In order to understand the mechanism of the confinement bifurcation and H-mode power threshold in magnetically confined plasma,a new dynamical model of the L-H transition based on edge instability phase transition（E...In order to understand the mechanism of the confinement bifurcation and H-mode power threshold in magnetically confined plasma,a new dynamical model of the L-H transition based on edge instability phase transition（EIPT） has been developed.With the typical plasma parameters of the EAST tokamak,the self-consistent turbulence growth rate is analyzed using the simplest case of pressure-driven ballooning-type instability,which indicates that the L-H transition can be caused by the stabilization of the edge instability through EIPT.The weak E？×？B flow shear in L-mode is able to increase the ion inertia of the electrostatic motion by increasing the radial wave number of the tilted turbulence structures,which play an important role for accelerating the trigger process of EIPT rather than directly to suppress the turbulent transport.With the acceleration mechanism of E？×？B flow shear,fast L-H and H-L transitions are demonstrated under the control of the input heating power.Due to the simplified scrape-offlayer boundary condition applied,the ratio between the heating powers at the H-L and L-H transition respectively differs from the ratio by Nusselt number.The results of the modeling reveal a scaling of the power threshold of the L-H transition,P_（L-H）？∝？n^（0.76） B^（0.8） for deuterium plasma.It is found finite Larmor radius induces an isotope effect of the H-mode power threshold.展开更多
The rate equations,which is suitable to erbium-doped fiber lasers pumped at 980 nm and 1 480nm wavelengths respectively,are investigated,and analytical expressions of the threshold pump powers under two pump wavelengt...The rate equations,which is suitable to erbium-doped fiber lasers pumped at 980 nm and 1 480nm wavelengths respectively,are investigated,and analytical expressions of the threshold pump powers under two pump wavelengths are derived.As a result,some important parameters can be quantitatively specified.展开更多
We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the thre...We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.展开更多
The calculation time in the Monte Carlo simulations consistently represents an essential issue. It is often very long, and its decrease constitutes a challenge for the simulator. Generally, an MC simulation is qualifi...The calculation time in the Monte Carlo simulations consistently represents an essential issue. It is often very long, and its decrease constitutes a challenge for the simulator. Generally, an MC simulation is qualified as quality or not according to two main criteria: the calculation time and the accuracy of the results. However, in most cases, the optimization of one criterion affects negatively the other. Therefore, a compromise between both of them is always required in this kind of simulation. The present work aims at studying the impact of the production threshold(or cut) of the GEANT4 toolkit on the calculation of the power deposition in the MEGAPIE spallation target.The production threshold of secondaries is a GEANT4 intrinsic parameter. It indicates the limit of energy we can reach in the production of secondary particles. This study has allowed us to make the following conclusions. First,the influence of the cut on the calculation of the deposited power depends on the volume size, its arrangement and the importance of the electromagnetic processes occurring within. Second, the accuracy of the calculations can be acceptable only below a given value of the cut energy.Third, this accuracy remains almost unchangeable from a certain value of the cut. The study has also made it possible to explore the prevalence of certain interactions in the zone of spallation in the MEGAPIE target.展开更多
Ultrasound is used in various chemical reaction processes, and these reactions are influenced by ultrasonic frequency. A threshold power is required for the ultrasonic degradation reaction and oxidation reaction cause...Ultrasound is used in various chemical reaction processes, and these reactions are influenced by ultrasonic frequency. A threshold power is required for the ultrasonic degradation reaction and oxidation reaction caused by hydroxyl radicals, and the cavitation threshold power is also influenced by frequency generally. In this study, the effects of frequency on the threshold power of methylene blue degradation and KI oxidation were investigated in the range between 22.8 kHz and 1640 kHz. The threshold power of KI oxidation reaction increased with increasing frequency. This phenomenon well agrees with previous study, and it is revealed that the generation of I-3?ion is caused by oxidation reaction of Iˉ ions with hydroxyl radicals. On the other hand, the threshold power of methylene blue degradation reaction was not affected by frequency. The ultrasonic degradation of methylene blue is considered to be caused by hydroxyl radicals, and there is a linear relationship between degradation rate constant and sonochemical efficiency value. However, it is guessed that the degradation of methylene blue is occurred inside cavitation bubble by pyrolysis at high frequency regions.展开更多
基金supported by National Natural Science Foundation of China under Contract Nos.11575235 and 11422546China Postdoctoral Science Foundation under Contract No.2016M602043+2 种基金the National Magnetic Confinement Fusion Science Program of China under Contract No.2015GB101002Key Research Program of Frontier Sciences,CAS,Grant No.QYZDB-SSW-SLH001K C Wong Education Foundation
文摘In order to understand the mechanism of the confinement bifurcation and H-mode power threshold in magnetically confined plasma,a new dynamical model of the L-H transition based on edge instability phase transition（EIPT） has been developed.With the typical plasma parameters of the EAST tokamak,the self-consistent turbulence growth rate is analyzed using the simplest case of pressure-driven ballooning-type instability,which indicates that the L-H transition can be caused by the stabilization of the edge instability through EIPT.The weak E？×？B flow shear in L-mode is able to increase the ion inertia of the electrostatic motion by increasing the radial wave number of the tilted turbulence structures,which play an important role for accelerating the trigger process of EIPT rather than directly to suppress the turbulent transport.With the acceleration mechanism of E？×？B flow shear,fast L-H and H-L transitions are demonstrated under the control of the input heating power.Due to the simplified scrape-offlayer boundary condition applied,the ratio between the heating powers at the H-L and L-H transition respectively differs from the ratio by Nusselt number.The results of the modeling reveal a scaling of the power threshold of the L-H transition,P_（L-H）？∝？n^（0.76） B^（0.8） for deuterium plasma.It is found finite Larmor radius induces an isotope effect of the H-mode power threshold.
文摘The rate equations,which is suitable to erbium-doped fiber lasers pumped at 980 nm and 1 480nm wavelengths respectively,are investigated,and analytical expressions of the threshold pump powers under two pump wavelengths are derived.As a result,some important parameters can be quantitatively specified.
基金Supported by the National Basic Research Program of China under Grant Nos 2013CB632801 and 2013CB632803the National Natural Science Foundation of China under Grant Nos 61435014,61306058 and 61274094the Beijing Natural Science Foundation under Grant No 4144086
文摘We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.
文摘The calculation time in the Monte Carlo simulations consistently represents an essential issue. It is often very long, and its decrease constitutes a challenge for the simulator. Generally, an MC simulation is qualified as quality or not according to two main criteria: the calculation time and the accuracy of the results. However, in most cases, the optimization of one criterion affects negatively the other. Therefore, a compromise between both of them is always required in this kind of simulation. The present work aims at studying the impact of the production threshold(or cut) of the GEANT4 toolkit on the calculation of the power deposition in the MEGAPIE spallation target.The production threshold of secondaries is a GEANT4 intrinsic parameter. It indicates the limit of energy we can reach in the production of secondary particles. This study has allowed us to make the following conclusions. First,the influence of the cut on the calculation of the deposited power depends on the volume size, its arrangement and the importance of the electromagnetic processes occurring within. Second, the accuracy of the calculations can be acceptable only below a given value of the cut energy.Third, this accuracy remains almost unchangeable from a certain value of the cut. The study has also made it possible to explore the prevalence of certain interactions in the zone of spallation in the MEGAPIE target.
文摘Ultrasound is used in various chemical reaction processes, and these reactions are influenced by ultrasonic frequency. A threshold power is required for the ultrasonic degradation reaction and oxidation reaction caused by hydroxyl radicals, and the cavitation threshold power is also influenced by frequency generally. In this study, the effects of frequency on the threshold power of methylene blue degradation and KI oxidation were investigated in the range between 22.8 kHz and 1640 kHz. The threshold power of KI oxidation reaction increased with increasing frequency. This phenomenon well agrees with previous study, and it is revealed that the generation of I-3?ion is caused by oxidation reaction of Iˉ ions with hydroxyl radicals. On the other hand, the threshold power of methylene blue degradation reaction was not affected by frequency. The ultrasonic degradation of methylene blue is considered to be caused by hydroxyl radicals, and there is a linear relationship between degradation rate constant and sonochemical efficiency value. However, it is guessed that the degradation of methylene blue is occurred inside cavitation bubble by pyrolysis at high frequency regions.
