Introduction The predominant characteristics of high-altitude climates include low air pressure,low humidity,and large diurnal temperature fluctuations.In practical engineering scenarios in high-altitude regions,many ...Introduction The predominant characteristics of high-altitude climates include low air pressure,low humidity,and large diurnal temperature fluctuations.In practical engineering scenarios in high-altitude regions,many pier surface cracks only appear several months after erection,and cyclic thermal stress is identified as the main trigger for such cracking.The thermal stress in concrete structures has been investigated for decades but remains incompletely understood.Structural engineers typically regard concrete as an isotropic material and calculate the thermal stress using code-specified coefficients of thermal expansion(CTEs)along with temperature conditions and constraints.Because the CTE of hardened cement paste is more than twice that of many aggregates,reducing the CTE of coarse aggregates can further exacerbate the thermal deformation incompatibility between the coarse aggregate and mortar matrix.In this paper,a comprehensive thermal-elastic mechanics model for pier concrete was developed to analysis the temperature-induced surface stress.Methods A series of mechanical and thermophysical tests were conducted on the diorite aggregate,ITZ cement paste,and mortar,and concrete.A test pier was constructed on open ground near the Yarlung Zangbo River at an altitude of 3800 m.The pier had a diameter of 1.8 m and height of 2 m.Temperature sensors were embedded in the cross-section at a height of 1 m,positioned along the southnorth and east-west directions.The embedding depths(distances from the pier surface)were 0,1.5,3,4.5,6,7.5,9,12,15,20,25,30,35,40,50,60,70,80 cm,and 90 cm.A model of the bridge pier concrete for surface-level analysis was constructed.The model consists of a concrete unit formed as a sphere-shell-shell composite,including the aggregate,ITZ,and mortar layers,embedded in the surface layer of a bridge pier.Outside this unit,the pier concrete was treated as an isotropic,homogeneous elastic material.The real-time internal temperature fields of high-altitude concrete bridge piers,measured on-site,were incorporated into the model.By applying thermoelastic mechanics theory and finite element solutions for plane strain problems,the three-dimensional thermal stresses on the surface layer of high-altitude bridge piers were analyzed Results and discussion During the experimental period,the lowest and highest temperatures on the bridge pier in the high-altitude region were 9.6 ℃ and 42.6 ℃,respectively.These occurred before sunrise and sunset on sunny days,respectively,corresponding to the local maximum temperature gradients during the surface heating and cooling stages,as well as the maximum temperature difference between the surface and center during these stages.The thermal stress on the pier concrete surface was obtained by superimposing the stresses caused by the uneven distribution of the internal temperature field and those caused by the incompatible thermal deformation among the different components in the surface concrete Before the erection of the upper structures,the absolute values of the tangential and vertical stresses were the same;therefore,only one curve was observed.From 22:00 to 8:00,the pier concrete surface was in tension,whereas from 11:00 to 22:00,the pier concrete surface was in compression.The surface of the pier concrete was subjected to biaxial forces of equal magnitude with a maximum compressive stress of 12.52 MPa and maximum tensile stress of 2.15 MPa,respectively at 18:00 and 8:00.According to the fatigue equation,the concrete was predicted to crack after 21 d of temperature cycling.Moreover,if humidity-induced stress is added on top of this,the tensile stress may approach or even exceed the concrete's tensile strength,thereby posing a significant risk of cracking.After the erection of upper structures,the tangential and vertical stresses no longer coincide because the upper structures have been erected.The curve of the tangential stress is unchanged,whereas the curve of the vertical stress is translated downwards by 1.57 MPa due to the structural deadweight.Therefore,the maximum tangential compressive stress remained 12.52 MPa,whereas the maximum vertical compressive stress increased to 14.09 MPa.Additionally,the maximum tangential tensile stress was 2.15 MPa,and the maximum vertical tensile stress was 0.58 MPa.According to Appendix C of GB/T 50010 and the fatigue equation,stresses are unlikely to cause cracking of the pier concrete surface.Although a higher CTE of the coarse aggregate slightly increased the maximum compressive stress,the differences among the three groups of concrete were minimal and could be ignored.Specifically,the maximum compressive stresses on the pier concrete surface were 12.54,12.45 MPa,and 12.56 MPa when using diorite,limestone,and basalt,respectively.By contrast,a lower CTE of the coarse aggregate results in a greater maximum tensile stress on the pier concrete surface.For example,when using limestone,which has a low CTE,the maximum tensile stress on the pier concrete surface is 2.28 MPa,compared to 2.17 MPa when using diorite and 2.14 MPa when using basalt.The finite element simulation results indicated that the maximum compressive stress on the pier concrete surface was 11.72 MPa,whereas the maximum tensile stress was 2.10 MPa.These results are approximately consistent with the theoretical calculations.This consistency provides mutual verification.Conclusions Surface cracking in pier concrete occurs predominantly before the erection of upper structures.Under sunny conditions,the orthogonal decomposition of the superficial stress revealed that the maximum compressive stress during the day was approximately 12.52 MPa,whereas the maximum tensile stress was approximately 2.15 MPa.This tensile stress approached the tensile strength of the C35 concrete under biaxial tension.The risk of cracking increased significantly when humidity-induced stress was considered.After the erection of upper structures,the maximum tangential tensile stress on the pier surface remained at 2.15 MPa while the maximum vertical stress decreased to 0.58 MPa,both of which are well below the tensile strength of C35 concrete under biaxial tension.Although the use of coarse aggregates with a lower coefficient of thermal expansion reduced the tensile stress induced by temperature gradients,it increased the stress owing to material deformation incompatibility,leading to a slight increase in the maximum tensile stress on the pier concrete surface.展开更多
Bridge pier failures from granular flow impacts are common.Installing defense piles upstream is an effective mitigation strategy,yet their protective mechanisms and standardized design guidelines are unclear.This stud...Bridge pier failures from granular flow impacts are common.Installing defense piles upstream is an effective mitigation strategy,yet their protective mechanisms and standardized design guidelines are unclear.This study employed 3D discrete element method to analyze the influence of defense pile size and placement on its performance across 219 scenarios,providing a detailed examination of their protective mechanisms.Results show that optimizing these factors can reduce the maximum impact force on bridge piers by up to 94%.In terms of size,a critical height threshold is identified,beyond which increasing pile height does not enhance protection.This threshold depends on the movement height of granular particles at the slope base.Protection effectiveness varies with pile size:when H≤0.05 h(H is the height of defense piles,h is the height of bridge),protection marginally improves with increasing height and diameter;for 0.05 h<H<0.15 h,protection strongly correlates with both parameters;for H≥0.15 h,diameter becomes the dominant factor.In terms of placement,an optimal longitudinal distance exists between the defense pile and the bridge pier.The larger the diameter,the greater the optimal longitudinal distance.However,the transverse distance is inversely related to protection effectiveness.Mechanistic analysis shows that defense piles are more effective at redirecting particles to prevent direct collisions with the pier(contributing 100%impact energy reduction before the non-dimensional travel time t*=7.01 and 63%–100%afterward)than at reducing particle velocity.This study provides insights into the protective mechanisms of defense piles and informs strategies for optimizing bridge pier protection in granular flow-prone regions.展开更多
Here,a seismic-response analysis model was proposed for evaluating the nonlinear seismic response of a pile-supported bridge pier under frozen and thawed soil conditions.The effect of a seasonally frozen soil layer on...Here,a seismic-response analysis model was proposed for evaluating the nonlinear seismic response of a pile-supported bridge pier under frozen and thawed soil conditions.The effect of a seasonally frozen soil layer on the seismic vulnerability of a pile-supported bridge pier was evaluated based on reliability theory.Although the frozen soil layer inhibited the seismic response of the ground surface to a certain extent,it exacerbated the acceleration response at the bridge pier top owing to the low radiation damping effect of the frozen soil layer.Furthermore,the frozen soil layer reduced the lateral displacement of the bridge pier top relative to the ground surface by approximately 80%,thereby preventing damage caused by earthquakes,such as falling girders.Compared to the thawed state of the ground surface,the bending moment of the bridge pier in frozen ground increases.However,the bending moment of the pile foundation in frozen ground decreases,thereby lessening the seismic vulnerability of the bridge pile foundation.The results of this can provide a reference for the seismic response analysis and seismic risk assessment of pile-supported bridges in seasonally frozen regions.展开更多
To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier s...To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier structure configuration and the mechanism of local damage formation.Integrating the DTC into the PASP,numerical models of a previous experimental reference PASP and a PASP with damage transfer configuration(DTPASP)were established using the finite element software ABAQUS with a concrete damage plasticity(CDP)model.The models were then compared with experimental results regarding damage distribution,hysteresis curves,energy dissipation capacity,the joint opening degree,and residual displacement.The findings indicate that the finite element model developed in this study can well reflect the experimental results of the reference PASP.The incorporation of the DTC proved to be beneficial in preserving structural integrity,bearing capacity,and the functionality of the core structure of bridge piers following an earthquake.Meanwhile,this addition did not exert a significant influence on the seismic behavior of the core structure of the bridge pier.展开更多
In this study, three rapid repair techniques are proposed to retrofit circular bridge piers that are severely damaged by the flexural failure mode in major earthquakes. The quasi-static tests on three 1：2.5 scaled ci...In this study, three rapid repair techniques are proposed to retrofit circular bridge piers that are severely damaged by the flexural failure mode in major earthquakes. The quasi-static tests on three 1：2.5 scaled circular pier specimens are conducted to evaluate the efficiency of the proposed repair techniques. For the purpose of rapid repair, the repair procedure for all the specimens is conducted within four days, and the behavior of the repaired specimens is evaluated and compared with the original ones. A finite element model is developed to predict the cyclic behavior of the repaired specimens and the numerical results are compared with the test data. It is found that all the repaired specimens exhibit similar or larger lateral strength and deformation capacity than the original ones. The initial lateral stiffness of all the repaired specimens is lower than that of the original ones, while they show a higher lateral stiffness at the later stage of the test. No noticeable difference is observed for the energy dissipation capacity between the original and repaired pier specimens. It is suggested that the repair technique using the early-strength concrete jacket confined by carbon fiber reinforced polymer （CFRP） sheets can be an optimal method for the rapid repair of severely earthquake-damaged circular bridge piers with flexural failure mode.展开更多
Local scour around a bridge pier is an important parameter for the design of a bridge. Compared with the local scour in a mono-directional current, the local scour in a tidal current has its unique characteristics. In...Local scour around a bridge pier is an important parameter for the design of a bridge. Compared with the local scour in a mono-directional current, the local scour in a tidal current has its unique characteristics. In this paper, several aspects of local scour around bridge piers in tidal current, including the scour development process, the plane form of a scour hole and the maximum scour depth, are studied through movable bed flume experiments.展开更多
In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） anal...In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures.展开更多
An experimental study was conducted to investigate the feasibility of a proposed rapid repair technique for severely earthquake-damaged bridge piers with flexural-shear failure mode. Six circular pier specimens were f...An experimental study was conducted to investigate the feasibility of a proposed rapid repair technique for severely earthquake-damaged bridge piers with flexural-shear failure mode. Six circular pier specimens were first tested to severe damage in flexural-shear mode and repaired using early-strength concrete with high-fluidity and carbon fiber reinforced polymers （CFRP）. After about four days, the repaired specimens were tested to failure again. The seismic behavior of the repaired specimens was evaluated and compared to the original specimens. Test results indicate that the proposed repair technique is highly effective. Both shear strength and lateral displacement of the repaired piers increased when compared to the original specimens, and the failure mechanism of the piers shifted from flexural-shear failure to ductile flexural failure. Finally, a simple design model based on the Seible formulation for post-earthquake repair design was compared to the experimental results. It is concluded that the design equation for bridge pier strengthening before an earthquake could be applicable to seismic repairs after an earthquake if the shear strength contribution of the spiral bars in the repaired piers is disregarded and 1.5 times more FRP sheets is provided.展开更多
In order to predict the local scour hole and its evaluation around a cylindrical bridge pier, the computational fluid dynamics （CFD） and theories of sediment movement and transport were employed to carry out numeric...In order to predict the local scour hole and its evaluation around a cylindrical bridge pier, the computational fluid dynamics （CFD） and theories of sediment movement and transport were employed to carry out numerical simulations. In the numerical method, the time-averaged Reynolds Navier-Stokes equations and the standard k-e model were first used to simulate the three-dimensional flow field around a bridge pier fixed on river bed. The transient shear stress on river bed was treated as a crucial hydrodynamic mechanism when handling sediment incipience and transport. Then, river-bed volumetric sediment transport was calculated, followed by the modification of the river bed altitude and configuration. Boundary adaptive mesh technique was employed to modify the grid system with changed river-bed boundary. The evolution of local scour around a cylindrical bridge pier was presented. The numerical results represent the flow pattern and mechanism during the pier scouring, with a good prediction of the maximum scour hole depth compared with test results.展开更多
In this work, experimental investigations have been pursued to analyse the influence of downward seepage on the turbulent characteristics of flow and corresponding changes in vortex structure around circular bridge pi...In this work, experimental investigations have been pursued to analyse the influence of downward seepage on the turbulent characteristics of flow and corresponding changes in vortex structure around circular bridge pier in alluvial channel. Experiments were conducted in sand bed channel with circular piers of different sizes for no seepage, 10% seepage and 20% seepage cases. The measurement of turbulent flow statistics such as velocity and Reynolds stresses is found to be negative within the scour hole at upstream of the pier whereas application of downward seepage retards the reversal of the flow causing a decrement in the velocity and Reynolds stresses. Higher Reynolds shear stress prevails at the downstream side because of the production of wake vortices. Contribution of all bursting events to the total Reynolds shear stress production has been observed to increase with downward seepage. The analysis of integral scale suggest that size of eddies increases with seepage, which is responsible for increase in particle mobility. Initially rate of scouring is more which abatements gradually with expanding time as well as with the increased of downward seepage. Presence of downward seepage reduces the depth and length of vortex and shifts towards downstream side of the pier.展开更多
At present, the method of calculating the turbulent flow width around the bridge pier is not given in the ＂Standard for Inland River Navigation＂ （GB50139-2004） in China, and the bridge designer usually increases t...At present, the method of calculating the turbulent flow width around the bridge pier is not given in the ＂Standard for Inland River Navigation＂ （GB50139-2004） in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouting around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.展开更多
The deterioration of the performance of offshore bridges is particularly prominent due to the complex natural environment,including the coupling effects of earthquake and seawater erosion.In particular,bridge piers ar...The deterioration of the performance of offshore bridges is particularly prominent due to the complex natural environment,including the coupling effects of earthquake and seawater erosion.In particular,bridge piers are the main energy-consuming and load-bearing components,so that excellent seismic capacity of bridge piers is the key to avoiding bridge damage.Although earthquake resistant behavior of ordinary reinforced concrete bridge piers(ordinary pier)can be improved by increasing the section size and reinforcement ratio of piers,the improvement of the earthquake resistant behavior is limited.To further improve the earthquake resistant behavior of bridge piers,high-tensile reinforcement engineered cementitious composite(ECC)bridge piers are utilized and time-varying seismic fragility analysis are conducted in this study.The refined model of a bridge pier is built by OpenSees.First,the influence of ECC replacement height on pier curvature is analyzed to determine the reasonable ECC height.Then,the time-varying fragility analysis of high-tensile reinforcement ECC piers(ECC composite piers)with durability damage are evaluated considering the time-varying law of materials.Four damage states,slight damage,moderate damage,extensive damage and complete collapse,are utilized in the study.These fragility curves indicate the durability damage can debase the earthquake resistant behavior of piers continually,the exceedance probability of the same state of destruction increases with the increase of peak ground acceleration(PGA)and service time of pier.The results also indicate that the corrosion level of chloride ion to pier is small during the early service period,and the bridge pier vulnerable curve is similar to that of the new bridge pier.As the level of chlorine ion corrosion deepens,transcendental probability is increased.Compared with the ordinary pier,the exceedance probability in each limit state of ECC composite piers is significantly reduced.The proposed ECC composite pies leads to better realistic time-varying earthquake resistant behavior.展开更多
Reinforcement corrosion is the main cause of performance deterioration of reinforced concrete(RC)structures.Limited research has been performed to investigate the life-cycle cost(LCC)of coastal bridge piers with nonun...Reinforcement corrosion is the main cause of performance deterioration of reinforced concrete(RC)structures.Limited research has been performed to investigate the life-cycle cost(LCC)of coastal bridge piers with nonuniform corrosion using different materials.In this study,a reliability-based design optimization(RBDO)procedure is improved for the design of coastal bridge piers using six groups of commonly used materials,i.e.,normal performance concrete(NPC)with black steel(BS)rebar,high strength steel(HSS)rebar,epoxy coated(EC)rebar,and stainless steel(SS)rebar(named NPC-BS,NPC-HSS,NPC-EC,and NPC-SS,respectively),NPC with BS with silane soakage on the pier surface(named NPC-Silane),and high-performance concrete(HPC)with BS rebar(named HPC-BS).First,the RBDO procedure is improved for the design optimization of coastal bridge piers,and a bridge is selected to illustrate the procedure.Then,reliability analysis of the pier designed with each group of materials is carried out to obtain the time-dependent reliability in terms of the ultimate and serviceability performances.Next,the repair time of the pier is predicted based on the time-dependent reliability indices.Finally,the time-dependent LCCs for the pier are obtained for the selection of the optimal design.展开更多
In order to study bearing characteristics of bridge pile at steep slope under complex loads in mountians, according to double pile-column bridge piers engineering at steep slope and test models in laboratory, finite e...In order to study bearing characteristics of bridge pile at steep slope under complex loads in mountians, according to double pile-column bridge piers engineering at steep slope and test models in laboratory, finite element analysis of pile-column bridge piers was carried out using software ADINA under different loadings, such as horizontal loading in the longitudinal direction along bridge, vertical loadings, slope top loadings and complex loadings. The numerical simulation results show that displacements of front pile pier top and back pile pier top are different under horizontal loadings in the longitudinal direction along bridge or vertical loadings, the displacements of front pile pier top are higher than those of back pile pier top, and its difference increases with the increase of loadings. Vertical displacements will also appear under slope top loadings, and displacements of front pier top are higher than those of back pier top too, while its difference reduces with the increase of loadings. Displacements of both front pile pier top and back pile pier top under comlex loading are larger than those under single loading.展开更多
This paper describes one approach to the design of reinforced concrete (RC) bridge piers, using a three-hybrid multi- objective simulated annealing (SA) algorithm with a neighborhood move based on the mutation operato...This paper describes one approach to the design of reinforced concrete (RC) bridge piers, using a three-hybrid multi- objective simulated annealing (SA) algorithm with a neighborhood move based on the mutation operator from the genetic algorithms (GAs), namely MOSAMO1, MOSAMO2 and MOSAMO3. The procedure is applied to three objective functions: the economic cost, the reinforcing steel congestion and the embedded CO 2 emissions. Additional results for a random walk and a descent local search multi-objective algorithm are presented. The evaluation of solutions follows the Spanish Code for structural concrete. The methodology was applied to a typical bridge pier of 23.97 m in height. This example involved 110 design variables. Results indicate that algorithm MOSAMO2 outperforms other algorithms regarding the definition of Pareto fronts. Further, the proposed procedure will help structural engineers to enhance their bridge pier designs.展开更多
Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notab...Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notably bridges,would experience significant flooding for which they were not intended and would be submerged.The flow field and shear stress distribution around tandem bridge piers under pressurized flow conditions for various bridge deck widths are examined using a series of three-dimensional(3D)simulations.It is indicated that scenarios with a deck width to pier diameter(Ld/p)ratio of 3 experience the highest levels of turbulent disturbance.In addition,maximum velocity and shear stresses occur in cases with Ld/p equal to 6.Results indicate that increasing the number of piers from 1 to 2 and 3 results in the increase of bed shear stress by 24%and 20%respectively.Finally,five machine learning algorithms,including Decision Trees(DT),Feed Forward Neural Networks(FFNN),and three Ensemble models,are implemented to estimate the flow field and the turbulent structure.Results indicated that the highest accuracy for estimation of U,and W,were obtained using AdaBoost ensemble with R2=0.946 and 0.951,respectively.Besides,the Random Forest algorithm outperformed AdaBoost slightly in the estimation of V and turbulent kinetic energy(TKE)with R2=0.894 and 0.951,respectively.展开更多
A two-dimensional mathematical model is used to simulate the influence of water flow on the piers of a bridge for different incidence angles.In particular,a finite volume method is used to discretize the Navier-Stokes...A two-dimensional mathematical model is used to simulate the influence of water flow on the piers of a bridge for different incidence angles.In particular,a finite volume method is used to discretize the Navier-Stokes control equations and calculate the circumferential pressure coefficient distribution on the bridge piers’surface.The results show that the deflection of the flow is non-monotonic.It first increases and then decreases with an increase in the skew angle.展开更多
Local scour is the reduction of original bed level around any hydraulic structure.Bridge failure due to scouring has made researchers study the cause of scouring and predict the scour depth and pattern around bridge p...Local scour is the reduction of original bed level around any hydraulic structure.Bridge failure due to scouring has made researchers study the cause of scouring and predict the scour depth and pattern around bridge piers and foundations.Several investigators have extensively studied local scour around isolated bridge pier,but modern designs of the bridges comprise of wide span and thus group of piers rather than a single pier.The flow and scour pattern around group of piers are different from the case of a single pier due to the interaction effect.The objective of present study is to investigate the effect of mutual interference of bridge piers on local scour experimentally around two piers in non-cohesive bed.Experiments were carried out on model bridge piers of circular cross section in a meandering channel.It was observed that when front and rear piers were placed at an angular displacement ofθ=40°and 80°respectively,maximum depth of scour is maximum.Hereθis the angle the line drawn at the inlet of bend to the line joining the centre of curvature and any point on the outer portion of the bend.展开更多
Spur dykes are the structures which are used to protect the eroding bank of rivers.They are sometimes also used to safeguard the life of many structures such as bridge piers,abutments etc.The efficiency of spur ...Spur dykes are the structures which are used to protect the eroding bank of rivers.They are sometimes also used to safeguard the life of many structures such as bridge piers,abutments etc.The efficiency of spur dykes has been checked in straight channels by conducting model tests in laboratories by many investigators.Very few studies were done in curved channels.In present work an attempt has been made to study the effect of location of spur dyke on bed and scour around bridge pier in curved open channel(bend angle=80o)with time.Experiment has been carried out in 80o channel bend at constant discharge(3.5×10^(-3) m^(3)/s)and bridge pier is located at angular displacementϴ=60o.Hereϴis the angle the line drawn at the inlet of any bend to the line joining the centre of curvature and any point on the outer portion of the bend.It is found that maximum scouring occurs atϴ=0o and 20oalong inner wall and atϴ=60o and 80o along outer wall.It is also found that scouring around bridge pier is more in the vicinity of pier and decreases with increase in distance from pier.The most suitable location for spur dyke to protect bridge pier is at angular displacementϴ=20o.Scour developed rapidly during initial time and then rate of scouring decreases with elapse of time.展开更多
At present, the bridge pier column construction needs to set up the operation platform, in the traditional technology often uses a large number of steel pipe, fastener materials and other materials to set up the opera...At present, the bridge pier column construction needs to set up the operation platform, in the traditional technology often uses a large number of steel pipe, fastener materials and other materials to set up the operation platform. In this paper, when the pier column is constructed, the cylindrical pier formwork is used to hang the operating platform, the cylindrical die has strong vertical bearing capacity after the two half die is closed and the whole die is synthesized, and the high strength bolt is used to prevent the bolt from breaking and blasting. The technology has high speed, high construction efficiency, stable safety performance and can be used many times. This paper mainly introduces the technology principle, construction process and quality control points of the external operation platform for bridge pier column construction.展开更多
文摘Introduction The predominant characteristics of high-altitude climates include low air pressure,low humidity,and large diurnal temperature fluctuations.In practical engineering scenarios in high-altitude regions,many pier surface cracks only appear several months after erection,and cyclic thermal stress is identified as the main trigger for such cracking.The thermal stress in concrete structures has been investigated for decades but remains incompletely understood.Structural engineers typically regard concrete as an isotropic material and calculate the thermal stress using code-specified coefficients of thermal expansion(CTEs)along with temperature conditions and constraints.Because the CTE of hardened cement paste is more than twice that of many aggregates,reducing the CTE of coarse aggregates can further exacerbate the thermal deformation incompatibility between the coarse aggregate and mortar matrix.In this paper,a comprehensive thermal-elastic mechanics model for pier concrete was developed to analysis the temperature-induced surface stress.Methods A series of mechanical and thermophysical tests were conducted on the diorite aggregate,ITZ cement paste,and mortar,and concrete.A test pier was constructed on open ground near the Yarlung Zangbo River at an altitude of 3800 m.The pier had a diameter of 1.8 m and height of 2 m.Temperature sensors were embedded in the cross-section at a height of 1 m,positioned along the southnorth and east-west directions.The embedding depths(distances from the pier surface)were 0,1.5,3,4.5,6,7.5,9,12,15,20,25,30,35,40,50,60,70,80 cm,and 90 cm.A model of the bridge pier concrete for surface-level analysis was constructed.The model consists of a concrete unit formed as a sphere-shell-shell composite,including the aggregate,ITZ,and mortar layers,embedded in the surface layer of a bridge pier.Outside this unit,the pier concrete was treated as an isotropic,homogeneous elastic material.The real-time internal temperature fields of high-altitude concrete bridge piers,measured on-site,were incorporated into the model.By applying thermoelastic mechanics theory and finite element solutions for plane strain problems,the three-dimensional thermal stresses on the surface layer of high-altitude bridge piers were analyzed Results and discussion During the experimental period,the lowest and highest temperatures on the bridge pier in the high-altitude region were 9.6 ℃ and 42.6 ℃,respectively.These occurred before sunrise and sunset on sunny days,respectively,corresponding to the local maximum temperature gradients during the surface heating and cooling stages,as well as the maximum temperature difference between the surface and center during these stages.The thermal stress on the pier concrete surface was obtained by superimposing the stresses caused by the uneven distribution of the internal temperature field and those caused by the incompatible thermal deformation among the different components in the surface concrete Before the erection of the upper structures,the absolute values of the tangential and vertical stresses were the same;therefore,only one curve was observed.From 22:00 to 8:00,the pier concrete surface was in tension,whereas from 11:00 to 22:00,the pier concrete surface was in compression.The surface of the pier concrete was subjected to biaxial forces of equal magnitude with a maximum compressive stress of 12.52 MPa and maximum tensile stress of 2.15 MPa,respectively at 18:00 and 8:00.According to the fatigue equation,the concrete was predicted to crack after 21 d of temperature cycling.Moreover,if humidity-induced stress is added on top of this,the tensile stress may approach or even exceed the concrete's tensile strength,thereby posing a significant risk of cracking.After the erection of upper structures,the tangential and vertical stresses no longer coincide because the upper structures have been erected.The curve of the tangential stress is unchanged,whereas the curve of the vertical stress is translated downwards by 1.57 MPa due to the structural deadweight.Therefore,the maximum tangential compressive stress remained 12.52 MPa,whereas the maximum vertical compressive stress increased to 14.09 MPa.Additionally,the maximum tangential tensile stress was 2.15 MPa,and the maximum vertical tensile stress was 0.58 MPa.According to Appendix C of GB/T 50010 and the fatigue equation,stresses are unlikely to cause cracking of the pier concrete surface.Although a higher CTE of the coarse aggregate slightly increased the maximum compressive stress,the differences among the three groups of concrete were minimal and could be ignored.Specifically,the maximum compressive stresses on the pier concrete surface were 12.54,12.45 MPa,and 12.56 MPa when using diorite,limestone,and basalt,respectively.By contrast,a lower CTE of the coarse aggregate results in a greater maximum tensile stress on the pier concrete surface.For example,when using limestone,which has a low CTE,the maximum tensile stress on the pier concrete surface is 2.28 MPa,compared to 2.17 MPa when using diorite and 2.14 MPa when using basalt.The finite element simulation results indicated that the maximum compressive stress on the pier concrete surface was 11.72 MPa,whereas the maximum tensile stress was 2.10 MPa.These results are approximately consistent with the theoretical calculations.This consistency provides mutual verification.Conclusions Surface cracking in pier concrete occurs predominantly before the erection of upper structures.Under sunny conditions,the orthogonal decomposition of the superficial stress revealed that the maximum compressive stress during the day was approximately 12.52 MPa,whereas the maximum tensile stress was approximately 2.15 MPa.This tensile stress approached the tensile strength of the C35 concrete under biaxial tension.The risk of cracking increased significantly when humidity-induced stress was considered.After the erection of upper structures,the maximum tangential tensile stress on the pier surface remained at 2.15 MPa while the maximum vertical stress decreased to 0.58 MPa,both of which are well below the tensile strength of C35 concrete under biaxial tension.Although the use of coarse aggregates with a lower coefficient of thermal expansion reduced the tensile stress induced by temperature gradients,it increased the stress owing to material deformation incompatibility,leading to a slight increase in the maximum tensile stress on the pier concrete surface.
基金supported by the National Natural Science Foundation of China(Grant numbers 41977233)。
文摘Bridge pier failures from granular flow impacts are common.Installing defense piles upstream is an effective mitigation strategy,yet their protective mechanisms and standardized design guidelines are unclear.This study employed 3D discrete element method to analyze the influence of defense pile size and placement on its performance across 219 scenarios,providing a detailed examination of their protective mechanisms.Results show that optimizing these factors can reduce the maximum impact force on bridge piers by up to 94%.In terms of size,a critical height threshold is identified,beyond which increasing pile height does not enhance protection.This threshold depends on the movement height of granular particles at the slope base.Protection effectiveness varies with pile size:when H≤0.05 h(H is the height of defense piles,h is the height of bridge),protection marginally improves with increasing height and diameter;for 0.05 h<H<0.15 h,protection strongly correlates with both parameters;for H≥0.15 h,diameter becomes the dominant factor.In terms of placement,an optimal longitudinal distance exists between the defense pile and the bridge pier.The larger the diameter,the greater the optimal longitudinal distance.However,the transverse distance is inversely related to protection effectiveness.Mechanistic analysis shows that defense piles are more effective at redirecting particles to prevent direct collisions with the pier(contributing 100%impact energy reduction before the non-dimensional travel time t*=7.01 and 63%–100%afterward)than at reducing particle velocity.This study provides insights into the protective mechanisms of defense piles and informs strategies for optimizing bridge pier protection in granular flow-prone regions.
基金National Natural Science Foundation of China under Grant Nos.52068045,U21A2012 and 41825015。
文摘Here,a seismic-response analysis model was proposed for evaluating the nonlinear seismic response of a pile-supported bridge pier under frozen and thawed soil conditions.The effect of a seasonally frozen soil layer on the seismic vulnerability of a pile-supported bridge pier was evaluated based on reliability theory.Although the frozen soil layer inhibited the seismic response of the ground surface to a certain extent,it exacerbated the acceleration response at the bridge pier top owing to the low radiation damping effect of the frozen soil layer.Furthermore,the frozen soil layer reduced the lateral displacement of the bridge pier top relative to the ground surface by approximately 80%,thereby preventing damage caused by earthquakes,such as falling girders.Compared to the thawed state of the ground surface,the bending moment of the bridge pier in frozen ground increases.However,the bending moment of the pile foundation in frozen ground decreases,thereby lessening the seismic vulnerability of the bridge pile foundation.The results of this can provide a reference for the seismic response analysis and seismic risk assessment of pile-supported bridges in seasonally frozen regions.
基金National Natural Science Foundation of China under Grant Nos.51408359,52278527 and 52478536。
文摘To address local concrete damage in joint areas at the footing of prefabricated assembled self-centering bridge piers(PASPs)in seismic design,a damage transfer configuration(DTC)was proposed,based on the bridge pier structure configuration and the mechanism of local damage formation.Integrating the DTC into the PASP,numerical models of a previous experimental reference PASP and a PASP with damage transfer configuration(DTPASP)were established using the finite element software ABAQUS with a concrete damage plasticity(CDP)model.The models were then compared with experimental results regarding damage distribution,hysteresis curves,energy dissipation capacity,the joint opening degree,and residual displacement.The findings indicate that the finite element model developed in this study can well reflect the experimental results of the reference PASP.The incorporation of the DTC proved to be beneficial in preserving structural integrity,bearing capacity,and the functionality of the core structure of bridge piers following an earthquake.Meanwhile,this addition did not exert a significant influence on the seismic behavior of the core structure of the bridge pier.
基金National Natural Science Foundation of China under Grant No.51678150Science for Earthquake Resilience under Grant No.XH17064Australian Research Council Discovery Early Career Researcher Award(DECRA)
文摘In this study, three rapid repair techniques are proposed to retrofit circular bridge piers that are severely damaged by the flexural failure mode in major earthquakes. The quasi-static tests on three 1：2.5 scaled circular pier specimens are conducted to evaluate the efficiency of the proposed repair techniques. For the purpose of rapid repair, the repair procedure for all the specimens is conducted within four days, and the behavior of the repaired specimens is evaluated and compared with the original ones. A finite element model is developed to predict the cyclic behavior of the repaired specimens and the numerical results are compared with the test data. It is found that all the repaired specimens exhibit similar or larger lateral strength and deformation capacity than the original ones. The initial lateral stiffness of all the repaired specimens is lower than that of the original ones, while they show a higher lateral stiffness at the later stage of the test. No noticeable difference is observed for the energy dissipation capacity between the original and repaired pier specimens. It is suggested that the repair technique using the early-strength concrete jacket confined by carbon fiber reinforced polymer （CFRP） sheets can be an optimal method for the rapid repair of severely earthquake-damaged circular bridge piers with flexural failure mode.
文摘Local scour around a bridge pier is an important parameter for the design of a bridge. Compared with the local scour in a mono-directional current, the local scour in a tidal current has its unique characteristics. In this paper, several aspects of local scour around bridge piers in tidal current, including the scour development process, the plane form of a scour hole and the maximum scour depth, are studied through movable bed flume experiments.
基金Supported by:National Natural Science Foundation of China Under Grant No.50878033 and National Special Foundation of Earthquake Science of China Under Grant No.200808021
文摘In recent earthquakes, a large number of reinforced concrete （RC） bridges were severely damaged due to mixed flexure-shear failure modes of the bridge piers. An integrated experimental and finite element （FE） analysis study is described in this paper to study the seismic performance of the bridge piers that failed in flexure-shear modes. In the first part, a nonlinear cyclic loading test on six RC bridge piers with circular cross sections is carried out experimentally. The damage states, ductility and energy dissipation parameters, stiffness degradation and shear strength of the piers are studied and compared with each other. The experimental results suggest that all the piers exhibit stable flexural response at displacement ductilities up to four before exhibiting brittle shear failure. The ultimate performance of the piers is dominated by shear capacity due to significant shear cracking, and in some cases, rupturing of spiral bars. In the second part, modeling approaches describing the hysteretic behavior of the piers are investigated by using ANSYS software. A set of models with different parameters is selected and evaluated through comparison with experimental results. The influences of the shear retention coefficients between concrete cracks, the Bauschinger effect in longitudinal reinforcement, the bond-slip relationship between the longitudinal reinforcement and the concrete and the concrete failure surface on the simulated hysteretic curves are discussed. Then, a modified analysis model is presented and its accuracy is verified by comparing the simulated results with experimental ones. This research uses models available in commercial FE codes and is intended for researchers and engineers interested in using ANSYS software to predict the hysteretic behavior of reinforced concrete structures.
基金National Natural Science Foundation of China Under Grant No.51008041 and 50978042the National Special Foundation of Earthquake Science of China Under Grant No.200808021the Fundamental Research Funds for the Central Universities Under Grant No.2011JC011
文摘An experimental study was conducted to investigate the feasibility of a proposed rapid repair technique for severely earthquake-damaged bridge piers with flexural-shear failure mode. Six circular pier specimens were first tested to severe damage in flexural-shear mode and repaired using early-strength concrete with high-fluidity and carbon fiber reinforced polymers （CFRP）. After about four days, the repaired specimens were tested to failure again. The seismic behavior of the repaired specimens was evaluated and compared to the original specimens. Test results indicate that the proposed repair technique is highly effective. Both shear strength and lateral displacement of the repaired piers increased when compared to the original specimens, and the failure mechanism of the piers shifted from flexural-shear failure to ductile flexural failure. Finally, a simple design model based on the Seible formulation for post-earthquake repair design was compared to the experimental results. It is concluded that the design equation for bridge pier strengthening before an earthquake could be applicable to seismic repairs after an earthquake if the shear strength contribution of the spiral bars in the repaired piers is disregarded and 1.5 times more FRP sheets is provided.
基金Project(50978095) supported by the National Natural Science Foundation of ChinaProject(IRT0917) supported by the Program for Changjiang Scholars and Innovative Research Team in Chinese UniversityProject supported by China Scholarship Council
文摘In order to predict the local scour hole and its evaluation around a cylindrical bridge pier, the computational fluid dynamics （CFD） and theories of sediment movement and transport were employed to carry out numerical simulations. In the numerical method, the time-averaged Reynolds Navier-Stokes equations and the standard k-e model were first used to simulate the three-dimensional flow field around a bridge pier fixed on river bed. The transient shear stress on river bed was treated as a crucial hydrodynamic mechanism when handling sediment incipience and transport. Then, river-bed volumetric sediment transport was calculated, followed by the modification of the river bed altitude and configuration. Boundary adaptive mesh technique was employed to modify the grid system with changed river-bed boundary. The evolution of local scour around a cylindrical bridge pier was presented. The numerical results represent the flow pattern and mechanism during the pier scouring, with a good prediction of the maximum scour hole depth compared with test results.
文摘In this work, experimental investigations have been pursued to analyse the influence of downward seepage on the turbulent characteristics of flow and corresponding changes in vortex structure around circular bridge pier in alluvial channel. Experiments were conducted in sand bed channel with circular piers of different sizes for no seepage, 10% seepage and 20% seepage cases. The measurement of turbulent flow statistics such as velocity and Reynolds stresses is found to be negative within the scour hole at upstream of the pier whereas application of downward seepage retards the reversal of the flow causing a decrement in the velocity and Reynolds stresses. Higher Reynolds shear stress prevails at the downstream side because of the production of wake vortices. Contribution of all bursting events to the total Reynolds shear stress production has been observed to increase with downward seepage. The analysis of integral scale suggest that size of eddies increases with seepage, which is responsible for increase in particle mobility. Initially rate of scouring is more which abatements gradually with expanding time as well as with the increased of downward seepage. Presence of downward seepage reduces the depth and length of vortex and shifts towards downstream side of the pier.
基金Supported by the West Waterway Transportation Construction Foundation under Grant No.2004-328-000-40.
文摘At present, the method of calculating the turbulent flow width around the bridge pier is not given in the ＂Standard for Inland River Navigation＂ （GB50139-2004） in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouting around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.
基金National Natural Science Foundation of China under Grant No.51608488Scientific and Technological Project of Henan Province,China under Grant No.222102320006+1 种基金Zhengzhou University 2022 Annual Basic Research Foundation for Young Teachers,China under Grant No.JC22547025Postdoctoral Research Grant in Henan Province。
文摘The deterioration of the performance of offshore bridges is particularly prominent due to the complex natural environment,including the coupling effects of earthquake and seawater erosion.In particular,bridge piers are the main energy-consuming and load-bearing components,so that excellent seismic capacity of bridge piers is the key to avoiding bridge damage.Although earthquake resistant behavior of ordinary reinforced concrete bridge piers(ordinary pier)can be improved by increasing the section size and reinforcement ratio of piers,the improvement of the earthquake resistant behavior is limited.To further improve the earthquake resistant behavior of bridge piers,high-tensile reinforcement engineered cementitious composite(ECC)bridge piers are utilized and time-varying seismic fragility analysis are conducted in this study.The refined model of a bridge pier is built by OpenSees.First,the influence of ECC replacement height on pier curvature is analyzed to determine the reasonable ECC height.Then,the time-varying fragility analysis of high-tensile reinforcement ECC piers(ECC composite piers)with durability damage are evaluated considering the time-varying law of materials.Four damage states,slight damage,moderate damage,extensive damage and complete collapse,are utilized in the study.These fragility curves indicate the durability damage can debase the earthquake resistant behavior of piers continually,the exceedance probability of the same state of destruction increases with the increase of peak ground acceleration(PGA)and service time of pier.The results also indicate that the corrosion level of chloride ion to pier is small during the early service period,and the bridge pier vulnerable curve is similar to that of the new bridge pier.As the level of chlorine ion corrosion deepens,transcendental probability is increased.Compared with the ordinary pier,the exceedance probability in each limit state of ECC composite piers is significantly reduced.The proposed ECC composite pies leads to better realistic time-varying earthquake resistant behavior.
基金National Natural Science Foundation of China under Grant Nos.51921006 and 51725801Fundamental Research Funds for the Central Universities under Grant No.FRFCU5710093320Heilongjiang Touyan Innovation Team Program。
文摘Reinforcement corrosion is the main cause of performance deterioration of reinforced concrete(RC)structures.Limited research has been performed to investigate the life-cycle cost(LCC)of coastal bridge piers with nonuniform corrosion using different materials.In this study,a reliability-based design optimization(RBDO)procedure is improved for the design of coastal bridge piers using six groups of commonly used materials,i.e.,normal performance concrete(NPC)with black steel(BS)rebar,high strength steel(HSS)rebar,epoxy coated(EC)rebar,and stainless steel(SS)rebar(named NPC-BS,NPC-HSS,NPC-EC,and NPC-SS,respectively),NPC with BS with silane soakage on the pier surface(named NPC-Silane),and high-performance concrete(HPC)with BS rebar(named HPC-BS).First,the RBDO procedure is improved for the design optimization of coastal bridge piers,and a bridge is selected to illustrate the procedure.Then,reliability analysis of the pier designed with each group of materials is carried out to obtain the time-dependent reliability in terms of the ultimate and serviceability performances.Next,the repair time of the pier is predicted based on the time-dependent reliability indices.Finally,the time-dependent LCCs for the pier are obtained for the selection of the optimal design.
基金Projects(50878083,50578060)supported by the National Natural Science Foundation of ChinaProject(200831878531)supported by the Ministry of Transportation of China
文摘In order to study bearing characteristics of bridge pile at steep slope under complex loads in mountians, according to double pile-column bridge piers engineering at steep slope and test models in laboratory, finite element analysis of pile-column bridge piers was carried out using software ADINA under different loadings, such as horizontal loading in the longitudinal direction along bridge, vertical loadings, slope top loadings and complex loadings. The numerical simulation results show that displacements of front pile pier top and back pile pier top are different under horizontal loadings in the longitudinal direction along bridge or vertical loadings, the displacements of front pile pier top are higher than those of back pile pier top, and its difference increases with the increase of loadings. Vertical displacements will also appear under slope top loadings, and displacements of front pier top are higher than those of back pier top too, while its difference reduces with the increase of loadings. Displacements of both front pile pier top and back pile pier top under comlex loading are larger than those under single loading.
基金supported by the Spanish Ministry of Science and Innovation(No. BIA2011-23602)the European Community with the European Regional Development Fund (FEDER), Spain
文摘This paper describes one approach to the design of reinforced concrete (RC) bridge piers, using a three-hybrid multi- objective simulated annealing (SA) algorithm with a neighborhood move based on the mutation operator from the genetic algorithms (GAs), namely MOSAMO1, MOSAMO2 and MOSAMO3. The procedure is applied to three objective functions: the economic cost, the reinforcing steel congestion and the embedded CO 2 emissions. Additional results for a random walk and a descent local search multi-objective algorithm are presented. The evaluation of solutions follows the Spanish Code for structural concrete. The methodology was applied to a typical bridge pier of 23.97 m in height. This example involved 110 design variables. Results indicate that algorithm MOSAMO2 outperforms other algorithms regarding the definition of Pareto fronts. Further, the proposed procedure will help structural engineers to enhance their bridge pier designs.
基金supported by the National Natural Science Foundation of China (Grant Nos.52179060 and 51909024).
文摘Various regions are becoming increasingly vulnerable to the increased frequency of floods due to the recent changes in climate and precipitation patterns throughout the world.As a result,specific infrastructures,notably bridges,would experience significant flooding for which they were not intended and would be submerged.The flow field and shear stress distribution around tandem bridge piers under pressurized flow conditions for various bridge deck widths are examined using a series of three-dimensional(3D)simulations.It is indicated that scenarios with a deck width to pier diameter(Ld/p)ratio of 3 experience the highest levels of turbulent disturbance.In addition,maximum velocity and shear stresses occur in cases with Ld/p equal to 6.Results indicate that increasing the number of piers from 1 to 2 and 3 results in the increase of bed shear stress by 24%and 20%respectively.Finally,five machine learning algorithms,including Decision Trees(DT),Feed Forward Neural Networks(FFNN),and three Ensemble models,are implemented to estimate the flow field and the turbulent structure.Results indicated that the highest accuracy for estimation of U,and W,were obtained using AdaBoost ensemble with R2=0.946 and 0.951,respectively.Besides,the Random Forest algorithm outperformed AdaBoost slightly in the estimation of V and turbulent kinetic energy(TKE)with R2=0.894 and 0.951,respectively.
文摘A two-dimensional mathematical model is used to simulate the influence of water flow on the piers of a bridge for different incidence angles.In particular,a finite volume method is used to discretize the Navier-Stokes control equations and calculate the circumferential pressure coefficient distribution on the bridge piers’surface.The results show that the deflection of the flow is non-monotonic.It first increases and then decreases with an increase in the skew angle.
文摘Local scour is the reduction of original bed level around any hydraulic structure.Bridge failure due to scouring has made researchers study the cause of scouring and predict the scour depth and pattern around bridge piers and foundations.Several investigators have extensively studied local scour around isolated bridge pier,but modern designs of the bridges comprise of wide span and thus group of piers rather than a single pier.The flow and scour pattern around group of piers are different from the case of a single pier due to the interaction effect.The objective of present study is to investigate the effect of mutual interference of bridge piers on local scour experimentally around two piers in non-cohesive bed.Experiments were carried out on model bridge piers of circular cross section in a meandering channel.It was observed that when front and rear piers were placed at an angular displacement ofθ=40°and 80°respectively,maximum depth of scour is maximum.Hereθis the angle the line drawn at the inlet of bend to the line joining the centre of curvature and any point on the outer portion of the bend.
文摘Spur dykes are the structures which are used to protect the eroding bank of rivers.They are sometimes also used to safeguard the life of many structures such as bridge piers,abutments etc.The efficiency of spur dykes has been checked in straight channels by conducting model tests in laboratories by many investigators.Very few studies were done in curved channels.In present work an attempt has been made to study the effect of location of spur dyke on bed and scour around bridge pier in curved open channel(bend angle=80o)with time.Experiment has been carried out in 80o channel bend at constant discharge(3.5×10^(-3) m^(3)/s)and bridge pier is located at angular displacementϴ=60o.Hereϴis the angle the line drawn at the inlet of any bend to the line joining the centre of curvature and any point on the outer portion of the bend.It is found that maximum scouring occurs atϴ=0o and 20oalong inner wall and atϴ=60o and 80o along outer wall.It is also found that scouring around bridge pier is more in the vicinity of pier and decreases with increase in distance from pier.The most suitable location for spur dyke to protect bridge pier is at angular displacementϴ=20o.Scour developed rapidly during initial time and then rate of scouring decreases with elapse of time.
文摘At present, the bridge pier column construction needs to set up the operation platform, in the traditional technology often uses a large number of steel pipe, fastener materials and other materials to set up the operation platform. In this paper, when the pier column is constructed, the cylindrical pier formwork is used to hang the operating platform, the cylindrical die has strong vertical bearing capacity after the two half die is closed and the whole die is synthesized, and the high strength bolt is used to prevent the bolt from breaking and blasting. The technology has high speed, high construction efficiency, stable safety performance and can be used many times. This paper mainly introduces the technology principle, construction process and quality control points of the external operation platform for bridge pier column construction.
