Power offset is zero-order term in the capacity versus signal-to-noise ratio curve. In this paper, approximate analysis of power offset is presented to describe MIMO system with uniform linear antenna arrays of fixed ...Power offset is zero-order term in the capacity versus signal-to-noise ratio curve. In this paper, approximate analysis of power offset is presented to describe MIMO system with uniform linear antenna arrays of fixed length. It is assumed that the number of receive antenna is larger than that of transmit antenna. Spatially Correlated MIMO Channel is approximated by tri-diagonal toeplitz matrix. The determinant of tri-diagonal toeplitz matrix, which is fitted by elementary curve, is one of the key factors related to power offset. Based on the curve fitting, the determinant of tri-diagonal toeplitz matrix is mathematically tractable. Consequently, the expression of local extreme points can be derived to optimize power offset. The simulation results show that approximation above is accurate in local extreme points of power offset. The proposed expression of local extreme points is helpful to approach optimal power offset.展开更多
A compacted and low-offset low-power CMOS am- plifier for biosensor application is presented in this paper. It includes a low offset Op-Amp and a high precision current reference. With a novel continuous-time DC offse...A compacted and low-offset low-power CMOS am- plifier for biosensor application is presented in this paper. It includes a low offset Op-Amp and a high precision current reference. With a novel continuous-time DC offset rejection scheme, the IC achieves lower offset voltage and lower power consumption compared to previous designs. This configuration rejects large DC offset and drift that exist at the skin-electrode interface without the need of external components. The proposed amplifier has been implemented in SMIC 0.18-μm 1P6M CMOS technol-ogy, with an active silicon area of 100 μm by 120 μm. The back-annotated simulation results demonstrated the circuit features the systematic offset voltage less than 80 μV, the offset drift about 0.27 μV/℃ for temperature ranging from –30℃ to 100℃ and the total power dissipation consumed as low as 37.8 μW from a 1.8 V single supply. It dedicated to monitor low amplitude biomedical signals recording.展开更多
Keyhole is one of the important phenomena in high-power laser welding process. By studying the keyhole characteristic and detecting the seam offset during high-power fiber laser welding, an infrared sensitive high-spe...Keyhole is one of the important phenomena in high-power laser welding process. By studying the keyhole characteristic and detecting the seam offset during high-power fiber laser welding, an infrared sensitive high-speed camera arranged off-axis orientation of laser beam was applied to capture the dynamic thermal images of a molten pool. The 304 austenitic stainless steel plate butt joint welding experiment with laser power 10 kW was carried out. Through analyzing the keyhole infrared image, the weld position was calculated. Least squares method was used to determine the actual weld position. Image filtering technique was used to process the keyhole image, and the keyhole centroid coordinate were calculated. Also, least squares method was used to fit the keyhole centroid curve equation and establish a nonlinear continuous model which described the deviation between keyhole centroid and weld seam. The heat accumulation effect affected by the infrared radiation was analyzed to determine whether the laser beam focus spot deviated from the desired welding seam. Experimental results showed that the keyhole centroid has related to the seam offset, and can reflect the welding quality.展开更多
在无线电能传输(wireless power transfer,WPT)系统中,偏移是不可避免的,偏移会引起系统参数的变化从而影响系统的传输性能。基于S-S和P-S补偿拓扑,提出一种具有抗偏移特性的双耦合SP-S补偿的紧凑型WPT系统。该系统采用两个同轴布置、...在无线电能传输(wireless power transfer,WPT)系统中,偏移是不可避免的,偏移会引起系统参数的变化从而影响系统的传输性能。基于S-S和P-S补偿拓扑,提出一种具有抗偏移特性的双耦合SP-S补偿的紧凑型WPT系统。该系统采用两个同轴布置、相互解耦的圆角方形线圈作为能量的发射线圈,其与单一方形接收线圈均有耦合,提升了X方向和Y方向的抗偏移容忍度。通过谐振参数配置使接收线圈在偏移的过程中,一个线圈回路的输出增加,另一个线圈回路输出减少,从而使系统输出随接收线圈位置偏移波动平缓。提出方形解耦线圈结构参数的设计方法,并分析发射端并联补偿电容对输出抗偏移性能的影响。最后,搭建实验平台验证该方法的有效性与系统的抗偏移能力。展开更多
This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorit...This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorithm achieves PAPR reduction by applying the complex conjugates of the data symbol obtained from the frequency domain to cancel the phase of the data symbol.A likelihood estimator is used to obtain the sub-carrier phase error due to the residual carrier frequency offset（RCFO） using the same complex conjugates as a pilot signal.Furthermore,a joint time and frequency domain multicarrier phase locked loop（MPLL） is developed to compensate additional frequency offset.Simulation results show that this algorithm is capable of reducing PAPR without impacting the frequency tracking performance.展开更多
文摘Power offset is zero-order term in the capacity versus signal-to-noise ratio curve. In this paper, approximate analysis of power offset is presented to describe MIMO system with uniform linear antenna arrays of fixed length. It is assumed that the number of receive antenna is larger than that of transmit antenna. Spatially Correlated MIMO Channel is approximated by tri-diagonal toeplitz matrix. The determinant of tri-diagonal toeplitz matrix, which is fitted by elementary curve, is one of the key factors related to power offset. Based on the curve fitting, the determinant of tri-diagonal toeplitz matrix is mathematically tractable. Consequently, the expression of local extreme points can be derived to optimize power offset. The simulation results show that approximation above is accurate in local extreme points of power offset. The proposed expression of local extreme points is helpful to approach optimal power offset.
文摘A compacted and low-offset low-power CMOS am- plifier for biosensor application is presented in this paper. It includes a low offset Op-Amp and a high precision current reference. With a novel continuous-time DC offset rejection scheme, the IC achieves lower offset voltage and lower power consumption compared to previous designs. This configuration rejects large DC offset and drift that exist at the skin-electrode interface without the need of external components. The proposed amplifier has been implemented in SMIC 0.18-μm 1P6M CMOS technol-ogy, with an active silicon area of 100 μm by 120 μm. The back-annotated simulation results demonstrated the circuit features the systematic offset voltage less than 80 μV, the offset drift about 0.27 μV/℃ for temperature ranging from –30℃ to 100℃ and the total power dissipation consumed as low as 37.8 μW from a 1.8 V single supply. It dedicated to monitor low amplitude biomedical signals recording.
文摘Keyhole is one of the important phenomena in high-power laser welding process. By studying the keyhole characteristic and detecting the seam offset during high-power fiber laser welding, an infrared sensitive high-speed camera arranged off-axis orientation of laser beam was applied to capture the dynamic thermal images of a molten pool. The 304 austenitic stainless steel plate butt joint welding experiment with laser power 10 kW was carried out. Through analyzing the keyhole infrared image, the weld position was calculated. Least squares method was used to determine the actual weld position. Image filtering technique was used to process the keyhole image, and the keyhole centroid coordinate were calculated. Also, least squares method was used to fit the keyhole centroid curve equation and establish a nonlinear continuous model which described the deviation between keyhole centroid and weld seam. The heat accumulation effect affected by the infrared radiation was analyzed to determine whether the laser beam focus spot deviated from the desired welding seam. Experimental results showed that the keyhole centroid has related to the seam offset, and can reflect the welding quality.
文摘在无线电能传输(wireless power transfer,WPT)系统中,偏移是不可避免的,偏移会引起系统参数的变化从而影响系统的传输性能。基于S-S和P-S补偿拓扑,提出一种具有抗偏移特性的双耦合SP-S补偿的紧凑型WPT系统。该系统采用两个同轴布置、相互解耦的圆角方形线圈作为能量的发射线圈,其与单一方形接收线圈均有耦合,提升了X方向和Y方向的抗偏移容忍度。通过谐振参数配置使接收线圈在偏移的过程中,一个线圈回路的输出增加,另一个线圈回路输出减少,从而使系统输出随接收线圈位置偏移波动平缓。提出方形解耦线圈结构参数的设计方法,并分析发射端并联补偿电容对输出抗偏移性能的影响。最后,搭建实验平台验证该方法的有效性与系统的抗偏移能力。
基金supported by the National Natural Science Foundation of China(60872026)the Natural Science Foundation of Tianjin(09JCZDJC16900)
文摘This paper presents an algorithm that aims to reduce the peak-to-average power ratio（PAPR） of orthogonal frequency division multiplexing（OFDM） communication systems while maintaining frequency tracking.The algorithm achieves PAPR reduction by applying the complex conjugates of the data symbol obtained from the frequency domain to cancel the phase of the data symbol.A likelihood estimator is used to obtain the sub-carrier phase error due to the residual carrier frequency offset（RCFO） using the same complex conjugates as a pilot signal.Furthermore,a joint time and frequency domain multicarrier phase locked loop（MPLL） is developed to compensate additional frequency offset.Simulation results show that this algorithm is capable of reducing PAPR without impacting the frequency tracking performance.
