In this work,the combined addition of strontium/indium(Sr/In)to the magnesium anode for Mg-Air Cells is investigated to improve discharge performance by modifying the anode/electrolyte interface.Indium exists as solid...In this work,the combined addition of strontium/indium(Sr/In)to the magnesium anode for Mg-Air Cells is investigated to improve discharge performance by modifying the anode/electrolyte interface.Indium exists as solid solution atoms in theα-Mg matrix without its second-phase generation,and at the same time facilitates grain refinement,dendritic segregation and Mg17Sr2-phases precipitation.During discharge operation,Sr modifies the film composition via its compounds and promoted the redeposition of In at the substrate/film interface;their co-deposition behavior on the anodic reaction surface enhances anode reaction kinetics,suppresses the negative difference effect(NDE)and mitigates the“chunk effect”(CE),which is contributed to uniform dissolution and low self-corrosion hydrogen evolution rate(HER).Therefore,Mg-Sr-xIn alloy anodes show excellent discharge performance,e.g.,0.5Sr-1.0In shows an average discharge voltage of 1.4234 V and a specific energy density of 1990.71 Wh kg^(-1)at 10 mA cm^(-2).Furthermore,the decisive factor(CE and self-discharge HE)for anodic efficiency are quantitively analyzed,the self-discharge is the main factor of cell efficiency loss.Surprisingly,all Mg-Sr-xIn anodes show anodic efficiency greater than 60%at high current density(≥10 mA cm^(-2)),making them excellent candidate anodes for Mg-Air cells at high-power output.展开更多
Silicon(Si)is a promising anode material for rechargeable batteries due to its high theoretical capacity and abundance,but its practical application is hindered by the continuous growth of porous solid-electrolyte int...Silicon(Si)is a promising anode material for rechargeable batteries due to its high theoretical capacity and abundance,but its practical application is hindered by the continuous growth of porous solid-electrolyte interphase(SEI),leading to capacity fade.Herein,a LiF-Pie structured SEI is proposed,with LiF nanodomains encapsulated in the inner layer of the organic cross-linking silane matrix.A series of advanced techniques such as cryogenic electron microscopy,time-of-flight secondary ion mass spectrometry,and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry have provided detailed insights into the formation mechanism,nanostructure,and chemical composition of the interface.With such SEI,the capacity retention of LiCoO_(2)||Si is significantly improved from 49.6%to 88.9%after 300 cycles at 100 mA g^(-1).These findings provide a desirable interfacial design principle with enhanced(electro)chemical and mechanical stability,which are crucial for sustaining Si anode functionality,thereby significantly advancing the reliability and practical application of Si-based anodes.展开更多
Lithium metal batteries(LMBs)are emerging as a promising energy storage solution owing to their high energy density and specific capacity.However,the non-uniform plating of lithium and the potential rupture of the sol...Lithium metal batteries(LMBs)are emerging as a promising energy storage solution owing to their high energy density and specific capacity.However,the non-uniform plating of lithium and the potential rupture of the solid-electrolyte interphase(SEI)during extended cycling use may result in dendrite growth,which can penetrate the separator and pose significant short-circuit risks.Forming a stable SEI is essential for the long-term operation of the batteries.Fluorine-rich SEI has garnered significant attention for its ability to effectively passivate electrodes,regulate lithium deposition,and inhibit electrolyte corrosion.Understanding the structural components and preparation methods of existing fluorinated SEI is crucial for optimizing lithium metal anode performance.This paper reviews the research on optimizing LiF passivation interfaces to protect lithium metal anodes.It focuses on four types of compositions in fluorinated SEI that work synergistically to enhance SEI performance.For instance,combining compounds with LiF can further enhance the mechanical strength and ionic conductivity of the SEI.Integrating metals with LiF significantly improves electrochemical performance at the SEI/anode interface,with a necessary focus on reducing electron tunneling risks.Additionally,incorporating polymers with LiF offers balanced improvements in interfacial toughness and ionic conductivity,though maintaining structural stability over long cycles remains a critical area for future research.Although alloys combined with LiF increase surface energy and lithium affinity,challenges such as dendrite growth and volume expansion persist.In summary,this paper emphasizes the crucial role of interfacial structures in LMBs and offers comprehensive guidance for future design and development efforts in battery technology.展开更多
Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cyclin...Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cycling leads to the accumulation of undesirable stresses,resulting in pulverization of silicon microparticles and shortened lifespan of the batteries.Herein,a composite film of Cu-PET-Cu is proposed as the current collector(CC)forμSi anodes to replace the conventional Cu CC.Cu-PET-Cu CC is prepared by depositing Cu on both sides of a polyethylene terephthalate(PET)film.The PET layer promises good ductility of the film,permitting the Cu-PET-Cu CC to accommodate the volumetric changes of silicon microparticles and facilitates the stress release through ductile deformation.As a result,theμSi electrode with Cu-PET-Cu CC retains a high specific capacity of 2181 mA h g^(-1),whereas theμSi electrode with Cu CC(μSi/Cu)exhibits a specific capacity of 1285 mA h g^(-1)after 80 cycles.The stress relieving effect of CuPET-Cu was demonstrated by in-situ fiber optic stress monitoring and multi-physics simulations.This work proposes an effective stress relief strategy at the electrode level for the practical implementation ofμSi anodes.展开更多
Aqueous zinc-ion batteries are regarded as promising electrochemical energy-storage systems for various applications because of their high safety,low costs,and high capacities.However,dendrite formation and side react...Aqueous zinc-ion batteries are regarded as promising electrochemical energy-storage systems for various applications because of their high safety,low costs,and high capacities.However,dendrite formation and side reactions during zinc plating or stripping greatly reduce the capacity and cycle life of a battery and subsequently limit its practical application.To address these issues,we modified the surface of a zinc anode with a functional bilayer composed of zincophilic Cu and flexible polymer layers.The zincophilic Cu interfacial layer was prepared through CuSO_(4)solution pretreatment to serve as a nucleation site to facilitate uniform Zn deposition.Meanwhile,the polymer layer was coated onto the Cu interface layer to serve as a protective layer that would prevent side reactions between zinc and electrolytes.Benefiting from the synergistic effect of the zincophilic Cu and protective polymer layers,the symmetric battery exhibits an impressive cycle life,lasting over 2900 h at a current density of 1 m A·cm^(-2)with a capacity of 1 m A·h·cm^(-2).Moreover,a full battery paired with a vanadium oxide cathode achieves a remarkable capacity retention of 72%even after 500 cycles.展开更多
Carbon materials are widely recognized as highly promising electrode materials for various energy storage system applications.Coal tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilizati...Carbon materials are widely recognized as highly promising electrode materials for various energy storage system applications.Coal tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable world.In this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances assessment.Based on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were obtained.Furthermore,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of CTRCs.Results indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”mechanism.This work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.展开更多
As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a h...As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a high energy density,and having abundant resource,and a low cost.However,their commercialization is hindered by the lack of practical anode materials.Among various reported anodes,conventional carbon materials,including graphite,soft carbon,and hard carbon,have emerged as promising candidates because of their abundance,low cost,high conductivity,and tunable structures.However,these materials have problems such as a low initial Coulombic efficiency,significant volume expansion,and unsatisfactory cyclability and rate performance.Various strategies to solve these have been explored,including optimizing the interlayer spacing,structural design,surface coating,constructing a multifunctional framework,and forming composites.This review provides a comprehensive overview of the recent progress in conventional carbon anodes,highlighting structural design strategies,mechanisms for improving the electrochemical performance,and underscores the critical role of these materials in promoting the practical application of PIBs.展开更多
Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon h...Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.展开更多
Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiv...Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.展开更多
Phosphorus-based luminescent materials consist of certain phosphorus in the aromatic backbones,endowing a larger nuclear charge(Z,15P),rich valence states for the phosphorus core,and various electron geometries.These ...Phosphorus-based luminescent materials consist of certain phosphorus in the aromatic backbones,endowing a larger nuclear charge(Z,15P),rich valence states for the phosphorus core,and various electron geometries.These features enable promising exploitation for luminescent materials with significant quantum efficiencies and tunable singlet and triplet populations.This mini review focuses on the break-throughs of organic and organometallic phosphorus compounds in advanced circularly polarized fluorescence(CPF)and circularly polarized room-temperature phosphorescence(CP-RTP)by unveiling the structure-function relationships,e.g.,design concept,charge transfer(CT)type,chiral conformation,and excited state transition configuration,and the recent applications in optical information encryption,lighting-displaying,and organic light emitting diodes(OLEDs).By dedicated analysis of current progresses,we hope this work will throw insights into phosphorus-based CPF and CP-RTP behaviors and provide a reference for the rational design of high-performance phosphorus-based emitters.展开更多
Mg batteries have high energy density,economic safety,and environmental friendliness.They show great potential as an ideal energy storage technology.This review summarizes the limitations of Mg batteries and explores ...Mg batteries have high energy density,economic safety,and environmental friendliness.They show great potential as an ideal energy storage technology.This review summarizes the limitations of Mg batteries and explores the complex reactions at the Mg anode/electrolyte interface.It focuses on critical issues such as the dissolution of Mg anodes,the evolution of hydrogen gas,the formation of a passivation layer that hinders Mg^(2+)migration,and dendrite growth.To address these interface problems,the review discusses strategies to improve interface reactions.These include the structural design of Mg anodes,suitable substitute materials for the anode,and artificial solid electrolyte interphase films.Finally,it outlines the future research directions for the ideal Mg anode interfaces.The goal is to develop more efficient interface design schemes and optimization strategies to advance Mg battery technology further.展开更多
Biomass-derived hard carbon has gradually become an important component of sodium-ion batteries’anodes.In this work,Setaria viridis,a widely distributed plant,was employed as a precursor to synthesize hard carbon ano...Biomass-derived hard carbon has gradually become an important component of sodium-ion batteries’anodes.In this work,Setaria viridis,a widely distributed plant,was employed as a precursor to synthesize hard carbon anodes for sodium-ion batteries.However,the hard carbon derived fromrawprecursors contains substantial impurities,which limit the performance of the obtained hard carbon.With different chemical etching processes,the content of impurities in the resultants was reduced to varying degrees.The optimized hard carbon anode delivered a reversible capacity of 198 mAh g-1 at a current density of 0.04 A g^(-1).This work shows the effects of impurities,especially the Si-based matter,on the formation of microstructure and electrochemical performance of the regulated hard carbon,which broadens the application of the biomass-derived materials.This work also provides a strategy for processing impurity-rich biomass precursors to develop hard carbon anodes for sodium-ion batteries(SIBs).展开更多
Sodium-ion batteries(SIBs) are promising electrochemical energy storage systems as lithium-ion batteries by virtue of their similar chemical properties and natural abundance and availability.However,the ionic radius o...Sodium-ion batteries(SIBs) are promising electrochemical energy storage systems as lithium-ion batteries by virtue of their similar chemical properties and natural abundance and availability.However,the ionic radius of Na^(+)is larger than that of Li^(+),leading to challenges in its insertion/extraction at anode side.As a class of anode materials,phosphorus allotropes(PAs,red,and black) and metal phosphides(MPs) have shown great prospects because of high theoretical gravimetric/volumetric capacity,high carrier mobility,and suitable redox potential.In this review,recent developments in the studies of PAs and MPs with particular emphasis on understanding sodium storage mechanisms,developing novel synthesis strategies,and performance validations have been manifested valuable solutions to address these challenges.We begin with the introduction and classification of the macroscopic sodiation mechanisms of PAs and MPs,and the various fabrication strategies of PAs and MPs are comprehensively summarized in second section.The third section thoroughly reviews the progresses on PAs and MPs-based advanced materials for their application in SIBs.Finally,we also discuss the significant challenges and outline a roadmap for future research directions.展开更多
Aqueous zinc(Zn)-ion batteries(ZIBs)have garnered significant attention as promising energy storage devices,primarily due to their low cost,high power density,and excellent safety profile.However,the commercial viabil...Aqueous zinc(Zn)-ion batteries(ZIBs)have garnered significant attention as promising energy storage devices,primarily due to their low cost,high power density,and excellent safety profile.However,the commercial viability of these batteries is hindered by several issues related to the Zn metal anode,including dendritic growth,hydrogen evolution reaction(HER),surface corrosion,and passivation.This review delves into the root causes and key factors influencing these challenges from both electrochemical thermodynamics and kinetics perspectives.Subsequently,viable strategies to mitigate these issues are systematically summarized,including Zn anode reconstruction,artificial solid-electrolyte interphase(SEI)protection,electrolyte formulation optimization,and separator functionalization.Recent research advancements are examined thoroughly,with a focus on the mechanisms behind these approaches and the resulting battery performance.The review also critically assesses the strengths and limitations of these solutions.Finally,we highlight crucial research directions aimed at advancing the practical application of Zn metal anodes in future aqueous ZIBs.展开更多
Aqueous zinc-ion batteries(AZIBs)are widely used in energy storage devices due to their low cost and environmental sustainability.Nevertheless,the growth of Zn dendrites and the occurrence of side reactions remain sig...Aqueous zinc-ion batteries(AZIBs)are widely used in energy storage devices due to their low cost and environmental sustainability.Nevertheless,the growth of Zn dendrites and the occurrence of side reactions remain significant barriers to the practical application of AZIBs.Here,a hydrophobic and zinc-compatible solid-electrolyte interface layer of poly(dimethylsiloxane)(PDMS)is in situ grafted on the Zn anode surface via spontaneous hydrolytic condens ation reactions.The high viscoelasticity of PDMS and the chemically formed Si-O-Zn bonds synergistically ensure the adaptability and stability of PDMS on Zn anodes.Moreover,the strong hydrophobicity of PDMS shields the direct contact between the Zn anode and the aqueous electrolyte and further optimizes the reversible plating/stripping of Zn.The symmetrical cell assembled with PDMS@Zn anode displays a long lifespan of over 3000 h at 1 mA cm^(-2)for 1 mAh cm^(-2).The PDMS@Zn‖NH_(4)V_(4)O_(10)full cell maintains the specific capacity of 284.8 mAh g^(-1)after 1200 cycles at 1 A g^(-1).Overall,our work sheds new light on the Zn electrodeposition process under the mediation of anode interface,offers sustainability considerations in designing stable Zn metal anodes,as well as provides a facile and viable path for stabilizing Zn anodes to achieve dendrite-free and long lifespan.展开更多
Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electro...Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electrodes'material.However,Mg metal anodes face several challenges,notably the natively existence of an inactive oxide layer on their surfaces,which reduces their effectiveness.Additionally,interactions of Mg electrodes with electrolyte solutions'components can lead to the formation of insulating surface layers,that can fully block them for ions transport.This review addresses these issues by focusing on surface treatments strategies to enhance electrochemical performance of Mg anodes.It highlights chemical and physical modification techniques to prevent oxidation and inactive-layers formation,as well as their practical implications for MIBs.We also examined the impact of Mg anodes'surface engineering on their electrochemical reversibility and cycling efficiency.Finally,future research directions to improve the performance and commercial viability of magnesium anodes and advance development of high-capacity,safe,and cost-effective energy storage systems based on magnesium electrochemistry are discussed.展开更多
Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume ...Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume expansion,leading to structural degradation and poor cycling stability.Polymer binders play a critical role in addressing these issues by providing mechanical stabilization.Inspired by the mechanically adaptive architecture of spider webs,where stiff radial threads and extensible spiral threads act in synergy,a dual-thread architecture polymer binder(PALT)with energy dissipation ability enabled by integrating rigid and flexible domains is designed.The rigid poly(acrylic acid lithium)(PAALi)segments offer structural reinforcement,while the soft segments(poly(lipoic acid-tannic acid),LT)introduce dynamic covalent bonds and multiple hydrogen bonds that function as reversible sacrificial bonds,enhancing energy dissipation during cycling.Comprehensive experimental and computational analyses demonstrate effectively reduced stress concentration,improved structural integrity,and stable electrochemical performance over prolonged cycling.The silicon anode incorporating the PALT binder exhibits a satisfying capacity loss per cycle of 0.042% during 350 charge/discharge cycles at 3580 m A g^(-1).This work highlights a bioinspired binder design strategy that combines intrinsic rigidity with dynamic stress adaptability to advance the mechanical and electrochemical stability of silicon anodes.展开更多
This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silic...This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silicon matrices,we successfully improved both the mechanical stability and electrochemical kinetics of the anode.The developed force-electric coupling model explains how BTO mitigates stress accumulation during lithiation while optimizing the kinetics of Li^(+)and electron transfer.Experimental verification and multiphysical simulation indicate that Si@BTO effectively eliminates structural degradation during the cycling process and significantly reduces the charge transfer resistance.The force-electric coupling mechanism further facilitates stable solid electrolyte interphase(SEI)formation.When paired with LiFePO_(4)cathodes,Si@BTO maintains 76% capacity retention after 500 cycles at a 10 C rate.This work establishes a basic force-electric coupling model framework and offers insights into the development of advanced silicon anode batteries with exceptional performance.展开更多
Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-d...Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-depth investigation into the relationship between the molecular weight(MW)of PAA and its performance in pure Si anodes,leading to an absence of reliable theoretical guidance for designing and optimizing of PAA-based binders for these anodes.Herein,we select a series of PAA with varying MWs as binders for Si nanoparticle(SiNP)anodes to systematically identify the optimal MW of PAA for enhancing the electrochemical performance of SiNP anodes.The actual MWs of the various PAA were confirmed by gel permeation chromatography to accurately establish the relationship between MW and binder performance.Within an ultrawide weight average molecular weight(M_(w))range of 35.9-4850 kDa,we identify that the PAA binder with a M_(w)of 1250 kDa(PAA125)exhibits the strongest mechanical strength and the highest adhesion strength,attributed to its favorable molecular chain orientation and robust interchain interactions.These characteristics enable the SiNP anodes utilizing PAA125 to maintain the best interfacial chemistry and bulk mechanical structure stability,leading to optimal electrochemical performance.Notably,the enhancement in cycling stability of SiNP anode by PAA125 under practical application conditions is further validated by the 1.1 Ah LLNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/SiNP@PAA125 pouch cell.展开更多
The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicy...The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicylic acid(SAL),2,6-dihydroxybenzoic acid(2,6-DHB),and 5-sulfoisophthalic acid(5-sulfoSAL)were selected as potential candidates.Through electrochemical tests,full-cell discharge experiments,and physicochemical characterization,the impact of these complexing agents on the discharge performance of magnesium-air batteries using AZ31 alloy as the anode material was investigated.The results demonstrated that the four complexing agents increased the discharge voltage of the batteries.Notably,SAL could significantly improve the anodic efficiency and the discharge specific capacity,achieving an anodic efficiency of 60.3%and a specific capacity of 1358.3 mA·h/g at a discharge current density of 10 mA/cm^(2).展开更多
文摘In this work,the combined addition of strontium/indium(Sr/In)to the magnesium anode for Mg-Air Cells is investigated to improve discharge performance by modifying the anode/electrolyte interface.Indium exists as solid solution atoms in theα-Mg matrix without its second-phase generation,and at the same time facilitates grain refinement,dendritic segregation and Mg17Sr2-phases precipitation.During discharge operation,Sr modifies the film composition via its compounds and promoted the redeposition of In at the substrate/film interface;their co-deposition behavior on the anodic reaction surface enhances anode reaction kinetics,suppresses the negative difference effect(NDE)and mitigates the“chunk effect”(CE),which is contributed to uniform dissolution and low self-corrosion hydrogen evolution rate(HER).Therefore,Mg-Sr-xIn alloy anodes show excellent discharge performance,e.g.,0.5Sr-1.0In shows an average discharge voltage of 1.4234 V and a specific energy density of 1990.71 Wh kg^(-1)at 10 mA cm^(-2).Furthermore,the decisive factor(CE and self-discharge HE)for anodic efficiency are quantitively analyzed,the self-discharge is the main factor of cell efficiency loss.Surprisingly,all Mg-Sr-xIn anodes show anodic efficiency greater than 60%at high current density(≥10 mA cm^(-2)),making them excellent candidate anodes for Mg-Air cells at high-power output.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB2502200)the National Natural Science Foundation of China(NSFC nos.52172257 and 22409211)+2 种基金the China Postdoctoral Science Foundation(No.2023M743739)the Postdoctoral Fellowship Program of CPSF(No.GZC20232939)CAS Youth Interdisciplinary Team。
文摘Silicon(Si)is a promising anode material for rechargeable batteries due to its high theoretical capacity and abundance,but its practical application is hindered by the continuous growth of porous solid-electrolyte interphase(SEI),leading to capacity fade.Herein,a LiF-Pie structured SEI is proposed,with LiF nanodomains encapsulated in the inner layer of the organic cross-linking silane matrix.A series of advanced techniques such as cryogenic electron microscopy,time-of-flight secondary ion mass spectrometry,and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry have provided detailed insights into the formation mechanism,nanostructure,and chemical composition of the interface.With such SEI,the capacity retention of LiCoO_(2)||Si is significantly improved from 49.6%to 88.9%after 300 cycles at 100 mA g^(-1).These findings provide a desirable interfacial design principle with enhanced(electro)chemical and mechanical stability,which are crucial for sustaining Si anode functionality,thereby significantly advancing the reliability and practical application of Si-based anodes.
基金support from the National Natural Science Foundation of China(No.U2333210)the Sichuan Science and Technology Program,China(No.21SYSX0011)。
文摘Lithium metal batteries(LMBs)are emerging as a promising energy storage solution owing to their high energy density and specific capacity.However,the non-uniform plating of lithium and the potential rupture of the solid-electrolyte interphase(SEI)during extended cycling use may result in dendrite growth,which can penetrate the separator and pose significant short-circuit risks.Forming a stable SEI is essential for the long-term operation of the batteries.Fluorine-rich SEI has garnered significant attention for its ability to effectively passivate electrodes,regulate lithium deposition,and inhibit electrolyte corrosion.Understanding the structural components and preparation methods of existing fluorinated SEI is crucial for optimizing lithium metal anode performance.This paper reviews the research on optimizing LiF passivation interfaces to protect lithium metal anodes.It focuses on four types of compositions in fluorinated SEI that work synergistically to enhance SEI performance.For instance,combining compounds with LiF can further enhance the mechanical strength and ionic conductivity of the SEI.Integrating metals with LiF significantly improves electrochemical performance at the SEI/anode interface,with a necessary focus on reducing electron tunneling risks.Additionally,incorporating polymers with LiF offers balanced improvements in interfacial toughness and ionic conductivity,though maintaining structural stability over long cycles remains a critical area for future research.Although alloys combined with LiF increase surface energy and lithium affinity,challenges such as dendrite growth and volume expansion persist.In summary,this paper emphasizes the crucial role of interfacial structures in LMBs and offers comprehensive guidance for future design and development efforts in battery technology.
基金supported by the the National Key R&D Program of China(2022YFB3803500)the Natural Science Foundation of Hubei Province(2021CFA066).
文摘Micron-sized silicon(μSi)is a promising anode material for next-generation lithium-ion batteries due to its high specific capacity,low cost,and abundant reserves.However,the volume expansion that occurs during cycling leads to the accumulation of undesirable stresses,resulting in pulverization of silicon microparticles and shortened lifespan of the batteries.Herein,a composite film of Cu-PET-Cu is proposed as the current collector(CC)forμSi anodes to replace the conventional Cu CC.Cu-PET-Cu CC is prepared by depositing Cu on both sides of a polyethylene terephthalate(PET)film.The PET layer promises good ductility of the film,permitting the Cu-PET-Cu CC to accommodate the volumetric changes of silicon microparticles and facilitates the stress release through ductile deformation.As a result,theμSi electrode with Cu-PET-Cu CC retains a high specific capacity of 2181 mA h g^(-1),whereas theμSi electrode with Cu CC(μSi/Cu)exhibits a specific capacity of 1285 mA h g^(-1)after 80 cycles.The stress relieving effect of CuPET-Cu was demonstrated by in-situ fiber optic stress monitoring and multi-physics simulations.This work proposes an effective stress relief strategy at the electrode level for the practical implementation ofμSi anodes.
基金financially supported by the Science and Technology Development Project of Henan Province,China(No.242102241042)the Joint Fund of Henan Province Science and Technology R&D Program(No.225200810093)+1 种基金the Startup Research of Henan Academy of Sciences(No.231817001)the Key Innovation Projects for Postgraduates of Henan Academy of Sciences(No.24331712)。
文摘Aqueous zinc-ion batteries are regarded as promising electrochemical energy-storage systems for various applications because of their high safety,low costs,and high capacities.However,dendrite formation and side reactions during zinc plating or stripping greatly reduce the capacity and cycle life of a battery and subsequently limit its practical application.To address these issues,we modified the surface of a zinc anode with a functional bilayer composed of zincophilic Cu and flexible polymer layers.The zincophilic Cu interfacial layer was prepared through CuSO_(4)solution pretreatment to serve as a nucleation site to facilitate uniform Zn deposition.Meanwhile,the polymer layer was coated onto the Cu interface layer to serve as a protective layer that would prevent side reactions between zinc and electrolytes.Benefiting from the synergistic effect of the zincophilic Cu and protective polymer layers,the symmetric battery exhibits an impressive cycle life,lasting over 2900 h at a current density of 1 m A·cm^(-2)with a capacity of 1 m A·h·cm^(-2).Moreover,a full battery paired with a vanadium oxide cathode achieves a remarkable capacity retention of 72%even after 500 cycles.
基金financially supported by the Research Project Supported by Shanxi Scholarship Council of China(No.2022-049)the Natural Science Foundation of Shanxi Province,China(No.20210302123167)。
文摘Carbon materials are widely recognized as highly promising electrode materials for various energy storage system applications.Coal tar residues(CTR),as a type of carbon-rich solid waste with high value-added utilization,are crucially important for the development of a more sustainable world.In this study,we employed a straightforward direct carbonization method within the temperature range of 700-1000℃to convert the worthless solid waste CTR into economically valuable carbon materials as anodes for potassium-ion batteries(PIBs).The effect of carbonization temperature on the microstructure and the potassium ions storage properties of CTR-derived carbons(CTRCs)were systematically explored by structural and morphological characterization,alongside electrochemical performances assessment.Based on the co-regulation between the turbine layers,crystal structure,pore structure,functional groups,and electrical conductivity of CTR-derived carbon carbonized at 900℃(CTRC-900H),the electrode material with high reversible capacity of 265.6m Ah·g^(-1)at 50 m A·g^(-1),a desirable cycling stability with 93.8%capacity retention even after 100 cycles,and the remarkable rate performance for PIBs were obtained.Furthermore,cyclic voltammetry(CV)at different scan rates and galvanostatic intermittent titration technique(GITT)have been employed to explore the potassium ions storage mechanism and electrochemical kinetics of CTRCs.Results indicate that the electrode behavior is predominantly governed by surface-induced capacitive processes,particularly under high current densities,with the potassium storage mechanism characterized by an“adsorption-weak intercalation”mechanism.This work highlights the potential of CTR-based carbon as a promising electrode material category suitable for high-performance PIBs electrodes,while also provides valuable insights into the new avenues for the high value-added utilization of CTR.
文摘As an emerging electrochemical energy storage technology,potassium-ion batteries(PIBs),which are considered a“beyond Li-ion”battery system,have attracted tremendous attention due to their potential for providing a high energy density,and having abundant resource,and a low cost.However,their commercialization is hindered by the lack of practical anode materials.Among various reported anodes,conventional carbon materials,including graphite,soft carbon,and hard carbon,have emerged as promising candidates because of their abundance,low cost,high conductivity,and tunable structures.However,these materials have problems such as a low initial Coulombic efficiency,significant volume expansion,and unsatisfactory cyclability and rate performance.Various strategies to solve these have been explored,including optimizing the interlayer spacing,structural design,surface coating,constructing a multifunctional framework,and forming composites.This review provides a comprehensive overview of the recent progress in conventional carbon anodes,highlighting structural design strategies,mechanisms for improving the electrochemical performance,and underscores the critical role of these materials in promoting the practical application of PIBs.
文摘Because of their excellent low-temperature(−15 to−40℃)tolerance,sodium-ion batteries are emerging as a complement to lithium-ion batteries for use in extremely cold environments(e.g.high-latitude areas).Hard carbon has a high low-voltage sodium storage capacity and a good initial efficiency,making it one of the most promising anode materials for sodium-ion batteries.It has a complex structure,featuring closed pores,nano graphitic domains,and surface functional groups.The sodium storage sites in hard carbon are reviewed as are the widely accepted sodium storage mechanisms.The main factors contributing to the degradation of the good low-temperature performance in hard carbon anodes are considered,including sodium dendrite formation,low ion diffusion rates,and surface-side reactions.Finally,strategies to increase the low-temperature sodium storage performance of hard carbon anodes are summarized,including bulk structure design,and improvements in interfaces and cut-off voltage.Guidance is provided for improving the low-temperature performance of hard carbon anodes to accelerate the development of these batteries.
文摘Biomass-derived hard carbons,usually prepared by pyrolysis,are widely considered the most promising anode materials for sodium-ion bat-teries(SIBs)due to their high capacity,low poten-tial,sustainability,cost-effectiveness,and environ-mental friendliness.The pyrolysis method affects the microstructure of the material,and ultimately its so-dium storage performance.Our previous work has shown that pyrolysis in a sealed graphite vessel im-proved the sodium storage performance of the car-bon,however the changes in its microstructure and the way this influences the sodium storage are still unclear.A series of hard carbon materials derived from corncobs(CCG-T,where T is the pyrolysis temperature)were pyrolyzed in a sealed graphite vessel at different temperatures.As the pyrolysis temperature increased from 1000 to 1400℃ small carbon domains gradually transformed into long and curved domains.At the same time,a greater number of large open pores with uniform apertures,as well as more closed pores,were formed.With the further increase of pyrolysis temperature to 1600℃,the long and curved domains became longer and straighter,and some closed pores gradually became open.CCG-1400,with abundant closed pores,had a superior SIB performance,with an initial reversible ca-pacity of 320.73 mAh g^(-1) at a current density of 30 mA g^(-1),an initial Coulomb efficiency(ICE)of 84.34%,and a capacity re-tention of 96.70%after 100 cycles.This study provides a method for the precise regulation of the microcrystalline and pore structures of hard carbon materials.
基金supported by the National Natural Science Foundation of China(No.21871133)the Natural Science Foundation of Jiangsu Province(No.BK20211146)the Science,Technology,and Innovation Commission of Shenzhen Municipality(No.JCYJ20180307153251975)。
文摘Phosphorus-based luminescent materials consist of certain phosphorus in the aromatic backbones,endowing a larger nuclear charge(Z,15P),rich valence states for the phosphorus core,and various electron geometries.These features enable promising exploitation for luminescent materials with significant quantum efficiencies and tunable singlet and triplet populations.This mini review focuses on the break-throughs of organic and organometallic phosphorus compounds in advanced circularly polarized fluorescence(CPF)and circularly polarized room-temperature phosphorescence(CP-RTP)by unveiling the structure-function relationships,e.g.,design concept,charge transfer(CT)type,chiral conformation,and excited state transition configuration,and the recent applications in optical information encryption,lighting-displaying,and organic light emitting diodes(OLEDs).By dedicated analysis of current progresses,we hope this work will throw insights into phosphorus-based CPF and CP-RTP behaviors and provide a reference for the rational design of high-performance phosphorus-based emitters.
基金supported by National Natural Science Foundation of China(52371095)Innovation Research Group of Universities in Chongqing(CXQT21030)+2 种基金Chongqing Overseas Chinese Entrepreneurship and Innovation Support Program(cx2023117)Chongqing Natural Science Foundation(CSTB2022NSCQ-LZX0054,CSTB2024TIADCYKJCXX0001)Chongqing Youth Expert Studio。
文摘Mg batteries have high energy density,economic safety,and environmental friendliness.They show great potential as an ideal energy storage technology.This review summarizes the limitations of Mg batteries and explores the complex reactions at the Mg anode/electrolyte interface.It focuses on critical issues such as the dissolution of Mg anodes,the evolution of hydrogen gas,the formation of a passivation layer that hinders Mg^(2+)migration,and dendrite growth.To address these interface problems,the review discusses strategies to improve interface reactions.These include the structural design of Mg anodes,suitable substitute materials for the anode,and artificial solid electrolyte interphase films.Finally,it outlines the future research directions for the ideal Mg anode interfaces.The goal is to develop more efficient interface design schemes and optimization strategies to advance Mg battery technology further.
基金supported by Foshan Introducing Innovative and Entrepreneurial Teams(No.1920001000108)Guangzhou Hongmian Project(No.HMJH-2020-0012).
文摘Biomass-derived hard carbon has gradually become an important component of sodium-ion batteries’anodes.In this work,Setaria viridis,a widely distributed plant,was employed as a precursor to synthesize hard carbon anodes for sodium-ion batteries.However,the hard carbon derived fromrawprecursors contains substantial impurities,which limit the performance of the obtained hard carbon.With different chemical etching processes,the content of impurities in the resultants was reduced to varying degrees.The optimized hard carbon anode delivered a reversible capacity of 198 mAh g-1 at a current density of 0.04 A g^(-1).This work shows the effects of impurities,especially the Si-based matter,on the formation of microstructure and electrochemical performance of the regulated hard carbon,which broadens the application of the biomass-derived materials.This work also provides a strategy for processing impurity-rich biomass precursors to develop hard carbon anodes for sodium-ion batteries(SIBs).
基金financially supported by the Natural Science Foundation of China(Nos.22208214,22005190,and 21938005)the Science&Technology Commission of Shanghai Municipality(Nos.20QB1405700,and 19DZ1205500)Zhejiang Key Research and Development Program(No.2020C01128)
文摘Sodium-ion batteries(SIBs) are promising electrochemical energy storage systems as lithium-ion batteries by virtue of their similar chemical properties and natural abundance and availability.However,the ionic radius of Na^(+)is larger than that of Li^(+),leading to challenges in its insertion/extraction at anode side.As a class of anode materials,phosphorus allotropes(PAs,red,and black) and metal phosphides(MPs) have shown great prospects because of high theoretical gravimetric/volumetric capacity,high carrier mobility,and suitable redox potential.In this review,recent developments in the studies of PAs and MPs with particular emphasis on understanding sodium storage mechanisms,developing novel synthesis strategies,and performance validations have been manifested valuable solutions to address these challenges.We begin with the introduction and classification of the macroscopic sodiation mechanisms of PAs and MPs,and the various fabrication strategies of PAs and MPs are comprehensively summarized in second section.The third section thoroughly reviews the progresses on PAs and MPs-based advanced materials for their application in SIBs.Finally,we also discuss the significant challenges and outline a roadmap for future research directions.
基金financial support by the open foundation of State Key Laboratory of Chemical Engineering(SKL-Ch E-24B03)the Natural Science Foundation of Shandong Province,China(ZR2021QE098)financial support from the Start-Up Research Fund from the University of Macao(SRG2024-00034-IAPME).
文摘Aqueous zinc(Zn)-ion batteries(ZIBs)have garnered significant attention as promising energy storage devices,primarily due to their low cost,high power density,and excellent safety profile.However,the commercial viability of these batteries is hindered by several issues related to the Zn metal anode,including dendritic growth,hydrogen evolution reaction(HER),surface corrosion,and passivation.This review delves into the root causes and key factors influencing these challenges from both electrochemical thermodynamics and kinetics perspectives.Subsequently,viable strategies to mitigate these issues are systematically summarized,including Zn anode reconstruction,artificial solid-electrolyte interphase(SEI)protection,electrolyte formulation optimization,and separator functionalization.Recent research advancements are examined thoroughly,with a focus on the mechanisms behind these approaches and the resulting battery performance.The review also critically assesses the strengths and limitations of these solutions.Finally,we highlight crucial research directions aimed at advancing the practical application of Zn metal anodes in future aqueous ZIBs.
基金financially supported by the National Natural Science Foundation of China(Nos.22302066,52477213 and 52174247)the Science and Technology Innovation Program of Hunan Province(Nos.2022RC1088 and 2024RC3220)+1 种基金the Natural Science Foundation of Hunan Province(No.2023JJ40255)the Scientific Research Foundation of Hunan Provincial Education Department(Nos.22B0599 and 23A0442)
文摘Aqueous zinc-ion batteries(AZIBs)are widely used in energy storage devices due to their low cost and environmental sustainability.Nevertheless,the growth of Zn dendrites and the occurrence of side reactions remain significant barriers to the practical application of AZIBs.Here,a hydrophobic and zinc-compatible solid-electrolyte interface layer of poly(dimethylsiloxane)(PDMS)is in situ grafted on the Zn anode surface via spontaneous hydrolytic condens ation reactions.The high viscoelasticity of PDMS and the chemically formed Si-O-Zn bonds synergistically ensure the adaptability and stability of PDMS on Zn anodes.Moreover,the strong hydrophobicity of PDMS shields the direct contact between the Zn anode and the aqueous electrolyte and further optimizes the reversible plating/stripping of Zn.The symmetrical cell assembled with PDMS@Zn anode displays a long lifespan of over 3000 h at 1 mA cm^(-2)for 1 mAh cm^(-2).The PDMS@Zn‖NH_(4)V_(4)O_(10)full cell maintains the specific capacity of 284.8 mAh g^(-1)after 1200 cycles at 1 A g^(-1).Overall,our work sheds new light on the Zn electrodeposition process under the mediation of anode interface,offers sustainability considerations in designing stable Zn metal anodes,as well as provides a facile and viable path for stabilizing Zn anodes to achieve dendrite-free and long lifespan.
基金supported by the Global Joint Research Program funded by the Pukyong National University(202411790001)the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)+2 种基金funded by the Ministry of Science and ICT(RS-2024-00446825)the Technology Innovation Program(RS-2024-00418815)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)。
文摘Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electrodes'material.However,Mg metal anodes face several challenges,notably the natively existence of an inactive oxide layer on their surfaces,which reduces their effectiveness.Additionally,interactions of Mg electrodes with electrolyte solutions'components can lead to the formation of insulating surface layers,that can fully block them for ions transport.This review addresses these issues by focusing on surface treatments strategies to enhance electrochemical performance of Mg anodes.It highlights chemical and physical modification techniques to prevent oxidation and inactive-layers formation,as well as their practical implications for MIBs.We also examined the impact of Mg anodes'surface engineering on their electrochemical reversibility and cycling efficiency.Finally,future research directions to improve the performance and commercial viability of magnesium anodes and advance development of high-capacity,safe,and cost-effective energy storage systems based on magnesium electrochemistry are discussed.
基金the National Natural Science Foundation of China(32201497)for the financial support of this research。
文摘Silicon(Si)is considered one of the most promising anode materials for next-generation lithium-ion batteries due to its ultrahigh theoretical capacity.However,its application is significantly limited by severe volume expansion,leading to structural degradation and poor cycling stability.Polymer binders play a critical role in addressing these issues by providing mechanical stabilization.Inspired by the mechanically adaptive architecture of spider webs,where stiff radial threads and extensible spiral threads act in synergy,a dual-thread architecture polymer binder(PALT)with energy dissipation ability enabled by integrating rigid and flexible domains is designed.The rigid poly(acrylic acid lithium)(PAALi)segments offer structural reinforcement,while the soft segments(poly(lipoic acid-tannic acid),LT)introduce dynamic covalent bonds and multiple hydrogen bonds that function as reversible sacrificial bonds,enhancing energy dissipation during cycling.Comprehensive experimental and computational analyses demonstrate effectively reduced stress concentration,improved structural integrity,and stable electrochemical performance over prolonged cycling.The silicon anode incorporating the PALT binder exhibits a satisfying capacity loss per cycle of 0.042% during 350 charge/discharge cycles at 3580 m A g^(-1).This work highlights a bioinspired binder design strategy that combines intrinsic rigidity with dynamic stress adaptability to advance the mechanical and electrochemical stability of silicon anodes.
基金the financial support of the National Natural Science Foundation of China(NSFC,No.12074093)。
文摘This study presents a novel approach to enhance silicon anode performance through barium titanate(BTO)incorporation,with the establishment of a force-electric coupling model.By introducing piezoelectric BTO into silicon matrices,we successfully improved both the mechanical stability and electrochemical kinetics of the anode.The developed force-electric coupling model explains how BTO mitigates stress accumulation during lithiation while optimizing the kinetics of Li^(+)and electron transfer.Experimental verification and multiphysical simulation indicate that Si@BTO effectively eliminates structural degradation during the cycling process and significantly reduces the charge transfer resistance.The force-electric coupling mechanism further facilitates stable solid electrolyte interphase(SEI)formation.When paired with LiFePO_(4)cathodes,Si@BTO maintains 76% capacity retention after 500 cycles at a 10 C rate.This work establishes a basic force-electric coupling model framework and offers insights into the development of advanced silicon anode batteries with exceptional performance.
基金funding supports of the National Natural Science Foundation of China(52402315,52172244,51874104,and 52172190)the"Leading Innovative and Entrepreneur Team Introduction Program of Zhejiang"(2023R01007)the Zhejiang Provincial"Jianbing"and"Lingyan"R&D Programs(Grant No.2024C01262)。
文摘Polyacrylic acid(PAA)-based binders have been demonstrated to significantly enhance the cycling stability of pure silicon(Si)anodes compared to other binder types.However,there is a notable lack of systematic and in-depth investigation into the relationship between the molecular weight(MW)of PAA and its performance in pure Si anodes,leading to an absence of reliable theoretical guidance for designing and optimizing of PAA-based binders for these anodes.Herein,we select a series of PAA with varying MWs as binders for Si nanoparticle(SiNP)anodes to systematically identify the optimal MW of PAA for enhancing the electrochemical performance of SiNP anodes.The actual MWs of the various PAA were confirmed by gel permeation chromatography to accurately establish the relationship between MW and binder performance.Within an ultrawide weight average molecular weight(M_(w))range of 35.9-4850 kDa,we identify that the PAA binder with a M_(w)of 1250 kDa(PAA125)exhibits the strongest mechanical strength and the highest adhesion strength,attributed to its favorable molecular chain orientation and robust interchain interactions.These characteristics enable the SiNP anodes utilizing PAA125 to maintain the best interfacial chemistry and bulk mechanical structure stability,leading to optimal electrochemical performance.Notably,the enhancement in cycling stability of SiNP anode by PAA125 under practical application conditions is further validated by the 1.1 Ah LLNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)/SiNP@PAA125 pouch cell.
基金supported by the National Natural Science Foundation of China(No.52001015)the Urban Carbon Neutral Science Innovation Foundation of Beijing University of Technology,China(No.053000514124601)the Science and Technology Program of Beijing Municipal Education Commission,China(No.KM201810005007).
文摘The addition of complexing agents to the electrolyte has been shown to be an effective method to enhance the discharge performance of magnesium-air batteries.In this work,four complexing agents:citric acid(CIT),salicylic acid(SAL),2,6-dihydroxybenzoic acid(2,6-DHB),and 5-sulfoisophthalic acid(5-sulfoSAL)were selected as potential candidates.Through electrochemical tests,full-cell discharge experiments,and physicochemical characterization,the impact of these complexing agents on the discharge performance of magnesium-air batteries using AZ31 alloy as the anode material was investigated.The results demonstrated that the four complexing agents increased the discharge voltage of the batteries.Notably,SAL could significantly improve the anodic efficiency and the discharge specific capacity,achieving an anodic efficiency of 60.3%and a specific capacity of 1358.3 mA·h/g at a discharge current density of 10 mA/cm^(2).
