore pipelines. The configuration of a fully collapsed ring is considered as a real dumbbell shape with a line touch between two 'bells', instead of the dumbbell shape with a point touch of two diametrically opposite points. Calculations are performed assuming that the dominant effect on the plastic energy dissipation has the circumferential bending mode. For the linear strain-hardening materials it is found that theoretical predictions based on the above model for both propagation pressure and initiation nressure are in good agreement with experimental results of Kyriakides et al.展开更多
基金Supported by the Joint Fund Key Program of the National Natural Science Foundation of China(U21B2069)Key Research and Development Program of Shandong Province(2022CXGC020407)Basic Science Center Program of the National Natural Science Foundation of China(52288101)。
文摘By comprehensively considering the influences of temperature and pressure on fluid density in high temperature and high pressure(HTHP)wells in deepwater fractured formations and the effects of formation fracture deformation on well shut-in afterflow,this study couples the shut-in temperature field model,fracture deformation model,and gas flow model to establish a wellbore pressure calculation model incorporating thermo-hydro-mechanical coupling effects.The research analyzes the governing patterns of geothermal gradient,bottomhole pressure difference,drilling fluid pit gain,and kick index on casing head pressure,and establishes a shut-in pressure determination chart for HPHT wells based on coupled model calculation results.The study results show:geothermal gradient,bottomhole pressure difference,and drilling fluid pit gain exhibit positive correlations with casing head pressure;higher kick indices accelerate pressure rising rates while maintaining a constant maximum casing pressure;validation against field case data demonstrates over 95%accuracy in predicting wellbore pressure recovery after shut-in,with the pressure determination chart achieving 97.2%accuracy in target casing head pressure prediction and 98.3%accuracy in target shut-in time.This method enables accurate acquisition of formation pressure after HPHT well shut-in,providing reliable technical support for subsequent well control measures and ensuring safe and efficient development of deepwater and deep hydrocarbon reservoirs.
基金Supported by the National Natural Science Foundation of China under Grant No 11474280the National Basic Research Program of China under Grant No 2011CB808200the Chinese Academy of Sciences under Grant Nos KJCX2-SW-N20 and KJCX2-SW-N03
文摘The pressure-induced structural transitions of ZnTe are investigated at pressures up to 59.2 GPa in a diamond anvil cell by using synchrotron powder x-ray diffraction method. A phase transition from the initial zinc blende （ZB, ZnTe-Ⅰ） structure to a cinnabar phase （ZnTe-Ⅱ） is observed at 9.6 GPa, followed by a high pressure orthorhombic phase （ZnTe-Ⅲ） with Cmcm symmetry at 12.1 GPa. The ZB, cinnabar （space group P3121）, Cmcm, P31 and rock salt structures of ZnTe are investigated by using density functional theory calculations. Based on the experiments and calculations, the ZnTe-Ⅱ phase is determined to have a cinnabar structure rather than a P3 1 symmetry.
文摘Internal arcs cause a rapid increase in pressure in electrical installations. The type of insulation gas has influence on pressure development. Typically SF6 is used incompact metal-clad switchgear, however, it has a high global warming potential. Because of this, the replacement of SF6 by alternative gases such as CO2 is under discussion. The pressure developments in a closed vessel filled with air, SF6 and CO2 are measured and compared. During internal arcing in gas-insulated switchgear, overpressure causes a rupture of a burst plate and hot gas escapes into the surrounding room mixing with air. In order to predict the pressure development in electrical installations reliably, the portion of energy causing pressure rise, arc voltage as well as reliable gas data i.e., thermodynamic and transport properties, must be known in a wide range of pressure and temperature. These data are up to now not available for CO2/air mixtures. The thermodynamic properties are directly calculated from the number densities, internal partition functions and enthalpies of formation. The transport coefficients are deduced using the Chapman-Enskog method. Comparing measured and calculated pressure developments in a test arrangement demonstrates the quality of the calculation approach.
基金Project supported by National Natural Science Foundation
文摘An analytical model of a ring with six yield hinges and two deformable arc segments is presented for. the prediction of the buckle propagation pressure and initiation pressure in offshore pipelines. The configuration of a fully collapsed ring is considered as a real dumbbell shape with a line touch between two 'bells', instead of the dumbbell shape with a point touch of two diametrically opposite points. Calculations are performed assuming that the dominant effect on the plastic energy dissipation has the circumferential bending mode. For the linear strain-hardening materials it is found that theoretical predictions based on the above model for both propagation pressure and initiation nressure are in good agreement with experimental results of Kyriakides et al.
