In this work, a fully rigid coplanar symmetric heterocyclic unit was introduced into the rigid polyimide macromolecular backbone structure to prepare high-performance polyimide fibers. The novel co-polyimide(co-PI) fi...In this work, a fully rigid coplanar symmetric heterocyclic unit was introduced into the rigid polyimide macromolecular backbone structure to prepare high-performance polyimide fibers. The novel co-polyimide(co-PI) fibers based on 3,3',4,4'-biphenyltetracarboxylic anhydride(BPDA), p-phenylenediamine(PDA) and 2,6-(4,4'-diaminodiphenyl) benzo[1,2-d:5,4-d'] bisoxazole(PBOA) were fabricated via a twostep wet-spinning method. The effects of benzobisoxazole moiety on spinnability, aggregation structure, and mechanical properties of fibers were systematically discussed. The detailed structural analysis revealed that the well-defined aggregation structures of co-PI fibers were obtained from initial amorphous structure when post hot-drawing temperature was higher than 460 ℃ under proper drawing ratio, and the incorporation PBOA into BPDA-PDA structures produced more compact structural co-PI fiber than homo BPDA-PDA fiber. The BPDA-PDA/PBOA co-PI fibers exhibited optimum tensile strength and modulus of 2.65 and 103 GPa, which increased by 182% and 84% compared to the homo BPDA-PDA fiber, respectively.展开更多
In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion pr...In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion properties of modified PBO fibers/epoxy composites. The results indicated that the contact angle decreased remarkably from 84.7 to 63.5 after 3 min O 2 /Ar plasma treatment. SEM and AFM images showed that the surface of the treated PBO fibers became rather rough. In addition, XPS results suggested that the polar functional group （O=C- O） was introduced on the surface of the treated PBO fiber. The interfacial adhesion test showed that the interfacial shear strength （IFSS） and the interlaminar shear strength （ILSS） increased significantly by 63.54% and 130%, respectively. Moreover, the excellent tensile property of the PBO fibres was well preserved.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 51903038 and 21975040)Guangdong Basic and Applied Basic Research Foundation (No. 2020A1515110897)。
文摘In this work, a fully rigid coplanar symmetric heterocyclic unit was introduced into the rigid polyimide macromolecular backbone structure to prepare high-performance polyimide fibers. The novel co-polyimide(co-PI) fibers based on 3,3',4,4'-biphenyltetracarboxylic anhydride(BPDA), p-phenylenediamine(PDA) and 2,6-(4,4'-diaminodiphenyl) benzo[1,2-d:5,4-d'] bisoxazole(PBOA) were fabricated via a twostep wet-spinning method. The effects of benzobisoxazole moiety on spinnability, aggregation structure, and mechanical properties of fibers were systematically discussed. The detailed structural analysis revealed that the well-defined aggregation structures of co-PI fibers were obtained from initial amorphous structure when post hot-drawing temperature was higher than 460 ℃ under proper drawing ratio, and the incorporation PBOA into BPDA-PDA structures produced more compact structural co-PI fiber than homo BPDA-PDA fiber. The BPDA-PDA/PBOA co-PI fibers exhibited optimum tensile strength and modulus of 2.65 and 103 GPa, which increased by 182% and 84% compared to the homo BPDA-PDA fiber, respectively.
基金supported by Shanghai Composite Company and partially by National Natural Science Foundation of China (No.10875146)
文摘In this work, the surface modification of poly （1, 4-phenylene-cis-benzobisoxazole） （PBO） fibers by O 2 /Ar coaxial atmospheric dielectric barrier discharge was investigated, as well as the interfacial adhesion properties of modified PBO fibers/epoxy composites. The results indicated that the contact angle decreased remarkably from 84.7 to 63.5 after 3 min O 2 /Ar plasma treatment. SEM and AFM images showed that the surface of the treated PBO fibers became rather rough. In addition, XPS results suggested that the polar functional group （O=C- O） was introduced on the surface of the treated PBO fiber. The interfacial adhesion test showed that the interfacial shear strength （IFSS） and the interlaminar shear strength （ILSS） increased significantly by 63.54% and 130%, respectively. Moreover, the excellent tensile property of the PBO fibres was well preserved.
