A new low power quasi adiabatic logic,complementary pass transistor adiabatic logic (CPAL),is presented.The CPAL circuit is driven by a new three phase power clock,and its non adiabatic loss on output loads can b...A new low power quasi adiabatic logic,complementary pass transistor adiabatic logic (CPAL),is presented.The CPAL circuit is driven by a new three phase power clock,and its non adiabatic loss on output loads can be effectively reduced by using complementary pass transistor logic and transmission gates.Furthermore,the minimization of the energy consumption can be obtained by choosing the optimal size of bootstrapped nMOS transistors,thus it has more efficient energy transfer and recovery.A three phase power supply generator with a small control logic circuit and a single inductor is proposed.An 8 bit adder based on CPAL is designed and verified.With MOSIS 0 25μm CMOS technology,the CPAL adder consumes only 35% of the dissipated energy of a 2N 2N2P adder and is about 50% of the dissipated energy of a PFAL adder for clock rates ranging from 50 to 200MHz.展开更多
A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscil...A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscillator phase noise, which is the main error source for microwave ranging systems, can be significantly attenuated. Further, since the range measurements are derived on the same satellite, the dual transponder ranging system does not need a time tagging system to synchronize the two satellites. In view of the lack of oscillator noise analysis on the dual transponder ranging model, a comprehensive analysis of oscillator noise effects on ranging accuracy is provided. First, the dual transponder ranging system is described with emphasis on the detailed analysis of oscillator noise on measurement precision. Then, a high-fidelity numerical simulation approach based on the power spectrum density of an actual ultra-stable oscillator is carried out in both frequency domain and time domain to support the presented theoretical analysis. The simulation results under different conditions are consistent with the proposed concepts, which makes the results reliable. Besides, the results demonstrate that a high level of accuracy can be achieved by using this oscillator noise cancelation-oriented ranging method.展开更多
On February 25, the Unit 1 of Ling’ao Nuclear Power Plant phase II underwent a 41-day-long hot functional test successfully with its major systems satisfying the requirements for
Power generating equipment supply contract for Huaneng Nantong Power Plant Phase Ⅱ project affiliated to Huaneng International Electric Power Stock Company Ltd. was signed at the People’s Great Hall on June 28, 1996...Power generating equipment supply contract for Huaneng Nantong Power Plant Phase Ⅱ project affiliated to Huaneng International Electric Power Stock Company Ltd. was signed at the People’s Great Hall on June 28, 1996, Shi Dazhen, Minister of Electric Power, Ye Qing, Vice-chairman of the State Planning Commission, Zhang Youcai, Vice Minister of Finance and展开更多
China and Canada have signed a project award agreement for the co-operation for the Qinshan Phase Ⅲ Candu nuclear power project, marking significant progress in commercial negotiations between both countries on the c...China and Canada have signed a project award agreement for the co-operation for the Qinshan Phase Ⅲ Candu nuclear power project, marking significant progress in commercial negotiations between both countries on the construction of two 700 megawatt class Candu units. The agreement, signed between the China National Nuclear Corp (CNNC) and the Atomic Energy of Canada Ltd (AECL) in Beijing on July 12, finalized the price and commercial terms for Qinshan Phase展开更多
The main objective of this research work is to develop a simple state estimation calculator in LabView for three phase power system network. LabView based state estimation calculator has been chosen as the main platfo...The main objective of this research work is to develop a simple state estimation calculator in LabView for three phase power system network. LabView based state estimation calculator has been chosen as the main platform because it is a user friendly and easy to apply in power systems. This research work is intended to simultaneously acclimate the power system engineers with the utilization of LabView with electrical power systems. This proposed work will discuss about the configuration and the improvement of the intelligent instructional VI （virtual instrument） modules in power systems for state estimation solutions. In the proposed model state estimation has been carried out and model has been developed such that it can accommodate the latest versions of state estimation algorithm.展开更多
China and Canada nailed down a deal to build the third phase of the Qinshan Nuclear Power Plant in Zhejiang Province in East China on Nov. 26, 1996. The contract was signed in Shanghai by China National Nuclear Corp (...China and Canada nailed down a deal to build the third phase of the Qinshan Nuclear Power Plant in Zhejiang Province in East China on Nov. 26, 1996. The contract was signed in Shanghai by China National Nuclear Corp (CNNC) and Atomic Energy of Canada Ltd(AECL). AECL will construct two 700 MW heavy water reactors for the Chinese nuclear power plant.展开更多
An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,us...An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,used in the DSCRL adiabatic circuit.Although the 4 phase power clock is simpler,the DSCRL adiabatic circuit still shows good performance and high efficiency of energy transfer and recovery.This conclusion has been proved by the result of the HSPICE simulation using the 0 6μm CMOS technology.展开更多
In this study,a novel series of chiral 1,2-propanediol derivatives with different electron-donating and electron-withdrawing groups were synthesized and characterized by FT-IR and ~1H NMR.The helical twisting properti...In this study,a novel series of chiral 1,2-propanediol derivatives with different electron-donating and electron-withdrawing groups were synthesized and characterized by FT-IR and ~1H NMR.The helical twisting properties of all the chiral dopants were investigated by doping the chiral dopants into a nematic liquid crystal host（SLC-1717）.The results indicate that the donor-acceptor electron effect have a prominent influence on helical twisting property of the chiral nematic phase induced by the chiral dopants. Introducing electron-withdrawing groups into the terminal ends of chiral 1,2-propanediol can decrease the absolute values of the helical twisting power.In addition,the helix inversion temperatures of the induced chiral nematic phase are variational with the change of terminal groups.展开更多
In this study,the magnetic field was lessened by mirror array power cable system,and simulation of results predicted the best permutations to decrease electromagnetic influence(EMI)value below 0.4 mG at working space ...In this study,the magnetic field was lessened by mirror array power cable system,and simulation of results predicted the best permutations to decrease electromagnetic influence(EMI)value below 0.4 mG at working space without any shielding.Furthermore,this innovative method will cost down at high technology nano-Fab especially for 28 nanometer process.Through the theoretical study and numerical simulation,we predict the best permutation for mitigating EMI noise from three-phase electric power lines system without any shielding system down to 1.2 mG in 3.0 m distance from applying I=50 A at 60 Hz with 12 series cable tray system.Followed above discussions,this study indicated different and new perspectives with before opinions of some researcher.The measured magnetic field values on the nano-Fab are in good agreement with this simulation results.These good results give more confident to apply in new building nano-Fab system.Furthermore,this innovation will cost down for EMI shielding at high technology nano-Fab especially for 40(and below)nanometer process.展开更多
A speaker driver applied to class G/classⅠwith a single phase power supply is presented.Gain expanding and compressing technology are employed in the signal processing circuit to optimize power dissipation.The circui...A speaker driver applied to class G/classⅠwith a single phase power supply is presented.Gain expanding and compressing technology are employed in the signal processing circuit to optimize power dissipation.The circuit is implemented in 0.18μm N-well CMOS.Experimental results show that the speaker driver has a good audio sound quality and power efficiency.Less than 0.006%THD at a low power range and less than 0.4%at a medium power range can be obtained with a 1 kHz sine wave signal.Maximum output power of 360 mW can be gained at a load of 8Ω.The power efficiency is about twice that of a traditional class AB driver at the power range of 80 mW and shows more than 18%improvement at the higher output power range.展开更多
A novel controller is proposed to regulate the DC-link voltage of a single phase active power filter （SPAPF）. The proposed switched fractional controller （SFC） consists of a conventional PI controller, a fractiona...A novel controller is proposed to regulate the DC-link voltage of a single phase active power filter （SPAPF）. The proposed switched fractional controller （SFC） consists of a conventional PI controller, a fractional order PI （FO-PI） controller and a decision maker that switches between them. Commonly, the conventional PI controller is used in regulation loops due to its advantages in steady-state but it is limited in transient state. On the other hand, the FO-PI controller overcomes these draw- backs but it causes dramatic degradation in control performances in steady-state because of the fractional calculus theory and the approximation method used to implement this kind of controller. Thus, the purpose of this paper is to switch to the PI controller in steady-state to obtain the best power quality and to switch to the FO-PI controller when external disturbances are detected to guarantee a fast transient state. To investigate the efficiency and accuracy of the SFC considering all robustness tests, an experimental setup has been established. The results of the SFC fulfill the requirements, confirm its high performances in steady and transient states and demon- strate its feasibility and effectiveness. The experiment results have satisfied the limit specified by the IEEE harmonic standard 519.展开更多
This paper presents an algorithm that can adaptively select the intermediate frequency（IF） and compensate the IQ mismatch according to the power ratio of the adjacent channel interference to the desired signal in a ...This paper presents an algorithm that can adaptively select the intermediate frequency（IF） and compensate the IQ mismatch according to the power ratio of the adjacent channel interference to the desired signal in a low-IF GSM receiver.The IF can be adaptively selected between 100 and 130 kHz.Test result shows an improvement of phase error from 6.78°to 3.23°.Also a least mean squares（LMS） based IQ mismatch compensation algorithm is applied to improve image rejection ratio（IRR） for the desired signal along with strong adjacent channel interference.The IRR is improved from 29.1 to 44.3 dB in measurement.The design is verified in a low-IF GSM receiver fabricated in SMIC 0.13μm RF CMOS process with a working voltage of 1.2 V.展开更多
A novel voltage-controlled oscillator（VCO） topology with low voltage and low power is presented. It employed the inductive-biasing to build a feedback path between the tank and the MOS gate to enhance the voltage ga...A novel voltage-controlled oscillator（VCO） topology with low voltage and low power is presented. It employed the inductive-biasing to build a feedback path between the tank and the MOS gate to enhance the voltage gain from output nodes of the tank to the gate node of the cross-coupled transistor. Theoretical analysis using timevarying phase noise theory derives closed-form symbolic formulas for the 1/f^2 phase noise region, showing that this feedback path could improve the phase noise performance. The proposed VCO is fabricated in TSMC 0.13 m CMOS technology. Working under a 0.3 V supply voltage with 1.2 m W power consumption, the measured phase noise of the VCO is –119.4 d Bc/Hz at 1 MHz offset frequency from the carrier of 4.92 GHz, resulting in an Fo M of 192.5 d Bc/Hz.展开更多
文摘A new low power quasi adiabatic logic,complementary pass transistor adiabatic logic (CPAL),is presented.The CPAL circuit is driven by a new three phase power clock,and its non adiabatic loss on output loads can be effectively reduced by using complementary pass transistor logic and transmission gates.Furthermore,the minimization of the energy consumption can be obtained by choosing the optimal size of bootstrapped nMOS transistors,thus it has more efficient energy transfer and recovery.A three phase power supply generator with a small control logic circuit and a single inductor is proposed.An 8 bit adder based on CPAL is designed and verified.With MOSIS 0 25μm CMOS technology,the CPAL adder consumes only 35% of the dissipated energy of a 2N 2N2P adder and is about 50% of the dissipated energy of a PFAL adder for clock rates ranging from 50 to 200MHz.
基金Project(61106113)supported by the National Natural Science Foundation of China
文摘A dual transponder carrier ranging method can be used to measure inter-satellite distance with high precision by combining the reference and the to-and-fro measurements. Based on the differential techniques, the oscillator phase noise, which is the main error source for microwave ranging systems, can be significantly attenuated. Further, since the range measurements are derived on the same satellite, the dual transponder ranging system does not need a time tagging system to synchronize the two satellites. In view of the lack of oscillator noise analysis on the dual transponder ranging model, a comprehensive analysis of oscillator noise effects on ranging accuracy is provided. First, the dual transponder ranging system is described with emphasis on the detailed analysis of oscillator noise on measurement precision. Then, a high-fidelity numerical simulation approach based on the power spectrum density of an actual ultra-stable oscillator is carried out in both frequency domain and time domain to support the presented theoretical analysis. The simulation results under different conditions are consistent with the proposed concepts, which makes the results reliable. Besides, the results demonstrate that a high level of accuracy can be achieved by using this oscillator noise cancelation-oriented ranging method.
文摘On February 25, the Unit 1 of Ling’ao Nuclear Power Plant phase II underwent a 41-day-long hot functional test successfully with its major systems satisfying the requirements for
文摘Power generating equipment supply contract for Huaneng Nantong Power Plant Phase Ⅱ project affiliated to Huaneng International Electric Power Stock Company Ltd. was signed at the People’s Great Hall on June 28, 1996, Shi Dazhen, Minister of Electric Power, Ye Qing, Vice-chairman of the State Planning Commission, Zhang Youcai, Vice Minister of Finance and
文摘China and Canada have signed a project award agreement for the co-operation for the Qinshan Phase Ⅲ Candu nuclear power project, marking significant progress in commercial negotiations between both countries on the construction of two 700 megawatt class Candu units. The agreement, signed between the China National Nuclear Corp (CNNC) and the Atomic Energy of Canada Ltd (AECL) in Beijing on July 12, finalized the price and commercial terms for Qinshan Phase
文摘The main objective of this research work is to develop a simple state estimation calculator in LabView for three phase power system network. LabView based state estimation calculator has been chosen as the main platform because it is a user friendly and easy to apply in power systems. This research work is intended to simultaneously acclimate the power system engineers with the utilization of LabView with electrical power systems. This proposed work will discuss about the configuration and the improvement of the intelligent instructional VI （virtual instrument） modules in power systems for state estimation solutions. In the proposed model state estimation has been carried out and model has been developed such that it can accommodate the latest versions of state estimation algorithm.
文摘China and Canada nailed down a deal to build the third phase of the Qinshan Nuclear Power Plant in Zhejiang Province in East China on Nov. 26, 1996. The contract was signed in Shanghai by China National Nuclear Corp (CNNC) and Atomic Energy of Canada Ltd(AECL). AECL will construct two 700 MW heavy water reactors for the Chinese nuclear power plant.
文摘An asymmetry power clock,4 phase power clock supplying the power to the DSCRL(dual swing charge recovery logic) adiabatic circuit is presented.It is much simpler than the 6 phase power clock,symmetry power clock,used in the DSCRL adiabatic circuit.Although the 4 phase power clock is simpler,the DSCRL adiabatic circuit still shows good performance and high efficiency of energy transfer and recovery.This conclusion has been proved by the result of the HSPICE simulation using the 0 6μm CMOS technology.
基金supported in part by the National Natural Science Foundation of China(No.51173155)the Hebei Province Science Foundation of China(No.E2010001182)
文摘In this study,a novel series of chiral 1,2-propanediol derivatives with different electron-donating and electron-withdrawing groups were synthesized and characterized by FT-IR and ~1H NMR.The helical twisting properties of all the chiral dopants were investigated by doping the chiral dopants into a nematic liquid crystal host（SLC-1717）.The results indicate that the donor-acceptor electron effect have a prominent influence on helical twisting property of the chiral nematic phase induced by the chiral dopants. Introducing electron-withdrawing groups into the terminal ends of chiral 1,2-propanediol can decrease the absolute values of the helical twisting power.In addition,the helix inversion temperatures of the induced chiral nematic phase are variational with the change of terminal groups.
文摘In this study,the magnetic field was lessened by mirror array power cable system,and simulation of results predicted the best permutations to decrease electromagnetic influence(EMI)value below 0.4 mG at working space without any shielding.Furthermore,this innovative method will cost down at high technology nano-Fab especially for 28 nanometer process.Through the theoretical study and numerical simulation,we predict the best permutation for mitigating EMI noise from three-phase electric power lines system without any shielding system down to 1.2 mG in 3.0 m distance from applying I=50 A at 60 Hz with 12 series cable tray system.Followed above discussions,this study indicated different and new perspectives with before opinions of some researcher.The measured magnetic field values on the nano-Fab are in good agreement with this simulation results.These good results give more confident to apply in new building nano-Fab system.Furthermore,this innovation will cost down for EMI shielding at high technology nano-Fab especially for 40(and below)nanometer process.
文摘A speaker driver applied to class G/classⅠwith a single phase power supply is presented.Gain expanding and compressing technology are employed in the signal processing circuit to optimize power dissipation.The circuit is implemented in 0.18μm N-well CMOS.Experimental results show that the speaker driver has a good audio sound quality and power efficiency.Less than 0.006%THD at a low power range and less than 0.4%at a medium power range can be obtained with a 1 kHz sine wave signal.Maximum output power of 360 mW can be gained at a load of 8Ω.The power efficiency is about twice that of a traditional class AB driver at the power range of 80 mW and shows more than 18%improvement at the higher output power range.
文摘A novel controller is proposed to regulate the DC-link voltage of a single phase active power filter （SPAPF）. The proposed switched fractional controller （SFC） consists of a conventional PI controller, a fractional order PI （FO-PI） controller and a decision maker that switches between them. Commonly, the conventional PI controller is used in regulation loops due to its advantages in steady-state but it is limited in transient state. On the other hand, the FO-PI controller overcomes these draw- backs but it causes dramatic degradation in control performances in steady-state because of the fractional calculus theory and the approximation method used to implement this kind of controller. Thus, the purpose of this paper is to switch to the PI controller in steady-state to obtain the best power quality and to switch to the FO-PI controller when external disturbances are detected to guarantee a fast transient state. To investigate the efficiency and accuracy of the SFC considering all robustness tests, an experimental setup has been established. The results of the SFC fulfill the requirements, confirm its high performances in steady and transient states and demon- strate its feasibility and effectiveness. The experiment results have satisfied the limit specified by the IEEE harmonic standard 519.
基金supported by the Important National Science and Technology Specific Projects of China(No.2009ZX01031-003-002)the National High Technology Research and Development Program of China(No.2009AA011605)the National Natural Science Foundation of China(No.61076028)
文摘This paper presents an algorithm that can adaptively select the intermediate frequency（IF） and compensate the IQ mismatch according to the power ratio of the adjacent channel interference to the desired signal in a low-IF GSM receiver.The IF can be adaptively selected between 100 and 130 kHz.Test result shows an improvement of phase error from 6.78°to 3.23°.Also a least mean squares（LMS） based IQ mismatch compensation algorithm is applied to improve image rejection ratio（IRR） for the desired signal along with strong adjacent channel interference.The IRR is improved from 29.1 to 44.3 dB in measurement.The design is verified in a low-IF GSM receiver fabricated in SMIC 0.13μm RF CMOS process with a working voltage of 1.2 V.
基金Project supported by the National Science and Technology Major Project of China(No.2011ZX03004-002-01)
文摘A novel voltage-controlled oscillator（VCO） topology with low voltage and low power is presented. It employed the inductive-biasing to build a feedback path between the tank and the MOS gate to enhance the voltage gain from output nodes of the tank to the gate node of the cross-coupled transistor. Theoretical analysis using timevarying phase noise theory derives closed-form symbolic formulas for the 1/f^2 phase noise region, showing that this feedback path could improve the phase noise performance. The proposed VCO is fabricated in TSMC 0.13 m CMOS technology. Working under a 0.3 V supply voltage with 1.2 m W power consumption, the measured phase noise of the VCO is –119.4 d Bc/Hz at 1 MHz offset frequency from the carrier of 4.92 GHz, resulting in an Fo M of 192.5 d Bc/Hz.
