High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. ...High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.展开更多
A 40 Gb/s high speed optical transmission system is designed, and the different dispersion compensation schemes are adopted to realize the transmission of the optical duo-binary (ODB) signals over 120 km optical fiber...A 40 Gb/s high speed optical transmission system is designed, and the different dispersion compensation schemes are adopted to realize the transmission of the optical duo-binary (ODB) signals over 120 km optical fiber. Optical duo-binary signals are generated by using a precoder, two low- pass filters (LPF) and one mach-zehnder modulator (MZM). Through combination of dispersion compensation fiber (DCF) and single mode fiber (SMF) in the transmission link, four different dispersion compensation schemes (pre-compensation, post-compensation and hybrid compensation (pre+ post) and hybrid compensation (post+ pre)) were compared. Analyzing Q factor, BER, eye diagrams and receiver sensitivity in several dispersion compensation schemes, the simulation results are: the cut-off frequency of LPF affects the transmission performance, and the hybrid compensation (post+ pre) scheme is the optimal dispersion compensation method.展开更多
The propagation of seismic waves in viscous media,such as the loess plateau and shallow gas regions,alters their amplitude,frequency,and phase due to absorption attenuation,resulting in reductions in the resolution an...The propagation of seismic waves in viscous media,such as the loess plateau and shallow gas regions,alters their amplitude,frequency,and phase due to absorption attenuation,resulting in reductions in the resolution and fidelity of seismic profiles and the inaccurate identification of subtle structure and lithology.Q modeling and Q migration techniques proposed in this paper are used to compensate for the energy and frequency attenuation of seismic waves,obtain high-quality depth imaging results,and further enhance structural imaging to address the aforementioned problem.First,various prior information is utilized to construct an initial Q model.Q tomography techniques are employed to further optimize the precision of the initial Q model and build a high-precision Q model.Subsequently,Q prestack depth migration technology is employed to compensate for absorption and attenuation in the three-dimensional space along the seismic wave propagation path and correct the travel times,realizing the purposes of amplitude compensation,frequency recovery,and phase correction,which can help improve the wave group characteristics while enhancing the resolution.Model data and practical application results demonstrate that high-precision Q modeling and Q migration techniques can substantially improve the imaging quality of underground structures and formations in the loess plateau region with extremely complex surface and near-surface conditions.The resolution and fidelity of seismic data,as well as the capability to identify reservoirs,can be improved using these techniques.展开更多
基金supported by China Petroleum Technology Innovation Fund Project(Grant No.0610740122)
文摘High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.
文摘A 40 Gb/s high speed optical transmission system is designed, and the different dispersion compensation schemes are adopted to realize the transmission of the optical duo-binary (ODB) signals over 120 km optical fiber. Optical duo-binary signals are generated by using a precoder, two low- pass filters (LPF) and one mach-zehnder modulator (MZM). Through combination of dispersion compensation fiber (DCF) and single mode fiber (SMF) in the transmission link, four different dispersion compensation schemes (pre-compensation, post-compensation and hybrid compensation (pre+ post) and hybrid compensation (post+ pre)) were compared. Analyzing Q factor, BER, eye diagrams and receiver sensitivity in several dispersion compensation schemes, the simulation results are: the cut-off frequency of LPF affects the transmission performance, and the hybrid compensation (post+ pre) scheme is the optimal dispersion compensation method.
基金supported by the China National Offshore Oil Corporation’s“14th Five-Year Plan”major scientific and technological project,“Key Technologies for Onshore Unconventional Natural Gas Exploration and Development”(KJGG2021-1000).
文摘The propagation of seismic waves in viscous media,such as the loess plateau and shallow gas regions,alters their amplitude,frequency,and phase due to absorption attenuation,resulting in reductions in the resolution and fidelity of seismic profiles and the inaccurate identification of subtle structure and lithology.Q modeling and Q migration techniques proposed in this paper are used to compensate for the energy and frequency attenuation of seismic waves,obtain high-quality depth imaging results,and further enhance structural imaging to address the aforementioned problem.First,various prior information is utilized to construct an initial Q model.Q tomography techniques are employed to further optimize the precision of the initial Q model and build a high-precision Q model.Subsequently,Q prestack depth migration technology is employed to compensate for absorption and attenuation in the three-dimensional space along the seismic wave propagation path and correct the travel times,realizing the purposes of amplitude compensation,frequency recovery,and phase correction,which can help improve the wave group characteristics while enhancing the resolution.Model data and practical application results demonstrate that high-precision Q modeling and Q migration techniques can substantially improve the imaging quality of underground structures and formations in the loess plateau region with extremely complex surface and near-surface conditions.The resolution and fidelity of seismic data,as well as the capability to identify reservoirs,can be improved using these techniques.
