With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs ...With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs can be finely characterized,and the seismic inversion results can clearly characterize the location of stratigraphic boundaries and meet the needs of accurate geological description.Specifically,for pre-stack AVO inversion,it is required to be able to distinguish smaller geological targets in the depth or time domain,and clearly depict the vertical boundaries of the geological objects.In response to the above requirements,we introduce the preprocessing regularization of the adaptive edge-preserving smooth filter into the pre-stack AVO elastic parameter inversion to clearly invert the position of layer boundary and improve the accuracy of the inversion results.展开更多
The brittleness index(BI)is crucial for predicting engineering sweet spots and designing fracturing operations in shale oil reservoir exploration and development.Seismic amplitude variation with offset(AVO)inversion i...The brittleness index(BI)is crucial for predicting engineering sweet spots and designing fracturing operations in shale oil reservoir exploration and development.Seismic amplitude variation with offset(AVO)inversion is commonly used to obtain the BI.Traditionally,velocity,density,and other parameters are firstly inverted,and the BI is then calculated,which often leads to accumulated errors.Moreover,due to the limited of well-log data in field work areas,AVO inversion typically faces the challenge of limited information,resulting in not high accuracy of BI derived by existing AVO inversion methods.To address these issues,we first derive an AVO forward approximation equation that directly characterizes the BI in P-wave reflection coefficients.Based on this,an intelligent AVO inversion method,which combines the advantages of traditional and intelligent approaches,for directly obtaining the BI is proposed.A TransUnet model is constructed to establish the strong nonlinear mapping relationship between seismic data and the BI.By incorporating a combined objective function that is constrained by both low-frequency parameters and training samples,the challenge of limited samples is effectively addressed,and the direct inversion of the BI is stably achieved.Tests on model data and applications on field data demonstrate the feasibility,advancement,and practicality of the proposed method.展开更多
Young's modulus and Poisson's ratio are crucial parameters for reservoir characterization and rock brittleness evaluation.Conventional methods often rely on indirect computation or approximations of the Zoeppr...Young's modulus and Poisson's ratio are crucial parameters for reservoir characterization and rock brittleness evaluation.Conventional methods often rely on indirect computation or approximations of the Zoeppritz equations to estimate Young's modulus,which can introduce cumulative errors and reduce the accuracy of inversion results.To address these issues,this paper introduces the analytical solution of the Zoeppritz equation into the inversion process.The equation is re-derived and expressed in terms of Young's modulus,Poisson's ratio,and density.Within the Bayesian framework,we construct an objective function for the joint inversion of PP and PS waves.Traditional gradient-based algorithms often suffer from low precision and the computational complexity.In this study,we address limitations of conventional approaches related to low precision and complicated code by using Circle chaotic mapping,Levy flights,and Gaussian mutation to optimize the quantum particle swarm optimization(QPSO),named improved quantum particle swarm optimization(IQPSO).The IQPSO demonstrates superior global optimization capabilities.We test the proposed inversion method with both synthetic and field data.The test results demonstrate the proposed method's feasibility and effectiveness,indicating an improvement in inversion accuracy over traditional methods.展开更多
Based on the empirical Gardner equation describing the relationship between density and compressional wave velocity, the converted wave reflection coefficient extrema attributes for AVO analysis are proposed and the r...Based on the empirical Gardner equation describing the relationship between density and compressional wave velocity, the converted wave reflection coefficient extrema attributes for AVO analysis are proposed and the relations between the extrema position and amplitude, average velocity ratio across the interface, and shear wave reflection coefficient are derived. The extrema position is a monotonically decreasing function of average velocity ratio, and the extrema amplitude is a function of average velocity ratio and shear wave reflection coefficient. For theoretical models, the average velocity ratio and shear wave reflection coefficient are inverted from the extrema position and amplitude obtained from fitting a power function to converted wave AVO curves. Shear wave reflection coefficient sections have clearer physical meaning than conventional converted wave stacked sections and establish the theoretical foundation for geological structural interpretation and event correlation. ＂The method of inverting average velocity ratio and shear wave reflection coefficient from the extrema position and amplitude obtained from fitting a power function is applied to real CCP gathers. The inverted average velocity ratios are consistent with those computed from compressional and shear wave well logs.展开更多
Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. ...Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. In this paper, we derive a new PS-wave reflection coefficient approximation equation which is more accurate at larger incidence angles. The equation is simplified for small incidence angles, which makes AVO analysis clearer and easier for angles less than 30 degrees. Based on this approximation, a PP/PS joint inversion is introduced. A real data example shows that oil sands, brine sands and shales can be differentiated based on the P- to S-wave velocity ratio from the PP/PS joint inversion. Fluid factors and Poisson＇s ratio also indicate an anomaly in the target zone at the oil well location.展开更多
Cauchy priori distribution-based Bayesian AVO reflectivity inversion may lead to sparse estimates that are sensitive to large reflectivities. For the inversion, the computation of the covariance matrix and regularized...Cauchy priori distribution-based Bayesian AVO reflectivity inversion may lead to sparse estimates that are sensitive to large reflectivities. For the inversion, the computation of the covariance matrix and regularized terms requires prior estimation of model parameters, which makes the iterative inversion weakly nonlinear. At the same time, the relations among the model parameters are assumed linear. Furthermore, the reflectivities, the results of the inversion, or the elastic parameters with cumulative error recovered by integrating reflectivities are not well suited for detecting hydrocarbons and fuids. In contrast, in Bayesian linear AVO inversion, the elastic parameters can be directly extracted from prestack seismic data without linear assumptions for the model parameters. Considering the advantages of the abovementioned methods, the Bayesian AVO reflectivity inversion process is modified and Cauchy distribution is explored as a prior probability distribution and the time-variant covariance is also considered. Finally, we propose a new method for the weakly nonlinear AVO waveform inversion. Furthermore, the linear assumptions are abandoned and elastic parameters, such as P-wave velocity, S-wave velocity, and density, can be directly recovered from seismic data especially for interfaces with large reflectivities. Numerical analysis demonstrates that all the elastic parameters can be estimated from prestack seismic data even when the signal-to-noise ratio of the seismic data is low.展开更多
Multiwave seismic technology promotes the application of joint PP–PS amplitude versus offset (AVO) inversion;however conventional joint PP–PS AVO inversioan is linear based on approximations of the Zoeppritz equatio...Multiwave seismic technology promotes the application of joint PP–PS amplitude versus offset (AVO) inversion;however conventional joint PP–PS AVO inversioan is linear based on approximations of the Zoeppritz equations for multiple iterations. Therefore the inversion results of P-wave, S-wave velocity and density exhibit low precision in the faroffset;thus, the joint PP–PS AVO inversion is nonlinear. Herein, we propose a nonlinear joint inversion method based on exact Zoeppritz equations that combines improved Bayesian inference and a least squares support vector machine (LSSVM) to solve the nonlinear inversion problem. The initial parameters of Bayesian inference are optimized via particle swarm optimization (PSO). In improved Bayesian inference, the optimal parameter of the LSSVM is obtained by maximizing the posterior probability of the hyperparameters, thus improving the learning and generalization abilities of LSSVM. Then, an optimal nonlinear LSSVM model that defi nes the relationship between seismic refl ection amplitude and elastic parameters is established to improve the precision of the joint PP–PS AVO inversion. Further, the nonlinear problem of joint inversion can be solved through a single training of the nonlinear inversion model. The results of the synthetic data suggest that the precision of the estimated parameters is higher than that obtained via Bayesian linear inversion with PP-wave data and via approximations of the Zoeppritz equations. In addition, results using synthetic data with added noise show that the proposed method has superior anti-noising properties. Real-world application shows the feasibility and superiority of the proposed method, as compared with Bayesian linear inversion.展开更多
Conventional AVO inversion utilizes the trace amplitudes of CMP gathers. There are three main factors affecting the accuracy of the inversion. First, CMP gathers are based on the hypothesis of horizontal layers but mo...Conventional AVO inversion utilizes the trace amplitudes of CMP gathers. There are three main factors affecting the accuracy of the inversion. First, CMP gathers are based on the hypothesis of horizontal layers but most real layers are not horizontal. Greater layer dip results in a greater difference between the observed CMP gathers and their real location. Second, conventional processing flows such as NMO, DMO, and deconvolution will distort amplitudes. Third, the formulation of reflection coefficient is related to incidence angles and it is difficult to get the relationship between amplitude and incidence angle. Wave equation prestack depth migration has the ability of imaging complex media and steeply dipping layers. It can reduce the errors of conventional processing and move amplitudes back to their real location. With true amplitude migration, common angle gathers abstraction, and AVO inversion, we suggest a method of AVO inversion from common shot gathers in order to reduce the effect of the above factors and improve the accuracy of AVO inversion.展开更多
The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the o...The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the oilfield at present since pre-stack inversion is always limited by poor seismic data quality and insufficient logging data.In this paper,based on amplitude preserved seismic data processing and rock-physics analysis,pre-stack inversion is employed to predict the caved carbonate reservoir in TZ45 area by seriously controlling the quality of inversion procedures.These procedures mainly include angle-gather conversion,partial stack,wavelet estimation,low-frequency model building and inversion residual analysis.The amplitude-preserved data processing method can achieve high quality data based on the principle that they are very consistent with the synthetics.Besides,the foundation of pre-stack inversion and reservoir prediction criterion can be established by the connection between reservoir property and seismic reflection through rock-physics analysis.Finally,the inversion result is consistent with drilling wells in most cases.It is concluded that integrated with amplitude-preserved processing and rock-physics,pre-stack inversion can be effectively applied in the caved carbonate reservoir prediction.展开更多
Considering Zoeppritz equations, reflections of PP and PS are only the function of ratios of density and velocity. So the inversion results will be the same if the ratios are the same but values of density, velocities...Considering Zoeppritz equations, reflections of PP and PS are only the function of ratios of density and velocity. So the inversion results will be the same if the ratios are the same but values of density, velocities of P- wave and S-wave are different without strict constraint. This paper makes efforts to explore nonlinear simultaneous PP and PS inversion with expectation to reduce the ambiguity of AVO analysis by utilizing the redundancy of multi-component AVO measurements. Accurate estimation of ratio parameters depends on independence of input data. There are only two independent AVO attributes for PP reflectivity （i.e. intercept and gradient） and two for PS reflectivity （i.e. pseudo-intercept and pseudo-gradient or extreme amplitude）, respectively. For individual PP and PS inversion, the values of least-squares objective function do not converge around a large neighborhood of chosen true model parameters. Fortunately for joint PP and PS inversion the values of the least-squares objective function show closed contours with single minima. Finally the power function fitting is used to provide a higher precision AVO attributes than traditional polynomial fitting. By using the four independent fitting attributes （two independent attributes for PP and PS respectively）, the inversion of four ratio parameters （velocities and densities） would be estimated with less errors than that in traditional method.展开更多
Seismic amplitude variation with offset(AVO) inversion is an important approach for quantitative prediction of rock elasticity,lithology and fluid properties.With Biot-Gassmann's poroelasticity,an improved statist...Seismic amplitude variation with offset(AVO) inversion is an important approach for quantitative prediction of rock elasticity,lithology and fluid properties.With Biot-Gassmann's poroelasticity,an improved statistical AVO inversion approach is proposed.To distinguish the influence of rock porosity and pore fluid modulus on AVO reflection coefficients,the AVO equation of reflection coefficients parameterized by porosity,rock-matrix moduli,density and fluid modulus is initially derived from Gassmann equation and critical porosity model.From the analysis of the influences of model parameters on the proposed AVO equation,rock porosity has the greatest influences,followed by rock-matrix moduli and density,and fluid modulus has the least influences among these model parameters.Furthermore,a statistical AVO stepwise inversion method is implemented to the simultaneous estimation of rock porosity,rock-matrix modulus,density and fluid modulus.Besides,the Laplace probability model and differential evolution,Markov chain Monte Carlo algorithm is utilized for the stochastic simulation within Bayesian framework.Models and field data examples demonstrate that the simultaneous optimizations of multiple Markov chains can achieve the efficient simulation of the posterior probability density distribution of model parameters,which is helpful for the uncertainty analysis of the inversion and sets a theoretical fundament for reservoir characterization and fluid discrimination.展开更多
We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sens...We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sensitivity analysis. The imaging matrix at a plane reflector between viscoelastic media can be determined in the frequency domain using linearized reflection coefficients through Born approximation. We quantitatively analyze the sensitivity by studying eigenvalues and eigenvectors of the imaging matrix. The results show that two linear combinations of petrophysical parameters can be determined from the multi-wave AVO inversion in the case of amplitude compensation. Multi-wave AVO contains the information of attenuation in the media. However, the sensitivity of multi-wave AVO inversion to attenuation is small.展开更多
Amplitude variations with offset or incident angle （AVO/AVA） inversion are typically combined with statistical methods, such as Bayesian inference or deterministic inversion. We propose a joint elastic inversion met...Amplitude variations with offset or incident angle （AVO/AVA） inversion are typically combined with statistical methods, such as Bayesian inference or deterministic inversion. We propose a joint elastic inversion method in the time and frequency domain based on Bayesian inversion theory to improve the resolution of the estimated P- and S-wave velocities and density. We initially construct the objective function using Bayesian inference by combining seismic data in the time and frequency domain. We use Cauchy and Gaussian probability distribution density functions to obtain the prior information for the model parameters and the likelihood function, respectively. We estimate the elastic parameters by solving the initial objective function with added model constraints to improve the inversion robustness. The results of the synthetic data suggest that the frequency spectra of the estimated parameters are wider than those obtained with conventional elastic inversion in the time domain. In addition, the proposed inversion approach offers stronger antinoising compared to the inversion approach in the frequency domain. Furthermore, results from synthetic examples with added Gaussian noise demonstrate the robustness of the proposed approach. From the real data, we infer that more model parameter details can be reproduced with the proposed joint elastic inversion.展开更多
The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth...The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth domain.It is difficult to estimate seismic wavelets directly from seismic data due to the nonstationarity of the data in the depth domain.We conduct a velocity transformation of seismic data to make the seismic data stationary and then apply the ridge regression method to estimate a constant seismic wavelet.The estimated constant seismic wavelet is constructed as a set of space-variant seismic wavelets dominated by velocities at different spatial locations.Incorporating the weighted superposition principle,a synthetic seismogram is generated by directly employing the space-variant seismic wavelets in the depth domain.An inversion workflow based on the model-driven method is developed in the depth domain by incorporating the nonlinear conjugate gradient algorithm,which avoids additional data conversions between the time and depth domains.The impedance inversions of the synthetic and field seismic data in the depth domain show good results,which demonstrates that seismic inversion in the depth domain is feasible.The approach provides an alternative for forward numerical analyses and elastic property inversions of depth-domain seismic data.It is advantageous for further studies concerning the stability,accuracy,and efficiency of seismic inversions in the depth domain.展开更多
裂缝型储层是一种含流体的裂缝-孔隙介质,其裂缝参数的定量表征对非常规油气藏的勘探与开发具有重要意义。然而,传统以振幅信息为主的储层预测方法存在局限性,难以全面揭示裂缝型储层的复杂特性。本文针对含饱和流体的正交裂缝型储层,...裂缝型储层是一种含流体的裂缝-孔隙介质,其裂缝参数的定量表征对非常规油气藏的勘探与开发具有重要意义。然而,传统以振幅信息为主的储层预测方法存在局限性,难以全面揭示裂缝型储层的复杂特性。本文针对含饱和流体的正交裂缝型储层,深入分析了含水平和垂直正交裂缝介质的速度频散与衰减特性,并采用各向异性反射率法模拟了单界面频散砂岩储层振幅随偏移距变化(amplitude variation with offset,AVO)的频变响应特征。在此基础上,构建了以水平和垂直正交裂缝模型响应为驱动的贝叶斯反演框架,实现了对裂缝型储层中孔隙度、裂缝密度及裂缝半径的多参数定量反演。研究结果表明,孔隙度、裂缝密度及裂缝半径对速度频散表现出高度敏感性,且在低频时PP波频变反射系数随频率和入射角发生显著变化,振幅随入射角的增大线性增加,揭示了裂缝参数对频变AVO响应有重要影响。反演结果表明,所提出的反演方法在不同裂缝参数条件下,后验概率分布都具有较高精度,尤其在小尺度裂缝型储层中,对裂缝半径预测表现出更好的适用性和可靠性。展开更多
Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid cha...Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid characterization. In this paper, starting with the exact Zoeppritz equation that relates P-and S-wave moduli, a coefficient that describes the reflections of P-and converted waves is established. This method effectively avoids error introduced by approximations or indirect calculations, thus improving the accuracy of the inversion results. Considering that the inversion problem is ill-posed and that the forward operator is nonlinear, prior constraints on the model parameters and modified low-frequency constraints are also introduced to the objective function to make the problem more tractable. This modified objective function is solved over many iterations to continuously optimize the background values of the velocity ratio, which increases the stability of the inversion process. Tests of various models show that the method effectively improves the accuracy and stability of extracting P and S-wave moduli from underdetermined data. This method can be applied to provide inferences for reservoir exploration and fluid extraction.展开更多
The model-driven inversion method and data-driven prediction method are eff ective to obtain velocity and density from seismic data.The former necessitates initial models and cannot provide high-resolution inverted pa...The model-driven inversion method and data-driven prediction method are eff ective to obtain velocity and density from seismic data.The former necessitates initial models and cannot provide high-resolution inverted parameters because it primarily employs medium-frequency information from seismic data.The latter can predict parameters with high resolution,but it require a signifi cant number of accurate training samples,which are typically in limited supply.To solve the problems mentioned for these two methods,we propose a model-data-driven AVO inversion method based on multiple objective functions.The proposed method implements network training,network optimization,and network inversion by using three independent objective functions.Tests on synthetic and fi eld data show that the proposed method can invert high-accuracy and high-resolution velocity and density with a few training samples.展开更多
Recently,the great potential of seismic dispersion attributes in oil and gas exploration has attracted extensive attention.The frequency-dependent amplitude versus offset(FAVO)technology,with dispersion gradient as a ...Recently,the great potential of seismic dispersion attributes in oil and gas exploration has attracted extensive attention.The frequency-dependent amplitude versus offset(FAVO)technology,with dispersion gradient as a hydrocarbon indicator,has developed rapidly.Based on the classical AVO theory,the technology works on the assumption that elastic parameters are frequency-dependent,and implements FAVO inversion using spectral decomposition methods,so that it can take dispersive effects into account and effectively overcome the limitations of the classical AVO.However,the factors that affect FAVO are complicated.To this end,we construct a unified equation for FAVO inversion by combining several Zoeppritz approximations.We study and compare two strategies respectively with(strategy 1)and without(strategy 2)velocity as inversion input data.Using theoretical models,we investigate the influence of various factors,such as the Zoeppritz approximation used,P-and S-wave velocity dispersion,inversion input data,the strong reflection caused by non-reservoir interfaces,and the noise level of the seismic data.Our results show that FAVO inversion based on different Zoeppritz approximations gives similar results.In addition,the inversion results of strategy 2 are generally equivalent to that of strategy 1,which means that strategy 2 can be used to obtain dispersion attributes even if the velocity is not available.We also found that the existence of non-reservoir strong reflection interface may cause significant false dispersion.Therefore,logging,geological,and other relevant data should be fully used to prevent this undesirable consequence.Both the P-and S-wave related dispersion obtained from FAVO can be used as good indicators of a hydrocarbon reservoir,but the P-wave dispersion is more reliable.In fact,due to the mutual coupling of P-and S-wave dispersion terms,the P-wave dispersion gradient inverted from PP reflection seismic data has a stronger hydrocarbon detection ability than the S-wave dispersion gradient.Moreover,there is little difference in using post-stack data or pre-stack angle gathers as inversion input when only the P-wave dispersion is desired.The real application examples further demonstrate that dispersion attributes can not only indicate the location of a hydrocarbon reservoir,but also,to a certain extent,reveal the physical properties of reservoirs.展开更多
基金support of China national key project 41904130 and key research project 041020080060.
文摘With the development of exploration of oil and gas resources,the requirements for seismic inversion results are getting more accurate.In particular,it is hoped that the distribution patterns of oil and gas reservoirs can be finely characterized,and the seismic inversion results can clearly characterize the location of stratigraphic boundaries and meet the needs of accurate geological description.Specifically,for pre-stack AVO inversion,it is required to be able to distinguish smaller geological targets in the depth or time domain,and clearly depict the vertical boundaries of the geological objects.In response to the above requirements,we introduce the preprocessing regularization of the adaptive edge-preserving smooth filter into the pre-stack AVO elastic parameter inversion to clearly invert the position of layer boundary and improve the accuracy of the inversion results.
基金supposed by the National Nature Science Foundation of China(Grant No.42304131)the Natural Science Foundation of Heilongjiang Province(Grant No.LH2023D012)+1 种基金the Heilongjiang Postdoctoral Fund(Grant No.LBH-Z22092)the Basic Research Fund for Universities in Xinjiang Uygur Autonomous Region(Grant No.XJEDU2023P166)。
文摘The brittleness index(BI)is crucial for predicting engineering sweet spots and designing fracturing operations in shale oil reservoir exploration and development.Seismic amplitude variation with offset(AVO)inversion is commonly used to obtain the BI.Traditionally,velocity,density,and other parameters are firstly inverted,and the BI is then calculated,which often leads to accumulated errors.Moreover,due to the limited of well-log data in field work areas,AVO inversion typically faces the challenge of limited information,resulting in not high accuracy of BI derived by existing AVO inversion methods.To address these issues,we first derive an AVO forward approximation equation that directly characterizes the BI in P-wave reflection coefficients.Based on this,an intelligent AVO inversion method,which combines the advantages of traditional and intelligent approaches,for directly obtaining the BI is proposed.A TransUnet model is constructed to establish the strong nonlinear mapping relationship between seismic data and the BI.By incorporating a combined objective function that is constrained by both low-frequency parameters and training samples,the challenge of limited samples is effectively addressed,and the direct inversion of the BI is stably achieved.Tests on model data and applications on field data demonstrate the feasibility,advancement,and practicality of the proposed method.
基金supported by Fundamental Research Funds for the Central Universities,CHD300102264715National Key Research and Development Program of China under Grant 2021YFA0716902Natural Science Basic Research Program of Shaanxi 2024JCYBMS-199。
文摘Young's modulus and Poisson's ratio are crucial parameters for reservoir characterization and rock brittleness evaluation.Conventional methods often rely on indirect computation or approximations of the Zoeppritz equations to estimate Young's modulus,which can introduce cumulative errors and reduce the accuracy of inversion results.To address these issues,this paper introduces the analytical solution of the Zoeppritz equation into the inversion process.The equation is re-derived and expressed in terms of Young's modulus,Poisson's ratio,and density.Within the Bayesian framework,we construct an objective function for the joint inversion of PP and PS waves.Traditional gradient-based algorithms often suffer from low precision and the computational complexity.In this study,we address limitations of conventional approaches related to low precision and complicated code by using Circle chaotic mapping,Levy flights,and Gaussian mutation to optimize the quantum particle swarm optimization(QPSO),named improved quantum particle swarm optimization(IQPSO).The IQPSO demonstrates superior global optimization capabilities.We test the proposed inversion method with both synthetic and field data.The test results demonstrate the proposed method's feasibility and effectiveness,indicating an improvement in inversion accuracy over traditional methods.
基金National 973 Key Basic Research Development Program (No.2005CB422104)SINOPEC's Scientific and Technological Development Program (No.P05063)
文摘Based on the empirical Gardner equation describing the relationship between density and compressional wave velocity, the converted wave reflection coefficient extrema attributes for AVO analysis are proposed and the relations between the extrema position and amplitude, average velocity ratio across the interface, and shear wave reflection coefficient are derived. The extrema position is a monotonically decreasing function of average velocity ratio, and the extrema amplitude is a function of average velocity ratio and shear wave reflection coefficient. For theoretical models, the average velocity ratio and shear wave reflection coefficient are inverted from the extrema position and amplitude obtained from fitting a power function to converted wave AVO curves. Shear wave reflection coefficient sections have clearer physical meaning than conventional converted wave stacked sections and establish the theoretical foundation for geological structural interpretation and event correlation. ＂The method of inverting average velocity ratio and shear wave reflection coefficient from the extrema position and amplitude obtained from fitting a power function is applied to real CCP gathers. The inverted average velocity ratios are consistent with those computed from compressional and shear wave well logs.
基金supported by the Natural Science Foundation of China (Grant Nos 40974066 and 40821062)the National Basic Research Program of China (Grant No. 2007CB209602)
文摘Multi-component exploration has many advantages over ordinary P-wave exploration. PP/PS joint AVO analysis and inversion are useful and powerful methods to discriminate between reservoir and non-productive lithology. In this paper, we derive a new PS-wave reflection coefficient approximation equation which is more accurate at larger incidence angles. The equation is simplified for small incidence angles, which makes AVO analysis clearer and easier for angles less than 30 degrees. Based on this approximation, a PP/PS joint inversion is introduced. A real data example shows that oil sands, brine sands and shales can be differentiated based on the P- to S-wave velocity ratio from the PP/PS joint inversion. Fluid factors and Poisson＇s ratio also indicate an anomaly in the target zone at the oil well location.
基金supported by the National High-Tech Research and Development Program of China(863 Program)(No.2008AA093001)
文摘Cauchy priori distribution-based Bayesian AVO reflectivity inversion may lead to sparse estimates that are sensitive to large reflectivities. For the inversion, the computation of the covariance matrix and regularized terms requires prior estimation of model parameters, which makes the iterative inversion weakly nonlinear. At the same time, the relations among the model parameters are assumed linear. Furthermore, the reflectivities, the results of the inversion, or the elastic parameters with cumulative error recovered by integrating reflectivities are not well suited for detecting hydrocarbons and fuids. In contrast, in Bayesian linear AVO inversion, the elastic parameters can be directly extracted from prestack seismic data without linear assumptions for the model parameters. Considering the advantages of the abovementioned methods, the Bayesian AVO reflectivity inversion process is modified and Cauchy distribution is explored as a prior probability distribution and the time-variant covariance is also considered. Finally, we propose a new method for the weakly nonlinear AVO waveform inversion. Furthermore, the linear assumptions are abandoned and elastic parameters, such as P-wave velocity, S-wave velocity, and density, can be directly recovered from seismic data especially for interfaces with large reflectivities. Numerical analysis demonstrates that all the elastic parameters can be estimated from prestack seismic data even when the signal-to-noise ratio of the seismic data is low.
基金supported by the Fundamental Research Funds for the Central Universities of China(No.2652017438)the National Science and Technology Major Project of China(No.2016ZX05003-003)
文摘Multiwave seismic technology promotes the application of joint PP–PS amplitude versus offset (AVO) inversion;however conventional joint PP–PS AVO inversioan is linear based on approximations of the Zoeppritz equations for multiple iterations. Therefore the inversion results of P-wave, S-wave velocity and density exhibit low precision in the faroffset;thus, the joint PP–PS AVO inversion is nonlinear. Herein, we propose a nonlinear joint inversion method based on exact Zoeppritz equations that combines improved Bayesian inference and a least squares support vector machine (LSSVM) to solve the nonlinear inversion problem. The initial parameters of Bayesian inference are optimized via particle swarm optimization (PSO). In improved Bayesian inference, the optimal parameter of the LSSVM is obtained by maximizing the posterior probability of the hyperparameters, thus improving the learning and generalization abilities of LSSVM. Then, an optimal nonlinear LSSVM model that defi nes the relationship between seismic refl ection amplitude and elastic parameters is established to improve the precision of the joint PP–PS AVO inversion. Further, the nonlinear problem of joint inversion can be solved through a single training of the nonlinear inversion model. The results of the synthetic data suggest that the precision of the estimated parameters is higher than that obtained via Bayesian linear inversion with PP-wave data and via approximations of the Zoeppritz equations. In addition, results using synthetic data with added noise show that the proposed method has superior anti-noising properties. Real-world application shows the feasibility and superiority of the proposed method, as compared with Bayesian linear inversion.
基金This project is sponsored by the "Pre-Cenozoic Marine Oil and Gas Resource Research around the Bohai Area" of the Knowledge Innovation Project of The Chinese Academy of Sciences (No. KZCX1-SW-18)
文摘Conventional AVO inversion utilizes the trace amplitudes of CMP gathers. There are three main factors affecting the accuracy of the inversion. First, CMP gathers are based on the hypothesis of horizontal layers but most real layers are not horizontal. Greater layer dip results in a greater difference between the observed CMP gathers and their real location. Second, conventional processing flows such as NMO, DMO, and deconvolution will distort amplitudes. Third, the formulation of reflection coefficient is related to incidence angles and it is difficult to get the relationship between amplitude and incidence angle. Wave equation prestack depth migration has the ability of imaging complex media and steeply dipping layers. It can reduce the errors of conventional processing and move amplitudes back to their real location. With true amplitude migration, common angle gathers abstraction, and AVO inversion, we suggest a method of AVO inversion from common shot gathers in order to reduce the effect of the above factors and improve the accuracy of AVO inversion.
基金supported by National Basic Research Program(2006CB202304)of Chinaco-supported by the National Basic Research Program of China(Grant No.2011CB201103)the National Science and Technology Major Project of China(Grant No.2011ZX05004003)
文摘The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the oilfield at present since pre-stack inversion is always limited by poor seismic data quality and insufficient logging data.In this paper,based on amplitude preserved seismic data processing and rock-physics analysis,pre-stack inversion is employed to predict the caved carbonate reservoir in TZ45 area by seriously controlling the quality of inversion procedures.These procedures mainly include angle-gather conversion,partial stack,wavelet estimation,low-frequency model building and inversion residual analysis.The amplitude-preserved data processing method can achieve high quality data based on the principle that they are very consistent with the synthetics.Besides,the foundation of pre-stack inversion and reservoir prediction criterion can be established by the connection between reservoir property and seismic reflection through rock-physics analysis.Finally,the inversion result is consistent with drilling wells in most cases.It is concluded that integrated with amplitude-preserved processing and rock-physics,pre-stack inversion can be effectively applied in the caved carbonate reservoir prediction.
基金funded by National 973 Basic Research Developments Program of China (No.2005CB422104)863 National High Technique Research Development Project of China (No.2007AA060505)National Natural Science Foundation of China (No.40839901)
文摘Considering Zoeppritz equations, reflections of PP and PS are only the function of ratios of density and velocity. So the inversion results will be the same if the ratios are the same but values of density, velocities of P- wave and S-wave are different without strict constraint. This paper makes efforts to explore nonlinear simultaneous PP and PS inversion with expectation to reduce the ambiguity of AVO analysis by utilizing the redundancy of multi-component AVO measurements. Accurate estimation of ratio parameters depends on independence of input data. There are only two independent AVO attributes for PP reflectivity （i.e. intercept and gradient） and two for PS reflectivity （i.e. pseudo-intercept and pseudo-gradient or extreme amplitude）, respectively. For individual PP and PS inversion, the values of least-squares objective function do not converge around a large neighborhood of chosen true model parameters. Fortunately for joint PP and PS inversion the values of the least-squares objective function show closed contours with single minima. Finally the power function fitting is used to provide a higher precision AVO attributes than traditional polynomial fitting. By using the four independent fitting attributes （two independent attributes for PP and PS respectively）, the inversion of four ratio parameters （velocities and densities） would be estimated with less errors than that in traditional method.
基金the sponsorship of National Grand Project for Science and Technology(2016ZX05024004,2017ZX05009001,2017ZX05032003)the Fundamental Research Funds for the Central Universities(20CX06036A)+1 种基金the Postdoctoral Applied Research Project of Qingdao(QDYY20190040)the Science Foundation from SINOPEC Key Laboratory of Geophysics(wtyjy-wx2019-01-04)。
文摘Seismic amplitude variation with offset(AVO) inversion is an important approach for quantitative prediction of rock elasticity,lithology and fluid properties.With Biot-Gassmann's poroelasticity,an improved statistical AVO inversion approach is proposed.To distinguish the influence of rock porosity and pore fluid modulus on AVO reflection coefficients,the AVO equation of reflection coefficients parameterized by porosity,rock-matrix moduli,density and fluid modulus is initially derived from Gassmann equation and critical porosity model.From the analysis of the influences of model parameters on the proposed AVO equation,rock porosity has the greatest influences,followed by rock-matrix moduli and density,and fluid modulus has the least influences among these model parameters.Furthermore,a statistical AVO stepwise inversion method is implemented to the simultaneous estimation of rock porosity,rock-matrix modulus,density and fluid modulus.Besides,the Laplace probability model and differential evolution,Markov chain Monte Carlo algorithm is utilized for the stochastic simulation within Bayesian framework.Models and field data examples demonstrate that the simultaneous optimizations of multiple Markov chains can achieve the efficient simulation of the posterior probability density distribution of model parameters,which is helpful for the uncertainty analysis of the inversion and sets a theoretical fundament for reservoir characterization and fluid discrimination.
基金The study is supported by National Project 863 (No. 820-05-02-03).
文摘We derive formulae of correction for multi-wave geometric spreading and absorption in layered viscoelastic media, this provides the theoretical foundation for true amplitude compensation of field data and for our sensitivity analysis. The imaging matrix at a plane reflector between viscoelastic media can be determined in the frequency domain using linearized reflection coefficients through Born approximation. We quantitatively analyze the sensitivity by studying eigenvalues and eigenvectors of the imaging matrix. The results show that two linear combinations of petrophysical parameters can be determined from the multi-wave AVO inversion in the case of amplitude compensation. Multi-wave AVO contains the information of attenuation in the media. However, the sensitivity of multi-wave AVO inversion to attenuation is small.
基金supported by the National Nature Science Foundation Project(Nos.41604101 and U1562215)the National Grand Project for Science and Technology(No.2016ZX05024-004)+2 种基金the Natural Science Foundation of Shandong(No.BS2014NJ005)Science Foundation from SINOPEC Key Laboratory of Geophysics(No.33550006-15-FW2099-0027)the Fundamental Research Funds for the Central Universities
文摘Amplitude variations with offset or incident angle （AVO/AVA） inversion are typically combined with statistical methods, such as Bayesian inference or deterministic inversion. We propose a joint elastic inversion method in the time and frequency domain based on Bayesian inversion theory to improve the resolution of the estimated P- and S-wave velocities and density. We initially construct the objective function using Bayesian inference by combining seismic data in the time and frequency domain. We use Cauchy and Gaussian probability distribution density functions to obtain the prior information for the model parameters and the likelihood function, respectively. We estimate the elastic parameters by solving the initial objective function with added model constraints to improve the inversion robustness. The results of the synthetic data suggest that the frequency spectra of the estimated parameters are wider than those obtained with conventional elastic inversion in the time domain. In addition, the proposed inversion approach offers stronger antinoising compared to the inversion approach in the frequency domain. Furthermore, results from synthetic examples with added Gaussian noise demonstrate the robustness of the proposed approach. From the real data, we infer that more model parameter details can be reproduced with the proposed joint elastic inversion.
基金supported by the National Natural Science Foundation of China(No.41574130,41874143 and 41374134)the National Science and Technology Major Project of China(No.2016ZX05014-001-009)the Sichuan Provincial Youth Science&Technology Innovative Research Group Fund(No.2016TD0023)
文摘The extensive application of pre-stack depth migration has produced huge volumes of seismic data,which allows for the possibility of developing seismic inversions of reservoir properties from seismic data in the depth domain.It is difficult to estimate seismic wavelets directly from seismic data due to the nonstationarity of the data in the depth domain.We conduct a velocity transformation of seismic data to make the seismic data stationary and then apply the ridge regression method to estimate a constant seismic wavelet.The estimated constant seismic wavelet is constructed as a set of space-variant seismic wavelets dominated by velocities at different spatial locations.Incorporating the weighted superposition principle,a synthetic seismogram is generated by directly employing the space-variant seismic wavelets in the depth domain.An inversion workflow based on the model-driven method is developed in the depth domain by incorporating the nonlinear conjugate gradient algorithm,which avoids additional data conversions between the time and depth domains.The impedance inversions of the synthetic and field seismic data in the depth domain show good results,which demonstrates that seismic inversion in the depth domain is feasible.The approach provides an alternative for forward numerical analyses and elastic property inversions of depth-domain seismic data.It is advantageous for further studies concerning the stability,accuracy,and efficiency of seismic inversions in the depth domain.
文摘裂缝型储层是一种含流体的裂缝-孔隙介质,其裂缝参数的定量表征对非常规油气藏的勘探与开发具有重要意义。然而,传统以振幅信息为主的储层预测方法存在局限性,难以全面揭示裂缝型储层的复杂特性。本文针对含饱和流体的正交裂缝型储层,深入分析了含水平和垂直正交裂缝介质的速度频散与衰减特性,并采用各向异性反射率法模拟了单界面频散砂岩储层振幅随偏移距变化(amplitude variation with offset,AVO)的频变响应特征。在此基础上,构建了以水平和垂直正交裂缝模型响应为驱动的贝叶斯反演框架,实现了对裂缝型储层中孔隙度、裂缝密度及裂缝半径的多参数定量反演。研究结果表明,孔隙度、裂缝密度及裂缝半径对速度频散表现出高度敏感性,且在低频时PP波频变反射系数随频率和入射角发生显著变化,振幅随入射角的增大线性增加,揭示了裂缝参数对频变AVO响应有重要影响。反演结果表明,所提出的反演方法在不同裂缝参数条件下,后验概率分布都具有较高精度,尤其在小尺度裂缝型储层中,对裂缝半径预测表现出更好的适用性和可靠性。
基金supported by the National Science and Technology Major Project(No.2016ZX05047-002-001)
文摘Joint PP–PS inversion offers better accuracy and resolution than conventional P-wave inversion. P-and S-wave elastic moduli determined through data inversions are key parameters for reservoir evaluation and fluid characterization. In this paper, starting with the exact Zoeppritz equation that relates P-and S-wave moduli, a coefficient that describes the reflections of P-and converted waves is established. This method effectively avoids error introduced by approximations or indirect calculations, thus improving the accuracy of the inversion results. Considering that the inversion problem is ill-posed and that the forward operator is nonlinear, prior constraints on the model parameters and modified low-frequency constraints are also introduced to the objective function to make the problem more tractable. This modified objective function is solved over many iterations to continuously optimize the background values of the velocity ratio, which increases the stability of the inversion process. Tests of various models show that the method effectively improves the accuracy and stability of extracting P and S-wave moduli from underdetermined data. This method can be applied to provide inferences for reservoir exploration and fluid extraction.
基金financially supported by the Important National Science and Technology Specific Project of China (Grant No. 2016ZX05047-002)
文摘The model-driven inversion method and data-driven prediction method are eff ective to obtain velocity and density from seismic data.The former necessitates initial models and cannot provide high-resolution inverted parameters because it primarily employs medium-frequency information from seismic data.The latter can predict parameters with high resolution,but it require a signifi cant number of accurate training samples,which are typically in limited supply.To solve the problems mentioned for these two methods,we propose a model-data-driven AVO inversion method based on multiple objective functions.The proposed method implements network training,network optimization,and network inversion by using three independent objective functions.Tests on synthetic and fi eld data show that the proposed method can invert high-accuracy and high-resolution velocity and density with a few training samples.
基金This work is supported by the National Natural Science Foundation of China(42304141,41574103 and 41974120)the Joint Funds of the National Natural Science Foundation of China(U20B2015).
文摘Recently,the great potential of seismic dispersion attributes in oil and gas exploration has attracted extensive attention.The frequency-dependent amplitude versus offset(FAVO)technology,with dispersion gradient as a hydrocarbon indicator,has developed rapidly.Based on the classical AVO theory,the technology works on the assumption that elastic parameters are frequency-dependent,and implements FAVO inversion using spectral decomposition methods,so that it can take dispersive effects into account and effectively overcome the limitations of the classical AVO.However,the factors that affect FAVO are complicated.To this end,we construct a unified equation for FAVO inversion by combining several Zoeppritz approximations.We study and compare two strategies respectively with(strategy 1)and without(strategy 2)velocity as inversion input data.Using theoretical models,we investigate the influence of various factors,such as the Zoeppritz approximation used,P-and S-wave velocity dispersion,inversion input data,the strong reflection caused by non-reservoir interfaces,and the noise level of the seismic data.Our results show that FAVO inversion based on different Zoeppritz approximations gives similar results.In addition,the inversion results of strategy 2 are generally equivalent to that of strategy 1,which means that strategy 2 can be used to obtain dispersion attributes even if the velocity is not available.We also found that the existence of non-reservoir strong reflection interface may cause significant false dispersion.Therefore,logging,geological,and other relevant data should be fully used to prevent this undesirable consequence.Both the P-and S-wave related dispersion obtained from FAVO can be used as good indicators of a hydrocarbon reservoir,but the P-wave dispersion is more reliable.In fact,due to the mutual coupling of P-and S-wave dispersion terms,the P-wave dispersion gradient inverted from PP reflection seismic data has a stronger hydrocarbon detection ability than the S-wave dispersion gradient.Moreover,there is little difference in using post-stack data or pre-stack angle gathers as inversion input when only the P-wave dispersion is desired.The real application examples further demonstrate that dispersion attributes can not only indicate the location of a hydrocarbon reservoir,but also,to a certain extent,reveal the physical properties of reservoirs.
