Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current ev...Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.展开更多
This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investig...This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.展开更多
Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spi...Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spinal procedures.A key objec-tive of many orthopedic studies is to assess the biocompatibility of implants with bone and adjacent soft tissue.This study aims to evaluate the biocompatibility and effects of the Pedicle screw-Rod configuration as a novel external fixation method in canine tibial osteotomy.Methods:With ethics approval,eight healthy,intact male dogs,aged 10-12 months and weighing between 20 and 22 kg,underwent a minimally invasive medial tibial approach for surgical fixation of tibial osteotomy using a Pedicle screw-Rod configu-ration.Postoperative evaluations included ultrasound assessments at the osteotomy site and histological evaluations at the bone-screw interface.Results:B-mode ultrasound evaluation indicated healing progress at all osteotomy sites.The color Doppler examination revealed an initial increase in signals in the sur-rounding soft tissue during the first 4 weeks post-operation,followed by a decrease in signals within the adjacent soft tissue between the 5th and 8th weeks.During this latter period,the signals were primarily concentrated on the bone surface and the callus.The bone-screw interface at various screw sites exhibited similar histological changes,indicating effective integration of the newly formed woven bone into the screw threads.Conclusions:Fixation of non-articular tibial osteotomy with Pedicle screw-Rod con-figuration resulted in secondary bone healing,characterized by abundant callus for-mation and neovascularization.This implant demonstrated favorable biocompatibility with bone and surrounding soft tissue,without significant complications.展开更多
The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims ...The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims to develop a hybrid model that combines the Fracture Aquifer Index(FAI)with the conventional GOD(Groundwater occurrence,Overall lithology,Depth to water table)method,to assess groundwater vulnerability in fractured aquifer.To develop the hybrid model,the classical GOD method was integrated with FAI to produce a single composite index.Each parameter within both GOD and FAI was scored,and a final index was calculated to delineate vulnerable areas.The results show that the study area can be classified into four vulnerability levels:Very low,low,moderate,and high,indicating that approximately 8%of the area exhibits very low vulnerability,29%has low vulnerability,25%falls into the moderate category,and 38%is considered highly vulnerable.The FAI-GOD model further incorporates fracture network characteristics.This refinement reduces the classification to three vulnerability classes:Low,medium,and high.The outcomes demonstrate that 46%of the area is highly vulnerable due to a dense concentration of fractures,while 17%represents an intermediate zone characterized by either shallow or deeper fractures.In contrast,37%corresponds to areas with lightly fractured rock,where the impact on vulnerability is minimal.Multivariate statistical analysis was employed using Principal Components Analysis(PCA)and Hierarchical Cluster Analysis(HCA)on 24 samples across six variables.The first three components account for over 76%of the total variance,reinforcing the significance of fracture dynamics in classifying vulnerability levels.The FAI-GOD model removes the very-low-vulnerability class and expands the spatial extent of low-and high-vulnerability zones,reflecting the dominant influence of fracture networks on aquifer sensitivity.While both indices use a five-class system,FAI-GOD redistributes vulnerability by eliminating very-low-vulnerability areas and amplifying low/high categories,highlighting the critical role of fractures.A strong correlation(R2=0.94)between the GOD and FAI-GOD indices,demonstrated through second-order polynomial regression,confirms the robustness of the FAI-GOD model in accurately predicting vulnerability to pollution.This model provides a useful framework for assessing the vulnerability of complex aquifers and serves as a decision-making tool for groundwater managers in similar areas.展开更多
BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupt...BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupture,peroneal tendon rupture,and fibular fracture in a snowboarder,highlighting the complex nature of diagnosis,management,and rehabilitation.CASE SUMMARY A 50-year-old male snowboarder presented with severe right ankle pain following a high speed tumbling crash.Initial evaluation revealed an Achilles tendon rupture and a non-displaced distal lateral malleolus fracture.Subsequent magnetic resonance imaging confirmed complete tears of the Achilles tendon and both peroneus longus and brevis tendons,along with a Weber A lateral malleolus fracture.Surgical intervention included a 4-suture core Kraków repair of the Achilles tendon with calcaneal docking,open reduction and internal fixation of the distal fibula fracture,and primary repair of both peroneal tendons.Postoperatively,a modified Achilles repair protocol was implemented.At 16 weeks post-surgery,radiographs showed a well-healed fibular fracture,and physical examination confirmed intact Achilles and peroneal tendon repairs.By 6 months,the patient had regained full daily and work activities,including recreational pursuits.CONCLUSION This case underscores the importance of maintaining a high index of suspicion for concomitant injuries in high-energy ankle trauma during snow sports.Timely advanced imaging and a comprehensive surgical approach are crucial for optimal outcomes in such complex cases.展开更多
Objective:To analyze the clinical application value of autologous periosteum graft combined with platelet-rich plasma(PRP)in the treatment of long bone fractures in the extremities.Methods:A total of 40 patients with ...Objective:To analyze the clinical application value of autologous periosteum graft combined with platelet-rich plasma(PRP)in the treatment of long bone fractures in the extremities.Methods:A total of 40 patients with long bone fractures in the extremities admitted to Santai Hospital Affiliated to North Sichuan Medical College from January 2023 to January 2025 were included,including cases of upper extremity forearm fractures and lower extremity femoral and tibial fractures.The patients were evenly divided using a random number table,with the control group undergoing open reduction and internal fixation(ORIF)combined with autologous periosteum graft,and the observation group undergoing ORIF,autologous periosteum graft,and PRP injection.Surgical indicators,complication rates,excellent fracture healing rates,functional satisfaction,and joint range of motion were compared between the two groups.Results:The surgical indicators in the observation group were similar to those in the control group(p>0.05).The complication rate in the observation group was lower than that in the control group,while the excellent fracture healing rate and functional satisfaction were higher in the observation group(p<0.05).Conclusion:Autologous periosteum graft combined with PRP technology is safe and reliable for the treatment of long bone fractures in the extremities,with satisfactory clinical outcomes.展开更多
BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges f...BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges from nonoperative methods to surgical interventions such as intramedullary K-wires,which promote faster rehabilitation and improved elbow mobility.AIM To evaluate the outcomes of managing humeral shaft fractures using closed reduction and internal fixation with flexible intramedullary K-wires.METHODS This was a retrospective cohort study analyzing the medical records of patients with humeral shaft fractures managed with flexible intramedullary K-wires at King Abdulaziz Medical City,using non-random sampling and descriptive analysis for outcome evaluation.RESULTS This study assessed the clinical outcomes of 20 patients treated for humeral shaft fractures with intramedullary K-wires.Patients were predominantly male(n=16,80%),had an average age of 39.2 years,and a mean body mass index of 29.5 kg/m^(2).The fractures most frequently occurred in the middle third of the humerus(n=14,70%),with oblique fractures being the most common type(n=7,35%).All surgeries used general anesthesia and a posterior approach,with no intraoperative complications reported.Postoperatively,all patients achieved clinical and radiological union(n=20,100%),and the majority(n=13,65%)reached an elbow range of motion from 0 to 150 degrees.CONCLUSION These results suggest that intramedullary K-wire fixation may be an effective option for treating humeral shaft fractures,with favorable outcomes in range of motion recovery,fracture union,and a low rate of intraoperative complications.展开更多
The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing te...The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.展开更多
Objective:To analyze the improvement effect of early postoperative rehabilitation training on balance ability and quality of life in elderly patients with hip fracture.Methods:A total of 50 elderly patients with hip f...Objective:To analyze the improvement effect of early postoperative rehabilitation training on balance ability and quality of life in elderly patients with hip fracture.Methods:A total of 50 elderly patients with hip fracture admitted to our hospital from January 2023 to January 2024 were selected and divided into the observation group(25 cases)and the control group(25 cases)by random number table method.The control group received routine nursing,while the observation group received early rehabilitation training on the basis of routine nursing.The balance ability(Berg Balance Scale,BBS)and quality of life(SF-36)of the two groups were compared.Results:The BBS scores of the observation group at all postoperative time points were significantly higher than those of the control group(p<0.05),and the quality-of-life scores of the observation group were also significantly higher than those of the control group(p<0.05).Conclusion:Early postoperative rehabilitation training for elderly patients with hip fracture can improve their balance ability,enhance their quality of life,and reduce the incidence of postoperative complications,which is worthy of clinical promotion.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains chall...Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.展开更多
During the exploitation of sandstone gas reservoirs,natural fractures near the wellbore affect water infiltration and pore evolution;however,the impact mechanisms of these fractures remain unclear.This study utilized ...During the exploitation of sandstone gas reservoirs,natural fractures near the wellbore affect water infiltration and pore evolution;however,the impact mechanisms of these fractures remain unclear.This study utilized real-time nuclear magnetic resonance(RT-NMR)technology to investigate the influence of near-wellbore fracture angle(a)at 0°,15°,30°,and 45°on water infiltration,migration patterns,and pore evolution mechanisms during water injection.Throughout the experiments,T_(2)curves and magnetic resonance imaging(MRI)were monito red in real time during the water injection process.The pore evolution and water infiltration were translated by the evolution of T_(2)curves and MRI.The results show that increasing injection pressure(P_(inj))transforms adsorption pores into seepage pores,leading to enhanced pore damage.Pore damage predominantly occurs during the rapid pressurization stage and is concentrated around the near-wellbore fracture.The maximum infiltration area and rate were observed at α=0°,while the minimum values occurred at α=45°,which can be attributed to the significant influence of a on water infiltration and migration pathways.The increasing inclination of the infiltration front with a is attributed to the fact that the rate of water infiltration along the fracture wall is always higher than that at the fracture tip.In field fracturing,it is recommended to adjust the perforation direction to align with the natural fracture orientation and optimize pressurization strategies by reducing the slow pressurization duration while extending the rapid pressurization stage.These findings can provide important guidance for setting fracturing sections and optimizing injection parameters in sandstone gas reservoir exploitation.展开更多
Many new and developed oilfields are confined to carbonate reservoirs with a complex void space structure.In this study,the behavior of carbonates as a function of decreased reservoir pressure was examined.The study w...Many new and developed oilfields are confined to carbonate reservoirs with a complex void space structure.In this study,the behavior of carbonates as a function of decreased reservoir pressure was examined.The study was based on actual production data from wells rather than just on model data or results from computational experiments.Well-test data(170 well tests)and laboratory core samples(45 samples)results were used in the analysis.The problem of reservoir deformation has been compre-hensively addressed at the micro and macro levels.The effect of reservoir permeability throughout the entire reservoir volume on reservoir pressure was determined.With a decline in reservoir pressure,the permeability of fractures and pores in carbonates decreases.The deformation coefficients,which char-acterize the actual rate of decrease in permeability with decreasing reservoir pressure,were also calculated.The deformation coefficients and data from core studies using μ-CT and SEM were compared.Based on micro-CT data,the effective diameters of the voids were calculated to be 93μm,109μm,and 140μm for the Vinnikovskoe,Sofinskoe,and Sukharev fields,respectively.Based on μ-CT and SEM data,the predominant geometric shapes of the voids were assessed.The deformation coefficient of voids was found to depend on their size and geometric shape.The study's findings revealed deformation co-efficients of 0.172,0.205,and 0.748 for the Vinnikovskoe,Sofinskoe,and Sukharev fields,respectively.Maximum deformation coefficients are typical for large voids with a predominant slot-like shape.However,even with the predominance of primary spherical voids in carbonates,the permeability of voids decreases with decreasing reservoir pressure.展开更多
To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fract...To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.展开更多
The large reef complexes of the Upper Permian Changxing Formation, with a significant breakthrough for petroleum exploration, are an important target for petroleum exploration in the Yuanba area of the Sichuan Basin i...The large reef complexes of the Upper Permian Changxing Formation, with a significant breakthrough for petroleum exploration, are an important target for petroleum exploration in the Yuanba area of the Sichuan Basin in SW China. The storage space types of reef complexes are dominated by the dissolved pore-fracture（DPF）. However, using only single geophysical methods, it is difficult to predict effective distribution of DPF. Based on a combination of geological models and geophysics technology, this study proposes two new geophysical methods, including anisotropy coherence technique（ACT） and fracture intensity inversion（FII）, to research the characteristics of DPF by faciescontrolling in Changxing Formation in Yuanba area. Two major findings are presented as follows：（1） the characteristics of DPF varying with facies are the result of different diagenetic and petrophysical property. The intensity of DPF decreases from reef and bioclastic bank to interbank sea and slope;（2） ACT can qualitatively identify the distribution of DPF with no-directional and dispersed distribution, while FII can quantitatively characterize the intensity of DPF development within various sedimentary facies. When integrated into the geological study, ACT and FII can provide an effective way to predict the distribution of DPF in similar geological settings and the predicted DPF have been supported by the historical well data.展开更多
There are millimeter, micron and nanometer scales of pores and fractures in coal to describe different scales of coal pores and fissures communicating path and to quantitatively characterize their permeability. Such i...There are millimeter, micron and nanometer scales of pores and fractures in coal to describe different scales of coal pores and fissures communicating path and to quantitatively characterize their permeability. Such information provides an important basis for studying coalbed methane output mechanism. The pores and fissures in a large number of coal samples were observed and counted by scanning electron microscopy and optical microscopy. The probability distribution models of pore-fissure network were then established. Different scales of pore-fissures 2D network models were reconstructed by Monte Carlo method. The 2D seepage models were obtained through assignment zero method and using Matlab software. The effect of permeability on different scale pore-fractures network was obtained by two-dimensional seepage equation. Predicted permeability is compared with the measured ones. The results showed that the dominant order of different scale pore-fractures connected path from high to low is millimeter-sized fractures, seepage pores and micron-size fractures. The contribution of coal reservoir permeability from large to small is millimeter-size fractures, micron-size fractures and seepage pores. Different parameters in different scale pore-fractures are of different influence permeability.Reconstruction of different scale pore-fractures network can clearly display the connectivity of porefractures, which can provide a basis for selecting migration path and studying gas flow pattern.展开更多
The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of ke...The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.展开更多
Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experime...Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experimental testing,digital core technology,and theoretical modelling.Two CRL types with contrasting mesostructures were characterized across three scales.Macroscopically,CRL-I and CRL-II exhibited mean compressive strengths of 8.46 and 5.17 MPa,respectively.Mesoscopically,CRL-I featured small-scale highly interconnected pores,whilst CRL-II developed larger stratified pores with diminished connectivity.Microscopically,both CRL matrices demonstrated remarkable similarity in mineral composition and mechanical properties.A novel voxel average-based digital core scaling methodology was developed to facilitate numerical simulation of cross-scale damage processes,revealing network-progressive failure in CRL-I versus directional-brittle failure in CRL-II.Furthermore,a damage statistical constitutive model based on digital core technology and mesoscopic homogenisation theory established quantitative relationships between microelement strength distribution and macroscopic mechanical behavior.These findings illuminate the fundamental mechanisms through which mesoscopic structure governs the macroscopic mechanical properties of CRL.展开更多
Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and...Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and gas extraction.Central to this phenomenon is the transport of proppants,tiny solid particles injected into the fractures to prevent them from closing once the injection is stopped.However,effective transport and deposition of proppant is critical in keeping fracture pathways open,especially in lowpermeability reservoirs.This review explores,then quantifies,the important role of fluid inertia and turbulent flows in governing proppant transport.While traditional models predominantly assume and then characterise flow as laminar,this may not accurately capture the complexities inherent in realworld hydraulic fracturing and proppant emplacement.Recent investigations highlight the paramount importance of fluid inertia,especially at the high Reynolds numbers typically associated with fracturing operations.Fluid inertia,often overlooked,introduces crucial forces that influence particle settling velocities,particle-particle interactions,and the eventual deposition of proppants within fractures.With their inherent eddies and transient and chaotic nature,turbulent flows introduce additional complexities to proppant transport,crucially altering proppant settling velocities and dispersion patterns.The following comprehensive survey of experimental,numerical,and analytical studies elucidates controls on the intricate dynamics of proppant transport under fluid inertia and turbulence-towards providing a holistic understanding of the current state-of-the-art,guiding future research directions,and optimising hydraulic fracturing practices.展开更多
文摘Complex trimalleolar ankle fractures are a major orthopaedic challenge,with an incidence of 4.22 per 10000 person-years in the United States and an annual cost of 3.4 billion dollars.This review synthesizes current evidence on diagnostic protocols and management strategies,highlighting optimal approaches and emerging trends.Initial care emphasizes soft tissue assessment,often guided by the Tscherne classification,and fracture classification systems.External fixation may be required in open injuries,while early open reduction and internal fixation within six days is linked to improved outcomes.Minimally invasive techniques for the lateral malleolus,including intramedullary nailing and locking plates,are effective,while medial malleolus fractures are commonly managed with screw fixation or tension-band wiring.Posterior malleolus fragments involving more than 25%of the articular surface usually warrant fixation.Alternatives to syndesmotic screws,such as cortical buttons or high-strength sutures,reduce the need for secondary procedures.Arthroscopic-assisted open reduction and internal fixation benefits younger,active patients by enabling concurrent management of intra-articular and ligamentous injuries.Postoperative care prioritizes early weight-bearing and validated functional scores.Despite advances,complications remain common,and further research is needed to refine surgical strategies and improve outcomes.
基金support provided by the National Natural Science Foundation of China(No.52274077)the Natural Science Foundation of Henan(No.242300421072)+2 种基金the Youth Elite Teachers Cultivation Program for Higher Education Institutions in Henan Province(No.2024GGJS036)the Funds for Distinguished Young Scholars of Henan Polytechnic University(No.J2023-3)the Young Core Teacher Funding Scheme of Henan Polytechnic University(No.2023XQG-09).
文摘This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.
基金The Vice Chancellor of Research and Technology at Urmia University。
文摘Background:Biological osteosynthesis preserves blood supply and promotes rapid healing by aligning fracture fragments without direct surgical exposure.Pedicle screws are primarily designed for internal fixation in spinal procedures.A key objec-tive of many orthopedic studies is to assess the biocompatibility of implants with bone and adjacent soft tissue.This study aims to evaluate the biocompatibility and effects of the Pedicle screw-Rod configuration as a novel external fixation method in canine tibial osteotomy.Methods:With ethics approval,eight healthy,intact male dogs,aged 10-12 months and weighing between 20 and 22 kg,underwent a minimally invasive medial tibial approach for surgical fixation of tibial osteotomy using a Pedicle screw-Rod configu-ration.Postoperative evaluations included ultrasound assessments at the osteotomy site and histological evaluations at the bone-screw interface.Results:B-mode ultrasound evaluation indicated healing progress at all osteotomy sites.The color Doppler examination revealed an initial increase in signals in the sur-rounding soft tissue during the first 4 weeks post-operation,followed by a decrease in signals within the adjacent soft tissue between the 5th and 8th weeks.During this latter period,the signals were primarily concentrated on the bone surface and the callus.The bone-screw interface at various screw sites exhibited similar histological changes,indicating effective integration of the newly formed woven bone into the screw threads.Conclusions:Fixation of non-articular tibial osteotomy with Pedicle screw-Rod con-figuration resulted in secondary bone healing,characterized by abundant callus for-mation and neovascularization.This implant demonstrated favorable biocompatibility with bone and surrounding soft tissue,without significant complications.
文摘The Gabes aquifer system,located in southeastern Tunisia,is a crucial resource for supporting local socio-economic activities.Due to its dual porosity structure,is particularly vulnerable to pollution.This study aims to develop a hybrid model that combines the Fracture Aquifer Index(FAI)with the conventional GOD(Groundwater occurrence,Overall lithology,Depth to water table)method,to assess groundwater vulnerability in fractured aquifer.To develop the hybrid model,the classical GOD method was integrated with FAI to produce a single composite index.Each parameter within both GOD and FAI was scored,and a final index was calculated to delineate vulnerable areas.The results show that the study area can be classified into four vulnerability levels:Very low,low,moderate,and high,indicating that approximately 8%of the area exhibits very low vulnerability,29%has low vulnerability,25%falls into the moderate category,and 38%is considered highly vulnerable.The FAI-GOD model further incorporates fracture network characteristics.This refinement reduces the classification to three vulnerability classes:Low,medium,and high.The outcomes demonstrate that 46%of the area is highly vulnerable due to a dense concentration of fractures,while 17%represents an intermediate zone characterized by either shallow or deeper fractures.In contrast,37%corresponds to areas with lightly fractured rock,where the impact on vulnerability is minimal.Multivariate statistical analysis was employed using Principal Components Analysis(PCA)and Hierarchical Cluster Analysis(HCA)on 24 samples across six variables.The first three components account for over 76%of the total variance,reinforcing the significance of fracture dynamics in classifying vulnerability levels.The FAI-GOD model removes the very-low-vulnerability class and expands the spatial extent of low-and high-vulnerability zones,reflecting the dominant influence of fracture networks on aquifer sensitivity.While both indices use a five-class system,FAI-GOD redistributes vulnerability by eliminating very-low-vulnerability areas and amplifying low/high categories,highlighting the critical role of fractures.A strong correlation(R2=0.94)between the GOD and FAI-GOD indices,demonstrated through second-order polynomial regression,confirms the robustness of the FAI-GOD model in accurately predicting vulnerability to pollution.This model provides a useful framework for assessing the vulnerability of complex aquifers and serves as a decision-making tool for groundwater managers in similar areas.
文摘BACKGROUND Ankle fractures are well-documented in snow sports,but concomitant Achilles tendon and peroneal tendon ruptures are rare.This case report presents a previously unreported combination of Achilles tendon rupture,peroneal tendon rupture,and fibular fracture in a snowboarder,highlighting the complex nature of diagnosis,management,and rehabilitation.CASE SUMMARY A 50-year-old male snowboarder presented with severe right ankle pain following a high speed tumbling crash.Initial evaluation revealed an Achilles tendon rupture and a non-displaced distal lateral malleolus fracture.Subsequent magnetic resonance imaging confirmed complete tears of the Achilles tendon and both peroneus longus and brevis tendons,along with a Weber A lateral malleolus fracture.Surgical intervention included a 4-suture core Kraków repair of the Achilles tendon with calcaneal docking,open reduction and internal fixation of the distal fibula fracture,and primary repair of both peroneal tendons.Postoperatively,a modified Achilles repair protocol was implemented.At 16 weeks post-surgery,radiographs showed a well-healed fibular fracture,and physical examination confirmed intact Achilles and peroneal tendon repairs.By 6 months,the patient had regained full daily and work activities,including recreational pursuits.CONCLUSION This case underscores the importance of maintaining a high index of suspicion for concomitant injuries in high-energy ankle trauma during snow sports.Timely advanced imaging and a comprehensive surgical approach are crucial for optimal outcomes in such complex cases.
文摘Objective:To analyze the clinical application value of autologous periosteum graft combined with platelet-rich plasma(PRP)in the treatment of long bone fractures in the extremities.Methods:A total of 40 patients with long bone fractures in the extremities admitted to Santai Hospital Affiliated to North Sichuan Medical College from January 2023 to January 2025 were included,including cases of upper extremity forearm fractures and lower extremity femoral and tibial fractures.The patients were evenly divided using a random number table,with the control group undergoing open reduction and internal fixation(ORIF)combined with autologous periosteum graft,and the observation group undergoing ORIF,autologous periosteum graft,and PRP injection.Surgical indicators,complication rates,excellent fracture healing rates,functional satisfaction,and joint range of motion were compared between the two groups.Results:The surgical indicators in the observation group were similar to those in the control group(p>0.05).The complication rate in the observation group was lower than that in the control group,while the excellent fracture healing rate and functional satisfaction were higher in the observation group(p<0.05).Conclusion:Autologous periosteum graft combined with PRP technology is safe and reliable for the treatment of long bone fractures in the extremities,with satisfactory clinical outcomes.
基金approved by King Abdullah International Medical Research Center Ethics Committee(approval No.0000074524).
文摘BACKGROUND Humeral shaft fractures are common and vary by age,with high-energy trauma observed in younger adults and low-impact injuries in older adults.Radial nerve palsy is a frequent complication.Treatment ranges from nonoperative methods to surgical interventions such as intramedullary K-wires,which promote faster rehabilitation and improved elbow mobility.AIM To evaluate the outcomes of managing humeral shaft fractures using closed reduction and internal fixation with flexible intramedullary K-wires.METHODS This was a retrospective cohort study analyzing the medical records of patients with humeral shaft fractures managed with flexible intramedullary K-wires at King Abdulaziz Medical City,using non-random sampling and descriptive analysis for outcome evaluation.RESULTS This study assessed the clinical outcomes of 20 patients treated for humeral shaft fractures with intramedullary K-wires.Patients were predominantly male(n=16,80%),had an average age of 39.2 years,and a mean body mass index of 29.5 kg/m^(2).The fractures most frequently occurred in the middle third of the humerus(n=14,70%),with oblique fractures being the most common type(n=7,35%).All surgeries used general anesthesia and a posterior approach,with no intraoperative complications reported.Postoperatively,all patients achieved clinical and radiological union(n=20,100%),and the majority(n=13,65%)reached an elbow range of motion from 0 to 150 degrees.CONCLUSION These results suggest that intramedullary K-wire fixation may be an effective option for treating humeral shaft fractures,with favorable outcomes in range of motion recovery,fracture union,and a low rate of intraoperative complications.
基金supported by the National Natural Science Foundation of China(Nos.U24B6001,52421002,52474016,and 52020105001)Research on Key Technologies for Exploration and Development of Dry Geothermal Resources(No.2022DJ5503)Deep-land National Science and Technology Major Project of China(No.2024ZD1003504).
文摘The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.
基金Chongqing Education Science Planning Project.Project Name:Research on Talent Training of Community Rehabilitation Major in Higher Vocational Colleges Based on OBE Concept(Project No.:K23ZG3420222)。
文摘Objective:To analyze the improvement effect of early postoperative rehabilitation training on balance ability and quality of life in elderly patients with hip fracture.Methods:A total of 50 elderly patients with hip fracture admitted to our hospital from January 2023 to January 2024 were selected and divided into the observation group(25 cases)and the control group(25 cases)by random number table method.The control group received routine nursing,while the observation group received early rehabilitation training on the basis of routine nursing.The balance ability(Berg Balance Scale,BBS)and quality of life(SF-36)of the two groups were compared.Results:The BBS scores of the observation group at all postoperative time points were significantly higher than those of the control group(p<0.05),and the quality-of-life scores of the observation group were also significantly higher than those of the control group(p<0.05).Conclusion:Early postoperative rehabilitation training for elderly patients with hip fracture can improve their balance ability,enhance their quality of life,and reduce the incidence of postoperative complications,which is worthy of clinical promotion.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金supported by the National Key Research and Development Program(2021YFB150740401)National Natural Science Foundation of China(42202336)the CAS Pioneer Hundred Talents Program in China(Y826031C01)。
文摘Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.
基金supported by National Natural Science Foundation of China(Nos.52364004,52464005)The Youth Talent Growth Project of Guizhou Provincial Department of Education(No.Qian Jiao Ji[2024]18)+3 种基金Postgraduate Research Fund of Guizhou Province in 2024(No.2024YJSKYJJ067)Basic Research Project of Guizhou University(No.[2023]40)Guizhou Provincial Basic Research Program(Natural Science)(No.Qian Ke He Ji Chu-ZK[2024]Yi Ban011)Research Fund for Talents of Guizhou University(No.Gui Da Ren Ji He Zi(2023)24)。
文摘During the exploitation of sandstone gas reservoirs,natural fractures near the wellbore affect water infiltration and pore evolution;however,the impact mechanisms of these fractures remain unclear.This study utilized real-time nuclear magnetic resonance(RT-NMR)technology to investigate the influence of near-wellbore fracture angle(a)at 0°,15°,30°,and 45°on water infiltration,migration patterns,and pore evolution mechanisms during water injection.Throughout the experiments,T_(2)curves and magnetic resonance imaging(MRI)were monito red in real time during the water injection process.The pore evolution and water infiltration were translated by the evolution of T_(2)curves and MRI.The results show that increasing injection pressure(P_(inj))transforms adsorption pores into seepage pores,leading to enhanced pore damage.Pore damage predominantly occurs during the rapid pressurization stage and is concentrated around the near-wellbore fracture.The maximum infiltration area and rate were observed at α=0°,while the minimum values occurred at α=45°,which can be attributed to the significant influence of a on water infiltration and migration pathways.The increasing inclination of the infiltration front with a is attributed to the fact that the rate of water infiltration along the fracture wall is always higher than that at the fracture tip.In field fracturing,it is recommended to adjust the perforation direction to align with the natural fracture orientation and optimize pressurization strategies by reducing the slow pressurization duration while extending the rapid pressurization stage.These findings can provide important guidance for setting fracturing sections and optimizing injection parameters in sandstone gas reservoir exploitation.
基金funded by the Ministry of Science and Higher Education of the Russian Federation(Project No.FSNM-2023-0005).
文摘Many new and developed oilfields are confined to carbonate reservoirs with a complex void space structure.In this study,the behavior of carbonates as a function of decreased reservoir pressure was examined.The study was based on actual production data from wells rather than just on model data or results from computational experiments.Well-test data(170 well tests)and laboratory core samples(45 samples)results were used in the analysis.The problem of reservoir deformation has been compre-hensively addressed at the micro and macro levels.The effect of reservoir permeability throughout the entire reservoir volume on reservoir pressure was determined.With a decline in reservoir pressure,the permeability of fractures and pores in carbonates decreases.The deformation coefficients,which char-acterize the actual rate of decrease in permeability with decreasing reservoir pressure,were also calculated.The deformation coefficients and data from core studies using μ-CT and SEM were compared.Based on micro-CT data,the effective diameters of the voids were calculated to be 93μm,109μm,and 140μm for the Vinnikovskoe,Sofinskoe,and Sukharev fields,respectively.Based on μ-CT and SEM data,the predominant geometric shapes of the voids were assessed.The deformation coefficient of voids was found to depend on their size and geometric shape.The study's findings revealed deformation co-efficients of 0.172,0.205,and 0.748 for the Vinnikovskoe,Sofinskoe,and Sukharev fields,respectively.Maximum deformation coefficients are typical for large voids with a predominant slot-like shape.However,even with the predominance of primary spherical voids in carbonates,the permeability of voids decreases with decreasing reservoir pressure.
基金funded by the project of the Major Scientific and Technological Projects of CNOOC in the 14th Five-Year Plan(No.KJGG2022-0701)the CNOOC Research Institute(No.2020PFS-03).
文摘To analyze the differences in the transport and distribution of different types of proppants and to address issues such as the short effective support of proppant and poor placement in hydraulically intersecting fractures,this study considered the combined impact of geological-engineering factors on conductivity.Using reservoir production parameters and the discrete elementmethod,multispherical proppants were constructed.Additionally,a 3D fracture model,based on the specified conditions of the L block,employed coupled(Computational Fluid Dynamics)CFD-DEM(Discrete ElementMethod)for joint simulations to quantitatively analyze the transport and placement patterns of multispherical proppants in intersecting fractures.Results indicate that turbulent kinetic energy is an intrinsic factor affecting proppant transport.Moreover,the efficiency of placement and migration distance of low-sphericity quartz sand constructed by the DEM in the main fracture are significantly reduced compared to spherical ceramic proppants,with a 27.7%decrease in the volume fraction of the fracture surface,subsequently affecting the placement concentration and damaging fracture conductivity.Compared to small-angle fractures,controlling artificial and natural fractures to expand at angles of 45°to 60°increases the effective support length by approximately 20.6%.During hydraulic fracturing of gas wells,ensuring the fracture support area and post-closure conductivity can be achieved by controlling the sphericity of proppants and adjusting the perforation direction to control the direction of artificial fractures.
基金supported by the National Science and Technology Major Project of China (Nos. 2011ZX05025-002-02-05)the National Natural Science Foundation of China (Nos. 41202086, 41202087, 41102068)
文摘The large reef complexes of the Upper Permian Changxing Formation, with a significant breakthrough for petroleum exploration, are an important target for petroleum exploration in the Yuanba area of the Sichuan Basin in SW China. The storage space types of reef complexes are dominated by the dissolved pore-fracture（DPF）. However, using only single geophysical methods, it is difficult to predict effective distribution of DPF. Based on a combination of geological models and geophysics technology, this study proposes two new geophysical methods, including anisotropy coherence technique（ACT） and fracture intensity inversion（FII）, to research the characteristics of DPF by faciescontrolling in Changxing Formation in Yuanba area. Two major findings are presented as follows：（1） the characteristics of DPF varying with facies are the result of different diagenetic and petrophysical property. The intensity of DPF decreases from reef and bioclastic bank to interbank sea and slope;（2） ACT can qualitatively identify the distribution of DPF with no-directional and dispersed distribution, while FII can quantitatively characterize the intensity of DPF development within various sedimentary facies. When integrated into the geological study, ACT and FII can provide an effective way to predict the distribution of DPF in similar geological settings and the predicted DPF have been supported by the historical well data.
基金in major projects of Henan Province University Science and Technology Innovation Talent Support Program of China (No. 15HASTIT050)Funding Scheme for Henan Province the Young Key Teachers (No. 2013GGJS-049) of ChinaScience and Technology Department of Henan Province of China (No. 142102210050)
文摘There are millimeter, micron and nanometer scales of pores and fractures in coal to describe different scales of coal pores and fissures communicating path and to quantitatively characterize their permeability. Such information provides an important basis for studying coalbed methane output mechanism. The pores and fissures in a large number of coal samples were observed and counted by scanning electron microscopy and optical microscopy. The probability distribution models of pore-fissure network were then established. Different scales of pore-fissures 2D network models were reconstructed by Monte Carlo method. The 2D seepage models were obtained through assignment zero method and using Matlab software. The effect of permeability on different scale pore-fractures network was obtained by two-dimensional seepage equation. Predicted permeability is compared with the measured ones. The results showed that the dominant order of different scale pore-fractures connected path from high to low is millimeter-sized fractures, seepage pores and micron-size fractures. The contribution of coal reservoir permeability from large to small is millimeter-size fractures, micron-size fractures and seepage pores. Different parameters in different scale pore-fractures are of different influence permeability.Reconstruction of different scale pore-fractures network can clearly display the connectivity of porefractures, which can provide a basis for selecting migration path and studying gas flow pattern.
基金supported by the National Natural Science Foundation of China(Grant No.52104060)the Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QE015).
文摘The real-time monitoring of fracture propagation during hydraulic fracturing is crucial for obtaining a deeper understanding of fracture morphology and optimizing hydraulic fracture designs.Accurate measurements of key fracture parameters,such as the fracture height and width,are particularly important to ensure efficient oilfield development and precise fracture diagnosis.This study utilized the optical frequency domain reflectometer(OFDR)technique in physical simulation experiments to monitor fractures during indoor true triaxial hydraulic fracturing experiments.The results indicate that the distributed fiber optic strain monitoring technology can efficiently capture the initiation and expansion of fractures.In horizontal well monitoring,the fiber strain waterfall plot can be used to interpret the fracture width,initiation location,and expansion speed.The fiber response can be divided into three stages:strain contraction convergence,strain band formation,and postshutdown strain rate reversal.When the fracture does not contact the fiber,a dual peak strain phenomenon occurs in the fiber and gradually converges as the fracture approaches.During vertical well monitoring in adjacent wells,within the effective monitoring range of the fiber,the axial strain produced by the fiber can represent the fracture height with an accuracy of 95.6%relative to the actual fracture height.This study provides a new perspective on real-time fracture monitoring.The response patterns of fiber-induced strain due to fractures can help us better understand and assess the dynamic fracture behavior,offering significant value for the optimization of oilfield development and fracture diagnostic techniques.
基金National Key Research and Development Program of China (No.2021YFC3100800)the National Natural Science Foundation of China (Nos.42407235 and 42271026)+1 种基金the Project of Sanya Yazhou Bay Science and Technology City (No.SCKJ-JYRC-2023-54)supported by the Hefei advanced computing center
文摘Coral reef limestone(CRL)constitutes a distinctive marine carbonate formation with complex mechanical properties.This study investigates the multiscale damage and fracture mechanisms of CRL through integrated experimental testing,digital core technology,and theoretical modelling.Two CRL types with contrasting mesostructures were characterized across three scales.Macroscopically,CRL-I and CRL-II exhibited mean compressive strengths of 8.46 and 5.17 MPa,respectively.Mesoscopically,CRL-I featured small-scale highly interconnected pores,whilst CRL-II developed larger stratified pores with diminished connectivity.Microscopically,both CRL matrices demonstrated remarkable similarity in mineral composition and mechanical properties.A novel voxel average-based digital core scaling methodology was developed to facilitate numerical simulation of cross-scale damage processes,revealing network-progressive failure in CRL-I versus directional-brittle failure in CRL-II.Furthermore,a damage statistical constitutive model based on digital core technology and mesoscopic homogenisation theory established quantitative relationships between microelement strength distribution and macroscopic mechanical behavior.These findings illuminate the fundamental mechanisms through which mesoscopic structure governs the macroscopic mechanical properties of CRL.
基金the Australian Research Council Discovery Project(ARC DP 220100851)scheme and would acknowledge that.
文摘Particle-fluid two-phase flows in rock fractures and fracture networks play a pivotal role in determining the efficiency and effectiveness of hydraulic fracturing operations,a vital component in unconventional oil and gas extraction.Central to this phenomenon is the transport of proppants,tiny solid particles injected into the fractures to prevent them from closing once the injection is stopped.However,effective transport and deposition of proppant is critical in keeping fracture pathways open,especially in lowpermeability reservoirs.This review explores,then quantifies,the important role of fluid inertia and turbulent flows in governing proppant transport.While traditional models predominantly assume and then characterise flow as laminar,this may not accurately capture the complexities inherent in realworld hydraulic fracturing and proppant emplacement.Recent investigations highlight the paramount importance of fluid inertia,especially at the high Reynolds numbers typically associated with fracturing operations.Fluid inertia,often overlooked,introduces crucial forces that influence particle settling velocities,particle-particle interactions,and the eventual deposition of proppants within fractures.With their inherent eddies and transient and chaotic nature,turbulent flows introduce additional complexities to proppant transport,crucially altering proppant settling velocities and dispersion patterns.The following comprehensive survey of experimental,numerical,and analytical studies elucidates controls on the intricate dynamics of proppant transport under fluid inertia and turbulence-towards providing a holistic understanding of the current state-of-the-art,guiding future research directions,and optimising hydraulic fracturing practices.
