A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was ...A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was coated on the electrode,therefore the MFC was cheaper and possessed good durability with high performance.The effect of roughness,K3Fe(CN)6 concentration and sprayed air on the performance of the constructed MFC was investigated.Results showed that the roughness of electrode can significantly affect the performance of MFC.The power density of MFC increased by 1.56 times owing to the arithmetic mean roughness which has increased by 1.41 times.With an increasing K3Fe(CN)6 concentration,the performance of MFC also improves.The MFC with K3Fe(CN)6 only(30 mM)showed the highest power density of 1260 mW/m2,which is by 21.4 times and 1.3 times higher than those of MFCs with spraying air only(59 mW/m2)and with K3Fe(CN)6+air(1005 mW/m2),respectively.This showed that the appropriate concentration of K3Fe(CN)6 can significantly improve the power density,while the air has a negative effect when it is sprayed onto K3Fe(CN)6 catholyte.A coulombic efficiency of 34.2%and an energy efficiency of 13.3%with a COD degradation rate of 73.5%were achieved with MFC using K3Fe(CN)6 only.The overpotentials of MFC were also calculated.It can be seen that both theηohmic andηconcentration were very low as compared to theηactivation,and theηconcentration can be ignored because its effect was less than 3 mV.The theoretical calculation suggested that with an increasing conversion rate of K3Fe(CN)6,the cathode potential decreased and reached 0.31 V at a conversion rate of 0.99.While the anode behaves differently for constant pH and changeable pH as the reaction progresses,which reveals that the buffer solution and removal of protons play an important role in maintaining the anode potential.展开更多
Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O...Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.展开更多
Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynam...Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.展开更多
The ionothermal reaction between CuCl_(2),1,4-bis(1,2,4-triazol-1-ylmethyl)benzene(BBTZ),and(NH_(4))_(6)Mo_(7)O_(24) in 1-ethyl-3-methylimidazolium bromide((Emim)Br)led to a new octamolybdate-based coordination polyme...The ionothermal reaction between CuCl_(2),1,4-bis(1,2,4-triazol-1-ylmethyl)benzene(BBTZ),and(NH_(4))_(6)Mo_(7)O_(24) in 1-ethyl-3-methylimidazolium bromide((Emim)Br)led to a new octamolybdate-based coordination polymer(Emim)2[Cu(BBTZ)_(2)(β-Mo_(8)O_(26))](Mo_(8)-CP).Mo_(8)-CP was characterized by elemental analysis,thermogravime-try,IR,powder X-ray diffraction,and single-crystal X-ray diffraction.In Mo_(8)-CP,structural analysis reveals that Cu coordinates with BBTZ ligands to form an interlocked 1D chain.These chains are further bridged by(β-Mo_(8)O_(26))^(4-)to construct a 3D coordination polymer.Notably,(Emim)^(+)acts as a structure-directing agent,occupying the channels of the 3D coordination polymer.Based on this unique structure,the ion exchange properties of Mo_(8)-CP toward rare-earth ions were investigated.It has been found that the luminescent color of the material can be successfully regulat-ed by introducing Eu^(3+)or Tb^(3+)through ion exchange.CCDC:2475110,Mo_(8)-CP.展开更多
The morphology of active layer plays a critical role in determining the photovoltaic performance of organic solar cells(OSCs).However,binary blends often suffer from suboptimal phase separation,which limits the effici...The morphology of active layer plays a critical role in determining the photovoltaic performance of organic solar cells(OSCs).However,binary blends often suffer from suboptimal phase separation,which limits the efficiency of OSCs.Herein,two bridging polymer acceptors(PAs)—benzodithiophene-(2-ethylhexyl)oxy(BDT-C2C4)and benzodithiophene-octyloxy(BDT-C_(8))—are designed and synthesized by combining a benzodithiophene(BDT)unit as the donor moiety[poly({4,8-bis[5-(2-ethylhexyl)-4-fluorothiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}){5,8-bis[4-(2-butyloctyl)thiophen-2-yl]dithieno[3',2':3,4]},D18],and a 2,2′-((2Z,2′Z)-{[12,13-Bis(2-butyloctyl)-12,13-dihydro-3,9-dinonylthieno[2,3]thieno[3,2-b]pyrrolo[4,5-g]thieno[2,3-b]indole-2,10-diyl]bis(methanylylidene)}bis(3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(Y6)derivative as the acceptor moiety.BDT-C2C4 and BDT-C_(8) are functionalized with(2-ethylhexyl)oxy and octyloxy side chains on the BDT unit,respectively.Both PAs show complementary absorption and cascaded energy levels with the donor D18 and the acceptor 2,2′-((2Z,2′Z)-{[12,13-bis(3-ethylheptyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″∶4′,5′]thieno[2′,3′∶4,5]pyrrolo[3,2-g]thieno[2′,3′∶4,5]thieno[3,2-b]indole-2,10-diyl]bis(meth⁃aneylylidene)}bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(N3),but BDT-C_(8) exhibits better compatibility with D18 and N3 compared to BDT-C2C4.When incorporated as a third component into the D18∶N3 blend,both PAs improve the active layer morphology.In particular,the D18∶N3∶BDT-C_(8) blend shows significantly optimized morphology,featuring reduced phase separation and a fibrous network structure.As a result,the device based on D18∶N3∶BDT-C_(8) achieves a power conversion efficiency of 18.18%,significantly higher than that of the device based on D18∶N3(ca.17.37%).This work presents a compatibilizer strategy for optimizing blend morphology towards high-performance ternary OSCs.展开更多
A new principle for producing fire-resistant polymer materials with increased deformation properties using a flame retardant not as a heterogeneous additive,but as a thermoplastic flame retardant in a hybrid polymer m...A new principle for producing fire-resistant polymer materials with increased deformation properties using a flame retardant not as a heterogeneous additive,but as a thermoplastic flame retardant in a hybrid polymer mixture with a polyhydrocarbon is considered.Hybrid polymer blends of low-molecular ammonium polyphosphate(APP)with an ethylene-vinyl acetate copolymer(EVA)with an APP content of 80 wt%with enhanced deformation properties were obtained by extrusion mixing at various temperatures in the range from 200°C to 250°C.A chemical scheme for the transformations of the components during the formation of the composite is proposed.X-ray diffraction analysis showed the formation of new crystalline structures of APP.The phase structure of the systems corresponding to the model of a dispersed-filled composite in which EVA plays the role of a matrix,determining the deformation of the mixture,and the filler is ammonium polyphosphate,was studied by scanning electron microscopy(SEM).The method of FTIR microscopy showed chemical interactions between EVA and APP with the formation of amide groups.The conditions for obtaining compositions characterized by heat resistance of 210°C,oxygen index of 55 and ultimate elongation at drawing of 213%were established.展开更多
Commercial-level sodium metal batteries require electrolytes with high ionic mobility and excellent thermo-mechanical and electrochemical stability.Conventional flammable liquid electrolytes,prone to dendrite growth a...Commercial-level sodium metal batteries require electrolytes with high ionic mobility and excellent thermo-mechanical and electrochemical stability.Conventional flammable liquid electrolytes,prone to dendrite growth and unstable interfacial reactions,rarely perform beyond coin-cell demonstrations.To address these shortcomings,a multifunctional composite quasi-solid polymer electrolyte(QSPE)that incorporates boron nitride(BN)as an engineered filler in a highly conductive polymer blend system has been developed.The optimized formation(15BN QSPE)delivers a room-temperature ionic conductivity of 2.15 m S cm^(-1)and a sodium-ion transference number of 0.80.Molecular dynamics simulations elucidate the coordination environment and show improved transport in the presence of BN.BN is chemically active and bifunctional:boron acts as an electron acceptor,interacting with solvents and macromolecules,while nitrogen coordinates with sodium ions,tailoring the solvation environment and transport pathways to promote efficient ion migration.The 15BN QSPE is self-extinguishing,resists oxidative thermal degradation,and enables stable cycling in symmetric sodium cells for>1400 h at0.5 m A cm^(-2).A Prussian blue full cell achieves>1500 stable cycles at 1C with -99% Coulombic efficiency in coin-cell configuration.A two-layer pouch cell with dual 15BN QSPE layers delivers 600 stable cycles at 0.125C and withstands rigorous mechanical abuse.These results position 15BN QSPE as a scalable,highperformance electrolyte offering enhanced safety and efficiency for next-generation sodium metal batteries.展开更多
Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)...Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.展开更多
Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the...Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.展开更多
Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon ...Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.展开更多
With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial c...With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.展开更多
Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need fo...Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.展开更多
Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimen...Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.展开更多
Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,...Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.展开更多
Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2...Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.展开更多
To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polym...To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.展开更多
Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are ga...Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.展开更多
In this review,the synthesis,functions,and applications of the polymers containing germanium and tin,which are heavy group 14 elements,in their polymer frameworks are summarized.Germanium and tin can form similar skel...In this review,the synthesis,functions,and applications of the polymers containing germanium and tin,which are heavy group 14 elements,in their polymer frameworks are summarized.Germanium and tin can form similar skeletal structures with their homologues carbon and silicon,whereas the polymers containing germanium and tin show unique properties derived from their large atomic radii and weak binding energies.For example,polygermane and polystannane exhibited light absorption in the UV–visible region and conductivity because of theσ-conjugation through the polymer main-chain constructed byσ-bonds between heavy elements.Theσ-conjugation was affected by the conformational change of the polymer main-chain,and thermochromic properties can be induced.Furthermore,the weak bonds were able to be cleaved homolytically upon photoirradiation,and radicals were subsequently generated.By incorporating hypervalent heavy elements into theπ-conjugated system,it was possible to modulate the electronic structures of theπ-conjugated system throughσ*–π*conjugation with highly coordinated elements.Finally,applications for organic solar cells,organic lightemitting materials,and chemical sensors have been achieved.Herein,representative synthetic methods and unique properties for creating smart materials with germanium and tin will be explained.展开更多
The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in productio...The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in production highlight the necessity of recycling spent graphite(SG).However,SG recycling technologies remain markedly underdeveloped compared to the cathode recovery status,due to perceived lower economic value.This review provides an in-depth analysis of the current SG growth trend and highlights the cost accounting for graphite recycling and the significant importance of advanced recycling technologies.By examining the failure mechanisms of graphite,various recycling and upcycling technologies in both practical application and fundamental research are fully discussed,in terms of the regeneration principle,recycling effect,strengths,and limitations of each method.Furthermore,the multi-purpose applications of recycled graphite beyond LIB anodes are explored to enhance its high-value properties.Finally,the prospects of SG recycling and large-scale application challenges are presented,including economic feasibility,process optimization,and regulatory restrictions.This review provides a comprehensive overview of developments in SG recycling strategies,offering valuable insights for narrowing the gap between fundamental research and practical applications.展开更多
Antibiotics,as an emerging pollutant due to their extensive use and difficulty in biodegradation,can cause harm to health through bioaccumulation.To address this,various photocatalysts have been developed for rapid an...Antibiotics,as an emerging pollutant due to their extensive use and difficulty in biodegradation,can cause harm to health through bioaccumulation.To address this,various photocatalysts have been developed for rapid antibiotic removal.However,their low concentrations limit mass transfer efficiency,resulting in suboptimal performance.Adsorption is crucial for enhancing photocatalytic efficiency.In this study,a series of binary heterojunction catalysts(x%BWO@STHP)were synthesized,consisting of Bi_(2)WO_(6)(BWO)grafted with sulfonated triptycene-based hypercrosslinked polymer(STHP).The high specific surface area of STHP,combined withπ-πconjugation and ionic interactions with antibiotics,significantly enhances adsorption capacity.This facilitates effective contact between low-concentration pollutants in aqueous solutions and the active sites of the catalyst.The formation of a Z-scheme heterojunction between BWO and STHP facilitates photogenerated charge separation,and further significantly improves photocatalytic degradation performance.Specifically,the 20%BWO@STHP catalyst achieved rapid adsorption equilibrium for oxytetracycline(OTC),doxycycline(DOX),and tetracycline(TC)within 2 min and completely degraded them after 15 min of irradiation.Compared to pristine BWO,the photocatalytic reaction rate constants are significantly increased,being 9.69 times higher for OTC and 13.45 times higher for DOX.The catalyst exhibits excellent reusability and holds promising potential for practical applications.展开更多
基金The authors would like to thank the Federal Ministry of Education and Research(Bundesministerium für Bildung und Forschung),BMBF,Germany,for funding parts of this study under the contract No.02WER1317D.
文摘A Microbial fuel cell(MFC)with metal free polymer/graphite electrodes(150 mm×150 mm)was constructed.The electrodes with flowing channels,which were different in roughness,were designed.No additional catalyst was coated on the electrode,therefore the MFC was cheaper and possessed good durability with high performance.The effect of roughness,K3Fe(CN)6 concentration and sprayed air on the performance of the constructed MFC was investigated.Results showed that the roughness of electrode can significantly affect the performance of MFC.The power density of MFC increased by 1.56 times owing to the arithmetic mean roughness which has increased by 1.41 times.With an increasing K3Fe(CN)6 concentration,the performance of MFC also improves.The MFC with K3Fe(CN)6 only(30 mM)showed the highest power density of 1260 mW/m2,which is by 21.4 times and 1.3 times higher than those of MFCs with spraying air only(59 mW/m2)and with K3Fe(CN)6+air(1005 mW/m2),respectively.This showed that the appropriate concentration of K3Fe(CN)6 can significantly improve the power density,while the air has a negative effect when it is sprayed onto K3Fe(CN)6 catholyte.A coulombic efficiency of 34.2%and an energy efficiency of 13.3%with a COD degradation rate of 73.5%were achieved with MFC using K3Fe(CN)6 only.The overpotentials of MFC were also calculated.It can be seen that both theηohmic andηconcentration were very low as compared to theηactivation,and theηconcentration can be ignored because its effect was less than 3 mV.The theoretical calculation suggested that with an increasing conversion rate of K3Fe(CN)6,the cathode potential decreased and reached 0.31 V at a conversion rate of 0.99.While the anode behaves differently for constant pH and changeable pH as the reaction progresses,which reveals that the buffer solution and removal of protons play an important role in maintaining the anode potential.
文摘Under solvothermal conditions,1,4‑naphthalenedicarboxylic acid(H_(2)ndc)and 9,9′‑dihexyl‑2,7‑di(pyridin‑4‑yl)fluorene(hfdp)reacted with Co^(2+)ions and Cd^(2+)ions to form two coordination polymers,[Co(hfdp)(ndc)(H2O)]·DMA}n(1)and{[Cd(hfdp)(ndc)(H_(2)O)]·DMA}_(n)(2),respectively(DMA=N,N‑dimethylacetamide).Single‑crystal X‑ray diffraction analyses showed that both complexes 1 and 2 contain similar structures.Topological analysis indicates that complexes 1 and 2 have a{44·62}planar structure.In addition,both complexes reveal good thermal stability and fluorescence sensing performance.They exhibited good sensitivity and selectivity towards 2,4,6‑trinitrophenol(TNP)by fluorescent quenching.The limits of detection of 1 and 2 for TNP were 0.107 and 0.327μmol·L^(-1),respectively.CCDC:2475515,1;2475516,2.
基金Supported by the National Natural Science Foundation of China(Nos.52293472,22473096 and 22471164)。
文摘Among various architectures of polymers,end-group-free rings have attracted growing interests due to their distinct physicochemical performances over the linear counterparts which are exemplified by reduced hydrodynamic size and slower degradation.It is key to develop facile methods to large-scale synthesis of polymer rings with tunable compositions and microstructures.Recent progresses in large-scale synthesis of polymer rings against single-chain dynamic nanoparticles,and the example applications in synchronous enhancing toughness and strength of polymer nanocomposites are summarized.Once there is the breakthrough in rational design and effective large-scale synthesis of polymer rings and their functional derivatives,a family of cyclic functional hybrids would be available,thus providing a new paradigm in developing polymer science and engineering.
文摘The ionothermal reaction between CuCl_(2),1,4-bis(1,2,4-triazol-1-ylmethyl)benzene(BBTZ),and(NH_(4))_(6)Mo_(7)O_(24) in 1-ethyl-3-methylimidazolium bromide((Emim)Br)led to a new octamolybdate-based coordination polymer(Emim)2[Cu(BBTZ)_(2)(β-Mo_(8)O_(26))](Mo_(8)-CP).Mo_(8)-CP was characterized by elemental analysis,thermogravime-try,IR,powder X-ray diffraction,and single-crystal X-ray diffraction.In Mo_(8)-CP,structural analysis reveals that Cu coordinates with BBTZ ligands to form an interlocked 1D chain.These chains are further bridged by(β-Mo_(8)O_(26))^(4-)to construct a 3D coordination polymer.Notably,(Emim)^(+)acts as a structure-directing agent,occupying the channels of the 3D coordination polymer.Based on this unique structure,the ion exchange properties of Mo_(8)-CP toward rare-earth ions were investigated.It has been found that the luminescent color of the material can be successfully regulat-ed by introducing Eu^(3+)or Tb^(3+)through ion exchange.CCDC:2475110,Mo_(8)-CP.
文摘The morphology of active layer plays a critical role in determining the photovoltaic performance of organic solar cells(OSCs).However,binary blends often suffer from suboptimal phase separation,which limits the efficiency of OSCs.Herein,two bridging polymer acceptors(PAs)—benzodithiophene-(2-ethylhexyl)oxy(BDT-C2C4)and benzodithiophene-octyloxy(BDT-C_(8))—are designed and synthesized by combining a benzodithiophene(BDT)unit as the donor moiety[poly({4,8-bis[5-(2-ethylhexyl)-4-fluorothiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}){5,8-bis[4-(2-butyloctyl)thiophen-2-yl]dithieno[3',2':3,4]},D18],and a 2,2′-((2Z,2′Z)-{[12,13-Bis(2-butyloctyl)-12,13-dihydro-3,9-dinonylthieno[2,3]thieno[3,2-b]pyrrolo[4,5-g]thieno[2,3-b]indole-2,10-diyl]bis(methanylylidene)}bis(3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(Y6)derivative as the acceptor moiety.BDT-C2C4 and BDT-C_(8) are functionalized with(2-ethylhexyl)oxy and octyloxy side chains on the BDT unit,respectively.Both PAs show complementary absorption and cascaded energy levels with the donor D18 and the acceptor 2,2′-((2Z,2′Z)-{[12,13-bis(3-ethylheptyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3″∶4′,5′]thieno[2′,3′∶4,5]pyrrolo[3,2-g]thieno[2′,3′∶4,5]thieno[3,2-b]indole-2,10-diyl]bis(meth⁃aneylylidene)}bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile(N3),but BDT-C_(8) exhibits better compatibility with D18 and N3 compared to BDT-C2C4.When incorporated as a third component into the D18∶N3 blend,both PAs improve the active layer morphology.In particular,the D18∶N3∶BDT-C_(8) blend shows significantly optimized morphology,featuring reduced phase separation and a fibrous network structure.As a result,the device based on D18∶N3∶BDT-C_(8) achieves a power conversion efficiency of 18.18%,significantly higher than that of the device based on D18∶N3(ca.17.37%).This work presents a compatibilizer strategy for optimizing blend morphology towards high-performance ternary OSCs.
基金financially supported by Ministry of Science and Higher Education of the Russian Federation.
文摘A new principle for producing fire-resistant polymer materials with increased deformation properties using a flame retardant not as a heterogeneous additive,but as a thermoplastic flame retardant in a hybrid polymer mixture with a polyhydrocarbon is considered.Hybrid polymer blends of low-molecular ammonium polyphosphate(APP)with an ethylene-vinyl acetate copolymer(EVA)with an APP content of 80 wt%with enhanced deformation properties were obtained by extrusion mixing at various temperatures in the range from 200°C to 250°C.A chemical scheme for the transformations of the components during the formation of the composite is proposed.X-ray diffraction analysis showed the formation of new crystalline structures of APP.The phase structure of the systems corresponding to the model of a dispersed-filled composite in which EVA plays the role of a matrix,determining the deformation of the mixture,and the filler is ammonium polyphosphate,was studied by scanning electron microscopy(SEM).The method of FTIR microscopy showed chemical interactions between EVA and APP with the formation of amide groups.The conditions for obtaining compositions characterized by heat resistance of 210°C,oxygen index of 55 and ultimate elongation at drawing of 213%were established.
基金a seed grant from IIT Delhi(SGNF148)supported by the JST-ERATO Yamauchi Materials SpaceTectonics Project(JPMJER2003)+2 种基金the ARC Australian Laureate Fellowship(FL230100095)the UQ-Yonsei International Joint Research Projectthe support from JSPS Postdoctoral Fellowships for Research in Japan。
文摘Commercial-level sodium metal batteries require electrolytes with high ionic mobility and excellent thermo-mechanical and electrochemical stability.Conventional flammable liquid electrolytes,prone to dendrite growth and unstable interfacial reactions,rarely perform beyond coin-cell demonstrations.To address these shortcomings,a multifunctional composite quasi-solid polymer electrolyte(QSPE)that incorporates boron nitride(BN)as an engineered filler in a highly conductive polymer blend system has been developed.The optimized formation(15BN QSPE)delivers a room-temperature ionic conductivity of 2.15 m S cm^(-1)and a sodium-ion transference number of 0.80.Molecular dynamics simulations elucidate the coordination environment and show improved transport in the presence of BN.BN is chemically active and bifunctional:boron acts as an electron acceptor,interacting with solvents and macromolecules,while nitrogen coordinates with sodium ions,tailoring the solvation environment and transport pathways to promote efficient ion migration.The 15BN QSPE is self-extinguishing,resists oxidative thermal degradation,and enables stable cycling in symmetric sodium cells for>1400 h at0.5 m A cm^(-2).A Prussian blue full cell achieves>1500 stable cycles at 1C with -99% Coulombic efficiency in coin-cell configuration.A two-layer pouch cell with dual 15BN QSPE layers delivers 600 stable cycles at 0.125C and withstands rigorous mechanical abuse.These results position 15BN QSPE as a scalable,highperformance electrolyte offering enhanced safety and efficiency for next-generation sodium metal batteries.
基金supported by the National Natural Science Foundation of China(Grant Nos.52478351,52208329)the Shenzhen Science and Technology Innovation Commission(Grant No.JCYJ20240813143306009)support is gratefully acknowledged.
文摘Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.
基金financially supported by the International Cooperation Program of the Ministry of Science and Technology of Hubei Province(No.2023EHA069)Shenzhen Science and Technology Program(No.JCYJ20230807143702005)the National Foreign Experts Program(No.G2022027015L)。
文摘Liver is a vital organ in the human body and plays a central role in the metabolism and detoxification of endotoxins and exotoxins.Bilirubin is an endotoxin derived from hemoglobin(Hb).Removing excess bilirubin in the blood is crucial for the treatment of liver diseases.Hemoperfusion,which relies on adsorbents to efficiently adsorb toxins,is a widely applied procedure for the removal of blood toxins.To broaden and improve the range and performance of hemoperfusion adsorbents,we synthesized cationic hyper crosslinked polymers(HCPs)with strong affinity for bilirubin.This material exhibited outstanding adsorption performance,with a maximum adsorption capacity of 934 mg/g and a removal efficiency of 96%.Further investigation confirmed their excellent selectivity,reusability,and biocompatibility.These findings expand the potential applications of HCPs and provide insight into strategies for constructing promising hemoperfusion adsorbent materials.
基金supported by European Union's Horizon Europe,UK Research and Innovation(UKRI).
文摘Graphite,encompassing both natural graphite and synthetic graphite,and graphene,have been extensively utilized and investigated as anode materials and additives in lithium-ion batteries(LIBs).In the pursuit of carbon neutrality,LIBs are expected to play a pivotal role in reducing CO_(2)emissions by decreasing reliance on fossil fuels and enabling the integration of renewable energy sources.Owing to their technological maturity and exceptional electrochemical performance,the global production of graphite and graphene for LIBs is projected to continue expanding.Over the past decades,numerous researchers have concentrated on reducing the material and energy input whilst optimising the electrochemical performance of graphite and graphene,through novel synthesis methods and various modifications at the laboratory scale.This review provides a comprehensive examination of the manufacturing methods,environmental impact,research progress,and challenges associated with graphite and graphene in LIBs from an industrial perspective,with a particular focus on the carbon footprint of production processes.Additionally,it considers emerging challenges and future development directions of graphite and graphene,offering significant insights for ongoing and future research in the field of green LIBs.
基金supported by the National Natural Science Foundation of China(52103299)。
文摘With the global push for energy conservation and the rapid development of low-power,flexible and wearable optical displays,the demand for electrochromic technology has surged.Gel polymer electrolytes(GPEs),a crucial component of electrochromic devices(ECDs),show great promise in applications.This is attributed to their efficient ion-transport capabilities,excellent mechanical properties and strong adhesion.All of these characteristics are conducive to enhancing the safety of the devices,streamlining the packaging process,significantly improving the electrochromic performance of ECDs and boosting their commercial application potential.This review provides a comprehensive overview of GPEs for ECDs,focusing on their basic designs,functional modifications and practical applications.Firstly,this review outlines the fundamental design of GPEs for ECDs,encompassing key performance index,classification,gelation mechanism and preparation methods.Building on this foundation,it provides an in-depth discussion of functionalized GPEs developed to enhance device performance or expand functionality,including electrochromic,temperature-responsive,photo-responsive and stretchable self-healing GPE.Furthermore,the integration of GPEs into various ECD applications,including smart windows,displays,energy storage devices and wearable electronic,are summarized to highlight the advantages that the design of GPEs brings to the practical application of ECDs.Finally,based on the summary of GPEs employed for ECDs,the challenges and development expectations in this direction were indicated.
基金supported by the National Natural Science Foundation of China(Nos.22322107,22101169 and 22071144)by Shanghai Scientific and Technological Committee(No.22010500300).
文摘Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.
基金supported by the National Natural Science Foundation of China(22072048)the Guangdong Provincial Department of Science and Technology(2021A1515010128 and 2022A0505050013).
文摘Succinonitrile(SN)-based polymer plastic crystal electrolytes(PPCEs)are regarded as promising candidates for lithium metal batteries but suffer from serious side reactions with Li metal.Herein,we propose a multi-dimensional optimization strategy to alleviate the side reactions between SN and Li metal,and develop a highly stable poly-vinylethylene carbonate-based PPCE(PPCE-VEC).Moreover,we identify the intrinsic factors of multi-dimensional polymer structures on the electrolyte stability by three typical classes of polyesters.The PPCE-VEC constructed by in situ polymerization exhibits much better stability than poly-vinylene carbonate-based PPCE(PPCE-VCA)and poly-trifluoroethyl acrylate-based PPCE(PPCE-TFA),which is verified by its fewer SN-decomposition species in X-ray photoelectron spectroscopy(XPS)and outstanding full cell performance.The PPCE-VEC-enabled LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)full cell achieve 73.7%capacity retention after 1400 cycles,which outperforms PPCE-VCA-and PPCE-TFA-enabled full cells(61.9%and 46.9%).Spectral analysis and theoretical calculation reveal that the high solvation ability of the carbonyl site,flexible polymer chain,and homogeneous electrolyte phase of PPCE-VEC are favorable to maximizing competition coordination with Li^(+)to weaken the Li^(+)–SN binding and shape an anion-rich solvation structure.This optimized polymer-involved Li^(+)solvation enhances SN stability and facilitates the formation of B/F enriched solid-electrolyte interphase(SEI),thus significantly improving PPCE stability.
基金supported by the National Key Research and Development Program of China(2024YFA1612900)the National Natural Science Foundation of China(Grant No.52103365 and No.12375270)the Guangdong Innovative and Entrepreneurial Research Team Program,China(Grant No.2021ZT09L227).
文摘Fine-grained nuclear graphite is a key material in high-temperature gas-cooled reactors(HTGRs).During air ingress accidents,core graphite components undergo severe oxidation,threatening structural integrity.Therefore,understanding the oxidation behavior of nuclear graphite is essential for reactor safety.The influence of oxidation involves multiple factors,including temperature,sample size,oxidant,impurities,filler type and size,etc.The size of the filler particles plays a crucial role in this study.Five ultrafine-and superfine-grained nuclear graphite samples(5.9-34.4μm)are manufactured using identical raw materials and manufacturing processes.Isothermal oxidation tests conducted at 650℃-750℃ are used to study the oxidation behavior.Additionally,comprehensive characterization is performed to analyze the crystal structure,surface morphology,and nanoscale to microscale pore structure of the samples.Results indicate that oxidation behavior cannot be predicted solely based on filler grain size.Reactive site concentration,characterized by active surface area,dominates the chemical reaction kinetics,whereas pore tortuosity,quantified by the structural parameterΨ,plays a key role in regulating oxidant diffusion.These findings clarify the dual role of microstructure in oxidation mechanisms and establish a theoretical and experimental basis for the design of high-performance nuclear graphite capable of long-term service in high-temperature gas-cooled reactors.
文摘Four distinct coordination polymers(CPs)were successfully synthesized by altering solvent types and adjusting ligand concentrations,and their crystal structures were investigated.[Co(L)(FDCA)(H_(2)O)_(2)]·0.5H_(2)O(1)was synthesized as a 2D structure using Coas the metal source,methanol‑water(4∶6,V/V)as the solvent,and specific concentrations of 2,5‑furandicarboxylic acid(H_(2)FDCA)and 1,3,5‑triimidazole benzene(L).Adjusting to pure water and lowering the concentration of L yielded the 1D chain structure of[Co(HL)2(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(2).Using Cu(Ⅱ)as the metal source,methanol/water(9∶1,V/V)as the solvent,and specific concentrations of L and H2FDCA,the 1D chain structure of[Cu(L)(FDCA)(H_(2)O)]·2H_(2)O(3)was synthesized.Upon increasing the concentrations of L and H2FDCA,and switching the solvent to pure water,the 1D chain structure of[Cu(HL)_(2)(H_(2)O)_(2)](FDCA)_(2)·6H_(2)O(4)was obtained.This shows that changing the solvent and ligand concentrations can affect the structural changes of CPs.In addition,the solid‑state photoluminescence of CPs 1‑4 at room temperature was studied,and their morphological changes were observed via scanning electron microscopy.Density functional theory calculations revealed that the negative charge concentrates on the O and N atoms of the ligand,facilitating ligand‑metal ion coordination.CCDC:2403934,1;2403935,2;2403936,3;2403938,4.
基金the support from the Jiangsu Provincial Senior Talent Program (Dengfeng,Jiangsu University)the support from the National Key R&D Program of China (No.2024YFB3612600)+3 种基金the National Natural Science Foundation of China (Nos.22275098,62288102)Basic Research Program of Jiangsu (No.BK20243057)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (No.NY222097)the National Natural Science Foundation of China (No.62205035)。
文摘To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.
基金financial support by Guangdong Basic and Applied Basic Research Foundation(2025A1515012415)National Natural Science Foundation of China(52242305)the Stable Support Project of Shenzhen(Project No.20231122125728001).
文摘Thermoelectric(TE)materials,being capable of converting waste heat into electricity,are pivotal for sustainable energy solutions.Among emerging TE materials,organic TE materials,particularly conjugated polymers,are gaining prominence due to their unique combination of mechanical flexibility,environmental compatibility,and solution-processable fabrication.A notable candidate in this field is poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene)(PBTTT),a liquid-crystalline conjugated polymer,with high charge carrier mobility and adaptability to melt-processing techniques.Recent advancements have propelled PBTTT’s figure of merit from below 0.1 to a remarkable 1.28 at 368 K,showcasing its potential for practical applications.This review systematically examines strategies to enhance PBTTT’s TE performance through doping(solution,vapor,and anion exchange doping),composite engineering,and aggregation state controlling.Recent key breakthroughs include ion exchange doping for stable charge modulation,multi-heterojunction architectures reducing thermal conductivity,and proton-coupled electron transfer doping for precise Fermi-level tuning.Despite great progress,challenges still persist in enhancing TE conversion efficiency,balancing or decoupling electrical conductivity,Seebeck coefficient and thermal conductivity,and leveraging melt-processing scalability of PBTTT.By bridging fundamental insights with applied research,this work provides a roadmap for advancing PBTTT-based TE materials toward efficient energy harvesting and wearable electronics.
基金supported by Japan Society for the Promotion of Science(JSPS),a Grant-in-Aid for Scientific Research(B)(JP23K23398)(for M.G.)and(JP24K01570)(for K.T.).
文摘In this review,the synthesis,functions,and applications of the polymers containing germanium and tin,which are heavy group 14 elements,in their polymer frameworks are summarized.Germanium and tin can form similar skeletal structures with their homologues carbon and silicon,whereas the polymers containing germanium and tin show unique properties derived from their large atomic radii and weak binding energies.For example,polygermane and polystannane exhibited light absorption in the UV–visible region and conductivity because of theσ-conjugation through the polymer main-chain constructed byσ-bonds between heavy elements.Theσ-conjugation was affected by the conformational change of the polymer main-chain,and thermochromic properties can be induced.Furthermore,the weak bonds were able to be cleaved homolytically upon photoirradiation,and radicals were subsequently generated.By incorporating hypervalent heavy elements into theπ-conjugated system,it was possible to modulate the electronic structures of theπ-conjugated system throughσ*–π*conjugation with highly coordinated elements.Finally,applications for organic solar cells,organic lightemitting materials,and chemical sensors have been achieved.Herein,representative synthetic methods and unique properties for creating smart materials with germanium and tin will be explained.
基金funded by the National Key Research and Development Program of China(grant no.2023YFB3809300)Longzhong Laboratory Research Project(grant no.2024KF-20)+4 种基金the National Science Foundation of China(grant no.52373306)the Key Research and Development Program Project of Hubei Province(grant no.2023BAB140,2024BAA013)the Natural Science Foundation of Hubei Province(grant no.2023AFA053)the Key Research and Development Program of Henan Province(grant no.251111240100)the Postdoctoral Fellowship Program of CPSF(grant no.GZB20230553)。
文摘The extensive application of lithium-ion batteries in electric vehicles has led to a torrential surge of endof-life batteries.As the dominant anode material,graphite's environmental and resource costs in production highlight the necessity of recycling spent graphite(SG).However,SG recycling technologies remain markedly underdeveloped compared to the cathode recovery status,due to perceived lower economic value.This review provides an in-depth analysis of the current SG growth trend and highlights the cost accounting for graphite recycling and the significant importance of advanced recycling technologies.By examining the failure mechanisms of graphite,various recycling and upcycling technologies in both practical application and fundamental research are fully discussed,in terms of the regeneration principle,recycling effect,strengths,and limitations of each method.Furthermore,the multi-purpose applications of recycled graphite beyond LIB anodes are explored to enhance its high-value properties.Finally,the prospects of SG recycling and large-scale application challenges are presented,including economic feasibility,process optimization,and regulatory restrictions.This review provides a comprehensive overview of developments in SG recycling strategies,offering valuable insights for narrowing the gap between fundamental research and practical applications.
基金the financial support provided by the National Natural Science Foundation of China(22478267,22438009,U24A20535)Basic Research Program of Jiangsu province(BK20243002)+1 种基金Prospective Application Research Project of Suzhou(SYC2022042)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD).
文摘Antibiotics,as an emerging pollutant due to their extensive use and difficulty in biodegradation,can cause harm to health through bioaccumulation.To address this,various photocatalysts have been developed for rapid antibiotic removal.However,their low concentrations limit mass transfer efficiency,resulting in suboptimal performance.Adsorption is crucial for enhancing photocatalytic efficiency.In this study,a series of binary heterojunction catalysts(x%BWO@STHP)were synthesized,consisting of Bi_(2)WO_(6)(BWO)grafted with sulfonated triptycene-based hypercrosslinked polymer(STHP).The high specific surface area of STHP,combined withπ-πconjugation and ionic interactions with antibiotics,significantly enhances adsorption capacity.This facilitates effective contact between low-concentration pollutants in aqueous solutions and the active sites of the catalyst.The formation of a Z-scheme heterojunction between BWO and STHP facilitates photogenerated charge separation,and further significantly improves photocatalytic degradation performance.Specifically,the 20%BWO@STHP catalyst achieved rapid adsorption equilibrium for oxytetracycline(OTC),doxycycline(DOX),and tetracycline(TC)within 2 min and completely degraded them after 15 min of irradiation.Compared to pristine BWO,the photocatalytic reaction rate constants are significantly increased,being 9.69 times higher for OTC and 13.45 times higher for DOX.The catalyst exhibits excellent reusability and holds promising potential for practical applications.
