THE power industrial control system(power ICS)is thecore infrastructure that ensures the safe,stable,and efficient operation of power systems.Its architecture typi-cally adopts a hierarchical and partitioned end-edge-...THE power industrial control system(power ICS)is thecore infrastructure that ensures the safe,stable,and efficient operation of power systems.Its architecture typi-cally adopts a hierarchical and partitioned end-edge-cloud collaborative design.However,the large-scale integration ofdistributed renewable energy resources,coupled with the extensivedeployment of sensing and communication devices,has resulted inthe new-type power system characterized by dynamic complexityand high uncertainty[1]-[4].展开更多
Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency devia...Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.展开更多
The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited ...The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited attention paid to the impacts of control loop dynamics.However,the complex control dynamics,especially the interactions between the active/reactive power control loops and the current saturation process(CSP),are crucial for accurately describing the transient behavior and evaluating the stability.Thus,in this study,a new large-signal GFMC model is established,considering the reactive power control(RPC)with different kinds of controllers and the CSP simultaneously.It is revealed that GFMC does not switch to the current-limited mode immediately,and the dynamics of RPC further affect the transient behavior before the current limiting significantly.Hence,the complex control dynamics can alter the mode switching point of current saturation,thereby increasing the risk of loss of synchronization(LOS).Based on the above findings,comprehensive comparisons of typical RPC controllers are presented to facilitate practical engineering applications.A unified stability enhancement method is proposed for solving the problem of LOS.Finally,experiments validate the correctness of the analysis and the effectiveness of the proposed control strategy.展开更多
The wide-area damping controllers(WADCs),which are essential for mitigating regional low-frequency oscillations,face cyber-physical security threats due to the vulnerability of wide-area measurement system to cyber at...The wide-area damping controllers(WADCs),which are essential for mitigating regional low-frequency oscillations,face cyber-physical security threats due to the vulnerability of wide-area measurement system to cyber attacks and wind power uncertainties.This paper introduces reachability analysis method to quantify the impact of varying-amplitude attacks and uncertain wind fluctuations on the performance of WADC.Firstly,considering wind farm integration and attack injection,a nonlinear power system model with multiple buses is constructed based on Kron reduction method to improve computational efficiency and mitigate the constraints imposed by algebraic constraints.Then,a zonotope-based polytope construction method is employed to effectively model the range of attack amplitudes and wind uncertainties.By conducting reachability analysis,the reachable set preserving the nonlinear characteristics of studied system is computed,which enables the quantification of the maximum fluctuation range of regional oscillations under the dual disturbances.Case studies are undertaken on two multi-machine power systems with wind farm integration.The obtained results emphasize the efficacy of designed method,providing valuable insights into the magnitude of the impact that attacks exert on the operational characteristics of power system under various uncertain factors.展开更多
A wind-turbine power system is often challenged by voltage instability,reactive power imbalance,and limited fault ride-through capability under grid disturbances.Doubly Fed Induction Generator based wind farms,owing t...A wind-turbine power system is often challenged by voltage instability,reactive power imbalance,and limited fault ride-through capability under grid disturbances.Doubly Fed Induction Generator based wind farms,owing to their partial coupling with the grid,are particularly vulnerable to voltage dips and excessive reactive power absorption during fault events.This study proposes an adaptive control strategy based on Model Reference Adaptive Control integrated with stator flux-oriented vector control to regulate active and reactive power of a DFIG-based wind farm connected to a standard IEEE 9-bus power system under fault conditions.The proposed control scheme is developed and validated using detailed MATLAB/Simulink modeling under normal operation,symmetrical three-phase fault conditions,and post-fault recovery scenarios.A three-phase-to-ground fault is applied at the wind farm interconnection bus for a duration of 150 ms to evaluate transient performance.Simulation results demonstrate that the adaptive controller ensures fast power tracking,effective reactive power support,and enhanced voltage recovery compared to a conventional proportional–integral controller.Quantitatively,the proposed method improves voltage recovery time by approximately 45%,reduces active power overshoot by 38%,and lowers total harmonic distortion by 52% following fault clearance.Furthermore,the adaptive controller maintains stable operation under variations in wind speed and machine parameters without requiring retuning,highlighting its robustness against system uncertainties.The results confirm that the proposed control strategy significantly enhances fault ride-through capability,power quality,and dynamic stability of grid-interfaced wind farms.These findings demonstrate the practical applicability of adaptive control techniques for improving the reliability and resilience of modern power systems with high wind energy penetration.展开更多
In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm ...In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm co-design framework:the T-type three-level bidirectional converter(100 kHz switching frequency)based on silicon carbide(SiC)MOSFET is deeply integrated with fuzzy model predictive control(Fuzzy-MPC).At the hardware level,the switching trajectory and resonance suppression circuit(attenuation resonance peak 18 dB)are optimized,and the total loss is reduced by 23%compared with the traditional silicon-based IGBT.At the algorithm level,the adaptive parameter update mechanism and multi-objective rolling optimization are adopted,and the 5 ms level dynamic power allocation is realized by relying on edge computing.Experiments on 800 V DC microgrid(including 600 kW photovoltaic and 150 A·h energy storage)built based on MATLAB/Simulink hardware-in-the-loop(HIL)platform show that the system shortens the battery charging time from 42 to 28 min(the charging speed is increased by 33%).Through the 78%valley power utilization rate,the power purchase cost of high-priced power grids was significantly reduced,and the levelized electricity price decreased by 10.3%;Under the irradiation fluctuation,the renewable energy consumption rate increases by 10.1%,and the DC bus voltage fluctuation is stable within±10 V when the load step is±30%.The co-design provides an economically feasible and dynamically robust solution for the efficient integration of PV-ESG-EV in the smart grid.展开更多
To address the issue of transient low-voltage instability in AC-DC hybrid power systems following large disturbances,conventional voltage assessment and control strategies typically adopt a sequential“assess-then-act...To address the issue of transient low-voltage instability in AC-DC hybrid power systems following large disturbances,conventional voltage assessment and control strategies typically adopt a sequential“assess-then-act”paradigm,which struggles to simultaneously meet the requirements for both high accuracy and rapid response.This paper proposes a transient voltage assessment and control method based on a hybrid neural network incorporated with an improved snow ablation optimization(ISAO)algorithm.The core innovation of the proposed method lies in constructing an intelligent“physics-informed and neural network-integrated”framework,which achieves the integration of stability assessment and control strategy generation.Firstly,to construct a highly correlated input set,response characteristics reflecting the system’s voltage stable/unstable states are screened.Simultaneously,the transient voltage severity index(TVSI)is introduced as a comprehensive metric to quantify the system’s post-disturbance transient voltage performance.Furthermore,the load bus voltage sensitivity index(LVSI)is defined as the ratio of the voltage change magnitude at a load node(or bus)to the change in the system-level TVSI,thereby pinpointing the response characteristics of critical load nodes.Secondly,both the transient voltage stability assessment result and its corresponding under-voltage load shedding(UVLS)control amount are jointly utilized as the outputs of the response-driven model.Subsequently,the snow ablation optimization(SAO)algorithm is enhanced using a good point set strategy and a Gaussian mutation strategy.This improved algorithm is then employed to optimize the key hyperparameters of the hybrid neural network.Finally,the superiority of the proposed method is validated on a modified CEPRI-36 system and an actual power grid case.Comparisons with various artificial intelligence methods demonstrate its significant advantages in model speed and accuracy.Additionally,when compared to traditional emergency control schemes and UVLS strategies,the proposed method exhibits exceptional rapidness and real-time capability in control decision-making.展开更多
The increasing penetration of inverter-based resources(IBRs)and renewable energy resources poses significant challenges to the stability and controllability of modern power systems.Dynamic virtual power plants(DVPPs)h...The increasing penetration of inverter-based resources(IBRs)and renewable energy resources poses significant challenges to the stability and controllability of modern power systems.Dynamic virtual power plants(DVPPs)have emerged as a transformative solution for aggregating and controlling heterogeneously distributed energy resources(DERs)flexibly and dynamically.This paper presents a comprehensive review of DVPPs,covering their conceptual evolution—from microgrids to virtual power plants(VPPs)and fast-acting VPPs—culminating in the dynamic DVPP paradigm.This review explores key architectural frameworks,including grid-forming and grid-following roles,as well as AC/DC interfacing strategies.Emphasis is placed on secondary frequency and voltage control mechanisms,dynamic-based and market-based disaggregation,and control methodologies tailored to DERs.展开更多
To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hyb...To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.展开更多
The new energy power generation is becoming increasingly important in the power system.Such as photovoltaic power generation has become a research hotspot,however,due to the characteristics of light radiation changes,...The new energy power generation is becoming increasingly important in the power system.Such as photovoltaic power generation has become a research hotspot,however,due to the characteristics of light radiation changes,photovoltaic power generation is unstable and random,resulting in a low utilization rate and directly affecting the stability of the power grid.To solve this problem,this paper proposes a coordinated control strategy for a newenergy power generation system with a hybrid energy storage unit based on the lithium iron phosphate-supercapacitor hybrid energy storage unit.Firstly,the variational mode decomposition algorithm is used to separate the high and low frequencies of the power signal,which is conducive to the rapid and accurate suppression of the power fluctuation of the energy storage system.Secondly,the fuzzy control algorithm is introduced to balance the power between energy storage.In this paper,the actual data is used for simulation,and the simulation results show that the strategy realizes the effective suppression of the bus voltage fluctuation and the accurate control of the internal state of the energy storage unit,effectively avoiding problems such as overshoot and over-discharge,and can significantly improve the stability of the photovoltaic power generation systemand the stability of the Direct Current bus.It is of great significance to promote the development of collaborative control technology for photovoltaic hybrid energy storage units.展开更多
Grid-forming(GFM)control is a key technology for ensuring the safe and stable operation of renewable power systems dominated by converter-interfaced generation(CIG),including wind power,photovoltaic,and battery energy...Grid-forming(GFM)control is a key technology for ensuring the safe and stable operation of renewable power systems dominated by converter-interfaced generation(CIG),including wind power,photovoltaic,and battery energy storage.In this paper,we challenge the traditional approach of emulating a synchronous generator by proposing a frequency-fixed GFM control strategy.The CIG endeavors to regulate itself as a constant voltage source without control dynamics due to its capability limitation,denoted as the frequency-fixed zone.With the proposed strategy,the system frequency is almost always fixed at its rated value,achieving system active power balance independent of frequency,and intentional power flow adjustments are implemented through direct phase angle control.This approach significantly reduces the frequency dynamics and safety issues associated with frequency variations.Furthermore,synchronization dynamics are significantly diminished,and synchronization stability is enhanced.The proposed strategy has the potential to realize a renewable power system with a fixed frequency and robust stability.展开更多
The integration of cognitive radio and energy has enhanced the utilization efficiency of the spectrum and promoted the application of green energy.To begin with,this paper presents the architecture of green energy-eff...The integration of cognitive radio and energy has enhanced the utilization efficiency of the spectrum and promoted the application of green energy.To begin with,this paper presents the architecture of green energy-efficient communication and network models.It incorporates the distributed network model and the heterogeneous two-tier network model into the green cognitive radio power control and channel allocation model.The primary focus of this research lies in energy conservation at the physical layer.To mitigate the interference with primary users and address the peak constraint in secondary user power allocation,the article analyzes the system model of the cognitive radio network and subsequently elaborates on the dynamic throughput maximization allocation algorithm.Eventually,through experimental analysis and verification,the distinctiveness and comprehensiveness of the optimal power control for this subject are illustrated.展开更多
Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present ...Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present letter,we suggest a digital implementation using artificial delays where the controller employs the discrete-time measurements only.展开更多
Aiming at the challenge of complex load balancing coordination for a three-phase four-leg(3P4L)based multi-ended low voltage flexible DC distribution system(M-LVDC)considering unbalanced power compensation,this paper ...Aiming at the challenge of complex load balancing coordination for a three-phase four-leg(3P4L)based multi-ended low voltage flexible DC distribution system(M-LVDC)considering unbalanced power compensation,this paper proposes a phase-split power decoupling unbalanced compensation strategy based load balancing strategy for 3P4L based M-LVDC.Firstly,the topology and operation principle of the 3P4L-based M-LVDC system is introduced,and quasi-proportional resonant(QPR)based phase-split power current control for the 3P4L converter is proposed.Secondly,a load-balancing control strategy considering unbalanced compensation for 3P4L-based MLVDC is presented,in which the control diagrams for each 3P4L-based converter are detailed.The core idea of the proposed strategy is to comprehensively consider the imbalance compensation and load rate balancing between the two areas to calculate the split-phase power and current reference values of each 3P4L converter and achieve the static error-free tracking of the reference values through the QPR current inner-loop control.These reference values are then tracked with zero steady-state error using QPR current inner-loop control.Finally,the effectiveness of the proposed control strategy is verified through a 3P4L M-LVDC case study conducted on the PSCAD/EMTDC software.Theresults indicate that the proposed method not only can reduce the three-phase imbalance degrees from>20% to<0.5%,but also achieve excellent balanced load rates,with the load-rate difference smaller than 1.5%.展开更多
Modern shipboard microgrids(SMGs)incorporating distributed energy resources(DERs)enhance energy resilience and reduce carbon emissions.However,the hierarchical control schemes of DERs bring challenges to the tradition...Modern shipboard microgrids(SMGs)incorporating distributed energy resources(DERs)enhance energy resilience and reduce carbon emissions.However,the hierarchical control schemes of DERs bring challenges to the traditional power flow methods.This paper devises a generalized three-phase power flow approach for SMGs that integrate hierarchically controlled DERs.The main contributions include:(1)a droop-controlled three-phase Newton power flow algorithm that automatically incorporates the droop characteristics of DERs;(2)a secondary-controlled three-phase power flow method for power sharing and voltage regulation;and(3)modified Jacobian matrices to incorporate various hierarchical control modes.Numerical results demonstrate the effectiveness of the devised approach in both balanced and unbalanced three-phase hierarchically controlled SMG systems with arbitrary config-urations.展开更多
This study presents the use of an innovative population-based algorithm called the Sine Cosine Algorithm and its metaheuristic form,Quasi Oppositional Sine Cosine Algorithm,to automatic generation control of a multipl...This study presents the use of an innovative population-based algorithm called the Sine Cosine Algorithm and its metaheuristic form,Quasi Oppositional Sine Cosine Algorithm,to automatic generation control of a multiple-source-based interconnected power system that consists of thermal,gas,and hydro power plants.The Proportional-Integral-Derivative controller,which is utilized for automated generation control in an interconnected hybrid power systemwith aDClink connecting two regions,has been tuned using the proposed optimization technique.An Electric Vehicle is taken into consideration only as an electrical load.The Quasi Oppositional Sine Cosinemethod’s performance and efficacy have been compared to the Sine Cosine Algorithm and optimal output feedback controller tuning performance.Applying the QOSCA optimization technique,which has only been shown in this study in the context of an LFC research thus far,makes this paper unique.The main objective has been used to assess and compare the dynamic performances of the recommended controller along with QOSCA optimisation technic.The resilience of the controller is examined using two different system parameters:B(frequency bias parameter)and R(governor speed regulation).The sensitivity analysis results demonstrate the high reliability of the QOSCA algorithm-based controller.Once optimal controller gains are established for nominal conditions,step load perturbations up to±10%&±25%in the nominal values of the systemparameters and operational load condition do not require adjustment of the controller.Ultimately,a scenario is examined whereby EVs are used for area 1,and a single PID controller is used rather than three.展开更多
The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to e...The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to external conditions such as PV panel shading,PV component damage,can lead to PV output power imbalance,triggering the system over-modulation phenomenon,which in turn leads to grid-connected current waveform distortion.To this end,an improved power balance control strategy is proposed in this paper.Firstly,according to the different modulation ratios of each H-bridge module,a suitable harmonic injection method is used to keep the peak value of the modulating waveform always at 1;then an inverse triangular trapezoidal waveform is injected to optimize the modulating waveform,which further improves the output voltage waveform,reduces the THD value of the grid-connected currents,and maintains the stability of power inside the CHB system.Purpose.Simulation verifies the effectiveness and feasibility of this power balance control strategy.展开更多
Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating ...Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating adaptive virtual impedance with dynamic Q-V droop regulation to overcome this issue.We established a coupling model between the line impedance and power allocation to determine the quantitative relationship between reactive power deviation and impedance difference and to analyze the mechanism of reactive power deviation formation.Based on this,we proposed a transformer neural network-based online identification method for adaptive virtual impedance and dynamic droop coefficients.The self-attention mechanism dynamically characterizes the spatial distribution features of the impedance parameters considering the real-time voltage/reactive power time-series data as inputs to realize the dynamic impedance compensation without communication interaction.The contradiction constraint between the voltage drop and distribution accuracy caused by the introduction of conventional virtual impedance is improved by dynamic droop coefficient reconstruction.Lastly,we established a hardware-in-the-loop simulation platform to experimentally validate the operational efficacy and dynamic performance of the proposed control strategy under various grid scenarios.展开更多
This study investigates the Maximum Power Point Tracking(MPPT)control method of offshore windphotovoltaic hybrid power generation system with offshore crane-assisted.A new algorithm of Global Fast Integral Sliding Mod...This study investigates the Maximum Power Point Tracking(MPPT)control method of offshore windphotovoltaic hybrid power generation system with offshore crane-assisted.A new algorithm of Global Fast Integral Sliding Mode Control(GFISMC)is proposed based on the tip speed ratio method and sliding mode control.The algorithm uses fast integral sliding mode surface and fuzzy fast switching control items to ensure that the offshore wind power generation system can track the maximum power point quickly and with low jitter.An offshore wind power generation system model is presented to verify the algorithm effect.An offshore off-grid wind-solar hybrid power generation systemis built in MATLAB/Simulink.Compared with other MPPT algorithms,this study has specific quantitative improvements in terms of convergence speed,tracking accuracy or computational efficiency.Finally,the improved algorithm is further analyzed and carried out by using Yuankuan Energy’s ModelingTech semi-physical simulation platform.The results verify the feasibility and effectiveness of the improved algorithm in the offshore wind-solar hybrid power generation system.展开更多
AIM:To observe the effect of the plus power ring zone(PPRZ)area and distribution on myopia progression.METHODS:This retrospective study enrolled 137 pre-teens aged 8-12 at Taiyuan Aier Eye Hospital between 2019 and 20...AIM:To observe the effect of the plus power ring zone(PPRZ)area and distribution on myopia progression.METHODS:This retrospective study enrolled 137 pre-teens aged 8-12 at Taiyuan Aier Eye Hospital between 2019 and 2021.They were fitted with Ortho-K lenses for the first time due to refractive error,with a one-year follow-up period.To indicate the peripheral plus ring zone overlapping with the pupil zone(PPROPZ)accompanying PPRZ,participants were divided based on the PPROPZ to PPRZ ratio.The experimental group had 103 eyes with a PPROPZ to PPRZ ratio of≥0.2,and the control group had 103 eyes with a ratio of<0.2.Participants had a spherical diopter in the range of-6.00 D to-0.75 D,against-the-rule astigmatism less than 1.00 D,with-the-rule astigmatism less than 1.50 D,and corneal curvatures of 39.00 D to 46.00 D.They had a stable best corrected visual acuity of 0.10 LogMAR(20/25)or better when wearing orthokeratology(Ortho-K)lenses.PPRZ and PPROPZ were measured using ImageJ;corneal topography assessed corneal-related parameters,and an optical biometer measured the axial length of the eyes pre and post-one years of lens wear.RESULTS:Changes in axial length elongation were found to decrease when either the PPRZ(P<0.01)or PPROPZ(P<0.001)was increased significantly.The axial length growth was faster in the control group(0.37±0.2 mm)than in the experimental group(0.21±0.11 mm).Furthermore,we found that a larger horizontal visible iris diameter(HVID)corresponded to slower axial growth of the eye.In contrast,axial length growth showed no correlation with surface regularity index(SRI),surface asymmetry index(SAI),flat keratometry value(K_(f)),steep keratometry value(K_(s)).CONCLUSION:For orthokeratology,wearers with larger PPROPZ to PPRZ ratio usually experiences a reduction in axial length growth.The PPRZ and PPROPZ are negatively correlated with the axial length.Our findings provide a recommendation and methods for studying the myopia control mechanism through Ortho-K lenses.展开更多
基金partially supported by the National Natural Science Foundation of China(62293500,62293505,62233010,62503240)Natural Science Foundation of Jiangsu Province(BK20250679)。
文摘THE power industrial control system(power ICS)is thecore infrastructure that ensures the safe,stable,and efficient operation of power systems.Its architecture typi-cally adopts a hierarchical and partitioned end-edge-cloud collaborative design.However,the large-scale integration ofdistributed renewable energy resources,coupled with the extensivedeployment of sensing and communication devices,has resulted inthe new-type power system characterized by dynamic complexityand high uncertainty[1]-[4].
基金the Deanship of Scientific Research at Northern Border University,Arar,Saudi Arabia,for funding this research work through the project number“NBU-FFR-2025-3623-11”.
文摘Modern power systems increasingly depend on interconnected microgrids to enhance reliability and renewable energy utilization.However,the high penetration of intermittent renewable sources often causes frequency deviations,voltage fluctuations,and poor reactive power coordination,posing serious challenges to grid stability.Conventional Interconnection FlowControllers(IFCs)primarily regulate active power flowand fail to effectively handle dynamic frequency variations or reactive power sharing in multi-microgrid networks.To overcome these limitations,this study proposes an enhanced Interconnection Flow Controller(e-IFC)that integrates frequency response balancing and an Interconnection Reactive Power Flow Controller(IRFC)within a unified adaptive control structure.The proposed e-IFC is implemented and analyzed in DIgSILENT PowerFactory to evaluate its performance under various grid disturbances,including frequency drops,load changes,and reactive power fluctuations.Simulation results reveal that the e-IFC achieves 27.4% higher active power sharing accuracy,19.6% lower reactive power deviation,and 18.2% improved frequency stability compared to the conventional IFC.The adaptive controller ensures seamless transitions between grid-connected and islanded modes and maintains stable operation even under communication delays and data noise.Overall,the proposed e-IFCsignificantly enhances active-reactive power coordination and dynamic stability in renewable-integrated multi-microgrid systems.Future research will focus on coupling the e-IFC with tertiary-level optimization frameworks and conducting hardware-in-the-loop validation to enable its application in large-scale smart microgrid environments.
基金supported by the National Natural Science Foundation of China under Grant 52277184 and Grant 52277183.
文摘The transient synchronization stability of grid-forming converters(GFMCs)is significantly challenged under grid voltage sags.Continuous efforts have been devoted to analyzing the GFMC transient stability,with limited attention paid to the impacts of control loop dynamics.However,the complex control dynamics,especially the interactions between the active/reactive power control loops and the current saturation process(CSP),are crucial for accurately describing the transient behavior and evaluating the stability.Thus,in this study,a new large-signal GFMC model is established,considering the reactive power control(RPC)with different kinds of controllers and the CSP simultaneously.It is revealed that GFMC does not switch to the current-limited mode immediately,and the dynamics of RPC further affect the transient behavior before the current limiting significantly.Hence,the complex control dynamics can alter the mode switching point of current saturation,thereby increasing the risk of loss of synchronization(LOS).Based on the above findings,comprehensive comparisons of typical RPC controllers are presented to facilitate practical engineering applications.A unified stability enhancement method is proposed for solving the problem of LOS.Finally,experiments validate the correctness of the analysis and the effectiveness of the proposed control strategy.
基金supported in part by the Young Elite Scientists Sponsorship Program by the Chinese Society for Electrical Engineering under Grant CSEE-YESS-2022019in part by the Guangzhou Basic and Applied Basic Research Foundation under Grand 2024A04J3672in part by the National Natural Science Foundation of China under Grant 52207106.
文摘The wide-area damping controllers(WADCs),which are essential for mitigating regional low-frequency oscillations,face cyber-physical security threats due to the vulnerability of wide-area measurement system to cyber attacks and wind power uncertainties.This paper introduces reachability analysis method to quantify the impact of varying-amplitude attacks and uncertain wind fluctuations on the performance of WADC.Firstly,considering wind farm integration and attack injection,a nonlinear power system model with multiple buses is constructed based on Kron reduction method to improve computational efficiency and mitigate the constraints imposed by algebraic constraints.Then,a zonotope-based polytope construction method is employed to effectively model the range of attack amplitudes and wind uncertainties.By conducting reachability analysis,the reachable set preserving the nonlinear characteristics of studied system is computed,which enables the quantification of the maximum fluctuation range of regional oscillations under the dual disturbances.Case studies are undertaken on two multi-machine power systems with wind farm integration.The obtained results emphasize the efficacy of designed method,providing valuable insights into the magnitude of the impact that attacks exert on the operational characteristics of power system under various uncertain factors.
文摘A wind-turbine power system is often challenged by voltage instability,reactive power imbalance,and limited fault ride-through capability under grid disturbances.Doubly Fed Induction Generator based wind farms,owing to their partial coupling with the grid,are particularly vulnerable to voltage dips and excessive reactive power absorption during fault events.This study proposes an adaptive control strategy based on Model Reference Adaptive Control integrated with stator flux-oriented vector control to regulate active and reactive power of a DFIG-based wind farm connected to a standard IEEE 9-bus power system under fault conditions.The proposed control scheme is developed and validated using detailed MATLAB/Simulink modeling under normal operation,symmetrical three-phase fault conditions,and post-fault recovery scenarios.A three-phase-to-ground fault is applied at the wind farm interconnection bus for a duration of 150 ms to evaluate transient performance.Simulation results demonstrate that the adaptive controller ensures fast power tracking,effective reactive power support,and enhanced voltage recovery compared to a conventional proportional–integral controller.Quantitatively,the proposed method improves voltage recovery time by approximately 45%,reduces active power overshoot by 38%,and lowers total harmonic distortion by 52% following fault clearance.Furthermore,the adaptive controller maintains stable operation under variations in wind speed and machine parameters without requiring retuning,highlighting its robustness against system uncertainties.The results confirm that the proposed control strategy significantly enhances fault ride-through capability,power quality,and dynamic stability of grid-interfaced wind farms.These findings demonstrate the practical applicability of adaptive control techniques for improving the reliability and resilience of modern power systems with high wind energy penetration.
基金Jiangsu Provincial College Student Innovation and Entrepreneurship Program(Grant No.SJCX25_2184)—“Multi-energy Complementary Optimization and Vehicle-Storage Bidirectional Interaction Technology Driven by Novel 5E Framework”(Principal Investigator:Yuan-Yuan ShiFunding Agency:Jiangsu Provincial Education Department)+3 种基金Huaian Natural Science Research Project(Grant No.HAB2024046)—“Optimal Control of Flexible Cold-Heat-Power Integrated System with Source-Grid-Load-Storage Coordination”(Principal Investigator:Jie JiFunding Agency:Huaian Science and Technology Bureau)Huaiyin Institute of TechnologyUniversity-funded Project(GrantNo.HGYK202511)—“Data-driven CooperativeOptimization Dispatch for Source-Grid-Load Systems”(Principal Investigator:Chu-Tong ZhangFunding Agency:Huaiyin Institute of Technology).
文摘In order to solve the problems of slow dynamic response and difficult multi-source coordination of solar electric vehicle charging stations under intermittent renewable energy,this paper proposes a hardware-algorithm co-design framework:the T-type three-level bidirectional converter(100 kHz switching frequency)based on silicon carbide(SiC)MOSFET is deeply integrated with fuzzy model predictive control(Fuzzy-MPC).At the hardware level,the switching trajectory and resonance suppression circuit(attenuation resonance peak 18 dB)are optimized,and the total loss is reduced by 23%compared with the traditional silicon-based IGBT.At the algorithm level,the adaptive parameter update mechanism and multi-objective rolling optimization are adopted,and the 5 ms level dynamic power allocation is realized by relying on edge computing.Experiments on 800 V DC microgrid(including 600 kW photovoltaic and 150 A·h energy storage)built based on MATLAB/Simulink hardware-in-the-loop(HIL)platform show that the system shortens the battery charging time from 42 to 28 min(the charging speed is increased by 33%).Through the 78%valley power utilization rate,the power purchase cost of high-priced power grids was significantly reduced,and the levelized electricity price decreased by 10.3%;Under the irradiation fluctuation,the renewable energy consumption rate increases by 10.1%,and the DC bus voltage fluctuation is stable within±10 V when the load step is±30%.The co-design provides an economically feasible and dynamically robust solution for the efficient integration of PV-ESG-EV in the smart grid.
基金supported by the State Grid Shanxi Electric Power Company science and technology project“Research on Key Technologies for Voltage Stability Analysis and Control of UHV Transmission Sending-End Grid with Large-Scale Integration of Wind-Solar-Storage Systems”(520530240026).
文摘To address the issue of transient low-voltage instability in AC-DC hybrid power systems following large disturbances,conventional voltage assessment and control strategies typically adopt a sequential“assess-then-act”paradigm,which struggles to simultaneously meet the requirements for both high accuracy and rapid response.This paper proposes a transient voltage assessment and control method based on a hybrid neural network incorporated with an improved snow ablation optimization(ISAO)algorithm.The core innovation of the proposed method lies in constructing an intelligent“physics-informed and neural network-integrated”framework,which achieves the integration of stability assessment and control strategy generation.Firstly,to construct a highly correlated input set,response characteristics reflecting the system’s voltage stable/unstable states are screened.Simultaneously,the transient voltage severity index(TVSI)is introduced as a comprehensive metric to quantify the system’s post-disturbance transient voltage performance.Furthermore,the load bus voltage sensitivity index(LVSI)is defined as the ratio of the voltage change magnitude at a load node(or bus)to the change in the system-level TVSI,thereby pinpointing the response characteristics of critical load nodes.Secondly,both the transient voltage stability assessment result and its corresponding under-voltage load shedding(UVLS)control amount are jointly utilized as the outputs of the response-driven model.Subsequently,the snow ablation optimization(SAO)algorithm is enhanced using a good point set strategy and a Gaussian mutation strategy.This improved algorithm is then employed to optimize the key hyperparameters of the hybrid neural network.Finally,the superiority of the proposed method is validated on a modified CEPRI-36 system and an actual power grid case.Comparisons with various artificial intelligence methods demonstrate its significant advantages in model speed and accuracy.Additionally,when compared to traditional emergency control schemes and UVLS strategies,the proposed method exhibits exceptional rapidness and real-time capability in control decision-making.
文摘The increasing penetration of inverter-based resources(IBRs)and renewable energy resources poses significant challenges to the stability and controllability of modern power systems.Dynamic virtual power plants(DVPPs)have emerged as a transformative solution for aggregating and controlling heterogeneously distributed energy resources(DERs)flexibly and dynamically.This paper presents a comprehensive review of DVPPs,covering their conceptual evolution—from microgrids to virtual power plants(VPPs)and fast-acting VPPs—culminating in the dynamic DVPP paradigm.This review explores key architectural frameworks,including grid-forming and grid-following roles,as well as AC/DC interfacing strategies.Emphasis is placed on secondary frequency and voltage control mechanisms,dynamic-based and market-based disaggregation,and control methodologies tailored to DERs.
基金supported by Science and Technology Project of the headquarters of the State Grid Corporation of China(No.5500-202324492A-3-2-ZN).
文摘To enhance power flow regulation in scenarios involving large-scale renewable energy transmission via high-voltage direct current(HVDC)links and multi-infeed DC systems in load-center regions,this paper proposes a hybrid modular multilevel converter–capacitor-commutated line-commutated converter(MMC-CLCC)HVDC transmission system and its corresponding control strategy.First,the system topology is constructed,and a submodule configuration method for the MMC—combining full-bridge submodules(FBSMs)and half-bridge submodules(HBSMs)—is proposed to enable direct power flow reversal.Second,a hierarchical control strategy is introduced,includingMMCvoltage control,CLCC current control,and a coordinationmechanism,along with the derivation of the hybrid system’s power flow reversal characteristics.Third,leveraging the CLCC’s fast current regulation and theMMC’s negative voltage control capability,a coordinated power flow reversal control strategy is developed.Finally,an 800 kV MMC-CLCC hybrid HVDC system is modeled in PSCAD/EMTDC to validate the power flow reversal performance under a high proportion of full-bridge submodule configuration.Results demonstrate that the proposed control strategy enables rapid(1-s transition)and smooth switching of bidirectional power flow without modifying the structure of primary equipment:the transient fluctuation ofDC voltage from the rated value(UdcN)to themaximumreverse voltage(-kUdcN)is less than 5%;the DC current strictly follows the preset characteristic curve with a deviation of≤3%;the active power reverses continuously,and the system maintains stable operation throughout the reversal process.
基金supported by the State Grid Corporation of China Science and Technology Project,grant number 52270723000900K.
文摘The new energy power generation is becoming increasingly important in the power system.Such as photovoltaic power generation has become a research hotspot,however,due to the characteristics of light radiation changes,photovoltaic power generation is unstable and random,resulting in a low utilization rate and directly affecting the stability of the power grid.To solve this problem,this paper proposes a coordinated control strategy for a newenergy power generation system with a hybrid energy storage unit based on the lithium iron phosphate-supercapacitor hybrid energy storage unit.Firstly,the variational mode decomposition algorithm is used to separate the high and low frequencies of the power signal,which is conducive to the rapid and accurate suppression of the power fluctuation of the energy storage system.Secondly,the fuzzy control algorithm is introduced to balance the power between energy storage.In this paper,the actual data is used for simulation,and the simulation results show that the strategy realizes the effective suppression of the bus voltage fluctuation and the accurate control of the internal state of the energy storage unit,effectively avoiding problems such as overshoot and over-discharge,and can significantly improve the stability of the photovoltaic power generation systemand the stability of the Direct Current bus.It is of great significance to promote the development of collaborative control technology for photovoltaic hybrid energy storage units.
基金supported by the National Key Research&Development Program of China under Grant 2024YFB2408900.
文摘Grid-forming(GFM)control is a key technology for ensuring the safe and stable operation of renewable power systems dominated by converter-interfaced generation(CIG),including wind power,photovoltaic,and battery energy storage.In this paper,we challenge the traditional approach of emulating a synchronous generator by proposing a frequency-fixed GFM control strategy.The CIG endeavors to regulate itself as a constant voltage source without control dynamics due to its capability limitation,denoted as the frequency-fixed zone.With the proposed strategy,the system frequency is almost always fixed at its rated value,achieving system active power balance independent of frequency,and intentional power flow adjustments are implemented through direct phase angle control.This approach significantly reduces the frequency dynamics and safety issues associated with frequency variations.Furthermore,synchronization dynamics are significantly diminished,and synchronization stability is enhanced.The proposed strategy has the potential to realize a renewable power system with a fixed frequency and robust stability.
文摘The integration of cognitive radio and energy has enhanced the utilization efficiency of the spectrum and promoted the application of green energy.To begin with,this paper presents the architecture of green energy-efficient communication and network models.It incorporates the distributed network model and the heterogeneous two-tier network model into the green cognitive radio power control and channel allocation model.The primary focus of this research lies in energy conservation at the physical layer.To mitigate the interference with primary users and address the peak constraint in secondary user power allocation,the article analyzes the system model of the cognitive radio network and subsequently elaborates on the dynamic throughput maximization allocation algorithm.Eventually,through experimental analysis and verification,the distinctiveness and comprehensiveness of the optimal power control for this subject are illustrated.
基金supported by the National Natural Science Foundation of China(62403296,62303292,62173218).
文摘Dear Editor,This letter investigates the grid-forming control for power converters.Recently,grid-forming control based on matching of synchronous machines was suggested by using continuous measurements.In the present letter,we suggest a digital implementation using artificial delays where the controller employs the discrete-time measurements only.
基金supported by the key technology project of China Southern Power Grid Corporation(GZKJXM20220041)partly by theNational Key Research and Development Plan(2022YFE0205300).
文摘Aiming at the challenge of complex load balancing coordination for a three-phase four-leg(3P4L)based multi-ended low voltage flexible DC distribution system(M-LVDC)considering unbalanced power compensation,this paper proposes a phase-split power decoupling unbalanced compensation strategy based load balancing strategy for 3P4L based M-LVDC.Firstly,the topology and operation principle of the 3P4L-based M-LVDC system is introduced,and quasi-proportional resonant(QPR)based phase-split power current control for the 3P4L converter is proposed.Secondly,a load-balancing control strategy considering unbalanced compensation for 3P4L-based MLVDC is presented,in which the control diagrams for each 3P4L-based converter are detailed.The core idea of the proposed strategy is to comprehensively consider the imbalance compensation and load rate balancing between the two areas to calculate the split-phase power and current reference values of each 3P4L converter and achieve the static error-free tracking of the reference values through the QPR current inner-loop control.These reference values are then tracked with zero steady-state error using QPR current inner-loop control.Finally,the effectiveness of the proposed control strategy is verified through a 3P4L M-LVDC case study conducted on the PSCAD/EMTDC software.Theresults indicate that the proposed method not only can reduce the three-phase imbalance degrees from>20% to<0.5%,but also achieve excellent balanced load rates,with the load-rate difference smaller than 1.5%.
基金supported in part by the Department of Navy award N00014-24-1-2287 and N00014-23-1-2124。
文摘Modern shipboard microgrids(SMGs)incorporating distributed energy resources(DERs)enhance energy resilience and reduce carbon emissions.However,the hierarchical control schemes of DERs bring challenges to the traditional power flow methods.This paper devises a generalized three-phase power flow approach for SMGs that integrate hierarchically controlled DERs.The main contributions include:(1)a droop-controlled three-phase Newton power flow algorithm that automatically incorporates the droop characteristics of DERs;(2)a secondary-controlled three-phase power flow method for power sharing and voltage regulation;and(3)modified Jacobian matrices to incorporate various hierarchical control modes.Numerical results demonstrate the effectiveness of the devised approach in both balanced and unbalanced three-phase hierarchically controlled SMG systems with arbitrary config-urations.
文摘This study presents the use of an innovative population-based algorithm called the Sine Cosine Algorithm and its metaheuristic form,Quasi Oppositional Sine Cosine Algorithm,to automatic generation control of a multiple-source-based interconnected power system that consists of thermal,gas,and hydro power plants.The Proportional-Integral-Derivative controller,which is utilized for automated generation control in an interconnected hybrid power systemwith aDClink connecting two regions,has been tuned using the proposed optimization technique.An Electric Vehicle is taken into consideration only as an electrical load.The Quasi Oppositional Sine Cosinemethod’s performance and efficacy have been compared to the Sine Cosine Algorithm and optimal output feedback controller tuning performance.Applying the QOSCA optimization technique,which has only been shown in this study in the context of an LFC research thus far,makes this paper unique.The main objective has been used to assess and compare the dynamic performances of the recommended controller along with QOSCA optimisation technic.The resilience of the controller is examined using two different system parameters:B(frequency bias parameter)and R(governor speed regulation).The sensitivity analysis results demonstrate the high reliability of the QOSCA algorithm-based controller.Once optimal controller gains are established for nominal conditions,step load perturbations up to±10%&±25%in the nominal values of the systemparameters and operational load condition do not require adjustment of the controller.Ultimately,a scenario is examined whereby EVs are used for area 1,and a single PID controller is used rather than three.
基金supported by the National Natural Science Foundation of China,Regional Science Foundation Project,52367009,Study on Bow Net Dynamics Modeling and Coupling Smoothness of High speed AC Rigid Network in the Long Tunnel Section of Sichuan Tibet Railway.
文摘The cascaded H-bridge(CHB)multilevel inverter has become one of the most widely used PV inverter topologies due to its high voltage processing capability and high quality output power.Grid-connected PV system due to external conditions such as PV panel shading,PV component damage,can lead to PV output power imbalance,triggering the system over-modulation phenomenon,which in turn leads to grid-connected current waveform distortion.To this end,an improved power balance control strategy is proposed in this paper.Firstly,according to the different modulation ratios of each H-bridge module,a suitable harmonic injection method is used to keep the peak value of the modulating waveform always at 1;then an inverse triangular trapezoidal waveform is injected to optimize the modulating waveform,which further improves the output voltage waveform,reduces the THD value of the grid-connected currents,and maintains the stability of power inside the CHB system.Purpose.Simulation verifies the effectiveness and feasibility of this power balance control strategy.
基金supported by the National Natural Science Foundation of China(No.62063016)the Science and Technology Plan of Gansu Province(No.25JRRA088).
文摘Conventional droop control in multi-parallel grid-forming inverters exhibits poor reactive power sharing accuracy due to line impedance mismatches.In this study,we proposed a coordination control strategy integrating adaptive virtual impedance with dynamic Q-V droop regulation to overcome this issue.We established a coupling model between the line impedance and power allocation to determine the quantitative relationship between reactive power deviation and impedance difference and to analyze the mechanism of reactive power deviation formation.Based on this,we proposed a transformer neural network-based online identification method for adaptive virtual impedance and dynamic droop coefficients.The self-attention mechanism dynamically characterizes the spatial distribution features of the impedance parameters considering the real-time voltage/reactive power time-series data as inputs to realize the dynamic impedance compensation without communication interaction.The contradiction constraint between the voltage drop and distribution accuracy caused by the introduction of conventional virtual impedance is improved by dynamic droop coefficient reconstruction.Lastly,we established a hardware-in-the-loop simulation platform to experimentally validate the operational efficacy and dynamic performance of the proposed control strategy under various grid scenarios.
基金supported by the 2022 Sanya Science and Technology Innovation Project,China(No.2022KJCX03)the Sanya Science and Education Innovation Park,Wuhan University of Technology,China(Grant No.2022KF0028)the Hainan Provincial Joint Project of Sanya Yazhou Bay Science and Technology City,China(Grant No.2021JJLH0036).
文摘This study investigates the Maximum Power Point Tracking(MPPT)control method of offshore windphotovoltaic hybrid power generation system with offshore crane-assisted.A new algorithm of Global Fast Integral Sliding Mode Control(GFISMC)is proposed based on the tip speed ratio method and sliding mode control.The algorithm uses fast integral sliding mode surface and fuzzy fast switching control items to ensure that the offshore wind power generation system can track the maximum power point quickly and with low jitter.An offshore wind power generation system model is presented to verify the algorithm effect.An offshore off-grid wind-solar hybrid power generation systemis built in MATLAB/Simulink.Compared with other MPPT algorithms,this study has specific quantitative improvements in terms of convergence speed,tracking accuracy or computational efficiency.Finally,the improved algorithm is further analyzed and carried out by using Yuankuan Energy’s ModelingTech semi-physical simulation platform.The results verify the feasibility and effectiveness of the improved algorithm in the offshore wind-solar hybrid power generation system.
文摘AIM:To observe the effect of the plus power ring zone(PPRZ)area and distribution on myopia progression.METHODS:This retrospective study enrolled 137 pre-teens aged 8-12 at Taiyuan Aier Eye Hospital between 2019 and 2021.They were fitted with Ortho-K lenses for the first time due to refractive error,with a one-year follow-up period.To indicate the peripheral plus ring zone overlapping with the pupil zone(PPROPZ)accompanying PPRZ,participants were divided based on the PPROPZ to PPRZ ratio.The experimental group had 103 eyes with a PPROPZ to PPRZ ratio of≥0.2,and the control group had 103 eyes with a ratio of<0.2.Participants had a spherical diopter in the range of-6.00 D to-0.75 D,against-the-rule astigmatism less than 1.00 D,with-the-rule astigmatism less than 1.50 D,and corneal curvatures of 39.00 D to 46.00 D.They had a stable best corrected visual acuity of 0.10 LogMAR(20/25)or better when wearing orthokeratology(Ortho-K)lenses.PPRZ and PPROPZ were measured using ImageJ;corneal topography assessed corneal-related parameters,and an optical biometer measured the axial length of the eyes pre and post-one years of lens wear.RESULTS:Changes in axial length elongation were found to decrease when either the PPRZ(P<0.01)or PPROPZ(P<0.001)was increased significantly.The axial length growth was faster in the control group(0.37±0.2 mm)than in the experimental group(0.21±0.11 mm).Furthermore,we found that a larger horizontal visible iris diameter(HVID)corresponded to slower axial growth of the eye.In contrast,axial length growth showed no correlation with surface regularity index(SRI),surface asymmetry index(SAI),flat keratometry value(K_(f)),steep keratometry value(K_(s)).CONCLUSION:For orthokeratology,wearers with larger PPROPZ to PPRZ ratio usually experiences a reduction in axial length growth.The PPRZ and PPROPZ are negatively correlated with the axial length.Our findings provide a recommendation and methods for studying the myopia control mechanism through Ortho-K lenses.
