The synthesis of polyurethanes(PUs)from the reaction of low molecular weight poly(ethylene carbonate)diol(PECD)is rarely investigated.This work reports a novel PU with excellent mechanical properties from the solution...The synthesis of polyurethanes(PUs)from the reaction of low molecular weight poly(ethylene carbonate)diol(PECD)is rarely investigated.This work reports a novel PU with excellent mechanical properties from the solution polymerization of 4,4-diphenylmethane diisocyanate(MDI)with PECD that was derived from the copolymerization of carbon dioxide(CO_(2))and ethylene oxide(EO).The tensile strength,the elongation at break and 300%constant tensile strength of the PECD-PU were up to 66±2 MPa,880%±50%and 13 MPa,respectively,higher than the control PUs from the reaction of MDI with commercial polyethers or polyesters.The PECD-PU with high CO_(2) carbonate content exhibited good solvent resistance and chemical stability.Of importance,the mechanical properties and chemical resistance of PECD-PU were significantly enhanced with the increasing content of CO_(2),i.e.,the carbonate unit in PECD.This work provides comprehensive properties of PECD-derived PUs,indicating that PECD is a competitive precursor for the preparation of PU and has broad application prospects.展开更多
Polyurethanes consisting of tri-functional homopolymer of hexamethylene diisocyanate （tri-HDI） and polyethylene glycol （PEG） are synthesized, in which photo-reversible coumarin moieties act as pendant groups. Acco...Polyurethanes consisting of tri-functional homopolymer of hexamethylene diisocyanate （tri-HDI） and polyethylene glycol （PEG） are synthesized, in which photo-reversible coumarin moieties act as pendant groups. Accordingly, the polyurethanes can be repeatedly self-healed under UV lights at room temperature by taking advantages of the photodimerization and photocleavage habits of coumarin. Molecular weight of the soft segment, PEG, is found to be closely related to the healing performance of the polyurethanes. Lower molecular weight PEG that corresponds to higher initial coumarin concentration in the polymer is critical for obtaining higher healing efficiency in the case of the first healing action. Nevertheless, it does not guarantee high reversibility of the photo-remendability during the repeated healing events. In contrast, the polyurethane with moderate molecular weight PEG has achieved balanced performance. Reaction kinetics is less important for the healing effect.展开更多
Polyurethanes（PU） were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU（PSU） was obtained through reaction of the PU p...Polyurethanes（PU） were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU（PSU） was obtained through reaction of the PU prepolymers with bis（3-（1-methoxy-2-hydroxypropoxy）propyl） terminated polysiloxanes（PMTS） of different molecular weight,specifically designed for this purpose.Results showed that,with increases in molecular weight of PMTS and its content,viscosity of the final PSU latexes decreased;phase separation of the incorporated PMTS in PSU films increased;the average particle sizes of the latexes varied between 110 nm and 330 nm,and the surface tension in the final latexes was relatively constant regardless of PMTS amount and its molecular weight.It was likely that copolymerized polysiloxanes had trend to enrich on top of the film when PMTS molecular weight was around 2000 and its content above 5 wt%.In general, PMTS modified polyurethane films showed higher performance than those from unmodified waterborne polyurethane latexes.展开更多
Waterborne polyurethane composites containing silica nanoparticles are synthesized successfully via the in situ polymerization. The structure, thermal stability, surface hardness, tensile strength, UV-Vis absorbance, ...Waterborne polyurethane composites containing silica nanoparticles are synthesized successfully via the in situ polymerization. The structure, thermal stability, surface hardness, tensile strength, UV-Vis absorbance, dynamic mechanical properties and chemicals resistance of the resulting composites are investigated by FTIR, TEM, TGA, UV-Vis, DMA and chemicals soakage measurements. Results show that polyurethane molecules and silica nanoparticles are linked with covalent bonds. As a result, physical properties of polyurethane composites, such as thermal stability, surface hardness, weather and chemicals resistance are all improved when an appropriate concentration of silica nanoparticles are incorporated.展开更多
Soy-protein isolate(SPI)was used to prepare non-isocyanate polyurethane(NIPU)thermosetting adhesives for wood panels by reacting it with dimethyl carbonate(DMC)and hexamethylene diamine.Both linear as well as branched...Soy-protein isolate(SPI)was used to prepare non-isocyanate polyurethane(NIPU)thermosetting adhesives for wood panels by reacting it with dimethyl carbonate(DMC)and hexamethylene diamine.Both linear as well as branched oligomers were obtained and identified,indicating how such oligomer structures could further cross-link to form a hardened network.Unusual structures were observed,namely carbamic acid-derived urethane linkages coupled with lactam structures.The curing of the adhesive was followed by thermomechanical analysis(TMA).It appeared to follow a two stages process:First,at a lower temperature(maximum 130℃),the growth of linear oligomers occurred,finally forming a physically entangled network.This appeared to collapse and disentangle,causing a decrease of MOE,as the temperature increases.This appears to be due to the ever more marked Brownian movements of the linear oligomer chains with the increase of the temperature.Second,chemical cross-linking of the chains appeared to ensue,forming a hardened network.This was shown by the thermomechanical analysis(TMA)showing two distinct MOE maxima peaks,one around 130℃ and the other around 220℃,with a very marked MOE decrease between the two.Plywood panels were prepared and bonded with the SPI-NIPU wood adhesive and the results obtained are presented.The adhesive appeared to pass comfortably the requirements for dry strength of relevant standards,showing to be suitable for interior grade plywood panels.It did not pass the requirements for wet tests.However,addition of 15%of glycerol diglycidyl ether improved the wet tests results but still not enough to satisfy the standards requirements.展开更多
The reaction of a desulphurized kraft lignin with hexamethylene diamine and dimethyl carbonate has allowed the development of isocyanate-free polyurethane resins.The present research work is based on previous studies ...The reaction of a desulphurized kraft lignin with hexamethylene diamine and dimethyl carbonate has allowed the development of isocyanate-free polyurethane resins.The present research work is based on previous studies made with hydrolyzable and condensed tannins,but takes advantage of the higher number of hydroxyl groups present in lignin and their different aliphatic and aromatic character.The obtained materials were analyzed by Fourier transform infrared(FTIR)spectroscopy,matrix-assisted laser desorption ionization time-of-flight(MALDI-TOF)mass spectrometry and solid-state cross-polarization/magic angle spinning(CP MAS)13C nuclear magnetic resonance(NMR),which have revealed the presence of urethane functions.The interpretation of the results has shown a larger number of species than when tannins were used and has indicated the presence of two types of bonds in the new molecules formed:ionic and covalent bonds.展开更多
A series of fluorinated phosphatidylcholine polyurethane macromolecular additives were synthesized by solution polymerization using methylenebis（phylene isocyanates） （MDI） and 1,4-butanediol （BDO） as hard segmen...A series of fluorinated phosphatidylcholine polyurethane macromolecular additives were synthesized by solution polymerization using methylenebis（phylene isocyanates） （MDI） and 1,4-butanediol （BDO） as hard segments, a new phoshporycholine, 2-（2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluoro-10-（2-hydroxyethoxy）decyloxy） ethyl phosphorycholine （HDFOPC） as end-capper, and four polydiols, poly（tetramethylene glycol）s （PTMG）, polydimethylsiloxane （PDMS）, poly（1,6-hexyl-1,5-pentylcarbonate） （PHPC） and poly（propylene glycol） （PPG） as soft segments, respectively. The chemical structures of the synthesized polyurethanes were characterized by 1H-NMR and FTIR. DSC and DMA were employed to study the phase behavior of these novel polyurethanes due to their great influences on the surface properties, and hence their interactions with bio-systems. The results showed that phase separation of the fluorinated phosphatidylcholine end-capped polyurethanes was increased in comparison with that of normal polyurethanes. The effect of fluorinated phosphatidylcholine end-capped groups on the phase behavior was further demonstrated by analyzing the degree of hydrogen-bonding between hard and soft segments.展开更多
The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted ...The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.展开更多
Non-isocyanate polyurethane(NIPU)foams from a commercial hydrolysable tannin extract,chestnut wood tannin extract,have been prepared to determine what chemical species and products are taking part in the reactions inv...Non-isocyanate polyurethane(NIPU)foams from a commercial hydrolysable tannin extract,chestnut wood tannin extract,have been prepared to determine what chemical species and products are taking part in the reactions involved.This method is based on two main steps:the reaction with dimethyl carbonate and the formation of urethane bonds by further reaction of the carbonated tannin with a diamine-like hexamethylene diamine.The hydroxyl groups on the tannin polyphenols and on the carbohydrates intimately linked with it and part of a hydrolysable tannin are the groups involved in these reactions.The carbohydrate skeleton of the hydrolysable tannin is also able to participate through its hydroxyl groups to the same two reactions rendering the whole molecular complex able to react to form NIPUs.The analysis by Matrix-Assisted Laser Desorption Ionization(MALDI-TOF)mass spectrometry and 13C Nuclear Magnetic Resonance(13C NMR)to further investigate the reaction mechanisms involved revealed the unsuspected complexity of chestnut hydrolysable tannin,with different fragments reacting in different manners forming a hardened network of considerable complexity.As the morphology and performance of these types of foams changes slightly with the change in the amount of glutaraldehyde and hexamine hardeners,the best performing foam formulation previously determined was scanned by SEM and analysed chemically for the structures formed.展开更多
Polyols are groups of organic compounds which contain carbon and are randomly linked to other atoms,especially carbon-carbon and carbon-hydrogen.These compounds are mainly used as reactants to make other polymers.Amon...Polyols are groups of organic compounds which contain carbon and are randomly linked to other atoms,especially carbon-carbon and carbon-hydrogen.These compounds are mainly used as reactants to make other polymers.Among biopolymers,lignin is regarded as the base of a new polymer in polyol construction.The present study aimed to investigate the effects of amine type(diethylenetriamine and ethylenediamine)on the modification of lignin-based polyols,so as to provide an alternative to petroleum polyols and,in turn,increase functional groups and reduce their harm to humans’health and the environment.To this aim,first,lignin was extracted from raw liquor.Next,the extracted lignin was reacted with diethylenetriamine(DETA)and ethylenediamine(EDA).Finally,the Mannich method was used for the reaction between amine lignin and propylene carbonate.The results of the Fourier Transform Infrared(FTIR)spectroscopy analysis showed that modification with DETA led to more structural change in lignin and peak 1100 indicates the presence of C–O bond related to urethane bonds in modified lignin.Moreover,adding propylene carbonate to aminated lignin did not result in much change in the results of the FTIR analysis.Additionally,urethane bonds can be seen in the results of GPC at 400℃–500℃.Furthermore,a slight decrease in thermal stability was observed in lignin modified with amine and propylene carbonate,compared to the raw lignin sample.展开更多
A simple non-isocyanate route synthesizing thermoplastic polyurethanes（TPUs） with good thermal and mechanical properties is described. Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate wi...A simple non-isocyanate route synthesizing thermoplastic polyurethanes（TPUs） with good thermal and mechanical properties is described. Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate with 1,4-butanediol and 1,6-hexanediol was conducted at different molar ratios under the catalysis of tetrabutyl titanate. A series of crystallizable non-isocyanate TPUs with high molecular weight were prepared. The TPUs were characterized by gel permeation chromatography, FT-IR, 1 H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X-ray diffraction, AFM, and tensile tests. The TPUs exhibited Mn ranging from 12 500 to 26 400 g/mol, Mw from 16 700 to 56 400 g/mol, Tm up to 151.4 °C, and initial decomposition temperature over 241.8 °C. Their tensile strength reached 42.99 MPa with a strain at break of 30.00%. TPUs constructed simply with butylene, hexylene, and urethane linkages were successfully synthesized through a non-isocyanate route.展开更多
Biodegradable porous polyurethanes scaffold have themselves opportunities in service, in-cluding controlled degradation rate, no-toxic degradation products. However, polyurethanes are lack of bioactive groups, which l...Biodegradable porous polyurethanes scaffold have themselves opportunities in service, in-cluding controlled degradation rate, no-toxic degradation products. However, polyurethanes are lack of bioactive groups, which limits their application. This review gives the common modification methods, surface functionalization and blending modification. In finally, the review puts forward to the bulk modification as a new method to enhance the bioactivity of polyure-thanes.展开更多
In the paper, a new biodegradable polyurethane（PU, PU-I） was prepared： the prepolymer was synthesized via bulk ring-opening polymerization with poly（ethylene glycol）（M_n= 600）（PEG600） as an initiator and L-la...In the paper, a new biodegradable polyurethane（PU, PU-I） was prepared： the prepolymer was synthesized via bulk ring-opening polymerization with poly（ethylene glycol）（M_n= 600）（PEG600） as an initiator and L-lactide（L-LA）, e-caprolactone（CL） as monomers, and the prepolymer was chain-extended with an isocyanate-terminated urethane triblock（macrodiisocyanate） to prepare the PU. The macrodiisocyanate, prepolymer and PUs were characterized by^1H NMR,^（13）C NMR, FT-IR, high resolution mass spectrometry（HR-MS）, gel permeation chromatography（GPC）, thermo gravimetric analysis（TGA）,and differential scanning calorimetry（DSC）. The corresponding PU films showed excellent mechanical properties with a tensile strength of 27.5 MPa and an elongation at break of 996%, and also maintained mechanical properties in physiological saline at 37℃ for more than three weeks, which appeared to be more suitable for biomedical applications.展开更多
In this study, a novel three functional chain extender （TATATRIOL） was synthesized from the reaction of 1,3,5- tri（prop-2-en-1-yl）-1,3,5-triazinane-2,4,6-trione （TATA） with 2-sulfanylethanol. Then new thermoplas...In this study, a novel three functional chain extender （TATATRIOL） was synthesized from the reaction of 1,3,5- tri（prop-2-en-1-yl）-1,3,5-triazinane-2,4,6-trione （TATA） with 2-sulfanylethanol. Then new thermoplastic polyurethanes （TPUs） were synthesized by a one-step bulk polymerization from the reaction of 1,1＇-methanediylbis（4- isocyanatocyclohexane） （H12MDI）, a poly（ethylene adipate） based polyester polyol and a chain extender. Butane-l,4-diol （BD） and the newly synthesized monomer, TATATRIOL, were used as chain extenders. The effects of TATATRIOL on the properties of the TPU were investigated and compared to those of the TPU prepared with BD. The TPUs which derived from the sulfur containing chain extender displayed lower modulus and high elongation at break values than the analogous TPUs derived from BD. Moreover sulfur containing TPUs exhibited higher thermal stability.展开更多
Spectroscopic studies have revealed that the amount of polyureas formed and the kinetics of their formation in soy based polyurethane systems are considerably different from traditional systems employing ethylene oxid...Spectroscopic studies have revealed that the amount of polyureas formed and the kinetics of their formation in soy based polyurethane systems are considerably different from traditional systems employing ethylene oxide-propylene oxide (EO-PO) based polyols.The aggregation of polyureas was characterized by the hydrogen bonds formed utilizing FTIR spectroscopy.This study offered the opportunity to assign the previously undefined infrared features.The structural transformation is reflected in the segmental rel...展开更多
Film specimens of four segmented polyurethanes with different soft segments, namely polycaprolactone, polytetramethylene adipate, polytetramethylene oxide and polypropylene oxide, and their blends with PVC of differen...Film specimens of four segmented polyurethanes with different soft segments, namely polycaprolactone, polytetramethylene adipate, polytetramethylene oxide and polypropylene oxide, and their blends with PVC of different compositions were obtained by solution cast. The permeability of these films to O_2, N_2 and H_2 and their density were measured by using gas chromatography and technique of density gradient column. The polyether polyurethanes were found to have higher permeability than the polyester ones due to their low glass transition temperature and /or the low density value. The blends of PVC and polyether polyurethanes, especially the PPO-based polyurethane, are incompatible, and their permeability coefficient-composition dependence has the typical S-shaped curves. PVC is well compatible with the soft segments in its blends with polyester polyurethanes. For these blends the composition dependence of permeability is characterized by a negative deviation from the semilogarithmic additivity rule, and it is possible to prepare blends having T_g 20℃ lower than that of PVC, but retaining its low permeability almost unchanged, results were discussed in according with the different approaches for the permeation behavior of compatible and incompatible blends.展开更多
A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segme...A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segment spherulites have been observed in compression molded specimens of all of the samples except the one of the lowest hard segment content. The difficulty in sphernlite formation was explained as only in a small temperature range,the microphase separation rate may be faster than the crystallization rate and all these processes are very slow due to the hydrogen bonding between hard and soft segments and the interactions between hard segments themselves. PCL soft segments of molecular weight 1500 is still crystallizable and may form different crystalline superstructures.展开更多
This paper presents the implementation of two multicriteria optimization methods based on different approaches, namely, Rough Set Method (RSM) and Net Flow Method (NFM), to the manufacture by reactive extrusion of lin...This paper presents the implementation of two multicriteria optimization methods based on different approaches, namely, Rough Set Method (RSM) and Net Flow Method (NFM), to the manufacture by reactive extrusion of linear thermoplastic polyurethanes (TPUs), appropriate for medical applications. A preliminary study allowed determining the process operating conditions for which the polymerization time and the average residence time of the reactants in the extruder are of the same order of magnitude. Prior to the optimization, a neural network model able to predict with acceptable accuracy the effect of the operating conditions on the output process variables, was constructed and validated. This model was then used to determine, using Pareto’s concept, a set of non-dominated solutions constituting Pareto’s domain. These solutions were then ranked according to the preferences of a decision maker using NFM and RSM. This allowed providing the 10% highest ranked solutions of Pareto’s domain and proposing a set of optimal operating conditions for the production, with the lowest energy consumption, of TPUs with targeted properties and high purity. Experimental validation runs carried out under similar operating conditions gave rise to criteria values confirming the su- perior performance of NFM, without rejecting, at the same time, the values obtained using RSM.展开更多
Silane terminated prepolymers for adhesives, sealants and coatings are of <span style="font-family:"">great industrial importance. They are very important because of their low toxicity over polyur...Silane terminated prepolymers for adhesives, sealants and coatings are of <span style="font-family:"">great industrial importance. They are very important because of their low toxicity over polyurethanes, silicones, and solvent-based products. Hence, many pieces of literature which deal with the synthesis, properties and applications of this Silane terminated polymers hybrid system exist. Silylated polyether (MS polymers) and Silylated Polyurethane Polymers (SPUR) are the bases for numerous sealants, adhesives and coatings used worldwide. A hybrid system mixed with organic-polyurethane proportion and inorganic-alkoxysilane proportion combines the benefits of conventional polyurethane and silicone-based products. This article reviews the chemistry of MS polymers and SPUR and their advantages and disadvantages in silyl terminated prepolymer-based adhesives, sealants and coatings as well as provides information on different end applications.展开更多
To better investigate the degradation and biocompatibility of waterborne biodegradable polyurethanes for tissue engineering, a series of new waterborne biodegradable polyurethanes （PEGPUs） with low degree of crossli...To better investigate the degradation and biocompatibility of waterborne biodegradable polyurethanes for tissue engineering, a series of new waterborne biodegradable polyurethanes （PEGPUs） with low degree of crosslinking was synthesized using IPDI, BDO and L-lysine as hard segments, PCL and PEG as soft segment. The bulk structures and properties of the prepared polyurethanes were characterized by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC）, tensile mechanical tests and water contact angle （WCA） measurements. The degree of microphase separation was slightly improved because of the lowered crosslinking degree of these PEGPUs in comparison with the high cross-linking degree samples, leading to good mechanical properties, as indicated by DSC and stress-strain data. Moreover, biodegradability of the polyurethanes was evaluated in phosphate buffer solutions （PBS） under different pH values and enzymatic solution at pH 7.4 through weight loss monitoring. The results suggested that the degradation of these PEGPUs was closely related to their bulk and surface properties. And the degradation products didn＇t show apparent inhibition effect against fibroblasts in vitro. These studies demonstrated that the waterborne biodegradable polyurethanes could find potential use in soft tissue engineering and tissue regeneration.展开更多
基金financially supported by the Maoming Science and Technology Bureau(No.2022DZXHT007)。
文摘The synthesis of polyurethanes(PUs)from the reaction of low molecular weight poly(ethylene carbonate)diol(PECD)is rarely investigated.This work reports a novel PU with excellent mechanical properties from the solution polymerization of 4,4-diphenylmethane diisocyanate(MDI)with PECD that was derived from the copolymerization of carbon dioxide(CO_(2))and ethylene oxide(EO).The tensile strength,the elongation at break and 300%constant tensile strength of the PECD-PU were up to 66±2 MPa,880%±50%and 13 MPa,respectively,higher than the control PUs from the reaction of MDI with commercial polyethers or polyesters.The PECD-PU with high CO_(2) carbonate content exhibited good solvent resistance and chemical stability.Of importance,the mechanical properties and chemical resistance of PECD-PU were significantly enhanced with the increasing content of CO_(2),i.e.,the carbonate unit in PECD.This work provides comprehensive properties of PECD-derived PUs,indicating that PECD is a competitive precursor for the preparation of PU and has broad application prospects.
基金financially supported by the National Natural Science Foundation of China(Nos.51333008,51273214 and 51073176)the project of key technological breakthrough for emerging industries of strategic importance(Nos.2011A091102001,and 2011A091102003)+2 种基金the Science and Technology Program of Guangdong Province(Nos.2010B010800021 and 2010A011300004)the Basic Scientific Research Foundation in Colleges and Universities of Ministry of Education of China(No.12lgjc08)the ST project of Hongyun Honghe Tobacco Group(No.HYHH2013YL06)
文摘Polyurethanes consisting of tri-functional homopolymer of hexamethylene diisocyanate （tri-HDI） and polyethylene glycol （PEG） are synthesized, in which photo-reversible coumarin moieties act as pendant groups. Accordingly, the polyurethanes can be repeatedly self-healed under UV lights at room temperature by taking advantages of the photodimerization and photocleavage habits of coumarin. Molecular weight of the soft segment, PEG, is found to be closely related to the healing performance of the polyurethanes. Lower molecular weight PEG that corresponds to higher initial coumarin concentration in the polymer is critical for obtaining higher healing efficiency in the case of the first healing action. Nevertheless, it does not guarantee high reversibility of the photo-remendability during the repeated healing events. In contrast, the polyurethane with moderate molecular weight PEG has achieved balanced performance. Reaction kinetics is less important for the healing effect.
基金supported by the National Natural Science Foundation of China(No.20874040)Research Funds from University of Jinan(XKY0721)
文摘Polyurethanes（PU） were prepared using toluene diisocyanate,polypropylene glycol,ethylene glycol, dimethylolpropionic acid and triethylamine,and a siloxane modified PU（PSU） was obtained through reaction of the PU prepolymers with bis（3-（1-methoxy-2-hydroxypropoxy）propyl） terminated polysiloxanes（PMTS） of different molecular weight,specifically designed for this purpose.Results showed that,with increases in molecular weight of PMTS and its content,viscosity of the final PSU latexes decreased;phase separation of the incorporated PMTS in PSU films increased;the average particle sizes of the latexes varied between 110 nm and 330 nm,and the surface tension in the final latexes was relatively constant regardless of PMTS amount and its molecular weight.It was likely that copolymerized polysiloxanes had trend to enrich on top of the film when PMTS molecular weight was around 2000 and its content above 5 wt%.In general, PMTS modified polyurethane films showed higher performance than those from unmodified waterborne polyurethane latexes.
基金supported by the Open Fund of Key Laboratory of Road & Bridge and Underground Engineering of Gansu Province(No.Kfjj-10-05)"Qing Lan" Talent Engineering Funds by Lanzhou Jiaotong University(No.QL-08- 03A)
文摘Waterborne polyurethane composites containing silica nanoparticles are synthesized successfully via the in situ polymerization. The structure, thermal stability, surface hardness, tensile strength, UV-Vis absorbance, dynamic mechanical properties and chemicals resistance of the resulting composites are investigated by FTIR, TEM, TGA, UV-Vis, DMA and chemicals soakage measurements. Results show that polyurethane molecules and silica nanoparticles are linked with covalent bonds. As a result, physical properties of polyurethane composites, such as thermal stability, surface hardness, weather and chemicals resistance are all improved when an appropriate concentration of silica nanoparticles are incorporated.
文摘Soy-protein isolate(SPI)was used to prepare non-isocyanate polyurethane(NIPU)thermosetting adhesives for wood panels by reacting it with dimethyl carbonate(DMC)and hexamethylene diamine.Both linear as well as branched oligomers were obtained and identified,indicating how such oligomer structures could further cross-link to form a hardened network.Unusual structures were observed,namely carbamic acid-derived urethane linkages coupled with lactam structures.The curing of the adhesive was followed by thermomechanical analysis(TMA).It appeared to follow a two stages process:First,at a lower temperature(maximum 130℃),the growth of linear oligomers occurred,finally forming a physically entangled network.This appeared to collapse and disentangle,causing a decrease of MOE,as the temperature increases.This appears to be due to the ever more marked Brownian movements of the linear oligomer chains with the increase of the temperature.Second,chemical cross-linking of the chains appeared to ensue,forming a hardened network.This was shown by the thermomechanical analysis(TMA)showing two distinct MOE maxima peaks,one around 130℃ and the other around 220℃,with a very marked MOE decrease between the two.Plywood panels were prepared and bonded with the SPI-NIPU wood adhesive and the results obtained are presented.The adhesive appeared to pass comfortably the requirements for dry strength of relevant standards,showing to be suitable for interior grade plywood panels.It did not pass the requirements for wet tests.However,addition of 15%of glycerol diglycidyl ether improved the wet tests results but still not enough to satisfy the standards requirements.
文摘The reaction of a desulphurized kraft lignin with hexamethylene diamine and dimethyl carbonate has allowed the development of isocyanate-free polyurethane resins.The present research work is based on previous studies made with hydrolyzable and condensed tannins,but takes advantage of the higher number of hydroxyl groups present in lignin and their different aliphatic and aromatic character.The obtained materials were analyzed by Fourier transform infrared(FTIR)spectroscopy,matrix-assisted laser desorption ionization time-of-flight(MALDI-TOF)mass spectrometry and solid-state cross-polarization/magic angle spinning(CP MAS)13C nuclear magnetic resonance(NMR),which have revealed the presence of urethane functions.The interpretation of the results has shown a larger number of species than when tannins were used and has indicated the presence of two types of bonds in the new molecules formed:ionic and covalent bonds.
基金financially supported by the National Natural Science Foundation of China(No.50673063)Program for the New-Century Excellent Talents of Ministry of Education of China(NCET-08-0381)Sichuan Provincial Science Fund for Distinguished Young Scholars(09ZQ026-024)
文摘A series of fluorinated phosphatidylcholine polyurethane macromolecular additives were synthesized by solution polymerization using methylenebis（phylene isocyanates） （MDI） and 1,4-butanediol （BDO） as hard segments, a new phoshporycholine, 2-（2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluoro-10-（2-hydroxyethoxy）decyloxy） ethyl phosphorycholine （HDFOPC） as end-capper, and four polydiols, poly（tetramethylene glycol）s （PTMG）, polydimethylsiloxane （PDMS）, poly（1,6-hexyl-1,5-pentylcarbonate） （PHPC） and poly（propylene glycol） （PPG） as soft segments, respectively. The chemical structures of the synthesized polyurethanes were characterized by 1H-NMR and FTIR. DSC and DMA were employed to study the phase behavior of these novel polyurethanes due to their great influences on the surface properties, and hence their interactions with bio-systems. The results showed that phase separation of the fluorinated phosphatidylcholine end-capped polyurethanes was increased in comparison with that of normal polyurethanes. The effect of fluorinated phosphatidylcholine end-capped groups on the phase behavior was further demonstrated by analyzing the degree of hydrogen-bonding between hard and soft segments.
基金the Consejo Nacional de Investigaciones Científicas y Técnicas(CONICET,Argentina)(PIP 20170100677)the Fondo para la Investigación Científica y Tecnológica(FONCYT)(PICT-2017-1318)the Universidad Nacional de Mar del Plata(UNMdP,15/G557,ING561/19)and to the Comisión de Investigaciones Científicas de la Provincia de Buenos Aires(CIC)and the Universidad Tecnológica Nacional(UTN)for their financial support.
文摘The increasing pressure from consumers and policy makers to reduce the use of synthetic polymers,whose production contributes to the depletion of non-renewable resources and are usually non-biodegradable,has prompted the efforts to find suitable bio-based sources for the production of polymers.Vegetable oils have been a frequently spotted in this search because they are versatile,highly available and a low cost liquid biosource,which can be used in the synthesis of a wide plethora of different polymers and reactive monomers.Following the same idea of reducing the environmental stress,the traditional polyurethanes that are soluble in organic solvents have been targeted for replacement,particularly in applications such as adhesives and coatings,in which the solvent is released to the atmosphere increasing the air pollution.Instead,waterborne polyurethanes(WBPU),which are polyurethane dispersions(PUD)prepared in aqueous media,release benign water to the atmosphere during use as supported or self-standing films for different applications.In this brief review,the contributions to the development of WBPUs based on vegetable oils are discussed,focusing mainly on the contributions of the last decade.The synthesis of ionic and nonionic PUDs,their characterization and the properties of the resulting dried materials,as well as derived composite materials are considered.
文摘Non-isocyanate polyurethane(NIPU)foams from a commercial hydrolysable tannin extract,chestnut wood tannin extract,have been prepared to determine what chemical species and products are taking part in the reactions involved.This method is based on two main steps:the reaction with dimethyl carbonate and the formation of urethane bonds by further reaction of the carbonated tannin with a diamine-like hexamethylene diamine.The hydroxyl groups on the tannin polyphenols and on the carbohydrates intimately linked with it and part of a hydrolysable tannin are the groups involved in these reactions.The carbohydrate skeleton of the hydrolysable tannin is also able to participate through its hydroxyl groups to the same two reactions rendering the whole molecular complex able to react to form NIPUs.The analysis by Matrix-Assisted Laser Desorption Ionization(MALDI-TOF)mass spectrometry and 13C Nuclear Magnetic Resonance(13C NMR)to further investigate the reaction mechanisms involved revealed the unsuspected complexity of chestnut hydrolysable tannin,with different fragments reacting in different manners forming a hardened network of considerable complexity.As the morphology and performance of these types of foams changes slightly with the change in the amount of glutaraldehyde and hexamine hardeners,the best performing foam formulation previously determined was scanned by SEM and analysed chemically for the structures formed.
文摘Polyols are groups of organic compounds which contain carbon and are randomly linked to other atoms,especially carbon-carbon and carbon-hydrogen.These compounds are mainly used as reactants to make other polymers.Among biopolymers,lignin is regarded as the base of a new polymer in polyol construction.The present study aimed to investigate the effects of amine type(diethylenetriamine and ethylenediamine)on the modification of lignin-based polyols,so as to provide an alternative to petroleum polyols and,in turn,increase functional groups and reduce their harm to humans’health and the environment.To this aim,first,lignin was extracted from raw liquor.Next,the extracted lignin was reacted with diethylenetriamine(DETA)and ethylenediamine(EDA).Finally,the Mannich method was used for the reaction between amine lignin and propylene carbonate.The results of the Fourier Transform Infrared(FTIR)spectroscopy analysis showed that modification with DETA led to more structural change in lignin and peak 1100 indicates the presence of C–O bond related to urethane bonds in modified lignin.Moreover,adding propylene carbonate to aminated lignin did not result in much change in the results of the FTIR analysis.Additionally,urethane bonds can be seen in the results of GPC at 400℃–500℃.Furthermore,a slight decrease in thermal stability was observed in lignin modified with amine and propylene carbonate,compared to the raw lignin sample.
基金Funded by the National Natural Science Foundation of China(Nos.21244006 and 50873013)the Beijing Natural Science Foundation(No.2182056)
文摘A simple non-isocyanate route synthesizing thermoplastic polyurethanes（TPUs） with good thermal and mechanical properties is described. Melt transurethane polycondensation of dimethyl 1,6-hexamethylene dicarbamate with 1,4-butanediol and 1,6-hexanediol was conducted at different molar ratios under the catalysis of tetrabutyl titanate. A series of crystallizable non-isocyanate TPUs with high molecular weight were prepared. The TPUs were characterized by gel permeation chromatography, FT-IR, 1 H-NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X-ray diffraction, AFM, and tensile tests. The TPUs exhibited Mn ranging from 12 500 to 26 400 g/mol, Mw from 16 700 to 56 400 g/mol, Tm up to 151.4 °C, and initial decomposition temperature over 241.8 °C. Their tensile strength reached 42.99 MPa with a strain at break of 30.00%. TPUs constructed simply with butylene, hexylene, and urethane linkages were successfully synthesized through a non-isocyanate route.
文摘Biodegradable porous polyurethanes scaffold have themselves opportunities in service, in-cluding controlled degradation rate, no-toxic degradation products. However, polyurethanes are lack of bioactive groups, which limits their application. This review gives the common modification methods, surface functionalization and blending modification. In finally, the review puts forward to the bulk modification as a new method to enhance the bioactivity of polyure-thanes.
基金financially supported by Shandong Provincial Natural Science Foundation, China (No. ZR2013EMM004)Jinan City Universities and Institutes Independent Innovation Planning Project, China (No. 201402044)
文摘In the paper, a new biodegradable polyurethane（PU, PU-I） was prepared： the prepolymer was synthesized via bulk ring-opening polymerization with poly（ethylene glycol）（M_n= 600）（PEG600） as an initiator and L-lactide（L-LA）, e-caprolactone（CL） as monomers, and the prepolymer was chain-extended with an isocyanate-terminated urethane triblock（macrodiisocyanate） to prepare the PU. The macrodiisocyanate, prepolymer and PUs were characterized by^1H NMR,^（13）C NMR, FT-IR, high resolution mass spectrometry（HR-MS）, gel permeation chromatography（GPC）, thermo gravimetric analysis（TGA）,and differential scanning calorimetry（DSC）. The corresponding PU films showed excellent mechanical properties with a tensile strength of 27.5 MPa and an elongation at break of 996%, and also maintained mechanical properties in physiological saline at 37℃ for more than three weeks, which appeared to be more suitable for biomedical applications.
基金financially supported by the Marmara University,Commission of Scientific Research Project(M.ü.BAPKO)(No.FENC-DRP-080410-0089)
文摘In this study, a novel three functional chain extender （TATATRIOL） was synthesized from the reaction of 1,3,5- tri（prop-2-en-1-yl）-1,3,5-triazinane-2,4,6-trione （TATA） with 2-sulfanylethanol. Then new thermoplastic polyurethanes （TPUs） were synthesized by a one-step bulk polymerization from the reaction of 1,1＇-methanediylbis（4- isocyanatocyclohexane） （H12MDI）, a poly（ethylene adipate） based polyester polyol and a chain extender. Butane-l,4-diol （BD） and the newly synthesized monomer, TATATRIOL, were used as chain extenders. The effects of TATATRIOL on the properties of the TPU were investigated and compared to those of the TPU prepared with BD. The TPUs which derived from the sulfur containing chain extender displayed lower modulus and high elongation at break values than the analogous TPUs derived from BD. Moreover sulfur containing TPUs exhibited higher thermal stability.
文摘Spectroscopic studies have revealed that the amount of polyureas formed and the kinetics of their formation in soy based polyurethane systems are considerably different from traditional systems employing ethylene oxide-propylene oxide (EO-PO) based polyols.The aggregation of polyureas was characterized by the hydrogen bonds formed utilizing FTIR spectroscopy.This study offered the opportunity to assign the previously undefined infrared features.The structural transformation is reflected in the segmental rel...
文摘Film specimens of four segmented polyurethanes with different soft segments, namely polycaprolactone, polytetramethylene adipate, polytetramethylene oxide and polypropylene oxide, and their blends with PVC of different compositions were obtained by solution cast. The permeability of these films to O_2, N_2 and H_2 and their density were measured by using gas chromatography and technique of density gradient column. The polyether polyurethanes were found to have higher permeability than the polyester ones due to their low glass transition temperature and /or the low density value. The blends of PVC and polyether polyurethanes, especially the PPO-based polyurethane, are incompatible, and their permeability coefficient-composition dependence has the typical S-shaped curves. PVC is well compatible with the soft segments in its blends with polyester polyurethanes. For these blends the composition dependence of permeability is characterized by a negative deviation from the semilogarithmic additivity rule, and it is possible to prepare blends having T_g 20℃ lower than that of PVC, but retaining its low permeability almost unchanged, results were discussed in according with the different approaches for the permeation behavior of compatible and incompatible blends.
文摘A series of PCL/MDI/BDO segmented polyurethanes have been synthesized by two-step method in solution.The hard segment content ranges from 10% to 48% by weight, and the molecular weight of PCL diols is 1500. Hard segment spherulites have been observed in compression molded specimens of all of the samples except the one of the lowest hard segment content. The difficulty in sphernlite formation was explained as only in a small temperature range,the microphase separation rate may be faster than the crystallization rate and all these processes are very slow due to the hydrogen bonding between hard and soft segments and the interactions between hard segments themselves. PCL soft segments of molecular weight 1500 is still crystallizable and may form different crystalline superstructures.
文摘This paper presents the implementation of two multicriteria optimization methods based on different approaches, namely, Rough Set Method (RSM) and Net Flow Method (NFM), to the manufacture by reactive extrusion of linear thermoplastic polyurethanes (TPUs), appropriate for medical applications. A preliminary study allowed determining the process operating conditions for which the polymerization time and the average residence time of the reactants in the extruder are of the same order of magnitude. Prior to the optimization, a neural network model able to predict with acceptable accuracy the effect of the operating conditions on the output process variables, was constructed and validated. This model was then used to determine, using Pareto’s concept, a set of non-dominated solutions constituting Pareto’s domain. These solutions were then ranked according to the preferences of a decision maker using NFM and RSM. This allowed providing the 10% highest ranked solutions of Pareto’s domain and proposing a set of optimal operating conditions for the production, with the lowest energy consumption, of TPUs with targeted properties and high purity. Experimental validation runs carried out under similar operating conditions gave rise to criteria values confirming the su- perior performance of NFM, without rejecting, at the same time, the values obtained using RSM.
文摘Silane terminated prepolymers for adhesives, sealants and coatings are of <span style="font-family:"">great industrial importance. They are very important because of their low toxicity over polyurethanes, silicones, and solvent-based products. Hence, many pieces of literature which deal with the synthesis, properties and applications of this Silane terminated polymers hybrid system exist. Silylated polyether (MS polymers) and Silylated Polyurethane Polymers (SPUR) are the bases for numerous sealants, adhesives and coatings used worldwide. A hybrid system mixed with organic-polyurethane proportion and inorganic-alkoxysilane proportion combines the benefits of conventional polyurethane and silicone-based products. This article reviews the chemistry of MS polymers and SPUR and their advantages and disadvantages in silyl terminated prepolymer-based adhesives, sealants and coatings as well as provides information on different end applications.
基金supported by the National Natural Science Foundation of China(Nos.51073104 and 51173118)the Changjiang Scholars and Innovative Research Teams in Universities(No.IRT1163)the Sichuan Provincial Science Fund for Distinguished Young Scholars(No.09ZQ026-024)
文摘To better investigate the degradation and biocompatibility of waterborne biodegradable polyurethanes for tissue engineering, a series of new waterborne biodegradable polyurethanes （PEGPUs） with low degree of crosslinking was synthesized using IPDI, BDO and L-lysine as hard segments, PCL and PEG as soft segment. The bulk structures and properties of the prepared polyurethanes were characterized by Fourier transform infrared spectroscopy （FTIR）, differential scanning calorimetry （DSC）, tensile mechanical tests and water contact angle （WCA） measurements. The degree of microphase separation was slightly improved because of the lowered crosslinking degree of these PEGPUs in comparison with the high cross-linking degree samples, leading to good mechanical properties, as indicated by DSC and stress-strain data. Moreover, biodegradability of the polyurethanes was evaluated in phosphate buffer solutions （PBS） under different pH values and enzymatic solution at pH 7.4 through weight loss monitoring. The results suggested that the degradation of these PEGPUs was closely related to their bulk and surface properties. And the degradation products didn＇t show apparent inhibition effect against fibroblasts in vitro. These studies demonstrated that the waterborne biodegradable polyurethanes could find potential use in soft tissue engineering and tissue regeneration.
