This paper presents a method of multicopter intercep-tion control based on visual servo and virtual tube in a cluttered environment.The proposed hybrid heuristic function improves the efficiency of the A*algorithm.The...This paper presents a method of multicopter intercep-tion control based on visual servo and virtual tube in a cluttered environment.The proposed hybrid heuristic function improves the efficiency of the A*algorithm.The revised objective function makes the virtual tube generating curve not only smooth but also close to the path points generated by the A*algorithm.In six dif-ferent simulation scenarios,the efficiency of the modified A*algorithm is 6.2%higher than that of the traditional A*algorithm.The efficiency of path planning and virtual tube planning is veri-fied by simulations.The effectiveness of interception control is verified by a software-in-loop(SIL)simulation.展开更多
The operation efficiency of the manipulator is placed in the primary position in automatic production. This paper proposes a coordinated control strategy for joint servo and visual servo to enable timely transfer and ...The operation efficiency of the manipulator is placed in the primary position in automatic production. This paper proposes a coordinated control strategy for joint servo and visual servo to enable timely transfer and accurate gripping in the working area. Aiming at the issues of chattering and slow convergence of traditional sliding mode controller, a fast variable power reaching rate on the basis of the non-singular fast terminal sliding mode controller is proposed, which can effectively reduce the convergence time and chattering. For the purpose of addressing the problem that the traditional visual servo control method is sensitive to the environment, a visual servo controller based on integral sliding mode is proposed, to ensure the favorable positioning accuracy of the manipulator. Based on the two proposed controllers mentioned above, a coordinated control strategy is used to implement the control of the manipulator. Finally, the upper computer software is developed using the C# programming language to monitor the workstation. The feasibility of the above-mentioned method is verified through multiple simulations and experiments.展开更多
This study proposes a refined methodology for controlling building heights in heritage areas.In order to protect the visual integrity of the heritage area,buildings should not obstruct the view from important site poi...This study proposes a refined methodology for controlling building heights in heritage areas.In order to protect the visual integrity of the heritage area,buildings should not obstruct the view from important site points and viewpoints to the periphery.By calculating the building height thresholds that buildings should not obscure the view from each viewpoint,the results of which are weighted and superimposed,and the values are extracted to each building unit as a refined building height control guideline.This study takes the Zhoukoudian area as a case study,applies the refined building height control criterion to the Zhoukoudian Site,and relies on this refined criterion to assess the visual integrity of the Zhoukoudian area,so as to realize the scientific planning and monitoring of the Zhoukoudian area.The refined building height control method can be applied to building height planning and visual landscape protection in large heritage areas.展开更多
Bio-inspired magnetic helical microrobots have great potential for biomedical and micromanipulation applications. Precise interaction with objects in liquid environments is an important prerequisite and challenge for ...Bio-inspired magnetic helical microrobots have great potential for biomedical and micromanipulation applications. Precise interaction with objects in liquid environments is an important prerequisite and challenge for helical microrobots to perform various tasks. In this study, an automatic control method is proposed to realize the axial docking of helical microrobots with arbitrarily placed cylindrical objects in liquid environments. The docking process is divided into ascent, approach, alignment, and insertion stages. First, a 3D docking path is planned according to the positions and orientations of the microrobot and the target object. Second, a steering-based 3D path-following controller guides the helical microrobot to rise away from the container bottom and approach the target along the path. Third, based on path design with gravity compensation and steering output limits, alignment of position and orientation can be accomplished simultaneously. Finally, the helical microrobot completes the docking under the rotating magnetic field along the target orientation. Experiments verified the automatic docking of the helical microrobot with static targets, including connecting with micro-shafts and inserting into micro-tubes. The object grasping of a reconfigurable helical microrobot aided by 3D automatic docking was also demonstrated. This method enables precise docking of helical microrobots with objects, which might be used for capture and sampling, in vivo navigation control, and functional assembly of microrobots.展开更多
A visual servoing tracking controller is proposed based on the sliding mode control theory in order to achieve strong robustness against parameter variations and external disturbances. A sliding plane with time delay ...A visual servoing tracking controller is proposed based on the sliding mode control theory in order to achieve strong robustness against parameter variations and external disturbances. A sliding plane with time delay compensation is presented by the pre-estimate of states. To reduce the chattering of the sliding mode controller, a modified exponential reaching law and hyperbolic tangent function are applied to the design of visual controller and robot joint controller. Simulation results show that the visual servoing control scheme is robust and has good tracking performance.展开更多
A real-time arc welding robot visual control system based on a local network with a multi-level hierarchy is developed in this paper. It consists of an intelligence and human-machine interface level, a motion planning...A real-time arc welding robot visual control system based on a local network with a multi-level hierarchy is developed in this paper. It consists of an intelligence and human-machine interface level, a motion planning level, a motion control level and a servo control level. The last three levels form a local real-time open robot controller, which realizes motion planning and motion control of a robot. A camera calibration method based on the relative movement of the end-effector connected to a robot is proposed and a method for tracking weld seam based on the structured light stereovision is provided. Combining the parameters of the cameras and laser plane, three groups of position values in Cartesian space are obtained for each feature point in a stripe projected on the weld seam. The accurate three-dimensional position of the edge points in the weld seam can be calculated from the obtained parameters with an information fusion algorithm. By calculating the weld seam parameter from position and image data, the movement parameters of the robot used for tracking can be determined. A swing welding experiment of type V groove weld is successfully conducted, the results of which show that the system has high resolution seam tracking in real-time, and works stably and efficiently.展开更多
There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most ...There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.展开更多
A new visual servo control scheme for a robotic manipulator is presented in this paper, where a back propagation （BP） neural network is used to make a direct transition from image feature to joint angles without req...A new visual servo control scheme for a robotic manipulator is presented in this paper, where a back propagation （BP） neural network is used to make a direct transition from image feature to joint angles without requiring robot kinematics and camera calibration. To speed up the convergence and avoid local minimum of the neural network, this paper uses a genetic algorithm to find the optimal initial weights and thresholds and then uses the BP Mgorithm to train the neural network according to the data given. The proposed method can effectively combine the good global searching ability of genetic algorithms with the accurate local searching feature of BP neural network. The Simulink model for PUMA560 robot visual servo system based on the improved BP neural network is built with the Robotics Toolbox of Matlab. The simulation results indicate that the proposed method can accelerate convergence of the image errors and provide a simple and effective way of robot control.展开更多
Methods of arc length control and visual image based weld detection for precision pulse TIG welding were investigated. With a particular all hardware circuit, arc voltage during peak current stage is sampled and inte...Methods of arc length control and visual image based weld detection for precision pulse TIG welding were investigated. With a particular all hardware circuit, arc voltage during peak current stage is sampled and integrated to indicate arc length, deviation of arc length and adjusting parameters are calculated and output to drive a step motor directly. According to the features of welding image grabbed with CCD camera, a special algorithm was developed to detect the central line of weld fast and accurately. Then an application system were established, whose static arc length error is ±0.1 mm with 20 A average current and 1 mm given arc length, static detection precision of weld is 0.01 mm , processing time of each image is less than 120 ms . Precision pulse TIG welding of some given thin stainless steel components with complicated curved surface was successfully realized.展开更多
In order to further improve the efficiency of video compression, we introduce a perceptual characteristics of Human Visual System (HVS) to video coding, and propose a novel video coding rate control algorithm based on...In order to further improve the efficiency of video compression, we introduce a perceptual characteristics of Human Visual System (HVS) to video coding, and propose a novel video coding rate control algorithm based on human visual saliency model in H.264/AVC. Firstly, we modifie Itti's saliency model. Secondly, target bits of each frame are allocated through the correlation of saliency region between the current and previous frame, and the complexity of each MB is modified through the saliency value and its Mean Absolute Difference (MAD) value. Lastly, the algorithm was implemented in JVT JM12.2. Simulation results show that, comparing with traditional rate control algorithm, the proposed one can reduce the coding bit rate and improve the reconstructed video subjective quality, especially for visual saliency region. It is very suitable for wireless video transmission.展开更多
In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML...In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.展开更多
The rapid increase in resource sharing across domains in the cloud comput- ing environment makes the task of managing inter-domain access control policy integration difficult for the security administrators. Al- thoug...The rapid increase in resource sharing across domains in the cloud comput- ing environment makes the task of managing inter-domain access control policy integration difficult for the security administrators. Al- though a number of policy integration and sec- urity analysis mechanisms have been devel- oped, few focus on enabling the average ad- ministrator by providing an intuitive cognitive sense about the integrated policies, which considerably undermines the usability factor. In this paper we propose a visualization flame- work for inter-domain access control policy integration, which integrates Role Based Ac- cess Control （RBAC） policies on the basis of role-mapping and then visualizes the inte- grated result. The role mapping algorithm in the framework considers the hybrid role hier- archy. It can not only satisfy the security con- straints of non-cyclic inheritance and separa- tion of duty but also make visualization easier. The framework uses role-permission trees and semantic substrates to visualize the integrated policies. Through the interactive policy query visualization, the average administrator can gain an intuitive understanding of the policy integration result.展开更多
In IBVS (image based visual servoing), the error signal in image space should be transformed into the control signal in the input space quickly. To avoid the iterative adjustment and complicated inverse solution of im...In IBVS (image based visual servoing), the error signal in image space should be transformed into the control signal in the input space quickly. To avoid the iterative adjustment and complicated inverse solution of image Jacobian, CMAC (cerebellar model articulation controller) neural network is inserted into visual servo control loop to implement the nonlinear mapping. Two control schemes are used. Simulation results on two schemes are provided, which show a better tracking precision and stability can be achieved using scheme 2.展开更多
In this paper, we propose the novel robot motion planning model based on the visual navigation and fuzzy control. A robot operating system can be viewed as the mechanical energy converter from the joint space to the g...In this paper, we propose the novel robot motion planning model based on the visual navigation and fuzzy control. A robot operating system can be viewed as the mechanical energy converter from the joint space to the global operation space, and the fiexibility of the robot system refi ects the global transformation ability of the whole system. Fuzzy control technology is a kind of fuzzy science, artificial intelligence, knowledge engineering and other disciplines interdisciplinary fields, the theory of strong science and technology, to achieve this fuzzy control technology theory, known as the fuzzy control theory. Besides this, this paper integrates the visual navigation system to construct the better robust methodology which is meaningful.展开更多
This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work...This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work with. This paper introduces indoor inspection helicopter system with only inspection camera and prism for position sensing as payload. The control system is designed to help the operator of the inspection system to control the helicopter to designated position without much practice. The cases of the control by experienced and novice operators are compared and results show that the system has feasibility for indoor inspection system to be used by any kind of users.展开更多
In this paper,a visual servoing approach is developed to capture the docking rings of tumbling non-cooperative satellites with a space manipulator.The primary challenge addressed is the potential for the docking ring ...In this paper,a visual servoing approach is developed to capture the docking rings of tumbling non-cooperative satellites with a space manipulator.The primary challenge addressed is the potential for the docking ring to leave the monocular camera’s field-of-view as the manipulator approaches the target,due to the ring’s large size.To solve this issue,a two-phase visual servoing scheme combining a monocular camera and a three-line structured light vision system is proposed.In an effort to augment the success rate and safety of capture operations,several constraints are formulated,encompassing manipulator’s kinematics,monocular camera’s field-of-view,obstacle avoidance,structured light’s breakpoints and smooth capture.Subsequently,a nonlinear model predictive controller is proposed to manage these constraints in real-time and regulate the system.System models are established based on image moments and pose for each phase,selecting these features as visual feedback to simplify the formulation of servo constraints and avoid the complex circle-based pose measurement.Furthermore,to ensure unbiased predictions,the model disturbances arising from the imprecise estimation of target motion parameter are observed using an extended Kalman filter,which are then incorporated into the predictive control framework.The simulation results demonstrate the effectiveness of this scheme.展开更多
Objective: to analyze the effect of visual training in the prevention and control of juvenile myopia. Methods: 100 cases of juvenile myopia treated in our hospital from December 2017 to December 2018 were divided into...Objective: to analyze the effect of visual training in the prevention and control of juvenile myopia. Methods: 100 cases of juvenile myopia treated in our hospital from December 2017 to December 2018 were divided into reference group and experimental group by lot, with 50 cases in each group. The reference group received medical optometry according to the reference requirements, and the experimental group received visual training on the basis of the reference group. The changes of ocular axis length of the two groups after the intervention and the adjustment lag of the two groups before and after the intervention were compared. Results: the length of ocular axis in the experimental group was lower than that in the reference group, and the comparison between the groups had statistical value (P < 0.05);In the comparison of adjustment lag, there was no difference between the two groups before intervention (P > 0.05);After the intervention, the experimental group was lower than the reference group, and there was significant difference between the groups (P < 0.05). Conclusion: in order to reduce juvenile myopia, visual training can delay the growth of ocular axis length, reduce the amount of adjustment lag and myopia, which is conducive to the healthy growth of adolescents.展开更多
This paper presents a learning-based control framework for fast(<1.5 s)and accurate manipulation of a flexible object,i.e.,whip targeting.The framework consists of a motion planner learned or optimized by an algori...This paper presents a learning-based control framework for fast(<1.5 s)and accurate manipulation of a flexible object,i.e.,whip targeting.The framework consists of a motion planner learned or optimized by an algorithm,Online Impedance Adaptation Control(OIAC),a sim2real mechanism,and a visual feedback component.The experimental results show that a soft actor-critic algorithm outperforms three Deep Reinforcement Learning(DRL),a nonlinear optimization,and a genetic algorithm in learning generalization of motion planning.It can greatly reduce average learning trials(to<20 of others)and maximize average rewards(to>3 times of others).Besides,motion tracking errors are greatly reduced to 13.29 and 22.36 of constant impedance control by the OIAC of the proposed framework.In addition,the trajectory similarity between simulated and physical whips is 89.09.The presented framework provides a new method integrating data-driven and physics-based algorithms for controlling fast and accurate arm manipulation of a flexible object.展开更多
Small video satellites have unique advantages of short development cycle,agile attitude maneuver,real-time video imaging.They have broad application prospects in space debris,faulty spacecraft,and other space target d...Small video satellites have unique advantages of short development cycle,agile attitude maneuver,real-time video imaging.They have broad application prospects in space debris,faulty spacecraft,and other space target detection and tracking.However,when a space target first enters the camera’s visual field,it has a relatively large angular velocity relative to the satellite,which makes it easy to deviate from the visual field and cause off-target problems.This paper proposes a novel visual tracking control method based on potential function preventing missed targets in space.Firstly,a circular area in the image plane is designed as a mandatory restricted projection area of the target and a visual tracking controller based on image error.Then,a potential function is designed to ensure continuous and stable tracking of the target after entering the visual field.Finally,the stability of the control is proved using Barbarat’s lemma.By setting the same conditions and comparing with the simulation results of the proportion-derivative(PD)control method,the results show that when there is a large relative attitude motion angular velocity between the target and the satellite,the track-ing method based on potential function can ensure that the tar-get does not deviate from the field-of-view during the tracking control process,and the projection of target is controlled to the desired position.The proposed control method is effective in eliminating tracking error and preventing off-target simultane-ously.展开更多
基金supported by the National Natural Science Foundation of China(62303350).
文摘This paper presents a method of multicopter intercep-tion control based on visual servo and virtual tube in a cluttered environment.The proposed hybrid heuristic function improves the efficiency of the A*algorithm.The revised objective function makes the virtual tube generating curve not only smooth but also close to the path points generated by the A*algorithm.In six dif-ferent simulation scenarios,the efficiency of the modified A*algorithm is 6.2%higher than that of the traditional A*algorithm.The efficiency of path planning and virtual tube planning is veri-fied by simulations.The effectiveness of interception control is verified by a software-in-loop(SIL)simulation.
基金supported by the National Natural Science Foundation of China(No.62273189)the Natural Science Foundation of Shandong Province(No.ZR2021MF005).
文摘The operation efficiency of the manipulator is placed in the primary position in automatic production. This paper proposes a coordinated control strategy for joint servo and visual servo to enable timely transfer and accurate gripping in the working area. Aiming at the issues of chattering and slow convergence of traditional sliding mode controller, a fast variable power reaching rate on the basis of the non-singular fast terminal sliding mode controller is proposed, which can effectively reduce the convergence time and chattering. For the purpose of addressing the problem that the traditional visual servo control method is sensitive to the environment, a visual servo controller based on integral sliding mode is proposed, to ensure the favorable positioning accuracy of the manipulator. Based on the two proposed controllers mentioned above, a coordinated control strategy is used to implement the control of the manipulator. Finally, the upper computer software is developed using the C# programming language to monitor the workstation. The feasibility of the above-mentioned method is verified through multiple simulations and experiments.
文摘This study proposes a refined methodology for controlling building heights in heritage areas.In order to protect the visual integrity of the heritage area,buildings should not obstruct the view from important site points and viewpoints to the periphery.By calculating the building height thresholds that buildings should not obscure the view from each viewpoint,the results of which are weighted and superimposed,and the values are extracted to each building unit as a refined building height control guideline.This study takes the Zhoukoudian area as a case study,applies the refined building height control criterion to the Zhoukoudian Site,and relies on this refined criterion to assess the visual integrity of the Zhoukoudian area,so as to realize the scientific planning and monitoring of the Zhoukoudian area.The refined building height control method can be applied to building height planning and visual landscape protection in large heritage areas.
基金supported by the National Natural Science Foundation of China(No.62273117)Pre-research Task(No.SKLRS202418B)of State Key Laboratory of Robotics and Systems(HIT).
文摘Bio-inspired magnetic helical microrobots have great potential for biomedical and micromanipulation applications. Precise interaction with objects in liquid environments is an important prerequisite and challenge for helical microrobots to perform various tasks. In this study, an automatic control method is proposed to realize the axial docking of helical microrobots with arbitrarily placed cylindrical objects in liquid environments. The docking process is divided into ascent, approach, alignment, and insertion stages. First, a 3D docking path is planned according to the positions and orientations of the microrobot and the target object. Second, a steering-based 3D path-following controller guides the helical microrobot to rise away from the container bottom and approach the target along the path. Third, based on path design with gravity compensation and steering output limits, alignment of position and orientation can be accomplished simultaneously. Finally, the helical microrobot completes the docking under the rotating magnetic field along the target orientation. Experiments verified the automatic docking of the helical microrobot with static targets, including connecting with micro-shafts and inserting into micro-tubes. The object grasping of a reconfigurable helical microrobot aided by 3D automatic docking was also demonstrated. This method enables precise docking of helical microrobots with objects, which might be used for capture and sampling, in vivo navigation control, and functional assembly of microrobots.
基金supported by China Postdoctoral Science Founda-tion (No. 20080441093)Key Laboratory Foundation of Liaoning Province (No. 2008S088).
文摘A visual servoing tracking controller is proposed based on the sliding mode control theory in order to achieve strong robustness against parameter variations and external disturbances. A sliding plane with time delay compensation is presented by the pre-estimate of states. To reduce the chattering of the sliding mode controller, a modified exponential reaching law and hyperbolic tangent function are applied to the design of visual controller and robot joint controller. Simulation results show that the visual servoing control scheme is robust and has good tracking performance.
基金This work was supported by the National High Technology Research and Development Program of China under Grant 2002AA422160 by the National Key Fundamental Research and the Devel-opment Project of China (973) under Grant 2002CB312200.
文摘A real-time arc welding robot visual control system based on a local network with a multi-level hierarchy is developed in this paper. It consists of an intelligence and human-machine interface level, a motion planning level, a motion control level and a servo control level. The last three levels form a local real-time open robot controller, which realizes motion planning and motion control of a robot. A camera calibration method based on the relative movement of the end-effector connected to a robot is proposed and a method for tracking weld seam based on the structured light stereovision is provided. Combining the parameters of the cameras and laser plane, three groups of position values in Cartesian space are obtained for each feature point in a stripe projected on the weld seam. The accurate three-dimensional position of the edge points in the weld seam can be calculated from the obtained parameters with an information fusion algorithm. By calculating the weld seam parameter from position and image data, the movement parameters of the robot used for tracking can be determined. A swing welding experiment of type V groove weld is successfully conducted, the results of which show that the system has high resolution seam tracking in real-time, and works stably and efficiently.
基金supported in part by the Institute for Guo Qiang of Tsinghua University(2019GQG1023)in part by Graduate Education and Teaching Reform Project of Tsinghua University(202007J007)+1 种基金in part by National Natural Science Foundation of China(U19B2029,62073028,61803222)in part by the Independent Research Program of Tsinghua University(2018Z05JDX002)。
文摘There are two main trends in the development of unmanned aerial vehicle(UAV)technologies:miniaturization and intellectualization,in which realizing object tracking capabilities for a nano-scale UAV is one of the most challenging problems.In this paper,we present a visual object tracking and servoing control system utilizing a tailor-made 38 g nano-scale quadrotor.A lightweight visual module is integrated to enable object tracking capabilities,and a micro positioning deck is mounted to provide accurate pose estimation.In order to be robust against object appearance variations,a novel object tracking algorithm,denoted by RMCTer,is proposed,which integrates a powerful short-term tracking module and an efficient long-term processing module.In particular,the long-term processing module can provide additional object information and modify the short-term tracking model in a timely manner.Furthermore,a positionbased visual servoing control method is proposed for the quadrotor,where an adaptive tracking controller is designed by leveraging backstepping and adaptive techniques.Stable and accurate object tracking is achieved even under disturbances.Experimental results are presented to demonstrate the high accuracy and stability of the whole tracking system.
文摘A new visual servo control scheme for a robotic manipulator is presented in this paper, where a back propagation （BP） neural network is used to make a direct transition from image feature to joint angles without requiring robot kinematics and camera calibration. To speed up the convergence and avoid local minimum of the neural network, this paper uses a genetic algorithm to find the optimal initial weights and thresholds and then uses the BP Mgorithm to train the neural network according to the data given. The proposed method can effectively combine the good global searching ability of genetic algorithms with the accurate local searching feature of BP neural network. The Simulink model for PUMA560 robot visual servo system based on the improved BP neural network is built with the Robotics Toolbox of Matlab. The simulation results indicate that the proposed method can accelerate convergence of the image errors and provide a simple and effective way of robot control.
文摘Methods of arc length control and visual image based weld detection for precision pulse TIG welding were investigated. With a particular all hardware circuit, arc voltage during peak current stage is sampled and integrated to indicate arc length, deviation of arc length and adjusting parameters are calculated and output to drive a step motor directly. According to the features of welding image grabbed with CCD camera, a special algorithm was developed to detect the central line of weld fast and accurately. Then an application system were established, whose static arc length error is ±0.1 mm with 20 A average current and 1 mm given arc length, static detection precision of weld is 0.01 mm , processing time of each image is less than 120 ms . Precision pulse TIG welding of some given thin stainless steel components with complicated curved surface was successfully realized.
基金supported by National Natural Science Foundation of China under Grant No.610700800973 Sub-Program Projects under Grant No.2009CB320906+3 种基金National Science and Technology of Major Special Projects under Grant No.2010ZX03004-003S&T Planning Project of Hubei Provincial Department of Education under Grant No. Q20112805H&SPlanning Project of Hubei Provincial Department of Education under Grant No.2011jyte142Science Foundation of HubeiProvincial under Grant No.2010CDB05103
文摘In order to further improve the efficiency of video compression, we introduce a perceptual characteristics of Human Visual System (HVS) to video coding, and propose a novel video coding rate control algorithm based on human visual saliency model in H.264/AVC. Firstly, we modifie Itti's saliency model. Secondly, target bits of each frame are allocated through the correlation of saliency region between the current and previous frame, and the complexity of each MB is modified through the saliency value and its Mean Absolute Difference (MAD) value. Lastly, the algorithm was implemented in JVT JM12.2. Simulation results show that, comparing with traditional rate control algorithm, the proposed one can reduce the coding bit rate and improve the reconstructed video subjective quality, especially for visual saliency region. It is very suitable for wireless video transmission.
文摘In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.
基金supported in part by National Key Basic Research Program of China (973 Program) under Grant No.2013CB329603National Natural Science Foundation of China under Grant No.60903191
文摘The rapid increase in resource sharing across domains in the cloud comput- ing environment makes the task of managing inter-domain access control policy integration difficult for the security administrators. Al- though a number of policy integration and sec- urity analysis mechanisms have been devel- oped, few focus on enabling the average ad- ministrator by providing an intuitive cognitive sense about the integrated policies, which considerably undermines the usability factor. In this paper we propose a visualization flame- work for inter-domain access control policy integration, which integrates Role Based Ac- cess Control （RBAC） policies on the basis of role-mapping and then visualizes the inte- grated result. The role mapping algorithm in the framework considers the hybrid role hier- archy. It can not only satisfy the security con- straints of non-cyclic inheritance and separa- tion of duty but also make visualization easier. The framework uses role-permission trees and semantic substrates to visualize the integrated policies. Through the interactive policy query visualization, the average administrator can gain an intuitive understanding of the policy integration result.
基金This project is supported by National Natural Science Foundation of China (No.59990470).
文摘In IBVS (image based visual servoing), the error signal in image space should be transformed into the control signal in the input space quickly. To avoid the iterative adjustment and complicated inverse solution of image Jacobian, CMAC (cerebellar model articulation controller) neural network is inserted into visual servo control loop to implement the nonlinear mapping. Two control schemes are used. Simulation results on two schemes are provided, which show a better tracking precision and stability can be achieved using scheme 2.
文摘In this paper, we propose the novel robot motion planning model based on the visual navigation and fuzzy control. A robot operating system can be viewed as the mechanical energy converter from the joint space to the global operation space, and the fiexibility of the robot system refi ects the global transformation ability of the whole system. Fuzzy control technology is a kind of fuzzy science, artificial intelligence, knowledge engineering and other disciplines interdisciplinary fields, the theory of strong science and technology, to achieve this fuzzy control technology theory, known as the fuzzy control theory. Besides this, this paper integrates the visual navigation system to construct the better robust methodology which is meaningful.
文摘This paper is on control system design for visual based indoor inspection by the model helicopters. For the indoor inspection system for large structures, there are some cases where it is difficult for htunans to work with. This paper introduces indoor inspection helicopter system with only inspection camera and prism for position sensing as payload. The control system is designed to help the operator of the inspection system to control the helicopter to designated position without much practice. The cases of the control by experienced and novice operators are compared and results show that the system has feasibility for indoor inspection system to be used by any kind of users.
基金supported by the China Postdoctoral Science Foundation(No.2022M710956).
文摘In this paper,a visual servoing approach is developed to capture the docking rings of tumbling non-cooperative satellites with a space manipulator.The primary challenge addressed is the potential for the docking ring to leave the monocular camera’s field-of-view as the manipulator approaches the target,due to the ring’s large size.To solve this issue,a two-phase visual servoing scheme combining a monocular camera and a three-line structured light vision system is proposed.In an effort to augment the success rate and safety of capture operations,several constraints are formulated,encompassing manipulator’s kinematics,monocular camera’s field-of-view,obstacle avoidance,structured light’s breakpoints and smooth capture.Subsequently,a nonlinear model predictive controller is proposed to manage these constraints in real-time and regulate the system.System models are established based on image moments and pose for each phase,selecting these features as visual feedback to simplify the formulation of servo constraints and avoid the complex circle-based pose measurement.Furthermore,to ensure unbiased predictions,the model disturbances arising from the imprecise estimation of target motion parameter are observed using an extended Kalman filter,which are then incorporated into the predictive control framework.The simulation results demonstrate the effectiveness of this scheme.
文摘Objective: to analyze the effect of visual training in the prevention and control of juvenile myopia. Methods: 100 cases of juvenile myopia treated in our hospital from December 2017 to December 2018 were divided into reference group and experimental group by lot, with 50 cases in each group. The reference group received medical optometry according to the reference requirements, and the experimental group received visual training on the basis of the reference group. The changes of ocular axis length of the two groups after the intervention and the adjustment lag of the two groups before and after the intervention were compared. Results: the length of ocular axis in the experimental group was lower than that in the reference group, and the comparison between the groups had statistical value (P < 0.05);In the comparison of adjustment lag, there was no difference between the two groups before intervention (P > 0.05);After the intervention, the experimental group was lower than the reference group, and there was significant difference between the groups (P < 0.05). Conclusion: in order to reduce juvenile myopia, visual training can delay the growth of ocular axis length, reduce the amount of adjustment lag and myopia, which is conducive to the healthy growth of adolescents.
基金supported in part by the Brødrene Hartmanns(No.A36775)Thomas B.Thriges(No.7648-2106)+1 种基金Fabrikant Mads Clausens(No.2023-0210)EnergiFyn funds.
文摘This paper presents a learning-based control framework for fast(<1.5 s)and accurate manipulation of a flexible object,i.e.,whip targeting.The framework consists of a motion planner learned or optimized by an algorithm,Online Impedance Adaptation Control(OIAC),a sim2real mechanism,and a visual feedback component.The experimental results show that a soft actor-critic algorithm outperforms three Deep Reinforcement Learning(DRL),a nonlinear optimization,and a genetic algorithm in learning generalization of motion planning.It can greatly reduce average learning trials(to<20 of others)and maximize average rewards(to>3 times of others).Besides,motion tracking errors are greatly reduced to 13.29 and 22.36 of constant impedance control by the OIAC of the proposed framework.In addition,the trajectory similarity between simulated and physical whips is 89.09.The presented framework provides a new method integrating data-driven and physics-based algorithms for controlling fast and accurate arm manipulation of a flexible object.
文摘Small video satellites have unique advantages of short development cycle,agile attitude maneuver,real-time video imaging.They have broad application prospects in space debris,faulty spacecraft,and other space target detection and tracking.However,when a space target first enters the camera’s visual field,it has a relatively large angular velocity relative to the satellite,which makes it easy to deviate from the visual field and cause off-target problems.This paper proposes a novel visual tracking control method based on potential function preventing missed targets in space.Firstly,a circular area in the image plane is designed as a mandatory restricted projection area of the target and a visual tracking controller based on image error.Then,a potential function is designed to ensure continuous and stable tracking of the target after entering the visual field.Finally,the stability of the control is proved using Barbarat’s lemma.By setting the same conditions and comparing with the simulation results of the proportion-derivative(PD)control method,the results show that when there is a large relative attitude motion angular velocity between the target and the satellite,the track-ing method based on potential function can ensure that the tar-get does not deviate from the field-of-view during the tracking control process,and the projection of target is controlled to the desired position.The proposed control method is effective in eliminating tracking error and preventing off-target simultane-ously.
