Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercom...Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercomparison Project(GeoMIP) framework,utilizing the Chinese Academy of Sciences Earth System Model version 2(CAS-ESM2.0).This paper briefly describes the basic configuration and experimental design of the CAS-ESM2.0 for G1ext,which involves a sudden reduction in solar irradiance to counterbalance the radiative forcing of an abrupt quadrupling of atmospheric CO_(2) concentration,running for 100 years.Preliminary results show that this model can reproduce well the compensatory effect of a uniform decrease in global solar radiation on the radiative forcing resulting from an abrupt quadrupling of CO_(2) concentration.Like other Earth system models,CAS-ESM2.0 reasonably captures variations in radiative adjustments,surface air temperature,and precipitation patterns,both globally and locally,under the G1ext scenario.The generated datasets have been released on the Earth System Grid Federation data server,providing insight into the potential efficacy and impact of solar geoengineering strategies.展开更多
Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the int...Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the intensity of summer precipitation is often largely underestimated in many current dynamic models.This study uses a deep learning method called Cycle-Consistent Generative Adversarial Networks(CycleGAN)to improve the seasonal forecasts for June-JulyAugust precipitation in southeastern China by the Nanjing University of Information Science and Technology Climate Forecast System(NUIST-CFS 1.0).The results suggest that the CycleGAN-based model significantly improves the accuracy in predicting the spatiotemporal distribution of summer precipitation compared to the traditional quantile mapping(QM)method.Using the unpaired bias-correction model,we can also obtain advanced forecasts of the frequency,intensity,and duration of extreme precipitation events over the dynamic model predictions.This study expands the potential applications of deep learning models toward improving seasonal precipitation forecasts.展开更多
The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the compl...The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the complex precipitation sequences.Here,a detailed investigation has been carried out on the atomic struc-tural evolution of T_(1) precipitate in an aged Al-Cu-Li-Mg-Ag alloy using state-of-the-art Cs-corrected high-angle annular dark field(HAADF)-coupled with integrated differential phase contrast(iDPC)-scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDXS)techniques.An intermediate T_(1)’phase between T_(1p) and T_(1) phase,with a crystal structure and orientation rela-tionship consistent with T_(1),but exhibiting different atomic occupancy and chemical composition was found.We observed the atomic structural transformation from T_(1p) to T_(1)’phase(fcc→hcp),involving only 1/12<112>Al shear component.DFT calculation results validated our proposed structural models and the precipitation sequence.Besides,the distributions of minor solute elements(Ag,Mg,and Zn)in the pre-cipitates exhibited significant differences.These findings may contribute to a further understanding of the nucleation mechanism of T_(1) precipitate.展开更多
In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate p...In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate precipitation of the semi-coherent~Mg_(3)Zn phase.The aging softening of the studied alloy is mainly caused by the rapid transformation of the strengthening~Mg_(3)Zn phase to the softening MgLi(Al,Zn)phase,along with the coarsening of theα-Mg matrix and precipitates withinβ-Li matrix.Further analysis indicates that the quick precipitation and transformation of~Mg_(3)Zn is a consequence of the high diffusion rate of solute atoms,resulting from dense vacancy concentration in theβ-Li matrix.This research bridges a critical gap in the study of aging mechanism in the dual-phase Mg-Li-Al-Zn alloy,providing a theoretical basis for the development and application of high-performance and thermal-stable Mg-Li alloys.展开更多
For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a bala...For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a balance of strength and plasticity.In the present study,the microstructure and high-temperature properties of a novel cast nickel-based superalloy K4800 were investigated after being sub-jected to three heat treatments(HT)procedures,namely HT1:1180℃/4 h+1090℃/2 h+800℃/16 h,HT2:1180℃/4 h+1060℃/2 h+800℃/16 h and HT3:1180℃/4 h+800℃/16 h.It was found that the sub-solvus aging treatments at 1090 and 1060℃ precipitated sub-micron-sized(∼300 nm)primaryγʹphase which enhanced the ductility during 800℃ tensile(the total elongation of T1,T2,and T3 sam-ples were 6.75%,7.3%,and 3.25%,respectively)without evidently impairing the strength.After careful microstructure observation and deformation mechanism analysis,the enhancement of elongation was ra-tionalized that the precipitation of the sub-micron-sized primaryγʹphase decreased the volume-fraction and size of the nanometer-sizedγʹphase which was precipitated at 800℃,and simultaneously,pro-moted the dislocation movement by suppressing the non-planar slip.However,an excessive amount of the sub-micron-sized primaryγʹphase led to a faster ripening process of the nanometer-sizedγʹduring creep,which decreased the creep life at 800℃/430 MPa(T1:125 h,T2:199 h,and T3:198 h).Based on this,we monitored the number density of nanometer-sizedγʹphase coexisting with different amounts of largeγʹduring creep.An area fraction less than 7%of the sub-micron-sizedγʹphase was considered to have little detrimental effect on the creep life of K4800 alloy,which corresponded to a sub-solvus temperature range about 1080-1090℃.展开更多
Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere couplin...Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere coupling and the individual roles of each factor, but the synergistic effect of the two factors remains unclear. This study considers the covariation of evapotranspiration and precipitation to assess evapotranspiration–precipitation(ET–P) coupling across northern China,exploring its spatial variations and their linkage to water and heat factors. Our findings reveal a transition from strongly positive coupling in the northwest to weakly negative coupling in the southeast, peaking in spring. These spatial variations are attributable to water(soil moisture) and heat(air temperature), which explain 39% and 25% of the variability,respectively. The aridity index(AI), a water–heat synergy factor, is the dominant factor, explaining 66% of the spatial variation in ET–P coupling. As the AI increases, ET–P coupling shifts from strongly positive to weakly negative, with an AI around 0.7. This shift is determined by a shift in the evapotranspiration–lifting condensation level(LCL) coupling under an AI change. Regions with an AI below 0.7 experience water-limited evapotranspiration, where increased soil moisture enhances evapotranspiration, reduces sensible heat(H), and lowers the LCL, resulting in a negative ET–LCL coupling.Conversely, regions with an AI above 0.7 experience energy-limited evapotranspiration, where the positive ET–LCL coupling reflects a positive H–LCL coupling or a positive impact of the LCL on evapotranspiration. This analysis advances our understanding of the intricate influences of multifactor surface interactions on the spatial variations of land–atmosphere coupling.展开更多
Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this ...Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this work,the aging-hardening response of AZ80 alloy was effectively enhanced by applying cold-rolling deformation before conducting conventional aging treatment at 200°C.Compared to the directly aged sample,the yield strength of the pre-rolling and aged sample was increased by 35 MPa.Electron microscope examination confirmed that profuse{10¯11}and{10¯11}-{10¯12}twins,consisting of high density of dislocations and stacking faults,were generated by cold rolling.Blocky or ellipsoidal Mg_(17)Al_(12)precipitates formed at the twin boundaries(TBs)during subsequent aging treatment.Crystallographic analysis indicated that the precipitates at{10¯11}TBs always held an identical Potter OR with both the matrix and twin,while the precipitates at{10¯11}-{10¯12}TBs exhibited three different ORs:Burgers OR,Potter OR and P-S OR with either the matrix or the twin.Moreover,recrystallized grains were found inside{10¯11}-{10¯12}double twins after peak-aging at 200°C,implying that precipitation and recrystallization might occur concurrently along TBs at a relatively low temperature.It was speculated that the highly stored energy inside twins and the high elastic energy between the precipitates and twins were driving factors for the occurrence of recrystallization.展开更多
High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabrica...High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabricated via hot extrusion.The effects of La and Ce additions on the microstructure,thermal conductivity,and mechanical properties of the Mg-1.5Mn alloy were investigated.The results indicated that both the as-extruded Mg-1.5Mn-2.5La and Mg-1.5Mn-2.5Ce alloys exhibited a bimodal grain structure,with dynamically precipitated nano-scaleα-Mn phases.In comparison with La,the addition of Ce enhanced the dynamic precipitation more effectively during hot extrusion,while its influence on promoting the dynamic recrystallization was relatively weaker.The high tensile strength obtained in the as-extruded Mg-1.5Mn-2.5RE alloys can be attributed to the combined influence of the bimodal grain structure(with fine dynamic recrystallized(DRXed)grain size and high proportion of un-dynamic recrystallized(unDRXed)grains),dense nano-scale precipitates,and broken Mg12RE phases,while the remarkable thermal conductivity was due to the precipitation of Mn-rich phases from the Mg matrix.展开更多
How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will...How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will be lost.To overcome the strength-ductility trade-off,the strategy of this study is to induce the formation of high-density nanoprecipitates through dual aging(DA),triggering multiple deformation mechanisms,to obtain HEAs with ultrahigh strength and ductility.First,the effect of precold deformation on precipitation behavior was studied using Ni_(35)(CoFe)_(55)V_(5)Nb_(5)(at.%)HEAas the object.The results reveal that the activation energy of recrystallization is 112.2 kJ/mol.As the precold-deformation amount increases from 15%to 65%,the activation energy of precipitation gradually decreases from 178.8 to 159.7 kJ/mol.The precipitation time shortens,the size of the nanoprecipitate decreases,and the density increases.Subsequently,the thermal treatment parameters were optimized,and the DA process was customized based on the effect of precold deformation on precipitation behavior.High-density L1_(2) nanoprecipitates(~3.21×10^(25) m^(-3))were induced in the 65% precold-deformed HEA,which led to the simultaneous formation of twins and stacking fault(SF)networks during deformation.The yield strength(YS),ultimate tensile strength,and ductility of the DA-HEA are~2.0 GPa,~2.2 GPa,and~12.3%,respectively.Compared with the solid solution HEA,the YS of the DA-HEA increased by 1,657 MPa,possessing an astonishing increase of~440%.The high YS stems from the precipitation strengthening contributed by the L1_(2) nanoprecipitates and the dislocation strengthening contributed by precold deformation.The synergistically enhanced ductility stems from the high strain-hardening ability under the dual support of twinning-induced plasticity and SF-induced plasticity.展开更多
This past year, 2024, is on track to be the warmest year, joining 2023 as the two hottest years on record. With the exceptional heat, weather and climate extremes were common across the world. In particular, 2024 has ...This past year, 2024, is on track to be the warmest year, joining 2023 as the two hottest years on record. With the exceptional heat, weather and climate extremes were common across the world. In particular, 2024 has seen a remarkable run of extreme precipitation events and resulting impacts. Here, we provide an overview of the most notable extreme events of the year, including extreme precipitation and floods, tropical cyclones, and droughts. The characteristics and impacts of these extreme events are summarized, followed by discussion on the physical drivers and the role of global warming.Finally, we also discuss the future prospects in extreme event studies, including impact-based perspectives, challenges in attribution of precipitation extremes, and the existing gap to minimize impacts from climate extremes.展开更多
In the context of global warming,it is anticipated that both the intensity and the frequency of future global extreme high precipitation(EHP)and extreme high temperature(EHT)events will increase.To evaluate the future...In the context of global warming,it is anticipated that both the intensity and the frequency of future global extreme high precipitation(EHP)and extreme high temperature(EHT)events will increase.To evaluate the future extreme climate changes in the Asian arid region and Tibetan Plateau,this study applied the NASA Earth Exchange Global Daily Downscaled Projections(NEX-GDDP-CMIP6)to assess the changes in EHP(Rx5d and R95pTOT)and EHT(TX90p and TXx)under different emission scenarios in the 21st century.Findings suggest that both the frequency and the intensity of the extreme indices will increase,exhibiting accelerated growth under higher emission scenarios,particularly under the SSP5-8.5 emission scenario.It is suggested that the growth of EHT and EHP in the early subperiod of the 21st century(2026-2045)will be relatively moderate,with small differences between different emission scenarios.However,by the middle subperiod of the 21st century(2041-2060),the differences between different emission scenarios will become larger than the 2035s and the growth will become more intense.In western central Asia,TX90p,TXx,Rx5d,and R95pTOT increase by 9.7%-14.2%(13.3%-24.7%),1.3℃-1.7℃(1.6℃-2.7℃),6.5%-8.9%(8.2%-8.8%),and 18.1%-27.0%(25.6%-30.0%)by the early(middle)subperiod;in eastern central Asia,TX90p,TXx,Rx5d,and R95pTOT increase 8.1%-12.0%(11.3%-21.1%),1.4℃-1.8℃(1.9℃-2.9℃),7.4%-9.7%(10.4%-13.8%),and 20.2%-29.3%(32.0%-40.8%)by the early(middle)subperiod;and over the Tibetan Plateau,TX90p,TXx,Rx5d,and R95pTOT increase 12.5%-17.4%(17.0%-31.0%),1.2℃-1.5℃(1.6℃-2.5℃),7.2%-10.0%(9.9%-15.0%),and 26.6%-33.1%(36.1%-55.3%)by the early(middle)subperiod.展开更多
Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite cons...Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite considerable research efforts devoted to this area,a systematic summary of these advancements is lacking.This review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,MC,M_(2)C,and M_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)X,and Fe_(2)Mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical performance.Finally,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic steel.This review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.展开更多
Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ord...Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ordering characteristic is destroyed after dislocation shearing.Meanwhile,the local chemical order(LCO)cannot provide an adequate strengthening effect due to its small size.展开更多
A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary ...A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.展开更多
This study investigates trends in extreme precipitation events(EPEs)across Antarctica from 1979 to 2023,analyzing changes in EPE frequency,intensity,and the proportion of extreme to total precipitation.Using Self-Orga...This study investigates trends in extreme precipitation events(EPEs)across Antarctica from 1979 to 2023,analyzing changes in EPE frequency,intensity,and the proportion of extreme to total precipitation.Using Self-Organizing Map(SOM)techniques,the study distinguishes the contributions from thermodynamic,dynamic,and interaction components in explaining these trends.Positive EPE occurrence trends are observed across the Bellingshausen and Weddell Seas,Dronning Maud Land,and parts of the Southern Ocean,with declines limited to Queen Mary Land.Thermodynamic factors,responsible for 96.0%of the overall trend,are driven by increased water vapor content in polar air masses.Dynamic contributions,representing 10.8%,are linked to a strengthened Amundsen Sea Low(ASL)associated with the Southern Annular Mode(SAM)and Pacific South American(PSA)trends.Interaction effects make a slightly negative contribution(-6.8%)to the overall trend.Variations in water vapor transport and vertical velocity tied to annual 500-hPa geopotential height anomalies further explain EPE trends.These findings provide insight into the atmospheric processes that influence Antarctic EPEs,with implications for understanding the climatic impact on the polar environment.展开更多
1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7]...1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7],that indicate their potential for use in actu-ators,sensors,micropumps,energy harvesters,and solid-state re-frigeration[8-10].Among the alloys,Ni-Mn-Sn-based alloys are environment-friendly and cost-effective[6,7,11],and hence,they have received widespread attention.展开更多
The effect of hot deformation onα-phase precipitation during the subsequent heat treatment,as well as the mechanical properties of TB18 Ti-alloy,was investigated.Results show that the round bar obtained by the dual-p...The effect of hot deformation onα-phase precipitation during the subsequent heat treatment,as well as the mechanical properties of TB18 Ti-alloy,was investigated.Results show that the round bar obtained by the dual-phase field forging of the cast ingot exhibits uniform composition distribution on its cross-section.However,various degrees of deformation are detected at different positions on the cross-section,which is attributed to the characteristics of the forging process.Under the forging condition,the microstructure is mainly composed ofβ-phase matrix and coarsened discontinuous primaryα-phases.After solution and following artificial aging treatment,the primaryα-phases disappear,while needle-like secondaryα-phases precipitate in the matrix.Additionally,dispersed white zones are observed in the samples after aging,which are analyzed to be the precipitation-free zones of secondaryα-phase.Despite a uniform compositional distribution among various regions,these dispersed white zones exhibit higher content and larger size in the positions that have undergone lower forging deformation.It indicates that the insufficient forging deformation inhibits the precipitation of the secondaryα-phase,ultimately resulting in the lower strengthening effect by heat treatment.Thus,consistent with the characteristics of the forging process,a periodic variation of sample in strength is detected along the circumferential direction of the forged round bar.展开更多
The effects of different aging processes on the precipitated phase,mechanical properties,molten salt corrosion resistance and post-weld microstructure of 347H stainless steel were studied.The results show that a large...The effects of different aging processes on the precipitated phase,mechanical properties,molten salt corrosion resistance and post-weld microstructure of 347H stainless steel were studied.The results show that a large number of precipitated phases appear in the crystal after aging at 700℃for 400 h.After aging for 3000 h,the number of precipitated phases increases and most of them are gathered at the grain boundaries.There are two forms of precipitates,one is the coarse precipitate rich in Cr,and the other is the smaller precipitates mainly consisting of NbC.After aging at 700℃for 30 min,the yield strength and tensile strength of the samples at room temperature and 593℃increase,but the elongation decreases.The corrosion results in nitrate at 565℃show that the corrosion products of the aged samples are the same as that of the original samples,which are Fe_(2)O_(3),Fe_(3)O_(4),MgCr_(2)O_(4),MgFe_(2)O_(4),FeCr_(2)O_(4) and NaFeO_(2).The proportion of Fe_(3)O_(4) that is dense and well bonded to the subtrate in the original sample is higher than that in the aged sample,so the corrosion resistance is better.At 700℃,the aging time has no obvious effect on the microstructure after welding.展开更多
Cloud type profoundly affects precipitation,but few studies have explored its impact on precipitation scale height.The authors calculated the ratio of the volume of each cloud type to the total cloud volume and partit...Cloud type profoundly affects precipitation,but few studies have explored its impact on precipitation scale height.The authors calculated the ratio of the volume of each cloud type to the total cloud volume and partitioned the tropical region based on the dominant cloud types.Based on this,tropical regions were categorized into altocumulus control regions,stratocumulus control regions,deep convective cloud control regions,and transition regions.These regions exhibit unique characteristics:high precipitation scale heights and low surface precipitation rates in altocumulus control regions;low precipitation scale heights and low surface precipitation rates in stratocumulus control regions;and moderate precipitation scale heights with high surface precipitation rates in deep convective cloud regions.These features arise from differences in cloud characteristics,precipitation probability,and intensity,influenced by varying water vapor structures.In terms of physical mechanisms,altocumulus,stratocumulus,and deep convective cloud regions are characterized by total dryness,upper-level dryness with lower-level wetness,and total wetness,respectively.Upper-layer dryness leads to low cloud and precipitation structures,reducing the precipitation scale height,while lower-layer dryness increases it.Different humidity conditions in the upper and lower layers lead to variations in cloud type and volume distribution,ultimately affecting precipitation scale heights.This finding aids the mechanistic study of cloud precipitation physics in the tropics,providing valuable insights for developing numerical models and parameterizations.展开更多
Due to global warming, extreme weather and climate events are becoming more frequent, highlighting the need to explore the changing characteristics of precipitation in China, including extreme precipitation. A cluster...Due to global warming, extreme weather and climate events are becoming more frequent, highlighting the need to explore the changing characteristics of precipitation in China, including extreme precipitation. A clustering algorithm was developed to classify summer(June, July, and August) daily precipitation in China from 1961 to 2020, considering spatial distribution, standard deviations, and frequency of extreme precipitation events. The results reveal six distinct precipitation climate zones, a classification that differs from previous divisions. While overall precipitation has decreased in most regions, the frequency of extreme precipitation events has increased across all clusters, indicating a shift in precipitation distribution patterns. Analysis shows that the weakened Lake Baikal blocking high and strengthened Mongolian cyclone influence the arid region in northwest China(Cluster 1), which is characterized by the lowest precipitation.The transition zone between the monsoon and arid region(Cluster 2) is affected by the Mongolian cyclone, water vapor transport from the Indian Ocean, and shifts in the monsoon boundary. Clusters 3 and 4 represent areas associated with advancement and retreat of the summer monsoon. In the Meiyu region, two distinct subregions have been identified exist.Cluster 4 is primarily influenced by the East Asia-Pacific wave train. Despite sharing similar climate drivers and proximity,Clusters 4 and 5 differ significantly due to topographic variations and disparate levels of urbanization. Cluster 5 exhibits a higher average precipitation, greater variability, and more frequent extreme events. Cluster 6 exhibits the highest overall precipitation in the coastal areas of Guangdong and Guangxi, where abundant water vapor contributes to a higher frequency of extreme precipitation. In addition, anthropogenic activities and urbanization significantly influence precipitation in Beijing-Tianjin-Hebei and Yangtze River Delta regions. This research proposes a precipitation classification scheme integrating multiple precipitation parameters, providing support for risk management and mitigation strategies in the face of increasing extreme precipitation events.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.41875126)the National Key Scientific and Technological Infrastructure project “Earth System Numerical Simulation Facility”(EarthLab)。
文摘Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercomparison Project(GeoMIP) framework,utilizing the Chinese Academy of Sciences Earth System Model version 2(CAS-ESM2.0).This paper briefly describes the basic configuration and experimental design of the CAS-ESM2.0 for G1ext,which involves a sudden reduction in solar irradiance to counterbalance the radiative forcing of an abrupt quadrupling of atmospheric CO_(2) concentration,running for 100 years.Preliminary results show that this model can reproduce well the compensatory effect of a uniform decrease in global solar radiation on the radiative forcing resulting from an abrupt quadrupling of CO_(2) concentration.Like other Earth system models,CAS-ESM2.0 reasonably captures variations in radiative adjustments,surface air temperature,and precipitation patterns,both globally and locally,under the G1ext scenario.The generated datasets have been released on the Earth System Grid Federation data server,providing insight into the potential efficacy and impact of solar geoengineering strategies.
基金supported by the National Key Research and Development Program of China(Grant No.2020YFA0608000)the National Natural Science Foundation of China(Grant No.42030605)+1 种基金CAAI-MindSpore Academic Fund Research Projects(CAAIXSJLJJ2023MindSpore11)the program of China Scholarships Council(No.CXXM2101180001)。
文摘Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the intensity of summer precipitation is often largely underestimated in many current dynamic models.This study uses a deep learning method called Cycle-Consistent Generative Adversarial Networks(CycleGAN)to improve the seasonal forecasts for June-JulyAugust precipitation in southeastern China by the Nanjing University of Information Science and Technology Climate Forecast System(NUIST-CFS 1.0).The results suggest that the CycleGAN-based model significantly improves the accuracy in predicting the spatiotemporal distribution of summer precipitation compared to the traditional quantile mapping(QM)method.Using the unpaired bias-correction model,we can also obtain advanced forecasts of the frequency,intensity,and duration of extreme precipitation events over the dynamic model predictions.This study expands the potential applications of deep learning models toward improving seasonal precipitation forecasts.
基金supported by the Pre-research fund(No.412130024).
文摘The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the complex precipitation sequences.Here,a detailed investigation has been carried out on the atomic struc-tural evolution of T_(1) precipitate in an aged Al-Cu-Li-Mg-Ag alloy using state-of-the-art Cs-corrected high-angle annular dark field(HAADF)-coupled with integrated differential phase contrast(iDPC)-scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDXS)techniques.An intermediate T_(1)’phase between T_(1p) and T_(1) phase,with a crystal structure and orientation rela-tionship consistent with T_(1),but exhibiting different atomic occupancy and chemical composition was found.We observed the atomic structural transformation from T_(1p) to T_(1)’phase(fcc→hcp),involving only 1/12<112>Al shear component.DFT calculation results validated our proposed structural models and the precipitation sequence.Besides,the distributions of minor solute elements(Ag,Mg,and Zn)in the pre-cipitates exhibited significant differences.These findings may contribute to a further understanding of the nucleation mechanism of T_(1) precipitate.
基金supported by the Foundation Strengthening Plan Technical Field Fund(No.2021-JJ-0112)Major Scientific and Technological Innovation Project of Luoyang(No.2201029A)+1 种基金National Science and Technology Innovation Special Zone(No.02-14-01)National Natural Science Foundation of China(No.U2037601).
文摘In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate precipitation of the semi-coherent~Mg_(3)Zn phase.The aging softening of the studied alloy is mainly caused by the rapid transformation of the strengthening~Mg_(3)Zn phase to the softening MgLi(Al,Zn)phase,along with the coarsening of theα-Mg matrix and precipitates withinβ-Li matrix.Further analysis indicates that the quick precipitation and transformation of~Mg_(3)Zn is a consequence of the high diffusion rate of solute atoms,resulting from dense vacancy concentration in theβ-Li matrix.This research bridges a critical gap in the study of aging mechanism in the dual-phase Mg-Li-Al-Zn alloy,providing a theoretical basis for the development and application of high-performance and thermal-stable Mg-Li alloys.
文摘For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a balance of strength and plasticity.In the present study,the microstructure and high-temperature properties of a novel cast nickel-based superalloy K4800 were investigated after being sub-jected to three heat treatments(HT)procedures,namely HT1:1180℃/4 h+1090℃/2 h+800℃/16 h,HT2:1180℃/4 h+1060℃/2 h+800℃/16 h and HT3:1180℃/4 h+800℃/16 h.It was found that the sub-solvus aging treatments at 1090 and 1060℃ precipitated sub-micron-sized(∼300 nm)primaryγʹphase which enhanced the ductility during 800℃ tensile(the total elongation of T1,T2,and T3 sam-ples were 6.75%,7.3%,and 3.25%,respectively)without evidently impairing the strength.After careful microstructure observation and deformation mechanism analysis,the enhancement of elongation was ra-tionalized that the precipitation of the sub-micron-sized primaryγʹphase decreased the volume-fraction and size of the nanometer-sizedγʹphase which was precipitated at 800℃,and simultaneously,pro-moted the dislocation movement by suppressing the non-planar slip.However,an excessive amount of the sub-micron-sized primaryγʹphase led to a faster ripening process of the nanometer-sizedγʹduring creep,which decreased the creep life at 800℃/430 MPa(T1:125 h,T2:199 h,and T3:198 h).Based on this,we monitored the number density of nanometer-sizedγʹphase coexisting with different amounts of largeγʹduring creep.An area fraction less than 7%of the sub-micron-sizedγʹphase was considered to have little detrimental effect on the creep life of K4800 alloy,which corresponded to a sub-solvus temperature range about 1080-1090℃.
基金jointly supported by the National Science Foundation of China (Grant No.42230611)the Meteorological Joint Fund (Grant No.U2142208)+2 种基金the Second Tibetan Plateau Scientific Expedition and Research (STEP) program (grant no.2019QZKK0102)the National Science Foundation of China (Grant No.42005071)the Gansu Province Key Talent Project (Grant No.2023RCXM37)。
文摘Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere coupling and the individual roles of each factor, but the synergistic effect of the two factors remains unclear. This study considers the covariation of evapotranspiration and precipitation to assess evapotranspiration–precipitation(ET–P) coupling across northern China,exploring its spatial variations and their linkage to water and heat factors. Our findings reveal a transition from strongly positive coupling in the northwest to weakly negative coupling in the southeast, peaking in spring. These spatial variations are attributable to water(soil moisture) and heat(air temperature), which explain 39% and 25% of the variability,respectively. The aridity index(AI), a water–heat synergy factor, is the dominant factor, explaining 66% of the spatial variation in ET–P coupling. As the AI increases, ET–P coupling shifts from strongly positive to weakly negative, with an AI around 0.7. This shift is determined by a shift in the evapotranspiration–lifting condensation level(LCL) coupling under an AI change. Regions with an AI below 0.7 experience water-limited evapotranspiration, where increased soil moisture enhances evapotranspiration, reduces sensible heat(H), and lowers the LCL, resulting in a negative ET–LCL coupling.Conversely, regions with an AI above 0.7 experience energy-limited evapotranspiration, where the positive ET–LCL coupling reflects a positive H–LCL coupling or a positive impact of the LCL on evapotranspiration. This analysis advances our understanding of the intricate influences of multifactor surface interactions on the spatial variations of land–atmosphere coupling.
基金financially supported by the National Natural Science Foundation of China(No.52071040 and 51871036)Natural Science Foundation of Shandong Province,China(No.ZR2022QE008)China Postdoctoral Science Foundation(No.2022M712984)。
文摘Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this work,the aging-hardening response of AZ80 alloy was effectively enhanced by applying cold-rolling deformation before conducting conventional aging treatment at 200°C.Compared to the directly aged sample,the yield strength of the pre-rolling and aged sample was increased by 35 MPa.Electron microscope examination confirmed that profuse{10¯11}and{10¯11}-{10¯12}twins,consisting of high density of dislocations and stacking faults,were generated by cold rolling.Blocky or ellipsoidal Mg_(17)Al_(12)precipitates formed at the twin boundaries(TBs)during subsequent aging treatment.Crystallographic analysis indicated that the precipitates at{10¯11}TBs always held an identical Potter OR with both the matrix and twin,while the precipitates at{10¯11}-{10¯12}TBs exhibited three different ORs:Burgers OR,Potter OR and P-S OR with either the matrix or the twin.Moreover,recrystallized grains were found inside{10¯11}-{10¯12}double twins after peak-aging at 200°C,implying that precipitation and recrystallization might occur concurrently along TBs at a relatively low temperature.It was speculated that the highly stored energy inside twins and the high elastic energy between the precipitates and twins were driving factors for the occurrence of recrystallization.
基金supported by National Key Research&Development Program of China(Grant Nos.2021YFB3703300,2021YFE010016 and 2020YFA0405900)National Natural Science Foundation(Grant Nos.52220105003 and 51971075)+2 种基金the Fundamental Research Funds for the Central Universities(Grant No.FRFCU5710000918)Natural Science Foundation of Heilongjiang Province-Outstanding Youth Fund(Grant No.YQ2020E006)JSPS KAKENHI(Grant No.JP21H01669).
文摘High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabricated via hot extrusion.The effects of La and Ce additions on the microstructure,thermal conductivity,and mechanical properties of the Mg-1.5Mn alloy were investigated.The results indicated that both the as-extruded Mg-1.5Mn-2.5La and Mg-1.5Mn-2.5Ce alloys exhibited a bimodal grain structure,with dynamically precipitated nano-scaleα-Mn phases.In comparison with La,the addition of Ce enhanced the dynamic precipitation more effectively during hot extrusion,while its influence on promoting the dynamic recrystallization was relatively weaker.The high tensile strength obtained in the as-extruded Mg-1.5Mn-2.5RE alloys can be attributed to the combined influence of the bimodal grain structure(with fine dynamic recrystallized(DRXed)grain size and high proportion of un-dynamic recrystallized(unDRXed)grains),dense nano-scale precipitates,and broken Mg12RE phases,while the remarkable thermal conductivity was due to the precipitation of Mn-rich phases from the Mg matrix.
基金supported by the National Key Research and Development Project(No.2023YFA1600082)the National Natural Science Foundation of China(Nos.U2141207,52001083,52171111)+3 种基金Natural Science Foundation of Heilongjiang(No.YQ2023E026)the Fundamental Research Funds for the Central Universities(No.3072022JIP1002)Key Laboratory Found of the Ministry of Industry and Information Technology(No.GXB202201)Youth Talent Project of China National Nuclear Corporation(No.CNNC2021YTEP-HEU01).
文摘How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will be lost.To overcome the strength-ductility trade-off,the strategy of this study is to induce the formation of high-density nanoprecipitates through dual aging(DA),triggering multiple deformation mechanisms,to obtain HEAs with ultrahigh strength and ductility.First,the effect of precold deformation on precipitation behavior was studied using Ni_(35)(CoFe)_(55)V_(5)Nb_(5)(at.%)HEAas the object.The results reveal that the activation energy of recrystallization is 112.2 kJ/mol.As the precold-deformation amount increases from 15%to 65%,the activation energy of precipitation gradually decreases from 178.8 to 159.7 kJ/mol.The precipitation time shortens,the size of the nanoprecipitate decreases,and the density increases.Subsequently,the thermal treatment parameters were optimized,and the DA process was customized based on the effect of precold deformation on precipitation behavior.High-density L1_(2) nanoprecipitates(~3.21×10^(25) m^(-3))were induced in the 65% precold-deformed HEA,which led to the simultaneous formation of twins and stacking fault(SF)networks during deformation.The yield strength(YS),ultimate tensile strength,and ductility of the DA-HEA are~2.0 GPa,~2.2 GPa,and~12.3%,respectively.Compared with the solid solution HEA,the YS of the DA-HEA increased by 1,657 MPa,possessing an astonishing increase of~440%.The high YS stems from the precipitation strengthening contributed by the L1_(2) nanoprecipitates and the dislocation strengthening contributed by precold deformation.The synergistically enhanced ductility stems from the high strain-hardening ability under the dual support of twinning-induced plasticity and SF-induced plasticity.
基金jointly supported by the National Natural Science Foundation of China (Grant Nos.42422502 and 42275038)the China Meteorological Administration Climate Change Special Program (Grant No.QBZ202306)funded by the Met Office Climate Science for Service Partnership (CSSP) China project under the International Science Partnerships Fund (ISPF)。
文摘This past year, 2024, is on track to be the warmest year, joining 2023 as the two hottest years on record. With the exceptional heat, weather and climate extremes were common across the world. In particular, 2024 has seen a remarkable run of extreme precipitation events and resulting impacts. Here, we provide an overview of the most notable extreme events of the year, including extreme precipitation and floods, tropical cyclones, and droughts. The characteristics and impacts of these extreme events are summarized, followed by discussion on the physical drivers and the role of global warming.Finally, we also discuss the future prospects in extreme event studies, including impact-based perspectives, challenges in attribution of precipitation extremes, and the existing gap to minimize impacts from climate extremes.
基金supported by the Second Tibetan Plateau Scientific Expedition and Research Program[grant number 2019QZKK0101]。
文摘In the context of global warming,it is anticipated that both the intensity and the frequency of future global extreme high precipitation(EHP)and extreme high temperature(EHT)events will increase.To evaluate the future extreme climate changes in the Asian arid region and Tibetan Plateau,this study applied the NASA Earth Exchange Global Daily Downscaled Projections(NEX-GDDP-CMIP6)to assess the changes in EHP(Rx5d and R95pTOT)and EHT(TX90p and TXx)under different emission scenarios in the 21st century.Findings suggest that both the frequency and the intensity of the extreme indices will increase,exhibiting accelerated growth under higher emission scenarios,particularly under the SSP5-8.5 emission scenario.It is suggested that the growth of EHT and EHP in the early subperiod of the 21st century(2026-2045)will be relatively moderate,with small differences between different emission scenarios.However,by the middle subperiod of the 21st century(2041-2060),the differences between different emission scenarios will become larger than the 2035s and the growth will become more intense.In western central Asia,TX90p,TXx,Rx5d,and R95pTOT increase by 9.7%-14.2%(13.3%-24.7%),1.3℃-1.7℃(1.6℃-2.7℃),6.5%-8.9%(8.2%-8.8%),and 18.1%-27.0%(25.6%-30.0%)by the early(middle)subperiod;in eastern central Asia,TX90p,TXx,Rx5d,and R95pTOT increase 8.1%-12.0%(11.3%-21.1%),1.4℃-1.8℃(1.9℃-2.9℃),7.4%-9.7%(10.4%-13.8%),and 20.2%-29.3%(32.0%-40.8%)by the early(middle)subperiod;and over the Tibetan Plateau,TX90p,TXx,Rx5d,and R95pTOT increase 12.5%-17.4%(17.0%-31.0%),1.2℃-1.5℃(1.6℃-2.5℃),7.2%-10.0%(9.9%-15.0%),and 26.6%-33.1%(36.1%-55.3%)by the early(middle)subperiod.
基金supported by the National Natural Science Foundation of China(Nos.52122408 and 52071023)financial support from the Fundamental Research Funds for the Central Universities(University of Science and Technology Beijing,No.FRF-TP-2021-04C1,and 06500135)。
文摘Martensite is an important microstructure in ultrahigh-strength steels,and enhancing the strength of martensitic steels often involves the introduction of precipitated phases within the martensitic matrix.Despite considerable research efforts devoted to this area,a systematic summary of these advancements is lacking.This review focuses on the precipitates prevalent in ultrahigh-strength martensitic steel,primarily carbides(e.g.,MC,M_(2)C,and M_(3)C)and intermetallic compounds(e.g.,Ni Al,Ni_(3)X,and Fe_(2)Mo).The precipitation-strengthening effect of these precipitates on ultrahigh-strength martensitic steel is discussed from the aspects of heat treatment processes,microstructure of precipitate-strengthened martensite matrix,and mechanical performance.Finally,a perspective on the development of precipitation-strengthened martensitic steel is presented to contribute to the advancement of ultrahigh-strength martensitic steel.This review highlights significant findings,ongoing challenges,and opportunities in the development of ultrahigh-strength martensitic steel.
基金supported by the National Natural Science Foundation of China(Nos.52171166 and U20A20231)the Natural Science Foundation of Hunan Province,China(Nos.2024JJ2060 and 2024JJ5406)+1 种基金the Key Laboratory of Materials in Dynamic Extremes of Sichuan Province(No.2023SCKT1102)the Postgraduate Scientific Research Innovation Project of National University of Defense Technology(No.XJJC2024065).
文摘Introducing B2 ordering can effectively improve the mechanical properties of lightweight refractory high-entropy alloys(LRHEAs).However,(Zr,Al)-enriched B2 precipitates generally reduce the ductility because their ordering characteristic is destroyed after dislocation shearing.Meanwhile,the local chemical order(LCO)cannot provide an adequate strengthening effect due to its small size.
基金supported by the National Key R&D Program of China(No.2021YFB3400900)the National Natural Science Foundation of China(Nos.52175373,52205435)+1 种基金Natural Science Foundation of Hunan Province,China(No.2022JJ40621)the Innovation Fund of National Commercial Aircraft Manufacturing Engineering Technology Center,China(No.COMACSFGS-2022-1875)。
文摘A new unified constitutive model was developed to predict the two-stage creep-aging(TSCA)behavior of Al-Zn-Mg-Cu alloys.The particular bimodal precipitation feature was analyzed and modeled by considering the primary micro-variables evolution at different temperatures and their interaction.The dislocation density was incorporated into the model to capture the effect of creep deformation on precipitation.Quantitative transmission electron microscopy and experimental data obtained from a previous study were used to calibrate the model.Subsequently,the developed constitutive model was implemented in the finite element(FE)software ABAQUS via the user subroutines for TSCA process simulation and the springback prediction of an integral panel.A TSCA test was performed.The result shows that the maximum radius deviation between the formed plate and the simulation results is less than 0.4 mm,thus validating the effectiveness of the developed constitutive model and FE model.
基金supported by the National Key R&D Program of China(2022YFE0106300)Norges Forskningsråd(328886).
文摘This study investigates trends in extreme precipitation events(EPEs)across Antarctica from 1979 to 2023,analyzing changes in EPE frequency,intensity,and the proportion of extreme to total precipitation.Using Self-Organizing Map(SOM)techniques,the study distinguishes the contributions from thermodynamic,dynamic,and interaction components in explaining these trends.Positive EPE occurrence trends are observed across the Bellingshausen and Weddell Seas,Dronning Maud Land,and parts of the Southern Ocean,with declines limited to Queen Mary Land.Thermodynamic factors,responsible for 96.0%of the overall trend,are driven by increased water vapor content in polar air masses.Dynamic contributions,representing 10.8%,are linked to a strengthened Amundsen Sea Low(ASL)associated with the Southern Annular Mode(SAM)and Pacific South American(PSA)trends.Interaction effects make a slightly negative contribution(-6.8%)to the overall trend.Variations in water vapor transport and vertical velocity tied to annual 500-hPa geopotential height anomalies further explain EPE trends.These findings provide insight into the atmospheric processes that influence Antarctic EPEs,with implications for understanding the climatic impact on the polar environment.
基金supported by the National Key R&D Pro-gram of China(No.2022YFB3805701)National Natural Science Foundation of China(NSFC)(No.52371182,51701052,52192592,52192593)+1 种基金Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001)the Heilongjiang Touyan Innovation Team Program.
文摘1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7],that indicate their potential for use in actu-ators,sensors,micropumps,energy harvesters,and solid-state re-frigeration[8-10].Among the alloys,Ni-Mn-Sn-based alloys are environment-friendly and cost-effective[6,7,11],and hence,they have received widespread attention.
基金Qin Chuangyuan Cites High-Level Innovation,Entrepreneurship Talent Project(QCYRCXM-2023-003)Innovation Capability Support Program of Shaanxi(2022KJXX-84)。
文摘The effect of hot deformation onα-phase precipitation during the subsequent heat treatment,as well as the mechanical properties of TB18 Ti-alloy,was investigated.Results show that the round bar obtained by the dual-phase field forging of the cast ingot exhibits uniform composition distribution on its cross-section.However,various degrees of deformation are detected at different positions on the cross-section,which is attributed to the characteristics of the forging process.Under the forging condition,the microstructure is mainly composed ofβ-phase matrix and coarsened discontinuous primaryα-phases.After solution and following artificial aging treatment,the primaryα-phases disappear,while needle-like secondaryα-phases precipitate in the matrix.Additionally,dispersed white zones are observed in the samples after aging,which are analyzed to be the precipitation-free zones of secondaryα-phase.Despite a uniform compositional distribution among various regions,these dispersed white zones exhibit higher content and larger size in the positions that have undergone lower forging deformation.It indicates that the insufficient forging deformation inhibits the precipitation of the secondaryα-phase,ultimately resulting in the lower strengthening effect by heat treatment.Thus,consistent with the characteristics of the forging process,a periodic variation of sample in strength is detected along the circumferential direction of the forged round bar.
基金Science and Technology Program Project of Gansu Province(21ZD3GB001)。
文摘The effects of different aging processes on the precipitated phase,mechanical properties,molten salt corrosion resistance and post-weld microstructure of 347H stainless steel were studied.The results show that a large number of precipitated phases appear in the crystal after aging at 700℃for 400 h.After aging for 3000 h,the number of precipitated phases increases and most of them are gathered at the grain boundaries.There are two forms of precipitates,one is the coarse precipitate rich in Cr,and the other is the smaller precipitates mainly consisting of NbC.After aging at 700℃for 30 min,the yield strength and tensile strength of the samples at room temperature and 593℃increase,but the elongation decreases.The corrosion results in nitrate at 565℃show that the corrosion products of the aged samples are the same as that of the original samples,which are Fe_(2)O_(3),Fe_(3)O_(4),MgCr_(2)O_(4),MgFe_(2)O_(4),FeCr_(2)O_(4) and NaFeO_(2).The proportion of Fe_(3)O_(4) that is dense and well bonded to the subtrate in the original sample is higher than that in the aged sample,so the corrosion resistance is better.At 700℃,the aging time has no obvious effect on the microstructure after welding.
基金supported by the National Natural Science Foundation of China[grant numbers 42175099 and 42027804]The appointment of Chunsong Lu at Nanjing University of Information Science&Technology was partially supported by the Jiangsu Specially-Appointed Professor[grant number R2024T01].
文摘Cloud type profoundly affects precipitation,but few studies have explored its impact on precipitation scale height.The authors calculated the ratio of the volume of each cloud type to the total cloud volume and partitioned the tropical region based on the dominant cloud types.Based on this,tropical regions were categorized into altocumulus control regions,stratocumulus control regions,deep convective cloud control regions,and transition regions.These regions exhibit unique characteristics:high precipitation scale heights and low surface precipitation rates in altocumulus control regions;low precipitation scale heights and low surface precipitation rates in stratocumulus control regions;and moderate precipitation scale heights with high surface precipitation rates in deep convective cloud regions.These features arise from differences in cloud characteristics,precipitation probability,and intensity,influenced by varying water vapor structures.In terms of physical mechanisms,altocumulus,stratocumulus,and deep convective cloud regions are characterized by total dryness,upper-level dryness with lower-level wetness,and total wetness,respectively.Upper-layer dryness leads to low cloud and precipitation structures,reducing the precipitation scale height,while lower-layer dryness increases it.Different humidity conditions in the upper and lower layers lead to variations in cloud type and volume distribution,ultimately affecting precipitation scale heights.This finding aids the mechanistic study of cloud precipitation physics in the tropics,providing valuable insights for developing numerical models and parameterizations.
基金National Natural Science Foundation of China(U2442202, 42274217, 62441501)Key Innovation Team of China Meteorological Administration (CMA2024ZD01)Scientific Research Foundation of CUIT (376278, KYTZ202158)。
文摘Due to global warming, extreme weather and climate events are becoming more frequent, highlighting the need to explore the changing characteristics of precipitation in China, including extreme precipitation. A clustering algorithm was developed to classify summer(June, July, and August) daily precipitation in China from 1961 to 2020, considering spatial distribution, standard deviations, and frequency of extreme precipitation events. The results reveal six distinct precipitation climate zones, a classification that differs from previous divisions. While overall precipitation has decreased in most regions, the frequency of extreme precipitation events has increased across all clusters, indicating a shift in precipitation distribution patterns. Analysis shows that the weakened Lake Baikal blocking high and strengthened Mongolian cyclone influence the arid region in northwest China(Cluster 1), which is characterized by the lowest precipitation.The transition zone between the monsoon and arid region(Cluster 2) is affected by the Mongolian cyclone, water vapor transport from the Indian Ocean, and shifts in the monsoon boundary. Clusters 3 and 4 represent areas associated with advancement and retreat of the summer monsoon. In the Meiyu region, two distinct subregions have been identified exist.Cluster 4 is primarily influenced by the East Asia-Pacific wave train. Despite sharing similar climate drivers and proximity,Clusters 4 and 5 differ significantly due to topographic variations and disparate levels of urbanization. Cluster 5 exhibits a higher average precipitation, greater variability, and more frequent extreme events. Cluster 6 exhibits the highest overall precipitation in the coastal areas of Guangdong and Guangxi, where abundant water vapor contributes to a higher frequency of extreme precipitation. In addition, anthropogenic activities and urbanization significantly influence precipitation in Beijing-Tianjin-Hebei and Yangtze River Delta regions. This research proposes a precipitation classification scheme integrating multiple precipitation parameters, providing support for risk management and mitigation strategies in the face of increasing extreme precipitation events.
