Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment an...Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment and production.In this study,a 3-D finite element (FE) method based on experimental verification was applied to calculate the magnetic flux density (Bz).The effects of the power parameters and the induction coil on the magnetic field distribution in the cold crucible were investigated.The results show that higher current intensity and lower frequency are beneficial to the increase of Bz at both the segment midpoint and the slit location.The induction coil with racetrack section can induce greater Bz,and a larger gap between the induction coil and the shield ring increases Bz.The mechanism for this effect is also discussed.展开更多
In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the drivi...In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the driving motor and power battery of the key components of the vehicle were reasonably selected.Cruise software was used to simulate the loading process of the vehicle.The results show that the performance design of the power system of the electric transport vehicle and its key components is reasonable,meeting the requirements of maximum speed,climbing performance and starting driving performance,and providing a reference and credible basis for the design of the power system of the vehicle.展开更多
In generator design field,waveform total harmonic distortion(THD)and telephone harmonic factor(THF)are parameters commonly used to measure the impact of generator no-load voltage harmonics on the power communication q...In generator design field,waveform total harmonic distortion(THD)and telephone harmonic factor(THF)are parameters commonly used to measure the impact of generator no-load voltage harmonics on the power communication quality.Tubular hydrogenerators are considered the optimal generator for exploiting low-head,high-flow hydro resources,and they have seen increasingly widespread application in China's power systems recent years.However,owing to the compact and constrained internal space of such generators,their internal magnetic-field harmonics are pronounced.Therefore,accurate calculation of their THD and THF is crucial during the analysis and design stages to ensure the quality of power communication.Especially in the electromagnetic field finite element modeling analysis of such generators,the type and order of the finite element meshes may have a significant impact on the THD and THF calculation results,which warrants in-depth research.To address this,this study takes a real 34 MW large tubular hydrogenerator as an example,and establishes its electromagnetic field finite element model under no-load conditions.Two types of meshes,five mesh densities,and two mesh orders are analyzed to reveal the effect of electromagnetic field finite element mesh types and orders on the calculation results of THD and THF for such generators.展开更多
A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a dr...A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.展开更多
A numerical model of thermoelectric module （TEM） is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyz...A numerical model of thermoelectric module （TEM） is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyzed by the MATLAB numerical calculation.The numerical model is validated by the ANSYS thermal,electrical,and structural coupling simulation.The effects of the variable physical property parameters and contact effect on the output power and thermoelectric efficiency are evaluated,and the concept of aspect ratio optimal domain is proposed,which provides a new design approach for the TEM.展开更多
随着大量新能源场站接入交直流混联电网,系统的静态电压稳定裕度(static voltage stability margin,SVSM)水平具有很大的不确定性,需要研究考虑新能源场站高阶不确定性的交直流混联电网SVSM计算方法。针对此问题,首先建立了交直流混联电...随着大量新能源场站接入交直流混联电网,系统的静态电压稳定裕度(static voltage stability margin,SVSM)水平具有很大的不确定性,需要研究考虑新能源场站高阶不确定性的交直流混联电网SVSM计算方法。针对此问题,首先建立了交直流混联电网SVSM计算模型,模型中考虑了直流换流站控制方式随负荷增长的切换;采用概率盒模型描述风速与光照强度的随机波动,提出了改进区间半不变量法以获得更准确的SVSM概率盒,该方法通过K-means++聚类算法将随机变量样本划分为多个波动范围较小的样本集,以降低半不变量的线性化计算带来的误差;并结合Gram-Charlier级数展开和概率加权和计算得到考虑新能源场站高阶不确定性的系统SVSM概率盒。通过对修改的IEEE-39节点交直流系统和南方电网两个算例的分析,并与区间半不变量法和双层蒙特卡洛法比较,验证了所提出方法获得的SVSM概率盒具有较高的计算精度和效率。展开更多
BIM(建筑信息模型)技术的发展使建筑领域产生了第二次变革,但BIM技术在地下输电工程的结构设计中应用较少。基于国家电网项目中即墨站220 k V地下输电工程,以输电网中的工作井为研究对象,在BIM建模软件Revit中建立了工作井模型族库,实...BIM(建筑信息模型)技术的发展使建筑领域产生了第二次变革,但BIM技术在地下输电工程的结构设计中应用较少。基于国家电网项目中即墨站220 k V地下输电工程,以输电网中的工作井为研究对象,在BIM建模软件Revit中建立了工作井模型族库,实现参数化建立工作井的BIM模型,并将模型导入结构分析软件Robot中进行计算分析。该项目实现了工作井设计及计算的批量化操作,提高了设计人员的工作效率。展开更多
基金financially supported by the National Basic Research Program of China (Grant No.2011CB605504)
文摘Bottomless electromagnetic cold crucible is a new apparatus for continuous melting and directional solidification;however,improving its power efficiency and optimizing the configuration are important for experiment and production.In this study,a 3-D finite element (FE) method based on experimental verification was applied to calculate the magnetic flux density (Bz).The effects of the power parameters and the induction coil on the magnetic field distribution in the cold crucible were investigated.The results show that higher current intensity and lower frequency are beneficial to the increase of Bz at both the segment midpoint and the slit location.The induction coil with racetrack section can induce greater Bz,and a larger gap between the induction coil and the shield ring increases Bz.The mechanism for this effect is also discussed.
文摘In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the driving motor and power battery of the key components of the vehicle were reasonably selected.Cruise software was used to simulate the loading process of the vehicle.The results show that the performance design of the power system of the electric transport vehicle and its key components is reasonable,meeting the requirements of maximum speed,climbing performance and starting driving performance,and providing a reference and credible basis for the design of the power system of the vehicle.
基金sponsored by the National Natural Science Foundation,Youth Foundation of China,Grant/Award Number:51607146Sichuan Natural Sciences Fund,Grant/Award Number:2023NSFSC0295。
文摘In generator design field,waveform total harmonic distortion(THD)and telephone harmonic factor(THF)are parameters commonly used to measure the impact of generator no-load voltage harmonics on the power communication quality.Tubular hydrogenerators are considered the optimal generator for exploiting low-head,high-flow hydro resources,and they have seen increasingly widespread application in China's power systems recent years.However,owing to the compact and constrained internal space of such generators,their internal magnetic-field harmonics are pronounced.Therefore,accurate calculation of their THD and THF is crucial during the analysis and design stages to ensure the quality of power communication.Especially in the electromagnetic field finite element modeling analysis of such generators,the type and order of the finite element meshes may have a significant impact on the THD and THF calculation results,which warrants in-depth research.To address this,this study takes a real 34 MW large tubular hydrogenerator as an example,and establishes its electromagnetic field finite element model under no-load conditions.Two types of meshes,five mesh densities,and two mesh orders are analyzed to reveal the effect of electromagnetic field finite element mesh types and orders on the calculation results of THD and THF for such generators.
基金supported by the Ministry of Science,ICT and Future Planning of the Republic of Korea under the ITER Technology R&D ProgramNational R&D Program Through the National Research Foundation of Korea(NRF)Funded by the Ministry of Science,ICT&Future Planning(NRF-2014M1A7A1A03045372)
文摘A large-area high-power radio-frequency（RF） driven ion source was developed for positive and negative neutral beam injectors at the Korea Atomic Energy Research Institute（KAERI）. The RF ion source consists of a driver region, including a helical antenna and a discharge chamber, and an expansion region. RF power can be transferred at up to 10 kW with a fixed frequency of 2 MHz through an optimized RF matching system. An actively water-cooled Faraday shield is located inside the driver region of the ion source for the stable and steady-state operations of high-power RF discharge. Plasma ignition of the ion source is initiated by the injection of argongas without a starter-filament heating, and the argon-gas is then slowly exchanged by the injection of hydrogen-gas to produce pure hydrogen plasmas. The uniformities of the plasma parameter,such as a plasma density and an electron temperature, are measured at the lowest area of the driver region using two RF-compensated electrostatic probes along the direction of the shortand long-dimensions of the driver region. The plasma parameters will be compared with those obtained at the lowest area of the expansion bucket to analyze the plasma expansion properties from the driver region to the expansion region.
基金Funded by Guangdong Natural Science Foundation (No.00355991220615019)
文摘A numerical model of thermoelectric module （TEM） is created by academic analysis,and the impacts of the resistance ratio and thermoelement size on the output power and thermoelectric efficiency of the TEM are analyzed by the MATLAB numerical calculation.The numerical model is validated by the ANSYS thermal,electrical,and structural coupling simulation.The effects of the variable physical property parameters and contact effect on the output power and thermoelectric efficiency are evaluated,and the concept of aspect ratio optimal domain is proposed,which provides a new design approach for the TEM.
文摘随着大量新能源场站接入交直流混联电网,系统的静态电压稳定裕度(static voltage stability margin,SVSM)水平具有很大的不确定性,需要研究考虑新能源场站高阶不确定性的交直流混联电网SVSM计算方法。针对此问题,首先建立了交直流混联电网SVSM计算模型,模型中考虑了直流换流站控制方式随负荷增长的切换;采用概率盒模型描述风速与光照强度的随机波动,提出了改进区间半不变量法以获得更准确的SVSM概率盒,该方法通过K-means++聚类算法将随机变量样本划分为多个波动范围较小的样本集,以降低半不变量的线性化计算带来的误差;并结合Gram-Charlier级数展开和概率加权和计算得到考虑新能源场站高阶不确定性的系统SVSM概率盒。通过对修改的IEEE-39节点交直流系统和南方电网两个算例的分析,并与区间半不变量法和双层蒙特卡洛法比较,验证了所提出方法获得的SVSM概率盒具有较高的计算精度和效率。
文摘BIM(建筑信息模型)技术的发展使建筑领域产生了第二次变革,但BIM技术在地下输电工程的结构设计中应用较少。基于国家电网项目中即墨站220 k V地下输电工程,以输电网中的工作井为研究对象,在BIM建模软件Revit中建立了工作井模型族库,实现参数化建立工作井的BIM模型,并将模型导入结构分析软件Robot中进行计算分析。该项目实现了工作井设计及计算的批量化操作,提高了设计人员的工作效率。
