Northeast China(NEC),a critical agricultural and ecological zone,has experienced intensified hydrological variability under global warming,with cascading impacts on food security and ecosystem resilience.This study ut...Northeast China(NEC),a critical agricultural and ecological zone,has experienced intensified hydrological variability under global warming,with cascading impacts on food security and ecosystem resilience.This study utilized observational data and two new generation reanalysis products(i.e.,the fifth major global reanalysis produced by ECMWF(ERA5)and the Japanese Reanalysis for Three Quarters of a Century(JRA-3Q))to investigate the shift changes in precipitation in NEC around 2000 and associated water vapor transport.The analysis identified a pivotal interdecadal shift in 1998/99,transitioning from moderate increases(17.5 mm/10 yr during 1980-1998)to accelerated but more variable precipitation growth(85.4 mm/10 yr post-1999).While the mean precipitation during the post-shift period decreased,enhanced anticyclonic circulation amplified moisture divergence over continental NEC,redirecting vapor flux toward coastal regions.Crucially,trajectory analysis demonstrated regime-dependent moisture sourcing:midlatitude westerlies dominated during wet extremes(44% of trajectories in 1998),whereas East Asian monsoon flows prevailed in drought years(36% of trajectories in 2007).The post-1998 period exhibited increased reliance on localized recycling(45%of mid-tropospheric trajectories),reflecting weakened monsoonal inflow.These findings highlight NEC’s growing vulnerability to competing moisture pathways and atmospheric blocking-a dual mechanism that explains rising extremes despite declining mean precipitation.By reconciling dataset discrepancies(ERA5 vs.JRA-3Q trends)and elucidating circulation-precipitation linkages,this work provides actionable insights for climate-resilient agriculture in NEC’s water-stressed ecosystems.展开更多
This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shea...This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.展开更多
Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the...Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the period of 1979-2022.The results show that the TPA-DM,the dominant pattern of interannual variability in the tropical Pacific and Atlantic regions,exhibits a significant negative correlation with NCSP.The positive phase of TPA-DM induces subsidence over the Maritime Continent through a zonal circulation pattern,which initiates a Pacific-Japan-like wave train along the East Asian coast.The circulation anomalies lead to moisture deficits and convergence subsidence over North China,leading to below-normal rainfall.Further analysis reveals that cooler SST in the Southern Tropical Atlantic facilitates the persistence of the TPA-DM by stimulating the anomalous Walker circulation associated with wind-evaporation-SST-convection feedback.展开更多
Based on reanalysis data from 1979 to 2021,this study explores the spatial distribution of the Southern Indian Ocean Dipole(SIOD)and its individual and synergistic effects with the El Niño-Southern Oscillation(EN...Based on reanalysis data from 1979 to 2021,this study explores the spatial distribution of the Southern Indian Ocean Dipole(SIOD)and its individual and synergistic effects with the El Niño-Southern Oscillation(ENSO)on summer precipitation in China.The inverse phase spatial distribution of sea surface temperature anomalies(SSTAs)in the southwest and northeast of the southern Indian Ocean is defined as the SIOD.Positive SIOD events(positive SSTAs in the southwest,negative SSTAs in the northeast)are associated with La Niña events(Central Pacific(CP)type),while negative SIOD events(negative SSTAs in the southwest,positive SSTAs in the northeast)are associated with El Niño events(Eastern Pacific(EP)type).Both SIOD and ENSO have certain impacts on summer precipitation in China.Precipitation in the Yangtze River basin decreases,while precipitation in southern China increases during pure positive SIOD(P_PSIOD)events.During pure negative SIOD(P_NSIOD)events,the changes in precipitation are exactly the opposite of those during P_PSIOD events,which may be due to differences in the cross-equatorial flow in the southern Indian Ocean,particularly in low-level Australian cross-equatorial flow.When positive SIOD and CP-type La Niña events occur simultaneously(PSIOD+La_Niña),precipitation increases in the Yangtze-Huaihe River basin,while it decreases in northern China.When negative SIOD and EP-type El Niño events occur simultaneously(NSIOD+El_Niño),precipitation in the Yangtze-Huaihe River basin is significantly lower than during P_NSIOD events.This is caused by differences in water vapor originating from the Pacific Ocean during different events.展开更多
Global land monsoon precipitation(GLMP)is highly sensitive to changes in interhemispheric thermal contrast(ITC).Amplified interhemispheric asymmetries of GLMP due to enhanced ITC driven by high-level anthropogenic emi...Global land monsoon precipitation(GLMP)is highly sensitive to changes in interhemispheric thermal contrast(ITC).Amplified interhemispheric asymmetries of GLMP due to enhanced ITC driven by high-level anthropogenic emissions are expected to simultaneously increase the probability of regional floods and droughts,threatening ecosystems within global terrestrial monsoon regions and the freshwater supply for billions of residents in these areas.In this study,the responses of GLMP to the evolution of ITC toward the carbon neutrality goal are assessed using multimodel outputs from a new model intercomparison project(CovidMIP).The results show that the Northern Hemisphere-Southern Hemisphere(NH-SH)asymmetry of GLMP in boreal summer weakens during the 2040s,as a persistent reduction in well-mixed greenhouse gas(WMGHG)emissions leads to a downward trend in the ITC after 2040.At the same time,the reduction in WMGHG emissions dampens the Eastern Hemisphere-Western Hemisphere(EH-WH)asymmetry of GLMP by inducing La Niña-like cooling and enhancing moisture transport to Inner America.The resulting increases in land monsoon precipitation(LMP)may alleviate drought under the global warming scenario by about 19%-25%and 7%-9%in the WH and SH monsoon regions,respectively.However,a persistent reduction in aerosol emissions in Asia will dominate the increases in LMP in this region until the mid-21st century,and these increases may be approximately 23%-60%of the growth under the global warming scenario.Our results highlight the different rates of response of aerosol and WMGHG concentrations to the carbon neutrality goal,leading to various changes in LMP at global and regional scales.展开更多
Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercom...Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercomparison Project(GeoMIP) framework,utilizing the Chinese Academy of Sciences Earth System Model version 2(CAS-ESM2.0).This paper briefly describes the basic configuration and experimental design of the CAS-ESM2.0 for G1ext,which involves a sudden reduction in solar irradiance to counterbalance the radiative forcing of an abrupt quadrupling of atmospheric CO_(2) concentration,running for 100 years.Preliminary results show that this model can reproduce well the compensatory effect of a uniform decrease in global solar radiation on the radiative forcing resulting from an abrupt quadrupling of CO_(2) concentration.Like other Earth system models,CAS-ESM2.0 reasonably captures variations in radiative adjustments,surface air temperature,and precipitation patterns,both globally and locally,under the G1ext scenario.The generated datasets have been released on the Earth System Grid Federation data server,providing insight into the potential efficacy and impact of solar geoengineering strategies.展开更多
The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−M...The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−Mg alloys in different aging states were characterized.Additionally,the hardness and electrical conductivity of the materials were investigated.Results show that the precipitation pattern in Cu−Ti−Cr−Mg alloys resembled that of binary Cu−Ti alloys,with Cr and Ti forming the intermetallic compound of Cr_(2)Ti during casting.The introduction of Cr and Mg increased the hardness of the alloy.Increasing the Mg content in the Cu−Ti−Cr−Mg alloy led to grain refinement and fast nucleation of continuous precipitates during the early aging stage.Moreover,the addition of Mg impeded discontinuous precipitate growth by segregating along the precipitate surfaces.Consequently,the Cu−4Ti−0.5Cr−1Mg alloy exhibited limited discontinuous precipitates at the grain boundaries and a gradual decline in hardness during the over-aging period.展开更多
Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the int...Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the intensity of summer precipitation is often largely underestimated in many current dynamic models.This study uses a deep learning method called Cycle-Consistent Generative Adversarial Networks(CycleGAN)to improve the seasonal forecasts for June-JulyAugust precipitation in southeastern China by the Nanjing University of Information Science and Technology Climate Forecast System(NUIST-CFS 1.0).The results suggest that the CycleGAN-based model significantly improves the accuracy in predicting the spatiotemporal distribution of summer precipitation compared to the traditional quantile mapping(QM)method.Using the unpaired bias-correction model,we can also obtain advanced forecasts of the frequency,intensity,and duration of extreme precipitation events over the dynamic model predictions.This study expands the potential applications of deep learning models toward improving seasonal precipitation forecasts.展开更多
The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the compl...The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the complex precipitation sequences.Here,a detailed investigation has been carried out on the atomic struc-tural evolution of T_(1) precipitate in an aged Al-Cu-Li-Mg-Ag alloy using state-of-the-art Cs-corrected high-angle annular dark field(HAADF)-coupled with integrated differential phase contrast(iDPC)-scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDXS)techniques.An intermediate T_(1)’phase between T_(1p) and T_(1) phase,with a crystal structure and orientation rela-tionship consistent with T_(1),but exhibiting different atomic occupancy and chemical composition was found.We observed the atomic structural transformation from T_(1p) to T_(1)’phase(fcc→hcp),involving only 1/12<112>Al shear component.DFT calculation results validated our proposed structural models and the precipitation sequence.Besides,the distributions of minor solute elements(Ag,Mg,and Zn)in the pre-cipitates exhibited significant differences.These findings may contribute to a further understanding of the nucleation mechanism of T_(1) precipitate.展开更多
Gadolinium(Gd)is one of the most effective strengthening elements for magnesium alloys.The development of commercially available Mg-Gd alloys with high Gd content and the optimization of their preparation processes ha...Gadolinium(Gd)is one of the most effective strengthening elements for magnesium alloys.The development of commercially available Mg-Gd alloys with high Gd content and the optimization of their preparation processes have been a major focus in magnesium alloy research.In this study,a Mg-23Gd-2Zn-0.4Zr alloy with ultra-high Gd content is designed,and high-quality fabrication is achieved using laser-directed energy deposition(LDED)technology.Through heat treatment and microstructure control,a balance between tensile strength(425 MPa)and elongation(3.4%)is achieved.The ultra-high strength of the LDED-T6 VZ232K alloy is primarily attributed to precipitation strengthening caused by the ultra-high density(2.4×10^(4)μm^(-2))ofβphase.The high ductility is mainly due to the modification of the fracture mode,facilitated by the introduction of a substantial number of stacking fault structures during solution heat treatment.The extended hardness plateau(exceeding 138 Hv)and high yield strength(exceeding 300 MPa)are associated with the three-directional cross-interlocked structure of theβphase in the over-aged state at 220℃ and 250℃.The analysis of the LDED-VZ232K alloy indicates that reduced heat input during the additive manufacturing(AM)process is critical for the defect-free fabrication of alloys with ultra-high Gd content.展开更多
Precipitation is often used for the preparation of La(OH)_(3)with precipitants of liquid alkali and ammonia.To solve the problems of high cost and wastewater pollution caused by common precipitants,the active MgO synt...Precipitation is often used for the preparation of La(OH)_(3)with precipitants of liquid alkali and ammonia.To solve the problems of high cost and wastewater pollution caused by common precipitants,the active MgO synthesized by pyrolysis was used as the precipitant to prepare La(OH)_(3).The species distribution of LaCl_(3)and LaCl_(3)-MgCl_(2)mixed system solution was calculated,and the kinetic analysis of the precipi-tation process was carried out to confirm the key factors influencing the precipitation of La(OH)_(3).The results show that La(OH)_(3)with D_(50)of 5.57μm,a specific surface area of 25.70 m^(2)/g,a rod-like shape,and MgO content of 0.044 wt%,was successfully prepared by adding active MgO.The precipitation ratio of La reaches 99.92%.The La(OH)_(3)precipitation is controlled by the diffusion process.The activity of MgO has a significant influence on MgO content in the precipitate.The preparation of La(OH)_(3)by active MgO provides a potential way for an eco-friendly preparation method of rare earth.展开更多
Recent studies have shown that synergistic precipitation of continuous precipitates(CPs)and discontinuous precipitates(DPs)is a promising method to simultaneously improve the strength and electrical conductivity of Cu...Recent studies have shown that synergistic precipitation of continuous precipitates(CPs)and discontinuous precipitates(DPs)is a promising method to simultaneously improve the strength and electrical conductivity of Cu-Ni-Si alloy.However,the complex relationship between precipitates and two-stage aging process presents a significant challenge for the optimization of process parameters.In this study,machine learning models were established based on orthogonal experiment to mine the relationship between two-stage aging parameters and properties of Cu-5.3Ni-1.3Si-0.12Nb alloy with preferred formation of DPs.Two-stage aging parameters of 400℃/75 min+400℃/30 min were then obtained by multi-objective optimization combined with an experimental iteration strategy,resulting in a tensile strength of 875 MPa and a conductivity of 41.43%IACS,respectively.Such an excellent comprehensive performance of the alloy is attributed to the combined precipitation of DPs and CPs(with a total volume fraction of 5.4%and a volume ratio of CPs to DPs of 6.7).This study could provide a new approach and insight for improving the comprehensive properties of the Cu-Ni-Si alloys.展开更多
In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate p...In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate precipitation of the semi-coherent~Mg_(3)Zn phase.The aging softening of the studied alloy is mainly caused by the rapid transformation of the strengthening~Mg_(3)Zn phase to the softening MgLi(Al,Zn)phase,along with the coarsening of theα-Mg matrix and precipitates withinβ-Li matrix.Further analysis indicates that the quick precipitation and transformation of~Mg_(3)Zn is a consequence of the high diffusion rate of solute atoms,resulting from dense vacancy concentration in theβ-Li matrix.This research bridges a critical gap in the study of aging mechanism in the dual-phase Mg-Li-Al-Zn alloy,providing a theoretical basis for the development and application of high-performance and thermal-stable Mg-Li alloys.展开更多
For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a bala...For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a balance of strength and plasticity.In the present study,the microstructure and high-temperature properties of a novel cast nickel-based superalloy K4800 were investigated after being sub-jected to three heat treatments(HT)procedures,namely HT1:1180℃/4 h+1090℃/2 h+800℃/16 h,HT2:1180℃/4 h+1060℃/2 h+800℃/16 h and HT3:1180℃/4 h+800℃/16 h.It was found that the sub-solvus aging treatments at 1090 and 1060℃ precipitated sub-micron-sized(∼300 nm)primaryγʹphase which enhanced the ductility during 800℃ tensile(the total elongation of T1,T2,and T3 sam-ples were 6.75%,7.3%,and 3.25%,respectively)without evidently impairing the strength.After careful microstructure observation and deformation mechanism analysis,the enhancement of elongation was ra-tionalized that the precipitation of the sub-micron-sized primaryγʹphase decreased the volume-fraction and size of the nanometer-sizedγʹphase which was precipitated at 800℃,and simultaneously,pro-moted the dislocation movement by suppressing the non-planar slip.However,an excessive amount of the sub-micron-sized primaryγʹphase led to a faster ripening process of the nanometer-sizedγʹduring creep,which decreased the creep life at 800℃/430 MPa(T1:125 h,T2:199 h,and T3:198 h).Based on this,we monitored the number density of nanometer-sizedγʹphase coexisting with different amounts of largeγʹduring creep.An area fraction less than 7%of the sub-micron-sizedγʹphase was considered to have little detrimental effect on the creep life of K4800 alloy,which corresponded to a sub-solvus temperature range about 1080-1090℃.展开更多
Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere couplin...Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere coupling and the individual roles of each factor, but the synergistic effect of the two factors remains unclear. This study considers the covariation of evapotranspiration and precipitation to assess evapotranspiration–precipitation(ET–P) coupling across northern China,exploring its spatial variations and their linkage to water and heat factors. Our findings reveal a transition from strongly positive coupling in the northwest to weakly negative coupling in the southeast, peaking in spring. These spatial variations are attributable to water(soil moisture) and heat(air temperature), which explain 39% and 25% of the variability,respectively. The aridity index(AI), a water–heat synergy factor, is the dominant factor, explaining 66% of the spatial variation in ET–P coupling. As the AI increases, ET–P coupling shifts from strongly positive to weakly negative, with an AI around 0.7. This shift is determined by a shift in the evapotranspiration–lifting condensation level(LCL) coupling under an AI change. Regions with an AI below 0.7 experience water-limited evapotranspiration, where increased soil moisture enhances evapotranspiration, reduces sensible heat(H), and lowers the LCL, resulting in a negative ET–LCL coupling.Conversely, regions with an AI above 0.7 experience energy-limited evapotranspiration, where the positive ET–LCL coupling reflects a positive H–LCL coupling or a positive impact of the LCL on evapotranspiration. This analysis advances our understanding of the intricate influences of multifactor surface interactions on the spatial variations of land–atmosphere coupling.展开更多
Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this ...Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this work,the aging-hardening response of AZ80 alloy was effectively enhanced by applying cold-rolling deformation before conducting conventional aging treatment at 200°C.Compared to the directly aged sample,the yield strength of the pre-rolling and aged sample was increased by 35 MPa.Electron microscope examination confirmed that profuse{10¯11}and{10¯11}-{10¯12}twins,consisting of high density of dislocations and stacking faults,were generated by cold rolling.Blocky or ellipsoidal Mg_(17)Al_(12)precipitates formed at the twin boundaries(TBs)during subsequent aging treatment.Crystallographic analysis indicated that the precipitates at{10¯11}TBs always held an identical Potter OR with both the matrix and twin,while the precipitates at{10¯11}-{10¯12}TBs exhibited three different ORs:Burgers OR,Potter OR and P-S OR with either the matrix or the twin.Moreover,recrystallized grains were found inside{10¯11}-{10¯12}double twins after peak-aging at 200°C,implying that precipitation and recrystallization might occur concurrently along TBs at a relatively low temperature.It was speculated that the highly stored energy inside twins and the high elastic energy between the precipitates and twins were driving factors for the occurrence of recrystallization.展开更多
High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabrica...High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabricated via hot extrusion.The effects of La and Ce additions on the microstructure,thermal conductivity,and mechanical properties of the Mg-1.5Mn alloy were investigated.The results indicated that both the as-extruded Mg-1.5Mn-2.5La and Mg-1.5Mn-2.5Ce alloys exhibited a bimodal grain structure,with dynamically precipitated nano-scaleα-Mn phases.In comparison with La,the addition of Ce enhanced the dynamic precipitation more effectively during hot extrusion,while its influence on promoting the dynamic recrystallization was relatively weaker.The high tensile strength obtained in the as-extruded Mg-1.5Mn-2.5RE alloys can be attributed to the combined influence of the bimodal grain structure(with fine dynamic recrystallized(DRXed)grain size and high proportion of un-dynamic recrystallized(unDRXed)grains),dense nano-scale precipitates,and broken Mg12RE phases,while the remarkable thermal conductivity was due to the precipitation of Mn-rich phases from the Mg matrix.展开更多
How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will...How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will be lost.To overcome the strength-ductility trade-off,the strategy of this study is to induce the formation of high-density nanoprecipitates through dual aging(DA),triggering multiple deformation mechanisms,to obtain HEAs with ultrahigh strength and ductility.First,the effect of precold deformation on precipitation behavior was studied using Ni_(35)(CoFe)_(55)V_(5)Nb_(5)(at.%)HEAas the object.The results reveal that the activation energy of recrystallization is 112.2 kJ/mol.As the precold-deformation amount increases from 15%to 65%,the activation energy of precipitation gradually decreases from 178.8 to 159.7 kJ/mol.The precipitation time shortens,the size of the nanoprecipitate decreases,and the density increases.Subsequently,the thermal treatment parameters were optimized,and the DA process was customized based on the effect of precold deformation on precipitation behavior.High-density L1_(2) nanoprecipitates(~3.21×10^(25) m^(-3))were induced in the 65% precold-deformed HEA,which led to the simultaneous formation of twins and stacking fault(SF)networks during deformation.The yield strength(YS),ultimate tensile strength,and ductility of the DA-HEA are~2.0 GPa,~2.2 GPa,and~12.3%,respectively.Compared with the solid solution HEA,the YS of the DA-HEA increased by 1,657 MPa,possessing an astonishing increase of~440%.The high YS stems from the precipitation strengthening contributed by the L1_(2) nanoprecipitates and the dislocation strengthening contributed by precold deformation.The synergistically enhanced ductility stems from the high strain-hardening ability under the dual support of twinning-induced plasticity and SF-induced plasticity.展开更多
Precipitation via thermal treatments is among the most effective approaches to strengthening and is widely applied in the Al industry. Thermal treatments combined with deformation are capable of finely regulating the ...Precipitation via thermal treatments is among the most effective approaches to strengthening and is widely applied in the Al industry. Thermal treatments combined with deformation are capable of finely regulating the process of precipitation and distribution of precipitates. Deformation-induced defects exert significant impacts on the precipitation and already present precipitates, which however is often overlooked. In this study, the interactions between deformation and precipitation/precipitates, and their impacts on mechanical properties were systematically investigated in the solution-treated (ST) Al-0.61Mg-1.17Si-0.5Cu (wt.%), processed by multi-pass equal channel angular pressing (ECAP) and thermal treatments. Novel deformation-mediated cyclic evolution of precipitates is discovered: ST→ (1,2 passes: deformation induced precipitation) Guinier Preston (GP) zones→ (An250/30) Q’ and L phases→ (3-pass: deformation induced fragmentation/resolution) spherical precipitates→ (4-pass: deformation induced further fragmentation/resolution) GP zones. On this basis, we extend the quasi-binary phase diagram of Al-Mg_(2)Si along deformation as the third dimension and construct an innovative defect phase diagram for the Al-Mg-Si-based system. To testify to the effect of deformation-mediated cyclic evolution of precipitation/precipitates on the optimum mechanical properties, peak-aging treatments were performed in samples of ST and 3-pass states. Based on the microscopic characterizations, a distinctive mechanism of peak-aging strengthening is proposed. Notably in the 3-pass ECAPed and peak-aged sample the dominant strengthening phases become the L precipitates that thrived from the segmented and spherical L phases, rather than β’’ precipitates in the solely peak-aged ST sample. Our work provides a feasible example for exploring the combined processing technique of multi-step deformation and thermal treatments, to optimize the mechanical properties.展开更多
基金supported by the National Natural Science Foundation of China[grant numbers 42275185 and 42205032]the Fundamental Research Funds for the Central Universities[grant number B250201118]。
文摘Northeast China(NEC),a critical agricultural and ecological zone,has experienced intensified hydrological variability under global warming,with cascading impacts on food security and ecosystem resilience.This study utilized observational data and two new generation reanalysis products(i.e.,the fifth major global reanalysis produced by ECMWF(ERA5)and the Japanese Reanalysis for Three Quarters of a Century(JRA-3Q))to investigate the shift changes in precipitation in NEC around 2000 and associated water vapor transport.The analysis identified a pivotal interdecadal shift in 1998/99,transitioning from moderate increases(17.5 mm/10 yr during 1980-1998)to accelerated but more variable precipitation growth(85.4 mm/10 yr post-1999).While the mean precipitation during the post-shift period decreased,enhanced anticyclonic circulation amplified moisture divergence over continental NEC,redirecting vapor flux toward coastal regions.Crucially,trajectory analysis demonstrated regime-dependent moisture sourcing:midlatitude westerlies dominated during wet extremes(44% of trajectories in 1998),whereas East Asian monsoon flows prevailed in drought years(36% of trajectories in 2007).The post-1998 period exhibited increased reliance on localized recycling(45%of mid-tropospheric trajectories),reflecting weakened monsoonal inflow.These findings highlight NEC’s growing vulnerability to competing moisture pathways and atmospheric blocking-a dual mechanism that explains rising extremes despite declining mean precipitation.By reconciling dataset discrepancies(ERA5 vs.JRA-3Q trends)and elucidating circulation-precipitation linkages,this work provides actionable insights for climate-resilient agriculture in NEC’s water-stressed ecosystems.
基金jointly supported by the National Natural Science Foundation of China[grant numbers U2342202,42175005,and 42175016]the Qing Lan Project[grant number R2023Q06]。
文摘This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.
基金jointly supported by the Second Tibetan Plateau Scientific Expedition and Research Program[grant number-ber 2019QZKK0103]the National Natural Science Foundation of China[grant number 42293294]the China Meteorological Admin-istration Climate Change Special Program[grant number QBZ202303]。
文摘Using multi-source reanalysis data,this study examines the relationship between the tropical Pacific-Atlantic SST Dipole Mode(TPA-DM)and summer precipitation in North China(NCSP)on the interannual timescale during the period of 1979-2022.The results show that the TPA-DM,the dominant pattern of interannual variability in the tropical Pacific and Atlantic regions,exhibits a significant negative correlation with NCSP.The positive phase of TPA-DM induces subsidence over the Maritime Continent through a zonal circulation pattern,which initiates a Pacific-Japan-like wave train along the East Asian coast.The circulation anomalies lead to moisture deficits and convergence subsidence over North China,leading to below-normal rainfall.Further analysis reveals that cooler SST in the Southern Tropical Atlantic facilitates the persistence of the TPA-DM by stimulating the anomalous Walker circulation associated with wind-evaporation-SST-convection feedback.
基金supported by the National Natural Science Foundation of China[grant numbers 41975087,U2242212,and 41975085]supported by the National Natural Science Foundation of China[grant number U2242212]。
文摘Based on reanalysis data from 1979 to 2021,this study explores the spatial distribution of the Southern Indian Ocean Dipole(SIOD)and its individual and synergistic effects with the El Niño-Southern Oscillation(ENSO)on summer precipitation in China.The inverse phase spatial distribution of sea surface temperature anomalies(SSTAs)in the southwest and northeast of the southern Indian Ocean is defined as the SIOD.Positive SIOD events(positive SSTAs in the southwest,negative SSTAs in the northeast)are associated with La Niña events(Central Pacific(CP)type),while negative SIOD events(negative SSTAs in the southwest,positive SSTAs in the northeast)are associated with El Niño events(Eastern Pacific(EP)type).Both SIOD and ENSO have certain impacts on summer precipitation in China.Precipitation in the Yangtze River basin decreases,while precipitation in southern China increases during pure positive SIOD(P_PSIOD)events.During pure negative SIOD(P_NSIOD)events,the changes in precipitation are exactly the opposite of those during P_PSIOD events,which may be due to differences in the cross-equatorial flow in the southern Indian Ocean,particularly in low-level Australian cross-equatorial flow.When positive SIOD and CP-type La Niña events occur simultaneously(PSIOD+La_Niña),precipitation increases in the Yangtze-Huaihe River basin,while it decreases in northern China.When negative SIOD and EP-type El Niño events occur simultaneously(NSIOD+El_Niño),precipitation in the Yangtze-Huaihe River basin is significantly lower than during P_NSIOD events.This is caused by differences in water vapor originating from the Pacific Ocean during different events.
基金funded by the National Natural Science Foundation of China(Grant No.42275039)the Meteorological Joint Fund by NSF and CMA(Grant No.U2342224)+1 种基金the National Key R&D Program of China(Grant No.2022YFC3701202)the S&T Development Fund of CAMS(Grant No.2024KJ019)。
文摘Global land monsoon precipitation(GLMP)is highly sensitive to changes in interhemispheric thermal contrast(ITC).Amplified interhemispheric asymmetries of GLMP due to enhanced ITC driven by high-level anthropogenic emissions are expected to simultaneously increase the probability of regional floods and droughts,threatening ecosystems within global terrestrial monsoon regions and the freshwater supply for billions of residents in these areas.In this study,the responses of GLMP to the evolution of ITC toward the carbon neutrality goal are assessed using multimodel outputs from a new model intercomparison project(CovidMIP).The results show that the Northern Hemisphere-Southern Hemisphere(NH-SH)asymmetry of GLMP in boreal summer weakens during the 2040s,as a persistent reduction in well-mixed greenhouse gas(WMGHG)emissions leads to a downward trend in the ITC after 2040.At the same time,the reduction in WMGHG emissions dampens the Eastern Hemisphere-Western Hemisphere(EH-WH)asymmetry of GLMP by inducing La Niña-like cooling and enhancing moisture transport to Inner America.The resulting increases in land monsoon precipitation(LMP)may alleviate drought under the global warming scenario by about 19%-25%and 7%-9%in the WH and SH monsoon regions,respectively.However,a persistent reduction in aerosol emissions in Asia will dominate the increases in LMP in this region until the mid-21st century,and these increases may be approximately 23%-60%of the growth under the global warming scenario.Our results highlight the different rates of response of aerosol and WMGHG concentrations to the carbon neutrality goal,leading to various changes in LMP at global and regional scales.
基金supported by the National Natural Science Foundation of China(Grant No.41875126)the National Key Scientific and Technological Infrastructure project “Earth System Numerical Simulation Facility”(EarthLab)。
文摘Solar radiation modification,a scheme aimed at mitigating rapid global warming triggered by anthropogenic greenhouse gas emissions,has been explored through the G1ext experiment under the Geoengineering Model Intercomparison Project(GeoMIP) framework,utilizing the Chinese Academy of Sciences Earth System Model version 2(CAS-ESM2.0).This paper briefly describes the basic configuration and experimental design of the CAS-ESM2.0 for G1ext,which involves a sudden reduction in solar irradiance to counterbalance the radiative forcing of an abrupt quadrupling of atmospheric CO_(2) concentration,running for 100 years.Preliminary results show that this model can reproduce well the compensatory effect of a uniform decrease in global solar radiation on the radiative forcing resulting from an abrupt quadrupling of CO_(2) concentration.Like other Earth system models,CAS-ESM2.0 reasonably captures variations in radiative adjustments,surface air temperature,and precipitation patterns,both globally and locally,under the G1ext scenario.The generated datasets have been released on the Earth System Grid Federation data server,providing insight into the potential efficacy and impact of solar geoengineering strategies.
基金supported by the National Natural Science Foundation of China(No.52201226)Fundamental Research Program of Shanxi Province,China(No.202103021223036)+1 种基金the Key Scientific Research Project in Shanxi Province,China(No.202102050201007)the special fund for Science and Technology Innovation Teams of Shanxi Province,China(No.202204051001004)。
文摘The effect of adding Cr and Mg on the microstructure and properties of Cu−Ti alloys was examined.Cu−Ti−Cr−Mg alloys were fabricated using vacuum induction melting.The microstructure and phase composition of Cu−Ti−Cr−Mg alloys in different aging states were characterized.Additionally,the hardness and electrical conductivity of the materials were investigated.Results show that the precipitation pattern in Cu−Ti−Cr−Mg alloys resembled that of binary Cu−Ti alloys,with Cr and Ti forming the intermetallic compound of Cr_(2)Ti during casting.The introduction of Cr and Mg increased the hardness of the alloy.Increasing the Mg content in the Cu−Ti−Cr−Mg alloy led to grain refinement and fast nucleation of continuous precipitates during the early aging stage.Moreover,the addition of Mg impeded discontinuous precipitate growth by segregating along the precipitate surfaces.Consequently,the Cu−4Ti−0.5Cr−1Mg alloy exhibited limited discontinuous precipitates at the grain boundaries and a gradual decline in hardness during the over-aging period.
基金supported by the National Key Research and Development Program of China(Grant No.2020YFA0608000)the National Natural Science Foundation of China(Grant No.42030605)+1 种基金CAAI-MindSpore Academic Fund Research Projects(CAAIXSJLJJ2023MindSpore11)the program of China Scholarships Council(No.CXXM2101180001)。
文摘Accurate seasonal precipitation forecasts,especially for extreme events,are crucial to preventing meteorological hazards and their potential impacts on national development,social activity,and security.However,the intensity of summer precipitation is often largely underestimated in many current dynamic models.This study uses a deep learning method called Cycle-Consistent Generative Adversarial Networks(CycleGAN)to improve the seasonal forecasts for June-JulyAugust precipitation in southeastern China by the Nanjing University of Information Science and Technology Climate Forecast System(NUIST-CFS 1.0).The results suggest that the CycleGAN-based model significantly improves the accuracy in predicting the spatiotemporal distribution of summer precipitation compared to the traditional quantile mapping(QM)method.Using the unpaired bias-correction model,we can also obtain advanced forecasts of the frequency,intensity,and duration of extreme precipitation events over the dynamic model predictions.This study expands the potential applications of deep learning models toward improving seasonal precipitation forecasts.
基金supported by the Pre-research fund(No.412130024).
文摘The T_(1)(Al_(2) CuLi)phase is one of the most effective strengthening nanoscale-precipitate in Al-Cu alloys with Li.However,its formation and evolution still need to be further clarified during aging due to the complex precipitation sequences.Here,a detailed investigation has been carried out on the atomic struc-tural evolution of T_(1) precipitate in an aged Al-Cu-Li-Mg-Ag alloy using state-of-the-art Cs-corrected high-angle annular dark field(HAADF)-coupled with integrated differential phase contrast(iDPC)-scanning transmission electron microscopy(STEM)and energy-dispersive X-ray spectroscopy(EDXS)techniques.An intermediate T_(1)’phase between T_(1p) and T_(1) phase,with a crystal structure and orientation rela-tionship consistent with T_(1),but exhibiting different atomic occupancy and chemical composition was found.We observed the atomic structural transformation from T_(1p) to T_(1)’phase(fcc→hcp),involving only 1/12<112>Al shear component.DFT calculation results validated our proposed structural models and the precipitation sequence.Besides,the distributions of minor solute elements(Ag,Mg,and Zn)in the pre-cipitates exhibited significant differences.These findings may contribute to a further understanding of the nucleation mechanism of T_(1) precipitate.
基金financially supported by the National Key Research and Development Pragram of China(Grant No.2023YFB4603300)。
文摘Gadolinium(Gd)is one of the most effective strengthening elements for magnesium alloys.The development of commercially available Mg-Gd alloys with high Gd content and the optimization of their preparation processes have been a major focus in magnesium alloy research.In this study,a Mg-23Gd-2Zn-0.4Zr alloy with ultra-high Gd content is designed,and high-quality fabrication is achieved using laser-directed energy deposition(LDED)technology.Through heat treatment and microstructure control,a balance between tensile strength(425 MPa)and elongation(3.4%)is achieved.The ultra-high strength of the LDED-T6 VZ232K alloy is primarily attributed to precipitation strengthening caused by the ultra-high density(2.4×10^(4)μm^(-2))ofβphase.The high ductility is mainly due to the modification of the fracture mode,facilitated by the introduction of a substantial number of stacking fault structures during solution heat treatment.The extended hardness plateau(exceeding 138 Hv)and high yield strength(exceeding 300 MPa)are associated with the three-directional cross-interlocked structure of theβphase in the over-aged state at 220℃ and 250℃.The analysis of the LDED-VZ232K alloy indicates that reduced heat input during the additive manufacturing(AM)process is critical for the defect-free fabrication of alloys with ultra-high Gd content.
基金the National Key Research and Development Program of China(2022YFB3504503)the National Natural Science Foundation of China(52274355)the Gansu Province Science and Technology Major Special Project,China(22ZD6GD061).
文摘Precipitation is often used for the preparation of La(OH)_(3)with precipitants of liquid alkali and ammonia.To solve the problems of high cost and wastewater pollution caused by common precipitants,the active MgO synthesized by pyrolysis was used as the precipitant to prepare La(OH)_(3).The species distribution of LaCl_(3)and LaCl_(3)-MgCl_(2)mixed system solution was calculated,and the kinetic analysis of the precipi-tation process was carried out to confirm the key factors influencing the precipitation of La(OH)_(3).The results show that La(OH)_(3)with D_(50)of 5.57μm,a specific surface area of 25.70 m^(2)/g,a rod-like shape,and MgO content of 0.044 wt%,was successfully prepared by adding active MgO.The precipitation ratio of La reaches 99.92%.The La(OH)_(3)precipitation is controlled by the diffusion process.The activity of MgO has a significant influence on MgO content in the precipitate.The preparation of La(OH)_(3)by active MgO provides a potential way for an eco-friendly preparation method of rare earth.
基金financially supported by the National Key Research and Development Program of China(No.2023YFB3812601)the National Natural Science Foundation of China(Nos.51925401,92066205 and 92266301)the Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001).
文摘Recent studies have shown that synergistic precipitation of continuous precipitates(CPs)and discontinuous precipitates(DPs)is a promising method to simultaneously improve the strength and electrical conductivity of Cu-Ni-Si alloy.However,the complex relationship between precipitates and two-stage aging process presents a significant challenge for the optimization of process parameters.In this study,machine learning models were established based on orthogonal experiment to mine the relationship between two-stage aging parameters and properties of Cu-5.3Ni-1.3Si-0.12Nb alloy with preferred formation of DPs.Two-stage aging parameters of 400℃/75 min+400℃/30 min were then obtained by multi-objective optimization combined with an experimental iteration strategy,resulting in a tensile strength of 875 MPa and a conductivity of 41.43%IACS,respectively.Such an excellent comprehensive performance of the alloy is attributed to the combined precipitation of DPs and CPs(with a total volume fraction of 5.4%and a volume ratio of CPs to DPs of 6.7).This study could provide a new approach and insight for improving the comprehensive properties of the Cu-Ni-Si alloys.
基金supported by the Foundation Strengthening Plan Technical Field Fund(No.2021-JJ-0112)Major Scientific and Technological Innovation Project of Luoyang(No.2201029A)+1 种基金National Science and Technology Innovation Special Zone(No.02-14-01)National Natural Science Foundation of China(No.U2037601).
文摘In this work,the aging response and mechanism of dual-phase Mg-Li-Al-Zn alloy at various temperatures are investigated.The results show that the strengthening after quenching is primarily attributed to the immediate precipitation of the semi-coherent~Mg_(3)Zn phase.The aging softening of the studied alloy is mainly caused by the rapid transformation of the strengthening~Mg_(3)Zn phase to the softening MgLi(Al,Zn)phase,along with the coarsening of theα-Mg matrix and precipitates withinβ-Li matrix.Further analysis indicates that the quick precipitation and transformation of~Mg_(3)Zn is a consequence of the high diffusion rate of solute atoms,resulting from dense vacancy concentration in theβ-Li matrix.This research bridges a critical gap in the study of aging mechanism in the dual-phase Mg-Li-Al-Zn alloy,providing a theoretical basis for the development and application of high-performance and thermal-stable Mg-Li alloys.
文摘For nickel-based superalloys with medium volume-fractionγʹphase(20%-40%),dual or multi-stage aging treatments are usually conducted to generate a microstructure containing the multimodal distri-bution ofγʹfor a balance of strength and plasticity.In the present study,the microstructure and high-temperature properties of a novel cast nickel-based superalloy K4800 were investigated after being sub-jected to three heat treatments(HT)procedures,namely HT1:1180℃/4 h+1090℃/2 h+800℃/16 h,HT2:1180℃/4 h+1060℃/2 h+800℃/16 h and HT3:1180℃/4 h+800℃/16 h.It was found that the sub-solvus aging treatments at 1090 and 1060℃ precipitated sub-micron-sized(∼300 nm)primaryγʹphase which enhanced the ductility during 800℃ tensile(the total elongation of T1,T2,and T3 sam-ples were 6.75%,7.3%,and 3.25%,respectively)without evidently impairing the strength.After careful microstructure observation and deformation mechanism analysis,the enhancement of elongation was ra-tionalized that the precipitation of the sub-micron-sized primaryγʹphase decreased the volume-fraction and size of the nanometer-sizedγʹphase which was precipitated at 800℃,and simultaneously,pro-moted the dislocation movement by suppressing the non-planar slip.However,an excessive amount of the sub-micron-sized primaryγʹphase led to a faster ripening process of the nanometer-sizedγʹduring creep,which decreased the creep life at 800℃/430 MPa(T1:125 h,T2:199 h,and T3:198 h).Based on this,we monitored the number density of nanometer-sizedγʹphase coexisting with different amounts of largeγʹduring creep.An area fraction less than 7%of the sub-micron-sizedγʹphase was considered to have little detrimental effect on the creep life of K4800 alloy,which corresponded to a sub-solvus temperature range about 1080-1090℃.
基金jointly supported by the National Science Foundation of China (Grant No.42230611)the Meteorological Joint Fund (Grant No.U2142208)+2 种基金the Second Tibetan Plateau Scientific Expedition and Research (STEP) program (grant no.2019QZKK0102)the National Science Foundation of China (Grant No.42005071)the Gansu Province Key Talent Project (Grant No.2023RCXM37)。
文摘Northern China is a prominent “hotspot” for land–atmosphere interactions, with substantial gradients in both moisture and thermal conditions. Previous studies have identified a link between land–atmosphere coupling and the individual roles of each factor, but the synergistic effect of the two factors remains unclear. This study considers the covariation of evapotranspiration and precipitation to assess evapotranspiration–precipitation(ET–P) coupling across northern China,exploring its spatial variations and their linkage to water and heat factors. Our findings reveal a transition from strongly positive coupling in the northwest to weakly negative coupling in the southeast, peaking in spring. These spatial variations are attributable to water(soil moisture) and heat(air temperature), which explain 39% and 25% of the variability,respectively. The aridity index(AI), a water–heat synergy factor, is the dominant factor, explaining 66% of the spatial variation in ET–P coupling. As the AI increases, ET–P coupling shifts from strongly positive to weakly negative, with an AI around 0.7. This shift is determined by a shift in the evapotranspiration–lifting condensation level(LCL) coupling under an AI change. Regions with an AI below 0.7 experience water-limited evapotranspiration, where increased soil moisture enhances evapotranspiration, reduces sensible heat(H), and lowers the LCL, resulting in a negative ET–LCL coupling.Conversely, regions with an AI above 0.7 experience energy-limited evapotranspiration, where the positive ET–LCL coupling reflects a positive H–LCL coupling or a positive impact of the LCL on evapotranspiration. This analysis advances our understanding of the intricate influences of multifactor surface interactions on the spatial variations of land–atmosphere coupling.
基金financially supported by the National Natural Science Foundation of China(No.52071040 and 51871036)Natural Science Foundation of Shandong Province,China(No.ZR2022QE008)China Postdoctoral Science Foundation(No.2022M712984)。
文摘Although magnesium-aluminum alloys,such as AZ80 and AZ91 have promising application potential in automotive,high-speed train and aerospace fields,their age-hardening response is generally not very appreciable.In this work,the aging-hardening response of AZ80 alloy was effectively enhanced by applying cold-rolling deformation before conducting conventional aging treatment at 200°C.Compared to the directly aged sample,the yield strength of the pre-rolling and aged sample was increased by 35 MPa.Electron microscope examination confirmed that profuse{10¯11}and{10¯11}-{10¯12}twins,consisting of high density of dislocations and stacking faults,were generated by cold rolling.Blocky or ellipsoidal Mg_(17)Al_(12)precipitates formed at the twin boundaries(TBs)during subsequent aging treatment.Crystallographic analysis indicated that the precipitates at{10¯11}TBs always held an identical Potter OR with both the matrix and twin,while the precipitates at{10¯11}-{10¯12}TBs exhibited three different ORs:Burgers OR,Potter OR and P-S OR with either the matrix or the twin.Moreover,recrystallized grains were found inside{10¯11}-{10¯12}double twins after peak-aging at 200°C,implying that precipitation and recrystallization might occur concurrently along TBs at a relatively low temperature.It was speculated that the highly stored energy inside twins and the high elastic energy between the precipitates and twins were driving factors for the occurrence of recrystallization.
基金supported by National Key Research&Development Program of China(Grant Nos.2021YFB3703300,2021YFE010016 and 2020YFA0405900)National Natural Science Foundation(Grant Nos.52220105003 and 51971075)+2 种基金the Fundamental Research Funds for the Central Universities(Grant No.FRFCU5710000918)Natural Science Foundation of Heilongjiang Province-Outstanding Youth Fund(Grant No.YQ2020E006)JSPS KAKENHI(Grant No.JP21H01669).
文摘High thermal conductivity and high strength Mg-1.5Mn-2.5Ce alloy with a tensile yield strength of 387.0 MPa,ultimate tensile strength of 395.8 MPa,and thermal conductivity of 142.1 W/(m·K)was successfully fabricated via hot extrusion.The effects of La and Ce additions on the microstructure,thermal conductivity,and mechanical properties of the Mg-1.5Mn alloy were investigated.The results indicated that both the as-extruded Mg-1.5Mn-2.5La and Mg-1.5Mn-2.5Ce alloys exhibited a bimodal grain structure,with dynamically precipitated nano-scaleα-Mn phases.In comparison with La,the addition of Ce enhanced the dynamic precipitation more effectively during hot extrusion,while its influence on promoting the dynamic recrystallization was relatively weaker.The high tensile strength obtained in the as-extruded Mg-1.5Mn-2.5RE alloys can be attributed to the combined influence of the bimodal grain structure(with fine dynamic recrystallized(DRXed)grain size and high proportion of un-dynamic recrystallized(unDRXed)grains),dense nano-scale precipitates,and broken Mg12RE phases,while the remarkable thermal conductivity was due to the precipitation of Mn-rich phases from the Mg matrix.
基金supported by the National Key Research and Development Project(No.2023YFA1600082)the National Natural Science Foundation of China(Nos.U2141207,52001083,52171111)+3 种基金Natural Science Foundation of Heilongjiang(No.YQ2023E026)the Fundamental Research Funds for the Central Universities(No.3072022JIP1002)Key Laboratory Found of the Ministry of Industry and Information Technology(No.GXB202201)Youth Talent Project of China National Nuclear Corporation(No.CNNC2021YTEP-HEU01).
文摘How to achieve high-entropy alloys(HEAs)with ultrahigh strength and ductility is a challenging issue.Precipitation strengthening is one of the methods to significantly enhance strength,but unfortunately,ductility will be lost.To overcome the strength-ductility trade-off,the strategy of this study is to induce the formation of high-density nanoprecipitates through dual aging(DA),triggering multiple deformation mechanisms,to obtain HEAs with ultrahigh strength and ductility.First,the effect of precold deformation on precipitation behavior was studied using Ni_(35)(CoFe)_(55)V_(5)Nb_(5)(at.%)HEAas the object.The results reveal that the activation energy of recrystallization is 112.2 kJ/mol.As the precold-deformation amount increases from 15%to 65%,the activation energy of precipitation gradually decreases from 178.8 to 159.7 kJ/mol.The precipitation time shortens,the size of the nanoprecipitate decreases,and the density increases.Subsequently,the thermal treatment parameters were optimized,and the DA process was customized based on the effect of precold deformation on precipitation behavior.High-density L1_(2) nanoprecipitates(~3.21×10^(25) m^(-3))were induced in the 65% precold-deformed HEA,which led to the simultaneous formation of twins and stacking fault(SF)networks during deformation.The yield strength(YS),ultimate tensile strength,and ductility of the DA-HEA are~2.0 GPa,~2.2 GPa,and~12.3%,respectively.Compared with the solid solution HEA,the YS of the DA-HEA increased by 1,657 MPa,possessing an astonishing increase of~440%.The high YS stems from the precipitation strengthening contributed by the L1_(2) nanoprecipitates and the dislocation strengthening contributed by precold deformation.The synergistically enhanced ductility stems from the high strain-hardening ability under the dual support of twinning-induced plasticity and SF-induced plasticity.
基金supported by the National Natural Science Foundation of China(Grant Nos.U22A20187,52171007,52371111,and 52371177).
文摘Precipitation via thermal treatments is among the most effective approaches to strengthening and is widely applied in the Al industry. Thermal treatments combined with deformation are capable of finely regulating the process of precipitation and distribution of precipitates. Deformation-induced defects exert significant impacts on the precipitation and already present precipitates, which however is often overlooked. In this study, the interactions between deformation and precipitation/precipitates, and their impacts on mechanical properties were systematically investigated in the solution-treated (ST) Al-0.61Mg-1.17Si-0.5Cu (wt.%), processed by multi-pass equal channel angular pressing (ECAP) and thermal treatments. Novel deformation-mediated cyclic evolution of precipitates is discovered: ST→ (1,2 passes: deformation induced precipitation) Guinier Preston (GP) zones→ (An250/30) Q’ and L phases→ (3-pass: deformation induced fragmentation/resolution) spherical precipitates→ (4-pass: deformation induced further fragmentation/resolution) GP zones. On this basis, we extend the quasi-binary phase diagram of Al-Mg_(2)Si along deformation as the third dimension and construct an innovative defect phase diagram for the Al-Mg-Si-based system. To testify to the effect of deformation-mediated cyclic evolution of precipitation/precipitates on the optimum mechanical properties, peak-aging treatments were performed in samples of ST and 3-pass states. Based on the microscopic characterizations, a distinctive mechanism of peak-aging strengthening is proposed. Notably in the 3-pass ECAPed and peak-aged sample the dominant strengthening phases become the L precipitates that thrived from the segmented and spherical L phases, rather than β’’ precipitates in the solely peak-aged ST sample. Our work provides a feasible example for exploring the combined processing technique of multi-step deformation and thermal treatments, to optimize the mechanical properties.
