As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-su...As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-support rigid plate(FERP) structure is presented to describe the catastrophic isolation system. Based on the newly-established structure, theoretical derivation for stiffness matrix calculation by free response(SMCby FR) and the method of stiffness identification by stiffness matrix disassembly(SIby SMD)are proposed. By integrating the SMCby FR and the SIby SMD and defining the stiffness assurance criterion(SAC), the procedures for stiffness identification of a FERP structure(SIFERP) are summarized. Then, a numerical example is adopted for the SIFERP validation, in which the simulated tested free response data are generated by the numerical methods, and operation for filtering noise is conducted to imitate the practical application. Results in the numerical example demonstrate the feasibility and accuracy of the developed SIFERP for stiffness identification.展开更多
MEMS gyroscopes are widely used in the underwater vehicles owing to their excellent performance and affordable costs.However,the temperature sensitivity of the sensor seriously affects measurement accuracy.Therefore,i...MEMS gyroscopes are widely used in the underwater vehicles owing to their excellent performance and affordable costs.However,the temperature sensitivity of the sensor seriously affects measurement accuracy.Therefore,it is significantly to accurately identify the temperature compensation model in this paper,the calibration parameters were first extracted by using the fast calibration algorithm based on the Persistent Excitation Signal Criterion,and then,MEMS gyro temperature compensation model was established by utilizing the thin plate spline interpolation method,and the corresponding identification results were compared with the results from the polynomial fitting method.The effectiveness of the proposed algorithm has been validated through the comparative experiment.展开更多
The admittance features representing the physical attributes are used as the in termediates to extract the materialattributesrelated impact sound features of ribbed plates. Firstly, the admittance feature representati...The admittance features representing the physical attributes are used as the in termediates to extract the materialattributesrelated impact sound features of ribbed plates. Firstly, the admittance feature representations of metal ribbed plates attributes are obtained and the relationship between the admittance features and the impact sound features are established via correlation analysis method. Then, materialattributesrelated impact sound features are obtained indirectly. Finally, the performances of different sound features for the material recognition of ribbedmetal plates are verified through the Support Vector Machine classifier. The results indicate that the obtained four sets of features can effectively identify the materials of the metal ribbed plates, while the accuracy of a single feature depends on the separable degree of the corresponding material attribute. And the features extracted based on admittance functions have higher average accuracy than that of timbre features. Therefore, the proposed sound feature extraction method based on admittance features is valid, and the extracted sound features can effectively reflect the physical attributes.展开更多
基金Project(51221462)supported by the National Natural Science Foundation of ChinaProject(20120095110001)supported by the PhD Programs Foundation of Ministry of Education of ChinaProject(CXZZ13_0927)supported by Research and Innovation Project for College Graduates of Jiangsu Province,China
文摘As the stiffness of the elastic support varies with the physical-chemical erosion and mechanical friction, model catastrophe of a single degree-of-freedom(DOF) isolation system may occur. A 3-DOF four-point-elastic-support rigid plate(FERP) structure is presented to describe the catastrophic isolation system. Based on the newly-established structure, theoretical derivation for stiffness matrix calculation by free response(SMCby FR) and the method of stiffness identification by stiffness matrix disassembly(SIby SMD)are proposed. By integrating the SMCby FR and the SIby SMD and defining the stiffness assurance criterion(SAC), the procedures for stiffness identification of a FERP structure(SIFERP) are summarized. Then, a numerical example is adopted for the SIFERP validation, in which the simulated tested free response data are generated by the numerical methods, and operation for filtering noise is conducted to imitate the practical application. Results in the numerical example demonstrate the feasibility and accuracy of the developed SIFERP for stiffness identification.
文摘MEMS gyroscopes are widely used in the underwater vehicles owing to their excellent performance and affordable costs.However,the temperature sensitivity of the sensor seriously affects measurement accuracy.Therefore,it is significantly to accurately identify the temperature compensation model in this paper,the calibration parameters were first extracted by using the fast calibration algorithm based on the Persistent Excitation Signal Criterion,and then,MEMS gyro temperature compensation model was established by utilizing the thin plate spline interpolation method,and the corresponding identification results were compared with the results from the polynomial fitting method.The effectiveness of the proposed algorithm has been validated through the comparative experiment.
基金supported by the National Natural Science Foundation of China(11574249)the Aeronautical Science Foundation of China(20131553018)
文摘The admittance features representing the physical attributes are used as the in termediates to extract the materialattributesrelated impact sound features of ribbed plates. Firstly, the admittance feature representations of metal ribbed plates attributes are obtained and the relationship between the admittance features and the impact sound features are established via correlation analysis method. Then, materialattributesrelated impact sound features are obtained indirectly. Finally, the performances of different sound features for the material recognition of ribbedmetal plates are verified through the Support Vector Machine classifier. The results indicate that the obtained four sets of features can effectively identify the materials of the metal ribbed plates, while the accuracy of a single feature depends on the separable degree of the corresponding material attribute. And the features extracted based on admittance functions have higher average accuracy than that of timbre features. Therefore, the proposed sound feature extraction method based on admittance features is valid, and the extracted sound features can effectively reflect the physical attributes.
