High-volume fraction silicon particle-reinforced aluminium matrix composites(Si/Al)are increasingly applied in aerospace,radar communications,and large-scale integrated circuits because of their superior thermal condu...High-volume fraction silicon particle-reinforced aluminium matrix composites(Si/Al)are increasingly applied in aerospace,radar communications,and large-scale integrated circuits because of their superior thermal conductivity,wear resistance,and low thermal expansion coefficient.However,the abrasive and adhesive wear caused by the hard silicon reinforcement and the ductile aluminium matrix leads to significant tool wear,decreased machining efficiency,and compromised surface quality.This study combines theoretical analysis and cutting experiments to investigate polycrystalline diamond(PCD)tool wear during milling of 70 vol%Si/Al composite.A key contribution of this work is the development of a tool wear model that incorporates reinforcement particle characteristics,treating them as ellipsoidal structures,which enhances the accuracy of predicting abrasive and adhesive wear mechanisms.The model is based on abrasive and adhesive wear mechanisms,and can analyze the interaction between silicon particles,aluminium matrix,and tool components,thus providing deeper insights into PCD tool wear processes.Experimental validation of the model shows a good agreement with the results,with a mean deviation of approximately 10%.The findings on the tool wear mechanism reveal that,as tool wear progresses,the proportion of abrasive wear increases from 40%in the running-in stage to 75%in the rapid wear stage,while adhesive wear decreases.The optimal machining parameters of 120 m·min^(–1) cutting speed(v_(c))and 0.04 mm·z^(–1) feed rate(f_(z)),result in tool life of 33 min and surface roughness(S_(a))of 2.2μm.The study uncovers the variation patterns of abrasive and adhesive wear during the tool wear process,and the proposed model offers a robust framework for predicting tool wear during the machining of high-volume fraction Si/Al composites.The research findings also offer key insights for optimizing tool selection and machining parameters,advancing both the theoretical understanding and practical application of PCD tool wear.展开更多
The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable...The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.展开更多
As 3D digital photographic and scanning devices produce higher resolution images, acquired geometric data sets grow more complex in terms of the modeled objects＇ size, geometry, and topology. As a consequence, point-...As 3D digital photographic and scanning devices produce higher resolution images, acquired geometric data sets grow more complex in terms of the modeled objects＇ size, geometry, and topology. As a consequence, point-sampled geometry is becoming ubiquitous in graphics and geometric information processing, and poses new challenges which have not been fully resolved by the state-of-art graphical techniques. In this paper, we address the challenges by proposing a meshless computational framework for dynamic modeling and simulation of solids and thin-shells represented as point sam- ples. Our meshless framework can directly compute the elastic deformation and fracture propagation for any scanned point geometry, without the need of converting them to polygonal meshes or higher order spline representations. We address the necessary computational techniques, such as Moving Least Squares, Hierarchical Discretization, and Modal Warping, to effectively and efficiently compute the physical simulation in real-time. This meahless computational framework aims to bridge the gap between the point-sampled geometry with physics-based modeling and simulation governed by partial differential equations.展开更多
A new framework for free-form surface design is proposed. Using manifolds can generalize the spline scheme to surfaces of arbitrary topology. Physics-based modeling incorporate physical laws into shape representation ...A new framework for free-form surface design is proposed. Using manifolds can generalize the spline scheme to surfaces of arbitrary topology. Physics-based modeling incorporate physical laws into shape representation to provide direct shape interaction. The combination presents a new method inherits the attractive properties of the manifold surface as well as that of the physics-based models.展开更多
In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and cha...In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.展开更多
(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbi...(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.展开更多
In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical propert...In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.展开更多
In-space cable-driven manipulators exhibit several advantages,such as a large range of motion,high dexterity,and lightweight structure.However,kinematic and dynamic analysis play an essential role in designing a cable...In-space cable-driven manipulators exhibit several advantages,such as a large range of motion,high dexterity,and lightweight structure.However,kinematic and dynamic analysis play an essential role in designing a cable-driven manipulator.In this paper,the kinematic analysis of a type of cable-driven manipulator is performed,and a motion planning scheme is conducted to actuate this manipulator.Moreover,a flexible multi-body dynamic model of a cable-driven manipulator considering the frictional contact between the cables and pulleys is established.To describe properties such as flexibility,vibration,and variable length of the cable,this paper utilizes reducedorder beam elements of the Absolute Nodal Coordinates Formulation(ANCF)in Arbitrary Lagrangian Eulerian(ALE)framework.Additionally,a virtual element is introduced to model the contact segment in the cable-pulley system.A tension decay factor is employed to account for the friction in the contact segment.To validate the proposed method,a semi-analytical model based on D'Alembert's principle is established.Cross-verification is performed to validate the accuracy of both models.The model is further applied to simulate the rotation of the cable-driven manipulator with different structural parameters and frictional factors.The results from the analyses provide valuable guidance for the design and motion control of the in-space cable-driven manipulator.Finally,a prototype of a single module is manufactured and tested.Ground experiments are carried out to verify the kinematic and dynamic models.展开更多
Glassy polymers are widely used in biomedical applications in a solvent environment,yet their long-term performance is governed by the competing effects of physical aging and solvent-induced plasticization.Here,we dev...Glassy polymers are widely used in biomedical applications in a solvent environment,yet their long-term performance is governed by the competing effects of physical aging and solvent-induced plasticization.Here,we develop a constitutive model that explicitly couples the solvent concentration,structural relaxation,and mechanical response.This framework is built on a multiplicative decomposition of deformation and an Eyring-type flow rule,with structural evolution described by an effective temperature.A generalized shift factor is introduced to quantify how the solvent concentration and effective temperature jointly affect the relaxation time,thereby integrating physical aging and plasticization.The model is subsequently applied to methacrylate(MA)-based copolymer networks immersed in phosphate-buffered saline for up to nine months.Simulations accurately capture key experimental features,including the strong softening of highly swellable networks,the partial recovery due to aging,and the mitigating role of hydrophobic crosslinking in reducing solvent uptake.While the current single-mode description cannot reproduce the full relaxation spectrum,it establishes an efficient framework for predicting the long-term mechanical performance under coupled environmental and mechanical loading.This study provides a constitutive description of solvent-swollen glassy polymers,offering mechanistic insight into the interplay between plasticization and aging.Beyond biomedical MA networks,this framework establishes a foundation for predicting the long-term performance of polymer glasses under coupled aqueous environmental and mechanical loading.展开更多
Huperzine A(HupA) is a highly selective, reversible acetylcholinesterase(AChE) inhibitor that exhibits neuroprotective effects and is clinically used to manage benign memory decline.However, the specific relationship ...Huperzine A(HupA) is a highly selective, reversible acetylcholinesterase(AChE) inhibitor that exhibits neuroprotective effects and is clinically used to manage benign memory decline.However, the specific relationship between the pharmacokinetic(PK) profile of HupA and cerebral acetylcholine(ACh) dynamics remains poorly characterized. Here, we characterize the PK-pharmacodynamic(PD) properties of HupA in rats under both physiological and pathological conditions. Following a single intramuscular injection, HupA exhibits a short halflife but rapid brain penetration, while multiple dosing significantly enhances its brain exposure. In a middle cerebral artery occlusion(MCAO) rat model, HupA demonstrates increased brain distribution. Furthermore, HupA elevates ACh concentrations across multiple brain regions, concurrently modulating several monoamine neurotransmitters. Using a minimal physiologically based pharmacokinetic-pharmacodynamic(mPBPK-PD) modeling approach,cerebral ACh dynamics were accurately predicted based on the pharmacokinetics of HupA in systemic circulation. The developed mPBPK-PD model exhibits robust predictive performance and holds potential for guiding the optimization of clinical dosing regimens and improving the therapeutic efficacy of HupA.展开更多
Activation pruning reduces neural network complexity by eliminating low-importance neuron activations,yet identifying the critical pruning threshold—beyond which accuracy rapidly deteriorates—remains computationally...Activation pruning reduces neural network complexity by eliminating low-importance neuron activations,yet identifying the critical pruning threshold—beyond which accuracy rapidly deteriorates—remains computationally expensive and typically requires exhaustive search.We introduce a thermodynamics-inspired framework that treats activation distributions as energy-filtered physical systems and employs the free energy of activations as a principled evaluation metric.Phase-transition-like phenomena in the free-energy profile—such as extrema,inflection points,and curvature changes—yield reliable estimates of the critical pruning threshold,providing a theoretically grounded means of predicting sharp accuracy degradation.To further enhance efficiency,we propose a renormalized free energy technique that approximates full-evaluation free energy using only the activation distribution of the unpruned network.This eliminates repeated forward passes,dramatically reducing computational overhead and achieving speedups of up to 550×for MLPs.Extensive experiments across diverse vision architectures(MLP,CNN,ResNet,MobileNet,Vision Transformer)and text models(LSTM,BERT,ELECTRA,T5,GPT-2)on multiple datasets validate the generality,robustness,and computational efficiency of our approach.Overall,this work establishes a theoretically grounded and practically effective framework for activation pruning,bridging the gap between analytical understanding and efficient deployment of sparse neural networks.展开更多
Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evo...Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.展开更多
Xylogenesis,the process through which wood cells are formed,results in the long-term storage of carbon in woody biomass,making it a key component of the global carbon cycle.Understanding how environmental drivers infl...Xylogenesis,the process through which wood cells are formed,results in the long-term storage of carbon in woody biomass,making it a key component of the global carbon cycle.Understanding how environmental drivers influence xylogenesis during the growing season is therefore of great interest.However,studying shortterm drivers of wood production using xylogenetic data is complicated by the usual sampling scheme and the influence of eccentric growth,i.e.,heterogeneous growth around the stem.In this study,we improve xylogenesis research by introducing a statistical approach that explicitly considers seasonal phenology,short-term growth rates,and growth eccentricity.To this end,we developed Bayesian models of xylogenesis and compared them with a conventional method based on the use of Gompertz functions.Our results show that eccentricity generated high temporal autocorrelation between successive samples,and that explicitly taking it into account improved both the representativeness of phenology and intra-ring variability.We observed consistent short-term patterns in the model residuals,suggesting the influence of an unaccounted-for environmental variable on cell production.The proposed models offer several advantages over traditional methods,including robust confidence intervals around predictions,consistency with phenology,and reduced sensitivity to extreme observations at the end of the growing season,often linked to eccentric growth.These models also provide a benchmark for mechanistic testing of short-term drivers of wood formation.展开更多
Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and ...Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and finite element analyses.Three tests of the slope deformation under earthquake and post-rainfall earthquakes are first studied using image analysis techniques.Then,based on an elastoplastic constitutive model,numerical simulations are carried out using the finite element method and compared with the centrifuge test results.Finally,a parametric study is performed to clarify the effects of antecedent rainfall on earthquake-induced slope deformation.The results show that slope deformation caused by post-rainfall earthquakes differs from that caused by earthquakes without antecedent rainfall.The seepage flow and soil strength of the slope are affected by previous rainfall conditions,such as intensity and duration,which directly influence the slope deformation caused by the subsequent earthquake.Soil displacement and strain become greater and the slip surface is more noticeable during the post-rainfall earthquake of higher intensity.In addition,the time interval between the rainfall and the earthquake has a considerable impact on the detailed characteristics of the slope deformation,and the significant deformation occurs at the time of lowest soil strength when seepage flow reaches the lower part of the slope.Moreover,the repeated intermittent rainfall greatly affects the subsequent earthquake-induced slope deformation,the main characteristics of which are closely related to the changes in saturation and strength of the slope.However,with the prolonged time gap between each round of rainfall,the earthquake-induced slope deformation becomes insignificant.展开更多
In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicti...In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.展开更多
Mount Kandil is situated in the eastern sector of the EAHP(Eastern Anatolian High Plateau),to the south of the Lesser Caucasus.The mountain lies at the westernmost end of the Aras Mountains,which extends approximately...Mount Kandil is situated in the eastern sector of the EAHP(Eastern Anatolian High Plateau),to the south of the Lesser Caucasus.The mountain lies at the westernmost end of the Aras Mountains,which extends approximately 80 km along a NW-SE axis.With a summit reaching~3214 m(a.s.l.),Mount Kandil is a stratovolcano that,like many other peaks within the EAHP and the Lesser Caucasus,experienced significant environmental changes during Late Pleistocene.Among these,glacial processes stand out as the most profound,having distinctly shaped the mountains geomorphic landscape.This study presents,for the first time,a comprehensive analysis of the glacial morphology of Mount Kandil based on multiple datasets.Field-based morphological observations indicate that an area of approximately 32.62 km^(2)has been sculpted by glacial activity.Within six glaciated regions on Mount Kandil,25 cirques and 6 glacial valleys have been identified.In addition,moraines in various locations exhibit characteristic morphologies.Furthermore,valley glaciers are inferred to have descended to altitudes as low as~2000 m.The paleoequilibrium line(p ELA)was estimated to use AABR method within GIS,yielding a mean pELA of~2730 m.Ice thickness modelling indicates that the thickness of glaciers in the Kandil Mountain valleys reaches up to~350 m.Due to its orographic extension,Mount Kandil is exposed to humid northwest winds and receives substantial frontal precipitation(~686 mm annually).The compiled geomorphic,cartographic and morphometric parameters suggest that the glaciation dynamics of Mount Kandil—situated between the Southeastern Taurus and the Lesser Caucasus—closely resemble those observed in the Lesser Caucasus.This indicates that glaciation was primarily governed by northern atmospheric systems with additional influences from southerly or westerly winds.The integrated data also underscores the role of multiple atmospheric systems in controlling the glaciation regime around the Lesser Caucasus.Additionally,findings on regional pELA question the common belief that pELA increases eastward in EAHP.展开更多
This review highlights advances in inner ear organoids(IEOs)as a novel platform for drug screening and disease modeling,particularly for hearing loss.IEOs,derived from embryonic stem cells,induced pluripotent stem cel...This review highlights advances in inner ear organoids(IEOs)as a novel platform for drug screening and disease modeling,particularly for hearing loss.IEOs,derived from embryonic stem cells,induced pluripotent stem cells,or tissue-specific progenitors,provide a physiologically relevant alternative to traditional animal models.Significant progress has been made in utilizing various cell sources,extracellular matrix materials such as Matrigel and hydrogels,and methods for controlling microenvironments through biochemical and biophysical signals.Applications of IEOs in drug screening,disease modeling,and personalized medicine enable exploration of hearing loss mechanisms and therapeutic testing.However,challenges remain,including the incomplete maturation of cochlear cells and difficulty replicating in vivo environments.Future research should focus on optimizing IEO generation,incorporating microfluidic technologies,and advancing high-throughput screening to enhance drug discovery and clinical translation.展开更多
Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigat...Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.展开更多
A lupuslike condition induced by intraperitoneal administration of pristane(2,6,10,14 tetramethylpentadecane)in mice is widely used as a model of systemic lupus erythematosus(SLE).Due to their phylogenetic distance fr...A lupuslike condition induced by intraperitoneal administration of pristane(2,6,10,14 tetramethylpentadecane)in mice is widely used as a model of systemic lupus erythematosus(SLE).Due to their phylogenetic distance from humans,murine models are not always suitable tool for studying the specific activity of therapeutic agents and the pathogenesis of SLE.In order to overcome speciesspecific limitations of murine models,this approach was tested in nonhuman primates-cynomolgus monkeys(Macaca fascicularis).Two intraperitoneal injections at a dose of 3.5 mL/kg,administered at weeks 1 and 23,recapitulated SLE features,including:production of antinuclear autoantibodies(ANA),membranoproliferative glomerulonephritis with immune complex(IC)deposition in the glomeruli.However,from week 27 five of eight pristanetreated monkeys developed progressive respiratory failure.Two of these died at week 28 and the remaining were euthanized at week 32.The histology of the monkey lungs suggested exogenous lipoid pneumonia.Thus,while pristane induced serological autoimmunity and characteristic renal manifestations in Macaca fascicularis,the consequent lipoid pneumonia limited the observation period and prevented comprehensive evaluation of SLE manifestations beyond 32 weeks.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52075255)the Jiangsu Provincial Science and Technology Plan(Grant No.BZ2023005).
文摘High-volume fraction silicon particle-reinforced aluminium matrix composites(Si/Al)are increasingly applied in aerospace,radar communications,and large-scale integrated circuits because of their superior thermal conductivity,wear resistance,and low thermal expansion coefficient.However,the abrasive and adhesive wear caused by the hard silicon reinforcement and the ductile aluminium matrix leads to significant tool wear,decreased machining efficiency,and compromised surface quality.This study combines theoretical analysis and cutting experiments to investigate polycrystalline diamond(PCD)tool wear during milling of 70 vol%Si/Al composite.A key contribution of this work is the development of a tool wear model that incorporates reinforcement particle characteristics,treating them as ellipsoidal structures,which enhances the accuracy of predicting abrasive and adhesive wear mechanisms.The model is based on abrasive and adhesive wear mechanisms,and can analyze the interaction between silicon particles,aluminium matrix,and tool components,thus providing deeper insights into PCD tool wear processes.Experimental validation of the model shows a good agreement with the results,with a mean deviation of approximately 10%.The findings on the tool wear mechanism reveal that,as tool wear progresses,the proportion of abrasive wear increases from 40%in the running-in stage to 75%in the rapid wear stage,while adhesive wear decreases.The optimal machining parameters of 120 m·min^(–1) cutting speed(v_(c))and 0.04 mm·z^(–1) feed rate(f_(z)),result in tool life of 33 min and surface roughness(S_(a))of 2.2μm.The study uncovers the variation patterns of abrasive and adhesive wear during the tool wear process,and the proposed model offers a robust framework for predicting tool wear during the machining of high-volume fraction Si/Al composites.The research findings also offer key insights for optimizing tool selection and machining parameters,advancing both the theoretical understanding and practical application of PCD tool wear.
基金Supported by National Natural Science Foundation of China(Grant No.51275047)
文摘The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.
基金Supported by the National Science Foundation (Grant Nos. CCF-0727098, IIS-0710819)
文摘As 3D digital photographic and scanning devices produce higher resolution images, acquired geometric data sets grow more complex in terms of the modeled objects＇ size, geometry, and topology. As a consequence, point-sampled geometry is becoming ubiquitous in graphics and geometric information processing, and poses new challenges which have not been fully resolved by the state-of-art graphical techniques. In this paper, we address the challenges by proposing a meshless computational framework for dynamic modeling and simulation of solids and thin-shells represented as point sam- ples. Our meshless framework can directly compute the elastic deformation and fracture propagation for any scanned point geometry, without the need of converting them to polygonal meshes or higher order spline representations. We address the necessary computational techniques, such as Moving Least Squares, Hierarchical Discretization, and Modal Warping, to effectively and efficiently compute the physical simulation in real-time. This meahless computational framework aims to bridge the gap between the point-sampled geometry with physics-based modeling and simulation governed by partial differential equations.
基金Funded by the Chinese National Natural Science Foundation (No.50105013).
文摘A new framework for free-form surface design is proposed. Using manifolds can generalize the spline scheme to surfaces of arbitrary topology. Physics-based modeling incorporate physical laws into shape representation to provide direct shape interaction. The combination presents a new method inherits the attractive properties of the manifold surface as well as that of the physics-based models.
基金the World Climate Research Programme(WCRP),Climate Variability and Predictability(CLIVAR),and Global Energy and Water Exchanges(GEWEX)for facilitating the coordination of African monsoon researchsupport from the Center for Earth System Modeling,Analysis,and Data at the Pennsylvania State Universitythe support of the Office of Science of the U.S.Department of Energy Biological and Environmental Research as part of the Regional&Global Model Analysis(RGMA)program area。
文摘In recent years,there has been an increasing need for climate information across diverse sectors of society.This demand has arisen from the necessity to adapt to and mitigate the impacts of climate variability and change.Likewise,this period has seen a significant increase in our understanding of the physical processes and mechanisms that drive precipitation and its variability across different regions of Africa.By leveraging a large volume of climate model outputs,numerous studies have investigated the model representation of African precipitation as well as underlying physical processes.These studies have assessed whether the physical processes are well depicted and whether the models are fit for informing mitigation and adaptation strategies.This paper provides a review of the progress in precipitation simulation overAfrica in state-of-the-science climate models and discusses the major issues and challenges that remain.
基金supported in part by the National Key Research and Development Program of China(2021YFB2900501)in part by the Shaanxi Science and Technology Innovation Team(2023-CX-TD-03)+3 种基金in part by the Science and Technology Program of Shaanxi Province(2021GXLH-Z-038)in part by the Natural Science Foundation of Hunan Province(2023JJ40607 and 2023JJ50045)in part by the Scientific Research Foundation of Hunan Provincial Education Department(23B0713 and 24B0603)in part by the National Natural Science Foundation of China(62401371,62101275,and 62372070).
文摘(Quasi-)closed-form results for the statistical properties of unmanned aerial vehicle(UAV)airto-ground channels are derived for the first time using a novel spatial-vector-based method from a threedimensional(3-D)arbitrary-elevation one-cylinder model.The derived results include a closed-form expression for the space-time correlation function and some quasi-closed-form ones for the space-Doppler power spectrum density,the level crossing rate,and the average fading duration,which are shown to be the generalizations of those previously obtained from the two-dimensional(2-D)one-ring model and the 3-D low-elevation one-cylinder model for terrestrial mobile-to-mobile channels.The close agreements between the theoretical results and the simulations as well as the measurements validate the utility of the derived channel statistics.Based on the derived expressions,the impacts of some parameters on the channel characteristics are investigated in an effective,efficient,and explicable way,which leads to a general guideline on the manual parameter estimation from the measurement description.
基金support from the National Natural Science Foundation of China(Grant Nos.42277161 and 42230709).
文摘In rock engineering,natural cracks in rock masses subjected to external loads tend to initiate and propagate,leading to potential safety hazards.To investigate the effect of cracking behavior on the mechanical properties of rocks,the cracking processes of pre-cracked rocks have been extensively studied using numerical modeling methods.The peridynamics(PD)exhibits advantages over other numerical methods due to the absence of the requirements for remeshing and external crack growth criterion.However,for modeling pre-cracked rock cracking processes under impact,current PD implementations lack generally applicable rock constitutive models and impact contact models,which leads to difficulties in determining rock material parameters and efficiently calculating impact loads.This paper proposes a non-ordinary state-based peridynamics(NOSBPD)modeling method integrating the Drucker-Prager(DP)plasticity model and an efficient contact model to address the above problems.In the proposed method,the Drucker-Prager plasticity model is integrated into the NOSBPD,thereby equipping NOSBPD with the capability to accurately characterize the nonlinear stress-strain relationship inherent in rocks.An efficient contact model between particles and meshes is designed to calculate the impact loads,which is essentially a coupling method of PD with the finite element method(FEM).The effectiveness of the proposed NOSBPD modeling method is verified by comparison with other numerical methods and experiments.Experimental results indicate that the proposed method can effectively and accurately predict the 3D cracking processes of pre-cracked cracks under impact loading,and the maximum principal stress is the key driver behind wing crack formation in pre-cracked rocks.
基金co-supported by the National Natural Science Foundation of China(Nos.12102034 and 12125201)the Open Fund of State Key Laboratory of Robotics and Systems(HIT),China。
文摘In-space cable-driven manipulators exhibit several advantages,such as a large range of motion,high dexterity,and lightweight structure.However,kinematic and dynamic analysis play an essential role in designing a cable-driven manipulator.In this paper,the kinematic analysis of a type of cable-driven manipulator is performed,and a motion planning scheme is conducted to actuate this manipulator.Moreover,a flexible multi-body dynamic model of a cable-driven manipulator considering the frictional contact between the cables and pulleys is established.To describe properties such as flexibility,vibration,and variable length of the cable,this paper utilizes reducedorder beam elements of the Absolute Nodal Coordinates Formulation(ANCF)in Arbitrary Lagrangian Eulerian(ALE)framework.Additionally,a virtual element is introduced to model the contact segment in the cable-pulley system.A tension decay factor is employed to account for the friction in the contact segment.To validate the proposed method,a semi-analytical model based on D'Alembert's principle is established.Cross-verification is performed to validate the accuracy of both models.The model is further applied to simulate the rotation of the cable-driven manipulator with different structural parameters and frictional factors.The results from the analyses provide valuable guidance for the design and motion control of the in-space cable-driven manipulator.Finally,a prototype of a single module is manufactured and tested.Ground experiments are carried out to verify the kinematic and dynamic models.
基金the funding support from the Smart Medicine and Engineering Interdisciplinary Innovation Project of Ningbo University(No.ZHYG003)。
文摘Glassy polymers are widely used in biomedical applications in a solvent environment,yet their long-term performance is governed by the competing effects of physical aging and solvent-induced plasticization.Here,we develop a constitutive model that explicitly couples the solvent concentration,structural relaxation,and mechanical response.This framework is built on a multiplicative decomposition of deformation and an Eyring-type flow rule,with structural evolution described by an effective temperature.A generalized shift factor is introduced to quantify how the solvent concentration and effective temperature jointly affect the relaxation time,thereby integrating physical aging and plasticization.The model is subsequently applied to methacrylate(MA)-based copolymer networks immersed in phosphate-buffered saline for up to nine months.Simulations accurately capture key experimental features,including the strong softening of highly swellable networks,the partial recovery due to aging,and the mitigating role of hydrophobic crosslinking in reducing solvent uptake.While the current single-mode description cannot reproduce the full relaxation spectrum,it establishes an efficient framework for predicting the long-term mechanical performance under coupled environmental and mechanical loading.This study provides a constitutive description of solvent-swollen glassy polymers,offering mechanistic insight into the interplay between plasticization and aging.Beyond biomedical MA networks,this framework establishes a foundation for predicting the long-term performance of polymer glasses under coupled aqueous environmental and mechanical loading.
基金supported by the National Key Research and Development Program of China (No. 2024YFA1308200)the National Natural Science Foundation of China (Nos. 82274009 and81973556)。
文摘Huperzine A(HupA) is a highly selective, reversible acetylcholinesterase(AChE) inhibitor that exhibits neuroprotective effects and is clinically used to manage benign memory decline.However, the specific relationship between the pharmacokinetic(PK) profile of HupA and cerebral acetylcholine(ACh) dynamics remains poorly characterized. Here, we characterize the PK-pharmacodynamic(PD) properties of HupA in rats under both physiological and pathological conditions. Following a single intramuscular injection, HupA exhibits a short halflife but rapid brain penetration, while multiple dosing significantly enhances its brain exposure. In a middle cerebral artery occlusion(MCAO) rat model, HupA demonstrates increased brain distribution. Furthermore, HupA elevates ACh concentrations across multiple brain regions, concurrently modulating several monoamine neurotransmitters. Using a minimal physiologically based pharmacokinetic-pharmacodynamic(mPBPK-PD) modeling approach,cerebral ACh dynamics were accurately predicted based on the pharmacokinetics of HupA in systemic circulation. The developed mPBPK-PD model exhibits robust predictive performance and holds potential for guiding the optimization of clinical dosing regimens and improving the therapeutic efficacy of HupA.
基金output of a research project implemented as part of the Basic Research Program at HSE University。
文摘Activation pruning reduces neural network complexity by eliminating low-importance neuron activations,yet identifying the critical pruning threshold—beyond which accuracy rapidly deteriorates—remains computationally expensive and typically requires exhaustive search.We introduce a thermodynamics-inspired framework that treats activation distributions as energy-filtered physical systems and employs the free energy of activations as a principled evaluation metric.Phase-transition-like phenomena in the free-energy profile—such as extrema,inflection points,and curvature changes—yield reliable estimates of the critical pruning threshold,providing a theoretically grounded means of predicting sharp accuracy degradation.To further enhance efficiency,we propose a renormalized free energy technique that approximates full-evaluation free energy using only the activation distribution of the unpruned network.This eliminates repeated forward passes,dramatically reducing computational overhead and achieving speedups of up to 550×for MLPs.Extensive experiments across diverse vision architectures(MLP,CNN,ResNet,MobileNet,Vision Transformer)and text models(LSTM,BERT,ELECTRA,T5,GPT-2)on multiple datasets validate the generality,robustness,and computational efficiency of our approach.Overall,this work establishes a theoretically grounded and practically effective framework for activation pruning,bridging the gap between analytical understanding and efficient deployment of sparse neural networks.
基金supported by the National Natural Science Foundation of China(Grant No.12272018)the National Key Basic Research Project(2022JCJQZD20600).
文摘Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.
基金supported by the Discovery Grants program of the Natural Sciences and Engineering Research Council of Canada(No.RGPIN-2021-03553)the Canadian Research Chair in dendroecology and dendroclimatology(CRC-2021-00368)+3 种基金the Ministère des Ressources Naturelles et des Forèts(MRNF,Contract no.142332177-D)the Natural Sciences and Engineering Research Council of Canada(Alliance Grant No.ALLRP 557148-20,obtained in partnership with the MRNF and Resolute Forest Products)the Fonds de recherche du Qu ebec–Nature et technologies(Partnership Research Program on the Contribution of the Forestry Sector to Climate Change MitigationGrant No.2022-0FC-309064)。
文摘Xylogenesis,the process through which wood cells are formed,results in the long-term storage of carbon in woody biomass,making it a key component of the global carbon cycle.Understanding how environmental drivers influence xylogenesis during the growing season is therefore of great interest.However,studying shortterm drivers of wood production using xylogenetic data is complicated by the usual sampling scheme and the influence of eccentric growth,i.e.,heterogeneous growth around the stem.In this study,we improve xylogenesis research by introducing a statistical approach that explicitly considers seasonal phenology,short-term growth rates,and growth eccentricity.To this end,we developed Bayesian models of xylogenesis and compared them with a conventional method based on the use of Gompertz functions.Our results show that eccentricity generated high temporal autocorrelation between successive samples,and that explicitly taking it into account improved both the representativeness of phenology and intra-ring variability.We observed consistent short-term patterns in the model residuals,suggesting the influence of an unaccounted-for environmental variable on cell production.The proposed models offer several advantages over traditional methods,including robust confidence intervals around predictions,consistency with phenology,and reduced sensitivity to extreme observations at the end of the growing season,often linked to eccentric growth.These models also provide a benchmark for mechanistic testing of short-term drivers of wood formation.
基金supported by the China Postdoctoral Science Foundation(CPSF)(Grant No.2024M762769)the Natural Science Basic Research Program of Shaanxi(Grant No.2024JC-YBQN-0333)the Postdoctoral Fellowship Program of CPSF(Grant No.GZC20232230).
文摘Slopes are likely to fail in areas with frequent rainfall and earthquakes.The deformation characteristics of unsaturated slopes subjected to post-rainfall earthquakes are investigated using centrifuge model tests and finite element analyses.Three tests of the slope deformation under earthquake and post-rainfall earthquakes are first studied using image analysis techniques.Then,based on an elastoplastic constitutive model,numerical simulations are carried out using the finite element method and compared with the centrifuge test results.Finally,a parametric study is performed to clarify the effects of antecedent rainfall on earthquake-induced slope deformation.The results show that slope deformation caused by post-rainfall earthquakes differs from that caused by earthquakes without antecedent rainfall.The seepage flow and soil strength of the slope are affected by previous rainfall conditions,such as intensity and duration,which directly influence the slope deformation caused by the subsequent earthquake.Soil displacement and strain become greater and the slip surface is more noticeable during the post-rainfall earthquake of higher intensity.In addition,the time interval between the rainfall and the earthquake has a considerable impact on the detailed characteristics of the slope deformation,and the significant deformation occurs at the time of lowest soil strength when seepage flow reaches the lower part of the slope.Moreover,the repeated intermittent rainfall greatly affects the subsequent earthquake-induced slope deformation,the main characteristics of which are closely related to the changes in saturation and strength of the slope.However,with the prolonged time gap between each round of rainfall,the earthquake-induced slope deformation becomes insignificant.
基金funded by the National Natural Science Foundation of China(Nos.52004098,U24B2041,and 52274079)the Key Research and Development Program of Henan Province(No.251111320400)+1 种基金the Key Research Project Plan for Higher Education Institutions in Henan Province(Nos.24A570006 and 25A570002)the Scientific and Technological Research Project in Henan Province(No.242102320061).
文摘In deep coal mining,surrounding rock is subjected to both high in-situ stress and intense mining disturbances,leading to significant time-dependent behavior.Accurately capturing this behavior is essential for predicting long-term roadway stability,necessitating the development of a reliable constitutive creep model and numerical simulation approach.In this study,creep experiments were conducted on pre-damaged rock with varying initial damage levels to investigate the time-dependent mechanical properties.Based on the experimental results,an accelerated-creep criterion was proposed,and an elastic-viscoplastic creep damage model(EVPCD)was established that simultaneously considers the effects of time-dependent damage and instantaneous damage caused by stress disturbances on rock creep behavior.Subsequently,the effectiveness of the proposed creep model was verified using experimental data,and the secondary development of the EVPCD model was completed based on the FLAC3D platform.Following this,a long-term stability analysis method of deep surrounding rock that accounts for excavation-and mining-induced disturbances was proposed.Using the main roadway of Xutuan Coal Mine as a case study,numerical simulations were carried out to investigate the time-dependent deformation and failure characteristics of the surrounding rock following excavation and mining disturbance.Combined with on-site monitoring of the surrounding rock damage areas,the results indicate that the EVPCD outperforms the CVISC and Nishihara models in predicting the time-dependent behavior of deep surrounding rock.
基金supported by Van Yüzüncü Yıl University,Scientific Research Projects Coordination Unit(Project No:SDK-2025-11935)Van Yüzüncü Yıl University,Scientific Research Projects Coordination Unit for supporting the study。
文摘Mount Kandil is situated in the eastern sector of the EAHP(Eastern Anatolian High Plateau),to the south of the Lesser Caucasus.The mountain lies at the westernmost end of the Aras Mountains,which extends approximately 80 km along a NW-SE axis.With a summit reaching~3214 m(a.s.l.),Mount Kandil is a stratovolcano that,like many other peaks within the EAHP and the Lesser Caucasus,experienced significant environmental changes during Late Pleistocene.Among these,glacial processes stand out as the most profound,having distinctly shaped the mountains geomorphic landscape.This study presents,for the first time,a comprehensive analysis of the glacial morphology of Mount Kandil based on multiple datasets.Field-based morphological observations indicate that an area of approximately 32.62 km^(2)has been sculpted by glacial activity.Within six glaciated regions on Mount Kandil,25 cirques and 6 glacial valleys have been identified.In addition,moraines in various locations exhibit characteristic morphologies.Furthermore,valley glaciers are inferred to have descended to altitudes as low as~2000 m.The paleoequilibrium line(p ELA)was estimated to use AABR method within GIS,yielding a mean pELA of~2730 m.Ice thickness modelling indicates that the thickness of glaciers in the Kandil Mountain valleys reaches up to~350 m.Due to its orographic extension,Mount Kandil is exposed to humid northwest winds and receives substantial frontal precipitation(~686 mm annually).The compiled geomorphic,cartographic and morphometric parameters suggest that the glaciation dynamics of Mount Kandil—situated between the Southeastern Taurus and the Lesser Caucasus—closely resemble those observed in the Lesser Caucasus.This indicates that glaciation was primarily governed by northern atmospheric systems with additional influences from southerly or westerly winds.The integrated data also underscores the role of multiple atmospheric systems in controlling the glaciation regime around the Lesser Caucasus.Additionally,findings on regional pELA question the common belief that pELA increases eastward in EAHP.
基金supported by the National Natural Science Foundation of China(82222017 and 82271183)Hubei Province’s Key Research and Development Program(2022BCA046)the Start-up Research Fund of Southeast University(RF1028623028).
文摘This review highlights advances in inner ear organoids(IEOs)as a novel platform for drug screening and disease modeling,particularly for hearing loss.IEOs,derived from embryonic stem cells,induced pluripotent stem cells,or tissue-specific progenitors,provide a physiologically relevant alternative to traditional animal models.Significant progress has been made in utilizing various cell sources,extracellular matrix materials such as Matrigel and hydrogels,and methods for controlling microenvironments through biochemical and biophysical signals.Applications of IEOs in drug screening,disease modeling,and personalized medicine enable exploration of hearing loss mechanisms and therapeutic testing.However,challenges remain,including the incomplete maturation of cochlear cells and difficulty replicating in vivo environments.Future research should focus on optimizing IEO generation,incorporating microfluidic technologies,and advancing high-throughput screening to enhance drug discovery and clinical translation.
文摘Hepatitis B Virus(HBV)infection and heavy alcohol consumption are the two primary pathogenic causes of liver cirrhosis.In this paper,we proposed a deterministic mathematical model and a logistic equation to investigate the dynamics of liver cirrhosis progression as well as to explain the implications of variations in alcohol consumption on chronic hepatitis B patients,respectively.The intricate interactions between liver cirrhosis,recovery,and treatment dynamics are captured by the model.This study aims to show that alcohol consumption by Hepatitis B-infected individuals accelerates liver cirrhosis progression while treatment of acutely infected individuals reduces it.We proved that a unique solution of the proposed model exists,which is positive and bounded.Using the next-generation matrix approach,two basic reproductive numbers R_(A_(0))and R_(A_(max))are calculated to identify future recurrence.The equilibrium points are calculated,and both equilibria are proved locally and globally asymptotically stable when R_(0)is below and above one,respectively.It is shown that bifurcation exists at R_(0)=1 and a detailed proof for forward bifurcation is given.Furthermore,we performed the sensitivity analysis of the model parameters on R_(0).For the confirmation of analytical work,we performed numerical simulations,and the results indicate that the treatment and the inhibitory effects reduce the risk of developing liver cirrhosis in individuals,while heavy alcohol consumption accelerates markedly the liver cirrhosis progression in patients with chronic hepatitis B.
文摘A lupuslike condition induced by intraperitoneal administration of pristane(2,6,10,14 tetramethylpentadecane)in mice is widely used as a model of systemic lupus erythematosus(SLE).Due to their phylogenetic distance from humans,murine models are not always suitable tool for studying the specific activity of therapeutic agents and the pathogenesis of SLE.In order to overcome speciesspecific limitations of murine models,this approach was tested in nonhuman primates-cynomolgus monkeys(Macaca fascicularis).Two intraperitoneal injections at a dose of 3.5 mL/kg,administered at weeks 1 and 23,recapitulated SLE features,including:production of antinuclear autoantibodies(ANA),membranoproliferative glomerulonephritis with immune complex(IC)deposition in the glomeruli.However,from week 27 five of eight pristanetreated monkeys developed progressive respiratory failure.Two of these died at week 28 and the remaining were euthanized at week 32.The histology of the monkey lungs suggested exogenous lipoid pneumonia.Thus,while pristane induced serological autoimmunity and characteristic renal manifestations in Macaca fascicularis,the consequent lipoid pneumonia limited the observation period and prevented comprehensive evaluation of SLE manifestations beyond 32 weeks.
