为了提升实木家具生产效率和车间流水线的平衡性,以NG公司茶椅生产线装配关键制约环节优化为例,通过秒表计时法和MODAPTS动作分析法(MODular arrangement of predetermined time standards,MODAPTS),精确分析生产周期内操作员与设备的...为了提升实木家具生产效率和车间流水线的平衡性,以NG公司茶椅生产线装配关键制约环节优化为例,通过秒表计时法和MODAPTS动作分析法(MODular arrangement of predetermined time standards,MODAPTS),精确分析生产周期内操作员与设备的工作模式,识别耗时最多的关键制约环节。基于“消除-合并-重排-简化”四步法(ECRS原则),从生产管理模式、操作区域布局和工序操作流程3个方面提出了优化方案:1)引入电子看板管理,以实时监控和调整生产进度;2)调整物料存放方式和工作台面,以减少工人弯腰和提升作业效率;3)重新规划行走路径,优化工序操作流程。优化策略的应用显著提高了工艺效率,瓶颈操作时间显著减少了37.5%,处理持续时间从初的229.75 s降至144.86 s;生产线平衡率亦从66.51%提升至85.83%。结果表明,所提出的改进措施有效降低了员工工作强度,优化了生产流程,提高了制造效率,对中小型家具制造企业的生产线优化具有一定的借鉴意义。展开更多
In this paper,we establish an ShIhAhSvIvW model to investigate the impact of media communication on the transmission mechanism of dengue fever.Firstly,the basic reproduction number R0of the model is obtained by using ...In this paper,we establish an ShIhAhSvIvW model to investigate the impact of media communication on the transmission mechanism of dengue fever.Firstly,the basic reproduction number R0of the model is obtained by using the method of the next generation matrix.It shows that disease-free equilibrium is globally asymptotically stable when R0<1;the disease is uniformly persistent when R_(0)>1.Secondly,we select dengue fever case data from Guangdong Province from 2006 to 2019 for numerical simulations and predict its development trend.Finally,we conduct parameter sensitivity analysis,and the results show that increasing media publicity can to some extent reduce the number of patients.展开更多
This paper presents a mode-switching collaborative defense strategy for spacecraft pursuit-evasiondefense scenarios.In these scenarios,the pursuer tries to avoid the defender while capturing the evader,while the evade...This paper presents a mode-switching collaborative defense strategy for spacecraft pursuit-evasiondefense scenarios.In these scenarios,the pursuer tries to avoid the defender while capturing the evader,while the evader and defender form an alliance to prevent the pursuer from achieving its goal.First,the behavioral modes of the pursuer,including attack and avoidance modes,were established using differential game theory.These modes are then recognized by an interactive multiple model-matching algorithm(IMM),that uses several smooth variable structure filters to match the modes of the pursuer and update their probabilities in real time.Based on the linear-quadratic optimization theory,combined with the results of strategy identification,a two-way cooperative optimal strategy for the defender and evader is proposed,where the evader aids the defender to intercept the pursuer by performing luring maneuvers.Simulation results show that the interactive multi-model algorithm based on several smooth variable structure filters perform well in the strategy identification of the pursuer,and the cooperative defense strategy based on strategy identification has good interception performance when facing pursuers,who are able to flexibly adjust their game objectives.展开更多
To identify coatings and analyze the anti-detection capabilities of camouflage patterns, material samples can be prepared using the super-pixel segmentation method. A spectral polarization imaging system is developed,...To identify coatings and analyze the anti-detection capabilities of camouflage patterns, material samples can be prepared using the super-pixel segmentation method. A spectral polarization imaging system is developed, based on the principle of bidirectional reflectance distribution function(BRDF), to obtain spectral reflection intensities of coatings at full spatial angles, and use polarization images to calculate the refractive index by the Fresnel equation. The index is then coupled into TorranceSparrow model to simulate the spectral scattering intensity to mutually verify the experimental results. The spectral scattering characteristics of standard camouflage patterns are then revealed and pinpoint the signature band and the angle of reflecting sensitivity.展开更多
目的研究创伤死亡不同血糖水平患者院前创伤评分(revised traum a score,RTC;glasgow com a scale,GCS)、3 d后死亡构成比、感染率和多器官功能不全综合征(mu ltipe organ dysfunction syndrom e,MODS)发生率的变化。方法随机抽查本院1...目的研究创伤死亡不同血糖水平患者院前创伤评分(revised traum a score,RTC;glasgow com a scale,GCS)、3 d后死亡构成比、感染率和多器官功能不全综合征(mu ltipe organ dysfunction syndrom e,MODS)发生率的变化。方法随机抽查本院1999年1月至2005年1月455份住院创伤死亡病历,根据空腹血糖水平及正常参考范围分为创伤死亡正常血糖组57例和创伤死亡高血糖组298例。统计创伤死亡不同血糖水平组RTC、GCS、3 d后死亡构成比、感染率和MODS发生率及的变化,并计算创伤死亡患者血糖与MODS相关定量指标的相关系数。结果①创伤死亡高血糖组RTC为6.31±1.04,GCS为4.23±0.52;创伤死亡正常血糖组RTC为4.43±0.22,GCS为2.21±0.34。创伤死亡高血糖组院前创伤评分明显高于创伤死亡组正常血糖(P<0.01)。②创伤死亡高血糖组3 d后死亡构成比为67.34%,创伤死亡正常血糖组3 d后死亡构成比为17.54%。创伤死亡高血糖组3 d后死亡构成比明显高于创伤死亡正常血糖组(P<0.01)。③创伤死亡高血糖组感染率为83.92%,MODS发生率为71.86%;创伤死亡正常血糖组感染率为21.05%,MODS发生率为10.53%。创伤死亡高血糖组感染率和MODS发生率均明显高于创伤死亡正常血糖组(P<0.01)。④455例创伤死亡患者血糖水平与血ALT、AST、BUN、CRE、PCO2、CK明显正相关(P值均<0.01)。结论创伤死亡高血糖患者院内存活时间长,感染率和MODS发生率高。创伤死亡正常血糖患者伤情重,存活时间短,感染率和MODS发生率低。创伤高血糖患者死亡因素以感染和MODS为主,创伤正常血糖患者死亡因素以非MODS因素(大出血和颅脑直接损伤等)为主。创伤血糖水平升高可作为创伤MODS预警指标,但血糖正常预后也不一定好。展开更多
文摘为了提升实木家具生产效率和车间流水线的平衡性,以NG公司茶椅生产线装配关键制约环节优化为例,通过秒表计时法和MODAPTS动作分析法(MODular arrangement of predetermined time standards,MODAPTS),精确分析生产周期内操作员与设备的工作模式,识别耗时最多的关键制约环节。基于“消除-合并-重排-简化”四步法(ECRS原则),从生产管理模式、操作区域布局和工序操作流程3个方面提出了优化方案:1)引入电子看板管理,以实时监控和调整生产进度;2)调整物料存放方式和工作台面,以减少工人弯腰和提升作业效率;3)重新规划行走路径,优化工序操作流程。优化策略的应用显著提高了工艺效率,瓶颈操作时间显著减少了37.5%,处理持续时间从初的229.75 s降至144.86 s;生产线平衡率亦从66.51%提升至85.83%。结果表明,所提出的改进措施有效降低了员工工作强度,优化了生产流程,提高了制造效率,对中小型家具制造企业的生产线优化具有一定的借鉴意义。
基金Supported by the Natural Science Basic Research Plan in Shaanxi Province of China(2022JM-023)。
文摘In this paper,we establish an ShIhAhSvIvW model to investigate the impact of media communication on the transmission mechanism of dengue fever.Firstly,the basic reproduction number R0of the model is obtained by using the method of the next generation matrix.It shows that disease-free equilibrium is globally asymptotically stable when R0<1;the disease is uniformly persistent when R_(0)>1.Secondly,we select dengue fever case data from Guangdong Province from 2006 to 2019 for numerical simulations and predict its development trend.Finally,we conduct parameter sensitivity analysis,and the results show that increasing media publicity can to some extent reduce the number of patients.
基金the Science and Technology Department,Heilongjiang Province under Grant Agreement No JJ2022LH0315。
文摘This paper presents a mode-switching collaborative defense strategy for spacecraft pursuit-evasiondefense scenarios.In these scenarios,the pursuer tries to avoid the defender while capturing the evader,while the evader and defender form an alliance to prevent the pursuer from achieving its goal.First,the behavioral modes of the pursuer,including attack and avoidance modes,were established using differential game theory.These modes are then recognized by an interactive multiple model-matching algorithm(IMM),that uses several smooth variable structure filters to match the modes of the pursuer and update their probabilities in real time.Based on the linear-quadratic optimization theory,combined with the results of strategy identification,a two-way cooperative optimal strategy for the defender and evader is proposed,where the evader aids the defender to intercept the pursuer by performing luring maneuvers.Simulation results show that the interactive multi-model algorithm based on several smooth variable structure filters perform well in the strategy identification of the pursuer,and the cooperative defense strategy based on strategy identification has good interception performance when facing pursuers,who are able to flexibly adjust their game objectives.
基金supported by the Jilin Province Science and Technology Development Plan Item (No.20240402068GH)。
文摘To identify coatings and analyze the anti-detection capabilities of camouflage patterns, material samples can be prepared using the super-pixel segmentation method. A spectral polarization imaging system is developed, based on the principle of bidirectional reflectance distribution function(BRDF), to obtain spectral reflection intensities of coatings at full spatial angles, and use polarization images to calculate the refractive index by the Fresnel equation. The index is then coupled into TorranceSparrow model to simulate the spectral scattering intensity to mutually verify the experimental results. The spectral scattering characteristics of standard camouflage patterns are then revealed and pinpoint the signature band and the angle of reflecting sensitivity.
文摘目的研究创伤死亡不同血糖水平患者院前创伤评分(revised traum a score,RTC;glasgow com a scale,GCS)、3 d后死亡构成比、感染率和多器官功能不全综合征(mu ltipe organ dysfunction syndrom e,MODS)发生率的变化。方法随机抽查本院1999年1月至2005年1月455份住院创伤死亡病历,根据空腹血糖水平及正常参考范围分为创伤死亡正常血糖组57例和创伤死亡高血糖组298例。统计创伤死亡不同血糖水平组RTC、GCS、3 d后死亡构成比、感染率和MODS发生率及的变化,并计算创伤死亡患者血糖与MODS相关定量指标的相关系数。结果①创伤死亡高血糖组RTC为6.31±1.04,GCS为4.23±0.52;创伤死亡正常血糖组RTC为4.43±0.22,GCS为2.21±0.34。创伤死亡高血糖组院前创伤评分明显高于创伤死亡组正常血糖(P<0.01)。②创伤死亡高血糖组3 d后死亡构成比为67.34%,创伤死亡正常血糖组3 d后死亡构成比为17.54%。创伤死亡高血糖组3 d后死亡构成比明显高于创伤死亡正常血糖组(P<0.01)。③创伤死亡高血糖组感染率为83.92%,MODS发生率为71.86%;创伤死亡正常血糖组感染率为21.05%,MODS发生率为10.53%。创伤死亡高血糖组感染率和MODS发生率均明显高于创伤死亡正常血糖组(P<0.01)。④455例创伤死亡患者血糖水平与血ALT、AST、BUN、CRE、PCO2、CK明显正相关(P值均<0.01)。结论创伤死亡高血糖患者院内存活时间长,感染率和MODS发生率高。创伤死亡正常血糖患者伤情重,存活时间短,感染率和MODS发生率低。创伤高血糖患者死亡因素以感染和MODS为主,创伤正常血糖患者死亡因素以非MODS因素(大出血和颅脑直接损伤等)为主。创伤血糖水平升高可作为创伤MODS预警指标,但血糖正常预后也不一定好。
