Organic photovoltaics(OPVs)have achieved remarkable progress,with laboratory-scale single-junction devices now demonstrating power conversion efficiencies(PCEs)exceeding 20%.However,these efficiencies are highly depen...Organic photovoltaics(OPVs)have achieved remarkable progress,with laboratory-scale single-junction devices now demonstrating power conversion efficiencies(PCEs)exceeding 20%.However,these efficiencies are highly dependent on the thickness of the photoactive layer,which is typically around 100 nm.This sensitivity poses a challenge for industrial-scale fabrication.Achieving high PCEs in thick-film OPVs is therefore essential.This review systematically examines recent advancements in thick-film OPVs,focusing on the fundamental mechanisms that lead to efficiency loss and strategies to enhance performance.We provide a comprehensive analysis spanning the complete photovoltaic process chain:from initial exciton generation and diffusion dynamics,through dissociation mechanisms,to subsequent charge-carrier transport,balance optimization,and final collection efficiency.Particular emphasis is placed on cutting-edge solutions in molecular engineering and device architecture optimization.By synthesizing these interdisciplinary approaches and investigating the potential contributions in stability,cost,and machine learning aspects,this work establishes comprehensive guidelines for designing high-performance OPVs devices with minimal thickness dependence,ultimately aiming to bridge the gap between laboratory achievements and industrial manufacturing requirements.展开更多
The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials off...The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials offer unique advantages in photovoltaics due to their tunable optoelectronic properties,high surface area and efficient charge transport capabilities.This review explores recent progress in photovoltaics incorporating 2D materials,focusing on their application as hole and electron transport layers to optimize bandgap alignment,enhance carrier mobility and improve chemical stability.A comprehensive analysis is presented on perovskite solar cells utilizing 2D materials,with a particular focus on strategies to enhance crystallization,passivate defects and improve overall cell efficiency.Additionally,the application of 2D materials in organic solar cells is examined,particularly for reducing recombination losses and enhancing charge extraction through work function modification.Their impact on dye-sensitized solar cells,including catalytic activity and counter electrode performance,is also explored.Finally,the review outlines key challenges,material limitations and performance metrics,offering insight into the future development of nextgeneration photovoltaic devices encouraged by 2D materials.展开更多
Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.Th...Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.展开更多
Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shif...Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shift towards the utilization of solar energy.However,traditional solar energy solutions often require extensive spaces for a panel installation,limiting their practicality in a dense urban environment.To overcome the spatial constraint,researchers have developed transparent photovoltaics(TPV),enabling windows and facades in vehicles and buildings to generate electric energy.Current TPV advancements are focused on improving both transparency and power output to rival commercially available silicon solar panels.In this review,we first briefly introduce wavelength-and non-wavelengthselective strategies to achieve transparency.Figures of merit and theoretical limits of TPVs are discussed to comprehensively understand the status of current TPV technology.Then we highlight recent progress in different types of TPVs,with a particular focus on solution-processed thin-film photovoltaics(PVs),including colloidal quantum dot PVs,metal halide perovskite PVs and organic PVs.The applications of TPVs are also reviewed,with emphasis on agrivoltaics,smart windows and facades.Finally,current challenges and future opportunities in TPV research are pointed out.展开更多
In this study,we explore an innovative approach to enhancing the photovoltaic performance of organic solar cells through core fluorination of the non-fullerene acceptor.We developed a benzotriazole-based non-fullerene...In this study,we explore an innovative approach to enhancing the photovoltaic performance of organic solar cells through core fluorination of the non-fullerene acceptor.We developed a benzotriazole-based non-fullerene acceptor with a trifluorinated phenyl side chain,referred to as YNPF3,which has a significant impact on the molecular properties,including a surprisingly varied local dipole moment and crystalline nature,as well as effectively stabilizing the frontier molecular orbital energy levels.Furthermore,a trifluorophenyl-based non-fullerene acceptor exhibits enhanced absorptivity,restricted voltage loss,and favorable photoactive morphology compared with its methyl side chain counterpart non-fullerene acceptor.Consequently,a binary organic solar cell based on YNPF3 achieves an outstanding power conversion efficiency of 19.2%,surpassing the control device with a efficiency of 16.5%.Finally,the YNPF3-based organic solar cell presents an impressive power conversion efficiency of 16.6%in a mini-module device with an aperture size of 12.5 cm^(2),marking the highest reported efficiency for series-connected binary organic solar cells with a photoactive area over 10 cm^(2).展开更多
Semitransparent organic photovoltaics(ST-OPVs)for building integration represent a pivotal direction in the development of photovoltaic industry.Solution-processed silver nanowires(AgNWs)are considered promising candi...Semitransparent organic photovoltaics(ST-OPVs)for building integration represent a pivotal direction in the development of photovoltaic industry.Solution-processed silver nanowires(AgNWs)are considered promising candidates for transparent electrodes in semitransparent devices due to their high transparency-conductivity-efficiency merit,large-scale processability,and low cost.In this work,we develop two solution-processed organic–inorganic hybrid electrodes,named AgNWs-PD and AgNWsPC,utilizing AgNWs as the conductive framework and aliphatic amine-functionalized perylene-diimide(PDINN)as the sandwiched material,while AgNWs-PC exhibits significantly improved electrical conductivity and enhanced contact area with the underlying electron transport layer.The optimized device achieves a power conversion efficiency of 9.45%with an open circuit voltage of 0.846 V,a high filling factor of 75.4%,and an average visible transmittance(AVT)of 44.0%,delivering an outstanding light utilization efficiency(LUE)of 4.16%,which is the highest reported value for all solution-processed ST-OPVs.In addition,by coupling a 30-nm tellurium dioxide atop AgNWs-PC,the bifaciality factor of derivative devices improves from 73.7%to 99.4%,while maintaining a high bifacial LUE over 3.7%.Our results emphasize the superiority and effectiveness of PDINN-sandwiched AgNWs electrodes for highperformance and all solution-processed ST-OPVs.展开更多
In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and ba...In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and balancing a large number of loads nearby.However,under the background of a large-scale DPV grid-connected to the county distribution network,an effective analysis method is needed to analyze its impact on the voltage of the distribution network in the early development stage of DPV.Therefore,a DPV orderly grid-connected method based on photovoltaics grid-connected order degree(PGOD)is proposed.This method aims to orderly analyze the change of voltage in the distribution network when large-scale DPV will be connected.Firstly,based on the voltagemagnitude sensitivity(VMS)index of the photovoltaics permitted grid-connected node and the acceptance of grid-connected node(AoGCN)index of other nodes in the network,thePGODindex is constructed to determine the photovoltaics permitted grid-connected node of the current photovoltaics grid-connected state network.Secondly,a photovoltaics orderly grid-connected model with a continuous updating state is constructed to obtain an orderly DPV grid-connected order.The simulation results illustrate that the photovoltaics grid-connected order determined by this method based on PGOD can effectively analyze the voltage impact of large-scale photovoltaics grid-connected,and explore the internal factors and characteristics of the impact.展开更多
Conventional concentrator photovoltaics(CPV)face a persistent trade-off between high efficiency and high cost,driven by expensive multi-junction solar cells and complex active cooling systems.This study presents a com...Conventional concentrator photovoltaics(CPV)face a persistent trade-off between high efficiency and high cost,driven by expensive multi-junction solar cells and complex active cooling systems.This study presents a computational investigation of a novel Multi-Focal Pyramidal Array(MFPA)-based CPV system designed to overcome this limitation.The MFPA architecture employs a geometrically optimized pyramidal concentrator to distribute concen-trated sunlight onto strategically placed,low-cost monocrystalline silicon cells,enabling high efficiency energy capture while passively managing thermal loads.Coupled optical thermal electrical simulations in COMSOL Multiphysics demonstrate a geometric concentration ratio of 120×,with system temperatures maintained below 110℃ under standard 1000 W/m2 Direct Normal Irradiance(DNI).Ray tracing confirms 95%optical efficiency and a concentrated light spot radius of 2.48 mm.Compared with conventional CPV designs,the MFPA improves power-per-cost by 25%and reduces tracking requirements by 50%owing to its wide±15°acceptance angle.These results highlight the MFPA’s potential as a scalable,low-cost,and energy-efficient pathway for expanding solar power generation.展开更多
Embedding a third and/or fourth component into a binary blend active layer of organic photovoltaics (OPVs) is a promising approach to achieve high-performance photovoltaic cells and modules. This multicomponent strate...Embedding a third and/or fourth component into a binary blend active layer of organic photovoltaics (OPVs) is a promising approach to achieve high-performance photovoltaic cells and modules. This multicomponent strategy favors absorption broadening via additional components. Quaternary OPV (QOPV) blends have four components in three possible configurations: (i) a donor and three acceptors, (ii) two donors and two acceptors, or (iii) three donors and an acceptor. Although quaternary systems have only been relatively recently studied compared to other systems in OPVs, leveraging the synergistic effects of the four components leads to record power conversion efficiencies, currently approaching 20%. QOPVs provide ample material choices for compatibility and channels for charge transfer mechanisms, possibly leading to optimized morphology and orientation. Reviewing recent progress in advancing QOPVs is essential for understanding their contribution to the OPV field. The review mainly discusses research progress in QOPVs with a keen interest in their various configurations, semitransparency, and outdoor and indoor applications. It describes the not-well-understood QOPV's general working mechanism. This review explores high-performance QOPVs based on the fourth component's contribution as a donor, acceptor, or dye molecule and beyond in photovoltaic applications. Finally, there is a discussion around QOPV's outlook and projected future research directions in this field. This review intends to provide an overview of the quaternary systems approach to OPVs and inform current and future researchers on investigating the full spectrum of OPVs.展开更多
With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the pr...With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.展开更多
Indoor photovoltaics have attracted increasing attentions owing to their great potential in supplying energy for low power devices under indoor light in our daily life.The third generation thin-film solar cells,includ...Indoor photovoltaics have attracted increasing attentions owing to their great potential in supplying energy for low power devices under indoor light in our daily life.The third generation thin-film solar cells,including dye-sensitized solar cells,perovskite solar cells and organic solar cells,have made rapid progress from the aspect of materials design to photovoltaic performance.This review provides an overview on the recent advances in the development of indoor photovoltaic technologies based on the third generation solar cells.The design principles of advanced thin-film indoor photovoltaics were also summarized according to the characteristics of indoor light and the advantages of the third generation solar cells.Finally,after summarizing the current research progress,the perspective on this topic is provided.展开更多
Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of pero...Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.展开更多
A full-duplex radiant energy converter based on both betavoltaic and photovoltaic effects in an easyto-implement way is an attractive alternative for the autonomous wireless sensor microsystem.Here,we report a novel b...A full-duplex radiant energy converter based on both betavoltaic and photovoltaic effects in an easyto-implement way is an attractive alternative for the autonomous wireless sensor microsystem.Here,we report a novel beta/photovoltaic cell based on free-standing Zn O nanorod arrays(ZNRAs)modified with metallic single-walled carbon nanotubes(m-SWCNTs),using radioisotope63 Ni as beta-emitting source.The ZNRAs were grown on Al-doped Zn O(AZO)conductive glass using hydrothermal method.The optimum length and diameter of Zn O nanorods were determined by Monte Carlo simulation for beta energy deposition in ZNRAs.The m-SWCNTs were anchored into the ZNRAs to form a three-dimensional(3-D)Schottky junction structure for effectively separating the beta/photo-excited electron-hole pairs.Experimentally,the betavoltaic and photovoltaic effects were confirmed through the I-V measurements of beta/photovoltaic cells under beta/UV/Vis irradiations,respectively.It is suggested that the m-SWCNTs play key role for the enhancement of beta/photovoltaic performance through the formation of extensive3-D Schottky junction,the conductive network for hole transport,and the surface plasmon resonance exciton absorption for visible light.展开更多
The mismatch between the photovoltaic(PV)cells absorption and the solar irradiance on earth is one of the major limitations towards more efficient PV energy conversion.This aspect was addressed by downshifting the sol...The mismatch between the photovoltaic(PV)cells absorption and the solar irradiance on earth is one of the major limitations towards more efficient PV energy conversion.This aspect was addressed by downshifting the solar irradiance on Earth through luminescent down-shifting layers based on lanthanidedoped surface-functionalized ionosilicas(ISs)embedded in poly(methyl methacrylate)(PMMA)coated on the surface of commercial Si-based PV cells.The IS-PMMA hybrid materials exhibit efficient solar radiation harvesting(spectral overlap of^9.5×10^19 photons/(s·m2))and conversion(quantum yield^52%).The direct solar radiation and the down-shifted radiation are partially guided and lost through total internal reflection to the layer edges being unavailable for PV conversion of the coated PV cell.By tuning the down-shifting layer thickness,it also acts as luminescent solar concentrator enabling the collection of the guided radiation by flexible PV cells applied on the borders of the down-shifting layer leading to an enhancement of the PV energy conversion from^5%(in the case of the single-use of the luminescent down-shifting layer)to^13%comparing with the bare PV cell.The overall electrical output of the device resulted in an absolute external quantum efficiency increase of^32%for the optimized Eu^3+-based films in the UV spectral region(compared with the bare PV device,which is among the best values reported so far).展开更多
Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their...Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their mass scale production is the debatable inferior stability of organic photovoltaic devices in comparison to other technologies.Adequate donor/acceptor morphology of the active layer is required to provide carrier separation and transport to the electrodes. Unfortunately, the beneficial morphology for device performance is usually a kinetically frozen state which has not reached thermodynamic equilibrium. During the last 5 years, special efforts have been dedicated to isolate the effects related to morphology changes taking place within the active layer and compare to those affecting the interfaces with the external electrodes. The current review discusses some of the factors affecting the donor/acceptor morphology evolution as one of the major intrinsic degradation pathways. Special attention is paid to factors in the nano- and microscale domain.For example, phase segregation of the polymer and fullerene domains due to Ostwald ripening is a major factor in the microscale domain and is affected by the presence of additives, glass transition temperature of the polymers or use of crosslinkers in the active layer. Alternatively, the role of vertical segregation profile toward the external electrodes is key for device operation, being a clear case of nanoscale morphology evolution. For example, donor and acceptor molecules actually present at the external interfaces will determine the leakage current of the device, energy-level alignment, and interfacial recombination processes. Different techniques have been developed over the last few years to understand its relationship with the device efficiency. Of special interest are those techniques which enable in situ analysis being nondestructive as they can be used to study accelerated degradation experiments and some will be discussed here.展开更多
Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 h...Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 have the similar optical bandgap and different absorption coefficients.The corresponding binary SMPVs exhibit different short circuit current density(/sc)(20.38 vs.23.24 mA cm^(-2)),and fill factor(FF)(70.77% vs.67.21%).A 14.46% power conversion efficiency(PCE) is acquired in ternary SMPVs with 30 wt% Y6,companied with a JSC of 24.17 mA cm^(-2) a FF of 68.78% and an open circuit voltage(Voc) of 0.87 V.The improvement on PCE of ternary SMPVs should originate from the well trade-off between phase separation and photon harvesting of ternary active layers by incorporating 30 wt% Y6 in acceptors.This work may deliver insight onto the improved performance of SMPVs by superposing the superiorities of binary SMPVs with similar optical bandgap acceptors into one ternary cell.展开更多
A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar...A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar panels, while the gap between the energy demand and supply is solved by the FC that is powered by the H2 produced by water electrolysis with surplus power of PV. A desktop case study of using the proposed system in Tsu city which is located in central part of Japan, has been conducted. The results found that the self-sufficiency rates of PV system to electricity demand of households (RPV) during the daytime in April and July are higher than those in January and October. The results also reveal that the self-sufficiency rate of FC system to the electricity demand (RFC) is 15% - 38% for the day when the mean amount of horizontal solar radiation is obtained in January, April, July and October. In addition, it is found the optimum tilt angle of solar panel installed on the roof of the buildings should be 0 degree, i.e., placed horizontally.展开更多
Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteris...Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteristics of an ideal manufacturing process such as compatibility with roll-to-roll production processes,tunability and uniformity of droplet size,capability of operating at atmospheric pressure,and negligible material waste and nano structures.This review begins with an introduction of the fundamentals and unique properties of electrospray.We put emphasis on the evaporation time and residence time that jointly affect the deposition outcome.Then we review the efforts of electrospray printing polymer solar cells,perovskite solar cells,and dye sensitized solar cells.Collectively,these results demonstrate the advantages of electrospray for solution processed PV.Electrospray has also exhibited the capability of producing uniform films as well as nanostructured and even multiscale films.So far,the electrospray has been found to improve active layer morphology,and create devices with efficiencies comparable with that of spin-coating.Finally,we discuss challenges and research opportunities that enable electrospray to become a mainstream technique for industrial scale production.展开更多
Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at th...Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.展开更多
In this article, we discuss the leading thin-film photovoltaic （PV） technology based on the Cu（ln,Ga）Se2 （CIGS） compound semiconductor. This contribution includes a general comparison with the conventional Si-wa...In this article, we discuss the leading thin-film photovoltaic （PV） technology based on the Cu（ln,Ga）Se2 （CIGS） compound semiconductor. This contribution includes a general comparison with the conventional Si-wafer-based PV technology and discusses the basics of the CIGS technology as well as advances in world-record-level conversion efficiency, production, applications, stability, and future developments with respect to a flexible product. Once in large-scale mass production, the CIGS technology has the highest potential of all PV technologies for cost-efficient clean energy generation.展开更多
基金supported by Natural Science Foundation of Zhejiang Province(Nos.LQ23E030002,LZ23B040001)the National Natural Science Foundation of China(Nos.52303226,21971049)L.Zhan acknowledges the research start-up fund from Hangzhou Normal University(4095C50222204002).
文摘Organic photovoltaics(OPVs)have achieved remarkable progress,with laboratory-scale single-junction devices now demonstrating power conversion efficiencies(PCEs)exceeding 20%.However,these efficiencies are highly dependent on the thickness of the photoactive layer,which is typically around 100 nm.This sensitivity poses a challenge for industrial-scale fabrication.Achieving high PCEs in thick-film OPVs is therefore essential.This review systematically examines recent advancements in thick-film OPVs,focusing on the fundamental mechanisms that lead to efficiency loss and strategies to enhance performance.We provide a comprehensive analysis spanning the complete photovoltaic process chain:from initial exciton generation and diffusion dynamics,through dissociation mechanisms,to subsequent charge-carrier transport,balance optimization,and final collection efficiency.Particular emphasis is placed on cutting-edge solutions in molecular engineering and device architecture optimization.By synthesizing these interdisciplinary approaches and investigating the potential contributions in stability,cost,and machine learning aspects,this work establishes comprehensive guidelines for designing high-performance OPVs devices with minimal thickness dependence,ultimately aiming to bridge the gap between laboratory achievements and industrial manufacturing requirements.
基金supported by the IITP(Institute of Information & Communications Technology Planning & Evaluation)-ITRC(Information Technology Research Center) grant funded by the Korea government(Ministry of Science and ICT) (IITP-2025-RS-2024-00437191, and RS-2025-02303505)partly supported by the Korea Basic Science Institute (National Research Facilities and Equipment Center) grant funded by the Ministry of Education. (No. 2022R1A6C101A774)the Deanship of Research and Graduate Studies at King Khalid University, Saudi Arabia, through Large Research Project under grant number RGP-2/527/46
文摘The growing global energy demand and worsening climate change highlight the urgent need for clean,efficient and sustainable energy solutions.Among emerging technologies,atomically thin two-dimensional(2D)materials offer unique advantages in photovoltaics due to their tunable optoelectronic properties,high surface area and efficient charge transport capabilities.This review explores recent progress in photovoltaics incorporating 2D materials,focusing on their application as hole and electron transport layers to optimize bandgap alignment,enhance carrier mobility and improve chemical stability.A comprehensive analysis is presented on perovskite solar cells utilizing 2D materials,with a particular focus on strategies to enhance crystallization,passivate defects and improve overall cell efficiency.Additionally,the application of 2D materials in organic solar cells is examined,particularly for reducing recombination losses and enhancing charge extraction through work function modification.Their impact on dye-sensitized solar cells,including catalytic activity and counter electrode performance,is also explored.Finally,the review outlines key challenges,material limitations and performance metrics,offering insight into the future development of nextgeneration photovoltaic devices encouraged by 2D materials.
文摘Correction to:Nano-Micro Letters(2026)18:10.https://doi.org/10.1007/s40820-025-01852-8 Following publication of the original article[1],the authors reported that the last author’s name was inadvertently misspelled.The published version showed“Hongzhen Chen”,whereas the correct spelling should be“Hongzheng Chen”.The correct author name has been provided in this Correction,and the original article[1]has been corrected.
基金supported by the National Natural Science Foundation of China(Grant number W2432035)financial support from the EPSRC SWIMS(EP/V039717/1)+3 种基金Royal Society(RGS\R1\221009 and IEC\NSFC\211201)Leverhulme Trust(RPG-2022-263)Ser Cymru programme–Enhancing Competitiveness Equipment Awards 2022-23(MA/VG/2715/22-PN66)the financial support from Kingdom of Saudi Arabia Ministry of Higher Education.
文摘Electrical energy is essential for modern society to sustain economic growths.The soaring demand for the electrical energy,together with an awareness of the environmental impact of fossil fuels,has been driving a shift towards the utilization of solar energy.However,traditional solar energy solutions often require extensive spaces for a panel installation,limiting their practicality in a dense urban environment.To overcome the spatial constraint,researchers have developed transparent photovoltaics(TPV),enabling windows and facades in vehicles and buildings to generate electric energy.Current TPV advancements are focused on improving both transparency and power output to rival commercially available silicon solar panels.In this review,we first briefly introduce wavelength-and non-wavelengthselective strategies to achieve transparency.Figures of merit and theoretical limits of TPVs are discussed to comprehensively understand the status of current TPV technology.Then we highlight recent progress in different types of TPVs,with a particular focus on solution-processed thin-film photovoltaics(PVs),including colloidal quantum dot PVs,metal halide perovskite PVs and organic PVs.The applications of TPVs are also reviewed,with emphasis on agrivoltaics,smart windows and facades.Finally,current challenges and future opportunities in TPV research are pointed out.
基金supported by the National Research Foundation(NRF)(NRF-2021R1A2C2091787)by the Technology Innovation Program(RS-2024-00422305)+1 种基金funded by the Ministry of Trade,Industry&Energy,by the National Research Council of Science and Technology(Grant No.Global-23-007)by the Korea Research Institute of Chemical Technology(KRICT)(No.KS2422-10)of Republic of Korea。
文摘In this study,we explore an innovative approach to enhancing the photovoltaic performance of organic solar cells through core fluorination of the non-fullerene acceptor.We developed a benzotriazole-based non-fullerene acceptor with a trifluorinated phenyl side chain,referred to as YNPF3,which has a significant impact on the molecular properties,including a surprisingly varied local dipole moment and crystalline nature,as well as effectively stabilizing the frontier molecular orbital energy levels.Furthermore,a trifluorophenyl-based non-fullerene acceptor exhibits enhanced absorptivity,restricted voltage loss,and favorable photoactive morphology compared with its methyl side chain counterpart non-fullerene acceptor.Consequently,a binary organic solar cell based on YNPF3 achieves an outstanding power conversion efficiency of 19.2%,surpassing the control device with a efficiency of 16.5%.Finally,the YNPF3-based organic solar cell presents an impressive power conversion efficiency of 16.6%in a mini-module device with an aperture size of 12.5 cm^(2),marking the highest reported efficiency for series-connected binary organic solar cells with a photoactive area over 10 cm^(2).
基金financially supported by the National Natural Science Foundation of China(21905137)the Research Grants Council of Hong Kong(15307922,C5037-18G,C4005-22Y)+1 种基金RGC Senior Research Fellowship Scheme(SRFS2223-5S01)the Hong Kong Polytechnic University:Sir Sze-yuen Chung Endowed Professorship Fund(8-8480)。
文摘Semitransparent organic photovoltaics(ST-OPVs)for building integration represent a pivotal direction in the development of photovoltaic industry.Solution-processed silver nanowires(AgNWs)are considered promising candidates for transparent electrodes in semitransparent devices due to their high transparency-conductivity-efficiency merit,large-scale processability,and low cost.In this work,we develop two solution-processed organic–inorganic hybrid electrodes,named AgNWs-PD and AgNWsPC,utilizing AgNWs as the conductive framework and aliphatic amine-functionalized perylene-diimide(PDINN)as the sandwiched material,while AgNWs-PC exhibits significantly improved electrical conductivity and enhanced contact area with the underlying electron transport layer.The optimized device achieves a power conversion efficiency of 9.45%with an open circuit voltage of 0.846 V,a high filling factor of 75.4%,and an average visible transmittance(AVT)of 44.0%,delivering an outstanding light utilization efficiency(LUE)of 4.16%,which is the highest reported value for all solution-processed ST-OPVs.In addition,by coupling a 30-nm tellurium dioxide atop AgNWs-PC,the bifaciality factor of derivative devices improves from 73.7%to 99.4%,while maintaining a high bifacial LUE over 3.7%.Our results emphasize the superiority and effectiveness of PDINN-sandwiched AgNWs electrodes for highperformance and all solution-processed ST-OPVs.
基金supported by North China Electric Power Research Institute’s Self-Funded Science and Technology Project“Research on Distributed Energy Storage Optimal Configuration and Operation Control Technology for Photovoltaic Promotion in the Entire County”(KJZ2022049).
文摘In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and balancing a large number of loads nearby.However,under the background of a large-scale DPV grid-connected to the county distribution network,an effective analysis method is needed to analyze its impact on the voltage of the distribution network in the early development stage of DPV.Therefore,a DPV orderly grid-connected method based on photovoltaics grid-connected order degree(PGOD)is proposed.This method aims to orderly analyze the change of voltage in the distribution network when large-scale DPV will be connected.Firstly,based on the voltagemagnitude sensitivity(VMS)index of the photovoltaics permitted grid-connected node and the acceptance of grid-connected node(AoGCN)index of other nodes in the network,thePGODindex is constructed to determine the photovoltaics permitted grid-connected node of the current photovoltaics grid-connected state network.Secondly,a photovoltaics orderly grid-connected model with a continuous updating state is constructed to obtain an orderly DPV grid-connected order.The simulation results illustrate that the photovoltaics grid-connected order determined by this method based on PGOD can effectively analyze the voltage impact of large-scale photovoltaics grid-connected,and explore the internal factors and characteristics of the impact.
文摘Conventional concentrator photovoltaics(CPV)face a persistent trade-off between high efficiency and high cost,driven by expensive multi-junction solar cells and complex active cooling systems.This study presents a computational investigation of a novel Multi-Focal Pyramidal Array(MFPA)-based CPV system designed to overcome this limitation.The MFPA architecture employs a geometrically optimized pyramidal concentrator to distribute concen-trated sunlight onto strategically placed,low-cost monocrystalline silicon cells,enabling high efficiency energy capture while passively managing thermal loads.Coupled optical thermal electrical simulations in COMSOL Multiphysics demonstrate a geometric concentration ratio of 120×,with system temperatures maintained below 110℃ under standard 1000 W/m2 Direct Normal Irradiance(DNI).Ray tracing confirms 95%optical efficiency and a concentrated light spot radius of 2.48 mm.Compared with conventional CPV designs,the MFPA improves power-per-cost by 25%and reduces tracking requirements by 50%owing to its wide±15°acceptance angle.These results highlight the MFPA’s potential as a scalable,low-cost,and energy-efficient pathway for expanding solar power generation.
基金the support of the research commission of the Catholic University of Lille and its Foundationthe IEMN laboratory for the financial supportsupport from the Materials Research Institute (MRI) and the Institute of Energy and the Environment (IEE) of the Pennsylvania State University。
文摘Embedding a third and/or fourth component into a binary blend active layer of organic photovoltaics (OPVs) is a promising approach to achieve high-performance photovoltaic cells and modules. This multicomponent strategy favors absorption broadening via additional components. Quaternary OPV (QOPV) blends have four components in three possible configurations: (i) a donor and three acceptors, (ii) two donors and two acceptors, or (iii) three donors and an acceptor. Although quaternary systems have only been relatively recently studied compared to other systems in OPVs, leveraging the synergistic effects of the four components leads to record power conversion efficiencies, currently approaching 20%. QOPVs provide ample material choices for compatibility and channels for charge transfer mechanisms, possibly leading to optimized morphology and orientation. Reviewing recent progress in advancing QOPVs is essential for understanding their contribution to the OPV field. The review mainly discusses research progress in QOPVs with a keen interest in their various configurations, semitransparency, and outdoor and indoor applications. It describes the not-well-understood QOPV's general working mechanism. This review explores high-performance QOPVs based on the fourth component's contribution as a donor, acceptor, or dye molecule and beyond in photovoltaic applications. Finally, there is a discussion around QOPV's outlook and projected future research directions in this field. This review intends to provide an overview of the quaternary systems approach to OPVs and inform current and future researchers on investigating the full spectrum of OPVs.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.2022ZYGXZR099)Pazhou Lab(No.PZL2022KF0010).
文摘With the rapid development of emerging photovoltaics technology in recent years,the application of building-integrated photovoltaics(BIPVs)has attracted the research interest of photovoltaic communities.To meet the practical application requirements of BIPVs,in addition to the evaluation indicator of power conversion efficiency(PCE),other key performance indicators such as heat-insulating ability,average visible light transmittance(AVT),color properties,and integrability are equally important.The traditional Si-based photovoltaic technology is typically limited by its opaque properties for application scenarios where transparency is required.The emerging PV technologies,such as organic and perovskite photovoltaics are promising candidates for BIPV applications,owing to their advantages such as high PCE,high AVT,and tunable properties.At present,the PCE of semitransparent perovskite solar cells(ST-PSCs)has attained 14%with AVT of 22–25%;for semitransparent organic solar cells(ST-OSCs),the PCE reached 13%with AVT of almost 40%.In this review article,we summarize recent advances in material selection,optical engineering,and device architecture design for high-performance semitransparent emerging PV devices,and discuss the application of optical modeling,as well as the challenges of commercializing these semitransparent solar cells for building-integrated applications.
基金financial Supports from Natural Science Foundation of Jiangxi(No.20161BBE50095)supported by Ministry of Science and Technology(No.2017YFA0204702)+2 种基金National Natural Science Foundation of China(No.51773207,21574138,21801213)supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB12030200)Fundamental Research Funds for the Central Universities(No.XK1802-2)。
文摘Indoor photovoltaics have attracted increasing attentions owing to their great potential in supplying energy for low power devices under indoor light in our daily life.The third generation thin-film solar cells,including dye-sensitized solar cells,perovskite solar cells and organic solar cells,have made rapid progress from the aspect of materials design to photovoltaic performance.This review provides an overview on the recent advances in the development of indoor photovoltaic technologies based on the third generation solar cells.The design principles of advanced thin-film indoor photovoltaics were also summarized according to the characteristics of indoor light and the advantages of the third generation solar cells.Finally,after summarizing the current research progress,the perspective on this topic is provided.
基金the CSIRO Low Emissions Technologies Program for the support of this studythe financial support from the Australian Research Council(ARC)for the Future Fellowship(FT130101337)+4 种基金QUT core funding(QUT/322120-0301/07)supported by NSF MRI(1428992)U.S.-Egypt Science and Technology(S&T)Joint FundSDBoR R&D ProgramEDA University Center Program(ED18DEN3030025)。
文摘Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.
基金the financial support of the project from the National Natural Science Foundation of China(Grant No.61574117)the Natural Science Foundation of Guangdong Province(Grant No.2018B030311002)the China Scholarship Council(Grant No.201806310044)。
文摘A full-duplex radiant energy converter based on both betavoltaic and photovoltaic effects in an easyto-implement way is an attractive alternative for the autonomous wireless sensor microsystem.Here,we report a novel beta/photovoltaic cell based on free-standing Zn O nanorod arrays(ZNRAs)modified with metallic single-walled carbon nanotubes(m-SWCNTs),using radioisotope63 Ni as beta-emitting source.The ZNRAs were grown on Al-doped Zn O(AZO)conductive glass using hydrothermal method.The optimum length and diameter of Zn O nanorods were determined by Monte Carlo simulation for beta energy deposition in ZNRAs.The m-SWCNTs were anchored into the ZNRAs to form a three-dimensional(3-D)Schottky junction structure for effectively separating the beta/photo-excited electron-hole pairs.Experimentally,the betavoltaic and photovoltaic effects were confirmed through the I-V measurements of beta/photovoltaic cells under beta/UV/Vis irradiations,respectively.It is suggested that the m-SWCNTs play key role for the enhancement of beta/photovoltaic performance through the formation of extensive3-D Schottky junction,the conductive network for hole transport,and the surface plasmon resonance exciton absorption for visible light.
基金Project supported by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership in the frame of Operational Competitiveness and Internationalization Programme(projects UIDB/50011/2020&UIDP/50011/2020,UID/EEA/50008/2020,UID/QUI/50006/2019,CENTRO-01-0145-FEDER-030186,CENTRO-01-0145-FEDER-000005,Pest-OE/QUI/UI0616/2014,POCI-01-0145-FEDER-016884,PTDC/CTM-NAN/0956/2014,UID/QUI/00686/2016,UID/QUI/00686/2018,UID/QUI/00686/2019 and NORTE-01-0145-FEDER-030858)。
文摘The mismatch between the photovoltaic(PV)cells absorption and the solar irradiance on earth is one of the major limitations towards more efficient PV energy conversion.This aspect was addressed by downshifting the solar irradiance on Earth through luminescent down-shifting layers based on lanthanidedoped surface-functionalized ionosilicas(ISs)embedded in poly(methyl methacrylate)(PMMA)coated on the surface of commercial Si-based PV cells.The IS-PMMA hybrid materials exhibit efficient solar radiation harvesting(spectral overlap of^9.5×10^19 photons/(s·m2))and conversion(quantum yield^52%).The direct solar radiation and the down-shifted radiation are partially guided and lost through total internal reflection to the layer edges being unavailable for PV conversion of the coated PV cell.By tuning the down-shifting layer thickness,it also acts as luminescent solar concentrator enabling the collection of the guided radiation by flexible PV cells applied on the borders of the down-shifting layer leading to an enhancement of the PV energy conversion from^5%(in the case of the single-use of the luminescent down-shifting layer)to^13%comparing with the bare PV cell.The overall electrical output of the device resulted in an absolute external quantum efficiency increase of^32%for the optimized Eu^3+-based films in the UV spectral region(compared with the bare PV device,which is among the best values reported so far).
基金supported by FP7 European collaborative project SUNFLOWER(FP7-ICT-2011-7contract No.287594)the Spanish Ministerio de Economía y Competitividad(project MAT2013-47192-C3-1-R)+1 种基金Generalitat Valenciana(project ISIC/2012/008 Institute of Nanotechnologies for Clean Energies)the Spanish Ministerio de Economía y Competitividad for a Ramón y Cajal Fellowship(RYC2014-16809)
文摘Organic photovoltaic devices are on the verge of commercialization with power conversion efficiencies exceeding 10 % in laboratory cells and above 8.5 % in modules. However, one of the main limitations hindering their mass scale production is the debatable inferior stability of organic photovoltaic devices in comparison to other technologies.Adequate donor/acceptor morphology of the active layer is required to provide carrier separation and transport to the electrodes. Unfortunately, the beneficial morphology for device performance is usually a kinetically frozen state which has not reached thermodynamic equilibrium. During the last 5 years, special efforts have been dedicated to isolate the effects related to morphology changes taking place within the active layer and compare to those affecting the interfaces with the external electrodes. The current review discusses some of the factors affecting the donor/acceptor morphology evolution as one of the major intrinsic degradation pathways. Special attention is paid to factors in the nano- and microscale domain.For example, phase segregation of the polymer and fullerene domains due to Ostwald ripening is a major factor in the microscale domain and is affected by the presence of additives, glass transition temperature of the polymers or use of crosslinkers in the active layer. Alternatively, the role of vertical segregation profile toward the external electrodes is key for device operation, being a clear case of nanoscale morphology evolution. For example, donor and acceptor molecules actually present at the external interfaces will determine the leakage current of the device, energy-level alignment, and interfacial recombination processes. Different techniques have been developed over the last few years to understand its relationship with the device efficiency. Of special interest are those techniques which enable in situ analysis being nondestructive as they can be used to study accelerated degradation experiments and some will be discussed here.
基金the financial supporting from the NSFC(61975006,61675017)NSFRPSI(Y72Z090Q10)+3 种基金the NSFCQ(cstc2019jcyj-msxm X0400)the NYTPP(R52A199Z11)the YIPACAS(E0296104)the BNSF(4192049)。
文摘Small molecule organic photovoltaics(SMPVs) were prepared by utilizing liquid crystalline donor material BTR-Cl and two similar optical bandgap non-fullerene acceptor materials BTP-BO-4 F and Y6.The BTPBO-4 F and Y6 have the similar optical bandgap and different absorption coefficients.The corresponding binary SMPVs exhibit different short circuit current density(/sc)(20.38 vs.23.24 mA cm^(-2)),and fill factor(FF)(70.77% vs.67.21%).A 14.46% power conversion efficiency(PCE) is acquired in ternary SMPVs with 30 wt% Y6,companied with a JSC of 24.17 mA cm^(-2) a FF of 68.78% and an open circuit voltage(Voc) of 0.87 V.The improvement on PCE of ternary SMPVs should originate from the well trade-off between phase separation and photon harvesting of ternary active layers by incorporating 30 wt% Y6 in acceptors.This work may deliver insight onto the improved performance of SMPVs by superposing the superiorities of binary SMPVs with similar optical bandgap acceptors into one ternary cell.
文摘A building integrated photovoltaic (PV) and fuel cell (FC) system is proposed for assessment of the energy self-sufficiency rate in a city in Japan. The electricity consumed in the building is mainly supplied by solar panels, while the gap between the energy demand and supply is solved by the FC that is powered by the H2 produced by water electrolysis with surplus power of PV. A desktop case study of using the proposed system in Tsu city which is located in central part of Japan, has been conducted. The results found that the self-sufficiency rates of PV system to electricity demand of households (RPV) during the daytime in April and July are higher than those in January and October. The results also reveal that the self-sufficiency rate of FC system to the electricity demand (RFC) is 15% - 38% for the day when the mean amount of horizontal solar radiation is obtained in January, April, July and October. In addition, it is found the optimum tilt angle of solar panel installed on the roof of the buildings should be 0 degree, i.e., placed horizontally.
基金X.Z.acknowledges the funding support from National Science Foundation of China(NSFC)(No.61975073 and No.61605076)W.D.thanks the financial support from NSFC(No.11872199 and No.11932009).
文摘Solution processible photovoltaics(PV)are poised to play an important role in scalable manufacturing of low-cost solar cells.Electrospray is uniquely suited for fabricating PVs due to its several desirable characteristics of an ideal manufacturing process such as compatibility with roll-to-roll production processes,tunability and uniformity of droplet size,capability of operating at atmospheric pressure,and negligible material waste and nano structures.This review begins with an introduction of the fundamentals and unique properties of electrospray.We put emphasis on the evaporation time and residence time that jointly affect the deposition outcome.Then we review the efforts of electrospray printing polymer solar cells,perovskite solar cells,and dye sensitized solar cells.Collectively,these results demonstrate the advantages of electrospray for solution processed PV.Electrospray has also exhibited the capability of producing uniform films as well as nanostructured and even multiscale films.So far,the electrospray has been found to improve active layer morphology,and create devices with efficiencies comparable with that of spin-coating.Finally,we discuss challenges and research opportunities that enable electrospray to become a mainstream technique for industrial scale production.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.RS-2023-00213920,NRF-2021R1A4A1031761).
文摘Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are investigated.The film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was applied.Grazing incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD films.Time-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive control.In addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD films.In SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied layer.This study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.
基金funding by the German Federal Ministry for Economic Affairs and Energy (BMWi)the German Federal Ministry of Education and Research (BMBF)+1 种基金the German State of Baden-Württembergthe European Union
文摘In this article, we discuss the leading thin-film photovoltaic （PV） technology based on the Cu（ln,Ga）Se2 （CIGS） compound semiconductor. This contribution includes a general comparison with the conventional Si-wafer-based PV technology and discusses the basics of the CIGS technology as well as advances in world-record-level conversion efficiency, production, applications, stability, and future developments with respect to a flexible product. Once in large-scale mass production, the CIGS technology has the highest potential of all PV technologies for cost-efficient clean energy generation.
