This study presents a state of the art of several studies dealing with the environmental impact assessment of fuel cell (FC) vehicles and the comparison with their conventional fossil-fuelled counterparts, by means of...This study presents a state of the art of several studies dealing with the environmental impact assessment of fuel cell (FC) vehicles and the comparison with their conventional fossil-fuelled counterparts, by means of the Life Cycle As-sessment (LCA) methodology. Results declare that, depending on the systems characteristics, there are numerous envi-ronmental advantages, but also some disadvantages can be expected. In addition, the significance of the manufac-turing process of the FC, more specifically the Polymer Electrolyte Membrane Fuel Cell (PEMFC) type, in terms of environmental impact is presented. Finally, CIEMAT’s role in HYCHAIN European project, consisting of supporting early adopters for hydrogen FCs in the transport sector, is展开更多
Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicr...Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicrobial,chemical durability,electrical insulation,and UV aging features.Due to their widely anticipation in petroleum,applications in building,conveyance,aerospace,electronics,automobiles and energy,these multi-functional coatings have a tremendous leverage in human life,all technological and scientific subjects.Numerous applications have been made for multilateral polymers like polyurethane(PU),epoxy(EP),polyaniline(PANI)conductive polymer,polypyrrole(PPy),and etc,on various metallic surfaces especially,carbon steel substrate owing to their excellent resistance properties.Practically,nanomaterials can possess potential in the all-interdisciplinary domains of materials science and engineering,chemical and physical sciences,biological and health sciences.As known,the designed polymer nanocomposite coating paradigm is fundamentally constituted from polymer or resin as a vehicle and inorganic nanofillers(nanoparticles and nanocomposites).Some commercialized and excessively employed nanocontainers in polymer nanocomposite coating formulations,like ZnO,TiO_(2),carbon nanotubes(CNTs),clay,SiO_(2),Al_(2)O_(3),graphene,GO,CeO_(2),ZrO_(2),FeTiO_(3),etc were discussed.The current review covered the chemistry and potential applications of the largest utilized multifunctional polymer nanocomposite coatings such as EP,PU and other considerable PNCCs.Lately,a titanic attention was made for epoxy nanocomposites because of their distinct physicochemical characteristics,which result from the combined qualities of the nanoparticles and polymer material unity.In addition,the author incorporated some of his scientific contributions in this area represented in construction of innovative functional polymer nanocomposites for a variety of uses with high economic,industrial impacts and future orientation.Furthermore,some newly published applications of polymer nanocomposite coatings were incorporated and discussed.展开更多
A new continuum theory of the constitutive equation of co-rotational derivative type is developed for anisotropic viscoelastic fluid—liquid crystalline (LC) polymers. A new concept of simple anisotropic fluid is intr...A new continuum theory of the constitutive equation of co-rotational derivative type is developed for anisotropic viscoelastic fluid—liquid crystalline (LC) polymers. A new concept of simple anisotropic fluid is introduced. On the basis of principles of anisotropic simple fluid, stress behaviour is described by velocity gradient tensor and spin tensor instead of the velocity gradient tensor in the classic Leslie—Ericksen continuum theory. Analyzing rheological nature of the fluid and using tensor analysis a general form of the constitutive equ- ation of co-rotational type is established for the fluid. A special term of high order in the equation is introduced by author to describe the sp- ecial change of the normal stress differences which is considered as a result of director tumbling by Larson et al. Analyzing the experimental results by Larson et al., a principle of Non- oscillatory normal stress is introduced which leads to simplification of the problem with relaxation times. The special behaviour of non- symmetry of the shear stress is predicted by using the present model for LC polymer liquids. Two shear stresses in shear flow of LC polymer liquids may lead to vortex and rotation flow, i.e. director tumbling in the flow. The first and second normal stress differences are calculated by the model special behaviour of which is in agree- ment with experiments. In the research, the com- putational symbolic manipulation such as computer software Maple is used. For the anisotropic viscoelastic fluid the constitutive equation theory is of important fundamental significance.展开更多
Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pr...Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.展开更多
A new continuum theory of the constitutive equation of co-rotational derivative type was developed by the author for anisotropic viscoelastic fluid-liquid crystalline (LC) polymers (S.F. Han, 2008, 2010) . This paper ...A new continuum theory of the constitutive equation of co-rotational derivative type was developed by the author for anisotropic viscoelastic fluid-liquid crystalline (LC) polymers (S.F. Han, 2008, 2010) . This paper is a continuation of the recent publication [1] to study extrusion-extensional flow of the fluid. A new concept of simple anisotropic fluid is introduced. On the basis of anisotropic simple fluid, stress behavior is described by velocity gradient tensor F and spin tensor W instead of the velocity gradient tensor D in the classic Leslie?Ericksen continuum theory. A special form of the constitutive equation of the co-rotational type is established for the fluid. Using the special form of the constitutive equation in components a computational analytical theory of the extrusion-extensional flow is developed for the LC polymer liquids - anisotropic viscoelastic fluid. Application of the constitutive theory to the flow is successful in predicting bifurcation of elongational viscosity and contraction of extrudate for LC polymer liquids–anisotropic viscoelastic fluid. The contraction of extrudate of LC polymer liquids may be associated with the stored elastic energy conversion into that necessary for bifurcation of elongational viscosity in extrusion extensional flow of the fluid.展开更多
Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, ...Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.展开更多
Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need fo...Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.展开更多
Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cat...Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.展开更多
Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited ...Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited by a distinguished Editorial Board headed by Professor Qi-Feng Zhou and supported by an International Advisory Board in which many famous active polymer scientists all over the world are included.展开更多
We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptiona...We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptional mechanical performance,including an ideal compressive strength of 343 GPa at a pressure of 300 GPa,~33% higher than that of diamond.This ultrahigh strength arises from the synergistic interplay between its three-dimensional covalent framework and hybridized bonding topology,which enables isotropic stress accommodation and dynamic electronic rearrangement.These results establish cage-N as a promising non-carbon ultrahard material and provide a bonding-driven route toward designing superhard frameworks under extreme conditions.展开更多
A couple of novel sulfobetaine copolymer is developed via Michael-type addition reaction. The comonomers, diamines and maleimide react via Michael reaction through UV irradiation using AIBN as photoinitiator producing...A couple of novel sulfobetaine copolymer is developed via Michael-type addition reaction. The comonomers, diamines and maleimide react via Michael reaction through UV irradiation using AIBN as photoinitiator producing polyamine chain. Further, sulfobetaine copolymers were obtained on treatment of the polyamine with sulfopropylating agent, 1,3-propane sultone. These novel sulfobetaine polymers were grafted on silica surface to produce responsive biocompatible surface. This easy straightforward, catalyst free facile protocol for synthesis of polymer grafted surface is useful for developing biomedical devices. Additionally, both the copolymers show fluorescence characteristics.展开更多
Since the commercialization of the fuel cell electric vehicles (FCEVs), the polymer electrolyte membrane fuel cell system has been actively improved as a powertrain for ultimate environment-friendly vehicle. During th...Since the commercialization of the fuel cell electric vehicles (FCEVs), the polymer electrolyte membrane fuel cell system has been actively improved as a powertrain for ultimate environment-friendly vehicle. During the FCEV operation, various transient conditions such as start-up/shut-down and fuel starvation occur irregularly, which deteriorates the durability of the membrane electrode assembly. In particular, when fuel starvation occurs, the carbon support in the anode is oxidized within few minutes, thus the mitigation of this phenomenon is essential for securing the durability. This short review introduces the concept of reversal tolerant anode (RTA), which is a mitigation method using an oxygen evolution catalyst and reviews some previous reports. In addition, new approach for RTA suggested by authors recently, which is the replacement of Pt anode catalyst by multifunctional IrRu alloy catalyst that simultaneously exhibits the activities for the hydrogen oxidation reaction and the oxygen evolution reaction is introduced.展开更多
Solid polymer electrolytes (SPEs) of polyacrylamide-co-acrylic acid (PAA) as the polymer host and zinc acetate (ZnA) as an ionic dopant were prepared using a single solvent by the solution casting technique. The amorp...Solid polymer electrolytes (SPEs) of polyacrylamide-co-acrylic acid (PAA) as the polymer host and zinc acetate (ZnA) as an ionic dopant were prepared using a single solvent by the solution casting technique. The amorphous and crystalline structures of film were investigated by X-ray diffraction (XRD). The surface morphology of samples was examined by scanning electron microscopy (SEM). The composition and complex formation of films were characterized by Fourier transform infrared (FTIR) spectroscopy. The conductivity of the PAA-ZnA films was determined by electrochemical impedance spectroscopy. According to the XRD and FTIR analyses, all electrolyte films were in amorphous state and the existence of interaction between Zn2+ cations and the PAA structure confirms that the film was successfully prepared. The SEM observations reveal that the electrolyte films appeared to be rough and flat with irregularly shaped surfaces. The highest ionic conductivity (σ) of 1.82 × 10-5 Scm-1 was achieved at room temperature (303 K) for the sample containing 10 wt % ZnA.展开更多
Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)...Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.展开更多
To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polym...To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.展开更多
Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford prod...Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.展开更多
Building and construction sector, including infrastructures, are facing many challenges which are scarcity of raw materials, CO2 emissions, lower construction efficiency, and deterioration under corrosive environment ...Building and construction sector, including infrastructures, are facing many challenges which are scarcity of raw materials, CO2 emissions, lower construction efficiency, and deterioration under corrosive environment that cost the world economy $2.5 trillion and this translates to 3.4% of world gross domestic product. This paper presents several examples that show how the use of the nonmetallic materials improved sustainability and life cycles in the built environment by removing the corrosion issue from its root and using durable NM polymers in construction. The paper details recently patented Aramco technology for the use of nonmetallic paving panels that could be used as an alternative to concrete and asphalt paving. Other case studies presented cover use of GFRP Poles for traffic signs and signal poles to replace traditional steel poles. Details of developments for specialist structural application in bridges, in architectural applications, polymers in soils, fibers in pavement manholes and bendable concrete are presented.展开更多
Low methanol permeability of proton exchange membranes (PEMs) is greatly important for direct methanol fuel cells (DMFCs). Here, sulfonated poly (ether ether ketone) (SPEEK) based semiinterpenetrating polymer networks...Low methanol permeability of proton exchange membranes (PEMs) is greatly important for direct methanol fuel cells (DMFCs). Here, sulfonated poly (ether ether ketone) (SPEEK) based semiinterpenetrating polymer networks (semi-IPNs) are successfully prepared by interpenetrating SPEEK into the in-situ synthesized crosslinking networks. The polymeric networks are formed by the covalent bonds between bromobenzyl groups of bro mo methylated poly (phenylene oxide) and amine groups of diamine linkers as well as the ionic bonds between amine species and sulfonated groups. Two linkers without and with sulfonated groups are applied to fabricate the semi-IPNs. The core properties of the membranes, like phase separation, water uptake, proton conductivity and methanol permeability, are systematically studied and compared. The DMFCs assembled by using the semi-IPN membranes display better performance than Nafion 117 in high concentration methanol solutions. The present work provides a facile way to prepare PEMs with enhanced DMFC performance.展开更多
The objective of this paper is to model the size-dependent thermo-mechanical behaviors of a shape memory polymer (SMP) microbeam.Size-dependent constitutive equations,which can capture the size effect of the SMP,are p...The objective of this paper is to model the size-dependent thermo-mechanical behaviors of a shape memory polymer (SMP) microbeam.Size-dependent constitutive equations,which can capture the size effect of the SMP,are proposed based on the modified couple stress theory (MCST).The deformation energy expression of the SMP microbeam is obtained by employing the proposed size-dependent constitutive equation and Bernoulli-Euler beam theory.An SMP microbeam model,which includes the formulations of deflection,strain,curvature,stress and couple stress,is developed by using the principle of minimum potential energy and the separation of variables together.The sizedependent thermo-mechanical and shape memory behaviors of the SMP microbeam and the influence of the Poisson ratio are numerically investigated according to the developed SMP microbeam model.Results show that the size effects of the SMP microbeam are significant when the dimensionless height is small enough.However,they are too slight to be necessarily considered when the dimensionless height is large enough.The bending flexibility and stress level of the SMP microbeam rise with the increasing dimensionless height,while the couple stress level declines with the increasing dimensionless height.The larger the dimensionless height is,the more obvious the viscous property and shape memory effect of the SMP microbeam are.The Poisson ratio has obvious influence on the size-dependent behaviors of the SMP microbeam.The paper provides a theoretical basis and a quantitatively analyzing tool for the design and analysis of SMP micro-structures in the field of biological medicine,microelectronic devices and micro-electro-mechanical system (MEMS) self-assembling.展开更多
Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effectiv...Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.展开更多
文摘This study presents a state of the art of several studies dealing with the environmental impact assessment of fuel cell (FC) vehicles and the comparison with their conventional fossil-fuelled counterparts, by means of the Life Cycle As-sessment (LCA) methodology. Results declare that, depending on the systems characteristics, there are numerous envi-ronmental advantages, but also some disadvantages can be expected. In addition, the significance of the manufac-turing process of the FC, more specifically the Polymer Electrolyte Membrane Fuel Cell (PEMFC) type, in terms of environmental impact is presented. Finally, CIEMAT’s role in HYCHAIN European project, consisting of supporting early adopters for hydrogen FCs in the transport sector, is
文摘Polymer nanocomposite coatings(PNCCs)are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard,mechanical resistance,antimicrobial,chemical durability,electrical insulation,and UV aging features.Due to their widely anticipation in petroleum,applications in building,conveyance,aerospace,electronics,automobiles and energy,these multi-functional coatings have a tremendous leverage in human life,all technological and scientific subjects.Numerous applications have been made for multilateral polymers like polyurethane(PU),epoxy(EP),polyaniline(PANI)conductive polymer,polypyrrole(PPy),and etc,on various metallic surfaces especially,carbon steel substrate owing to their excellent resistance properties.Practically,nanomaterials can possess potential in the all-interdisciplinary domains of materials science and engineering,chemical and physical sciences,biological and health sciences.As known,the designed polymer nanocomposite coating paradigm is fundamentally constituted from polymer or resin as a vehicle and inorganic nanofillers(nanoparticles and nanocomposites).Some commercialized and excessively employed nanocontainers in polymer nanocomposite coating formulations,like ZnO,TiO_(2),carbon nanotubes(CNTs),clay,SiO_(2),Al_(2)O_(3),graphene,GO,CeO_(2),ZrO_(2),FeTiO_(3),etc were discussed.The current review covered the chemistry and potential applications of the largest utilized multifunctional polymer nanocomposite coatings such as EP,PU and other considerable PNCCs.Lately,a titanic attention was made for epoxy nanocomposites because of their distinct physicochemical characteristics,which result from the combined qualities of the nanoparticles and polymer material unity.In addition,the author incorporated some of his scientific contributions in this area represented in construction of innovative functional polymer nanocomposites for a variety of uses with high economic,industrial impacts and future orientation.Furthermore,some newly published applications of polymer nanocomposite coatings were incorporated and discussed.
文摘A new continuum theory of the constitutive equation of co-rotational derivative type is developed for anisotropic viscoelastic fluid—liquid crystalline (LC) polymers. A new concept of simple anisotropic fluid is introduced. On the basis of principles of anisotropic simple fluid, stress behaviour is described by velocity gradient tensor and spin tensor instead of the velocity gradient tensor in the classic Leslie—Ericksen continuum theory. Analyzing rheological nature of the fluid and using tensor analysis a general form of the constitutive equ- ation of co-rotational type is established for the fluid. A special term of high order in the equation is introduced by author to describe the sp- ecial change of the normal stress differences which is considered as a result of director tumbling by Larson et al. Analyzing the experimental results by Larson et al., a principle of Non- oscillatory normal stress is introduced which leads to simplification of the problem with relaxation times. The special behaviour of non- symmetry of the shear stress is predicted by using the present model for LC polymer liquids. Two shear stresses in shear flow of LC polymer liquids may lead to vortex and rotation flow, i.e. director tumbling in the flow. The first and second normal stress differences are calculated by the model special behaviour of which is in agree- ment with experiments. In the research, the com- putational symbolic manipulation such as computer software Maple is used. For the anisotropic viscoelastic fluid the constitutive equation theory is of important fundamental significance.
基金Project(50574061) supported by the National Natural Science Foundation of China
文摘Low-permeability dense reservoirs,including micro-fractured reservoirs,are commonly characterized by high content of clay substances,high original water saturation,high sensitivity to invasive fluids,high capillary pressure,complicated structure and anisotropic,high flow-resistance and micro pore throats etc,.Generally they also have lots of natural micro fractures,probably leading to stress sensibility.Main damaging factors in such reservoirs are water-sensibility and water-blocking caused by invasive fluids during drilling and production operations.Once damaged,formation permeability can rarely recovered.Numerous studies have shown that damaging extent of water-blocking ranges from 70% to 90%.Main damaging mechanisms and influencing factors of water-blocking were systematically analyzed.Also some feasible precaution or treating approaches of water-blocking were put forward.In a laboratory setting,a new multi-functional drilling fluid composed mainly of amphion polymer,sulfonation polymer,high effectively preventive water-blocking surfactants,ideal packing temporary bridging agents(TBA) and film-forming agents,etc.,were developed.New low-damage drilling fluids has many advantages,such as good rheological properties,excellent effectiveness of water-blocking prevention,good temporary plugging effect,low filtration and ultra-low permeability(API filtration≤5 mL,HTHP filtration≤10 mL,mud cake frictional coefficient≤0.14,permeability recovery>81%),can efficiently prevent or minimize damage,preserve natural formation and enhance comprehensive development-investment effect in TUHA Jurassic dense sandstone reservoir formation with low-permeability,the only one developing integrated condense gas field.Some references can be provided to similar reservoir formations.
文摘A new continuum theory of the constitutive equation of co-rotational derivative type was developed by the author for anisotropic viscoelastic fluid-liquid crystalline (LC) polymers (S.F. Han, 2008, 2010) . This paper is a continuation of the recent publication [1] to study extrusion-extensional flow of the fluid. A new concept of simple anisotropic fluid is introduced. On the basis of anisotropic simple fluid, stress behavior is described by velocity gradient tensor F and spin tensor W instead of the velocity gradient tensor D in the classic Leslie?Ericksen continuum theory. A special form of the constitutive equation of the co-rotational type is established for the fluid. Using the special form of the constitutive equation in components a computational analytical theory of the extrusion-extensional flow is developed for the LC polymer liquids - anisotropic viscoelastic fluid. Application of the constitutive theory to the flow is successful in predicting bifurcation of elongational viscosity and contraction of extrudate for LC polymer liquids–anisotropic viscoelastic fluid. The contraction of extrudate of LC polymer liquids may be associated with the stored elastic energy conversion into that necessary for bifurcation of elongational viscosity in extrusion extensional flow of the fluid.
文摘Fluoroalkyl end-capped vinyltrimethoxysilane oligomer [RF-(CH2CHSi(OMe)3)n-RF;RF = CF(CF3)OCF7, n = 2, 3;RF-(VM)n-RF] was applied to the preparation of fluoroalkyl end-capped vinyltrimethoxysilane oligomer/α-, β-, γ-cyclodextrin polymers (α-, β-, γ-CDPs) composites [RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs] by the sol-gel reaction of the corresponding oligomer in the presence of the α-, β-, γ-CDPs under alkaline conditions. The RF-(VM-SiO2)n-RF/α-, β-, γ-CDPs composites thus obtained were found to give a good dispersibility toward the traditional organic media except for water, and were applied to the surface modification of glass to provide a sueperoleophilic/superhydrophobic characteristic on the modified surface, although the corresponding RF-(VM-SiO2)n-RF nanocomposites can give a usual oleophobic/superhydrophobic property on the surface. These composites powders were also found to be applicable to the packing material for the column chromatography to separate the mixture of oil/water and the water in oil (W/O) emulsions. More interestingly, these composite powders were found to have a higher adsorption ability toward not only low-molecular weight aromatic compounds such as bisphenol A and bisphenol AF but also volatile organic compounds, compared to that of the pristine α-, β-, γ-CDPs.
基金supported by the National Natural Science Foundation of China(Nos.22322107,22101169 and 22071144)by Shanghai Scientific and Technological Committee(No.22010500300).
文摘Organic pollutants,a pivotal factor in water pollution,have persistently menaced the aquatic ecosystem,as well as the sustainable development of human health,economy,and society.Consequently,there is an urgent need for advanced techniques to efficiently eliminate organic micropollutants from water.Here,we present the synthesis of three nonporous cavitand-crosslinked polymers capable of adsorbing diverse organic pollutants from aqueous solutions.These polymeric adsorbents exhibit outstanding adsorptive performance towards the tested micropollutants,characterized by high apparent adsorption rate constants(kobs)and maximum adsorption capacities(qmax,e).Notably,Compound NCCP-1 demonstrated a remarkable qmax,e of 459 mg/g for bisphenol A(BPA),ranking among the highest values reported for organic polymer adsorbents.In-depth investigation of the adsorption mechanism of the nonporous polymer revealed that it involves the recognition of pollutants by the deep cavities of the cavitand moieties and the interstitial spaces between them,primarily mediated by the hydrophobic effect.Furthermore,NCCP-1 was applied in situ water purification simulations and was proven to maintain its removal efficiency over more than four cycles,highlighting its potential for practical applications in water treatment.
基金financially supported by the Russian Science Foundation(No.23-13-00205)。
文摘Star-shaped six-arm polymers with hexaaza[2_(6)]orthoparacyclophane core and arms of block copolymers of poly-2-ethyl-5,6-dihydrooxazine with poly-2-isopropyl-5,6-dihydrooxazine were synthesized successfully using cationic ring-opening polymerization.The ratio of blocks,the order of their attachment to the core,and arm length were varied.Conformation of synthesized stars was determined by methods of molecular hydrodynamics and optics.It has been shown that star-shaped molecules were characterized by high intramolecular density,and the arm folding increased with their lengthening.The influence of the structure of block copolymers and their molar mass on the critical micelle concentration has been established.Complexes of synthesized star-shaped block copolymers with curcumin were obtained and the efficient binding of curcumin to polymer molecules was demonstrated.The behavior of the aqueous solutions of the prepared polymer stars and their complexes with curcumin was investigated by light scattering and turbidimetry methods.The influence of the structure and molar mass of star polymers on their thermoresponsiveness and the phase separation temperatures in aqueous solutions was analyzed.A slight increase in the phase separation temperature was found on passage from polymer solutions to solutions of polymer complexes with hydrophobic curcumin.
文摘Aims and Scope Chinese Journal of Polymer Science(CJPS)is a monthly journal published in English and sponsored by the Chinese Chemical Society and the Institute of Chemistry,Chinese Academy of Sciences.CJPS is edited by a distinguished Editorial Board headed by Professor Qi-Feng Zhou and supported by an International Advisory Board in which many famous active polymer scientists all over the world are included.
基金supported by the Natural Science Foundation of China(Grant Nos.T2325013,52288102,52090024,12034009,12474004,and 12304036)the National Key R&D Program of China Grant No.2023YFA1610000+1 种基金the Fundamental Research Funds for the Central Universitiesthe Program for Jilin University and Sun Yat-sen University.
文摘We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptional mechanical performance,including an ideal compressive strength of 343 GPa at a pressure of 300 GPa,~33% higher than that of diamond.This ultrahigh strength arises from the synergistic interplay between its three-dimensional covalent framework and hybridized bonding topology,which enables isotropic stress accommodation and dynamic electronic rearrangement.These results establish cage-N as a promising non-carbon ultrahard material and provide a bonding-driven route toward designing superhard frameworks under extreme conditions.
文摘A couple of novel sulfobetaine copolymer is developed via Michael-type addition reaction. The comonomers, diamines and maleimide react via Michael reaction through UV irradiation using AIBN as photoinitiator producing polyamine chain. Further, sulfobetaine copolymers were obtained on treatment of the polyamine with sulfopropylating agent, 1,3-propane sultone. These novel sulfobetaine polymers were grafted on silica surface to produce responsive biocompatible surface. This easy straightforward, catalyst free facile protocol for synthesis of polymer grafted surface is useful for developing biomedical devices. Additionally, both the copolymers show fluorescence characteristics.
基金supported by Hyundai Mobis(No. G106280)the Gwangju Institute of Science and Technology in 2019
文摘Since the commercialization of the fuel cell electric vehicles (FCEVs), the polymer electrolyte membrane fuel cell system has been actively improved as a powertrain for ultimate environment-friendly vehicle. During the FCEV operation, various transient conditions such as start-up/shut-down and fuel starvation occur irregularly, which deteriorates the durability of the membrane electrode assembly. In particular, when fuel starvation occurs, the carbon support in the anode is oxidized within few minutes, thus the mitigation of this phenomenon is essential for securing the durability. This short review introduces the concept of reversal tolerant anode (RTA), which is a mitigation method using an oxygen evolution catalyst and reviews some previous reports. In addition, new approach for RTA suggested by authors recently, which is the replacement of Pt anode catalyst by multifunctional IrRu alloy catalyst that simultaneously exhibits the activities for the hydrogen oxidation reaction and the oxygen evolution reaction is introduced.
文摘Solid polymer electrolytes (SPEs) of polyacrylamide-co-acrylic acid (PAA) as the polymer host and zinc acetate (ZnA) as an ionic dopant were prepared using a single solvent by the solution casting technique. The amorphous and crystalline structures of film were investigated by X-ray diffraction (XRD). The surface morphology of samples was examined by scanning electron microscopy (SEM). The composition and complex formation of films were characterized by Fourier transform infrared (FTIR) spectroscopy. The conductivity of the PAA-ZnA films was determined by electrochemical impedance spectroscopy. According to the XRD and FTIR analyses, all electrolyte films were in amorphous state and the existence of interaction between Zn2+ cations and the PAA structure confirms that the film was successfully prepared. The SEM observations reveal that the electrolyte films appeared to be rough and flat with irregularly shaped surfaces. The highest ionic conductivity (σ) of 1.82 × 10-5 Scm-1 was achieved at room temperature (303 K) for the sample containing 10 wt % ZnA.
基金supported by the National Natural Science Foundation of China(Grant Nos.52478351,52208329)the Shenzhen Science and Technology Innovation Commission(Grant No.JCYJ20240813143306009)support is gratefully acknowledged.
文摘Polymer-modified bentonite(PMB)is much more effective at containing chemically aggressive liquids than conventional bentonite.The PMB manufacturing process typically utilizes natural,high-quality sodium bentonite(NaB)owing to its excellent hydrophilicity and swelling capacity.However,calcium bentonite(CaB),which is much more abundant worldwide,is rarely used for containment applications owing to its poor hydrophilicity.This study proposed a polymerization method that transforms sodium-activated calcium bentonite(NCB)into PMB to achieve low hydraulic conductivity(k)to aggressive liquids.The mechanism for its low k was revealed through characterization techniques and analyses(e.g.X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy(SEM),and Brunauer-Emmett-Teller(BET)).The results showed that the PMB had a small amount of polymer elution(indicating better interface stability)and thus exhibited excellent barrier properties under chemically aggressive conditions,with the k of<10^(-11) m/s for 0.6 mol/L NaCl solution,which is four orders of magnitude lower than that of the NCB(k=3×10^(-7) m/s).Various microscopic analyses indicated that the selected monomers were successfully polymerized,and intercalated into and grafted onto the montmorillonite layers of bentonite.The formed polymer network increased the swelling capability of PMB granules,decreased the pore size,and created narrow and tortuous flow pathways leading to a very low k to aggressive liquids.
基金the support from the Jiangsu Provincial Senior Talent Program (Dengfeng,Jiangsu University)the support from the National Key R&D Program of China (No.2024YFB3612600)+3 种基金the National Natural Science Foundation of China (Nos.22275098,62288102)Basic Research Program of Jiangsu (No.BK20243057)the Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications (No.NY222097)the National Natural Science Foundation of China (No.62205035)。
文摘To precisely control intrachain π-electron delocalization and interchain interaction simultaneously is the prerequisite to obtain stable and efficient deep-blue light-emitting p-n polymer semiconductors for the polymer light-emitting diodes(PLEDs).Herein,we introduced the steric carbazole-fluorene nanogrid into light-emitting diphenyl sulfone-based p-n polymer semiconductors(PG and PDG) via metal-free C-N coupling polymerization for the fabrication of deep-blue PLEDs.The steric,rigid and twisted configuration between nanogrid and diphenyl sulfone in PG and PDG present the unique characteristic of large steric hindrance interaction to suppress interchain aggregation in solid state.Due to the different length of electron-deficient diphenyl sulfone monomers,PG showed a deep-blue emission with a maximum peak at 428 nm but red-shifted to 480 nm for the PDG films.Interestingly,similar deep-blue emission behavior of PG in diluted non-polar solution and films suggested the extremely weak interchain aggregation.Finally,PLEDs based on PG are fabricated with a stable deep-blue emission of CIE(0.15,0.10),and corresponding EL spectral profile is also completely identical to PL ones of diluted solution,revealed the intrachain emission without obvious interchain excited state,confirmed effectiveness of the steric hindrance functionalization of nanogrid in p-n polymer semiconductor for deep-blue light-emitting organic optoelectronics.
基金financially supported by National Key R&D Program Young Scientists Project(No.2023YFC3903100)the National Natural Science Foundation of China(No.22322503)analytical and testing assistance from the Analysis and Testing Center of HUST。
文摘Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_(2) ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.
文摘Building and construction sector, including infrastructures, are facing many challenges which are scarcity of raw materials, CO2 emissions, lower construction efficiency, and deterioration under corrosive environment that cost the world economy $2.5 trillion and this translates to 3.4% of world gross domestic product. This paper presents several examples that show how the use of the nonmetallic materials improved sustainability and life cycles in the built environment by removing the corrosion issue from its root and using durable NM polymers in construction. The paper details recently patented Aramco technology for the use of nonmetallic paving panels that could be used as an alternative to concrete and asphalt paving. Other case studies presented cover use of GFRP Poles for traffic signs and signal poles to replace traditional steel poles. Details of developments for specialist structural application in bridges, in architectural applications, polymers in soils, fibers in pavement manholes and bendable concrete are presented.
基金support of the National Natural Science Foundation of China(Nos. 21603197, 21703212,21233006 and 21473164)Natural Science Foundation of Hubei Province of China(No.2016CFB181)+1 种基金Fundamental Research Funds for the Central University, China University of Geosciences (Wuhan)(No. CUGL180403)China University of Geosciences (Wuhan) for the program of Center for Advanced Energy Research and Technologies
文摘Low methanol permeability of proton exchange membranes (PEMs) is greatly important for direct methanol fuel cells (DMFCs). Here, sulfonated poly (ether ether ketone) (SPEEK) based semiinterpenetrating polymer networks (semi-IPNs) are successfully prepared by interpenetrating SPEEK into the in-situ synthesized crosslinking networks. The polymeric networks are formed by the covalent bonds between bromobenzyl groups of bro mo methylated poly (phenylene oxide) and amine groups of diamine linkers as well as the ionic bonds between amine species and sulfonated groups. Two linkers without and with sulfonated groups are applied to fabricate the semi-IPNs. The core properties of the membranes, like phase separation, water uptake, proton conductivity and methanol permeability, are systematically studied and compared. The DMFCs assembled by using the semi-IPN membranes display better performance than Nafion 117 in high concentration methanol solutions. The present work provides a facile way to prepare PEMs with enhanced DMFC performance.
基金Project supported by the National Key Research and Development Program of China(No.2017YFC0307604)the Talent Foundation of China University of Petroleum(No.Y1215042)the Graduate Innovation Program of China University of Petroleum(East China)(No.YCX2019084)
文摘The objective of this paper is to model the size-dependent thermo-mechanical behaviors of a shape memory polymer (SMP) microbeam.Size-dependent constitutive equations,which can capture the size effect of the SMP,are proposed based on the modified couple stress theory (MCST).The deformation energy expression of the SMP microbeam is obtained by employing the proposed size-dependent constitutive equation and Bernoulli-Euler beam theory.An SMP microbeam model,which includes the formulations of deflection,strain,curvature,stress and couple stress,is developed by using the principle of minimum potential energy and the separation of variables together.The sizedependent thermo-mechanical and shape memory behaviors of the SMP microbeam and the influence of the Poisson ratio are numerically investigated according to the developed SMP microbeam model.Results show that the size effects of the SMP microbeam are significant when the dimensionless height is small enough.However,they are too slight to be necessarily considered when the dimensionless height is large enough.The bending flexibility and stress level of the SMP microbeam rise with the increasing dimensionless height,while the couple stress level declines with the increasing dimensionless height.The larger the dimensionless height is,the more obvious the viscous property and shape memory effect of the SMP microbeam are.The Poisson ratio has obvious influence on the size-dependent behaviors of the SMP microbeam.The paper provides a theoretical basis and a quantitatively analyzing tool for the design and analysis of SMP micro-structures in the field of biological medicine,microelectronic devices and micro-electro-mechanical system (MEMS) self-assembling.
基金financially supported by the National Natural Science Foundation of China(No.52473338)the National Natural Science Foundation of China(Nos.52173004 and 51873055)+3 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA0540000)Advanced Materials-National Science and Technology Major Project(No.2025ZD0614000)Hebei Natural Science Foundation(No.E2022202015)Anhui Province Science and Technology Innovation Tackling Key Project(No.202423i08050025)。
文摘Heterogeneous polymerization represents a widely employed method in the polyolefin industry.In recent years,various heterogenization strategies for late transition metal catalysts have been developed,enabling effective control of polymer morphology and optimization of catalytic performance.However,while most studies have focused on designing anchoring groups and advancing support approaches,systematic investigations into how the support influences the catalytic behavior of the late transition metal catalysts.In this work,we fabricated supported α-diimine nickel catalysts by functionalizing the ligand with alkyl alcohol chains of varying lengths and supporting them onto MgCl_(2)supports.The ethylene polymerization behavior of these catalysts was then investigated.By precisely adjusting the alkyl alcohol chain length,the distance between the catalytically active metal center and the support surface was modulated.This approach demonstrates that support-induced steric hindrance effect can be effectively regulated by controlling the separation distance between the metal center and the support surface.
