With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBS...With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.展开更多
Background:Vitamin D deficiency is a global health concern,and exploring natural sources,particularly traditional medicinal plants,may offer a novel approach to addressing this widespread issue.This study investigates...Background:Vitamin D deficiency is a global health concern,and exploring natural sources,particularly traditional medicinal plants,may offer a novel approach to addressing this widespread issue.This study investigates the prevalence of vitamin D_(2) and D_(3) in indigenous medicinal plants,such as Solanum torvum,Solanum nigrum,Solanum xanthocarpum,Psoralea cordifolia,Cissus quadrangularis,and the resin Commiphora mukul,and Laccifer lacca.Methods:Vitamin D_(2) and D_(3) compounds were detected and quantified using advanced reversed-phase high-performance liquid chromatography.A refined technique for sample preparation was employed,which involved an overnight cold saponification process.This method was used to enhance the extraction of vitamin D molecules.The accuracy and reliability of the HPLC method were validated using liquid chromatography-mass spectrometry(LC-MS)/MS analysis.Results:The investigation revealed the remarkable presence of vitamin D_(2) and D_(3) in the chosen plant specimens.Significant amounts of vitamin D_(2) were found in Laccifer lacca and Psoralea cordifolia,however,vitamin D_(3) was only detected in Cissus quadrangularis and Solanum xanthocarpum.The revised approaches exhibited significant precision and accuracy,hence enhancing the reliability of the findings.Conclusion:The identification of vitamin D_(2) and D_(3) in these plants underscores their historical therapeutic significance for supporting bone health and indicates their potential as beneficial natural sources of vitamin D.This research advances understanding of the phytochemical features of these plants,facilitating future development of nutraceuticals and therapeutic applications.展开更多
Abstract Heavy metals in water can be deposited on graphite flakes, which can be used as an enrichment method for laser-induced breakdown spectroscopy （LIBS） and is studied in this paper. The graphite samples were p...Abstract Heavy metals in water can be deposited on graphite flakes, which can be used as an enrichment method for laser-induced breakdown spectroscopy （LIBS） and is studied in this paper. The graphite samples were prepared with an automatic device, which was composed of a loading and unloading module, a quantitatively adding solution module, a rapid heating and drying module and a precise rotating module. The experimental results showed that the sample preparation methods had no significant effect on sample distribution and the LIBS signal accumulated in 20 pulses was stable and repeatable. With an increasing amount of the sample solution on the graphite flake, the peak intensity at Cu I 324.75 nm accorded with the exponential function with a correlation coefficient of 0.9963 and the background intensity remained unchanged. The limit of detection （LOD） was calculated through linear fitting of the peak intensity versus the concentration. The LOD decreased rapidly with an increasing amount of sample solution until the amount exceeded 20 mL and the correlation coefficient of exponential function fitting was 0.991. The LOD of Pb, Ni, Cd, Cr and Zn after evaporating different amounts of sample solution on the graphite flakes was measured and the variation tendency of their LOD with sample solution amounts was similar to the tendency for Cu. The experimental data and conclusions could provide a reference for automatic sample preparation and heavy metal in situ detection.展开更多
A protocol for enrichment and adsorption of karyocyte from whole blood by using magnetic nanometer beads as solid phase absorbents was presented. The PCR amplification could be accomplished by using the nanobeads wit...A protocol for enrichment and adsorption of karyocyte from whole blood by using magnetic nanometer beads as solid phase absorbents was presented. The PCR amplification could be accomplished by using the nanobeads with karyocyte as template directly and the PCR products were applied on an oligonucleotide array to do gene typing. The HLA A PCR amplification system and a small HLA A oligonucleotide microarray were applied as the platform and an experiment protocol of separating karyocyte from whole blood using the magnetic nanometer beads (Fe 2O 3) were set up. The experimental conditions were also discussed. It showed that pH level of PBS eluent, Taq enzyme quantity and fragment length of products could influent the amplification results, and the magnetic nano beads could succeed in sample preparation in microarray to provide a promising way in automatic detection and lab on a chip.展开更多
The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional...The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors（acetonitrile（%）.formic acid（%） and boiling time（min）） were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability（D） approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.展开更多
1 Scope This standard specifies the definition and test methods of flowability of dense and insulating refractory castables, and moulding equipment, moulding methods, curing and drying conditions of castables samples.
The assay of acyclovir in plasma seems to be a challenge because of its high hydrophily.In our present study,a reversed-phase high-performance liquid chromatography(RP-HPLC)method for the determination of acyclovir in...The assay of acyclovir in plasma seems to be a challenge because of its high hydrophily.In our present study,a reversed-phase high-performance liquid chromatography(RP-HPLC)method for the determination of acyclovir in rat plasma was described and validated in drug-drug interaction(DDI)between gefitinib and acyclovir in rats.The analytes were separated with gradient elution on C18 column(4.6 mm×250 mm,5μm),and the peaks were recorded using ultraviolet detector at a wavelength of 254 nm.Protein precipitation followed by methyl tertiary butyl ether extraction was used for sample preparation.The calibration curve was established between 0.2 and 40μg/mL(r^(2)=0.9999).The intra-and inter-day precisions were all less than 8%,and all the biases were not more than 10%.This new method was successfully applied to a DDI study between gefitinib and acyclovir in rats.Gefitinib up-regulated the absorption of acyclovir by about three times,and our findings guided the clinical co-administration of epidermal growth factor receptor-tyrosine kinase inhibitors(EGFR-TKIs)with acyclovir.展开更多
Vacuum loading has been examined as a way of preparing uniformly consolidated soft clay samples. The facility and loading procedure are described in this paper. An analytical solution to the three dimensional consolid...Vacuum loading has been examined as a way of preparing uniformly consolidated soft clay samples. The facility and loading procedure are described in this paper. An analytical solution to the three dimensional consolidation equation is derived for estimating the degree of consolidation of the soil sample with vacuum loading. The given example shows that the predicted degree of consolidation of a soft clay bulk with vacuum loading is close to that measured in the consolidation process.展开更多
Capillary electrophoresis （CE） coupled with mass spectrometry （MS） with a sheath liquid interface is nowadays recognized as a powerful separation technique for drugs and metabolites analysis in human urine and can...Capillary electrophoresis （CE） coupled with mass spectrometry （MS） with a sheath liquid interface is nowadays recognized as a powerful separation technique for drugs and metabolites analysis in human urine and can be applied in numerous fields such as clinical toxicology, drug substitution monitoring, forensic sciences and antidoping. With an acidic background electrolyte containing 15 mM ammonium formate at pH 2.5 and a sheath liquid consisting in a mixture of isopropanol/water （50：50, v/v） with 0.5% formic acid, CE-ESI-MS in positive mode demonstrated excellent performance for simultaneous analysis of basic drugs of abuse and metabolites in urine （e.g. cocaine, amphetamine, morphine and phase II metabolites）. To achieve the desired level of sensitivity, two injection modes and three sample pre-treatments were evaluated. The detection of basic drugs and phase Ⅱ metabolites in diluted urine was achieved at concentrations above 1μg/mL. In order to enhance sensitivity, a sample preparation was required. A liquid-liquid extraction （LLE） was compared with solid-phase extraction. LLE was performed at alkaline pH and samples were electrokinetically injected. A chemometric approach （Doehlert design） was carried out in order to determine optimized injection parameters. Limits of detection （LOD） down to 10 ng/mL were reached with field-amplified sample injection but phase II metabolites were not extracted. Therefore, instead of LLE a SPE was performed on C 18 sorbent, and elution fraction after washing step containing phase Ⅱ metabolites was loaded on mixed-mode anion exchanger cartridges. After electrokinetic injection, this two-step SPE allowed LOD ca. 10 ng/mL for drugs and phase Ⅱ metabolites.展开更多
Flue gas containing volatile elements, fine fly ash particulates not retained by particle control devices, and limestone are the most important sources of trace and major elements (TMEs) in wet flue gas desulphurizati...Flue gas containing volatile elements, fine fly ash particulates not retained by particle control devices, and limestone are the most important sources of trace and major elements (TMEs) in wet flue gas desulphurization (WFGD) gypsum. In this study, samples of gypsum slurry were separated into fine and coarse fractions. Multi-elemental analysis of 45 elements in the different size fractions of gypsum, slurry waters and lignite were performed by k0-INAA (k0-instrumental neutron activation analyses). The study found that the volatile elements (Hg, Se and halogens) in the flue gas accumulate in the fine fractions of gypsum. Moreover, the concentrations of most TMEs are considerably higher in the fine fractions compared to the coarse fractions. The exceptions are Ca and Sr that primarily originate from the limestone. Variations of TMEs in the finer fractions are dependent on the presence of CaSO4·2H2O that is the main constituent of the coarse fraction. Consequently, the content of TMEs in the fine fraction is highly dependent on the efficiency of separating the fine fraction from the coarse fraction. Separation of the finer fraction, representing about 10% of the total gypsum, offers the possibility to remove effectively TMEs from WFGD slurry.展开更多
Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomic...Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomics garners widespread application across diverse fields including drug research and development,early disease detection,toxicology,food and nutrition science,biology,prescription,and chinmedomics,among others.Metabolomics serves as an effective characterization technique,offering insights into physiological process alterations in vivo.These changes may result from various exogenous factors like environmental conditions,stress,medications,as well as endogenous elements including genetic and protein-based influences.The potential scientific outcomes gleaned from these insights have catalyzed the formulation of innovative methods,poised to further broaden the scope of this domain.Today,metabolomics has evolved into a valuable and widely accepted instrument in the life sciences.However,comprehensive reviews focusing on the sample preparation and analytical methodologies employed in metabolomics within the life sciences are surprisingly scant.This review aims to fill that gap,providing an overview of current trends and recent advancements in metabolomics.Particular emphasis is placed on sample preparation,sophisticated analytical techniques,and their applications in life science research.展开更多
The presence of toxic elements in paper and board food contact materials(FCMs)has been previously shown by various studies employing different sample preparation methods.This study elucidates the influence of migratio...The presence of toxic elements in paper and board food contact materials(FCMs)has been previously shown by various studies employing different sample preparation methods.This study elucidates the influence of migration methods on the migration of toxic elements from recycled paper FCMs to food simulants and compares these methods with exhaustive extraction approaches.Migration samples were prepared with four food simulants as specified in the Commission Regulation(EU)10/2011:3%(volume fraction)acetic acid,10%(volume fraction)and 50%(volume fraction)ethanol,and Tenax.The extraction process underestimated the number and quantity of elements.Migration methodologies revealed distinct element transfer patterns influenced by the physicochemical properties of the food simulants.Toxic elements,including aluminum,cobalt,nickel,arsenic,lead,cadmium,barium,and uranium,were detected in quantities exceeding safety reference values.These findings underscore the need for harmonized migration testing and regulatory-specific migration limits.展开更多
Deep eutectic solvents(DESs)have drawn considerable attention as a new type of green solvent since they were reported.Subsequent studies have shown that DESs have the potential to be used as“designable”solvents,whic...Deep eutectic solvents(DESs)have drawn considerable attention as a new type of green solvent since they were reported.Subsequent studies have shown that DESs have the potential to be used as“designable”solvents,which means that the precursors of DESs with different structures and properties can be screened to customize DESs for specific functions.Researchers have found that during the sample preparation process involving DESs,the specific properties of some“smart”DESs can be switched by directing external driving forces,leading to a reversible phase transition of the target solution.These"smart"DESs are called switchable deep eutectic solvents(SDESs).The advent of SDES simplifies the sample pretreatment steps,reduces the use of organic solvents,and makes solvents easy to recycle,which matches the concept of green and sustainable chemistry.Compared with the number of previous experimental studies,the reviews and summaries on SDESs are rare.Therefore,this review made a summary of the concept and research progress of SDESs based on some related works in the past decade,including composition and type,characterization,switching mechanism,etc.It is expected to provide a certain reference and guidance for the subsequent in-depth research of SDESs in the analytical sample pretreatment.展开更多
Improved analytical methods for the metabolomic profiling of tissue samples are constantly needed.Currently,conventional sample preparation methods often involve tissue biopsy and/or homogenization,which disrupts the ...Improved analytical methods for the metabolomic profiling of tissue samples are constantly needed.Currently,conventional sample preparation methods often involve tissue biopsy and/or homogenization,which disrupts the endogenous metabolome.In this study,solid-phase microextraction(SPME)fibers were used to monitor changes in endogenous compounds in homogenized and intact ovine lung tissue.Following SPME,a Biocrates AbsoluteIDQ assay was applied to make a downstream targeted metabolomics analysis and confirm the advantages of in vivo SPME metabolomics.The AbsoluteIDQ kit enabled the targeted analysis of over 100 metabolites via solid-liquid extraction and SPME.Statistical analysis revealed significant differences between conventional liquid extractions from homogenized tissue and SPME results for both homogenized and intact tissue samples.In addition,principal component analysis revealed separated clustering among all the three sample groups,indicating changes in the metabolome due to tissue homogenization and the chosen sample preparation method.Furthermore,clear differences in free metabolites were observed when extractions were performed on the intact and homogenized tissue using identical SPME procedures.Specifically,a direct comparison showed that 47 statistically distinct metabolites were detected between the homogenized and intact lung tissue samples(P<0.05)using mixed-mode SPME fibers.These changes were probably due to the disruptive homogenization of the tissue.This study's findings highlight both the importance of sample preparation in tissue-based metabolomics studies and SPME's unique ability to perform minimally invasive extractions without tissue biopsy or homogenization while providing broad metabolite coverage.展开更多
The quantitative determination of heavy metals in aquatic products is of great importance for food security issues.Laser-induced breakdown spectroscopy(LIBS)has been used in a variety of foodstuff analysis,but is stil...The quantitative determination of heavy metals in aquatic products is of great importance for food security issues.Laser-induced breakdown spectroscopy(LIBS)has been used in a variety of foodstuff analysis,but is still limited by its low sensitivity when targeting trace heavy metals.In this work,we compare three sample enrichment methods,namely drying,carbonization,and ashing,for increasing detection sensitivity by LIBS analysis for Pb and Cr in oyster samples.The results demonstrate that carbonization can remove a significant amount of the contributions of organic elements C,H,N and O;meanwhile,the signals of the metallic elements such as Cu,Pb,Sr,Ca,Cr and Mg are enhanced by3–6 times after carbonization,and further enhanced by 5–9 times after ashing.Such enhancement is not only due to the more concentrated metallic elements in the sample compared to the dried ones,but also the unifying of the matter in carbonized and ashed samples from which higher plasma temperature and electron density are observed.This condition favors the detection of trace elements.According to the calibration curves with univariate and multivariate analysis,the ashing method is considered to be the best choice.The limits of detection of the ashing method are 0.52 mg kg-1 for Pb and0.08 mg kg-1 for Cr,which can detect the presence of heavy metals in the oysters exceeding the maximum limits of Pb and Cr required by the Chinese national standard.This method provides a promising application for the heavy metal contamination monitoring in the aquatic product industry.展开更多
Based on years of practice and survey methods of grassland resources at home and abroad, the technical problems that may occur in the survey process are analyzed, the preparatory work before survey, specific content o...Based on years of practice and survey methods of grassland resources at home and abroad, the technical problems that may occur in the survey process are analyzed, the preparatory work before survey, specific content of field survey and sample processing and analysis and specimen preparation are elaborated. Moreover, the announcements of major technical methods are also described in details.展开更多
Antimicrobial peptides(AMP)are small proteins that play critical roles in host defense against microbe invasion.Many AMPs disrupt the cellular membrane of microbe,while the mechanism of action of AMPs can be very soph...Antimicrobial peptides(AMP)are small proteins that play critical roles in host defense against microbe invasion.Many AMPs disrupt the cellular membrane of microbe,while the mechanism of action of AMPs can be very sophisticated.Solid-state NMR(SSNMR)technique is powerful in characterizing the mechanism of AMPs in vivo and in vitro.This review summarizes the recent advance of SSNMR technique in AMP mechanisms characterization.We highlight the sample preparation approaches,the SSNMR spectroscopic methods,and a number of outstanding examples of AMP mechanisms elucidated via SSNMR spectroscopy.展开更多
For identifying and quantifying prohibited substances,solid-phase microextraction(SPME)continues to arouse interest as a sample preparation method.However,the practical implementation of this method in routine laborat...For identifying and quantifying prohibited substances,solid-phase microextraction(SPME)continues to arouse interest as a sample preparation method.However,the practical implementation of this method in routine laboratory testing is currently hindered by the limited number of coatings compatible with the ubiquitous high-performance liquid chromatography(HPLC)systems.Only octadecyl(C18)and polydimethylsiloxane/divinylbenzene ligands are currently marketed for this purpose.To address this situation,the present study evaluated 12 HPLC-compatible coatings,including several chemistries not currently used in this application.The stationary phases of SPME devices in the geometry of thin filmcoated blades were prepared by applying silica particles bonded with various functional ligands(C18,octyl,phenyl-hexyl,3-cyanopropyl,benzenesulfonic acid,and selected combinations of these),as well as unbonded silica,to a metal support.Most of these chemistries have not been previously used as microextraction coatings.The 48 most commonly misused substances were selected to assess the extraction efficacy of each coating,and eight desorption solvent compositions were used to optimize the desorption conditions.All samples were analyzed using an HPLC system coupled with triple quadrupole tandem mass spectrometry.This evaluation enables selection of the best-performing coatings for quantifying prohibited substances and investigates the relationship between extraction efficacy and the physicochemical characteristics of the analytes.Ultimately,using the most suitable coatings is essential for trace-level analysis of chemically diverse prohibited substances.展开更多
基金Project (192450/I30) supported by the Norwegian Research Council under the Strategic University Program
文摘With the help of FESEM, high resolution electron backscatter diffraction can investigate the grains/subgrains as small as a few tens of nanometers with a good angular resolution （~0.5°）. Fast development of EBSD speed （up to 1100 patterns per second） contributes that the number of published articles related to EBSD has been increasing sharply year by year. This paper reviews the sample preparation, parameters optimization and analysis of EBSD technique, emphasizing on the investigation of ultrafine grained and nanostructured materials processed by severe plastic deformation （SPD）. Detailed and practical parameters of the electropolishing, silica polishing and ion milling have been summarized. It is shown that ion milling is a real universal and promising polishing method for EBSD preparation of almost all materials. There exists a maximum value of indexed points as a function of step size. The optimum step size depends on the magnification and the board resolution/electronic step size. Grains/subgrains and texture, and grain boundary structure are readily obtained by EBSD. Strain and stored energy may be analyzed by EBSD.
文摘Background:Vitamin D deficiency is a global health concern,and exploring natural sources,particularly traditional medicinal plants,may offer a novel approach to addressing this widespread issue.This study investigates the prevalence of vitamin D_(2) and D_(3) in indigenous medicinal plants,such as Solanum torvum,Solanum nigrum,Solanum xanthocarpum,Psoralea cordifolia,Cissus quadrangularis,and the resin Commiphora mukul,and Laccifer lacca.Methods:Vitamin D_(2) and D_(3) compounds were detected and quantified using advanced reversed-phase high-performance liquid chromatography.A refined technique for sample preparation was employed,which involved an overnight cold saponification process.This method was used to enhance the extraction of vitamin D molecules.The accuracy and reliability of the HPLC method were validated using liquid chromatography-mass spectrometry(LC-MS)/MS analysis.Results:The investigation revealed the remarkable presence of vitamin D_(2) and D_(3) in the chosen plant specimens.Significant amounts of vitamin D_(2) were found in Laccifer lacca and Psoralea cordifolia,however,vitamin D_(3) was only detected in Cissus quadrangularis and Solanum xanthocarpum.The revised approaches exhibited significant precision and accuracy,hence enhancing the reliability of the findings.Conclusion:The identification of vitamin D_(2) and D_(3) in these plants underscores their historical therapeutic significance for supporting bone health and indicates their potential as beneficial natural sources of vitamin D.This research advances understanding of the phytochemical features of these plants,facilitating future development of nutraceuticals and therapeutic applications.
基金supported by National Natural Science Foundation of China(No.60908018)National High Technology Research and Development Program of China(No.2013AA065502)Anhui Province Outstanding Youth Science Fund of China(No.1108085J19)
文摘Abstract Heavy metals in water can be deposited on graphite flakes, which can be used as an enrichment method for laser-induced breakdown spectroscopy （LIBS） and is studied in this paper. The graphite samples were prepared with an automatic device, which was composed of a loading and unloading module, a quantitatively adding solution module, a rapid heating and drying module and a precise rotating module. The experimental results showed that the sample preparation methods had no significant effect on sample distribution and the LIBS signal accumulated in 20 pulses was stable and repeatable. With an increasing amount of the sample solution on the graphite flake, the peak intensity at Cu I 324.75 nm accorded with the exponential function with a correlation coefficient of 0.9963 and the background intensity remained unchanged. The limit of detection （LOD） was calculated through linear fitting of the peak intensity versus the concentration. The LOD decreased rapidly with an increasing amount of sample solution until the amount exceeded 20 mL and the correlation coefficient of exponential function fitting was 0.991. The LOD of Pb, Ni, Cd, Cr and Zn after evaporating different amounts of sample solution on the graphite flakes was measured and the variation tendency of their LOD with sample solution amounts was similar to the tendency for Cu. The experimental data and conclusions could provide a reference for automatic sample preparation and heavy metal in situ detection.
文摘A protocol for enrichment and adsorption of karyocyte from whole blood by using magnetic nanometer beads as solid phase absorbents was presented. The PCR amplification could be accomplished by using the nanobeads with karyocyte as template directly and the PCR products were applied on an oligonucleotide array to do gene typing. The HLA A PCR amplification system and a small HLA A oligonucleotide microarray were applied as the platform and an experiment protocol of separating karyocyte from whole blood using the magnetic nanometer beads (Fe 2O 3) were set up. The experimental conditions were also discussed. It showed that pH level of PBS eluent, Taq enzyme quantity and fragment length of products could influent the amplification results, and the magnetic nano beads could succeed in sample preparation in microarray to provide a promising way in automatic detection and lab on a chip.
基金the Special Research Fund of Ghent University(BOF 01D23812 to Lien Taevernier and BOF O1J22510 to Evelien Wynendaele and Professor Bart De Spiegeleer)the Institute for the Promotion of Innovation through Science and Technology in Flanders(IWT 101529 to Matthias D'Hondt)for their financial funding
文摘The sample preparation of samples conlaining bovine serum albumin（BSA）,e.g..as used in transdermal Franz diffusion cell（FDC） solutions,was evaluated using an analytical qualily-by-design（QbD）approach.Traditional precipitation of BSA by adding an equal volume of organic solvent,often successfully used with conventional HPLC-PDA,was found insufficiently robust when novel fused-core HPLC and/or UPLC-MS methods were used.In this study,three factors（acetonitrile（%）.formic acid（%） and boiling time（min）） were included in the experimental design to determine an optimal and more suitable sample treatment of BSAcontaining FDC solutions.Using a QbD and Derringer desirability（D） approach,combining BSA loss,dilution factor and variability,we constructed an optimal working space with the edge of failure defined as D〈0.9.The design space is modelled and is confirmed to have an ACN range of 83 ± 3% and FA content of 1 ±0.25%.
文摘1 Scope This standard specifies the definition and test methods of flowability of dense and insulating refractory castables, and moulding equipment, moulding methods, curing and drying conditions of castables samples.
基金Discipline and Master's Site Construction Project of Guiyang University by Guiyang City Financial Support Guiyang University (Grant No. SY-2020)Guizhou Biopharmaceutical Engineering Research Center (Grant No. QJH KYZ[2019]051)。
文摘The assay of acyclovir in plasma seems to be a challenge because of its high hydrophily.In our present study,a reversed-phase high-performance liquid chromatography(RP-HPLC)method for the determination of acyclovir in rat plasma was described and validated in drug-drug interaction(DDI)between gefitinib and acyclovir in rats.The analytes were separated with gradient elution on C18 column(4.6 mm×250 mm,5μm),and the peaks were recorded using ultraviolet detector at a wavelength of 254 nm.Protein precipitation followed by methyl tertiary butyl ether extraction was used for sample preparation.The calibration curve was established between 0.2 and 40μg/mL(r^(2)=0.9999).The intra-and inter-day precisions were all less than 8%,and all the biases were not more than 10%.This new method was successfully applied to a DDI study between gefitinib and acyclovir in rats.Gefitinib up-regulated the absorption of acyclovir by about three times,and our findings guided the clinical co-administration of epidermal growth factor receptor-tyrosine kinase inhibitors(EGFR-TKIs)with acyclovir.
文摘Vacuum loading has been examined as a way of preparing uniformly consolidated soft clay samples. The facility and loading procedure are described in this paper. An analytical solution to the three dimensional consolidation equation is derived for estimating the degree of consolidation of the soil sample with vacuum loading. The given example shows that the predicted degree of consolidation of a soft clay bulk with vacuum loading is close to that measured in the consolidation process.
文摘Capillary electrophoresis （CE） coupled with mass spectrometry （MS） with a sheath liquid interface is nowadays recognized as a powerful separation technique for drugs and metabolites analysis in human urine and can be applied in numerous fields such as clinical toxicology, drug substitution monitoring, forensic sciences and antidoping. With an acidic background electrolyte containing 15 mM ammonium formate at pH 2.5 and a sheath liquid consisting in a mixture of isopropanol/water （50：50, v/v） with 0.5% formic acid, CE-ESI-MS in positive mode demonstrated excellent performance for simultaneous analysis of basic drugs of abuse and metabolites in urine （e.g. cocaine, amphetamine, morphine and phase II metabolites）. To achieve the desired level of sensitivity, two injection modes and three sample pre-treatments were evaluated. The detection of basic drugs and phase Ⅱ metabolites in diluted urine was achieved at concentrations above 1μg/mL. In order to enhance sensitivity, a sample preparation was required. A liquid-liquid extraction （LLE） was compared with solid-phase extraction. LLE was performed at alkaline pH and samples were electrokinetically injected. A chemometric approach （Doehlert design） was carried out in order to determine optimized injection parameters. Limits of detection （LOD） down to 10 ng/mL were reached with field-amplified sample injection but phase II metabolites were not extracted. Therefore, instead of LLE a SPE was performed on C 18 sorbent, and elution fraction after washing step containing phase Ⅱ metabolites was loaded on mixed-mode anion exchanger cartridges. After electrokinetic injection, this two-step SPE allowed LOD ca. 10 ng/mL for drugs and phase Ⅱ metabolites.
基金funded by the Slovenian Research Agency program P1-0143 and project L1-5446 and the young researchers programsupported by the EMPIR MercOx project(16ENV01).
文摘Flue gas containing volatile elements, fine fly ash particulates not retained by particle control devices, and limestone are the most important sources of trace and major elements (TMEs) in wet flue gas desulphurization (WFGD) gypsum. In this study, samples of gypsum slurry were separated into fine and coarse fractions. Multi-elemental analysis of 45 elements in the different size fractions of gypsum, slurry waters and lignite were performed by k0-INAA (k0-instrumental neutron activation analyses). The study found that the volatile elements (Hg, Se and halogens) in the flue gas accumulate in the fine fractions of gypsum. Moreover, the concentrations of most TMEs are considerably higher in the fine fractions compared to the coarse fractions. The exceptions are Ca and Sr that primarily originate from the limestone. Variations of TMEs in the finer fractions are dependent on the presence of CaSO4·2H2O that is the main constituent of the coarse fraction. Consequently, the content of TMEs in the fine fraction is highly dependent on the efficiency of separating the fine fraction from the coarse fraction. Separation of the finer fraction, representing about 10% of the total gypsum, offers the possibility to remove effectively TMEs from WFGD slurry.
基金supported by the Science Foundation of Heilongjiang Administration of Traditional Chinese Medicine(No.2018-21).
文摘Over the past decade,the swift advancement of metabolomics can be credited to significant progress in technologies such as mass spectrometry,nuclear magnetic resonance,and multivariate statistics.Currently,metabolomics garners widespread application across diverse fields including drug research and development,early disease detection,toxicology,food and nutrition science,biology,prescription,and chinmedomics,among others.Metabolomics serves as an effective characterization technique,offering insights into physiological process alterations in vivo.These changes may result from various exogenous factors like environmental conditions,stress,medications,as well as endogenous elements including genetic and protein-based influences.The potential scientific outcomes gleaned from these insights have catalyzed the formulation of innovative methods,poised to further broaden the scope of this domain.Today,metabolomics has evolved into a valuable and widely accepted instrument in the life sciences.However,comprehensive reviews focusing on the sample preparation and analytical methodologies employed in metabolomics within the life sciences are surprisingly scant.This review aims to fill that gap,providing an overview of current trends and recent advancements in metabolomics.Particular emphasis is placed on sample preparation,sophisticated analytical techniques,and their applications in life science research.
基金funded by the Netherlands Food and Consumer Product Safety Authority(NVWA)under the Ministry of Agriculture,Nature and Food Quality of the Netherlands with funding number 1400011703.
文摘The presence of toxic elements in paper and board food contact materials(FCMs)has been previously shown by various studies employing different sample preparation methods.This study elucidates the influence of migration methods on the migration of toxic elements from recycled paper FCMs to food simulants and compares these methods with exhaustive extraction approaches.Migration samples were prepared with four food simulants as specified in the Commission Regulation(EU)10/2011:3%(volume fraction)acetic acid,10%(volume fraction)and 50%(volume fraction)ethanol,and Tenax.The extraction process underestimated the number and quantity of elements.Migration methodologies revealed distinct element transfer patterns influenced by the physicochemical properties of the food simulants.Toxic elements,including aluminum,cobalt,nickel,arsenic,lead,cadmium,barium,and uranium,were detected in quantities exceeding safety reference values.These findings underscore the need for harmonized migration testing and regulatory-specific migration limits.
基金financially supported by the National Natural Science Foundation of China(No.22174129)the Natural Science Foundation of Zhejiang Province(No.LZY21E030001)。
文摘Deep eutectic solvents(DESs)have drawn considerable attention as a new type of green solvent since they were reported.Subsequent studies have shown that DESs have the potential to be used as“designable”solvents,which means that the precursors of DESs with different structures and properties can be screened to customize DESs for specific functions.Researchers have found that during the sample preparation process involving DESs,the specific properties of some“smart”DESs can be switched by directing external driving forces,leading to a reversible phase transition of the target solution.These"smart"DESs are called switchable deep eutectic solvents(SDESs).The advent of SDES simplifies the sample pretreatment steps,reduces the use of organic solvents,and makes solvents easy to recycle,which matches the concept of green and sustainable chemistry.Compared with the number of previous experimental studies,the reviews and summaries on SDESs are rare.Therefore,this review made a summary of the concept and research progress of SDESs based on some related works in the past decade,including composition and type,characterization,switching mechanism,etc.It is expected to provide a certain reference and guidance for the subsequent in-depth research of SDESs in the analytical sample pretreatment.
基金supported by the Natural Sciences and Engineering Research Council of Canada,NSERC(Grant No.:IRCPJ 184412-15).
文摘Improved analytical methods for the metabolomic profiling of tissue samples are constantly needed.Currently,conventional sample preparation methods often involve tissue biopsy and/or homogenization,which disrupts the endogenous metabolome.In this study,solid-phase microextraction(SPME)fibers were used to monitor changes in endogenous compounds in homogenized and intact ovine lung tissue.Following SPME,a Biocrates AbsoluteIDQ assay was applied to make a downstream targeted metabolomics analysis and confirm the advantages of in vivo SPME metabolomics.The AbsoluteIDQ kit enabled the targeted analysis of over 100 metabolites via solid-liquid extraction and SPME.Statistical analysis revealed significant differences between conventional liquid extractions from homogenized tissue and SPME results for both homogenized and intact tissue samples.In addition,principal component analysis revealed separated clustering among all the three sample groups,indicating changes in the metabolome due to tissue homogenization and the chosen sample preparation method.Furthermore,clear differences in free metabolites were observed when extractions were performed on the intact and homogenized tissue using identical SPME procedures.Specifically,a direct comparison showed that 47 statistically distinct metabolites were detected between the homogenized and intact lung tissue samples(P<0.05)using mixed-mode SPME fibers.These changes were probably due to the disruptive homogenization of the tissue.This study's findings highlight both the importance of sample preparation in tissue-based metabolomics studies and SPME's unique ability to perform minimally invasive extractions without tissue biopsy or homogenization while providing broad metabolite coverage.
基金supported by the National Key Research and Development Program of China(No.2019YFD0901701)National Natural Science Foundation of China(Nos.12174359and 61975190)Provincial Key Research and Development Program of Shandong,China(No.2019GHZ010)。
文摘The quantitative determination of heavy metals in aquatic products is of great importance for food security issues.Laser-induced breakdown spectroscopy(LIBS)has been used in a variety of foodstuff analysis,but is still limited by its low sensitivity when targeting trace heavy metals.In this work,we compare three sample enrichment methods,namely drying,carbonization,and ashing,for increasing detection sensitivity by LIBS analysis for Pb and Cr in oyster samples.The results demonstrate that carbonization can remove a significant amount of the contributions of organic elements C,H,N and O;meanwhile,the signals of the metallic elements such as Cu,Pb,Sr,Ca,Cr and Mg are enhanced by3–6 times after carbonization,and further enhanced by 5–9 times after ashing.Such enhancement is not only due to the more concentrated metallic elements in the sample compared to the dried ones,but also the unifying of the matter in carbonized and ashed samples from which higher plasma temperature and electron density are observed.This condition favors the detection of trace elements.According to the calibration curves with univariate and multivariate analysis,the ashing method is considered to be the best choice.The limits of detection of the ashing method are 0.52 mg kg-1 for Pb and0.08 mg kg-1 for Cr,which can detect the presence of heavy metals in the oysters exceeding the maximum limits of Pb and Cr required by the Chinese national standard.This method provides a promising application for the heavy metal contamination monitoring in the aquatic product industry.
基金Supported by Nature Fund Projects of Liaoning Province(2015020809)Special Investigation Pro-ject of Grassland Plant Resources in Liaoning Province
文摘Based on years of practice and survey methods of grassland resources at home and abroad, the technical problems that may occur in the survey process are analyzed, the preparatory work before survey, specific content of field survey and sample processing and analysis and specimen preparation are elaborated. Moreover, the announcements of major technical methods are also described in details.
基金supported by the National Key Research and Development Program of the Ministry of Science and Technology,People's Republic of China(contract number 2016YFA0501203)the National Natural Science Foundation of China(21874004,31470727)the Interdisciplinary Medicine Seed Fund of Peking University,and the Fundamental Research Funds for the Central University.
文摘Antimicrobial peptides(AMP)are small proteins that play critical roles in host defense against microbe invasion.Many AMPs disrupt the cellular membrane of microbe,while the mechanism of action of AMPs can be very sophisticated.Solid-state NMR(SSNMR)technique is powerful in characterizing the mechanism of AMPs in vivo and in vitro.This review summarizes the recent advance of SSNMR technique in AMP mechanisms characterization.We highlight the sample preparation approaches,the SSNMR spectroscopic methods,and a number of outstanding examples of AMP mechanisms elucidated via SSNMR spectroscopy.
基金supported by the National Centre for Research and Development under the Lider IX programme(Grant No.:LIDER/44/0164/L-9/17/NCBR/2018)Permission to conduct experiments with controlled substances was issued by the local Pharmaceutical Inspector(Kujawsko-Pomorski Wojewodzki Inspektor Farmaceutyczny w BydgoszczyPermission No.:WIFBY-KK.857.2.4.2016).
文摘For identifying and quantifying prohibited substances,solid-phase microextraction(SPME)continues to arouse interest as a sample preparation method.However,the practical implementation of this method in routine laboratory testing is currently hindered by the limited number of coatings compatible with the ubiquitous high-performance liquid chromatography(HPLC)systems.Only octadecyl(C18)and polydimethylsiloxane/divinylbenzene ligands are currently marketed for this purpose.To address this situation,the present study evaluated 12 HPLC-compatible coatings,including several chemistries not currently used in this application.The stationary phases of SPME devices in the geometry of thin filmcoated blades were prepared by applying silica particles bonded with various functional ligands(C18,octyl,phenyl-hexyl,3-cyanopropyl,benzenesulfonic acid,and selected combinations of these),as well as unbonded silica,to a metal support.Most of these chemistries have not been previously used as microextraction coatings.The 48 most commonly misused substances were selected to assess the extraction efficacy of each coating,and eight desorption solvent compositions were used to optimize the desorption conditions.All samples were analyzed using an HPLC system coupled with triple quadrupole tandem mass spectrometry.This evaluation enables selection of the best-performing coatings for quantifying prohibited substances and investigates the relationship between extraction efficacy and the physicochemical characteristics of the analytes.Ultimately,using the most suitable coatings is essential for trace-level analysis of chemically diverse prohibited substances.
