The effective and affordable separation of oil and water,a crucial process in the safe han dling of environmental disasters such as crude oil spills and recovery of valuable resources is a highly sought-after yet chal...The effective and affordable separation of oil and water,a crucial process in the safe han dling of environmental disasters such as crude oil spills and recovery of valuable resources is a highly sought-after yet challenging task.Herein,superhydrophobic PU sponge was fab ricated for the fast and cost-effective adsorptive separation of oil and different organic sol vents from water.Octadecyltrichlorosilane(OTS)-functionalized Fe_(3)O_(4)@SiO_(2)core-shell mi crospheres were dip-coated on the surface of porous materials via a dip-coating process thereby endowing them with superhydrophobicity.Owing to the hydrophobic interaction between OTS molecules and oil and increased capillary force in the micropores,the result ing superhydrophobic sponge served as a selective oil-sorbent scaffold for absorbing oil from oil-water mixtures,including oil-water suspensions and emulsions.Remarkably,after the recovery of the adsorbed oil via mechanical extrusion,these superhydrophobic materials could be reused multiple times and maintain their oil-water separation efficacy even afte 10 oil-water separation cycles.展开更多
Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functio...Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane （FGP） sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle （WAC） of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities （up to 35 times of its own mass）. Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.展开更多
MIL-88A(Fe)@sponge(MS) was synthesized by a dip-coating method, which displayed efficient photocatalytic Cr(Ⅵ) reduction efficiency under both low power LED UV light and real solar light irradiation. It was observed ...MIL-88A(Fe)@sponge(MS) was synthesized by a dip-coating method, which displayed efficient photocatalytic Cr(Ⅵ) reduction efficiency under both low power LED UV light and real solar light irradiation. It was observed that MS(0.2 g/L) could remove 100% Cr(Ⅵ)(10 mg/L) by adding 0.4 mmol/L tartaric acid(TA) without adjusting pH(pH 5.05) within 6.0 min and 3.0 min under UV light and real solar light irradiation, respectively. Besides, the photo-induced e-and radicals(O_(2)^(·-) and CO_(2)^(·-)) were found to play the momentous roles in the MS/TA/UVL/Cr(Ⅵ) system by the scavenger experiments and electron spin resonance(ESR) tests. MS was also filled into a fixed-bed reactor to test the possibility of long-term Cr(Ⅵ)reduction operation in TA/UVL system. As expected, the results revealed that MS could still maintain 100% activity up to 60 h. These results demonstrated that MIL-88A(Fe) might be the potentially efficient catalyst for large-scale wastewater treatment in the near future.展开更多
Oil sorbents are an attractive option for oil-spill cleanup as they may be used for collection and complete removal of oil without adversely affecting the environment. However, traditional oil sorbents exhibit low oil...Oil sorbents are an attractive option for oil-spill cleanup as they may be used for collection and complete removal of oil without adversely affecting the environment. However, traditional oil sorbents exhibit low oil/water separation efficiency and/or low oil-sorption capacity. In this study, an ultra-high performance graphene/polyurethane （PU） sponge has been successfully obtained by in situ polymerization in the presence of graphene dispersed in N-methylpyrrolidone （NMP）. During polymerization, the NMP/graphene dispersion not only serves as a weak amine catalyst for the formation of the sponge, but promotes fixation of the graphene sheets in the framework of the PU sponge owing to the strong dipole interaction between NMP and graphene. The as-prepared graphene/PU sponge was used as an absorbing material for the continuous removal of oil from oil-spill water. The graphene/PU sponge can continuously and rapidly remove oils from immiscible oil/water mixtures in corrosive solutions, including strong acids and bases, hot water, and ice water, with an excellent separation efficiency of above 99.99%. In addition, the as-prepared graphene/PU sponge was effective in separating surfactant-stabilized emulsions with a high separation efficiency of 〉99.91%.展开更多
The increasing demand for sustainable energy storage solutions has intensified the focus on high-performance supercapaci-tors,known for their rapid charge/discharge capabilities,high power density,and long cycle life....The increasing demand for sustainable energy storage solutions has intensified the focus on high-performance supercapaci-tors,known for their rapid charge/discharge capabilities,high power density,and long cycle life.Polyurethane(PU)-based materials have gained attention as promising candidates for supercapacitor electrodes,due to their flexibility,mechanical robustness,and tunable properties.It is important to clarify that PU typically does not contribute directly to charge storage via adsorption or pseudocapacitive mechanisms.Instead,PU serves as a flexible scaffold,a binder,or a precursor for the preparation of heteroatom-doped carbon materials upon thermal treatment.Thus,the term'PU-based'in this review refers to PU-supported or PU-derived composites,where PU enables structural or functional integration of active electrode Materi-als.Polyurethane composites incorporating graphene oxide have demonstrated a specific capacitance of 758.8 mF/cm^(2)with capacitance retention of 92%over 5,000 cycles.Other PU-based electrodes have achieved energy densities up to 22.5 Wh/kg and power densities of 1472.7 W/kg,reflecting their potential for high-performance energy storage applications.Despite these advantages,challenges,such as low intrinsic conductivity and the environmental impact of traditional synthesis methods,limit their widespread adoption.Conventional PU composites often incorporate conductive additives like carbon materi-als,metal oxides,or conductive polymers to enhance their electrochemical performance,yet these approaches may involve non-renewable or toxic components.Developing green energy materials that adhere to sustainability and green chemistry principles is crucial to address these limitations.This includes using renewable resources,environmentally friendly process-ing techniques,and recyclable materials to reduce the ecological footprint and meet the growing need for sustainable energy storage technologies.This review highlights current trends in developing eco-friendly supercapacitor materials,addressing key challenges such as limited conductivity and complex processing.It uniquely integrates green chemistry principles with advances in polyurethane composites,emphasizing sustainable feedstocks,heteroatom doping,and functional nanomateri-als.By combining these aspects,this review provides a comprehensive perspective not fully covered in existing literature.展开更多
Glass/stainless steel porous composite body were prepared by the polyurethane sponge replica method using slurries containing mixture of SiO_2-RO/30 vol%SUS.Sintered porous samples were obtained which consists of well...Glass/stainless steel porous composite body were prepared by the polyurethane sponge replica method using slurries containing mixture of SiO_2-RO/30 vol%SUS.Sintered porous samples were obtained which consists of well-distributed stainless steel particles within the glass matrix.Such a microstructure is desired for the purpose as a soot particulate filters(DPF)utilizing microwave rapid heating in cold start phase.Heating ability of the fabricated porous composite body was carried out placing the specimen in the maximum H-field of a 2.45 GHz single mode applicator. Heating behavior of the samples was mainly influenced by the volume fraction of stainless steel.Higher heating rate was observed for samples with higher stainless steel fraction.Due to the different microwave absorbability of the materials, stainless steel particle in the porous matrix structure was firstly heated up by microwave and transferred the heat energy throughout the whole sample.Increasing of the fraction of the stainless steel particle in the matrix structure led the better heating;however the strength of the samples decreased.展开更多
基金supported by the National Natural Science Foundation of China(Nos.21827815 and 42192571)。
文摘The effective and affordable separation of oil and water,a crucial process in the safe han dling of environmental disasters such as crude oil spills and recovery of valuable resources is a highly sought-after yet challenging task.Herein,superhydrophobic PU sponge was fab ricated for the fast and cost-effective adsorptive separation of oil and different organic sol vents from water.Octadecyltrichlorosilane(OTS)-functionalized Fe_(3)O_(4)@SiO_(2)core-shell mi crospheres were dip-coated on the surface of porous materials via a dip-coating process thereby endowing them with superhydrophobicity.Owing to the hydrophobic interaction between OTS molecules and oil and increased capillary force in the micropores,the result ing superhydrophobic sponge served as a selective oil-sorbent scaffold for absorbing oil from oil-water mixtures,including oil-water suspensions and emulsions.Remarkably,after the recovery of the adsorbed oil via mechanical extrusion,these superhydrophobic materials could be reused multiple times and maintain their oil-water separation efficacy even afte 10 oil-water separation cycles.
基金Supported by the National Natural Science Foundation of China(21776319)
文摘Nowadays, oil spills have led to a serious environmental crisis of the world. To deal with this problem, inspired from super-hydrophobic lotus leaf, this study fabricated super-hydrophobic and super-lipophilic functionalized graphene oxide/polyurethane （FGP） sponge by a simple and inexpensive dip coating method. The resulting FGP sponge was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy and water contact angle. The results expressed that FGP sponge exhibited a similar surface structure to that of a lotus leaf, and possessed the super-hydrophobic characteristic with the water contact angle （WAC） of 152°± 1 °. The absorption capacity and reusability were also investigated. It can be seen that, the FGP sponge can remove a wide range of oils and organic solvents from water with good absorption capacities （up to 35 times of its own mass）. Significantly, after 10 cycles the absorption capacity of the oils and organic solvents was higher than 90°; for the reused FGP sponge, demonstrating the good reusability of the FGP sponge. Therefore, this study probably provided a simole way to remove the pollutions ofoil spills and toxic organism from water.
基金supported by National Natural Science Foundation of China (Nos. 22176012, 51878023)Beijing Natural Science Foundation (No. 8202016)+1 种基金Beijing Talent Project (No. 2020A27)BUCEA Doctor Graduate Scientific Research Ability Improvement Project (No. DG2021004)。
文摘MIL-88A(Fe)@sponge(MS) was synthesized by a dip-coating method, which displayed efficient photocatalytic Cr(Ⅵ) reduction efficiency under both low power LED UV light and real solar light irradiation. It was observed that MS(0.2 g/L) could remove 100% Cr(Ⅵ)(10 mg/L) by adding 0.4 mmol/L tartaric acid(TA) without adjusting pH(pH 5.05) within 6.0 min and 3.0 min under UV light and real solar light irradiation, respectively. Besides, the photo-induced e-and radicals(O_(2)^(·-) and CO_(2)^(·-)) were found to play the momentous roles in the MS/TA/UVL/Cr(Ⅵ) system by the scavenger experiments and electron spin resonance(ESR) tests. MS was also filled into a fixed-bed reactor to test the possibility of long-term Cr(Ⅵ)reduction operation in TA/UVL system. As expected, the results revealed that MS could still maintain 100% activity up to 60 h. These results demonstrated that MIL-88A(Fe) might be the potentially efficient catalyst for large-scale wastewater treatment in the near future.
文摘Oil sorbents are an attractive option for oil-spill cleanup as they may be used for collection and complete removal of oil without adversely affecting the environment. However, traditional oil sorbents exhibit low oil/water separation efficiency and/or low oil-sorption capacity. In this study, an ultra-high performance graphene/polyurethane （PU） sponge has been successfully obtained by in situ polymerization in the presence of graphene dispersed in N-methylpyrrolidone （NMP）. During polymerization, the NMP/graphene dispersion not only serves as a weak amine catalyst for the formation of the sponge, but promotes fixation of the graphene sheets in the framework of the PU sponge owing to the strong dipole interaction between NMP and graphene. The as-prepared graphene/PU sponge was used as an absorbing material for the continuous removal of oil from oil-spill water. The graphene/PU sponge can continuously and rapidly remove oils from immiscible oil/water mixtures in corrosive solutions, including strong acids and bases, hot water, and ice water, with an excellent separation efficiency of above 99.99%. In addition, the as-prepared graphene/PU sponge was effective in separating surfactant-stabilized emulsions with a high separation efficiency of 〉99.91%.
基金Open access funding provided by The Science,Technology&Innovation Funding Authority(STDF)in cooperation with The Egyp-tian Knowledge Bank(EKB).
文摘The increasing demand for sustainable energy storage solutions has intensified the focus on high-performance supercapaci-tors,known for their rapid charge/discharge capabilities,high power density,and long cycle life.Polyurethane(PU)-based materials have gained attention as promising candidates for supercapacitor electrodes,due to their flexibility,mechanical robustness,and tunable properties.It is important to clarify that PU typically does not contribute directly to charge storage via adsorption or pseudocapacitive mechanisms.Instead,PU serves as a flexible scaffold,a binder,or a precursor for the preparation of heteroatom-doped carbon materials upon thermal treatment.Thus,the term'PU-based'in this review refers to PU-supported or PU-derived composites,where PU enables structural or functional integration of active electrode Materi-als.Polyurethane composites incorporating graphene oxide have demonstrated a specific capacitance of 758.8 mF/cm^(2)with capacitance retention of 92%over 5,000 cycles.Other PU-based electrodes have achieved energy densities up to 22.5 Wh/kg and power densities of 1472.7 W/kg,reflecting their potential for high-performance energy storage applications.Despite these advantages,challenges,such as low intrinsic conductivity and the environmental impact of traditional synthesis methods,limit their widespread adoption.Conventional PU composites often incorporate conductive additives like carbon materi-als,metal oxides,or conductive polymers to enhance their electrochemical performance,yet these approaches may involve non-renewable or toxic components.Developing green energy materials that adhere to sustainability and green chemistry principles is crucial to address these limitations.This includes using renewable resources,environmentally friendly process-ing techniques,and recyclable materials to reduce the ecological footprint and meet the growing need for sustainable energy storage technologies.This review highlights current trends in developing eco-friendly supercapacitor materials,addressing key challenges such as limited conductivity and complex processing.It uniquely integrates green chemistry principles with advances in polyurethane composites,emphasizing sustainable feedstocks,heteroatom doping,and functional nanomateri-als.By combining these aspects,this review provides a comprehensive perspective not fully covered in existing literature.
文摘Glass/stainless steel porous composite body were prepared by the polyurethane sponge replica method using slurries containing mixture of SiO_2-RO/30 vol%SUS.Sintered porous samples were obtained which consists of well-distributed stainless steel particles within the glass matrix.Such a microstructure is desired for the purpose as a soot particulate filters(DPF)utilizing microwave rapid heating in cold start phase.Heating ability of the fabricated porous composite body was carried out placing the specimen in the maximum H-field of a 2.45 GHz single mode applicator. Heating behavior of the samples was mainly influenced by the volume fraction of stainless steel.Higher heating rate was observed for samples with higher stainless steel fraction.Due to the different microwave absorbability of the materials, stainless steel particle in the porous matrix structure was firstly heated up by microwave and transferred the heat energy throughout the whole sample.Increasing of the fraction of the stainless steel particle in the matrix structure led the better heating;however the strength of the samples decreased.
