Polygonal fault systems(PFS),characterized by multi-directional fault patterns within layered sequences,are well-documented features in global continental margin basins.While the geometry and formation mechanisms of P...Polygonal fault systems(PFS),characterized by multi-directional fault patterns within layered sequences,are well-documented features in global continental margin basins.While the geometry and formation mechanisms of PFS have been extensively studied in the northern South China Sea,the PFS in the Zhongjiannan Basin(western South China Sea)remain relatively unexplored,with a lack of quantitative analysis regarding their propagation.This study addresses this gap by using high-resolution three-dimensional(3D)seismic data and conducting a quantitative fault analysis to thoroughly examine the planform,cross-sectional geometry,and evolution of PFS in the northern Zhongjiannan Basin.The absence of a dominant strike direction among these polygonal faults suggests that their evolution is not controlled by anisotropic stress.Our interpretation of seismic data,constrained by the spatial relationship among PFS,gullies,and pockmarks,indicates that PFS mainly developed within the Miocene strata,with their initiation occurring during the late Miocene.Furthermore,the PFS act as key conduits connecting gullies to pockmarks in this area.The formation and development of PFS may be primarily driven by thermally triggered processes within siliceous sediments.The necessary heat source is probably associated with the abundant submarine magmatism observed in the Zhongjiannan Basin.To reconstruct the regional geological history,a four-stage evolutionary model,incorporating the formation of PFS,is presented.This research significantly improves our understanding of the regional geological evolution of the Zhongjiannan Basin,providing critical insights into the initiation and development of PFS in the western South China Sea.展开更多
Three heuristic algorithms for optimal polygonal approximation of digital planar curves is presented. With Genetic Algorithm (GA), improved Genetic Algorithm (IGA) based on Pareto optimal solution and Tabu Search (TS)...Three heuristic algorithms for optimal polygonal approximation of digital planar curves is presented. With Genetic Algorithm (GA), improved Genetic Algorithm (IGA) based on Pareto optimal solution and Tabu Search (TS), a near optimal polygonal approximation was obtained. Compared to the famous Teh chin algorithm, our algorithms have obtained the approximated polygons with less number of vertices and less approximation error. Compared to the dynamic programming algorithm, the processing time of our algorithms are much less expensive.展开更多
Conventional soil maps contain valuable knowledge on soil–environment relationships.Such knowledge can be extracted for use when updating conventional soil maps with improved environmental data.Existing methods take ...Conventional soil maps contain valuable knowledge on soil–environment relationships.Such knowledge can be extracted for use when updating conventional soil maps with improved environmental data.Existing methods take all polygons of the same map unit on a map as a whole to extract the soil–environment relationship.Such approach ignores the difference in the environmental conditions represented by individual soil polygons of the same map unit.This paper proposes a method of mining soil–environment relationships from individual soil polygons to update conventional soil maps.The proposed method consists of three major steps.Firstly,the soil–environment relationships represented by each individual polygon on a conventional soil map are extracted in the form of frequency distribution curves for the involved environmental covariates.Secondly,for each environmental covariate,these frequency distribution curves from individual polygons of the same soil map unit are synthesized to form the overall soil–environment relationship for that soil map unit across the mapped area.And lastly,the extracted soil–environment relationships are applied to updating the conventional soil map with new,improved environmental data by adopting a soil land inference model(SoLIM)framework.This study applied the proposed method to updating a conventional soil map of the Raffelson watershed in La Crosse County,Wisconsin,United States.The result from the proposed method was compared with that from the previous method of taking all polygons within the same soil map unit on a map as a whole.Evaluation results with independent soil samples showed that the proposed method exhibited better performance and produced higher accuracy.展开更多
This paper is to investigate the convergence rate of asymptotic normality of frequency polygon estimation for density function under mixing random fields, which include strongly mixing condition and some weaker mixing...This paper is to investigate the convergence rate of asymptotic normality of frequency polygon estimation for density function under mixing random fields, which include strongly mixing condition and some weaker mixing conditions. A Berry-Esseen bound of frequency polygon is established and the convergence rates of asymptotic normality are derived. In particularly, for the optimal bin width , it is showed that the convergence rate of asymptotic normality reaches to ?when mixing coefficient tends to zero exponentially fast.展开更多
In design science, these two kinds of problems are mutually nested, however, the nesting could not blind us for the fact that their problem-solving and solution justification methods are different. The ant algorithms ...In design science, these two kinds of problems are mutually nested, however, the nesting could not blind us for the fact that their problem-solving and solution justification methods are different. The ant algorithms research field, builds on the idea that the study of the behavior of ant colonies or other social insects is interesting, because it provides models of distributed organization which could be utilized as a source of inspiration for the design of optimization and distributed control algorithms. In this paper, a relatively new type of hybridizing ant search algorithm is developed, and the results are compared against other algorithms. The intelligence of this heuristic approach is not portrayed by individual ants, but rather is expressed by the colony as a whole inspired by labor division and brood sorting. This solution obtained by this method will be evaluated against the one obtained by other traditional heuristics.展开更多
The Songliao Basin in northeast China is one of the largest petroliferous basins worldwide,and features the T_(2)fault system,which consists of numerous minor extensional normal faults.This study combines high-resolut...The Songliao Basin in northeast China is one of the largest petroliferous basins worldwide,and features the T_(2)fault system,which consists of numerous minor extensional normal faults.This study combines high-resolution 3D seismic datasets to detail the characteristics of the T_(2)fault system,contributing two key findings:(1)The T_(2)faults are confirmed as polygonal fault systems,characterized by closely spaced,layer-bounded faults with small throws,high dip angles,and random orientations,forming intricate polygonal networks.(2)The study reveals the influence of tectonic stresses on the fault system,showing spatial variations across different tectonic units.In depressions,T_(2)faults exhibit short lengths,small throws,high density,and multiple directions.In contrast,in inverted anticline belts,they have longer lengths,bigger throws,higher density,and concordant orientations.These variations demonstrate the impact of tectonic inversion on the development of T_(2)faults.The significance of this research lies in presenting a typical polygonal fault system developed in a deep lake succession and was superposed the influence by regional tectonic stress coeval with its development.The new insights facilitate a reevaluation of the T_(2)fault system's role in hydrocarbon migration and accumulation within the Songliao Basin.展开更多
Two new recognition methods for the spatial planar POlygon using perspective invariants are presented. The corss-ratio (R c) of a vetex and the co-base area rotio (RA) of a edge in a spatial planar polygon are propose...Two new recognition methods for the spatial planar POlygon using perspective invariants are presented. The corss-ratio (R c) of a vetex and the co-base area rotio (RA) of a edge in a spatial planar polygon are proposed and used as the invariant primitive of the recognition eigenvector. The second distance error decision rule (SD EDR) estimating the relative error of RA is introduced also too. The mthods could recognize a spatial planar polygon with an arbitrary orientation through only a single perspective view. Experimental examples are gievn.展开更多
This paper provides a gradient search algorithm for finding the maximal visible area polygon (VAP) viewed by an interior point in a simple polygon P. The algorithm is based on a natural partition of P into convex sets...This paper provides a gradient search algorithm for finding the maximal visible area polygon (VAP) viewed by an interior point in a simple polygon P. The algorithm is based on a natural partition of P into convex sets, such that each element of the partition is associated with a unique analytical form of the area function. We call this partition a back diagonal partition of P. Our maximal VAP algorithm converges in a finite number of steps, and is polynomial with a complexity of , for a simple polygon P with n vertices, and r reflex vertices. We use the maximal VAP algorithm as a basis for a greedy heuristic for the well known guardhouse problem with a computation complexity of .展开更多
With the increasing tunnel construction projects in China,geological hazards and construction accidents in tunnels occur frequently.The widely applied intelligent detection of ground-penetrating radar(GPR)for tunnel a...With the increasing tunnel construction projects in China,geological hazards and construction accidents in tunnels occur frequently.The widely applied intelligent detection of ground-penetrating radar(GPR)for tunnel advance geological forecast(TAGF)rarely involves research and application exploration on irregular structures.The GPR dataset for TAGF in the Guangxi region meets the requirements for isomorphic source domain feature extraction.This paper proposes a methodology for creating polygon labeling of irregular structures and develops an image segmentation approach based on the Yolov5s deep learning framework,establishing the polygon-Yolov5s intelligent forecasting network for irregular geological hazards in GPR tunnel detection.Through case trials using both numerical and actual TAGF datasets,the feasibility and effectiveness of the proposed algorithm are validated by using the SSD algorithm and the traditional Yolov5s algorithm.The effective utilization of intelligent interpretation systems for irregular geological hazards would improve the efficiency and accuracy of geological forecasting and operational maintenance detection.展开更多
Polygonal faults(PFs)generally have a classic polygonal geometry in map view.However,under the influence of tectonic faults,diapirs,channels,and slopes,the classic polygonal geometry of PFs is not preserved,demonstrat...Polygonal faults(PFs)generally have a classic polygonal geometry in map view.However,under the influence of tectonic faults,diapirs,channels,and slopes,the classic polygonal geometry of PFs is not preserved,demonstrating differences(different characters)in map-view 3D seismic data covering an area of 334km^(2) of the Changchang(CC)sag,are used to document the mapview and cross-sectional characteristics of PFs.These data also help investigate the irregularly polygonal geometries of PFs due to the presence of influence factors,such as transtensional faults,submarine fans,channels,diapirs/gas chimneys,and the basal slope within the lower-middle Miocene strata.Results show that various irregularly polygonal geometries of PFs can be classified into enechelon and arcuate PFs,channel-segmenting and-bounding PFs,radial PFs,and rectangular PFs in map-view.En-echelon and arcuate PFs are induced by transtensional faults and exhibit a unique‘flower’structure in NE-and SE-trending cross-sections in the NW area of the study area.This finding is documented for the first time.Channel-segmenting PFs occur in the(northwest)low-amplitude muddy channel and are inhibited in the(southeast)high-amplitude sandy channel in the SW area.Radial PFs are radially aligned around a gas chimney/diapir containing some high-amplitude anomalies(HAAs)in the middle area.The presence of intrusive sandstones with HAAs along the periphery of the diapirs restricts the occurrence of PFs.Two high-amplitude submarine fans act as a mechanical barrier to the propagation of PFs.Meanwhile,the(moderate)slope in the NE area induces rectangular PFs.Additionally,the geneses of the PFs in the current study are comprehensively discussed.This study adds to our understanding of the differences between PFs with irregularly polygonal geometries.展开更多
The electric vertical takeoff and landing(e VTOL)aircraft shows great potential for rapid military personnel deployment on the battlefield.However,its susceptibility to control loss,complex crashes,and extremely limit...The electric vertical takeoff and landing(e VTOL)aircraft shows great potential for rapid military personnel deployment on the battlefield.However,its susceptibility to control loss,complex crashes,and extremely limited bottom energy-absorbing space demands higher comprehensive crashworthiness of its subfloor thin-walled structures.This study investigated the energy absorption capacity of novel concave polygonal carbon fiber reinforced plastics(CFRP)tubes under multi-angle collisions.Quasistatic compression experiments and finite element simulations were conducted to assess the failure mode and energy absorption.The influences of cross-section shapes,loading conditions,and geometry parameters on crashworthiness metrics were further analyzed.The results revealed that,under the similar weight,concave polygonal tubes exhibited superior energy absorption under axial loads compared to regular polygonal and circular tubes,attributed to the increased number of axial splits.However,both regular and concave polygonal tubes,particularly the latter,demonstrated reduced oblique energy absorption compared to traditional square tubes with the increasing ratio of SEA value decreased from 20%-16%.Notably,this reduction in energy absorption can be compensated for by the implementation of inward and outward crusher plugs,and with them,the concave polygonal tubes demonstrated outstanding overall crashworthiness performance under multiple loading conditions.This concave cross-sectional design methods could serve as a guidance for the development of the eVTOL subfloor.展开更多
Over 600 chloride-bearing deposits(chlorides) have been identified on the southern highlands of Mars. These chlorides have critical implications for hydrology and astrobiology: they are indicators of an evaporating su...Over 600 chloride-bearing deposits(chlorides) have been identified on the southern highlands of Mars. These chlorides have critical implications for hydrology and astrobiology: they are indicators of an evaporating super saturated solution, and they could have provided habitat environments for halophilic microorganisms and preserved organic matter. One of the prominent geomorphology characteristics of these chloridebearing regions is the polygonal features within them. The origin of these polygonal features is still in debate. In this study, we have surveyed 153 locations of chlorides using 441 high resolution imaging science experiment(Hi RISE) images to characterize the geomorphology of polygonal features. We identified 3 types of polygonal features of distinct geomorphologic characteristics: fractures, raised ridges, and transitional polygons between fractures and raised ridges. We evaluate previously proposed hypotheses of the formation of the polygonal features, and suggest that the 3 types of polygonal features are indicators of different stages of salt crust formation. Salt crust is usually formed through multiple groundwater activities, and it often occurs in playa environment on Earth. The unique hydrological and astrobiological implications of the chlorides with polygonal features make these deposits of high priority for future landed on and/or sample return exploration missions of Mars.展开更多
Friction stir welding using the tools with polygonal pins is often found to improve the mechanical strength of weld joint in comparison to the tools with circular pins. However, the impacts of pin profile on the peak ...Friction stir welding using the tools with polygonal pins is often found to improve the mechanical strength of weld joint in comparison to the tools with circular pins. However, the impacts of pin profile on the peak temperature, tool torque and traverse force, and the resultant mechanical stresses experienced by the tool have been rarely reported in a systematic manner. An estimation of the rate of heat generation for the tools with polygonal pins is challenging due to their non-axisymmetric cross-section about the tool axis. A novel methodology is presented to analytically estimate the rate of heat generation for the tools with polygonal pins. A three-dimensional heat transfer analysis of friction stir welding is carried out using finite element method. The computed temperature field from the heat transfer model is used to estimate the torque, traverse force and the mechanical stresses experienced by regular triangular, square, pentagon and hexagon pins following the principles of solid mechanics. The computed results show that the peak temperature experienced by the tool pin increases with the number of pin sides. However, the resultant maximum shear stress experienced by the pin reduces from the triangular to hexagonal pins.展开更多
In this article,an Enlarged Polygon/Polyhedron(ELP)method without binary variables is proposed to represent the Convex Polygonal/Polyhedral Obstacle Avoidance(CPOA)constraints in trajectory optimization.First,the equi...In this article,an Enlarged Polygon/Polyhedron(ELP)method without binary variables is proposed to represent the Convex Polygonal/Polyhedral Obstacle Avoidance(CPOA)constraints in trajectory optimization.First,the equivalent condition of a point outside the convex set is given and proved rigorously.Then,the ELP condition describing the CPOA constraints equivalently is given without introducing binary variables,and its geometric meaning is explained.Finally,the ELP method is used to transform the CPOA trajectory optimization problem into an optimal control problem without binary variables.The effectiveness and validity of ELP method are demonstrated through simulations with both simple linear dynamic model(unmanned aerial vehicle)and complex nonlinear dynamic model(hypersonic glide vehicle).Comparison indicates the computational time of ELP method is only 1%-20%of that of the traditional Mixed-Integer Programming(MIP)method.展开更多
An algorithm for partitioning arbitrary simple polygons into a number of convex parts was presented. The concave vertices were determined first, and then they were moved by using the method connecting the concave vert...An algorithm for partitioning arbitrary simple polygons into a number of convex parts was presented. The concave vertices were determined first, and then they were moved by using the method connecting the concave vertices with the vertices of falling into its region B,so that the primary polygon could be partitioned into two subpolygons. Finally, this method was applied recursively to the subpolygons until all the concave vertices were removed. This algorithm partitions the polygon into O(l) convex parts, its time complexity is max(O(n),O(l 2)) multiplications, where n is the number of vertices of the polygon and l is the number of the concave vertices.展开更多
The star-polygon brushless doubly-fed machine (SPBDFM) is a new type of wound-rotor machine and is attractive for variable-speed constant-frequency shaft generation system. The structure of rotor for the machine may b...The star-polygon brushless doubly-fed machine (SPBDFM) is a new type of wound-rotor machine and is attractive for variable-speed constant-frequency shaft generation system. The structure of rotor for the machine may be improving the conductor availability of the rotor windings. The kirchhoff laws is employed to illuminate the principle and some combinations of different slots and poles are presented as the examples. Harmonic analysis is also employed to analyze the magnetic motive force (MMF) waveform of rotor winding with the structure of star- polygon. Finally, the results are used to reveal that the SPBDFM is attractive for shaft generation system.展开更多
This paper presents a detailed investigation, via field experiment, into the mechanism of high-order polygonal wear of wheels of a new type of high-speed train. The investigation was carried out during the performance...This paper presents a detailed investigation, via field experiment, into the mechanism of high-order polygonal wear of wheels of a new type of high-speed train. The investigation was carried out during the performance acceptance test of the train and its initial commercial operation. The investigation covered the performance acceptance test of 150 000 km and the commercial operation of about 150 000 km. In the performance acceptance test of the first stage of about 70 000 km, at 200-250 km/h with full loading and sometimes overloading by 30%, the serious polygonal wear of 23-order took place on all the wheels of the train, and was measured and analyzed in detail. All the potygonized wheels were re-profiled because the polygonal wear had caused strong vibration and damage to the train parts. After re-profiling, the vibration of the train and track and the wear status of the wheels were measured and analyzed at different test mileages according to the polygonal wear situation of the wheels. The measured vibration of the train includes the accelerations at different positions of a motor car and a trail car. The vibration modes of the key parts of the bogies of the two cars were calculated. Meanwhile, the track resonant frequencies were investigated at the site. The purpose of the above tests and analysis is try to find the frequency of work mode matching the passing frequency of the high-order wheel polygon. The present investigation shows that one of the working models causes the formation and development of the high-order wheel polygonal wear. The growth of this wear was effectively reduced through the frequent changing of the running speed of the train operating on the way back and forth every day.展开更多
To achieve a maximum compression of system matrix in positron emission tomography (PET) image reconstruction, we proposed a polygonal image pixel division strategy in accordance with rotationally symmetric PET geometr...To achieve a maximum compression of system matrix in positron emission tomography (PET) image reconstruction, we proposed a polygonal image pixel division strategy in accordance with rotationally symmetric PET geometry. Geometrical definition and indexing rule for polygonal pixels were established. Image conversion from polygonal pixel structure to conventional rectangular pixel structure was implemented using a conversion matrix. A set of test images were analytically defined in polygonal pixel structure, converted to conventional rectangular pixel based images, and correctly displayed which verified the correctness of the image definition, conversion description and conversion of polygonal pixel structure. A compressed system matrix for PET image recon was generated by tap model and tested by forward-projecting three different distributions of radioactive sources to the sinogram domain and comparing them with theoretical predictions. On a practical small animal PET scanner, a compress ratio of 12.6:1 of the system matrix size was achieved with the polygonal pixel structure, comparing with the conventional rectangular pixel based tap-mode one. OS-EM iterative image reconstruction algorithms with the polygonal and conventional Cartesian pixel grid were developed. A hot rod phantom was detected and reconstructed based on these two grids with reasonable time cost. Image resolution of reconstructed images was both 1.35 mm. We conclude that it is feasible to reconstruct and display images in a polygonal image pixel structure based on a compressed system matrix in PET image reconstruction.展开更多
Based on the deformation characteristic of regular polygonal box stamped parts and the superfluous triangle material wrinkle model,the criterion of regular polygonal box stamped parts without wrinkle was deduced and u...Based on the deformation characteristic of regular polygonal box stamped parts and the superfluous triangle material wrinkle model,the criterion of regular polygonal box stamped parts without wrinkle was deduced and used to predict and control the wrinkle limit.According to the fracture model,the criterion of regular polygonal box stamped parts without fracture was deduced and used to predict and control the fracture limit.Combining the criterion for stamping without wrinkle with that without fracture,the stamping criterion of regular polygonal box stamped parts was obtained to predict and control the stamping limit.Taken the stainless steel0Cr18Ni9(SUS304)sheet and the square box stamped part as examples,the limit diagram was given to predict and control the wrinkle,fracture and stamping limits.It is suitable for the deep drawing without flange,the deep drawing and stretching combined forming with flange and the rigid punch stretching of plane blank.The limit deep-drawing coefficient and the minimum deep-drawing coefficient can be determined,and the appropriate BHF(blank holder force)and the deep-drawing force can be chosen.These provide a reference for the technology planning,the die and mold design and the equipment determination,and a new criterion evaluating sheet stamping formability,which predicts and controls the stamping process,can be applied to the deep drawing under constant or variable BHF conditions.展开更多
基金financially supported by the National Key Research and Development Program of China(No.2021YFC3100700)the National Natural Science Foundation of China(No.42376070)+1 种基金the Natural Science Foundation of Guangdong Province(No.2024A1515012371)the Rising Star Foundation of the South China Sea Institute of Oceanology(No.NHXX2019DZ0201)。
文摘Polygonal fault systems(PFS),characterized by multi-directional fault patterns within layered sequences,are well-documented features in global continental margin basins.While the geometry and formation mechanisms of PFS have been extensively studied in the northern South China Sea,the PFS in the Zhongjiannan Basin(western South China Sea)remain relatively unexplored,with a lack of quantitative analysis regarding their propagation.This study addresses this gap by using high-resolution three-dimensional(3D)seismic data and conducting a quantitative fault analysis to thoroughly examine the planform,cross-sectional geometry,and evolution of PFS in the northern Zhongjiannan Basin.The absence of a dominant strike direction among these polygonal faults suggests that their evolution is not controlled by anisotropic stress.Our interpretation of seismic data,constrained by the spatial relationship among PFS,gullies,and pockmarks,indicates that PFS mainly developed within the Miocene strata,with their initiation occurring during the late Miocene.Furthermore,the PFS act as key conduits connecting gullies to pockmarks in this area.The formation and development of PFS may be primarily driven by thermally triggered processes within siliceous sediments.The necessary heat source is probably associated with the abundant submarine magmatism observed in the Zhongjiannan Basin.To reconstruct the regional geological history,a four-stage evolutionary model,incorporating the formation of PFS,is presented.This research significantly improves our understanding of the regional geological evolution of the Zhongjiannan Basin,providing critical insights into the initiation and development of PFS in the western South China Sea.
文摘Three heuristic algorithms for optimal polygonal approximation of digital planar curves is presented. With Genetic Algorithm (GA), improved Genetic Algorithm (IGA) based on Pareto optimal solution and Tabu Search (TS), a near optimal polygonal approximation was obtained. Compared to the famous Teh chin algorithm, our algorithms have obtained the approximated polygons with less number of vertices and less approximation error. Compared to the dynamic programming algorithm, the processing time of our algorithms are much less expensive.
基金supported by the National Natural Science Foundation of China (41431177 and 41422109)the Innovation Project of State Key Laboratory of Resources and Environmental Information System of China (O88RA20CYA)the Outstanding Innovation Team in Colleges and Universities in Jiangsu Province, China
文摘Conventional soil maps contain valuable knowledge on soil–environment relationships.Such knowledge can be extracted for use when updating conventional soil maps with improved environmental data.Existing methods take all polygons of the same map unit on a map as a whole to extract the soil–environment relationship.Such approach ignores the difference in the environmental conditions represented by individual soil polygons of the same map unit.This paper proposes a method of mining soil–environment relationships from individual soil polygons to update conventional soil maps.The proposed method consists of three major steps.Firstly,the soil–environment relationships represented by each individual polygon on a conventional soil map are extracted in the form of frequency distribution curves for the involved environmental covariates.Secondly,for each environmental covariate,these frequency distribution curves from individual polygons of the same soil map unit are synthesized to form the overall soil–environment relationship for that soil map unit across the mapped area.And lastly,the extracted soil–environment relationships are applied to updating the conventional soil map with new,improved environmental data by adopting a soil land inference model(SoLIM)framework.This study applied the proposed method to updating a conventional soil map of the Raffelson watershed in La Crosse County,Wisconsin,United States.The result from the proposed method was compared with that from the previous method of taking all polygons within the same soil map unit on a map as a whole.Evaluation results with independent soil samples showed that the proposed method exhibited better performance and produced higher accuracy.
文摘This paper is to investigate the convergence rate of asymptotic normality of frequency polygon estimation for density function under mixing random fields, which include strongly mixing condition and some weaker mixing conditions. A Berry-Esseen bound of frequency polygon is established and the convergence rates of asymptotic normality are derived. In particularly, for the optimal bin width , it is showed that the convergence rate of asymptotic normality reaches to ?when mixing coefficient tends to zero exponentially fast.
文摘In design science, these two kinds of problems are mutually nested, however, the nesting could not blind us for the fact that their problem-solving and solution justification methods are different. The ant algorithms research field, builds on the idea that the study of the behavior of ant colonies or other social insects is interesting, because it provides models of distributed organization which could be utilized as a source of inspiration for the design of optimization and distributed control algorithms. In this paper, a relatively new type of hybridizing ant search algorithm is developed, and the results are compared against other algorithms. The intelligence of this heuristic approach is not portrayed by individual ants, but rather is expressed by the colony as a whole inspired by labor division and brood sorting. This solution obtained by this method will be evaluated against the one obtained by other traditional heuristics.
基金supported by the Open Funds for Hubei Key Laboratory of Marine Geological Resources,China University of Geosciences(No.MGR202303)the National Natural Science Foundation of China(No.41672110)。
文摘The Songliao Basin in northeast China is one of the largest petroliferous basins worldwide,and features the T_(2)fault system,which consists of numerous minor extensional normal faults.This study combines high-resolution 3D seismic datasets to detail the characteristics of the T_(2)fault system,contributing two key findings:(1)The T_(2)faults are confirmed as polygonal fault systems,characterized by closely spaced,layer-bounded faults with small throws,high dip angles,and random orientations,forming intricate polygonal networks.(2)The study reveals the influence of tectonic stresses on the fault system,showing spatial variations across different tectonic units.In depressions,T_(2)faults exhibit short lengths,small throws,high density,and multiple directions.In contrast,in inverted anticline belts,they have longer lengths,bigger throws,higher density,and concordant orientations.These variations demonstrate the impact of tectonic inversion on the development of T_(2)faults.The significance of this research lies in presenting a typical polygonal fault system developed in a deep lake succession and was superposed the influence by regional tectonic stress coeval with its development.The new insights facilitate a reevaluation of the T_(2)fault system's role in hydrocarbon migration and accumulation within the Songliao Basin.
文摘Two new recognition methods for the spatial planar POlygon using perspective invariants are presented. The corss-ratio (R c) of a vetex and the co-base area rotio (RA) of a edge in a spatial planar polygon are proposed and used as the invariant primitive of the recognition eigenvector. The second distance error decision rule (SD EDR) estimating the relative error of RA is introduced also too. The mthods could recognize a spatial planar polygon with an arbitrary orientation through only a single perspective view. Experimental examples are gievn.
文摘This paper provides a gradient search algorithm for finding the maximal visible area polygon (VAP) viewed by an interior point in a simple polygon P. The algorithm is based on a natural partition of P into convex sets, such that each element of the partition is associated with a unique analytical form of the area function. We call this partition a back diagonal partition of P. Our maximal VAP algorithm converges in a finite number of steps, and is polynomial with a complexity of , for a simple polygon P with n vertices, and r reflex vertices. We use the maximal VAP algorithm as a basis for a greedy heuristic for the well known guardhouse problem with a computation complexity of .
文摘With the increasing tunnel construction projects in China,geological hazards and construction accidents in tunnels occur frequently.The widely applied intelligent detection of ground-penetrating radar(GPR)for tunnel advance geological forecast(TAGF)rarely involves research and application exploration on irregular structures.The GPR dataset for TAGF in the Guangxi region meets the requirements for isomorphic source domain feature extraction.This paper proposes a methodology for creating polygon labeling of irregular structures and develops an image segmentation approach based on the Yolov5s deep learning framework,establishing the polygon-Yolov5s intelligent forecasting network for irregular geological hazards in GPR tunnel detection.Through case trials using both numerical and actual TAGF datasets,the feasibility and effectiveness of the proposed algorithm are validated by using the SSD algorithm and the traditional Yolov5s algorithm.The effective utilization of intelligent interpretation systems for irregular geological hazards would improve the efficiency and accuracy of geological forecasting and operational maintenance detection.
基金supported by the Key Laboratory of Marine Mineral Resources,Ministry of Land and Resources of China(No.KLMMR-2018-B-07)the National Basic Research Program of China(No.2011ZX05025-006-02)the National Natural Science Foundation of China(No.41672206)。
文摘Polygonal faults(PFs)generally have a classic polygonal geometry in map view.However,under the influence of tectonic faults,diapirs,channels,and slopes,the classic polygonal geometry of PFs is not preserved,demonstrating differences(different characters)in map-view 3D seismic data covering an area of 334km^(2) of the Changchang(CC)sag,are used to document the mapview and cross-sectional characteristics of PFs.These data also help investigate the irregularly polygonal geometries of PFs due to the presence of influence factors,such as transtensional faults,submarine fans,channels,diapirs/gas chimneys,and the basal slope within the lower-middle Miocene strata.Results show that various irregularly polygonal geometries of PFs can be classified into enechelon and arcuate PFs,channel-segmenting and-bounding PFs,radial PFs,and rectangular PFs in map-view.En-echelon and arcuate PFs are induced by transtensional faults and exhibit a unique‘flower’structure in NE-and SE-trending cross-sections in the NW area of the study area.This finding is documented for the first time.Channel-segmenting PFs occur in the(northwest)low-amplitude muddy channel and are inhibited in the(southeast)high-amplitude sandy channel in the SW area.Radial PFs are radially aligned around a gas chimney/diapir containing some high-amplitude anomalies(HAAs)in the middle area.The presence of intrusive sandstones with HAAs along the periphery of the diapirs restricts the occurrence of PFs.Two high-amplitude submarine fans act as a mechanical barrier to the propagation of PFs.Meanwhile,the(moderate)slope in the NE area induces rectangular PFs.Additionally,the geneses of the PFs in the current study are comprehensively discussed.This study adds to our understanding of the differences between PFs with irregularly polygonal geometries.
基金financially supported by the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(Grant No.24qnpy041)the Science and Technology Innovation Key R&D Program of Chongqing(Grant No.CSTB2023TIAD-STX0030)。
文摘The electric vertical takeoff and landing(e VTOL)aircraft shows great potential for rapid military personnel deployment on the battlefield.However,its susceptibility to control loss,complex crashes,and extremely limited bottom energy-absorbing space demands higher comprehensive crashworthiness of its subfloor thin-walled structures.This study investigated the energy absorption capacity of novel concave polygonal carbon fiber reinforced plastics(CFRP)tubes under multi-angle collisions.Quasistatic compression experiments and finite element simulations were conducted to assess the failure mode and energy absorption.The influences of cross-section shapes,loading conditions,and geometry parameters on crashworthiness metrics were further analyzed.The results revealed that,under the similar weight,concave polygonal tubes exhibited superior energy absorption under axial loads compared to regular polygonal and circular tubes,attributed to the increased number of axial splits.However,both regular and concave polygonal tubes,particularly the latter,demonstrated reduced oblique energy absorption compared to traditional square tubes with the increasing ratio of SEA value decreased from 20%-16%.Notably,this reduction in energy absorption can be compensated for by the implementation of inward and outward crusher plugs,and with them,the concave polygonal tubes demonstrated outstanding overall crashworthiness performance under multiple loading conditions.This concave cross-sectional design methods could serve as a guidance for the development of the eVTOL subfloor.
基金supported by the National Scientific Foundation of China(Nos.41403052,41773061,41830214)the Fundamental Research Funds for the Central Universities,China University of Geosciences(Wuhan)(Nos.CUGL160402,CUG2017G02)+1 种基金the Lunar and Planetary Science Laboratory,Macao University of Science and Technology Partner Laboratory of Key Laboratory of Lunar and Deep Space Exploration,Chinese Academy of Sciences(Nos.039/2013/A2,121/2017/A3)supported by the National Training Program of Innovation and Entrepreneurship for Undergraduates(No.201610491122)
文摘Over 600 chloride-bearing deposits(chlorides) have been identified on the southern highlands of Mars. These chlorides have critical implications for hydrology and astrobiology: they are indicators of an evaporating super saturated solution, and they could have provided habitat environments for halophilic microorganisms and preserved organic matter. One of the prominent geomorphology characteristics of these chloridebearing regions is the polygonal features within them. The origin of these polygonal features is still in debate. In this study, we have surveyed 153 locations of chlorides using 441 high resolution imaging science experiment(Hi RISE) images to characterize the geomorphology of polygonal features. We identified 3 types of polygonal features of distinct geomorphologic characteristics: fractures, raised ridges, and transitional polygons between fractures and raised ridges. We evaluate previously proposed hypotheses of the formation of the polygonal features, and suggest that the 3 types of polygonal features are indicators of different stages of salt crust formation. Salt crust is usually formed through multiple groundwater activities, and it often occurs in playa environment on Earth. The unique hydrological and astrobiological implications of the chlorides with polygonal features make these deposits of high priority for future landed on and/or sample return exploration missions of Mars.
文摘Friction stir welding using the tools with polygonal pins is often found to improve the mechanical strength of weld joint in comparison to the tools with circular pins. However, the impacts of pin profile on the peak temperature, tool torque and traverse force, and the resultant mechanical stresses experienced by the tool have been rarely reported in a systematic manner. An estimation of the rate of heat generation for the tools with polygonal pins is challenging due to their non-axisymmetric cross-section about the tool axis. A novel methodology is presented to analytically estimate the rate of heat generation for the tools with polygonal pins. A three-dimensional heat transfer analysis of friction stir welding is carried out using finite element method. The computed temperature field from the heat transfer model is used to estimate the torque, traverse force and the mechanical stresses experienced by regular triangular, square, pentagon and hexagon pins following the principles of solid mechanics. The computed results show that the peak temperature experienced by the tool pin increases with the number of pin sides. However, the resultant maximum shear stress experienced by the pin reduces from the triangular to hexagonal pins.
基金supported by the National Natural Science Foundation of China(No.52232014)the National Natural Science Foundation of China Joint Fund(No.U2241215)。
文摘In this article,an Enlarged Polygon/Polyhedron(ELP)method without binary variables is proposed to represent the Convex Polygonal/Polyhedral Obstacle Avoidance(CPOA)constraints in trajectory optimization.First,the equivalent condition of a point outside the convex set is given and proved rigorously.Then,the ELP condition describing the CPOA constraints equivalently is given without introducing binary variables,and its geometric meaning is explained.Finally,the ELP method is used to transform the CPOA trajectory optimization problem into an optimal control problem without binary variables.The effectiveness and validity of ELP method are demonstrated through simulations with both simple linear dynamic model(unmanned aerial vehicle)and complex nonlinear dynamic model(hypersonic glide vehicle).Comparison indicates the computational time of ELP method is only 1%-20%of that of the traditional Mixed-Integer Programming(MIP)method.
文摘An algorithm for partitioning arbitrary simple polygons into a number of convex parts was presented. The concave vertices were determined first, and then they were moved by using the method connecting the concave vertices with the vertices of falling into its region B,so that the primary polygon could be partitioned into two subpolygons. Finally, this method was applied recursively to the subpolygons until all the concave vertices were removed. This algorithm partitions the polygon into O(l) convex parts, its time complexity is max(O(n),O(l 2)) multiplications, where n is the number of vertices of the polygon and l is the number of the concave vertices.
文摘The star-polygon brushless doubly-fed machine (SPBDFM) is a new type of wound-rotor machine and is attractive for variable-speed constant-frequency shaft generation system. The structure of rotor for the machine may be improving the conductor availability of the rotor windings. The kirchhoff laws is employed to illuminate the principle and some combinations of different slots and poles are presented as the examples. Harmonic analysis is also employed to analyze the magnetic motive force (MMF) waveform of rotor winding with the structure of star- polygon. Finally, the results are used to reveal that the SPBDFM is attractive for shaft generation system.
基金Project supported by the National Natural Science Foundation of China （No. U 1134202）
文摘This paper presents a detailed investigation, via field experiment, into the mechanism of high-order polygonal wear of wheels of a new type of high-speed train. The investigation was carried out during the performance acceptance test of the train and its initial commercial operation. The investigation covered the performance acceptance test of 150 000 km and the commercial operation of about 150 000 km. In the performance acceptance test of the first stage of about 70 000 km, at 200-250 km/h with full loading and sometimes overloading by 30%, the serious polygonal wear of 23-order took place on all the wheels of the train, and was measured and analyzed in detail. All the potygonized wheels were re-profiled because the polygonal wear had caused strong vibration and damage to the train parts. After re-profiling, the vibration of the train and track and the wear status of the wheels were measured and analyzed at different test mileages according to the polygonal wear situation of the wheels. The measured vibration of the train includes the accelerations at different positions of a motor car and a trail car. The vibration modes of the key parts of the bogies of the two cars were calculated. Meanwhile, the track resonant frequencies were investigated at the site. The purpose of the above tests and analysis is try to find the frequency of work mode matching the passing frequency of the high-order wheel polygon. The present investigation shows that one of the working models causes the formation and development of the high-order wheel polygonal wear. The growth of this wear was effectively reduced through the frequent changing of the running speed of the train operating on the way back and forth every day.
基金Supported by Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministry and National Natural Science Foundation of China(No.10975086)
文摘To achieve a maximum compression of system matrix in positron emission tomography (PET) image reconstruction, we proposed a polygonal image pixel division strategy in accordance with rotationally symmetric PET geometry. Geometrical definition and indexing rule for polygonal pixels were established. Image conversion from polygonal pixel structure to conventional rectangular pixel structure was implemented using a conversion matrix. A set of test images were analytically defined in polygonal pixel structure, converted to conventional rectangular pixel based images, and correctly displayed which verified the correctness of the image definition, conversion description and conversion of polygonal pixel structure. A compressed system matrix for PET image recon was generated by tap model and tested by forward-projecting three different distributions of radioactive sources to the sinogram domain and comparing them with theoretical predictions. On a practical small animal PET scanner, a compress ratio of 12.6:1 of the system matrix size was achieved with the polygonal pixel structure, comparing with the conventional rectangular pixel based tap-mode one. OS-EM iterative image reconstruction algorithms with the polygonal and conventional Cartesian pixel grid were developed. A hot rod phantom was detected and reconstructed based on these two grids with reasonable time cost. Image resolution of reconstructed images was both 1.35 mm. We conclude that it is feasible to reconstruct and display images in a polygonal image pixel structure based on a compressed system matrix in PET image reconstruction.
文摘Based on the deformation characteristic of regular polygonal box stamped parts and the superfluous triangle material wrinkle model,the criterion of regular polygonal box stamped parts without wrinkle was deduced and used to predict and control the wrinkle limit.According to the fracture model,the criterion of regular polygonal box stamped parts without fracture was deduced and used to predict and control the fracture limit.Combining the criterion for stamping without wrinkle with that without fracture,the stamping criterion of regular polygonal box stamped parts was obtained to predict and control the stamping limit.Taken the stainless steel0Cr18Ni9(SUS304)sheet and the square box stamped part as examples,the limit diagram was given to predict and control the wrinkle,fracture and stamping limits.It is suitable for the deep drawing without flange,the deep drawing and stretching combined forming with flange and the rigid punch stretching of plane blank.The limit deep-drawing coefficient and the minimum deep-drawing coefficient can be determined,and the appropriate BHF(blank holder force)and the deep-drawing force can be chosen.These provide a reference for the technology planning,the die and mold design and the equipment determination,and a new criterion evaluating sheet stamping formability,which predicts and controls the stamping process,can be applied to the deep drawing under constant or variable BHF conditions.
