BACKGROUND The treatment technology of liver cancer is progressing.In addition to traditional surgical resection,combined therapies of immunotherapy based on immune checkpoint inhibitors,chemotherapy,and transcatheter...BACKGROUND The treatment technology of liver cancer is progressing.In addition to traditional surgical resection,combined therapies of immunotherapy based on immune checkpoint inhibitors,chemotherapy,and transcatheter arterial chemoembolization for hepatocellular carcinoma are more and more widely used.Accurate preoperative diagnosis of liver cancer will provide important information for comprehensive treatment and prognosis evaluation of liver cancer.Sonazoidcontrast-enhanced ultrasound is not only helpful for the qualitative diagnosis of liver lesions,but also has great potential in the diagnosis of histological differentiation of liver cancer.AIM To assess the differentiation of hepatocellular carcinoma(HCC)by utilizing the parameters and imaging features of Sonazoid-contrast-enhanced ultrasound(CEUS).METHODS A retrospective analysis was conducted on the CEUS data of 239 lesions through case-control study.These patients received Sonazoid-CEUS within one week before surgery and were confirmed as HCC by postoperative pathology.Within the cases,patients were further categorized into well-differentiated and poorlydifferentiated group.Time-intensity curves of the region of interest in both arterial and Kupffer phases were generated,allowing for the acquisition of quantitative parameters to assess the diagnostic efficacy in distinguishing lesions between these two groups and determining an appropriate cut-off value.RESULTS Univariate analysis showed that the absolute value of enhancement intensity(EIAV),intensity ratio(IR)and intensity difference(ID)in Kupffer phase were statistically different between the groups with different degree(P=0.015,P=0.000,P=0.000).The sensitivity and specificity were 40.2%,82.4%,80.4% and 78.1%,86.9% and 74.5%,respectively,for differentiating HCC lesions with EIAV≥56.384 dB,IR≥1.215 and ID≥9.184 dB.The area under the receiver operating characteristic curve were 0.590,0.877,0.815.There was no significant difference in the parameters of arterial phase,including peak time,initial growth time,rise time and the absolute value of peak intensity of lesions between the two groups(P>0.05).Multivariate analysis showed that the level of alphafetoprotein(AFP)and IR were risk factors for poor differentiation(P=0.001).CONCLUSION Among the parameters of Sonazoid-CEUS,IR in Kupffer phase exhibits superior diagnostic efficacy with high sensitivity and specificity in the diagnose of pathological differentiation of HCC.Combined with preoperative AFP level,a more accurate diagnosis will be obtained.Compared with portal vein phase,Kupffer phase showed the ability to identify HCC lesions more sensitive.These findings hold significant guiding implications and reference value for clinical practice.展开更多
Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecu...Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecular exchange reaction—requires strict control of ambient humidity and immediate thermal annealing treatment,raising manufacturing costs and causing fast nucleation of perovskite films.We report herein a self-buffered molecular migration strategy to slow down the intermolecular exchange reaction by introducing a n-butylammonium bromide shielding layer,which limits moisture diffusion into intermediate-phase film.This further endows the notably wide nucleation time and humidity windows for perovskite crystallization in ambient air.Consequently,the optimized 1.68 e V-bandgap n-i-p structured PSC reaches a record-high reverse-scan(RS)PCE of 22.09%.Furthermore,the versatility and applicability of as-proposed self-buffered molecular migration strategy are certified by employing various shielding materials and 1.53 eV-/1.77 eV-bandgap perovskite materials.The n-i-p structured PSCs based on 1.53 eV-and 1.77 eV-bandgap perovskite films achieve outstanding RS PCEs of 25.23%and 19.09%,respectively,both of which are beyond of the state-of-the-art ambient-air processed PSCs.展开更多
Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection appl...Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection application.However,the presence of larger FA^(+)cation induces to an expansion of the Pb-I octahedral framework,which unfortunately affects both the stability and charge carrier mobility of the corresponding devices.To address this challenge,we develop a novel low-dimensional(HtrzT)PbI_(3) perovskite featuring a conjugated organic cation(1H-1,2,4-Triazole-3-thiol,HtrzT^(+))which matches well with theα-FAPbI_(3) lattices in two-dimensional plane.Benefiting from the matched lattice between(HtrzT)PbI_(3) andα-FAPbI_(3),the anchored lattice enhances the Pb-I bond strength and effectively mitigates the inherent tensile strain of theα-FAPbI_(3) crystal lattice.The X-ray detector based on(HtrzT)PbI_(3)(1.0)/FAPbI_(3) device achieves a remarkable sensitivity up to 1.83×10^(5)μC Gy_(air)^(−1) cm^(−2),along with a low detection limit of 27.6 nGy_(air) s^(−1),attributed to the release of residual stress,and the enhancement in carrier mobility-lifetime product.Furthermore,the detector exhibits outstanding stability under X-ray irradiation with tolerating doses equivalent to nearly 1.17×10^(6) chest imaging doses.展开更多
MPHPB was prepared from melamine,phenylphosphonic acid and boric acid,and its flame retardant effect in PE was investigated.Compared to the intermediate product(melamine phenyl hypophosphite(MPHP)),the residual char i...MPHPB was prepared from melamine,phenylphosphonic acid and boric acid,and its flame retardant effect in PE was investigated.Compared to the intermediate product(melamine phenyl hypophosphite(MPHP)),the residual char increased from 17.9% of MPHP to 41.2% of MPHPB at 800℃.The limiting oxygen index(LOI)of PE/20%MPHPB is 23.6%,which reaches V-0 rating.After the addition of 20%MPHPB,the total heat release(THR),peak heat release rate(pK-HRR),and average effective thermal combustion rates(av-EHC)of PE decreased.Additionally,characterizations including the pyrolysis gas chromatography-mass spectrometry(Py-GC-MS),scanning electron microscopy(SEM),raman spectroscopy test(LRS)and fourier transform infrared(FT-IR)were taken to investigate the flame retardant mechanism,and the results show that MPHPB plays roles in both gas and condensed phases.展开更多
Traumatic spinal cord injury result in considerable and lasting functional impairments,triggering complex inflammatory and pathological events.Spinal cord scars,often metaphorically referred to as“fire barriers,”aim...Traumatic spinal cord injury result in considerable and lasting functional impairments,triggering complex inflammatory and pathological events.Spinal cord scars,often metaphorically referred to as“fire barriers,”aim to control the spread of neuroinflammation during the acute phase but later hinder axon regeneration in later stages.Recent studies have enhanced our understanding of immunomodulation,revealing that injury-associated inflammation involves various cell types and molecules with positive and negative effects.This review employs bibliometric analysis to examine the literature on inflammatory mediators in spinal cord injury,highlighting recent research and providing a comprehensive overview of the current state of research and the latest advances in studies on neuroinflammation related to spinal cord injury.We summarize the immune and inflammatory responses at different stages of spinal cord injury,offering crucial insights for future research.Additionally,we review repair strategies based on inflammatory mediators for the injured spinal cord.Finally,this review discusses the current status and future directions of translational research focused on immune-targeting strategies,including pharmaceuticals,biomedical engineering,and gene therapy.The development of a combined,precise,and multitemporal strategy for the repair of injured spinal cords represents a promising direction for future research.展开更多
Spinal cord injury is an intractable traumatic injury. The most common hurdles faced during spinal cord injury are failure of axonal regrowth and reconnection to target sites. These also tend to be the most challengin...Spinal cord injury is an intractable traumatic injury. The most common hurdles faced during spinal cord injury are failure of axonal regrowth and reconnection to target sites. These also tend to be the most challenging issues in spinal cord injury. As spinal cord injury progresses to the chronic phase, lost motor and sensory functions are not recovered. Several reasons may be attributed to the failure of recovery from chronic spinal cord injury. These include factors that inhibit axonal growth such as activated astrocytes, chondroitin sulfate proteoglycan, myelin-associated proteins, inflammatory microglia, and fibroblasts that accumulate at lesion sites. Skeletal muscle atrophy due to denervation is another chronic and detrimental spinal cord injury–specific condition. Although several intervention strategies based on multiple outlooks have been attempted for treating spinal cord injury, few approaches have been successful. To treat chronic spinal cord injury, neural cells or tissue substitutes may need to be supplied in the cavity area to enable possible axonal growth. Additionally, stimulating axonal growth activity by extrinsic factors is extremely important and essential for maintaining the remaining host neurons and transplanted neurons. This review focuses on pharmacotherapeutic approaches using small compounds and proteins to enable axonal growth in chronic spinal cord injury. This review presents some of these candidates that have shown promising outcomes in basic research(in vivo animal studies) and clinical trials: AA-NgR(310)ecto-Fc(AXER-204), fasudil, phosphatase and tensin homolog protein antagonist peptide 4, chondroitinase ABC, intracellular sigma peptide,(-)-epigallocatechin gallate, matrine, acteoside, pyrvate kinase M2, diosgenin, granulocyte-colony stimulating factor, and fampridine-sustained release. Although the current situation suggests that drug-based therapies to recover function in chronic spinal cord injury are limited, potential candidates have been identified through basic research, and these candidates may be subjects of clinical studies in the future. Moreover, cocktail therapy comprising drugs with varied underlying mechanisms may be effective in treating the refractory status of chronic spinal cord injury.展开更多
Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significan...Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.展开更多
As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding...As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding scenarios.This paper discusses interferogram modeling and phase distortion cor-rection techniques for spaceborne DASH interferometers.The modeling of phase distortion interferograms with and without Doppler shift for limb observation was conducted,and the effectiveness of the analytical expression was verified through numerical simulation.The simulation results indicate that errors propagate layer by layer while using the onion-peeling inversion algorithm to handle phase-distorted interferograms.In contrast,the phase distortion correction algorithm can achieve effective correction.This phase correction method can be successfully applied to correct phase distortions in the interferograms of the spaceborne DASH interferometer,providing a feasible solution to enhance its measurement accuracy.展开更多
Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,p...Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.展开更多
Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductiv...Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.展开更多
Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is p...Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.展开更多
In recent years,sodium-ion batteries(SIBs)have become one of the hot discussions and have gradually moved toward industrialization.However,there are still some shortcomings in their performance that have not been well...In recent years,sodium-ion batteries(SIBs)have become one of the hot discussions and have gradually moved toward industrialization.However,there are still some shortcomings in their performance that have not been well addressed,including phase transition,structural degradation,and voltage platform.High entropy materials have recently gained significant attention from researchers due to their effects on thermodynamics,dynamics,structure,and performance.Researchers have attempted to use these materials in sodium-ion batteries to overcome their problems,making it a modification method.This paper aims to discuss the research status of high-entropy cathode materials for sodium-ion batteries and summarize their effects on sodium-ion batteries from three perspectives:Layered oxide,polyanion,and Prussian blue.The infiuence on material structure,the inhibition of phase transition,and the improvement of ion diffusivity are described.Finally,the advantages and disadvantages of high-entropy cathode materials for sodium-ion batteries are summarized,and their future development has prospected.展开更多
Objective This study aimed to study the effects of different crystalline states of Sheng Shigao(raw gypsum,RG)and its inorganic elements on the antipyretic efficacy of Baihu Decoction(BHT).Methods RG samples calcined ...Objective This study aimed to study the effects of different crystalline states of Sheng Shigao(raw gypsum,RG)and its inorganic elements on the antipyretic efficacy of Baihu Decoction(BHT).Methods RG samples calcined at different temperatures were prepared.The phase composition of RG and Duan Shigao(calcination of gypsum,CG)as well as the changes in phase composition before and after adding water to RG calcined at specific temperatures,were determined using X-ray diffraction(XRD).A fever model was established by subcutaneously injecting 20%yeast suspension(10 mL·kg~(-1))into the backs of rats.The effects of BHT containing RG in different crystalline states on rat body temperature were measured.Serum levels of IL-1β,IL-6,and hypothalamic prostaglandin E2(PGE_2)were detected using ELISA.Serum Ca~(2+)levels were measured using a microplate method.The content of trace elements in RG and CG and the corresponding freeze-dried BHT powder was determined using inductively coupled plasma mass spectrometry(ICP-MS).The complexation of representative inorganic elements with mangiferin,a major active component in BHT,was investigated using UV-Vis spectroscopy and fluorescence spectroscopy.A validation model was established using RAW264.7 mouse macrophages.Drug-containing serum of BHT with different inorganic elements was prepared,and the nitric oxide(NO)levels in the cell supernatant of different treatment groups were measured using the Griess method.The mRNA levels of IL-6,TNF-α,and PGE2in each group were detected using qPCR(real-time fluorescent quantitative PCR).Results After calcination,the phase composition of RG changed,and the content of inorganic elements in RG,CG170(RG calcined at 170°C),and CG350(RG calcined at 350°C)showed similar trends.Compared with RG,the content of Ca,Sr,Al,and Na in CG changed significantly.Compared with BHT,the content of Ca,Sr,Si,and Na in CG changed significantly when incorporated into the formula.Intermolecular interactions confirmed strong binding between mangiferin and Cu~(2+)and Al~(3+).Cu~(2+)and Fe~(3+)exhibited fluorescence quenching effects on mangiferin solution,while Al~(3+)and Zn~(2+)showed strong fluorescence enhancement,with fluorescence intensity increasing by 120-fold and 30-fold,respectively.In vitro evaluation of synergistic anti-inflammatory effects confirmed that Ca,Fe,Cr,Al,and Si exhibited synergistic anti-inflammatory effects.Conclusion The crystalline state of RG has little effect on its antipyretic properties,while Ca,Sr,Na,Fe,and Al are likely the key material bases influencing its efficacy.展开更多
For the development of high-performance metallic glasses,enhancing their stability against viscous flow and crystallization is a primary objective.Vapor deposition or prolonged annealing is an effective method to impr...For the development of high-performance metallic glasses,enhancing their stability against viscous flow and crystallization is a primary objective.Vapor deposition or prolonged annealing is an effective method to improve glass stability,shown by increased glass transition temperature(Tg)and crystallization temperature(Tx).This contributes to the development of ultra-stable metallic glasses.Herein,we demonstrate that modulating the quenching temperature can also produce ultra-stable metallic glasses,as evidenced by an increase in Tx of 17-30 K in Cu-based metallic glasses.By modulating the quenching temperature,separated primary phases,secondary phases,and even nano-oxides can be obtained in the metallic glasses.Notably,metastable phases such as Cu-rich precipitates arising from secondary phase separation play a crucial role in enhancing glass stability.However,the enhancement of the stability of the glass has only a negligible effect on its mechanical properties.This study implies that different melt thermodynamic states generated by liquid-liquid separation and transition collectively determine the frozen-in glass structure.The results of this study will be helpful for the development of ultra-stable bulk glasses.展开更多
Diatomic metasurfaces designed for interferometric mechanisms possess significant potential for the multidimensional manipulation of electromagnetic waves,including control over amplitude,phase,frequency,and polarizat...Diatomic metasurfaces designed for interferometric mechanisms possess significant potential for the multidimensional manipulation of electromagnetic waves,including control over amplitude,phase,frequency,and polarization.Geometric phase profiles with spin-selective properties are commonly associated with wavefront modulation,allowing the implementation of conjugate strategies within orthogonal circularly polarized channels.Simultaneous control of these characteristics in a single-layered diatomic metasurface will be an apparent technological extension.Here,spin-selective modulation of terahertz(THz)beams is realized by assembling a pair of meta-atoms with birefringent effects.The distinct modulation functions arise from geometric phase profiles characterized by multiple rotational properties,which introduce independent parametric factors that elucidate their physical significance.By arranging the key parameters,the proposed design strategy can be employed to realize independent amplitude and phase manipulation.A series of THz metasurface samples with specific modulation functions are characterized,experimentally demonstrating the accuracy of on-demand manipulation.This research paves the way for all-silicon meta-optics that may have great potential in imaging,sensing and detection.展开更多
Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-...Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.展开更多
With the rapid development of artificial intelligence,magnetocaloric materials as well as other materials are being developed with increased efficiency and enhanced performance.However,most studies do not take phase t...With the rapid development of artificial intelligence,magnetocaloric materials as well as other materials are being developed with increased efficiency and enhanced performance.However,most studies do not take phase transitions into account,and as a result,the predictions are usually not accurate enough.In this context,we have established an explicable relationship between alloy compositions and phase transition by feature imputation.A facile machine learning is proposed to screen candidate NiMn-based Heusler alloys with desired magnetic entropy change and magnetic transition temperature with a high accuracy R^(2)≈0.98.As expected,the measured properties of prepared NiMn-based alloys,including phase transition type,magnetic entropy changes and transition temperature,are all in good agreement with the ML predictions.As well as being the first to demonstrate an explicable relationship between alloy compositions,phase transitions and magnetocaloric properties,our proposed ML model is highly predictive and interpretable,which can provide a strong theoretical foundation for identifying high-performance magnetocaloric materials in the future.展开更多
Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+d...Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.展开更多
文摘BACKGROUND The treatment technology of liver cancer is progressing.In addition to traditional surgical resection,combined therapies of immunotherapy based on immune checkpoint inhibitors,chemotherapy,and transcatheter arterial chemoembolization for hepatocellular carcinoma are more and more widely used.Accurate preoperative diagnosis of liver cancer will provide important information for comprehensive treatment and prognosis evaluation of liver cancer.Sonazoidcontrast-enhanced ultrasound is not only helpful for the qualitative diagnosis of liver lesions,but also has great potential in the diagnosis of histological differentiation of liver cancer.AIM To assess the differentiation of hepatocellular carcinoma(HCC)by utilizing the parameters and imaging features of Sonazoid-contrast-enhanced ultrasound(CEUS).METHODS A retrospective analysis was conducted on the CEUS data of 239 lesions through case-control study.These patients received Sonazoid-CEUS within one week before surgery and were confirmed as HCC by postoperative pathology.Within the cases,patients were further categorized into well-differentiated and poorlydifferentiated group.Time-intensity curves of the region of interest in both arterial and Kupffer phases were generated,allowing for the acquisition of quantitative parameters to assess the diagnostic efficacy in distinguishing lesions between these two groups and determining an appropriate cut-off value.RESULTS Univariate analysis showed that the absolute value of enhancement intensity(EIAV),intensity ratio(IR)and intensity difference(ID)in Kupffer phase were statistically different between the groups with different degree(P=0.015,P=0.000,P=0.000).The sensitivity and specificity were 40.2%,82.4%,80.4% and 78.1%,86.9% and 74.5%,respectively,for differentiating HCC lesions with EIAV≥56.384 dB,IR≥1.215 and ID≥9.184 dB.The area under the receiver operating characteristic curve were 0.590,0.877,0.815.There was no significant difference in the parameters of arterial phase,including peak time,initial growth time,rise time and the absolute value of peak intensity of lesions between the two groups(P>0.05).Multivariate analysis showed that the level of alphafetoprotein(AFP)and IR were risk factors for poor differentiation(P=0.001).CONCLUSION Among the parameters of Sonazoid-CEUS,IR in Kupffer phase exhibits superior diagnostic efficacy with high sensitivity and specificity in the diagnose of pathological differentiation of HCC.Combined with preoperative AFP level,a more accurate diagnosis will be obtained.Compared with portal vein phase,Kupffer phase showed the ability to identify HCC lesions more sensitive.These findings hold significant guiding implications and reference value for clinical practice.
基金the financial support from the National Key R&D Program of China(2021YFF0500500)the National Natural Science Foundation of China(62474131,62274132,and 62204189)。
文摘Ambient-air,moisture-assisted annealing is widely used in fabricating perovskite solar cells(PSCs).However,the inherent sensitivity of perovskite intermediate-phase to moisture—due to fast and spontaneous intermolecular exchange reaction—requires strict control of ambient humidity and immediate thermal annealing treatment,raising manufacturing costs and causing fast nucleation of perovskite films.We report herein a self-buffered molecular migration strategy to slow down the intermolecular exchange reaction by introducing a n-butylammonium bromide shielding layer,which limits moisture diffusion into intermediate-phase film.This further endows the notably wide nucleation time and humidity windows for perovskite crystallization in ambient air.Consequently,the optimized 1.68 e V-bandgap n-i-p structured PSC reaches a record-high reverse-scan(RS)PCE of 22.09%.Furthermore,the versatility and applicability of as-proposed self-buffered molecular migration strategy are certified by employing various shielding materials and 1.53 eV-/1.77 eV-bandgap perovskite materials.The n-i-p structured PSCs based on 1.53 eV-and 1.77 eV-bandgap perovskite films achieve outstanding RS PCEs of 25.23%and 19.09%,respectively,both of which are beyond of the state-of-the-art ambient-air processed PSCs.
基金supports from the National Natural Science Foundation of China(22375220,U2001214,22471302)the Guangdong Basic and Applied Basic Research Foundation(2024B1515020101)Open Project Fund from State Key Laboratory of Optoelectronic Materials and Technologies(OEMT-2024-KF-08).
文摘Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection application.However,the presence of larger FA^(+)cation induces to an expansion of the Pb-I octahedral framework,which unfortunately affects both the stability and charge carrier mobility of the corresponding devices.To address this challenge,we develop a novel low-dimensional(HtrzT)PbI_(3) perovskite featuring a conjugated organic cation(1H-1,2,4-Triazole-3-thiol,HtrzT^(+))which matches well with theα-FAPbI_(3) lattices in two-dimensional plane.Benefiting from the matched lattice between(HtrzT)PbI_(3) andα-FAPbI_(3),the anchored lattice enhances the Pb-I bond strength and effectively mitigates the inherent tensile strain of theα-FAPbI_(3) crystal lattice.The X-ray detector based on(HtrzT)PbI_(3)(1.0)/FAPbI_(3) device achieves a remarkable sensitivity up to 1.83×10^(5)μC Gy_(air)^(−1) cm^(−2),along with a low detection limit of 27.6 nGy_(air) s^(−1),attributed to the release of residual stress,and the enhancement in carrier mobility-lifetime product.Furthermore,the detector exhibits outstanding stability under X-ray irradiation with tolerating doses equivalent to nearly 1.17×10^(6) chest imaging doses.
基金Funded by the Natural Science Foundation of Guangdong(Nos.2014A030313241,2014B090901068,and 2016A010103003)。
文摘MPHPB was prepared from melamine,phenylphosphonic acid and boric acid,and its flame retardant effect in PE was investigated.Compared to the intermediate product(melamine phenyl hypophosphite(MPHP)),the residual char increased from 17.9% of MPHP to 41.2% of MPHPB at 800℃.The limiting oxygen index(LOI)of PE/20%MPHPB is 23.6%,which reaches V-0 rating.After the addition of 20%MPHPB,the total heat release(THR),peak heat release rate(pK-HRR),and average effective thermal combustion rates(av-EHC)of PE decreased.Additionally,characterizations including the pyrolysis gas chromatography-mass spectrometry(Py-GC-MS),scanning electron microscopy(SEM),raman spectroscopy test(LRS)and fourier transform infrared(FT-IR)were taken to investigate the flame retardant mechanism,and the results show that MPHPB plays roles in both gas and condensed phases.
基金supported by the National Natural Science Foundation of China,Nos.82272470 (to GN),82072439 (to GN),81930070 (to SF)the Tianjin Health Key Discipline Special Project,No.TJWJ2022XK011 (to GN)+2 种基金the Outstanding Youth Foundation of Tianjin Medical University General Hospital,No.22ZYYJQ01 (to GN)Tianjin Key Medical Disciplines,No.TJYXZDXK-027A (to SF)National Key Research and Development Program-Stem Cells and Transformation Research,No.2019YFA0112100 (to SF)
文摘Traumatic spinal cord injury result in considerable and lasting functional impairments,triggering complex inflammatory and pathological events.Spinal cord scars,often metaphorically referred to as“fire barriers,”aim to control the spread of neuroinflammation during the acute phase but later hinder axon regeneration in later stages.Recent studies have enhanced our understanding of immunomodulation,revealing that injury-associated inflammation involves various cell types and molecules with positive and negative effects.This review employs bibliometric analysis to examine the literature on inflammatory mediators in spinal cord injury,highlighting recent research and providing a comprehensive overview of the current state of research and the latest advances in studies on neuroinflammation related to spinal cord injury.We summarize the immune and inflammatory responses at different stages of spinal cord injury,offering crucial insights for future research.Additionally,we review repair strategies based on inflammatory mediators for the injured spinal cord.Finally,this review discusses the current status and future directions of translational research focused on immune-targeting strategies,including pharmaceuticals,biomedical engineering,and gene therapy.The development of a combined,precise,and multitemporal strategy for the repair of injured spinal cords represents a promising direction for future research.
文摘Spinal cord injury is an intractable traumatic injury. The most common hurdles faced during spinal cord injury are failure of axonal regrowth and reconnection to target sites. These also tend to be the most challenging issues in spinal cord injury. As spinal cord injury progresses to the chronic phase, lost motor and sensory functions are not recovered. Several reasons may be attributed to the failure of recovery from chronic spinal cord injury. These include factors that inhibit axonal growth such as activated astrocytes, chondroitin sulfate proteoglycan, myelin-associated proteins, inflammatory microglia, and fibroblasts that accumulate at lesion sites. Skeletal muscle atrophy due to denervation is another chronic and detrimental spinal cord injury–specific condition. Although several intervention strategies based on multiple outlooks have been attempted for treating spinal cord injury, few approaches have been successful. To treat chronic spinal cord injury, neural cells or tissue substitutes may need to be supplied in the cavity area to enable possible axonal growth. Additionally, stimulating axonal growth activity by extrinsic factors is extremely important and essential for maintaining the remaining host neurons and transplanted neurons. This review focuses on pharmacotherapeutic approaches using small compounds and proteins to enable axonal growth in chronic spinal cord injury. This review presents some of these candidates that have shown promising outcomes in basic research(in vivo animal studies) and clinical trials: AA-NgR(310)ecto-Fc(AXER-204), fasudil, phosphatase and tensin homolog protein antagonist peptide 4, chondroitinase ABC, intracellular sigma peptide,(-)-epigallocatechin gallate, matrine, acteoside, pyrvate kinase M2, diosgenin, granulocyte-colony stimulating factor, and fampridine-sustained release. Although the current situation suggests that drug-based therapies to recover function in chronic spinal cord injury are limited, potential candidates have been identified through basic research, and these candidates may be subjects of clinical studies in the future. Moreover, cocktail therapy comprising drugs with varied underlying mechanisms may be effective in treating the refractory status of chronic spinal cord injury.
基金financially supported by the National Natural Science Foundation of China(52373271)Science,Technology and Innovation Commission of Shenzhen Municipality under Grant(KCXFZ20201221173004012)+1 种基金National Key Research and Development Program of Shaanxi Province(No.2023-YBNY-271)Open Testing Foundation of the Analytical&Testing Center of Northwestern Polytechnical University(2023T019).
文摘Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching,adjusting dielectric/magnetic resonance and promoting electromagnetic(EM)wave absorption,but still exist a significant challenging in regulating local phase evolution.Herein,accordion-shaped Co/Co_(3)O_(4)@N-doped carbon nanosheets(Co/Co_(3)O_(4)@NC)with gradient magnetic heterointerfaces have been fabricated via the cooperative high-temperature carbonization and lowtemperature oxidation process.The results indicate that the surface epitaxial growth of crystal Co_(3)O_(4) domains on local Co nanoparticles realizes the adjustment of magnetic-heteroatomic components,which are beneficial for optimizing impedance matching and interfacial polarization.Moreover,gradient magnetic heterointerfaces simultaneously realize magnetic coupling,and long-range magnetic diffraction.Specifically,the synthesized Co/Co_(3)O_(4)@NC absorbents display the strong electromagnetic wave attenuation capability of−53.5 dB at a thickness of 3.0 mm with an effective absorption bandwidth of 5.36 GHz,both are superior to those of single magnetic domains embedded in carbon matrix.This design concept provides us an inspiration in optimizing interfacial polarization,regulating magnetic coupling and promoting electromagnetic wave absorption.
文摘As an advanced device for observing atmospheric winds,the spaceborne Doppler Asymmetric Spatial Heterodyne(DASH)interferometer also encounters challenges associated with phase distortion,par-ticularly in limb sounding scenarios.This paper discusses interferogram modeling and phase distortion cor-rection techniques for spaceborne DASH interferometers.The modeling of phase distortion interferograms with and without Doppler shift for limb observation was conducted,and the effectiveness of the analytical expression was verified through numerical simulation.The simulation results indicate that errors propagate layer by layer while using the onion-peeling inversion algorithm to handle phase-distorted interferograms.In contrast,the phase distortion correction algorithm can achieve effective correction.This phase correction method can be successfully applied to correct phase distortions in the interferograms of the spaceborne DASH interferometer,providing a feasible solution to enhance its measurement accuracy.
基金Key R&D Plan of Shaanxi Province(2021LLRH-05-09)Shaanxi Province Youth Talent Support Program Project(CLGC202234)Sponsored by Innovative Pilot Platform for Layered Metal Composite Materials(2024CX-GXPT-20)。
文摘Zirconium-titanium-steel composite plate with the size of 2500 mm×7800 mm×(3+0.7+22)mm was prepared by explosive welding+rolling method,and its properties were analyzed by ultrasonic nondestructive testing,phased array waveform shape,interface structure shape,electronic scanning,and mechanical property testing.Results show that the rolling temperature of zirconiumtitanium complex should be controlled at 760°C,and the rolling reduction of each pass should be controlled at 10%–25%.The explosive velocity to prepare zirconium-titanium-steel composite plates should be controlled at 2450–2500 m/s,the density should be 0.78 g/cm3,the stand-off height should be 12 mm,and the explosive height of Zone A and Zone B should be 45–50 mm.Explosive welding combined with rolling method reduces the impact of explosive welding and multiple heat treatment on material properties.Meanwhile,the problems of surface wrinkling and cracking,which occur during the preparation process of large-sized zirconiumtitanium-steel composite plate,can be solved.
基金supported by the National Natural Science Foundation of China(No.52127816),the National Key Research and Development Program of China(No.2020YFA0715000)the National Natural Science and Hong Kong Research Grant Council Joint Research Funding Project of China(No.5181101182)the NSFC/RGC Joint Research Scheme sponsored by the Research Grants Council of Hong Kong and the National Natural Science Foundation of China(No.N_PolyU513/18).
文摘Latent heat thermal energy storage(TES)effectively reduces the mismatch between energy supply and demand of renewable energy sources by the utilization of phase change materials(PCMs).However,the low thermal conductivity and poor shape stability are the main drawbacks in realizing the large-scale application of PCMs.Promisingly,developing composite PCM(CPCM)based on porous supporting mate-rial provides a desirable solution to obtain performance-enhanced PCMs with improved effective thermal conductivity and shape stability.Among all the porous matrixes as supports for PCM,three-dimensional carbon-based porous supporting material has attracted considerable attention ascribing to its high ther-mal conductivity,desirable loading capacity of PCMs,and excellent chemical compatibility with various PCMs.Therefore,this work systemically reviews the CPCMs with three-dimensional carbon-based porous supporting materials.First,a concise rule for the fabrication of CPCMs is illustrated in detail.Next,the experimental and computational research of carbon nanotube-based support,graphene-based support,graphite-based support and amorphous carbon-based support are reviewed.Then,the applications of the shape-stabilized CPCMs including thermal management and thermal conversion are illustrated.Last but not least,the challenges and prospects of the CPCMs are discussed.To conclude,introducing carbon-based porous materials can solve the liquid leakage issue and essentially improve the thermal conductivity of PCMs.However,there is still a long way to further develop a desirable CPCM with higher latent heat capacity,higher thermal conductivity,and more excellent shape stability.
基金supported by the National Natural Science Foundation of China(Grant Nos.U20B2013 and 12205286)the National Key Research and Development Program of China(Grant No.2022YFB1902401)。
文摘Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.
基金the National Natural Science Foundation of China Key Program(No.U22A20420)Changzhou Leading Innovative Talents Introduction and Cultivation Project(No.CQ20230109)for supporting our work。
文摘In recent years,sodium-ion batteries(SIBs)have become one of the hot discussions and have gradually moved toward industrialization.However,there are still some shortcomings in their performance that have not been well addressed,including phase transition,structural degradation,and voltage platform.High entropy materials have recently gained significant attention from researchers due to their effects on thermodynamics,dynamics,structure,and performance.Researchers have attempted to use these materials in sodium-ion batteries to overcome their problems,making it a modification method.This paper aims to discuss the research status of high-entropy cathode materials for sodium-ion batteries and summarize their effects on sodium-ion batteries from three perspectives:Layered oxide,polyanion,and Prussian blue.The infiuence on material structure,the inhibition of phase transition,and the improvement of ion diffusivity are described.Finally,the advantages and disadvantages of high-entropy cathode materials for sodium-ion batteries are summarized,and their future development has prospected.
基金Joint Fund Project of the Henan Provincial Science and Technology Research and Development Plan(222301420060)。
文摘Objective This study aimed to study the effects of different crystalline states of Sheng Shigao(raw gypsum,RG)and its inorganic elements on the antipyretic efficacy of Baihu Decoction(BHT).Methods RG samples calcined at different temperatures were prepared.The phase composition of RG and Duan Shigao(calcination of gypsum,CG)as well as the changes in phase composition before and after adding water to RG calcined at specific temperatures,were determined using X-ray diffraction(XRD).A fever model was established by subcutaneously injecting 20%yeast suspension(10 mL·kg~(-1))into the backs of rats.The effects of BHT containing RG in different crystalline states on rat body temperature were measured.Serum levels of IL-1β,IL-6,and hypothalamic prostaglandin E2(PGE_2)were detected using ELISA.Serum Ca~(2+)levels were measured using a microplate method.The content of trace elements in RG and CG and the corresponding freeze-dried BHT powder was determined using inductively coupled plasma mass spectrometry(ICP-MS).The complexation of representative inorganic elements with mangiferin,a major active component in BHT,was investigated using UV-Vis spectroscopy and fluorescence spectroscopy.A validation model was established using RAW264.7 mouse macrophages.Drug-containing serum of BHT with different inorganic elements was prepared,and the nitric oxide(NO)levels in the cell supernatant of different treatment groups were measured using the Griess method.The mRNA levels of IL-6,TNF-α,and PGE2in each group were detected using qPCR(real-time fluorescent quantitative PCR).Results After calcination,the phase composition of RG changed,and the content of inorganic elements in RG,CG170(RG calcined at 170°C),and CG350(RG calcined at 350°C)showed similar trends.Compared with RG,the content of Ca,Sr,Al,and Na in CG changed significantly.Compared with BHT,the content of Ca,Sr,Si,and Na in CG changed significantly when incorporated into the formula.Intermolecular interactions confirmed strong binding between mangiferin and Cu~(2+)and Al~(3+).Cu~(2+)and Fe~(3+)exhibited fluorescence quenching effects on mangiferin solution,while Al~(3+)and Zn~(2+)showed strong fluorescence enhancement,with fluorescence intensity increasing by 120-fold and 30-fold,respectively.In vitro evaluation of synergistic anti-inflammatory effects confirmed that Ca,Fe,Cr,Al,and Si exhibited synergistic anti-inflammatory effects.Conclusion The crystalline state of RG has little effect on its antipyretic properties,while Ca,Sr,Na,Fe,and Al are likely the key material bases influencing its efficacy.
基金supported by the National Natural Science Foundation of China(Nos.51827801,52371152,and 51971120).
文摘For the development of high-performance metallic glasses,enhancing their stability against viscous flow and crystallization is a primary objective.Vapor deposition or prolonged annealing is an effective method to improve glass stability,shown by increased glass transition temperature(Tg)and crystallization temperature(Tx).This contributes to the development of ultra-stable metallic glasses.Herein,we demonstrate that modulating the quenching temperature can also produce ultra-stable metallic glasses,as evidenced by an increase in Tx of 17-30 K in Cu-based metallic glasses.By modulating the quenching temperature,separated primary phases,secondary phases,and even nano-oxides can be obtained in the metallic glasses.Notably,metastable phases such as Cu-rich precipitates arising from secondary phase separation play a crucial role in enhancing glass stability.However,the enhancement of the stability of the glass has only a negligible effect on its mechanical properties.This study implies that different melt thermodynamic states generated by liquid-liquid separation and transition collectively determine the frozen-in glass structure.The results of this study will be helpful for the development of ultra-stable bulk glasses.
基金supports from National Key Research and Development Program of China(2021YFB2800703)Sichuan Province Science and Technology Support Program(25QNJJ2419)+1 种基金National Natural Science Foundation of China(U22A2008,12404484)Laoshan Laboratory Science and Technology Innovation Project(LSKJ202200801).
文摘Diatomic metasurfaces designed for interferometric mechanisms possess significant potential for the multidimensional manipulation of electromagnetic waves,including control over amplitude,phase,frequency,and polarization.Geometric phase profiles with spin-selective properties are commonly associated with wavefront modulation,allowing the implementation of conjugate strategies within orthogonal circularly polarized channels.Simultaneous control of these characteristics in a single-layered diatomic metasurface will be an apparent technological extension.Here,spin-selective modulation of terahertz(THz)beams is realized by assembling a pair of meta-atoms with birefringent effects.The distinct modulation functions arise from geometric phase profiles characterized by multiple rotational properties,which introduce independent parametric factors that elucidate their physical significance.By arranging the key parameters,the proposed design strategy can be employed to realize independent amplitude and phase manipulation.A series of THz metasurface samples with specific modulation functions are characterized,experimentally demonstrating the accuracy of on-demand manipulation.This research paves the way for all-silicon meta-optics that may have great potential in imaging,sensing and detection.
基金financially supported by the National Key Re-search and Development Program of China(No.2021YFB3702604)the National Natural Science Foundation of China(No.52174377)+1 种基金the Chongqing Natural Science Foundation Project(No.CSTB2023NSCQ-MSX0824)This work was also supported by the Shaanxi Materials Analysis&Research Center and the Analytical&Testing Center of NPU.
文摘Theβsolidifiedγ-TiAl alloy holds important application value in the aerospace industry,while its com-plex phase compositions and geometric structures pose challenges to its microstructure control during the thermal-mechanical process.The microstructure evolution of Ti-43Al-4Nb-1Mo-0.2B alloy at 1200℃/0.01 s−1 was investigated to clarify the coupling role of dynamic recrystallization(DRX)and phase transformation.The results revealed that the rate of DRX inα2+γlamellar colonies was comparatively slower than that inβo+γmixed structure,instead being accompanied by intense lamellar kinking and rotation.The initiation and development rates of DRX inα2,βo,andγphases decreased sequentially.The asynchronous DRX of the various geometric structures and phase compositions resulted in the un-even deformed microstructure,and the dynamic softening induced by lamellar kinking and rotation was replaced by strengthened DRX as strain increased.Additionally,the blockyα2 phase and the terminals ofα2 lamellae were the preferential DRX sites owing to the abundant activated slip systems.Theα2→βo transformation within lamellar colonies facilitated DRX and fragment ofα2 lamellae,while theα2→γtransformation promoted the decomposition ofα2 lamellae and DRX ofγlamellae.Moreover,the var-iedβo+γmixed structures underwent complicated evolution:(1)Theγ→βo transformation occurred at boundaries of lamellar colonies,followed by simultaneous DRX ofγlamellar terminals and neighboringβo phase;(2)DRX occurred earlier within the band-likeβo phase,with the delayed DRX in enclosedγphase;(3)DRX within theβo synapses and neighboringγphase was accelerated owing to generation of elastic stress field;(4)Dispersedβo particles triggered particle stimulated nucleation(PSN)ofγphase.Eventually,atomic diffusion along crystal defects inβo andγphases caused fracture of band-likeβo phase and formation of massiveβo particles,impeding grain boundary migration and hindering DRXed grain growth ofγphase.
基金supported by the National Key R&D Program of China(No.2022YFE0109500)the National Natural Science Foundation of China(Nos.52071255,52301250,52171190 and 12304027)+2 种基金the Key R&D Project of Shaanxi Province(No.2022GXLH-01-07)the Fundamental Research Funds for the Central Universities(China)the World-Class Universities(Disciplines)and the Characteristic Development Guidance Funds for the Central Universities.
文摘With the rapid development of artificial intelligence,magnetocaloric materials as well as other materials are being developed with increased efficiency and enhanced performance.However,most studies do not take phase transitions into account,and as a result,the predictions are usually not accurate enough.In this context,we have established an explicable relationship between alloy compositions and phase transition by feature imputation.A facile machine learning is proposed to screen candidate NiMn-based Heusler alloys with desired magnetic entropy change and magnetic transition temperature with a high accuracy R^(2)≈0.98.As expected,the measured properties of prepared NiMn-based alloys,including phase transition type,magnetic entropy changes and transition temperature,are all in good agreement with the ML predictions.As well as being the first to demonstrate an explicable relationship between alloy compositions,phase transitions and magnetocaloric properties,our proposed ML model is highly predictive and interpretable,which can provide a strong theoretical foundation for identifying high-performance magnetocaloric materials in the future.
基金supported by the National Natural Science Foundation of China(No.21805018)by Sichuan Science and Technology Program(Nos.2022ZHCG0018,2023NSFSC0117 and 2023ZHCG0060)Yibin Science and Technology Program(No.2022JB005)and China Postdoctoral Science Foundation(No.2022M722704).
文摘Layered transition metal oxides have emerged as promising cathode materials for sodium ion batteries.However,irreversible phase transitions cause structural distortion and cation rearrangement,leading to sluggish Na+dynamics and rapid capacity decay.In this study,we propose a medium-entropy cathode by simultaneously introducing Fe,Mg,and Li dopants into a typical P2-type Na_(0.75)Ni_(0.25)Mn_(0.75)O_(2)cathode.The modified Na_(0.75)Ni_(0.2125)Mn_(0.6375)Fe_(0.05)Mg_(0.05)Li_(0.05)O_(2)cathode predominantly exhibits a main P2 phase(93.5%)with a minor O3 phase(6.5%).Through spectroscopy techniques and electrochemical investigations,we elucidate the redox mechanisms of Ni^(2+/3+/4+),Mn^(3+/4+),Fe^(3+/4+),and O_(2)-/O_(2)^(n-)during charging/discharging.The medium-entropy doping mitigates the detrimental P2-O_(2)phase transition at high-voltage,replacing it with a moderate and reversible structural evolution(P2-OP4),thereby enhancing structural stability.Consequently,the modified cathode exhibits a remarkable rate capacity of 108.4 mAh·g^(-1)at 10C,with a capacity retention of 99.0%after 200 cycles at 1C,82.5%after 500 cycles at 5C,and 76.7%after 600 cycles at 10C.Furthermore,it also demonstrates superior electrochemical performance at high cutoff voltage of 4.5 V and extreme temperature(55 and 0℃).This work offers solutions to critical challenges in sodium ion batteries cathode materials.
