A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecula...A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.展开更多
Chloranil through condensation reaction with vicinal diamine such as diaminomaleonitrile produced heterocyclic monomer, p-benzoquinonebis[2,3-b; 2＇,3＇-b＇]pyrazine-5,6-dinitrile. The tetranitrile monomer was cyclo-t...Chloranil through condensation reaction with vicinal diamine such as diaminomaleonitrile produced heterocyclic monomer, p-benzoquinonebis[2,3-b; 2＇,3＇-b＇]pyrazine-5,6-dinitrile. The tetranitrile monomer was cyclo-tetramerised using lithium/pentanol and acetic acid affording the corresponding tetrap-benzoquinone bis[2,3-b; 2＇,3＇-b＇]pyrazinoporphyrazine）]- based network polymer （2H-Pz）. The tetranitril monomer was cyclo-tetramerised using metal salt and quinoline affording the corresponding porphyrazinato-metal II-based network polymers （M-Pz）, M = Co, Ni or Cu. Elemental analytical results, IR and NMR spectral data of the prepared molecules are consistent with their assigned formulations. Molecular masses and metal contents of the synthesized polymers proved to be of high molecular masses which confirm the efficiency of tetramerization polymerization and complexation reactions. The prepared pyrazinoporphyrazines were used as efficient catalysts for the oxidation of thiophenol and benzylthiol to their disulfides in the presence of air atmosphere. The results of oxidation of thiophenol and benzylthiol show that after 15 min the maximum yield of the corresponding disulfides reached 95%, 91%, respectively.展开更多
A new polymeric oxidizing reagent was prepared by supporting periodic acid on poly（1,4-phenylene-2,5-pyridine dicarboxyamide）. This polymeric reagent was used for the selective oxidation of primary benzylic alcohols...A new polymeric oxidizing reagent was prepared by supporting periodic acid on poly（1,4-phenylene-2,5-pyridine dicarboxyamide）. This polymeric reagent was used for the selective oxidation of primary benzylic alcohols to the corresponding benzaldehydes in CH_3CN at reflux conditions.Excellent selectivity was observed between primary benzyl alcohols and secondary ones as well as non-benzylic alcohols in the oxidation reactions.Allylic alcohols were also converted to the corresponding aldehydes with good yields.展开更多
The neodymium complexes with crosslinked polystyrene containing -CH2SH and -CH2SOCH3 groups, P-CH2SH . NdCl3 and P-CH2SOCH3. NdCl3, were prepared. P-CH2SH . NdCl3 shows no catalytic activity for butadiene polymerizati...The neodymium complexes with crosslinked polystyrene containing -CH2SH and -CH2SOCH3 groups, P-CH2SH . NdCl3 and P-CH2SOCH3. NdCl3, were prepared. P-CH2SH . NdCl3 shows no catalytic activity for butadiene polymerization, while P-CH2SOCH3. NdCl3 can catalyze the polymerization of butadiene. The content of cis-1,4-polybutadiene is more than 95%.展开更多
The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd p...The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10^(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.展开更多
Polymer-supported selenovinyl bromide, easily prepared from polymer-supported selenenyl bromide with acetylene, reacts with different Grignard reagents using a step-by-step strategy to obtain （E）-1, 2-disubstituted ...Polymer-supported selenovinyl bromide, easily prepared from polymer-supported selenenyl bromide with acetylene, reacts with different Grignard reagents using a step-by-step strategy to obtain （E）-1, 2-disubstituted ethenes in good yields.展开更多
Tetranuclear Rh-Co bimetallic cluster was synthesized and characterized by IR and XPS. The properties of the anchored catalysts, its stability and the ligand effect were also studied. The experimental results show tha...Tetranuclear Rh-Co bimetallic cluster was synthesized and characterized by IR and XPS. The properties of the anchored catalysts, its stability and the ligand effect were also studied. The experimental results show that the optimal conditions for the hydroformylation of hexene-1 are as follows: the temperature is 80℃, reaction time 8 h, pressure 5. 88×105 Pa, and molar ratio of H2/CO 1. 2/1. 0. Functional groups attached to the donor atom(N) possess more or less some influence on the catalytic behavior. Compared with the homogeneous cluster, the polymer-supported bimetallic cluster is more stable. After the catalytic reaction, the structure of the anchored catalysts was not destroyed. X-ray photoelectron spectroscopy characterization indicates that there is a weak interaction between the polymer support and the active metals.展开更多
Four polymer-supported Fe-Co tetrametallic clusters have been prepared by ion exchange and ligand exchange. Their structures were characterized by IR, UV/visible diffuse reflectance spectra and elemental analysis, and...Four polymer-supported Fe-Co tetrametallic clusters have been prepared by ion exchange and ligand exchange. Their structures were characterized by IR, UV/visible diffuse reflectance spectra and elemental analysis, and by analogy with the reference cluster PhCH_2NMe_3FeCo_3 (CO)_2 . The four heterogenous clusters were efficient catalysts in the hydroformylation of 1-hexene, turnover numbers amounted to 823 — 924 with the yield of 83.2—92.4% heptyl aldehydes and ratios of normal aldehyde to iso-aldehyde of 1.2—1.6, they are facilitated forming the normal aldehyde in comparison with the homogeneous analogue. For the polymer-supported clusters prepared by ion exchange, the polymer-cation parts had no obvious effect on the activity of the cluster anion. The polymer-phosphine substituted cluster prepared by ligand exchange was more stable than the clusters preparedby ion exchange.展开更多
In this study was to investigate, by phase-transfer catalysis, the activity of single and mixed ammonium and phosphonium salts grafted on a 揼el-type?styrene-7% divinylbenzene copolymer in the oxidation of benzyl alco...In this study was to investigate, by phase-transfer catalysis, the activity of single and mixed ammonium and phosphonium salts grafted on a 揼el-type?styrene-7% divinylbenzene copolymer in the oxidation of benzyl alcohol with hydrogen peroxide. A wide variety of catalysts with different quaternary groups and different quaternary chain length substituents were examined. The activity of single 搊nium?salts increases as a consequence of the association of ammonium and phosphonium salts grafted on the same polymeric support. The activity of polymer-supported ammonium and phosphonium salts increases with the number of carbon atoms contained in the alkyl radicals of the onium and of the functionalization degree with phosphonium groups.展开更多
Asymmetric hydrisilylation catalyzed by polymeric thiazolidine rhodium catalystswas conducted. Almost the same optical yields have been obtained when comb-shapedpolymeric ligands and their corresponding monomer comple...Asymmetric hydrisilylation catalyzed by polymeric thiazolidine rhodium catalystswas conducted. Almost the same optical yields have been obtained when comb-shapedpolymeric ligands and their corresponding monomer complexed rhodium cataltystswere used to asymmetric hydrosilylation of acetophenone. Optical yield of chira 1- methylbenzyl alcohol reaches as high as 71.5%. Temperature dependence of enantio- selective hydrosilylation of acetophenone was discussed.展开更多
Some structural factors to the design of polymer-supported Chiral Catalysts arediscussed, and some new approaches for designing of polymer-supported catalysts arereviewed in this paper
文摘A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.
文摘Chloranil through condensation reaction with vicinal diamine such as diaminomaleonitrile produced heterocyclic monomer, p-benzoquinonebis[2,3-b; 2＇,3＇-b＇]pyrazine-5,6-dinitrile. The tetranitrile monomer was cyclo-tetramerised using lithium/pentanol and acetic acid affording the corresponding tetrap-benzoquinone bis[2,3-b; 2＇,3＇-b＇]pyrazinoporphyrazine）]- based network polymer （2H-Pz）. The tetranitril monomer was cyclo-tetramerised using metal salt and quinoline affording the corresponding porphyrazinato-metal II-based network polymers （M-Pz）, M = Co, Ni or Cu. Elemental analytical results, IR and NMR spectral data of the prepared molecules are consistent with their assigned formulations. Molecular masses and metal contents of the synthesized polymers proved to be of high molecular masses which confirm the efficiency of tetramerization polymerization and complexation reactions. The prepared pyrazinoporphyrazines were used as efficient catalysts for the oxidation of thiophenol and benzylthiol to their disulfides in the presence of air atmosphere. The results of oxidation of thiophenol and benzylthiol show that after 15 min the maximum yield of the corresponding disulfides reached 95%, 91%, respectively.
基金The Damghan University Research Council for the partial support of this work
文摘A new polymeric oxidizing reagent was prepared by supporting periodic acid on poly（1,4-phenylene-2,5-pyridine dicarboxyamide）. This polymeric reagent was used for the selective oxidation of primary benzylic alcohols to the corresponding benzaldehydes in CH_3CN at reflux conditions.Excellent selectivity was observed between primary benzyl alcohols and secondary ones as well as non-benzylic alcohols in the oxidation reactions.Allylic alcohols were also converted to the corresponding aldehydes with good yields.
文摘The neodymium complexes with crosslinked polystyrene containing -CH2SH and -CH2SOCH3 groups, P-CH2SH . NdCl3 and P-CH2SOCH3. NdCl3, were prepared. P-CH2SH . NdCl3 shows no catalytic activity for butadiene polymerization, while P-CH2SOCH3. NdCl3 can catalyze the polymerization of butadiene. The content of cis-1,4-polybutadiene is more than 95%.
文摘The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10^(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.
基金We are grateful to the National Natural Science Foundation of China(Project No.20332060)the CAS Academician Foundation of Zhejiang Province.
文摘Polymer-supported selenovinyl bromide, easily prepared from polymer-supported selenenyl bromide with acetylene, reacts with different Grignard reagents using a step-by-step strategy to obtain （E）-1, 2-disubstituted ethenes in good yields.
基金The project supported by National Natural Science Foundation of China
文摘Tetranuclear Rh-Co bimetallic cluster was synthesized and characterized by IR and XPS. The properties of the anchored catalysts, its stability and the ligand effect were also studied. The experimental results show that the optimal conditions for the hydroformylation of hexene-1 are as follows: the temperature is 80℃, reaction time 8 h, pressure 5. 88×105 Pa, and molar ratio of H2/CO 1. 2/1. 0. Functional groups attached to the donor atom(N) possess more or less some influence on the catalytic behavior. Compared with the homogeneous cluster, the polymer-supported bimetallic cluster is more stable. After the catalytic reaction, the structure of the anchored catalysts was not destroyed. X-ray photoelectron spectroscopy characterization indicates that there is a weak interaction between the polymer support and the active metals.
文摘Four polymer-supported Fe-Co tetrametallic clusters have been prepared by ion exchange and ligand exchange. Their structures were characterized by IR, UV/visible diffuse reflectance spectra and elemental analysis, and by analogy with the reference cluster PhCH_2NMe_3FeCo_3 (CO)_2 . The four heterogenous clusters were efficient catalysts in the hydroformylation of 1-hexene, turnover numbers amounted to 823 — 924 with the yield of 83.2—92.4% heptyl aldehydes and ratios of normal aldehyde to iso-aldehyde of 1.2—1.6, they are facilitated forming the normal aldehyde in comparison with the homogeneous analogue. For the polymer-supported clusters prepared by ion exchange, the polymer-cation parts had no obvious effect on the activity of the cluster anion. The polymer-phosphine substituted cluster prepared by ligand exchange was more stable than the clusters preparedby ion exchange.
基金This work was supported by the National Outstanding Youth Fund (Grant No. 20125206) and theNatural Science Foundation of China (Grant Nos. 20272027) which are gratefully acknowledged.
文摘In this study was to investigate, by phase-transfer catalysis, the activity of single and mixed ammonium and phosphonium salts grafted on a 揼el-type?styrene-7% divinylbenzene copolymer in the oxidation of benzyl alcohol with hydrogen peroxide. A wide variety of catalysts with different quaternary groups and different quaternary chain length substituents were examined. The activity of single 搊nium?salts increases as a consequence of the association of ammonium and phosphonium salts grafted on the same polymeric support. The activity of polymer-supported ammonium and phosphonium salts increases with the number of carbon atoms contained in the alkyl radicals of the onium and of the functionalization degree with phosphonium groups.
文摘Asymmetric hydrisilylation catalyzed by polymeric thiazolidine rhodium catalystswas conducted. Almost the same optical yields have been obtained when comb-shapedpolymeric ligands and their corresponding monomer complexed rhodium cataltystswere used to asymmetric hydrosilylation of acetophenone. Optical yield of chira 1- methylbenzyl alcohol reaches as high as 71.5%. Temperature dependence of enantio- selective hydrosilylation of acetophenone was discussed.
文摘Some structural factors to the design of polymer-supported Chiral Catalysts arediscussed, and some new approaches for designing of polymer-supported catalysts arereviewed in this paper
