Efficient polymer supported synthesis of multi-substituted pyrimidine-4-one derivatives was described. Target products were produced from fluorenylmethoxycarbonyl（Fmoc） protected β-amino acid loaded on hydro- xymet...Efficient polymer supported synthesis of multi-substituted pyrimidine-4-one derivatives was described. Target products were produced from fluorenylmethoxycarbonyl（Fmoc） protected β-amino acid loaded on hydro- xymethyl resin through deprotection, N-alkylation, guanidine formation, and cleavage of 2,2,4,6,7-pentamethyl dihy-drobenzofuran-sulfonyl（Pbf） by trifluoracetic acid（TFA） followed with cyclization. The procedure has the advantages of easy operation, mild reaction conditions, and forming multiple substituents.展开更多
A new chelating polymer support has been prepared by suspension copolymerization of synthesized N,N'-bis(3- allyl salicylidene)ethylenediamine monomer Schiff base (N,N'-BSEDA) with styrene (St) and divinylbenz...A new chelating polymer support has been prepared by suspension copolymerization of synthesized N,N'-bis(3- allyl salicylidene)ethylenediamine monomer Schiff base (N,N'-BSEDA) with styrene (St) and divinylbenzene (DVB) using azobisisobutyronitrile (AIBN) as initiator in the presence of poly(vinyl alcohol). The content and complexation ability of monomer Schiff base (N,N'-BSEDA) for cobalt ions in prepared crosslinked polymer beads have shown dependence on the amount of DVB used in reaction mixture. The amount of monomer Schiff base (N,N '-BSEDA) in crosslinked beads showed a substantial decreasing trend at high concentration of DVB in the reaction mixture (> 1.5 mol dm-3), hence the efficiency of complexation (EC%) and cobalt ion loading (EL%) of polymer beads showed a decreasing trend. The structure of monomer Schiff base (N,N'-BSEDA) and its cobalt complex on polymer support was elucidated by IR, UV and magnetic measurements. The catalytic activity of polymer bound cobalt Schiff base complex was evaluated by analyzing kinetic data of decomposition of hydrogen peroxide in the presence of either supported cobalt complex or free cobalt complex. The activation energy for the decomposition of hydrogen peroxide by polymer supported cobalt complex was found to be low (33.37 kJ mol-1) in comparison with unsupported cobalt complex (56.35 kJ mol-1). On the basis of experimental observations, reaction steps are proposed and a suitable rate expression derived.展开更多
In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental res...In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.展开更多
D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impregnation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectroscopy (XPS). The Ni particles on the catalysts are ...D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impregnation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectroscopy (XPS). The Ni particles on the catalysts are very highly dispersed and display superparamagnetic behaviour. Ni-Cu alloy clusters were found to be formed. The surface compositions are different from the bulk concentrations. In contrast with the surface enrichment in copper generally observed on conventional Ni-Cu catalysts, the surfaces of these catalysts are enriched in nickel. The nickel is in both zero and valent states, while copper is mainly in metallic state. Catalytic data show that the formation of Ni-Cu alloy clusters has a profound effect on the catalytic activities of the catalysts in the hydrogenation of furfural. The activity of the Ni:Cu ratio of one bimetallic catalysts is much higher than that of the Ni or Cu monometallic catalyst.展开更多
Polymeric Grignard Reagent (PGR) based on the chloromethylated poly(ST-co-DVB) resinhas been prepared by means of anthracene-magnesium complex in THF (Anth-Mg-THF), andpolymer matrix with long polymethylene spacer was...Polymeric Grignard Reagent (PGR) based on the chloromethylated poly(ST-co-DVB) resinhas been prepared by means of anthracene-magnesium complex in THF (Anth-Mg-THF), andpolymer matrix with long polymethylene spacer was synthesized via the coupling reaction betweenPGR and α, ω-dibromoalkanes. Based on the studies of factors affecting the coupling, such ascatalyst,reaction time,the length of spacer etc.,this paper offers the optimal reaction conditionsand three typical experiment procedures. The mechanism for the formation and coupling reactionof PGR are also discussed.展开更多
Various pretreatments of poly (N-vinyl-2-pyrrolidone) (PVP) protected palladium-cobalt system result in different catalytic activities in the hydrodechlorination of chlorobenzene.
The optical alpha-amino acids were synthesized under room temperature by alkylation of N-(diphenyl methylene) glycine t-butyl ester under polymer-supported phase transfer conditions using polymer-supported cinchonine ...The optical alpha-amino acids were synthesized under room temperature by alkylation of N-(diphenyl methylene) glycine t-butyl ester under polymer-supported phase transfer conditions using polymer-supported cinchonine (or quinine) alkaloids as chiral phase transfer catalysts and dichloromethane as solvent, followed by hydrolysis of the above intermediates introduced to the final products-optical alpha-amino acids. This is a new method for the asymmetric synthesis of alpha-amino acids. The influences of catalyst, temperature, substrates, and organic solvents on the chemical yield and optical purities of products were studied.展开更多
The polymer-supported cluster FeCo3 (CO)_(12) (μ3-AuPph_2 CH_2) (4) has been synthesized through reaction of CH_2 ph_2 PAuCl with the cluster anion FeCo_3 (CO)_(12)^-. They are characterized through IR spectra, elect...The polymer-supported cluster FeCo3 (CO)_(12) (μ3-AuPph_2 CH_2) (4) has been synthesized through reaction of CH_2 ph_2 PAuCl with the cluster anion FeCo_3 (CO)_(12)^-. They are characterized through IR spectra, electronic spectra and XPS, with homogenous analog FeCo_3 (CO)_(12) (μ3-AuPph_3) (3) as reference compound. The cluster (3) and the polymer-supported cluster (4) are good catalysts for hydroformylation of olefins. They have better activity and selectivity than the cluster (1) and (2).The supported cluster (4) is more stable and has catalytic activity at higher temperature than its homogeneous analog (3). From the metal core level binding energies in XPS and λ_(max) in electronic spectra, it is found that the metal-metal bonds in (4) are reinforced bypolymer supporter. The cluster (3) and (4) can be reused , and possibly do not fragment to one metal species in the course of catalytic reaction.展开更多
Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst....Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst. The number of active centers([C*]/[Ti])was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and measuring sulfur content in the polymer. The pre-contact treatment caused selective deactivation of a part of active centers with low stereoselectivity and much lower activity in the initial stage of polymerization as compared with the polymerization run without the pre-contact stage. The active center concentration and polymerization activity decreased with prolonging of the pre-contact stage. The proportion of stereoselective active centers was increased by prolonging the pre-contact stage, so the isotacticity of produced polypropylene was enhanced. Release of active centers through catalyst particle fragmentation was significantly retarded, and the polymerization rate curve changed from decay type to induction type by the precontact treatment. In the induction period both non-stereoselective and stereoselective active centers were released and activated, resulting in gradual reduction of the polymer’s isotacticity in the first 5-10 min of polymerization. Selective deactivation of non-stereoselective active centers also took place in propylene polymerization using the catalyst without pre-contacting with the cocatalyst. In this case, the polymerization rate decayed with time after a short induction period of 2-5 min. Over reduction of the active center precursors with low stereoselectivity by triethylaluminum was considered as the reason for their deactivation during the pre-contact or the polymerization processes.展开更多
A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of ...A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of CuCl2/ Me6TREN was added, the controllability of the polymerization over the iron-mediated catalyst was significantly improved（Mw/Mn = 1.23-1.73 ）, affording a polymer with a low residual metal via a simple catalyst separation procedure. After suitable regeneration, the supported iron catalyst could also he recycled. UV-Vis analysis showed that the additional copper catalyst could facilitate the radical deactivation process.展开更多
A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecula...A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.展开更多
Ethylene polymerization was carried out by immobilization of rac-ethylenebis（1-indenyl）zirconium dichloride （Et（Ind）2ZrCl2） and rac-dimethylsilylbis（1-indenyl）zirconium dichloride （Me2Si（Ind）2ZrCl2） preact...Ethylene polymerization was carried out by immobilization of rac-ethylenebis（1-indenyl）zirconium dichloride （Et（Ind）2ZrCl2） and rac-dimethylsilylbis（1-indenyl）zirconium dichloride （Me2Si（Ind）2ZrCl2） preactivated with methylaluminoxane （MAO） on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me2Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 ~C and 70 ~C for Me2Si（Ind）2ZrC1JMAO and Et（Ind）zZrCI2/MAO catalysts systems, respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 ℃ for both catalysts systems. The melting points of the produced polyethylene were about 130 ℃, which could be attributed to the linear structure of HDPE.展开更多
A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found th...A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.展开更多
Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for C...Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.展开更多
Nanosized fibrous cerium（IV） hydrogen phosphate membrane, Ce（HPO4）2·2.9H20 （nCePf）, was prepared and characterized by chemical, XRD （X-ray diffraction）, TGA （thermogravimetric analysis）, SEM （scanning ...Nanosized fibrous cerium（IV） hydrogen phosphate membrane, Ce（HPO4）2·2.9H20 （nCePf）, was prepared and characterized by chemical, XRD （X-ray diffraction）, TGA （thermogravimetric analysis）, SEM （scanning electron microscopy） and TEM （transmission electron microscopy）. Novel supported nanofibrous Ce（IV） phosphate/polyiondole nanocomposite membranes were prepared via in-situ chemical oxidation of the monomer that was promoted by the reduction of Ce（IV） ions present in the inorganic matrix. The presence of Ce（IV） ions allows redox reactions necessary to oxidative polymerization to occur. The resultant material was characterized by TGA, elemental （C, H, N） analysis and FT-IR （Fourier transform spectroscopy）. SEM images of the resulting nanocomposite reveals a uniform distribution of the polymer on the inorganic matrix. Amount of polyindole polymer present in the composite is found to be - 7.0%.展开更多
In the preparation of catalyst for propylene polymerization, the Mg(OEt) 2 support was activated with ethanol/CO 2 system followed by solidification, and treated with TiCl 4 in the presence of ethylbenzoate as an inte...In the preparation of catalyst for propylene polymerization, the Mg(OEt) 2 support was activated with ethanol/CO 2 system followed by solidification, and treated with TiCl 4 in the presence of ethylbenzoate as an internal donor(ID). The chemical compositions of the activated support and the prepared catalyst were examined in detail. During the dissolution of Mg(OEt) 2 support in ethanol medium with CO 2 bubbling, the structure of support changed to magnesium hydrocarbyl carbonate, (CH 3CH 2O) 2- x Mg(O (C O) OCH 2CH 3) x ( x = 1,2). The content of carbonated CO 2 in the activated support was dependent on the heat treatment in the solidification of support. In the preparation procedure of polymerization catalyst, the activated support was treated with TiCl 4 so that the structure of support was converted to MgCl 2 with the incorporation of ID. The polymerization behavior of the pre-pared catalyst was also studied in the presence of phenyltriethoxysilane as an external donor.展开更多
In this article, the effect of diethylaluminum chloride （DEAC） in propylene polymerization with MgC12-supported Ziegler-Natta catalyst was studied. Addition of DEAC in the catalyst system caused evident change in ca...In this article, the effect of diethylaluminum chloride （DEAC） in propylene polymerization with MgC12-supported Ziegler-Natta catalyst was studied. Addition of DEAC in the catalyst system caused evident change in catalytic activity and polymer chain structure. The activity decrease in raising DEAC/Ti molar ratio from 0 to 2 is a result of depressed production of isotactic polypropylene chains. The number of active centers in fractions of each polymer sample was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and fractionating the polymer into isotactic, medium- isotactic and atactic fractions. The number of active centers in isotactic fraction （[Ci＊]/[Ti]） was lowered by increasing DEAC/Ti molar ratio to 2, but further increasing the DEAC/Ti molar ratio to 20 caused marked increase of [Ci＊]/[Ti]. The number of active centers that produce atactic and medium-isotactic PP chains was less influenced by DEAC in the range of DEAC/Ti = 0-10, but increased when the DEAC/Ti molar ratio was further raised to 20. The propagation rate constant of Ci＊ （k^i） was evidently increased when DEAC/Ti molar ratio was raised from 0 to 5, but further increase in DEAC/Ti ratio caused gradual decrease in kpi. The complicated effect of DEAC on the polymerization kinetics, catalysis behaviors and polymer structure can be reasonably explained by adsorption of DEAC on the central metal of the active centers or on Mg atoms adjacent to the central metal展开更多
he polymers containing different ligand groups of atoms(mainly O,N,and S)and their rare earth complexes were prepared,characterized and classified based on the type of metal-ligand bonding. The catalytic activities of...he polymers containing different ligand groups of atoms(mainly O,N,and S)and their rare earth complexes were prepared,characterized and classified based on the type of metal-ligand bonding. The catalytic activities of the complexes are briefly discussed.The polymer- supported rare earth complexes shwed much greater activities than the correspond- ing complexes with a low molecular weight.展开更多
基金Supported by the Scientific Forefront and Interdisciplinary Innovation Project of Jilin UniversityChina(No.421031531412)+1 种基金the Jilin Provincial Research Foundation for Basic Research China(No.3D109K856604)
文摘Efficient polymer supported synthesis of multi-substituted pyrimidine-4-one derivatives was described. Target products were produced from fluorenylmethoxycarbonyl（Fmoc） protected β-amino acid loaded on hydro- xymethyl resin through deprotection, N-alkylation, guanidine formation, and cleavage of 2,2,4,6,7-pentamethyl dihy-drobenzofuran-sulfonyl（Pbf） by trifluoracetic acid（TFA） followed with cyclization. The procedure has the advantages of easy operation, mild reaction conditions, and forming multiple substituents.
文摘A new chelating polymer support has been prepared by suspension copolymerization of synthesized N,N'-bis(3- allyl salicylidene)ethylenediamine monomer Schiff base (N,N'-BSEDA) with styrene (St) and divinylbenzene (DVB) using azobisisobutyronitrile (AIBN) as initiator in the presence of poly(vinyl alcohol). The content and complexation ability of monomer Schiff base (N,N'-BSEDA) for cobalt ions in prepared crosslinked polymer beads have shown dependence on the amount of DVB used in reaction mixture. The amount of monomer Schiff base (N,N '-BSEDA) in crosslinked beads showed a substantial decreasing trend at high concentration of DVB in the reaction mixture (> 1.5 mol dm-3), hence the efficiency of complexation (EC%) and cobalt ion loading (EL%) of polymer beads showed a decreasing trend. The structure of monomer Schiff base (N,N'-BSEDA) and its cobalt complex on polymer support was elucidated by IR, UV and magnetic measurements. The catalytic activity of polymer bound cobalt Schiff base complex was evaluated by analyzing kinetic data of decomposition of hydrogen peroxide in the presence of either supported cobalt complex or free cobalt complex. The activation energy for the decomposition of hydrogen peroxide by polymer supported cobalt complex was found to be low (33.37 kJ mol-1) in comparison with unsupported cobalt complex (56.35 kJ mol-1). On the basis of experimental observations, reaction steps are proposed and a suitable rate expression derived.
基金The project was supported by the National Natural Science Foundation of China, "Macromolecular ligand effects of catalytic system for ring opening metathesis polymerization of dicydopentadiene" (Approval No. 29474160) & "Polymeric metal complex catalysts
文摘In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.
文摘D-72 resin supported nickel-copper catalysts prepared by solvated metal atom impregnation (SMAI) were studied by magnetic measurements and X-ray photoelectron spectroscopy (XPS). The Ni particles on the catalysts are very highly dispersed and display superparamagnetic behaviour. Ni-Cu alloy clusters were found to be formed. The surface compositions are different from the bulk concentrations. In contrast with the surface enrichment in copper generally observed on conventional Ni-Cu catalysts, the surfaces of these catalysts are enriched in nickel. The nickel is in both zero and valent states, while copper is mainly in metallic state. Catalytic data show that the formation of Ni-Cu alloy clusters has a profound effect on the catalytic activities of the catalysts in the hydrogenation of furfural. The activity of the Ni:Cu ratio of one bimetallic catalysts is much higher than that of the Ni or Cu monometallic catalyst.
文摘Polymeric Grignard Reagent (PGR) based on the chloromethylated poly(ST-co-DVB) resinhas been prepared by means of anthracene-magnesium complex in THF (Anth-Mg-THF), andpolymer matrix with long polymethylene spacer was synthesized via the coupling reaction betweenPGR and α, ω-dibromoalkanes. Based on the studies of factors affecting the coupling, such ascatalyst,reaction time,the length of spacer etc.,this paper offers the optimal reaction conditionsand three typical experiment procedures. The mechanism for the formation and coupling reactionof PGR are also discussed.
文摘Various pretreatments of poly (N-vinyl-2-pyrrolidone) (PVP) protected palladium-cobalt system result in different catalytic activities in the hydrodechlorination of chlorobenzene.
基金Project supported by State Education Committee Initial Research Crams for Return Scholar and supported by NSFC No 29774012.
文摘The optical alpha-amino acids were synthesized under room temperature by alkylation of N-(diphenyl methylene) glycine t-butyl ester under polymer-supported phase transfer conditions using polymer-supported cinchonine (or quinine) alkaloids as chiral phase transfer catalysts and dichloromethane as solvent, followed by hydrolysis of the above intermediates introduced to the final products-optical alpha-amino acids. This is a new method for the asymmetric synthesis of alpha-amino acids. The influences of catalyst, temperature, substrates, and organic solvents on the chemical yield and optical purities of products were studied.
基金The project is supported by National Natural Science Foundation of China
文摘The polymer-supported cluster FeCo3 (CO)_(12) (μ3-AuPph_2 CH_2) (4) has been synthesized through reaction of CH_2 ph_2 PAuCl with the cluster anion FeCo_3 (CO)_(12)^-. They are characterized through IR spectra, electronic spectra and XPS, with homogenous analog FeCo_3 (CO)_(12) (μ3-AuPph_3) (3) as reference compound. The cluster (3) and the polymer-supported cluster (4) are good catalysts for hydroformylation of olefins. They have better activity and selectivity than the cluster (1) and (2).The supported cluster (4) is more stable and has catalytic activity at higher temperature than its homogeneous analog (3). From the metal core level binding energies in XPS and λ_(max) in electronic spectra, it is found that the metal-metal bonds in (4) are reinforced bypolymer supporter. The cluster (3) and (4) can be reused , and possibly do not fragment to one metal species in the course of catalytic reaction.
基金financially supported by the National Natural Science Foundation of China (No. 51773178)
文摘Propylene slurry polymerization with a MgCl2-supported Ziegler-Natta catalyst containing internal electron donor was conducted after different durations of pre-contact of the catalyst with triethylaluminum cocatalyst. The number of active centers([C*]/[Ti])was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and measuring sulfur content in the polymer. The pre-contact treatment caused selective deactivation of a part of active centers with low stereoselectivity and much lower activity in the initial stage of polymerization as compared with the polymerization run without the pre-contact stage. The active center concentration and polymerization activity decreased with prolonging of the pre-contact stage. The proportion of stereoselective active centers was increased by prolonging the pre-contact stage, so the isotacticity of produced polypropylene was enhanced. Release of active centers through catalyst particle fragmentation was significantly retarded, and the polymerization rate curve changed from decay type to induction type by the precontact treatment. In the induction period both non-stereoselective and stereoselective active centers were released and activated, resulting in gradual reduction of the polymer’s isotacticity in the first 5-10 min of polymerization. Selective deactivation of non-stereoselective active centers also took place in propylene polymerization using the catalyst without pre-contacting with the cocatalyst. In this case, the polymerization rate decayed with time after a short induction period of 2-5 min. Over reduction of the active center precursors with low stereoselectivity by triethylaluminum was considered as the reason for their deactivation during the pre-contact or the polymerization processes.
文摘A supported iron catalyst, which was prepared by anchoring FeCl2/FeCl3 on the cross-linking macroporous polyacrylate ion exchange resin, was evaluated via the controlled radical polymerization. When a small amount of CuCl2/ Me6TREN was added, the controllability of the polymerization over the iron-mediated catalyst was significantly improved（Mw/Mn = 1.23-1.73 ）, affording a polymer with a low residual metal via a simple catalyst separation procedure. After suitable regeneration, the supported iron catalyst could also he recycled. UV-Vis analysis showed that the additional copper catalyst could facilitate the radical deactivation process.
文摘A new polymer-supported metallocene catalyst has been prepared, The polymer-supported metallocene displayed considerably high activity in ethylene polymerization, the highest being 3.62x10(7) gPE/molZr.h, the molecular weight of the polyethylene produced was Mn = 1.29x10(5). about 3-4 times those of corresponding homogeneous zirconocenes. The polymer-supported metallocene keeps the characteristics of homogeneous metallocene catalysts, and offers some features, such as adaptable to gas phase and slurry processes: easy to prepare in low cost: relatively high activity and lower MAO/Zr ratio; lower inorganic residues in the polyolefins as compared to cases of SiO2, Al2O3 or MgCl2; unitary active structure, no complex surface as with SiO2; good control of morphology of the resulting polymer.
基金financially supported by the National Iranian Petrochemical Company Research and Technology(NIPC-RT)
文摘Ethylene polymerization was carried out by immobilization of rac-ethylenebis（1-indenyl）zirconium dichloride （Et（Ind）2ZrCl2） and rac-dimethylsilylbis（1-indenyl）zirconium dichloride （Me2Si（Ind）2ZrCl2） preactivated with methylaluminoxane （MAO） on calcinated silica at different temperatures. Polymerizations of ethylene were conducted at different temperatures to find the optimized polymerization temperature for maximum activity of the catalyst. The Me2Si bridge catalyst showed higher activity at the lower polymerization temperature compared to the Et bridge catalyst. The highest catalytic activities were obtained at temperatures about 50 ~C and 70 ~C for Me2Si（Ind）2ZrC1JMAO and Et（Ind）zZrCI2/MAO catalysts systems, respectively. Inductively coupled plasma-atomic emission spectroscopy results and polymerization activity results confirmed that the best temperature for calcinating silica was about 450 ℃ for both catalysts systems. The melting points of the produced polyethylene were about 130 ℃, which could be attributed to the linear structure of HDPE.
基金This work was supported by the National Natural Science Foundation of China (grant No. 20174034, 20274037).
文摘A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.
基金National Natural Science Foundation of China (No. 20272062)
文摘Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.
文摘Nanosized fibrous cerium（IV） hydrogen phosphate membrane, Ce（HPO4）2·2.9H20 （nCePf）, was prepared and characterized by chemical, XRD （X-ray diffraction）, TGA （thermogravimetric analysis）, SEM （scanning electron microscopy） and TEM （transmission electron microscopy）. Novel supported nanofibrous Ce（IV） phosphate/polyiondole nanocomposite membranes were prepared via in-situ chemical oxidation of the monomer that was promoted by the reduction of Ce（IV） ions present in the inorganic matrix. The presence of Ce（IV） ions allows redox reactions necessary to oxidative polymerization to occur. The resultant material was characterized by TGA, elemental （C, H, N） analysis and FT-IR （Fourier transform spectroscopy）. SEM images of the resulting nanocomposite reveals a uniform distribution of the polymer on the inorganic matrix. Amount of polyindole polymer present in the composite is found to be - 7.0%.
文摘In the preparation of catalyst for propylene polymerization, the Mg(OEt) 2 support was activated with ethanol/CO 2 system followed by solidification, and treated with TiCl 4 in the presence of ethylbenzoate as an internal donor(ID). The chemical compositions of the activated support and the prepared catalyst were examined in detail. During the dissolution of Mg(OEt) 2 support in ethanol medium with CO 2 bubbling, the structure of support changed to magnesium hydrocarbyl carbonate, (CH 3CH 2O) 2- x Mg(O (C O) OCH 2CH 3) x ( x = 1,2). The content of carbonated CO 2 in the activated support was dependent on the heat treatment in the solidification of support. In the preparation procedure of polymerization catalyst, the activated support was treated with TiCl 4 so that the structure of support was converted to MgCl 2 with the incorporation of ID. The polymerization behavior of the pre-pared catalyst was also studied in the presence of phenyltriethoxysilane as an external donor.
基金supported by the National Natural Science Foundation of China (No. 21074108)the Major State Basic Research Programs (No. 2011CB606001)
文摘In this article, the effect of diethylaluminum chloride （DEAC） in propylene polymerization with MgC12-supported Ziegler-Natta catalyst was studied. Addition of DEAC in the catalyst system caused evident change in catalytic activity and polymer chain structure. The activity decrease in raising DEAC/Ti molar ratio from 0 to 2 is a result of depressed production of isotactic polypropylene chains. The number of active centers in fractions of each polymer sample was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and fractionating the polymer into isotactic, medium- isotactic and atactic fractions. The number of active centers in isotactic fraction （[Ci＊]/[Ti]） was lowered by increasing DEAC/Ti molar ratio to 2, but further increasing the DEAC/Ti molar ratio to 20 caused marked increase of [Ci＊]/[Ti]. The number of active centers that produce atactic and medium-isotactic PP chains was less influenced by DEAC in the range of DEAC/Ti = 0-10, but increased when the DEAC/Ti molar ratio was further raised to 20. The propagation rate constant of Ci＊ （k^i） was evidently increased when DEAC/Ti molar ratio was raised from 0 to 5, but further increase in DEAC/Ti ratio caused gradual decrease in kpi. The complicated effect of DEAC on the polymerization kinetics, catalysis behaviors and polymer structure can be reasonably explained by adsorption of DEAC on the central metal of the active centers or on Mg atoms adjacent to the central metal
文摘he polymers containing different ligand groups of atoms(mainly O,N,and S)and their rare earth complexes were prepared,characterized and classified based on the type of metal-ligand bonding. The catalytic activities of the complexes are briefly discussed.The polymer- supported rare earth complexes shwed much greater activities than the correspond- ing complexes with a low molecular weight.
