Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catal...Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.展开更多
A series of new complexes{2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyri-dine}MCI2[M=Fe(Ⅱ)(2),Co(Ⅱ)(3),Ni(Ⅱ)(4),Cu(Ⅱ)(5),Zn(Ⅱ)(6)]have been synthesized.At 25℃,using 500 equiv of methylaluminoxane(MAO),the...A series of new complexes{2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyri-dine}MCI2[M=Fe(Ⅱ)(2),Co(Ⅱ)(3),Ni(Ⅱ)(4),Cu(Ⅱ)(5),Zn(Ⅱ)(6)]have been synthesized.At 25℃,using 500 equiv of methylaluminoxane(MAO),the activities of Fe(Ⅱ),Co(Ⅱ)catalysts can reach 4.02×106 g/mol-Fehatm for ethylene polymerization and 3.98×105 g/mol-Cohatm for ethylene oligomerization.The effects of polymerization conditions such as reaction temperature,Al/M molar ratio and time on the activity of catalyst have been explored.展开更多
To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polym...To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.展开更多
Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effectiv...Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.展开更多
Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford prod...Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.展开更多
A series of nickel（II） α-diimine complexes with strong electron-withdrawing carboxyl groups, having reactive hydrogen atoms, were prepared and used as precatalysts for ethylene oligomerization and/or polymerization...A series of nickel（II） α-diimine complexes with strong electron-withdrawing carboxyl groups, having reactive hydrogen atoms, were prepared and used as precatalysts for ethylene oligomerization and/or polymerization. The influence of metal halides and ligand structure on the catalytic activity and properties of products was investigated. The results showed that nickel bromide was much more active than nickel chloride, and the substituents at the ortho-position of aryl ring had large influence on the properties of products. Therefore, the products ranging from liquid oligomers to polymers could be readily obtained by the variation of the substituents on the ligands and reaction conditions.展开更多
Novel Ni（II）-based acetyliminopyridine complexes 1b, 2b, 3b （1-3b）, which are synthesized from ligands 1a, 2a, 3a （1-3a） and [NiCl2（DME）], are suitable precursors for the catalysts that are necessary for ethyl...Novel Ni（II）-based acetyliminopyridine complexes 1b, 2b, 3b （1-3b）, which are synthesized from ligands 1a, 2a, 3a （1-3a） and [NiCl2（DME）], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane （MAO）. The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linear α-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers〉C4. The activity of 3b-MAO complex is 6.3×10^7 g/（molNi.h） at 50 ℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.展开更多
The discovery of highly active 2,6-bis（imino）pyridyl iron and cobalt complexes provided a milestone of latetransition metal catalysts for ethylene oligomerization and polymerization with being currently investigated...The discovery of highly active 2,6-bis（imino）pyridyl iron and cobalt complexes provided a milestone of latetransition metal catalysts for ethylene oligomerization and polymerization with being currently investigated for the scale-up process. The crucial problems are remaining in the catalytic systems： the catalytic systems targeting ethylene polymerization produce more oligomers at elevated reaction temperatures, however, there is a recognizable amount of high-molecularweight polyethylene remained in the modified catalytic system for the oligomerization process. Beyond the modification of bis（imino）pyridyl metal complexes, several alternative proeatalysts＇ models have been developed in our group. This review highlighted the achievements in exploring new iron and cobalt complexes with tridentate NNN ligands as procatalysts for ethylene oligomerization and polymerization.展开更多
A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yie...A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.展开更多
To achieve the target of carbon neutrality,it is crucial to develop an efficient and green synthesis methodology with good atomic economy to achieve sufficient utilization of energy and sustainable development.Photoin...To achieve the target of carbon neutrality,it is crucial to develop an efficient and green synthesis methodology with good atomic economy to achieve sufficient utilization of energy and sustainable development.Photoinduced electron transfer reversible addition-fragmentation chain-transfer(PET-RAFT)polymerization is a precise methodology for constructing polymers with well-defined structures.However,conventional semiconductor-mediated PET-RAFT polymerization still has considerable limitations in terms of efficiency as well as the polymerization environment.Herein,sulfur-doped carbonized polymer dots(CPDs)were hydrothermally synthesized for catalysis of aqueous PET-RAFT polymerization at unprecedented efficiency with a highest propagation rate of 5.05 h-1.The resulting polymers have well-controlled molecular weight and narrow molecular weight dispersion(Ð<1.10).Based on the optoelectronic characterizations,we obtained insights into the photoinduced electron transfer process and proposed the mechanism for CPD-mediated PET-RAFT polymerization.In addition,as-synthesized CPDs for PET-RAFT polymerization were also demonstrated to be suitable for a wide range of light sources(blue/green/solar irradiation),numerous monomers,low catalyst loading(low as 0.01 mg mL^(-1)),and multiple polar solvent environments,all of which allowed to achieve efficiencies much higher than those of existing semiconductor-mediated methods.Finally,the CPDs were confirmed to be non-cytotoxic and catalyzed PET-RAFT polymerization successfully in cell culture media,indicating broad prospects in biomedical fields.展开更多
The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor sta...The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor stability.In this work,a series of different SiO_(2)/Al_(2)O_(3) ratio mordenite are synthesized by utilizing hexamethyleneimine(HMI)as the organic structure directing agent,and it turns out that the rod-like zeolite with the ratio of SiO_(2)/Al_(2)O_(3)=14 exhibits the higher dimerization selectivity.The incorporation of TPOAC optimizes the pore structure and acid site distribution of the rod-like zeolite,which enables the samples to not only exhibit a conversion rate of isoamylene over 88.30% within 12 h,while maintaining good dimerization selectivity.These findings provide a promising approach for improving the efficiency and sustainability of olefin oligomerization processes.展开更多
Binuclear complexes have attracted extensive attention in fields such as catalysis because of their likely bimetallic synergistic effect;however,the mechanism and factors influencing this synergism remain unclear.In t...Binuclear complexes have attracted extensive attention in fields such as catalysis because of their likely bimetallic synergistic effect;however,the mechanism and factors influencing this synergism remain unclear.In this work,six bis-β-ketoimine binuclear titanium complexes4a-4f containing different alkylthio sidearms and configurations were synthesized and characterized by nuclear magnetic resonance hydrogen spectrum(~1H-NMR),nuclear magnetic resonance carbon spectrum(^(13)C-NMR),Fourier transform infrared spectrum(FTIR),and elemental analysis.The intermetallic distances of isomeric complexes 4a,4d,4e and 4f determined through density functional theory(DFT)optimization were in the order 4a<4d<4e<4f and were found to significantly influence the catalytic performance for ethylene(co)polymerization.These complexes could efficiently catalyze ethylene polymerization and ethylene/1-hexene or ethylene/1-octene copolymerization with high activity to produce highmolecular-weight ethylene homo-and co-polymers.Among the three binuclear titanium complexes 4a-4c with similar structures but different lengths of alkylthio sidearms,complex 4a,which contained the shortest methylthio sidearm,exhibited the highest activity for ethylene polymerization and copolymerization with 1-hexene or 1-octene.Additionally,for ethylene/1-hexene or ethylene/1-octene copolymerization,it showed the highest comonomer incorporation compared with propylthio(4b)and octylthio(4c)derivatives because of the smaller steric hindrance of the methyl group in 4a and the more open coordination space for vinyl monomers.Furthermore,among the isomeric complexes 4a,4d,4e and4f,complex 4a with the shortest bimetallic distance also exhibited the highest activity towards ethylene(co)polymerization,and the highest 1-hexene or 1-octene incorporation in comparison with its regioisomeric counterparts 4d,4e and p-phenyl-bridged analog 4f,owing to a more appropriate bimetallic distance that is conducive to a synergistic effect.展开更多
It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation...It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation but can also track the fouling process during operation.Herein,an aggregation-induced emission(AIE)-active polymer membrane was prepared by the interfacial polymerization of a cyclodextrin-based glycocluster(CD@Glucose)and a tetraphenylethylene derivative modified with boronic acid groups(TPEDB)on the surface of a polyacrylonitrile(PAN)ultrafiltration membrane.This interfacial polymerization method can be stacked layer-by-layer to regulate the hydrophilicity and pore structure of the membrane.With the increase in the number of polymer layers,the separation and antifouling properties of the membrane gradually improved.Owing to the AIE property of the crosslinking agent TPEDB,the occurrence of interfacial polymerization and the degree of fouling during membrane operation can be monitored by the fluorescence distribution and intensity.With the aggravation of membrane fouling,the fluorescence decreased gradually,but recovered after cleaning.Therefore,this AIE effect can be used for real-time monitoring of interfacial polymerization as well as membrane fouling.展开更多
Consisting of natural histidine residues,polyhistidine(PHis)simulates functional proteins.Traditional approaches towards PHis require the protection of imidazole groups before monomer synthesis and polymerization to p...Consisting of natural histidine residues,polyhistidine(PHis)simulates functional proteins.Traditional approaches towards PHis require the protection of imidazole groups before monomer synthesis and polymerization to prevent degradation and side reactions.In the contribution,histidine N-thiocarboxyanhydride(His-NTA)is directly synthesized in aqueous solution without protection.With the self-catalysis of the imidazole side group,the ring-closing reaction to form His-NTA does not require any activating reagent(e.g.,phosphorus tribromide),which is elucidated by density functional theory(DFT)calculations.His-NTA directly polymerizes into PHis bearing unprotected imidazole groups with designable molecular weights(4.2-7.7 kg/mol)and low dispersities(1.10-1.19).Kinetic experiments and Monte Carlo simulations reveal the elementary reactions and the relationship between the conversion of His-NTA and time during polymerization.Block copolymerization of His-NTA with sarcosine N-thiocarboxyanhydride(Sar-NTA)demonstrate versatile construction of functional polypept(o)ides.The triblock copoly(amino acid)PHis-b-PSar-b-PHis is capable to reversibly coordinate with transition metal ions(Fe^(2+),Co^(2+),Ni^(2+),Cu^(2+)and Zn^(2+))to form pH-sensitive hydrogels.展开更多
Some organogermanium oligomers with different side groups were synthesized via ligand substitution polymerization from I, l-dioxane complex of germanium dichloride with different organolithium compounds. The oligomers...Some organogermanium oligomers with different side groups were synthesized via ligand substitution polymerization from I, l-dioxane complex of germanium dichloride with different organolithium compounds. The oligomers were isolated through either precipitation from methanol or extraction using toluene with a yield of no less than 50%. The weight average molecular weight (M-w) of the oligomers is ranging from 1.4 x 10(3) to 5.9 x 10(3) depending on the type and alkyl length of the organolithium compounds used.展开更多
Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymeriza...Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.展开更多
As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of t...As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of the novel imine-based polymer through the copolymerization of cyclooctene with cyclic imine comonomer via ROMP.Because of the efficient hydrolysis reactions of the imine group,the generated copolymer can be easily degraded under mild condition.Moreover,the generated degradable product was the telechelic polymer bearing amine group,which was highly challenged for its direct synthesis.And this telechelic polymer could also be used for the further synthesis of new polymer through post-transformation.The introduction of imine unit in this work provides a new example of the degradable polymer synthesis.展开更多
Nowadays,the utilization of renewable biomass as a substitute for petroleum-based feedstock in the synthesis of aerospace fuel has garnered significantattention.In this work,we use molecular sieve to catalyze the cont...Nowadays,the utilization of renewable biomass as a substitute for petroleum-based feedstock in the synthesis of aerospace fuel has garnered significantattention.In this work,we use molecular sieve to catalyze the controllable oligomerization of lignocellulose platform molecule furfuryl alcohol,which is prone to polymerize and generate furfuryl alcohol resin and other macromolecular substances.In order to reduce the formation of macromolecule polymers and enhance the yield of oligomers within the C9—C15 range,the reactive extraction strategy was implemented.Utilizing a low polar solvent,increasing the extraction phase content,employing a hydrophilic and weakly acidic molecular sieve are all beneficialfor enhancing the yield of the target products.Finally,under the optimal conditions,the conversion of furfuryl alcohol reaches 84.7%and the yield of the target products is improved from 10%—15%to 41.4%.After hydrodeoxygenation,a liquid fuel with paraffinas the main component was obtained.Moreover,the effect of substituents on the polymerization activity of furan derivatives was compared,the alkyl side chains as substituents can enhance both reactant activity and yield of target products.This study presents a viable approach for the efficientsynthesis of aviation fuel directly from bio-based furfuryl alcohol.展开更多
Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembl...Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembly and photoinduced seeded reversible addition-fragmentation chain transfer(RAFT)polymerization to prepare a diverse set of core-shell colloidal particles with a well-defined polymer layer.Chemical compositions,structures,and thicknesses of polymer layers could be conveniently regulated by using different types of monomers and feed[monomer]/[chain transfer agent]ratios during seeded RAFT polymerization.展开更多
Although solid-state polymer electrolytes(SPEs)are expected to solve the safety hazards and limited energy density in the energy storage systems,they still encounter an inferior electrode/electrolyte interface when pr...Although solid-state polymer electrolytes(SPEs)are expected to solve the safety hazards and limited energy density in the energy storage systems,they still encounter an inferior electrode/electrolyte interface when prepared in an ex situ manner.Recently,in situ polymerization of SPEs favor high interfacial infiltrability,improved interface contact,and reduced interface resistance,owing to the formation of a"superconformal"interface between electrode and electrolyte.Especially,in situ strategies employing ring-opening polymerization(ROP)are emerging as dazzling stars,further enabling moderate polymerization conditions,controllable molecular structure,and reduced interfacial side reaction.As the main monomers that can be in situ polymerized via the ROP strategy,cyclic ethers have been used to construct the CE-SPEs with many merits,including good battery electrochemical performances and a simple assembly process.Here,as a systematic summarization of the existing reports,this review focuses on the polymerization mechanism of ROP,the design principles of CE-SPEs electrolytes,and the recent application of in situ CE-SPEs.In particular,this review thoroughly discusses the selection of different cyclic monomers,initiators and various modification approaches in in situ fabricating CE-SPEs.Ending with offering future challenges and perspectives,this review envisions shedding light on the profound understanding and scientific guidance for further development of high-performance in situ CE-SPEs.展开更多
基金financial support from the National Natural Science Foundation of China(Nos.22401274,U23B6011)the Jilin Provincial Science and Technology Department Program(No.20250102070JC)。
文摘Catalysts are key for olefin polymerization reactions and are also ubiquitous in catalysis science.Multinuclear metal catalysts have witnessed enhanced performances in catalytic reactions relative to mononuclear catalysts,but which substantially involve multi-step,tedious,and difficult synthesis.Herein,this study reports an intriguing approach to construct multi-nuclear catalysts for the milestoneα-diimine nickel catalysts using an oligomeric strategy.A polymerizable norbornene unit is incorporated into theα-diimine ligand backbone,leading to the formation of the monomeric nickel catalyst Ni_(1)and its corresponding oligomeric nickel catalysts(Ni_(3)and Ni_(5))with varying degrees of polymerization(DP=3 and 5).Notably,the oligomeric catalyst Ni_(5)was facilely scaled up(50 g-level),showed enhanced thermal stability,exhibited 4.6 times higher activity,and yielded polyethylene elastomer with a 379%increased molecular weight in ethylene polymerization,compared to the monomeric catalyst Ni_(1).Catalytic performance enhancements of oligomeric catalysts were found to be DP-dependent.The kilogram-scale polyethylene,produced using Ni_(5)in a 20 L reactor,presented a highly branched all-hydrocarbon structure,which demonstrated typical elastic properties(tensile strength:4 MPa,elastic recovery:SR=72%)along with great processability(MFI=3.0 g/10 min),insulating characteristics(volume resistivity=2×10^(16)Ω/m),and hydrophobicity(water vapor permeability:0.03 g/m^(2)/day),suggesting potentially practical applications.
基金supported by the Chinese Academy of Sciences,the National Natural Science Foundation of China(Grant No.20371039)National Basic Research Program(the 973 Program,No.2003CB214600)+1 种基金the Key Laboratory Research and Establishment Program of Shaanxi Education Section(No.03JS006)the Natural Science Foundation of Shaanxi Province(Grant No.04JK143).
文摘A series of new complexes{2,6-bis[1-((2-methyl-4-methoxyphenyl)imino)ethyl]pyri-dine}MCI2[M=Fe(Ⅱ)(2),Co(Ⅱ)(3),Ni(Ⅱ)(4),Cu(Ⅱ)(5),Zn(Ⅱ)(6)]have been synthesized.At 25℃,using 500 equiv of methylaluminoxane(MAO),the activities of Fe(Ⅱ),Co(Ⅱ)catalysts can reach 4.02×106 g/mol-Fehatm for ethylene polymerization and 3.98×105 g/mol-Cohatm for ethylene oligomerization.The effects of polymerization conditions such as reaction temperature,Al/M molar ratio and time on the activity of catalyst have been explored.
基金the support from the Jiangsu Provincial Senior Talent Program (Dengfeng,Jiangsu University)the support from the National Key R&D Program of China (No.2024YFB3612600)+3 种基金the National Natural Science Foundation of China (Nos.22275098,62288102)Basic Research Program of Jiangsu (No.BK20243057)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (No.NY222097)the National Natural Science Foundation of China (No.62205035)。
文摘To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.
基金financially supported by the National Natural Science Foundation of China(No.52473338)the National Natural Science Foundation of China(Nos.52173004 and 51873055)+3 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0540000)Advanced Materials-National Science and Technology Major Project(No.2025ZD0614000)Hebei Natural Science Foundation(No.E2022202015)Anhui Province Science and Technology Innovation Tackling Key Project(No.202423i08050025)。
文摘Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.
基金financially supported by National Key R&D Program Young Scientists Project(No.2023YFC3903100)the National Natural Science Foundation of China(No.22322503)analytical and testing assistance from the Analysis and Testing Center of HUST。
文摘Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.
基金financially supported by the National Natural Basic Research Program of China(No.2011CB606001)
文摘A series of nickel（II） α-diimine complexes with strong electron-withdrawing carboxyl groups, having reactive hydrogen atoms, were prepared and used as precatalysts for ethylene oligomerization and/or polymerization. The influence of metal halides and ligand structure on the catalytic activity and properties of products was investigated. The results showed that nickel bromide was much more active than nickel chloride, and the substituents at the ortho-position of aryl ring had large influence on the properties of products. Therefore, the products ranging from liquid oligomers to polymers could be readily obtained by the variation of the substituents on the ligands and reaction conditions.
基金This work is supported by PetroChina Company Limited (No.030414-01)
文摘Novel Ni（II）-based acetyliminopyridine complexes 1b, 2b, 3b （1-3b）, which are synthesized from ligands 1a, 2a, 3a （1-3a） and [NiCl2（DME）], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane （MAO）. The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linear α-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers〉C4. The activity of 3b-MAO complex is 6.3×10^7 g/（molNi.h） at 50 ℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.
文摘The discovery of highly active 2,6-bis（imino）pyridyl iron and cobalt complexes provided a milestone of latetransition metal catalysts for ethylene oligomerization and polymerization with being currently investigated for the scale-up process. The crucial problems are remaining in the catalytic systems： the catalytic systems targeting ethylene polymerization produce more oligomers at elevated reaction temperatures, however, there is a recognizable amount of high-molecularweight polyethylene remained in the modified catalytic system for the oligomerization process. Beyond the modification of bis（imino）pyridyl metal complexes, several alternative proeatalysts＇ models have been developed in our group. This review highlighted the achievements in exploring new iron and cobalt complexes with tridentate NNN ligands as procatalysts for ethylene oligomerization and polymerization.
基金This project was supported by the National Natural Science Foundation of China (No. 20084001).
文摘A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammoniun bromide as phase transfer catalyst (PTC) at 0 'C . The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270 °C and the resulting polymer had a Mw, of 8 × 103 with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.
基金supported by the National Natural Science Foundation of China(NSFC)under Grant No.22035001 and No.52233005.
文摘To achieve the target of carbon neutrality,it is crucial to develop an efficient and green synthesis methodology with good atomic economy to achieve sufficient utilization of energy and sustainable development.Photoinduced electron transfer reversible addition-fragmentation chain-transfer(PET-RAFT)polymerization is a precise methodology for constructing polymers with well-defined structures.However,conventional semiconductor-mediated PET-RAFT polymerization still has considerable limitations in terms of efficiency as well as the polymerization environment.Herein,sulfur-doped carbonized polymer dots(CPDs)were hydrothermally synthesized for catalysis of aqueous PET-RAFT polymerization at unprecedented efficiency with a highest propagation rate of 5.05 h-1.The resulting polymers have well-controlled molecular weight and narrow molecular weight dispersion(Ð<1.10).Based on the optoelectronic characterizations,we obtained insights into the photoinduced electron transfer process and proposed the mechanism for CPD-mediated PET-RAFT polymerization.In addition,as-synthesized CPDs for PET-RAFT polymerization were also demonstrated to be suitable for a wide range of light sources(blue/green/solar irradiation),numerous monomers,low catalyst loading(low as 0.01 mg mL^(-1)),and multiple polar solvent environments,all of which allowed to achieve efficiencies much higher than those of existing semiconductor-mediated methods.Finally,the CPDs were confirmed to be non-cytotoxic and catalyzed PET-RAFT polymerization successfully in cell culture media,indicating broad prospects in biomedical fields.
基金supported by the National Natural Science Foundation of China(21776505)。
文摘The oligomerization of light olefins is considered a green production technology.Currently,the application of mordenite in isoamylene oligomerization faces two main challenges:low dimerization selectivity and poor stability.In this work,a series of different SiO_(2)/Al_(2)O_(3) ratio mordenite are synthesized by utilizing hexamethyleneimine(HMI)as the organic structure directing agent,and it turns out that the rod-like zeolite with the ratio of SiO_(2)/Al_(2)O_(3)=14 exhibits the higher dimerization selectivity.The incorporation of TPOAC optimizes the pore structure and acid site distribution of the rod-like zeolite,which enables the samples to not only exhibit a conversion rate of isoamylene over 88.30% within 12 h,while maintaining good dimerization selectivity.These findings provide a promising approach for improving the efficiency and sustainability of olefin oligomerization processes.
基金financially supported by the National Natural Science Foundation of China(No.21172269)the Fundamental Research Funds for the Central Universities,SouthCentral Minzu University(No.CZH24005)。
文摘Binuclear complexes have attracted extensive attention in fields such as catalysis because of their likely bimetallic synergistic effect;however,the mechanism and factors influencing this synergism remain unclear.In this work,six bis-β-ketoimine binuclear titanium complexes4a-4f containing different alkylthio sidearms and configurations were synthesized and characterized by nuclear magnetic resonance hydrogen spectrum(~1H-NMR),nuclear magnetic resonance carbon spectrum(^(13)C-NMR),Fourier transform infrared spectrum(FTIR),and elemental analysis.The intermetallic distances of isomeric complexes 4a,4d,4e and 4f determined through density functional theory(DFT)optimization were in the order 4a<4d<4e<4f and were found to significantly influence the catalytic performance for ethylene(co)polymerization.These complexes could efficiently catalyze ethylene polymerization and ethylene/1-hexene or ethylene/1-octene copolymerization with high activity to produce highmolecular-weight ethylene homo-and co-polymers.Among the three binuclear titanium complexes 4a-4c with similar structures but different lengths of alkylthio sidearms,complex 4a,which contained the shortest methylthio sidearm,exhibited the highest activity for ethylene polymerization and copolymerization with 1-hexene or 1-octene.Additionally,for ethylene/1-hexene or ethylene/1-octene copolymerization,it showed the highest comonomer incorporation compared with propylthio(4b)and octylthio(4c)derivatives because of the smaller steric hindrance of the methyl group in 4a and the more open coordination space for vinyl monomers.Furthermore,among the isomeric complexes 4a,4d,4e and4f,complex 4a with the shortest bimetallic distance also exhibited the highest activity towards ethylene(co)polymerization,and the highest 1-hexene or 1-octene incorporation in comparison with its regioisomeric counterparts 4d,4e and p-phenyl-bridged analog 4f,owing to a more appropriate bimetallic distance that is conducive to a synergistic effect.
基金supported by the Fundamental Research Funds for Central Universities(No.30922010811).
文摘It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation but can also track the fouling process during operation.Herein,an aggregation-induced emission(AIE)-active polymer membrane was prepared by the interfacial polymerization of a cyclodextrin-based glycocluster(CD@Glucose)and a tetraphenylethylene derivative modified with boronic acid groups(TPEDB)on the surface of a polyacrylonitrile(PAN)ultrafiltration membrane.This interfacial polymerization method can be stacked layer-by-layer to regulate the hydrophilicity and pore structure of the membrane.With the increase in the number of polymer layers,the separation and antifouling properties of the membrane gradually improved.Owing to the AIE property of the crosslinking agent TPEDB,the occurrence of interfacial polymerization and the degree of fouling during membrane operation can be monitored by the fluorescence distribution and intensity.With the aggravation of membrane fouling,the fluorescence decreased gradually,but recovered after cleaning.Therefore,this AIE effect can be used for real-time monitoring of interfacial polymerization as well as membrane fouling.
基金financially supported by the National Natural Science Foundation of China(Nos.22271252 and 22201105)。
文摘Consisting of natural histidine residues,polyhistidine(PHis)simulates functional proteins.Traditional approaches towards PHis require the protection of imidazole groups before monomer synthesis and polymerization to prevent degradation and side reactions.In the contribution,histidine N-thiocarboxyanhydride(His-NTA)is directly synthesized in aqueous solution without protection.With the self-catalysis of the imidazole side group,the ring-closing reaction to form His-NTA does not require any activating reagent(e.g.,phosphorus tribromide),which is elucidated by density functional theory(DFT)calculations.His-NTA directly polymerizes into PHis bearing unprotected imidazole groups with designable molecular weights(4.2-7.7 kg/mol)and low dispersities(1.10-1.19).Kinetic experiments and Monte Carlo simulations reveal the elementary reactions and the relationship between the conversion of His-NTA and time during polymerization.Block copolymerization of His-NTA with sarcosine N-thiocarboxyanhydride(Sar-NTA)demonstrate versatile construction of functional polypept(o)ides.The triblock copoly(amino acid)PHis-b-PSar-b-PHis is capable to reversibly coordinate with transition metal ions(Fe^(2+),Co^(2+),Ni^(2+),Cu^(2+)and Zn^(2+))to form pH-sensitive hydrogels.
基金This project of 29504030 was supported by the National Natural Science Foundation of China
文摘Some organogermanium oligomers with different side groups were synthesized via ligand substitution polymerization from I, l-dioxane complex of germanium dichloride with different organolithium compounds. The oligomers were isolated through either precipitation from methanol or extraction using toluene with a yield of no less than 50%. The weight average molecular weight (M-w) of the oligomers is ranging from 1.4 x 10(3) to 5.9 x 10(3) depending on the type and alkyl length of the organolithium compounds used.
基金financially supported by the National Key R&D Program of China(No.2022YFC2805103)the National Natural Science Foundation of China(Nos.52022031 and 52263001)the Foundation from Qinghai Science and Technology Department(No.2022-ZJ-944Q)。
文摘Incorporation of acetal groups in the backbone is a potent strategy to create polymers that are cleavable or degradable under acidic conditions.We report here an in-depth study on the ring-closing-opening copolymerization of o-phthalaldehyde(OPA)and epoxide using Lewis pair type two-component organocatalysts for producing acetal-functionalized polyether and polyurethane.Notably,triethylborane as the Lewis acid,in comparison with tri(n-butyl)borane,more effectively enhances the polymerization activity by mitigating borane-induced reduction of the aldehyde group into extra initiating(borinic ester)species.Density functional theory(DFT)calculations present comparable energy barriers of OPA-epoxide cross-propagation and epoxide self-propagation,which is consistent with the experimental finding that an alternating-rich copolymer comprising mostly OPA-epoxide units but also epoxide-epoxide linkages is produced.In particular,when epoxide is added in a large excess,the product becomes a polyether containing acetal functionalities in the central part of the backbone and thus being convertible into polyurethane with refined acid degradability.
基金financially supported by National Key R&D Program of China(No.2021YFA1501700)CAS Project for Young Scientists in Basic Research(No.YSBR-094)+1 种基金Natural Science Foundation of Anhui Province(Nos.2308085Y35 and 2023AH030002)Hefei Natural Science Foundation(No.202304)。
文摘As a powerful synthetic tool,ruthenium-catalyzed ring-opening metathesis polymerization(ROMP)has been widely utilized to prepare diverse heteroatom-containing polymers.In this contribution,we report the synthesis of the novel imine-based polymer through the copolymerization of cyclooctene with cyclic imine comonomer via ROMP.Because of the efficient hydrolysis reactions of the imine group,the generated copolymer can be easily degraded under mild condition.Moreover,the generated degradable product was the telechelic polymer bearing amine group,which was highly challenged for its direct synthesis.And this telechelic polymer could also be used for the further synthesis of new polymer through post-transformation.The introduction of imine unit in this work provides a new example of the degradable polymer synthesis.
基金support from the National Key Research and Development Program of China(2023YFB4103000)the Joint Fund of Ministry of Education for Equipment Pre-research(8091B03052304)the Haihe Laboratory of Sustainable Chemical Transformations for financialsupport.
文摘Nowadays,the utilization of renewable biomass as a substitute for petroleum-based feedstock in the synthesis of aerospace fuel has garnered significantattention.In this work,we use molecular sieve to catalyze the controllable oligomerization of lignocellulose platform molecule furfuryl alcohol,which is prone to polymerize and generate furfuryl alcohol resin and other macromolecular substances.In order to reduce the formation of macromolecule polymers and enhance the yield of oligomers within the C9—C15 range,the reactive extraction strategy was implemented.Utilizing a low polar solvent,increasing the extraction phase content,employing a hydrophilic and weakly acidic molecular sieve are all beneficialfor enhancing the yield of the target products.Finally,under the optimal conditions,the conversion of furfuryl alcohol reaches 84.7%and the yield of the target products is improved from 10%—15%to 41.4%.After hydrodeoxygenation,a liquid fuel with paraffinas the main component was obtained.Moreover,the effect of substituents on the polymerization activity of furan derivatives was compared,the alkyl side chains as substituents can enhance both reactant activity and yield of target products.This study presents a viable approach for the efficientsynthesis of aviation fuel directly from bio-based furfuryl alcohol.
基金support from the Science and Technology Program of Guangzhou(No.2024A04J2821)the National Natural Science Foundation of China(Nos.52222301,22171055)the Guangdong Natural Science Foundation for Distinguished Young Scholar(No.2022B1515020078)。
文摘Core-shell colloidal particles with a polymer layer have broad applications in different areas.Herein,we developed a two-step method combining aqueous surface-initiated photoinduced polymerization-induced self-assembly and photoinduced seeded reversible addition-fragmentation chain transfer(RAFT)polymerization to prepare a diverse set of core-shell colloidal particles with a well-defined polymer layer.Chemical compositions,structures,and thicknesses of polymer layers could be conveniently regulated by using different types of monomers and feed[monomer]/[chain transfer agent]ratios during seeded RAFT polymerization.
基金supported by the National Natural Science Foundation of China(22022813)the Zhejiang Provincial Natural Science Foundation of China(LQ24B030002)the China Postdoctoral Science Foundation(2022M722729,2023T160571).
文摘Although solid-state polymer electrolytes(SPEs)are expected to solve the safety hazards and limited energy density in the energy storage systems,they still encounter an inferior electrode/electrolyte interface when prepared in an ex situ manner.Recently,in situ polymerization of SPEs favor high interfacial infiltrability,improved interface contact,and reduced interface resistance,owing to the formation of a"superconformal"interface between electrode and electrolyte.Especially,in situ strategies employing ring-opening polymerization(ROP)are emerging as dazzling stars,further enabling moderate polymerization conditions,controllable molecular structure,and reduced interfacial side reaction.As the main monomers that can be in situ polymerized via the ROP strategy,cyclic ethers have been used to construct the CE-SPEs with many merits,including good battery electrochemical performances and a simple assembly process.Here,as a systematic summarization of the existing reports,this review focuses on the polymerization mechanism of ROP,the design principles of CE-SPEs electrolytes,and the recent application of in situ CE-SPEs.In particular,this review thoroughly discusses the selection of different cyclic monomers,initiators and various modification approaches in in situ fabricating CE-SPEs.Ending with offering future challenges and perspectives,this review envisions shedding light on the profound understanding and scientific guidance for further development of high-performance in situ CE-SPEs.
