The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.Howeve...The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.展开更多
In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes tech...In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes technical exchanges and learning globally.Second,resources required for large model R&D are difficult for a single institution to obtain.The evaluation of general large models also requires the participation of experts from various industries.Third,without open source collaboration,it is difficult to form a unified upper-layer software ecosystem.Therefore,open source has become an important cooperation mechanism to promote the development of AI and large models.There are two cases to illustrate how open source and international standards interact with each other.展开更多
Soils in typical coal industrial areas are often enriched with heavy metals.In the Ningdong industrial park of Northwest China,rapid economic development and pollutant emissions have endangered the surrounding soil en...Soils in typical coal industrial areas are often enriched with heavy metals.In the Ningdong industrial park of Northwest China,rapid economic development and pollutant emissions have endangered the surrounding soil environment.Understanding the spatial distribution,hazards,and sources of heavy metals is crucial to mitigate their contamination in soil.The intense industrial activities in the region lead to complex and diverse origins of heavy metals,making single-source apportionment methods inadequate.In this study,we methodically collected 95 soil samples from a coal-electricity production base in the Ningdong industrial park,and determined the concentrations of Cu,Pb,Cd,Cr,As and Hg.It is found that the concentrations of Cu,Pb,Cd,Cr,As and Hg are 1.29 to 18.45 times higher than the background values.Comprehensive pollution indices indicated that 89.47%of the samples were severely polluted,with Cd and Hg posing the highest ecological risks.Positive Matrix Factorisation and Absolute Principal Component Score-Multiple Linear Regression models identified industrial sources,coal processing,traffic-coal combustion,and mining as primary contributors.Both models yielded similar results,with industrial and coal-related activities being dominant.Heavy metal concentrations were significantly higher in the northwestern and southeastern areas compared to the central region,closely associated with industrial and mining activities.These findings highlight the importance of targeted prevention and management strategies for heavy metal contamination in industrial parks.展开更多
During 7th-15th October 2023,an earthquake sequence with four MW6.2-6.3 occurred in the Herat region,Afghanistan,causing damage to buildings,fire,and loss of life.The co-seismic deformation induced by the earthquake s...During 7th-15th October 2023,an earthquake sequence with four MW6.2-6.3 occurred in the Herat region,Afghanistan,causing damage to buildings,fire,and loss of life.The co-seismic deformation induced by the earthquake sequence helps us invert the rupture model of these earthquakes to constrain the geometric characteristics of the Herat fault system,and estimate the future seismic risk at this fault system.In this work,we utilized the line-of-sight(LOS)displacements from Interferometric Synthetic Aperture Radar(InSAR)observations to determine the optimal fault geometry and slip distribution of the 2023 Afghanistan earthquake sequence through a two-step inversion method.Our results indicated that these four MW6.2-6.3 earthquakes ruptured the western and northwestern segments of the Herat fault system,which are dominated by thrust motions.We identified two fault models from InSAR LOS displacement data,with two different strikes,and the same dip angle range of about 35-45°.The source model with the strike of 280.5°has a peak slip of about 2.2 m,a central rupture zone with about 25 km along-strike length,and a depth range of 5-10 km,corresponding to a MW6.67 earthquake.The following source model with the strike direction of about 240°has smaller rupture length and width,and a peak slip of about 2.5 m,corresponding to a MW6.65 earthquake.We also calculated the Coulomb Failure Stress of the Herat fault system around this rupture area caused by this earthquake sequence.Our results indicated that the stress loading at the western segment of the Herat Fault system is greater than the triggering threshold,suggesting that the future seismic risk in this area is at a relatively high stage.In summary,the rupture model of these earthquakes indicates that two unidentified thrust faults between the western and northwestern segments of the Herat fault system are in a compression-stress environment.展开更多
The importance of organic geochemistry and basin modeling is widely recognized and used to understand the source rock potential and hydrocarbon generation history of the Mangahewa Formation,and thereby given the found...The importance of organic geochemistry and basin modeling is widely recognized and used to understand the source rock potential and hydrocarbon generation history of the Mangahewa Formation,and thereby given the foundational role in the petroleum exploration.This study utilized the total organic carbon(TOC)content and hydrogen index(HI)to investigate the dominant kerogen type and hydrogen richness for the significance of petroleum generative potential.The Mangahewa coals and carbonaceous shales exhibit an excellent source rocks,with high total organic content(TOC)of more than 22%.The coals and carbonaceous shales were also characterised by Type Ⅱ‒Ⅲ kerogen with Type Ⅲ kerogen,promising oiland gas-prones.The Mangahewa Formation reached the main oil generation,with vitrinite reflectances between 0.53%and 1.01%.Vitrinite reflectance was also used in developing themal models and reveal the transformation(TR)of 10‒50%kerogen to oil during the Late Miocene.The models also showed that the Mangahewa source rock has a significant oil generation and little expulsion competency,with a TR of up to 54%.These findings support the substantial oil-generating potential in the Taranaki Basin's southern graben and can be used as a guide when developing strategies for an oil exploration program.展开更多
Black carbon(BC)aerosol can lead to adverse health effects and drive climate change;therefore,the characteristic research and identification of BC sources are essential for lowering emissions.In this study,equivalent ...Black carbon(BC)aerosol can lead to adverse health effects and drive climate change;therefore,the characteristic research and identification of BC sources are essential for lowering emissions.In this study,equivalent black carbon(eBC)measurement was performed using a seven-wavelength Aethalometer(AE33)at an urban site in a typical industrial city(Zibo)of Northern China for the first time.The monitoring was performed from February 2021 to January 2022.The mass absorption cross-section(MAC)of AE33 was optimised using the online elemental carbon(EC)data,and eBC was corrected using the MAC.The corrected annual BC concentration was 1.72±1.18μg/m^(3).The diurnal variation of BC depicted a bimodal distribution.Furthermore,the BC concentration on weekends was 18%lower than on weekdays.The diurnal variation and weekend effect reflect the critical contributions of traffic emission to BC concentration.The source apportionment of BC was calculated by a constraining Aethalometer model,which restricted theÅngstrom exponent using the online potassium ions.The results revealed that BC was not significantly affected by biomass burning(BC_(bb))in Zibo.The relative contribution of BC_(bb)was higher in winter than in other seasons.The daily morning peak of BC was primarily influenced by traffic sources,whereas the contribution of biomass burning increased after 17:00 in the evening peak.Our findings suggest that it is more important to control fossil fuel sources for BC emission reduction in Zibo,while it is necessary to strengthen the control of biomass combustion sources in winter.展开更多
Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions...Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.展开更多
Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information ...Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.展开更多
Jiaojiang sag in the East China Sea Basin is at the earlier exploration stage,where characterizing hydrocarbon generation of source rocks is important to understand oil-gas exploration potential.Utilizing geochemical ...Jiaojiang sag in the East China Sea Basin is at the earlier exploration stage,where characterizing hydrocarbon generation of source rocks is important to understand oil-gas exploration potential.Utilizing geochemical and basin modeling analysis,hydrocarbon generation capacity and process of the Paleocene E_(1)y,E_(1)l and E_(1)m formations were investigated.Results show that E_(1)y and E_(1)l mudstones are high-quality source rocks with Type Ⅱ kerogen,which is dominated by both aquatic organisms and terrestrial higher plants deposited in sub-reduced environment.E_(1)m mudstone interbedded with thin carbonaceous mudstone and coal is poor-quality source rock with Type Ⅲ kerogen,whose organic matter was originated from terrestrial higher plants under oxidized environment.Controlled by burial and maturity histories,E_(1)y and E_(1)l source rocks experienced two hydrocarbon generation stages,which took place in the Late Paleocene and in the Middle to Late Eocene,respectively,and had high hydrocarbon generation capacity with cumulative hydrocarbon volume of 363 and 328 mg/g,respectively.E_(1)m source rock only had one hydrocarbon generation process in the Late Eocene,which had low hydrocarbon generation capacity with cumulative hydrocarbon volume of only 24 mg/g.The future oil-gas exploration in the Jiaojiang sag should focus on hydrocarbon generation center and select targets in the central uplift formed before the Miocene with high-quality traps.展开更多
Several conjugate components represent the aquatic ecosystem of Lake Baikal:Baikal water(surface and deep water),groundwater from boreholes,water of numerous Baikal tributaries,cold and hot mineral springs around Lake...Several conjugate components represent the aquatic ecosystem of Lake Baikal:Baikal water(surface and deep water),groundwater from boreholes,water of numerous Baikal tributaries,cold and hot mineral springs around Lake Baikal,and the Angara River,the only runoff reflecting all this aquatic diversity.River waters in the Baikal region are known to be deficient in some vital elements,including fluorine.This article discusses the features of the fluorine distribution in the water from the conjugate components of the Baikal ecosystem.Fluorine ion concentrations in the water of the Baikal ecosystem was determined using the potentiometric method.The study represents the monitoring that was carried out between 1997 and 2022 years.We determine likely causes of high and low fluorine concentrations in the water from different components,propose and substantiate the fluorine sources,geological and geochemical model of its influx and distribution features in the water of the Baikal ecosystem.展开更多
An integrated study on source rock characterization and hydrocarbon generation potential modeling was conducted for the selected Dingo Claystone,Barrow Sub-basin,Australia.In this study,data were collected solely from...An integrated study on source rock characterization and hydrocarbon generation potential modeling was conducted for the selected Dingo Claystone,Barrow Sub-basin,Australia.In this study,data were collected solely from two wells represented by the Bambra-1 and Bambra-2 wells.The collected data include those from bulk geochemical analyses of cuttings and sidewall cores sampled from the Late Jurassic Dingo Claystone.Geochemical data obtained from Rock-Eval pyrolysis and gas chromatography(GC)of extracted organic matter were integrated for source rock characterization and the construction of burial history and hydrocarbon generation in the Dingo Claystone.To improve the accuracy of thermal maturity estimations,only samples with S2 greater than 1 were considered due to potential issues with peak integration and uncertainties of Tmax determination in samples with lower S2 values.Furthermore,Rock-Eval data from the Bambra wells may be unreliable due to the contamination of cuttings and sidewall core(SWC)samples by drilling mud additives and natural hydrocarbons,which could impact the reliability of the data for determining thermal maturity.This study reveals that the Dingo Claystone Formation has total organic carbon(TOC)contents ranging from 0.66%to 8.31%.A poor to good hydrocarbon generation potential is indicated,with a production yield(PY=S_(1)+S_(2))ranging from 1.37 to 10.44 mg HC/g rock.Hydrogen index values vary between 42 and 226 mg HC/g TOC,confirming that the Dingo Claystone is dominantly kerogen TypeⅢ,with minor contributions from typesⅡ/ⅢandⅣ.Thermal maturity ranges from immature to late mature and is mostly in the oil window.This is indicated by T_(max)values of 398-462℃and vitrinite reflectance(Ro,%)of 0.47-1.99.Some samples show suppressed T_(max)and a higher production index,which is typical for samples affected by drilling fluids during drilling operations.Additionally,gas chromatography(GC)analyses are used to interpret the paleodepositional environment showing mixed input between marine and terrestrial origins of the source rocks.One-dimensional basin modeling for the Bambra-1 and Bambra-2 wells was carried out to evaluate the burial and thermal history of the formation.The transformation ratio suggests that hydrocarbon generation has not reached its peak and is still in an ongoing phase.An indication of hydrocarbon migration can be observed in this formation based on the transformation ratio.The effects of contamination warrant further investigation,as it could significantly impact maturity estimates and data reliability.展开更多
Introduction:Having a primary care usual source of care(USC)is associated with better population health outcomes.However,the percent of adults in the United States(US)with a usual primary care provider is declining.We...Introduction:Having a primary care usual source of care(USC)is associated with better population health outcomes.However,the percent of adults in the United States(US)with a usual primary care provider is declining.We sought to identify factors associated with establishing a USC at an urgent care clinic or emergency department as opposed to primary care.Methods:We analyzed data from 57,152 participants in the All of Us study who reported having a USC.We used the Andersen Behavioral Model of Health Services Use framework and multivariable logistic regression to examine associations among predisposing,enabling,and need factors,according to the source of usual care.Results:An urgent care clinic,minute clinic,or emergency department was the source of usual care for 6.3%of our sample.The odds of seeking care at this type of facility increased with younger age,lower educational attainment,and better health status.Black and Hispanic individuals,as well as those who reported experiencing discrimination in medical settings or that their provider was of a different race and ethnicity,were also less likely to have a primary care USC.Financial concerns,being anxious about seeing a provider,and the inability to take time off from work also increased the likelihood of having a non‐primary care USC.Conclusions:Improving the rates of having a primary care USC among younger and healthy adults may be achievable through policies that can improve access to convenient,affordable primary care.Efforts to improve diversity among primary care providers and reduce discrimination experienced by patients may also improve the USC rates for racial and ethnic minority groups.展开更多
Environmental problems from heavy metals(HMs)attract global attention.Accurately identifying sources and quantitatively evaluating ecological risks are keys for HMs pollution prevention.Dongting Lake in China was inve...Environmental problems from heavy metals(HMs)attract global attention.Accurately identifying sources and quantitatively evaluating ecological risks are keys for HMs pollution prevention.Dongting Lake in China was investigated through integrated methods like positive matrix factorization and Nemerow integrated risk index to examine spatial distribution,contamination characteristics,pollution sources,and the contribution of each source and pollutant to the ecological risk of 14 HMs in its surface sediments.Results showed that the mean concentrations of HMs were 0.82-9.44 times greater than the corresponding background values.The spatial distribution of HMs varied significantly,with high values of As,Cd,Mn,Pb,Sn,Tl and Zn concentrated in the sediments from Xiangjiang inlet and Yangtze outlet;Co,Cr,Cu,Ni and V in the Lishui sediments;Hg and Sb in the sediments from Yuanjiang and Zishui inlets,respectively.The accumulation of HMs was affected by five sources:mercury mining and atmospheric deposition(F1)(17.99%),urban domestic sewage and industrial sewage discharge(F2)(24.44%),antimony ore mining and smelting(F3)(6.50%),non-ferrous metal mining and extended processing industrial sources(F4)(15.72%),and mixed sources mainly from natural sources and agricultural sources(F5)(35.35%).F1 and F2 were identified as priority pollution sources;Cd,Hg,Tl,Sb and As,especially Cd and Hg,posed relatively high ecological risks and were prioritized HMs for control.展开更多
An accurate assessment of the evacuation efficiency in case of disasters is of vital importance to the safety design of buildings and street blocks.Hazard sources not only physically but psychologically affect the ped...An accurate assessment of the evacuation efficiency in case of disasters is of vital importance to the safety design of buildings and street blocks.Hazard sources not only physically but psychologically affect the pedestrians,which may further alter their behavioral patterns.This effect is especially significant in narrow spaces,such as corridors and alleys.This study aims to integrate a non-spreading hazard source into the social force model following the results from a previous experiment and simulation,and to simulate unidirectional pedestrian flows over various crowd densities and clarity–intensity properties of the hazard source.The integration include a virtual repulsion force from the hazard source and a decay on the social force term.The simulations reveal(i)that the hazard source creates virtual bottlenecks that suppress the flow,(ii)that the inter-pedestrian push forms a stabilisation phase on the flow-density curve within medium-to-high densities,and(iii)that the pedestrians are prone to a less orderly and stable pattern of movement in low clarity–intensity scenarios,possibly with lateral collisions passing the hazard source.展开更多
The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and res...The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.展开更多
The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current wor...The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.展开更多
A new approach to conductive electromagnetic interference （EMI） noise source modeling, i. e. the source internal impedance extraction, is presented. First, the impedance magnitude is achieved through an exciting pro...A new approach to conductive electromagnetic interference （EMI） noise source modeling, i. e. the source internal impedance extraction, is presented. First, the impedance magnitude is achieved through an exciting probe and a detecting probe, or through calculations based on insertion loss measurement results when inserting a series nigh-value known impedance or a shunt low-value known impedance in the circuit. Then the impedance phase is extracted by the Hilbert transform （HT） of the logarithm of the obtained impedance magnitude. Performance studies show that the estimated phase error can increase greatly at a zero frequency in the Hilbert transform because of the existence of a singular point, and this effect can be eliminated by introducing a zero-point when the noise source does not include a series-connected capacitive component. It is also found that when the frequency is nigher than 150 kHz, the estimated phase error is not sensitive to the inductive source but sensitive to the capacitive source. Finally, under the conditions of the same measurement accuracies for impedance magnitude, the accuracy of complex impedance based on the HT can be improved about 10 times when compared with the accuracy of estimated parameters based on the impedance magnitude fitting method （IMFM）.展开更多
The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is signif...The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is significantly modified by humans.To understand the sulfur cycle in aquatic systems in arid environment,the chemical and sulfur and oxygen isotopic compositions (δ^(34)S_(SO4)and δ^(18)O_(SO4)) of major rivers around the Badain Jaran Desert,northwestern China,were investigated.These rivers had averaged SO_(4)^(2-)content at 1336μmol/L,over 10times higher than the global average.The δ^(34)S_(SO4)and δ^(18)O_(SO4)values ranged from-5.3‰to+11.8‰and+1.6‰to+12.8‰,respectively.The end-member analysis and the inverse model showed that riverine sulfate was mainly derived from evaporites dissolution (0-87%),sulfide oxidation (13%-100%) and precipitation (0-33%),indicating heterogeneity in sulfur sources and behaviors along the river drainage with the lithology variations and climate gradients.Multiple isotopic tools combining with hydro-chemistry compositions could be applied to reveal sulfur cycle in arid environment.Based on the calculation,sulfide oxidation plays the primary role in the headwater and upstream in the Qilian-Mountains area,where sulfide is widely exposed.While the proportion of evaporites dissolution contributing to riverine sulfate is much higher in downstream in a drier environment.Besides,less precipitation and higher temperature can lead to more intensive evaporation,affecting the process of sulfide oxidation and enhancing the rates of evaporites dissolution and sulfate precipitation in the basin.展开更多
Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identi...Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient remediation.Then,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic costs.The methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical modeling.Among these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution sources.The remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation location.The in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary pollution.The ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high costs.Different methods for pollution source identification and remediation technologies are applicable to different conditions.To achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of pollutants.Additionally,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42250103 and 42174090)the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(Grant No.GLAB2023ZR02)the MOST Special Fund from the State Key Laboratory of Geological Processes and Mineral Resources(Grant No.MSFGPMR2022-4).
文摘The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.
文摘In the era of AI,especially large models,the importance of open source has become increasingly prominent.First,open source allows innovation to avoid starting from scratch.Through iterative innovation,it promotes technical exchanges and learning globally.Second,resources required for large model R&D are difficult for a single institution to obtain.The evaluation of general large models also requires the participation of experts from various industries.Third,without open source collaboration,it is difficult to form a unified upper-layer software ecosystem.Therefore,open source has become an important cooperation mechanism to promote the development of AI and large models.There are two cases to illustrate how open source and international standards interact with each other.
基金funded by the National Natural Science Foundation of China(NSFC)(32360321)the Ningxia Key Research and Development Project(2024BEG02007)the Natural Science Foundation of Ningxia Hui Autonomous Region Project(2023AAC03046,2023AAC02018).
文摘Soils in typical coal industrial areas are often enriched with heavy metals.In the Ningdong industrial park of Northwest China,rapid economic development and pollutant emissions have endangered the surrounding soil environment.Understanding the spatial distribution,hazards,and sources of heavy metals is crucial to mitigate their contamination in soil.The intense industrial activities in the region lead to complex and diverse origins of heavy metals,making single-source apportionment methods inadequate.In this study,we methodically collected 95 soil samples from a coal-electricity production base in the Ningdong industrial park,and determined the concentrations of Cu,Pb,Cd,Cr,As and Hg.It is found that the concentrations of Cu,Pb,Cd,Cr,As and Hg are 1.29 to 18.45 times higher than the background values.Comprehensive pollution indices indicated that 89.47%of the samples were severely polluted,with Cd and Hg posing the highest ecological risks.Positive Matrix Factorisation and Absolute Principal Component Score-Multiple Linear Regression models identified industrial sources,coal processing,traffic-coal combustion,and mining as primary contributors.Both models yielded similar results,with industrial and coal-related activities being dominant.Heavy metal concentrations were significantly higher in the northwestern and southeastern areas compared to the central region,closely associated with industrial and mining activities.These findings highlight the importance of targeted prevention and management strategies for heavy metal contamination in industrial parks.
基金funded by the PhD Starting Research Fund in East China Jiaotong University,Grant No.2003423017the National Natural Science Foundation of China(Grant Nos.42304009)。
文摘During 7th-15th October 2023,an earthquake sequence with four MW6.2-6.3 occurred in the Herat region,Afghanistan,causing damage to buildings,fire,and loss of life.The co-seismic deformation induced by the earthquake sequence helps us invert the rupture model of these earthquakes to constrain the geometric characteristics of the Herat fault system,and estimate the future seismic risk at this fault system.In this work,we utilized the line-of-sight(LOS)displacements from Interferometric Synthetic Aperture Radar(InSAR)observations to determine the optimal fault geometry and slip distribution of the 2023 Afghanistan earthquake sequence through a two-step inversion method.Our results indicated that these four MW6.2-6.3 earthquakes ruptured the western and northwestern segments of the Herat fault system,which are dominated by thrust motions.We identified two fault models from InSAR LOS displacement data,with two different strikes,and the same dip angle range of about 35-45°.The source model with the strike of 280.5°has a peak slip of about 2.2 m,a central rupture zone with about 25 km along-strike length,and a depth range of 5-10 km,corresponding to a MW6.67 earthquake.The following source model with the strike direction of about 240°has smaller rupture length and width,and a peak slip of about 2.5 m,corresponding to a MW6.65 earthquake.We also calculated the Coulomb Failure Stress of the Herat fault system around this rupture area caused by this earthquake sequence.Our results indicated that the stress loading at the western segment of the Herat Fault system is greater than the triggering threshold,suggesting that the future seismic risk in this area is at a relatively high stage.In summary,the rupture model of these earthquakes indicates that two unidentified thrust faults between the western and northwestern segments of the Herat fault system are in a compression-stress environment.
基金Supporting Project number(RSP2025R92)at King Saud University,Riyadh,Saudi Arabia,for their support.
文摘The importance of organic geochemistry and basin modeling is widely recognized and used to understand the source rock potential and hydrocarbon generation history of the Mangahewa Formation,and thereby given the foundational role in the petroleum exploration.This study utilized the total organic carbon(TOC)content and hydrogen index(HI)to investigate the dominant kerogen type and hydrogen richness for the significance of petroleum generative potential.The Mangahewa coals and carbonaceous shales exhibit an excellent source rocks,with high total organic content(TOC)of more than 22%.The coals and carbonaceous shales were also characterised by Type Ⅱ‒Ⅲ kerogen with Type Ⅲ kerogen,promising oiland gas-prones.The Mangahewa Formation reached the main oil generation,with vitrinite reflectances between 0.53%and 1.01%.Vitrinite reflectance was also used in developing themal models and reveal the transformation(TR)of 10‒50%kerogen to oil during the Late Miocene.The models also showed that the Mangahewa source rock has a significant oil generation and little expulsion competency,with a TR of up to 54%.These findings support the substantial oil-generating potential in the Taranaki Basin's southern graben and can be used as a guide when developing strategies for an oil exploration program.
基金supported by the National Key Research and Development Program of China(Nos.2017YFC0212501 and 2017YFC0212503).
文摘Black carbon(BC)aerosol can lead to adverse health effects and drive climate change;therefore,the characteristic research and identification of BC sources are essential for lowering emissions.In this study,equivalent black carbon(eBC)measurement was performed using a seven-wavelength Aethalometer(AE33)at an urban site in a typical industrial city(Zibo)of Northern China for the first time.The monitoring was performed from February 2021 to January 2022.The mass absorption cross-section(MAC)of AE33 was optimised using the online elemental carbon(EC)data,and eBC was corrected using the MAC.The corrected annual BC concentration was 1.72±1.18μg/m^(3).The diurnal variation of BC depicted a bimodal distribution.Furthermore,the BC concentration on weekends was 18%lower than on weekdays.The diurnal variation and weekend effect reflect the critical contributions of traffic emission to BC concentration.The source apportionment of BC was calculated by a constraining Aethalometer model,which restricted theÅngstrom exponent using the online potassium ions.The results revealed that BC was not significantly affected by biomass burning(BC_(bb))in Zibo.The relative contribution of BC_(bb)was higher in winter than in other seasons.The daily morning peak of BC was primarily influenced by traffic sources,whereas the contribution of biomass burning increased after 17:00 in the evening peak.Our findings suggest that it is more important to control fossil fuel sources for BC emission reduction in Zibo,while it is necessary to strengthen the control of biomass combustion sources in winter.
基金Supported by the Research Project of China National Offshore Oil Corporation(SCKY-2023-HN-3)。
文摘Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.
基金supported in part by the National Key Research and Development Program of China under Grant No.2024YFE0200600the Zhejiang Provincial Natural Science Foundation of China under Grant No.LR23F010005the Huawei Cooperation Project under Grant No.TC20240829036。
文摘Along with the proliferating research interest in semantic communication(Sem Com),joint source channel coding(JSCC)has dominated the attention due to the widely assumed existence in efficiently delivering information semantics.Nevertheless,this paper challenges the conventional JSCC paradigm and advocates for adopting separate source channel coding(SSCC)to enjoy a more underlying degree of freedom for optimization.We demonstrate that SSCC,after leveraging the strengths of the Large Language Model(LLM)for source coding and Error Correction Code Transformer(ECCT)complemented for channel coding,offers superior performance over JSCC.Our proposed framework also effectively highlights the compatibility challenges between Sem Com approaches and digital communication systems,particularly concerning the resource costs associated with the transmission of high-precision floating point numbers.Through comprehensive evaluations,we establish that assisted by LLM-based compression and ECCT-enhanced error correction,SSCC remains a viable and effective solution for modern communication systems.In other words,separate source channel coding is still what we need.
基金supported by the China National Science and Technology Major Project(Nos.2016ZX05024-002-003,2017ZX05032-001-004)the Foundation of Key Laboratory of Tectonics and Petroleum Resources of Ministry of Education(China University of Geosciences),China(Nos.TPR-2022-11,TPR-2022-24)the Science and Technology Planning Project of Tangshan City,China(Nos.22130213H).
文摘Jiaojiang sag in the East China Sea Basin is at the earlier exploration stage,where characterizing hydrocarbon generation of source rocks is important to understand oil-gas exploration potential.Utilizing geochemical and basin modeling analysis,hydrocarbon generation capacity and process of the Paleocene E_(1)y,E_(1)l and E_(1)m formations were investigated.Results show that E_(1)y and E_(1)l mudstones are high-quality source rocks with Type Ⅱ kerogen,which is dominated by both aquatic organisms and terrestrial higher plants deposited in sub-reduced environment.E_(1)m mudstone interbedded with thin carbonaceous mudstone and coal is poor-quality source rock with Type Ⅲ kerogen,whose organic matter was originated from terrestrial higher plants under oxidized environment.Controlled by burial and maturity histories,E_(1)y and E_(1)l source rocks experienced two hydrocarbon generation stages,which took place in the Late Paleocene and in the Middle to Late Eocene,respectively,and had high hydrocarbon generation capacity with cumulative hydrocarbon volume of 363 and 328 mg/g,respectively.E_(1)m source rock only had one hydrocarbon generation process in the Late Eocene,which had low hydrocarbon generation capacity with cumulative hydrocarbon volume of only 24 mg/g.The future oil-gas exploration in the Jiaojiang sag should focus on hydrocarbon generation center and select targets in the central uplift formed before the Miocene with high-quality traps.
基金the framework of the IGC SB RAS project(No.0284-2021-0003)supported by the RFFR ofi_m project(No.17-29-05022).
文摘Several conjugate components represent the aquatic ecosystem of Lake Baikal:Baikal water(surface and deep water),groundwater from boreholes,water of numerous Baikal tributaries,cold and hot mineral springs around Lake Baikal,and the Angara River,the only runoff reflecting all this aquatic diversity.River waters in the Baikal region are known to be deficient in some vital elements,including fluorine.This article discusses the features of the fluorine distribution in the water from the conjugate components of the Baikal ecosystem.Fluorine ion concentrations in the water of the Baikal ecosystem was determined using the potentiometric method.The study represents the monitoring that was carried out between 1997 and 2022 years.We determine likely causes of high and low fluorine concentrations in the water from different components,propose and substantiate the fluorine sources,geological and geochemical model of its influx and distribution features in the water of the Baikal ecosystem.
文摘An integrated study on source rock characterization and hydrocarbon generation potential modeling was conducted for the selected Dingo Claystone,Barrow Sub-basin,Australia.In this study,data were collected solely from two wells represented by the Bambra-1 and Bambra-2 wells.The collected data include those from bulk geochemical analyses of cuttings and sidewall cores sampled from the Late Jurassic Dingo Claystone.Geochemical data obtained from Rock-Eval pyrolysis and gas chromatography(GC)of extracted organic matter were integrated for source rock characterization and the construction of burial history and hydrocarbon generation in the Dingo Claystone.To improve the accuracy of thermal maturity estimations,only samples with S2 greater than 1 were considered due to potential issues with peak integration and uncertainties of Tmax determination in samples with lower S2 values.Furthermore,Rock-Eval data from the Bambra wells may be unreliable due to the contamination of cuttings and sidewall core(SWC)samples by drilling mud additives and natural hydrocarbons,which could impact the reliability of the data for determining thermal maturity.This study reveals that the Dingo Claystone Formation has total organic carbon(TOC)contents ranging from 0.66%to 8.31%.A poor to good hydrocarbon generation potential is indicated,with a production yield(PY=S_(1)+S_(2))ranging from 1.37 to 10.44 mg HC/g rock.Hydrogen index values vary between 42 and 226 mg HC/g TOC,confirming that the Dingo Claystone is dominantly kerogen TypeⅢ,with minor contributions from typesⅡ/ⅢandⅣ.Thermal maturity ranges from immature to late mature and is mostly in the oil window.This is indicated by T_(max)values of 398-462℃and vitrinite reflectance(Ro,%)of 0.47-1.99.Some samples show suppressed T_(max)and a higher production index,which is typical for samples affected by drilling fluids during drilling operations.Additionally,gas chromatography(GC)analyses are used to interpret the paleodepositional environment showing mixed input between marine and terrestrial origins of the source rocks.One-dimensional basin modeling for the Bambra-1 and Bambra-2 wells was carried out to evaluate the burial and thermal history of the formation.The transformation ratio suggests that hydrocarbon generation has not reached its peak and is still in an ongoing phase.An indication of hydrocarbon migration can be observed in this formation based on the transformation ratio.The effects of contamination warrant further investigation,as it could significantly impact maturity estimates and data reliability.
文摘Introduction:Having a primary care usual source of care(USC)is associated with better population health outcomes.However,the percent of adults in the United States(US)with a usual primary care provider is declining.We sought to identify factors associated with establishing a USC at an urgent care clinic or emergency department as opposed to primary care.Methods:We analyzed data from 57,152 participants in the All of Us study who reported having a USC.We used the Andersen Behavioral Model of Health Services Use framework and multivariable logistic regression to examine associations among predisposing,enabling,and need factors,according to the source of usual care.Results:An urgent care clinic,minute clinic,or emergency department was the source of usual care for 6.3%of our sample.The odds of seeking care at this type of facility increased with younger age,lower educational attainment,and better health status.Black and Hispanic individuals,as well as those who reported experiencing discrimination in medical settings or that their provider was of a different race and ethnicity,were also less likely to have a primary care USC.Financial concerns,being anxious about seeing a provider,and the inability to take time off from work also increased the likelihood of having a non‐primary care USC.Conclusions:Improving the rates of having a primary care USC among younger and healthy adults may be achievable through policies that can improve access to convenient,affordable primary care.Efforts to improve diversity among primary care providers and reduce discrimination experienced by patients may also improve the USC rates for racial and ethnic minority groups.
基金financially supported by the Key Research and Development Program of Hunan Province,China(No.2023SK2006)the Natural Science Foundation of Hunan Province,China(No.2023JJ50057)+2 种基金the Science and Technology Plan Project of Geological Bureau of Hunan Province,China(No.HNGSTP202411)the Open Project of Key Laboratory of the Ministry of Natural Resources,China(No.BL202105)the Natural Science Foundation of Changsha City,China(No.kq2202090)。
文摘Environmental problems from heavy metals(HMs)attract global attention.Accurately identifying sources and quantitatively evaluating ecological risks are keys for HMs pollution prevention.Dongting Lake in China was investigated through integrated methods like positive matrix factorization and Nemerow integrated risk index to examine spatial distribution,contamination characteristics,pollution sources,and the contribution of each source and pollutant to the ecological risk of 14 HMs in its surface sediments.Results showed that the mean concentrations of HMs were 0.82-9.44 times greater than the corresponding background values.The spatial distribution of HMs varied significantly,with high values of As,Cd,Mn,Pb,Sn,Tl and Zn concentrated in the sediments from Xiangjiang inlet and Yangtze outlet;Co,Cr,Cu,Ni and V in the Lishui sediments;Hg and Sb in the sediments from Yuanjiang and Zishui inlets,respectively.The accumulation of HMs was affected by five sources:mercury mining and atmospheric deposition(F1)(17.99%),urban domestic sewage and industrial sewage discharge(F2)(24.44%),antimony ore mining and smelting(F3)(6.50%),non-ferrous metal mining and extended processing industrial sources(F4)(15.72%),and mixed sources mainly from natural sources and agricultural sources(F5)(35.35%).F1 and F2 were identified as priority pollution sources;Cd,Hg,Tl,Sb and As,especially Cd and Hg,posed relatively high ecological risks and were prioritized HMs for control.
基金Project supported by National Key Research and Development Program of China(Grant Nos.2022YFC3320800 and 2021YFC1523500)the National Natural Science Foundation of China(Grant Nos.71971126,71673163,72304165,72204136,and 72104123).
文摘An accurate assessment of the evacuation efficiency in case of disasters is of vital importance to the safety design of buildings and street blocks.Hazard sources not only physically but psychologically affect the pedestrians,which may further alter their behavioral patterns.This effect is especially significant in narrow spaces,such as corridors and alleys.This study aims to integrate a non-spreading hazard source into the social force model following the results from a previous experiment and simulation,and to simulate unidirectional pedestrian flows over various crowd densities and clarity–intensity properties of the hazard source.The integration include a virtual repulsion force from the hazard source and a decay on the social force term.The simulations reveal(i)that the hazard source creates virtual bottlenecks that suppress the flow,(ii)that the inter-pedestrian push forms a stabilisation phase on the flow-density curve within medium-to-high densities,and(iii)that the pedestrians are prone to a less orderly and stable pattern of movement in low clarity–intensity scenarios,possibly with lateral collisions passing the hazard source.
文摘The advantages of a flat-panel X-ray source(FPXS)make it a promising candidate for imaging applications.Accurate imaging-system modeling and projection simulation are critical for analyzing imaging performance and resolving overlapping projection issues in FPXS.The conventional analytical ray-tracing approach is limited by the number of patterns and is not applicable to FPXS-projection calculations.However,the computation time of Monte Carlo(MC)simulation is independent of the size of the patterned arrays in FPXS.This study proposes two high-efficiency MC projection simulators for FPXS:a graphics processing unit(GPU)-based phase-space sampling MC(gPSMC)simulator and GPU-based fluence sampling MC(gFSMC)simulator.The two simulators comprise three components:imaging-system modeling,photon initialization,and physical-interaction simulations in the phantom.Imaging-system modeling was performed by modeling the FPXS,imaging geometry,and detector.The gPSMC simulator samples the initial photons from the phase space,whereas the gFSMC simulator performs photon initialization from the calculated energy spectrum and fluence map.The entire process of photon interaction with the geometry and arrival at the detector was simulated in parallel using multiple GPU kernels,and projections based on the two simulators were calculated.The accuracies of the two simulators were evaluated by comparing them with the conventional analytical ray-tracing approach and acquired projections,and the efficiencies were evaluated by comparing the computation time.The results of simulated and realistic experiments illustrate the accuracy and efficiency of the proposed gPSMC and gFSMC simulators in the projection calculation of various phantoms.
文摘The quantum entangled photon-pair source,as an essential component of optical quantum systems,holds great potential for applications such as quantum teleportation,quan-tum computing,and quantum imaging.The current workhorse technique for preparing photon pairs involves performing spon-taneous parametric down conversion(SPDC)in bulk nonlinear crystals.However,the current power consumption and cost of preparing entangled photon-pair sources are relatively high,pos-ing challenges to their integration and scalability.In this paper,we propose a low-power system model for the quantum entan-gled photon-pair source based on SPDC theory and phase matching technology.This model allows us to analyze the per-formance of each module and the influence of component cha-racteristics on the overall system.In our experimental setup,we utilize a 5 mW laser diode and a typical type-II barium metabo-rate(BBO)crystal to prepare an entangled photon-pair source.The experimental results are in excellent agreement with the model,indicating a significant step towards achieving the goal of low-power and low-cost entangled photon-pair sources.This achievement not only contributes to the practical application of quantum entanglement lighting,but also paves the way for the widespread adoption of optical quantum systems in the future.
基金The Natural Science Foundation of Jiangsu Province(No.BK2008429)Open Research Foundation of State Key Laboratory of Millimeter Waves of Southeast University(No.K200603)+1 种基金China Postdoctoral Science Foundation(No.20080431126)Jiangsu Postdoctoral Science Foundation(No.2007-337)
文摘A new approach to conductive electromagnetic interference （EMI） noise source modeling, i. e. the source internal impedance extraction, is presented. First, the impedance magnitude is achieved through an exciting probe and a detecting probe, or through calculations based on insertion loss measurement results when inserting a series nigh-value known impedance or a shunt low-value known impedance in the circuit. Then the impedance phase is extracted by the Hilbert transform （HT） of the logarithm of the obtained impedance magnitude. Performance studies show that the estimated phase error can increase greatly at a zero frequency in the Hilbert transform because of the existence of a singular point, and this effect can be eliminated by introducing a zero-point when the noise source does not include a series-connected capacitive component. It is also found that when the frequency is nigher than 150 kHz, the estimated phase error is not sensitive to the inductive source but sensitive to the capacitive source. Finally, under the conditions of the same measurement accuracies for impedance magnitude, the accuracy of complex impedance based on the HT can be improved about 10 times when compared with the accuracy of estimated parameters based on the impedance magnitude fitting method （IMFM）.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences (No. XDB26000000)the National Key Research and Development Program of China (No. 2020YFA0607700)+2 种基金the National Natural Science Foundation of China (Nos. 41730857 and 42273050)the Key Research Program of the Institute of Geology&Geophysics,CAS (No. IGGCAS-202204)support from the Youth Innovation Promotion Association CAS (No.2019067)。
文摘The fate of riverine sulfate ion (SO_(4)^(2-)) and its environmental effects in arid environment are difficult to evaluate due to its complicated sources and strongly coupled behaviors with water cycle which is significantly modified by humans.To understand the sulfur cycle in aquatic systems in arid environment,the chemical and sulfur and oxygen isotopic compositions (δ^(34)S_(SO4)and δ^(18)O_(SO4)) of major rivers around the Badain Jaran Desert,northwestern China,were investigated.These rivers had averaged SO_(4)^(2-)content at 1336μmol/L,over 10times higher than the global average.The δ^(34)S_(SO4)and δ^(18)O_(SO4)values ranged from-5.3‰to+11.8‰and+1.6‰to+12.8‰,respectively.The end-member analysis and the inverse model showed that riverine sulfate was mainly derived from evaporites dissolution (0-87%),sulfide oxidation (13%-100%) and precipitation (0-33%),indicating heterogeneity in sulfur sources and behaviors along the river drainage with the lithology variations and climate gradients.Multiple isotopic tools combining with hydro-chemistry compositions could be applied to reveal sulfur cycle in arid environment.Based on the calculation,sulfide oxidation plays the primary role in the headwater and upstream in the Qilian-Mountains area,where sulfide is widely exposed.While the proportion of evaporites dissolution contributing to riverine sulfate is much higher in downstream in a drier environment.Besides,less precipitation and higher temperature can lead to more intensive evaporation,affecting the process of sulfide oxidation and enhancing the rates of evaporites dissolution and sulfate precipitation in the basin.
基金funded by the National Natural Science Foundation of China(41907175)the Open Fund of Key Laboratory(WSRCR-2023-01)the project of the China Geological Survey(DD20230459).
文摘Groundwater is an important source of drinking water.Groundwater pollution severely endangers drinking water safety and sustainable social development.In the case of groundwater pollution,the top priority is to identify pollution sources,and accurate information on pollution sources is the premise of efficient remediation.Then,an appropriate pollution remediation scheme should be developed according to information on pollution sources,site conditions,and economic costs.The methods for identifying pollution sources mainly include geophysical exploration,geochemistry,isotopic tracing,and numerical modeling.Among these identification methods,only the numerical modeling can recognize various information on pollution sources,while other methods can only identify a certain aspect of pollution sources.The remediation technologies of groundwater can be divided into in-situ and ex-situ remediation technologies according to the remediation location.The in-situ remediation technologies enjoy low costs and a wide remediation range,but their remediation performance is prone to be affected by environmental conditions and cause secondary pollution.The ex-situ remediation technologies boast high remediation efficiency,high processing capacity,and high treatment concentration but suffer high costs.Different methods for pollution source identification and remediation technologies are applicable to different conditions.To achieve the expected identification and remediation results,it is feasible to combine several methods and technologies according to the actual hydrogeological conditions of contaminated sites and the nature of pollutants.Additionally,detailed knowledge about the hydrogeological conditions and stratigraphic structure of the contaminated site is the basis of all work regardless of the adopted identification methods or remediation technologies.
