Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynam...Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.展开更多
Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2...Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.展开更多
Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O...Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.展开更多
Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need fo...Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.展开更多
Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)...Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.展开更多
To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polym...To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.展开更多
With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial c...With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.展开更多
Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimen...Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.展开更多
Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effectiv...Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.展开更多
Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cat...Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.展开更多
Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are ga...Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
Pulmonary diseases have long posed a severe threat to human life and health.The incidence and mortality rates of pulmonary diseases have shown a rising trend year by year,highlighting the urgency of developing safe an...Pulmonary diseases have long posed a severe threat to human life and health.The incidence and mortality rates of pulmonary diseases have shown a rising trend year by year,highlighting the urgency of developing safe and effective therapeutic approaches.In recent years,to address the challenges faced by traditional treatment strategies for pulmonary diseases,the interdisciplinary integration has greatly promoted the rapid development of biomedical polymer materials in the field of pulmonary disease treatment.This review provides a detailed description of the structural characteristics of lung tissue,types of pulmonary diseases,traditional treatment methods,the categories and properties of biomedical polymer materials applied to pulmonary diseases.We systematically elaborate on the applications of biomedical polymer materials in the treatment of different pulmonary diseases and thoroughly discuss their functional roles in pulmonary diseases,particularly in the delivery of therapeutic agents to diseased sites,the formation of pulmonary aerosol formulations,and the facilitation of the effective accumulation of therapeutic agents.The latest research progresses of biomedical polymer materials are also introduced in pulmonary disease treatment.We have highlighted the current challenges and development opportunities of biomedical polymer materials in the treatment of pulmonary diseases,and provide future research directions for biomedical polymer materials in this field.This review will provide valuable reference for the basic research and clinical application of biomedical polymer materials in pulmonary disease treatment.展开更多
Polymer-electrolyte-based solid-state Li metal batteries with high-voltage Ni-rich cathodes are promising energy storage technologies owing to their favorable security and high energy densities.However,operating in wi...Polymer-electrolyte-based solid-state Li metal batteries with high-voltage Ni-rich cathodes are promising energy storage technologies owing to their favorable security and high energy densities.However,operating in wide temperature range and at high voltage is a tough challenge for them.Herein,F/N donating fluorinated-amide-based plasticizers regulated polymer electrolyte capable of enabling high-voltage Li||LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)batteries with excellent performance in wide temperature range is developed.F/N donating fluorinated-amide-based plasticizers significantly improve ionic conductivity(1.52 mS/cm at 30℃),enhance oxidation stability(5.0 V vs.Li^(+)/Li)and fabricate robust LiF/Li_(3)N-rich electrode-electrolyte interphases,which significantly improve the interface stability of Li metal anode and NCM811 cathode.The designed polymer electrolyte is nonflammable and has excellent dimensional stability at 200℃.Capitalizing on these advantageous attributes,the Li||NCM811 cells show excellent cycle stability and rate capability from−20℃ to 60℃ at high voltages(∼4.6 V),and under high-loading full cell condition,which display impressive capacity retention of 84.4%after 1000 cycles and ultrahigh capacity of 154.8 mAh/g at 10 C.This work provides a rational design strategy of polymer electrolytes for wide-temperature high-energy solid-state Li metal batteries.展开更多
Modern power electronics,from electric vehicles to renewable energy systems,demand capacitors that can reliably store high energy at elevated temperatures.Polymer dielectrics are widely used in capacitors due to their...Modern power electronics,from electric vehicles to renewable energy systems,demand capacitors that can reliably store high energy at elevated temperatures.Polymer dielectrics are widely used in capacitors due to their high breakdown strength and ease of processing,but they traditionally suffer from poor energy density at high temperatures[1-4].展开更多
Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited ...Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited by a distinguished Editorial Board headed by Professor Qi-Feng Zhou and supported by an International Advisory Board in which many famous active polymer scientists all over the world are included.展开更多
The effect of local polymer injection on a flat-plate turbulent boundary layer was investigated experimentally,with a particular focus on the distinct mechanisms of drag reduction in the low-drag reduction(LDR)and hig...The effect of local polymer injection on a flat-plate turbulent boundary layer was investigated experimentally,with a particular focus on the distinct mechanisms of drag reduction in the low-drag reduction(LDR)and high-drag reduction(HDR)states.High-resolution measurements of the near-wall flow field were achieved using particle tracking velocimetry(PTV),while large-field measurements covering the entire boundary layer were obtained through particle image velocimetry(PIV).It is found that in the LDR state,the mean shear and turbulence intensity in the near-wall region are mildly suppressed.The influence of polymer solution is limited to the near-wall region and does not affect the self-sustaining cycle of wall-bounded turbulence.Conversely,in the HDR state,the polymer solution effectively disrupts the self-sustaining process of wall-bounded turbulence by suppressing the lifting of the low-speed streaks.Consequently,the turbulence production is attenuated.The buffer layer is extended,and the slope of the log-law region also becomes larger when polymer concentration or the Weissenberg number increases.展开更多
The equilibrium dynamics and nonlinear rheology of unentangled polymer blends remain inadequately understood,especially regarding the influence of short-chain matrix length N_(S) on the structure and rheological behav...The equilibrium dynamics and nonlinear rheology of unentangled polymer blends remain inadequately understood,especially regarding the influence of short-chain matrix length N_(S) on the structure and rheological behavior of dispersed long chains.Using molecular dynamics simulations based on the Kremer-Grest model,we systematically explore the N_(S)-dependence of static conformations,equilibrium dynamics,and nonlinear shear responses in unentangled long-chain/short-chain polymer blends.Our results demonstrate a decoupling between the static and dynamic sensitivity to N_(S):while the static chain size,R_g,follows Flory theory with slight swelling at small N_(S) due to incomplete excluded volume screening,the diffusion coefficient,D,and the relaxation time,τ_(0),exhibit a strong,non-monotonic N_(S)-dependence,transitioning from monomeric friction dominance at small N_(S) to collective segmental rearrangement at large N_(S).Additionally,we observe partial decoupling between the viscous and normal stress responses:while the zero-shear viscosity,η,is strongly N_(S)-dependent,the first and second normal stress coefficients,Ψ_(1) and Ψ_(2),collapse onto universal curves when scaled by the dimensionless shear rate,γτ_(0),suggesting a common mechanism of orientation and stretching.Under shear,long chains compress in the vorticity direction λ_(z)~Wi^(-0.2),which reduces collision frequency and contributes to shear thinning,while the scaling of weaker orientation resistance m_(G)~Wi^(0.35)reflects hydrodynamic screening by the short-chain matrix.These findings highlight the limitations of single-chain models and emphasize the necessity of considering N_(S)-dependent matrix dynamics and flow-induced structural changes in understanding the rheology of unentangled polymer blends.展开更多
Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the...Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.展开更多
Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance b...Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance but are expensive.Therefore,to improve the operational range and survivability of unmanned combat aerial vehicles,a lightweight,high-temperature-resistant,oxidation-resistant,and low-observable composite exhaust nozzle is developed to replace conventional metallic straight-type nozzles.The nozzle features a double serpentine shape to reduce radar and infrared signatures and is manufactured as a monolithic structure using the filament winding process,accommodating the complex geometry and large size(length:1.8 m,width:0.8 m).The exhaust nozzle consists of a ceramic matrix composite made of silicon carbide fibers and a silicon oxycarbide matrix,which absorbs and scatters radio frequency signals while withstanding prolonged exposure to high-temperature(700℃)oxidizing environments typical of engine exhaust gases.The polysiloxane resin used to produce the silicon oxycarbide matrix poses significant challenges owing to its low tackiness and high viscosity variations depending on the presence of nanoparticles,making filament winding difficult.These challenges are addressed by optimizing resin viscosity and winding pattern design.As a result,the tensile strength of the composite specimens fabricated with the optimized viscosity increases by 228.03% before pyrolysis and 97.68%after pyrolysis,compared with that of the non-optimized specimens.In addition,the density and tensile strength of the composite processed via three cycles of polymer infiltration and pyrolysis increased by 13.08% and 80.37%,respectively,compared to those of the non-densified composite.High-temperature oxidation and flame tests demonstrate exceptional thermal and oxidative stability.Furthermore,when compared with carbon fiber-reinforced ceramic matrix composites,the developed composite exhibits a permittivity at least two levels lower and a reflection loss below7 dB within the frequency range of 9.3-10.9 GHz,underscoring its superior electromagnetic stealth performance.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.52293472,22473096 and 22471164)。
文摘Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.
文摘Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.
文摘Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.
基金supported by the National Natural Science Foundation of China(Nos.22322107,22101169 and 22071144)by Shanghai Scientific and Technological Committee(No.22010500300).
文摘Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.
基金supported by the National Natural Science Foundation of China(Grant Nos.52478351,52208329)the Shenzhen Science and Technology Innovation Commission(Grant No.JCYJ20240813143306009)support is gratefully acknowledged.
文摘Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.
基金the support from the Jiangsu Provincial Senior Talent Program (Dengfeng,Jiangsu University)the support from the National Key R&D Program of China (No.2024YFB3612600)+3 种基金the National Natural Science Foundation of China (Nos.22275098,62288102)Basic Research Program of Jiangsu (No.BK20243057)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (No.NY222097)the National Natural Science Foundation of China (No.62205035)。
文摘To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.
基金supported by the National Natural Science Foundation of China(52103299)。
文摘With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.
基金supported by the National Natural Science Foundation of China(22072048)the Guangdong Provincial Department of Science and Technology(2021A1515010128 and 2022A0505050013).
文摘Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.
基金financially supported by the National Natural Science Foundation of China(No.52473338)the National Natural Science Foundation of China(Nos.52173004 and 51873055)+3 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0540000)Advanced Materials-National Science and Technology Major Project(No.2025ZD0614000)Hebei Natural Science Foundation(No.E2022202015)Anhui Province Science and Technology Innovation Tackling Key Project(No.202423i08050025)。
文摘Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.
基金financially supported by the Russian Science Foundation(No.23-13-00205)。
文摘Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.
基金financial support by Guangdong Basic and Applied Basic Research Foundation(2025A1515012415)National Natural Science Foundation of China(52242305)the Stable Support Project of Shenzhen(Project No.20231122125728001).
文摘Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金the National Key Research and Development Program of China(No.2021YFB3800900)Natural Science Foundation of Xiamen,China(No.3502Z202371004)+2 种基金National Natural Science Foundation of China(Nos.52473150,51925305,52173115,51873208,51833010,and 52203183)Fundamental Research Funds for the Central Universities(No.20720230004)the Talent Cultivation Project Funds for the Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province(No.HRTP-[2022]52).
文摘Pulmonary diseases have long posed a severe threat to human life and health.The incidence and mortality rates of pulmonary diseases have shown a rising trend year by year,highlighting the urgency of developing safe and effective therapeutic approaches.In recent years,to address the challenges faced by traditional treatment strategies for pulmonary diseases,the interdisciplinary integration has greatly promoted the rapid development of biomedical polymer materials in the field of pulmonary disease treatment.This review provides a detailed description of the structural characteristics of lung tissue,types of pulmonary diseases,traditional treatment methods,the categories and properties of biomedical polymer materials applied to pulmonary diseases.We systematically elaborate on the applications of biomedical polymer materials in the treatment of different pulmonary diseases and thoroughly discuss their functional roles in pulmonary diseases,particularly in the delivery of therapeutic agents to diseased sites,the formation of pulmonary aerosol formulations,and the facilitation of the effective accumulation of therapeutic agents.The latest research progresses of biomedical polymer materials are also introduced in pulmonary disease treatment.We have highlighted the current challenges and development opportunities of biomedical polymer materials in the treatment of pulmonary diseases,and provide future research directions for biomedical polymer materials in this field.This review will provide valuable reference for the basic research and clinical application of biomedical polymer materials in pulmonary disease treatment.
基金supported by the Science Foundation of High-Level Talents of Wuyi University(Nos.2019AL017,2021AL002).
文摘Polymer-electrolyte-based solid-state Li metal batteries with high-voltage Ni-rich cathodes are promising energy storage technologies owing to their favorable security and high energy densities.However,operating in wide temperature range and at high voltage is a tough challenge for them.Herein,F/N donating fluorinated-amide-based plasticizers regulated polymer electrolyte capable of enabling high-voltage Li||LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)batteries with excellent performance in wide temperature range is developed.F/N donating fluorinated-amide-based plasticizers significantly improve ionic conductivity(1.52 mS/cm at 30℃),enhance oxidation stability(5.0 V vs.Li^(+)/Li)and fabricate robust LiF/Li_(3)N-rich electrode-electrolyte interphases,which significantly improve the interface stability of Li metal anode and NCM811 cathode.The designed polymer electrolyte is nonflammable and has excellent dimensional stability at 200℃.Capitalizing on these advantageous attributes,the Li||NCM811 cells show excellent cycle stability and rate capability from−20℃ to 60℃ at high voltages(∼4.6 V),and under high-loading full cell condition,which display impressive capacity retention of 84.4%after 1000 cycles and ultrahigh capacity of 154.8 mAh/g at 10 C.This work provides a rational design strategy of polymer electrolytes for wide-temperature high-energy solid-state Li metal batteries.
文摘Modern power electronics,from electric vehicles to renewable energy systems,demand capacitors that can reliably store high energy at elevated temperatures.Polymer dielectrics are widely used in capacitors due to their high breakdown strength and ease of processing,but they traditionally suffer from poor energy density at high temperatures[1-4].
文摘Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited by a distinguished Editorial Board headed by Professor Qi-Feng Zhou and supported by an International Advisory Board in which many famous active polymer scientists all over the world are included.
基金supported by the National Natural Science Foundation of China(Grant Nos.12125204,12388101,12502257,12472227)the Project 111 of China(Grant No.B17037)。
文摘The effect of local polymer injection on a flat-plate turbulent boundary layer was investigated experimentally,with a particular focus on the distinct mechanisms of drag reduction in the low-drag reduction(LDR)and high-drag reduction(HDR)states.High-resolution measurements of the near-wall flow field were achieved using particle tracking velocimetry(PTV),while large-field measurements covering the entire boundary layer were obtained through particle image velocimetry(PIV).It is found that in the LDR state,the mean shear and turbulence intensity in the near-wall region are mildly suppressed.The influence of polymer solution is limited to the near-wall region and does not affect the self-sustaining cycle of wall-bounded turbulence.Conversely,in the HDR state,the polymer solution effectively disrupts the self-sustaining process of wall-bounded turbulence by suppressing the lifting of the low-speed streaks.Consequently,the turbulence production is attenuated.The buffer layer is extended,and the slope of the log-law region also becomes larger when polymer concentration or the Weissenberg number increases.
基金financially supported by the National Natural Science Foundation of China(Nos.22341304,22303100 and 12205270)the National Key R&D Program of China(Nos.2023YFA1008800 and 2020YFA0713601)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDC0180303)。
文摘The equilibrium dynamics and nonlinear rheology of unentangled polymer blends remain inadequately understood,especially regarding the influence of short-chain matrix length N_(S) on the structure and rheological behavior of dispersed long chains.Using molecular dynamics simulations based on the Kremer-Grest model,we systematically explore the N_(S)-dependence of static conformations,equilibrium dynamics,and nonlinear shear responses in unentangled long-chain/short-chain polymer blends.Our results demonstrate a decoupling between the static and dynamic sensitivity to N_(S):while the static chain size,R_g,follows Flory theory with slight swelling at small N_(S) due to incomplete excluded volume screening,the diffusion coefficient,D,and the relaxation time,τ_(0),exhibit a strong,non-monotonic N_(S)-dependence,transitioning from monomeric friction dominance at small N_(S) to collective segmental rearrangement at large N_(S).Additionally,we observe partial decoupling between the viscous and normal stress responses:while the zero-shear viscosity,η,is strongly N_(S)-dependent,the first and second normal stress coefficients,Ψ_(1) and Ψ_(2),collapse onto universal curves when scaled by the dimensionless shear rate,γτ_(0),suggesting a common mechanism of orientation and stretching.Under shear,long chains compress in the vorticity direction λ_(z)~Wi^(-0.2),which reduces collision frequency and contributes to shear thinning,while the scaling of weaker orientation resistance m_(G)~Wi^(0.35)reflects hydrodynamic screening by the short-chain matrix.These findings highlight the limitations of single-chain models and emphasize the necessity of considering N_(S)-dependent matrix dynamics and flow-induced structural changes in understanding the rheology of unentangled polymer blends.
基金financially supported by the International Cooperation Program of the Ministry of Science and Technology of Hubei Province(No.2023EHA069)Shenzhen Science and Technology Program(No.JCYJ20230807143702005)the National Foreign Experts Program(No.G2022027015L)。
文摘Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.
基金supported by the Agency for Defense Development Grant Funded by the Korean Government(Grant No.912822501).
文摘Unmanned combat aerial vehicles require lightweight,stealth-capable exhaust systems.However,traditional metallic nozzles increase radar detectability and reduce range,while advanced composites offer high performance but are expensive.Therefore,to improve the operational range and survivability of unmanned combat aerial vehicles,a lightweight,high-temperature-resistant,oxidation-resistant,and low-observable composite exhaust nozzle is developed to replace conventional metallic straight-type nozzles.The nozzle features a double serpentine shape to reduce radar and infrared signatures and is manufactured as a monolithic structure using the filament winding process,accommodating the complex geometry and large size(length:1.8 m,width:0.8 m).The exhaust nozzle consists of a ceramic matrix composite made of silicon carbide fibers and a silicon oxycarbide matrix,which absorbs and scatters radio frequency signals while withstanding prolonged exposure to high-temperature(700℃)oxidizing environments typical of engine exhaust gases.The polysiloxane resin used to produce the silicon oxycarbide matrix poses significant challenges owing to its low tackiness and high viscosity variations depending on the presence of nanoparticles,making filament winding difficult.These challenges are addressed by optimizing resin viscosity and winding pattern design.As a result,the tensile strength of the composite specimens fabricated with the optimized viscosity increases by 228.03% before pyrolysis and 97.68%after pyrolysis,compared with that of the non-optimized specimens.In addition,the density and tensile strength of the composite processed via three cycles of polymer infiltration and pyrolysis increased by 13.08% and 80.37%,respectively,compared to those of the non-densified composite.High-temperature oxidation and flame tests demonstrate exceptional thermal and oxidative stability.Furthermore,when compared with carbon fiber-reinforced ceramic matrix composites,the developed composite exhibits a permittivity at least two levels lower and a reflection loss below7 dB within the frequency range of 9.3-10.9 GHz,underscoring its superior electromagnetic stealth performance.
