Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The...Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The relationships of wave transmitted and reflected among plate thickness, submergence and length are carefully studied by numerical simulation. It is shown that： （1） The transmitted coefficients of submerged horizontal plate or vertical plate will become larger with the increase of plate thickness and reduce rapidly with the decrease of plate submergence. （2） Both surface horizontal and vertical plate are efficient for intermediate and short wave elimination, but vertical plate is more effective. （3） Submerged horizontal plate can act more effectively than submerged vertical plate does. With all wave frequencies, the vertical plate almost has no wave elimination effect.展开更多
Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity fiel...Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity field around plate carefully. The flow field analysis shows that the interaction between incident wave and reverse flow caused by submerged plate will lead to the formation of wave elimination area around both sides of the plate. The velocity magnitude of flow field has been reduced and this is the main reason of wave elimination.展开更多
The interaction between wave and horizontal and vertical plates is investigated by the boundary element method, and the relations of wave exciting force with plate thickness, submergence and length are obtained. It is...The interaction between wave and horizontal and vertical plates is investigated by the boundary element method, and the relations of wave exciting force with plate thickness, submergence and length are obtained. It is found that： 1） The efficient wave exciting force exists while plate submergence is less than 0.5 m, and the plate is very thin with order O（0.005 m）. 2） The maximum heave wave exciting force exists, and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored. 3） The maximum sway wave exciting force exists, it is the main factor for surface or submerged vertical plate, and the roll force is about 20 times of horizontal plate.展开更多
Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate ty...Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate type breakwater(lower arc-shaped plate, single horizontal plate and double horizontal plate), this new type breakwater has been proved more effective. The wave exiting force, transmission and reflection coefficients are analyzed and discussed. In order to reveal the wave elimination mechanism of this type of breakwater, the velocity field around the breakwater is obtained. It is shown that:(1) The sway exciting force is minimal.(2) When the ratio of the submergence and wave amplitude is 0.05, the wave elimination effect will increase by 50% compared with other three types of breakwater.(3) The obvious backflow is found above the plate in the velocity field analysis.展开更多
Power generation using small temperature difference such as ocean thermal energy conversion(OTEC)and discharged thermal energy conversion(DTEC)is expected to be the countermeasures against global warming problem.As am...Power generation using small temperature difference such as ocean thermal energy conversion(OTEC)and discharged thermal energy conversion(DTEC)is expected to be the countermeasures against global warming problem.As ammonia and ammonia/water are used in evaporators for OTEC and DTEC as working fluids,the research of their local boiling heat transfer is important for improvement of the power generation efficiency.Measurements of local boiling heat transfer coefficients were performed for ammonia/water mixture(z=0.9-1)on a vertical flat plate heat exchanger in a range of mass flux(7.5-15 kg/m2s),heat flux(15-23 kW/m 2),and pressure(0.7-0.9 MPa).The result shows that in the case of ammonia/water mixture,the local heat transfer coefficients increase with an increase of mass flux and composition of ammonia,and decrease with an increase of heat flux.展开更多
From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental st...From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency.展开更多
Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-st...Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.展开更多
Based on the motion differential equations of vibration and acoustic coupling system for thin elastic spherical shell with an elastic plate attached to its internal surface,in which Dirac-δ functions are employed to ...Based on the motion differential equations of vibration and acoustic coupling system for thin elastic spherical shell with an elastic plate attached to its internal surface,in which Dirac-δ functions are employed to introduce the moments and forces applied by the attachment on the surface of shell,by means of expanding field quantities as Legendre series,a semi-analytic solution is derived for the vibration and acoustic radiation from a submerged stiffened spherical shell with a deck-type internal plate,which has a satisfactory computational effectiveness and precision for an arbitrary frequency range.It is easy to analyze the effect of the internal plate on the acoustic radiation field by using the formulas obtained by the method proposed.It is concluded that the internal plate can significantly change the mechanical and acoustic characteristics of shell,and give the coupling system a very rich resonance frequency spectrum.Moreover,the method can be used to study the acoustic radiation mechanism in similar structures as the one studied here.展开更多
Stroh-type formalisms for anisotropic thin plates in literature axe reviewed and discussed, and two kinds of hybrid Stroh-type formalisms axe compared. It is seen that the two Stroh-type formalisms are essentially equ...Stroh-type formalisms for anisotropic thin plates in literature axe reviewed and discussed, and two kinds of hybrid Stroh-type formalisms axe compared. It is seen that the two Stroh-type formalisms are essentially equivalent. With simple transfer relations, they can be expressed each other. In addition, with properly defined notation systems, the two Stroh-type formalisms can also be written in unified forms, which will be convenient in applications.展开更多
Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of ste...Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of steel plates fitted to make a grid pattern are used in this process,and an air-cooling device is separately installed inside the lower die.A finite element analysis (FEA) technique was developed,which included hot forming,air flow,cooling and thermal deformation analysis for the hot plate forming process using the cell-typed die.Further,the convective and interface heat transfer coefficients were used to reproduce analytically the effects of the cooling device in the hot plate forming analysis.A small-scale model test of the process was conducted to verify the FEA technique.The analysis results show that the curvature of the final plate agrees well with that of the designed experiment within a maximum relative error of 0.03% at the corner of the plate.展开更多
According to the basic idea of classical yin-yang complementarity and modern dual-complementarity, in a simple and unified way proposed by Luo（1987）, some uncon ventional Hamilton-type variational principles for dyn...According to the basic idea of classical yin-yang complementarity and modern dual-complementarity, in a simple and unified way proposed by Luo（1987）, some uncon ventional Hamilton-type variational principles for dynamics of Reissner sandwich plate can be established systematically. The unconventional Hamilton-type variation principle can fully characterize the initial boundary value problem of this dynamics. In this paper, an important integral relation is given, which can be considered as the generalized principle of virtual work in mechanics. Based on this relation, it is possible not only to obtain the principle of virtual work in dynamics of Reissner sandwich plate, but also to derive systematically the complementary functionals for fivefield, two-field and one-field unconventional Hamilton-type variational principles by the generalized Legender transformations. Furthermore, with this approach, the intrinsic relationship among the various principles can be explained clearly.展开更多
Background: complex proximal tibial fractures (Types V & VI of Schautzker classification) are the major problems in orthopedic surgery and associated with high complication rates. There are many alternatives in tr...Background: complex proximal tibial fractures (Types V & VI of Schautzker classification) are the major problems in orthopedic surgery and associated with high complication rates. There are many alternatives in treatment of these fractures. Aim: to evaluate the results of double plating with single anterior incision in complex proximal tibial fractures (Types V& VI of Schautzker classification).Methods and Materials: 22 patients (16 males and 6 females) with Types V and VI of Schautzker classification of proximal tibial fractures (14 cases were Type V and 8 cases were Type VI) were treated by double plating with single anterior incision method between May 2006 and May 2011. The bony and functional outcome was evaluated according to Knee Society Score. Results: According to Knee Society Score, the results were as follows: excellent in 19 patients (86.4%), good in 2 patients (9.1%), fair in 1 patient (4/5%), and poor in no patient (0%).Conclusion: the double plate fixation with single anterior incision is the best, effective and simple procedure in treatment of complex proximal tibial fractures (Types V and VI of Schautzker classification).展开更多
By introducing the Hamilton theory and algorithms into the problems of laminated composite plates andshells, the Hamiltion type generalized variational principle is established, and the Hamilton canonical equations an...By introducing the Hamilton theory and algorithms into the problems of laminated composite plates andshells, the Hamiltion type generalized variational principle is established, and the Hamilton canonical equations andthe boundary conditions for the static and elastoplastic analysis of composite plates are presented. With thetransformation of phase variables, the Hamilton canonical equations and their boundary conditions for thecylindrical shells and doubly curved shells in the curvilinear coordinate are given.展开更多
This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputteri...This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputtering technology AL-N/AL. this design conduct heat through aluminum material which can reduce the cost meanwhile conduct heat effectively. To ensure the quality of the water at the same time improve the utilization rate of solar energy, this design use phase change for second heat exchange. Take Shanghai for example, where this design and heat transfer model are applied, the average efficiency of water heaters can achieve 68%, which has proven the feasibility of the design. In a word, this design can achieve the goal of energy conservation and emissions reduction and has broad market prospects.展开更多
Ball-drop fracturing is a kind of technology that is commonly used for multistage fracturing of shale gas horizontal wells.At present,the ball injector cannot satisfy the operation demands of large bore and small spac...Ball-drop fracturing is a kind of technology that is commonly used for multistage fracturing of shale gas horizontal wells.At present,the ball injector cannot satisfy the operation demands of large bore and small spacing fracturing of shale gas wells due to its disadvantages,such as a small size of fracturing ball,a limited number of balls,complicated structure and poor applicability.In this paper,a new type of automatic ball injector with rotating plate and large bore was designed.There is a ball storage at the upper part of the ball injector and a ball injecting mechanism inside the pedestal at the lower part.And the ball injecting mechanism is controlled by the drive motor to inject the balls one by one.Then,collision analysis was carried out on its ball injecting process by using finite element method(FEM).Finally,simulation and prototype tests were conducted by using the arbitrary Lagrangian-Eulerian(ALE)mesh adaption method and the coupled smoothed particle hydrodynamics method(FEM-SPH).And the following research results were obtained.First,in the process of ball collision,the maximum equivalent stress,equivalent plastic strain and displacement are generated at the edge of the rotating plate.The maximum stress is about 600 MPa,which is less than the yield strength of 42CrMo(930 MPa),so the strength requirement is satisfied with a certain safety margin.Second,the prototype successfully passes the continuous ball injecting test of 12-stage fracturing process with the ball diameter of 64-108 mm and the ball contrast of 4 mm.In conclusion,this automatic ball injector with rotating plate and large bore is advantageous with simple operation and wide applicability and can effectively address the needs of multistage fracturing of shale gas horizontal wells.展开更多
基金supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, Ministry of Education of China (Grant No. 2007[24])supported by Science and Technology Project of Dalian (Grant No. 2008A16GX248)
文摘Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The relationships of wave transmitted and reflected among plate thickness, submergence and length are carefully studied by numerical simulation. It is shown that： （1） The transmitted coefficients of submerged horizontal plate or vertical plate will become larger with the increase of plate thickness and reduce rapidly with the decrease of plate submergence. （2） Both surface horizontal and vertical plate are efficient for intermediate and short wave elimination, but vertical plate is more effective. （3） Submerged horizontal plate can act more effectively than submerged vertical plate does. With all wave frequencies, the vertical plate almost has no wave elimination effect.
基金supported by the Fundamental Research Funds for the Dalian University of Technology(Grant No.DUT10LK43)the National Key Basic Research Program of China(Grant No.2013CB036101)
文摘Submerged horizontal plate can be considered as a new concept breakwater. In order to reveal the wave elimination mechanism of this type breakwater, boundary element method is utilized to investigate the velocity field around plate carefully. The flow field analysis shows that the interaction between incident wave and reverse flow caused by submerged plate will lead to the formation of wave elimination area around both sides of the plate. The velocity magnitude of flow field has been reduced and this is the main reason of wave elimination.
基金supported by Foundation of Science and Technology of Dalian (Grant No. 2008A16GX248)
文摘The interaction between wave and horizontal and vertical plates is investigated by the boundary element method, and the relations of wave exciting force with plate thickness, submergence and length are obtained. It is found that： 1） The efficient wave exciting force exists while plate submergence is less than 0.5 m, and the plate is very thin with order O（0.005 m）. 2） The maximum heave wave exciting force exists, and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored. 3） The maximum sway wave exciting force exists, it is the main factor for surface or submerged vertical plate, and the roll force is about 20 times of horizontal plate.
基金financially supported by the National Key Basic Research Program of China(Grant No.2013CB036101)the National Natural Science Foundation of China(Grant No.11702054)
文摘Based on the wave radiation and diffraction theory, this paper investigates a new type breakwater with upper arcshaped plate by using the boundary element method(BEM). By comparing with other three designs of plate type breakwater(lower arc-shaped plate, single horizontal plate and double horizontal plate), this new type breakwater has been proved more effective. The wave exiting force, transmission and reflection coefficients are analyzed and discussed. In order to reveal the wave elimination mechanism of this type of breakwater, the velocity field around the breakwater is obtained. It is shown that:(1) The sway exciting force is minimal.(2) When the ratio of the submergence and wave amplitude is 0.05, the wave elimination effect will increase by 50% compared with other three types of breakwater.(3) The obvious backflow is found above the plate in the velocity field analysis.
基金supported by the fund for the 21st Century Center of Excellence program(Advanced Science and Technology for Utilization of Ocean Energy)
文摘Power generation using small temperature difference such as ocean thermal energy conversion(OTEC)and discharged thermal energy conversion(DTEC)is expected to be the countermeasures against global warming problem.As ammonia and ammonia/water are used in evaporators for OTEC and DTEC as working fluids,the research of their local boiling heat transfer is important for improvement of the power generation efficiency.Measurements of local boiling heat transfer coefficients were performed for ammonia/water mixture(z=0.9-1)on a vertical flat plate heat exchanger in a range of mass flux(7.5-15 kg/m2s),heat flux(15-23 kW/m 2),and pressure(0.7-0.9 MPa).The result shows that in the case of ammonia/water mixture,the local heat transfer coefficients increase with an increase of mass flux and composition of ammonia,and decrease with an increase of heat flux.
基金This project is supported by National Natural Science Foundation of China (No.50175011).
文摘From the general formula for calculating the efficiency of planetary geartrains, the efficiency of the double crank ring-plate-type pin-cycloidal gear planetary drive isderived. To prove the theory, an experimental study has been conducted. The tested value of theefficiency of a sample set of the new-type drive in the experiment agrees with the calculated one.It shows that the new-type drive is of not merely high bearing capacity, but also quite highefficiency.
文摘Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.
基金Project supported by the National Natural Science Foundation of China(No.10172038).
文摘Based on the motion differential equations of vibration and acoustic coupling system for thin elastic spherical shell with an elastic plate attached to its internal surface,in which Dirac-δ functions are employed to introduce the moments and forces applied by the attachment on the surface of shell,by means of expanding field quantities as Legendre series,a semi-analytic solution is derived for the vibration and acoustic radiation from a submerged stiffened spherical shell with a deck-type internal plate,which has a satisfactory computational effectiveness and precision for an arbitrary frequency range.It is easy to analyze the effect of the internal plate on the acoustic radiation field by using the formulas obtained by the method proposed.It is concluded that the internal plate can significantly change the mechanical and acoustic characteristics of shell,and give the coupling system a very rich resonance frequency spectrum.Moreover,the method can be used to study the acoustic radiation mechanism in similar structures as the one studied here.
基金Project supported by the National Natural Science Foundation of China (No.10102019).
文摘Stroh-type formalisms for anisotropic thin plates in literature axe reviewed and discussed, and two kinds of hybrid Stroh-type formalisms axe compared. It is seen that the two Stroh-type formalisms are essentially equivalent. With simple transfer relations, they can be expressed each other. In addition, with properly defined notation systems, the two Stroh-type formalisms can also be written in unified forms, which will be convenient in applications.
基金Project(2010-0008-277)supported by the NCRC(National Core Research Center)Program through the National Research Foundation of Korea,funded by the Ministry of Education,Science,and TechnologyProject supported by R&D for Technology Development Program of Ministry of Knowledge Economy,Korea
文摘Hot plate forming using a cell-typed die is a process for forming a large thick plate with a spherical shape for the manufacture of a large spherical LNG tank.Cell-typed upper and lower dies made of a framework of steel plates fitted to make a grid pattern are used in this process,and an air-cooling device is separately installed inside the lower die.A finite element analysis (FEA) technique was developed,which included hot forming,air flow,cooling and thermal deformation analysis for the hot plate forming process using the cell-typed die.Further,the convective and interface heat transfer coefficients were used to reproduce analytically the effects of the cooling device in the hot plate forming analysis.A small-scale model test of the process was conducted to verify the FEA technique.The analysis results show that the curvature of the final plate agrees well with that of the designed experiment within a maximum relative error of 0.03% at the corner of the plate.
基金Project supported by the National Natural Science Foundation of China(No.10172097)the Doctoral Foundation of Ministry of Education of China(No.20030558025)
文摘According to the basic idea of classical yin-yang complementarity and modern dual-complementarity, in a simple and unified way proposed by Luo（1987）, some uncon ventional Hamilton-type variational principles for dynamics of Reissner sandwich plate can be established systematically. The unconventional Hamilton-type variation principle can fully characterize the initial boundary value problem of this dynamics. In this paper, an important integral relation is given, which can be considered as the generalized principle of virtual work in mechanics. Based on this relation, it is possible not only to obtain the principle of virtual work in dynamics of Reissner sandwich plate, but also to derive systematically the complementary functionals for fivefield, two-field and one-field unconventional Hamilton-type variational principles by the generalized Legender transformations. Furthermore, with this approach, the intrinsic relationship among the various principles can be explained clearly.
文摘Background: complex proximal tibial fractures (Types V & VI of Schautzker classification) are the major problems in orthopedic surgery and associated with high complication rates. There are many alternatives in treatment of these fractures. Aim: to evaluate the results of double plating with single anterior incision in complex proximal tibial fractures (Types V& VI of Schautzker classification).Methods and Materials: 22 patients (16 males and 6 females) with Types V and VI of Schautzker classification of proximal tibial fractures (14 cases were Type V and 8 cases were Type VI) were treated by double plating with single anterior incision method between May 2006 and May 2011. The bony and functional outcome was evaluated according to Knee Society Score. Results: According to Knee Society Score, the results were as follows: excellent in 19 patients (86.4%), good in 2 patients (9.1%), fair in 1 patient (4/5%), and poor in no patient (0%).Conclusion: the double plate fixation with single anterior incision is the best, effective and simple procedure in treatment of complex proximal tibial fractures (Types V and VI of Schautzker classification).
文摘By introducing the Hamilton theory and algorithms into the problems of laminated composite plates andshells, the Hamiltion type generalized variational principle is established, and the Hamilton canonical equations andthe boundary conditions for the static and elastoplastic analysis of composite plates are presented. With thetransformation of phase variables, the Hamilton canonical equations and their boundary conditions for thecylindrical shells and doubly curved shells in the curvilinear coordinate are given.
文摘This is an improved design based on the existing plate type solar water heaters. It aims at making full use of solar energy. To fully absorb radiation, it absorbs coating selectively by adopting the magnetron sputtering technology AL-N/AL. this design conduct heat through aluminum material which can reduce the cost meanwhile conduct heat effectively. To ensure the quality of the water at the same time improve the utilization rate of solar energy, this design use phase change for second heat exchange. Take Shanghai for example, where this design and heat transfer model are applied, the average efficiency of water heaters can achieve 68%, which has proven the feasibility of the design. In a word, this design can achieve the goal of energy conservation and emissions reduction and has broad market prospects.
基金supported by the National Major Science and Technology Project“Study on coalbed methane recovery equipment and technologies”(No.2016ZX05042-004)Graduate Student Innovation Project Funding Project“Study on the design of pneumatic technologies and equipment for unloading liquids and producing gas through a preset pipe string”(No.YCX2018058).
文摘Ball-drop fracturing is a kind of technology that is commonly used for multistage fracturing of shale gas horizontal wells.At present,the ball injector cannot satisfy the operation demands of large bore and small spacing fracturing of shale gas wells due to its disadvantages,such as a small size of fracturing ball,a limited number of balls,complicated structure and poor applicability.In this paper,a new type of automatic ball injector with rotating plate and large bore was designed.There is a ball storage at the upper part of the ball injector and a ball injecting mechanism inside the pedestal at the lower part.And the ball injecting mechanism is controlled by the drive motor to inject the balls one by one.Then,collision analysis was carried out on its ball injecting process by using finite element method(FEM).Finally,simulation and prototype tests were conducted by using the arbitrary Lagrangian-Eulerian(ALE)mesh adaption method and the coupled smoothed particle hydrodynamics method(FEM-SPH).And the following research results were obtained.First,in the process of ball collision,the maximum equivalent stress,equivalent plastic strain and displacement are generated at the edge of the rotating plate.The maximum stress is about 600 MPa,which is less than the yield strength of 42CrMo(930 MPa),so the strength requirement is satisfied with a certain safety margin.Second,the prototype successfully passes the continuous ball injecting test of 12-stage fracturing process with the ball diameter of 64-108 mm and the ball contrast of 4 mm.In conclusion,this automatic ball injector with rotating plate and large bore is advantageous with simple operation and wide applicability and can effectively address the needs of multistage fracturing of shale gas horizontal wells.
